Results for “Structural Safety” — Page 7

USGS2001

The National Map - Missouri Pilot Project

Governments depend on a common set of geographic base information as a tool for economic and community development, land and natural resource management, and health and safety services. Emergency management and defense operations rely on this information. Private industry, nongovernmental organizations, and individual citizens use the same geographic data. Geographic information underpins an increasingly large part of the Nation's economy. Available geographic data often have the following problems: * They do not align with each other because layers are frequently created or revised separately, * They do not match across administrative boundaries because each producing organization uses different methods and standards, and * They are not up to date because of the complexity and cost of revision. The U.S. Geological Survey (USGS) is developing The National Map to be a seamless, continuously maintained, and nationally consistent set of online, public domain, geographic base information to address these issues. The National Map will serve as a foundation for integrating, sharing, and using other data easily and consistently. In collaboration with other government agencies, the private sector, academia, and volunteer groups, the USGS will coordinate, integrate, and, where needed, produce and maintain base geographic data. The National Map will include digital orthorectified imagery; elevation data; vector data for hydrography, transportation, boundary, and structure features; geographic names; and land cover information. The data will be the source of revised paper topographic maps. Many technical and institutional issues must be resolved as The National Map is implemented. To begin the refinement of this new paradigm, pilot projects are being designed to identify and investigate these issues. The pilots are the foundation upon which future partnerships for data sharing and maintenance will be built.

Fact Sheet↗

USGS2001

The National Map - Delaware Pilot Project

Governments depend on a common set of geographic base information as a tool for economic and community development, land and natural resource management, and health and safety services. Emergency management and defense operations rely on this information. Private industry, nongovernmental organizations, and individual citizens use the same geographic data. Geographic information underpins an increasingly large part of the Nation's economy. Available geographic data often have the following problems: * They do not align with each other because layers are frequently created or revised separately, * They do not match across administrative boundaries because each producing organization uses different methods and standards, and * They are not up to date because of the complexity and cost of revision. The U.S. Geological Survey (USGS) is developing The National Map to be a seamless, continuously maintained, and nationally consistent set of online, public domain, geographic base information to address these issues. The National Map will serve as a foundation for integrating, sharing, and using other data easily and consistently. In collaboration with other government agencies, the private sector, academia, and volunteer groups, the USGS will coordinate, integrate, and, where needed, produce and maintain base geographic data. The National Map will include digital orthorectified imagery; elevation data; vector data for hydrography, transportation, boundary, and structure features; geographic names; and land cover information. The data will be the source of revised paper topographic maps. Many technical and institutional issues must be resolved as The National Map is implemented. To begin the refinement of this new paradigm, pilot projects are being designed to identify and investigate these issues. The pilots are the foundation upon which future partnerships for data sharing and maintenance will be built.

Fact Sheet↗

USGS2001

The National Map - Lake Tahoe Area Pilot Project

Governments depend on a common set of geographic base information as a tool for economic and community development, land and natural resource management, and health and safety services. Emergency management and defense operations rely on this information. Private industry, nongovernmental organizations, and individual citizens use the same geographic data. Geographic information underpins an increasingly large part of the Nation's economy. Available geographic data often have the following problems: * They do not align with each other because layers are frequently created or revised separately, * They do not match across administrative boundaries because each producing organization uses different methods and standards, and * They are not up to date because of the complexity and cost of revision. The U.S. Geological Survey (USGS) is developing The National Map to be a seamless, continuously maintained, and nationally consistent set of online, public domain, geographic base information to address these issues. The National Map will serve as a foundation for integrating, sharing, and using other data easily and consistently. In collaboration with other government agencies, the private sector, academia, and volunteer groups, the USGS will coordinate, integrate, and, where needed, produce and maintain base geographic data. The National Map will include digital orthorectified imagery; elevation data; vector data for hydrography, transportation, boundary, and structure features; geographic names; and land cover information. The data will be the source of revised paper topographic maps. Many technical and institutional issues must be resolved as The National Map is implemented. To begin the refinement of this new paradigm, pilot projects are being designed to identify and investigate these issues. The pilots are the foundation upon which future partnerships for data sharing and maintenance will be built.

Fact Sheet↗

USGS2001

The National Map - Utah Transportation Pilot Project

Governments depend on a common set of geographic base information as a tool for economic and community development, land and natural resource management, and health and safety services. Emergency management and defense operations rely on this information. Private industry, nongovernmental organizations, and individual citizens use the same geographic data. Geographic information underpins an increasingly large part of the Nation's economy. Available geographic data often have the following problems: * They do not align with each other because layers are frequently created or revised separately, * They do not match across administrative boundaries because each producing organization uses different methods and standards, and * They are not up to date because of the complexity and cost of revision. The U.S. Geological Survey (USGS) is developing The National Map to be a seamless, continuously maintained, and nationally consistent set of online, public domain, geographic base information to address these issues. The National Map will serve as a foundation for integrating, sharing, and using other data easily and consistently. In collaboration with other government agencies, the private sector, academia, and volunteer groups, the USGS will coordinate, integrate, and, where needed, produce and maintain base geographic data. The National Map will include digital orthorectified imagery; elevation data; vector data for hydrography, transportation, boundary, and structure features; geographic names; and land cover information. The data will be the source of revised paper topographic maps. Many technical and institutional issues must be resolved as The National Map is implemented. To begin the refinement of this new paradigm, pilot projects are being designed to identify and investigate these issues. The pilots are the foundation upon which future partnerships for data sharing and maintenance will be built.

Fact Sheet↗

USGS2001

The National Map - Texas Pilot Project

Governments depend on a common set of geographic base information as a tool for economic and community development, land and natural resource management, and health and safety services. Emergency management and defense operations rely on this information. Private industry, nongovernmental organizations, and individual citizens use the same geographic data. Geographic information underpins an increasingly large part of the Nation's economy. Available geographic data often have the following problems: * They do not align with each other because layers are frequently created or revised separately, * They do not match across administrative boundaries because each producing organization uses different methods and standards, and * They are not up to date because of the complexity and cost of revision. The U.S. Geological Survey (USGS) is developing The National Map to be a seamless, continuously maintained, and nationally consistent set of online, public domain, geographic base information to address these issues. The National Map will serve as a foundation for integrating, sharing, and using other data easily and consistently. In collaboration with other government agencies, the private sector, academia, and volunteer groups, the USGS will coordinate, integrate, and, where needed, produce and maintain base geographic data. The National Map will include digital orthorectified imagery; elevation data; vector data for hydrography, transportation, boundary, and structure features; geographic names; and land cover information. The data will be the source of revised paper topographic maps. Many technical and institutional issues must be resolved as The National Map is implemented. To begin the refinement of this new paradigm, pilot projects are being designed to identify and investigate these issues. The pilots are the foundation upon which future partnerships for data sharing and maintenance will be built.

Fact Sheet↗

USGS2001

The National Map - Pennsylvania Pilot Project

Governments depend on a common set of geographic base information as a tool for economic and community development, land and natural resource management, and health and safety services. Emergency management and defense operations rely on this information. Private industry, nongovernmental organizations, and individual citizens use the same geographic data. Geographic information underpins an increasingly large part of the Nation's economy. Available geographic data often have the following problems: * They do not align with each other because layers are frequently created or revised separately, * They do not match across administrative boundaries because each producing organization uses different methods and standards, and * They are not up to date because of the complexity and cost of revision. The U.S. Geological Survey (USGS) is developing The National Map to be a seamless, continuously maintained, and nationally consistent set of online, public domain, geographic base information to address these issues. The National Map will serve as a foundation for integrating, sharing, and using other data easily and consistently. In collaboration with other government agencies, the private sector, academia, and volunteer groups, the USGS will coordinate, integrate, and, where needed, produce and maintain base geographic data. The National Map will include digital orthorectified imagery; elevation data; vector data for hydrography, transportation, boundary, and structure features; geographic names; and land cover information. The data will be the source of revised paper topographic maps. Many technical and institutional issues must be resolved as The National Map is implemented. To begin the refinement of this new paradigm, pilot projects are being designed to identify and investigate these issues. The pilots are the foundation upon which future partnerships for data sharing and maintenance will be built.

Fact Sheet↗

USGS2001

The National Map - Florida Pilot Project

Governments depend on a common set of geographic base information as a tool for economic and community development, land and natural resource management, and health and safety services. Emergency management and defense operations rely on this information. Private industry, nongovernmental organizations, and individual citizens use the same geographic data. Geographic information underpins an increasingly large part of the Nation's economy. Available geographic data often have the following problems: * They do not align with each other because layers are frequently created or revised separately, * They do not match across administrative boundaries because each producing organization uses different methods and standards, and * They are not up to date because of the complexity and cost of revision. The U.S. Geological Survey (USGS) is developing The National Map to be a seamless, continuously maintained, and nationally consistent set of online, public domain, geographic base information to address these issues. The National Map will serve as a foundation for integrating, sharing, and using other data easily and consistently. In collaboration with other government agencies, the private sector, academia, and volunteer groups, the USGS will coordinate, integrate, and, where needed, produce and maintain base geographic data. The National Map will include digital orthorectified imagery; elevation data; vector data for hydrography, transportation, boundary, and structure features; geographic names; and land cover information. The data will be the source of revised paper topographic maps. Many technical and institutional issues must be resolved as The National Map is implemented. To begin the refinement of this new paradigm, pilot projects are being designed to identify and investigate these issues. The pilots are the foundation upon which future partnerships for data sharing and maintenance will be built.

Fact Sheet↗

USGS2015

Evaluation of two juvenile salmon collection devices at Cowlitz Falls Dam, Washington, 2014

Collection of juvenile salmon at Cowlitz Falls Dam is a critical part of the effort to restore salmon in the upper Cowlitz River, Washington. Many of the fish that are not collected pass downstream and enter Riffe Lake, become landlocked, and are lost to the anadromous population. In addition to this loss, the juvenile fish collection system at Cowlitz Falls Dam, which originally consisted of four collection flumes, has failed to achieve annual collection goals since it began operating in 1996. In the years since, the collection flumes have been modified and prototype collection devices have been developed and tested, but these efforts have not substantially increased juvenile fish collection. Studies have shown that juvenile steelhead ( Oncorhynchus mykiss ), coho salmon ( Oncorhynchus kisutch ), and Chinook salmon ( Oncorhynchus tshawytscha ) tend to come close to the entrances of the collection system, but many of these fish fail to enter and eventually pass the dam through turbines or spillways. Tacoma Power developed a prototype weir box in 2009 to increase capture rates of juvenile salmon at the collection entrances. The device was evaluated with radio-tagged coho salmon (318 fish) and Chinook salmon (317 fish), and was found to have a high retention rate; 93 percent of the coho salmon, and 91 percent of the Chinook salmon that entered the device were retained and collected. However, because of safety concerns at the dam, the weir box could not be deployed near a spillway gate where the prototype was tested, so the device was altered and re-deployed at a different location where it was evaluated during 2013. During that year, discovery efficiency (number of fish detected at the entrance divided by the number of fish detected in the forebay) was 98 percent for tagged steelhead and 83 percent for tagged coho salmon. However, none of the steelhead and only 5 percent of the coho salmon entered and were collected through the weir box. These results indicated that the device was not a promising collection alternative during spring months when steelhead and coho salmon are passing the dam. However, collection conditions change during summer months when juvenile Chinook salmon are passing, so the device also was evaluated during summer 2014. In an attempt to improve overall collection efficiency, Tacoma Power developed and tested a new device in 2014, called the Upper Riffe Lake Collector (URLC). The URLC was a floating device designed to collect fish as they moved downstream after passing through turbines at Cowlitz Falls Dam. The design of the URLC included a pontoon barge that supported a large net structure designed to funnel fish into a live box where they could be removed and transported downstream of dams on the Cowlitz River.

Washington↗

USGS2025

Phase 1 technical implementation plan for the expansion of the ShakeAlert earthquake early warning system to Alaska

Executive Summary The conference report accompanying the fiscal year (FY) 2022 Consolidated Appropriations Act (Public Law 117–103) for the U.S. Department of the Interior and related agencies directed the U.S. Geological Survey (USGS) to “work with the State of Alaska to develop an implementation plan to be completed within two years in order to put ShakeAlert/Earthquake Early Warning in Alaska” (p. 29). Congress included $1 million in the FY 2022 appropriation to conduct this effort. The USGS Earthquake Hazards Program, along with partner organizations, has developed the ShakeAlert earthquake early warning (EEW) system for the West Coast, which currently operates in California, Oregon, and Washington. The purpose of the system and its alert delivery partners is to reduce the impact of earthquakes and save lives and property by delivering ShakeAlert-powered alerts that are transmitted to the public via mass notification technologies, and by providing more detailed data streams to institutional users and commercial service providers to trigger automated, user-specific, protective actions. ShakeAlert was designed in such a way that it could be expanded to other U.S. regions with high earthquake risk, after the build-out of seismic and geodetic networks to support ShakeAlert in a specified region is completed and the necessary funding is secured for long-term operation and maintenance. When an earthquake occurs, seismic waves radiate from the rupturing fault like waves on a pond. It is these waves that people feel as earthquake shaking and that can cause damage to structures. Using networks of ground-motion sensors and sophisticated computer algorithms, ShakeAlert can detect an earthquake seconds after it begins, calculate its location and magnitude, and estimate the resulting intensity of shaking. Early warnings of impending shaking are then sent to people and systems that may experience damaging shaking, allowing them to take appropriate protective actions. Depending on the user’s distance from the earthquake, alerts may be delivered before, during, or after the arrival of strong shaking. There will almost always be a region near the earthquake epicenter where alerts arrive after damaging shaking has begun. The ShakeAlert system updates its ground-motion estimates as an earthquake grows larger. In response to the FY 2022 congressional direction, the USGS worked with the State of Alaska to devise this implementation plan for ShakeAlert expansion to Alaska. The USGS engaged with the Alaska Division of Homeland Security and Emergency Management (DHS&EM) and the Alaska Division of Geological and Geophysical Surveys (DGGS). A cooperative agreement was awarded to the Alaska Earthquake Center (AEC) at the University of Alaska Fairbanks (UAF) for their contributions to the plan and their work coordinating with other networks in Alaska. The USGS engaged with the Alaska Seismic Hazards Safety Commission (ASHSC) throughout the process. The USGS also held a series of Alaska stakeholder engagements. The process of developing the implementation plan was facilitated by contracted staff from Corner Alliance, which is a government consulting firm. This implementation plan describes the details and estimates the costs for a Phase 1 expansion of the ShakeAlert system to Alaska. A geographically limited Phase 1 goal was chosen that covers the highest risk and most populated areas of Alaska. The areas proposed encompass the State’s main population centers and 90 percent of the State’s population. This Phase 1 design is considered very challenging and ambitious from the viewpoint of network operators. The lessons learned if this plan is implemented could be used to consider subsequent phases to expand EEW beyond Phase 1 in Alaska in the future. ShakeAlert is built on the foundation of the sensor networks and data processing infrastructure of the USGS-led Advanced National Seismic System (ANSS). This implementation plan calls for a total of 450 high-quality, real-time EEW-capable ANSS seismic stations in Alaska: 270 new stations, 160 upgraded stations, and 20 existing stations. These seismic station numbers are based on a station spacing of 10 kilometers (km) in urban areas, 20 km in seismic source areas that endanger population centers, and 40 km in other areas. The associated costs also include support for some EEW-capable global navigation satellite system (GNSS) stations, with a focus on improving warnings for large subduction zone earthquakes. For effective EEW, ShakeAlert requires low-latency, high-availability, robust telemetry links to deliver continuous, real-time data from field stations to the data centers. The Alaska data processing hardware infrastructure would follow the general design for fail-safe operation that is used for the ShakeAlert system on the West Coast. The ShakeAlert architecture uses two independent layers: the production layer for earthquake processing and the alert layer to make alerting decisions and serve alerts to users. This implementation plan includes two geographically separated data centers in Alaska, each with two fully independent production and alert layers using the same system design developed for the West Coast. As of March 2024, the ShakeAlert system is at version 3.0.1, with more advanced versions in the development and testing pipeline. ShakeAlert originally used two algorithms to determine the location and magnitude of earthquakes using seismic data. A third algorithm that can calculate very large magnitudes of very large earthquakes with geodetic data was added in March 2024. ShakeAlert publishes several data and alert products to meet the needs of different users. All messages include the location of the earthquake, either as a point or a line, and its magnitude. Ground-shaking estimates are published in two forms, as ground-motion contours and a map grid. Providing adequate warning time for strong shaking (the “target threshold”) requires sending alerts at a threshold lower than that strong shaking level (the “alert threshold”). The thresholds for public alerting in Alaska would be a joint USGS and State decision. To have the greatest benefit, ShakeAlert-powered alerts would be delivered to institutional users and individuals by all practical pathways. The USGS alert layer can support thousands of institutional users and alert redistributors, but the USGS does not have the mission nor the infrastructure and expertise to perform mass notifications to the public or implement automatic actions for end users of the alerts. To meet this need, ShakeAlert recruits private sector “technology enablers” that have the necessary expertise to develop end-user implementations using EEW alerts with the goal of stimulating an EEW industry. Earthquake early warning alerts are useless if people do not know how to respond to them. Although the alert messages include instructions about what to do (drop, cover, and hold on), alerts are more effective if people have been trained in advance. Messages about ShakeAlert’s capabilities, limitations, and benefits could be integrated with existing earthquake education programs, including State-run programs. Therefore, ShakeAlert would coordinate with both public and private partners and stakeholders through various partnerships and agreements to accomplish consistent and ongoing public earthquake hazard education. The estimated capital cost of completing the computing infrastructure and sensor networks for the Phase 1 ShakeAlert expansion to Alaska is approximately $66 million in 2024 dollars. The annual operation and maintenance cost of the completed system is estimated to be $12 million per year in 2024 dollars when fully built out.

Alaska↗

USGS2007

Natural gases in ground water near Tioga Junction, Tioga County, north-central Pennsylvania: Occurrence and use of isotopes to determine origins, 2005

In January 2001, State oil and gas inspectors noted bubbles of natural gas in well water during a complaint investigation near Tioga Junction, Tioga County, north-central Pa. By 2004, the gas occurrence in ground water and accumulation in homes was a safety concern; inspectors were taking action to plug abandoned gas wells and collect gas samples. The origins of the natural-gas problems in ground water were investigated by the U.S. Geological Survey, in cooperation with the Pennsylvania Department of Environmental Protection, in wells throughout an area of about 50 mi2, using compositional and isotopic characteristics of methane and ethane in gas and water wells. This report presents the results for gas-well and water-well samples collected from October 2004 to September 2005. Ground water for rural-domestic supply and other uses near Tioga Junction is from two aquifer systems in and adjacent to the Tioga River valley. An unconsolidated aquifer of outwash sand and gravel of Quaternary age underlies the main river valley and extends into the valleys of tributaries. Fine-grained lacustrine sediments separate shallow and deep water-bearing zones of the outwash. Outwash-aquifer wells are seldom deeper than 100 ft. The river-valley sediments and uplands adjacent to the valley are underlain by a fractured-bedrock aquifer in siliciclastic rocks of Paleozoic age. Most bedrock-aquifer wells produce water from the Lock Haven Formation at depths of 250 ft or less. A review of previous geologic investigations was used to establish the structural framework and identify four plausible origins for natural gas. The Sabinsville Anticline, trending southwest to northeast, is the major structural feature in the Devonian bedrock. The anticline, a structural trap for a reservoir of deep native gas in the Oriskany Sandstone (Devonian) (origin 1) at depths of about 3,900 ft, was explored and tapped by numerous wells from 1930-60. The gas reservoir in the vicinity of Tioga Junction, depleted of native gas, was converted to the Tioga gas-storage field for injection and withdrawal of non-native gases (origin 2). Devonian shale gas (shallow native gas) also has been reported in the area (origin 3). Gas might also originate from microbial degradation of buried organic material in the outwash deposits (origin 4). An inventory of combustible-gas concentrations in headspaces of water samples from 91 wells showed 49 wells had water containing combustible gases at volume fractions of 0.1 percent or more. Well depth was a factor in the observed occurrence of combustible gas for the 62 bedrock wells inventoried. As well-depth range increased from less than 50 ft to 51-150 ft to greater than 151 ft, the percentage of bedrock-aquifer wells with combustible gas increased. Wells with high concentrations of combustible gas occurred in clusters; the largest cluster was near the eastern boundary of the gas-storage field. A subsequent detailed gas-sampling effort focused on 39 water wells with the highest concentrations of combustible gas (12 representing the outwash aquifer and 27 from the bedrock aquifer) and 8 selected gas wells. Three wells producing native gas from the Oriskany Sandstone and five wells (two observation wells and three injection/withdrawal wells) with non-native gas from the gas-storage field were sampled twice. Chemical composition, stable carbon and hydrogen isotopes of methane (13CCH4 and DCH4), and stable carbon isotopes of ethane (13CC2H6) were analyzed. No samples could be collected to document the composition of microbial gas originating in the outwash deposits (outwash or 'drift' gas) or of native natural gas originating solely in Devonian shale at depths shallower than the Oriskany Sandstone, although two of the storage-field observation wells sampled reportedly yielded some Devonian shale gas. Literature values for outwash or 'drift' gas and Devonian shale gases were used to supplement the data collection. Non-native gases fr

Pennsylvania↗

USGS2012

Spatial ecology of refuge selection by an herbivore under risk of predation

Prey species use structures such as burrows to minimize predation risk. The spatial arrangement of these resources can have important implications for individual and population fitness. For example, there is evidence that clustered resources can benefit individuals by reducing predation risk and increasing foraging opportunity concurrently, which leads to higher population density. However, the scale of clustering that is important in these processes has been ignored during theoretical and empirical development of resource models. Ecological understanding of refuge exploitation by prey can be improved by spatial analysis of refuge use and availability that incorporates the effect of scale. We measured the spatial distribution of pygmy rabbit (Brachylagus idahoensis) refugia (burrows) through censuses in four 6-ha sites. Point pattern analyses were used to evaluate burrow selection by comparing the spatial distribution of used and available burrows. The presence of food resources and additional overstory cover resources was further examined using logistic regression. Burrows were spatially clustered at scales up to approximately 25 m, and then regularly spaced at distances beyond ~40 m. Pygmy rabbit exploitation of burrows did not match availability. Burrows used by pygmy rabbits were likely to be located in areas with high overall burrow density (resource clusters) and high overstory cover, which together minimized predation risk. However, in some cases we observed an interaction between either overstory cover (safety) or understory cover (forage) and burrow density. The interactions show that pygmy rabbits will use burrows in areas with low relative burrow density (high relative predation risk) if understory food resources are high. This points to a potential trade-off whereby rabbits must sacrifice some safety afforded by additional nearby burrows to obtain ample forage resources. Observed patterns of clustered burrows and non-random burrow use improve understanding of the importance of spatial distribution of refugia for burrowing herbivores. The analyses used allowed for the estimation of the spatial scale where subtle trade-offs between predation avoidance and foraging opportunity are likely to occur in a natural system.

Ecosphere↗

USGS1985

Environmental systems and management activities on the Kennedy Space Center, Merritt Island, Florida: results of a modeling workshop

In the early 1960's, the National Aeronautics and Space Administration (NASA) began purchasing 140,000 acres on Merritt Island, Florida, in order to develop a center for space exploration. Most of this land was acquired to provide a safety and security buffer around NASA facilities. NASA, as the managing agency for the Kennedy Space Center (KSC), is responsible for preventing or controlling environmental pollution from the Federal facilities and activities at the Space Center and is committed to use all practicable means to protect and enhance the quality of the surrounding environment. The Merritt Island National Wildlife Refuge was established in 1963 when management authority for undeveloped lands at KSC was transferred to the U.S. Fish and Wildlife Service. In addition to manage for 11 Federally-listed threatened and endangered species and other resident and migratory fish and wildlife populations, the Refuge has comanagement responsibility for 19,000 acres of mosquito control impoundments and 2,500 acres of citrus groves. The Canaveral National Seashore was developed in 1975 when management of a portion of the coastal lands was transferred from NASA to the National Park Service. This multiagency jurisdiction on Merritt Island has resulted in a complex management environment. The modeling workshop described in this report was conducted May 21-25, 1984, at the Kennedy Space Center to: (1) enhance communication among the agencies with management responsibilities on Merritt Island; (2) integrate available information concerning the development, management, and ecology of Merritt Island; and (3) identify key research and monitoring needs associated with the management and use of the island's resources. The workshop was structured around the formulation of a model that would simulate primary management and use activities on Merritt Island and their effects on upland, impoundment, and estuarine vegetation and associated wildlife. The simulation model is composed of four connected submodels. The Uplands submodel calculates changes in acres and structural components of vegetation communities resulting from succession, fire, facilities development, and shuttle launch depositions, as well as the quantity and quality of surface runoff and aquifer input to an impoundment and an estuary. The Impoundment submodel next determines water quality and quantity and changes in vegetation resulting from water level manipulation and prescribed burning. The Estuary submodel than determines water quality parameters and acres of seagrass beds. Finally, the Wildlife submodel calculates habitat suitability indices for key species of interest, based on vegetation conditions in the uplands and impoundments and on several hydrologic parameters. The model represents a hypothetical management unit with 2,500 acres of uplands, a 600-acre impoundment, and a 1,500-acre section of estuary. Two management scenarios were run to analyze model behavior. The scenarios differ in the frequency of shuttle launches and prescribed burning, the extent of facilities development, the amount of land disposed waste material applied, and the nature and timing of impoundment water level control. Early in a model development project, the process of building the model is usually of greater benefit than the model itself. The model building process stimulates interaction among agencies, assists in integrating existing information, and helps identify research needs. These benefits usually accrue even in the absence of real predictive power in the resulting model. Open communication occurs among the Federal, State, and local agencies involved with activities on Merritt Island and the agencies have a cooperative working relationship. The workshop provided an opportunity for all of these agencies to meet at one time and have focused discussions on the key environmental and multiagency resource management issues. The workshop framework helped to integrate information and assumptions from a number of disciplines and agencies. This integration occurred in the computer simulation model and among workshop participants as submodel linkages were developed and scenario results discussed. A number of research needs were identified at the workshop during the model building and testing exercises and associated discussions. These needs were based on the informed judgement of researchers and managers familiar with Merritt Island or similar areas, rather than on a comprehensive literature review of sensitivity analysis of the preliminary model developed at the workshop. Some of the needs can be addressed by interpreting the results of completed studies from similar geographic areas as they relate to Merritt Island, while other will require additional research studies on Merritt Island. Major research needs associated with the Upland submodel include behavior of the near-surface aquifer, factors limiting slash pine regeneration, frequency and effects of natural fire on various cover types, cumulative effects of shuttle launches, and fate in upland soils of nitrogen and phosphorous from land applied waste material. Key Impoundment submodel needs include documentation of vegetation changes in response to altered water depth, salinity, and nutrient concentrations and better specification of the functional characteristics of impoundments as chemical filters. Important information gaps identified in the Estuary submodel include a more complete analysis of factors contributing to phytoplankton abundance, evaluation of sources of turbidity other than phytoplankton, and identification and quantification of factors limiting seagrass distribution. Primary research needs associated with the Wildlife submodel include a survey of breeding habitat, production data, and harvest data for mottled ducks; data on the emigration and immigration of juvenile mullet (and other transient fish) in the impoundment; the contribution of various seagrasses to habitat requirements of sea trout; and the effects of dissolved oxygen on survival of juvenile sea trout. Ideally, the modeling workshop process is iterative in nature. Periods between workshops are used for research, data collection, and model refinement. Each workshop integrates information collected since the last workshop and produces a more credible model that is more useful in evaluating management alternatives. Participants felt that continued application of this process would help provide ongoing integration and communication among agencies and would allow each agency's planning and management activities to be viewed within the context of an overall assessment.

Report↗

USGS2009

Preparing a population for an earthquake like Chi-Chi: The Great Southern California ShakeOut

The Great Southern California ShakeOut was a week of special events featuring the largest earthquake drill in United States history. On November 13, 2008, over 5 million southern Californians pretended that a magnitude-7.8 earthquake had occurred and practiced actions that could reduce its impact on their lives. The primary message of the ShakeOut is that what we do now, before a big earthquake, will determine what our lives will be like after. The drill was based on a scenario of the impacts and consequences of such an earthquake on the Southern San Andreas Fault, developed by over 300 experts led by the U.S. Geological Survey in partnership with the California Geological Survey, the Southern California Earthquake Center, Earthquake Engineering Research Institute, lifeline operators, emergency services and many other organizations. The ShakeOut campaign was designed and implemented by earthquake scientists, emergency managers, sociologists, art designers and community participants. The means of communication were developed using results from sociological research on what encouraged people to take action. This was structured around four objectives: 1) consistent messages – people are more inclined to believe something when they hear the same thing from multiple sources; 2) visual reinforcement – people are more inclined to do something they see other people doing; 3) encourage “milling” or discussing contemplated action – people need to discuss an action with others they care about before committing to undertaking it; and 4) focus on concrete actions – people are more likely to prepare for a set of concrete consequences of a particular hazard than for an abstract concept of risk. The goals of the ShakeOut were established in Spring 2008 and were: 1) to register 5 million people to participate in the drill; 2) to change the culture of earthquake preparedness in southern California; and 3) to reduce earthquake losses in southern California. All of these goals were met. The final registration at www.shakeout.org for the 2008 ShakeOut was 5.47 million people, or one-quarter of the population of the region. A survey conducted with the registered participants showed that the messages they took from the ShakeOut were the concepts intended, including the importance of “Drop, Cover, Hold On”, the interdependency of earthquake risk (“We are all in this together”) and the possibility of reducing losses through preparation and mitigation. Sales data from the Home Depot hardware stores in southern California showed a 260% increase in the sale of earthquake safety products during the month of the ShakeOut, November 2008.

California↗

USGS2019

To forage or flee: Lessons from an elk migration near a protected area

Alteration of wide-ranging wildlife migrations can drastically impact the structure and function of ecosystems, yet the causes and consequences of shifting migration patterns remain largely unknown. Management decisions made in one portion of a landscape may induce spatial and temporal shifts of wildlife use in another, creating tension among private, state, and federal lands with varying missions. Recent declines in migratory behavior have initiated studies focused primarily on spring migration, but the timing and benefits of autumn migration have received limited attention due to the difficulty in assessing the extreme asynchrony in autumnal events, although nutrition during this time period is crucial to winter survival and reproduction. Here, we used five years of data from 73 female elk (Cervus canadensis) which utilize a landscape managed by 4 federal agencies, a state, and private landowners, to identify the driving factors behind the initiation of fall migration in two subpopulations, one of which migrates to a protected area where hunting is prohibited. Most elk departed summer range prior to frost or snow, with 67% of elk that used the protected area migrating prior to the onset of archery hunting season (1 September), preemptively avoiding risk, while no elk from the other subpopulation left prior to archery season. However, departure from productive summer range prior to frost or snow, nearly two months before vegetation senescence led to an important tradeoff. Early migrants gave up 0.30% of late summer-fall integrated NDVI (iNDVI) per day when they moved to the safety of the protected area, leading to an average difference of 15.81% in iNDVI between an individual departing on 30 August (the mean departure date) versus an individual departing on 1 November. Our results suggest that in areas where migratory ungulates span multiple jurisdictions, the benefits of migratory behavior may be dramatically impacted by unevenly distributed anthropogenic disturbance. As this is a common scenario globally, our work highlights the urgent need to improve our understanding of subtle changes in migratory behavior, both spatially and temporally, which may erode the resilience of migration to future change.

Wyoming↗

USGS2012

Global exploration and production capacity for platinum-group metals from 1995 through 2015

Platinum-group metals (PGMs) are required in a variety of commercial, industrial, and military applications for many existing and emerging technologies, yet the United States is highly dependent on foreign sources of PGMs. Information on global exploration for PGMs since 1995 has been used in this study as a basis for identifying locations where the industry has determined that exploration has provided data sufficient to warrant development of a new mine or expansion of an existing operation or where a significant increase in capacity for PGMs is anticipated by 2015. Discussions include an overview of the industry and the selected sites, factors affecting mineral supply, and circumstances leading to the development of mineral properties with the potential to affect mineral supply. Of the 52 sites or regional operations that were considered in this analysis, 16 sites were producing before 1995, 28 sites commenced production from 1995 through 2010, and 8 sites were expected to begin production from 2011 through 2015 if development plans came to fruition. The United States imports PGMs primarily from Canada, Russia, South Africa, and Zimbabwe to meet increasing demand for these materials in a variety of specialized and high-tech applications. Feed sources of PGMs are changing in South Africa and Russia, which together accounted for about 89 percent of platinum production and 82 percent of palladium production in 2009. A greater amount of South African PGM capacity is likely to come from deeper, higher cost Upper Group Reef seam 2 deposits and deposits in the Eastern Bushveld area. Future Russian PGM capacity is likely to come from ore zones with generally lower PGM content and different platinum-to-palladium ratios than the nickel-rich ore that dominated PGM supply in the 1990s. Because PGM supply from Canada and Russia is derived as a byproduct of copper and nickel mining, the PGM supply from these countries is influenced by economic, environmental, political, and technological factors affecting exploration for and development of copper and nickel, as well as factors affecting the PGM industry. The recovery of PGMs from mill tailings since 2004 and the recycling of PGMs from catalytic converters, electrical components, and jewelry has increased since 1995 so that recycled PGMs recovered from these products accounted for about 30 percent of the supply of platinum worldwide and 29 percent of the supply of palladium worldwide in 2010. Economic and geopolitical conditions have influenced PGM supply and demand. The global recession of 2008 and 2009 temporarily decreased demand for PGMs and constrained PGM mine exploration and development, at least through 2010. Legislation regulating the structure of the mining sector has affected mining in Russia, South Africa, and Zimbabwe. Stricter vehicle emissions standards in established markets since the 1980s have led to mandatory use of pollution control devices, such as catalytic converters, that contain PGMs and are required on vehicles in expanding markets, such as China and India. It is expected that South Africa, Russia, Canada, and Zimbabwe will continue to be the principal sources of PGM at least for the next decade. Based on this review of the PGM industry, the world’s platinum capacity, expressed in terms of recoverable platinum metal, increased from 1995 through 2010 by 77,000 kilograms (kg) in South Africa, 9,000 kg in Zimbabwe, 6,000 kg in Russia, 2,000 kg in Botswana, and 2,000 kg in Canada. For the same period, palladium capacity worldwide increased by 44,000 kg in South Africa, 22,000 kg in Russia, 8,000 kg in Canada, 8,000 kg in the United States, 7,000 kg in Zimbabwe, and 3,000 kg in Botswana. Platinum capacity worldwide is expected to further increase by 24,000 kg in South Africa, 9,000 kg in Russia, 3,000 kg in Canada, and 2,000 kg in Zimbabwe from 2011 through 2015. Palladium capacity worldwide is likewise expected to increase an additional 16,000 kg in Russia, 14,000 kg in South Africa, 4,000 kg in Zimbabwe, and 1,000 kg in Canada if new or expanded mine and associated processing capacity comes into production as planned. It is likely that the magnitude of these changes in PGM capacity has been influenced by such factors as the global economy, electrical capacity shortages and mine safety concerns in South Africa, and geopolitical conditions in the major PGM producing countries.

Scientific Investigations Report↗

USGS1973

Summary of seismic activity and its relation to geology and mining in the Sunnyside mining district, Carbon and Emery Counties, Utah, during 1967-1970

In the Sunnyside mining district, Utah, coal is mined under thick and variable overburden which is locally weakened by faults and other structural discontinuities. Stress changes and local stress concentrations produced by mining under these conditions often cause sudden and violent ruptures in the coal and surrounding rock mass. The strain energy released by this type of failure, which can produce shock waves and may discharge coal and rock with explosive force, is often a serious threat to life and property. These releases of strain energy are called bumps or bounces by miners if they occur in the coal, and rock bursts if they occur in the surrounding rock mass. Many of these releases are so violent that they generate seismic waves that can be felt, or at least detected by seismic instruments, miles from the site of the rupture, whereas others are smaller and can be detected only by those sensitive seismic instruments within a few thousand feet of the site of the rupture. In 1969 and 1970, about 27,000 and about 15,000 earth tremors, respectively, were recorded by the five-station seismic monitoring network that is located at the surface and encompasses most of the mine workings in the district. Of these totals, 512 and 524 earth tremors, respectively, were of sufficient magnitude (greater than 1. 5 on the Richter scale) so that the hypocenters could be accurately located. In 1968 about 20,000 tremors were recorded, with 281 large enough to plot, but in 1967 over 50,000 were recorded, of which 540 were plotted. In this report we discuss the way in which seismic activity, geology, and mining are related or seem to be related for the period 1967 through 1970, with emphasis on the period 1969-70. We also suggest certain mining procedures which, based on studies during the period, might increase the safety and efficiency of mining operations in the Sunnyside district. A complete tabulation of the larger magnitude earth tremors which occurred during 1969-70 and descriptions of how they relate to mining are given in the appendix. Similar tabulations and descriptions for 1967 and 1968 are available in earlier reports (Barnes and others, 1969; Dunrud and others, 1970).

Open-File Report↗

USGS2009

Understanding CO 2 Plume Behavior and Basin-Scale Pressure Changes during Sequestration Projects through the use of Reservoir Fluid Modeling

Large scale geologic sequestration tests are in the planning stages around the world. The liability and safety issues of the migration of CO 2 away from the primary injection site and/or reservoir are of significant concerns for these sequestration tests. Reservoir models for simulating single or multi-phase fluid flow are used to understand the migration of CO 2 in the subsurface. These models can also help evaluate concerns related to brine migration and basin-scale pressure increases that occur due to the injection of additional fluid volumes into the subsurface. The current paper presents different modeling examples addressing these issues, ranging from simple geometric models to more complex reservoir fluid models with single-site and basin-scale applications. Simple geometric models assuming a homogeneous geologic reservoir and piston-like displacement have been used for understanding pressure changes and fluid migration around each CO 2 storage site. These geometric models are useful only as broad approximations because they do not account for the variation in porosity, permeability, asymmetry of the reservoir, and dip of the beds. In addition, these simple models are not capable of predicting the interference between different injection sites within the same reservoir. A more realistic model of CO 2 plume behavior can be produced using reservoir fluid models. Reservoir simulation of natural gas storage reservoirs in the Illinois Basin Cambrian-age Mt. Simon Sandstone suggest that reservoir heterogeneity will be an important factor for evaluating storage capacity. The Mt. Simon Sandstone is a thick sandstone that underlies many significant coal fired power plants (emitting at least 1 million tonnes per year) in the midwestern United States including the states of Illinois, Indiana, Kentucky, Michigan, and Ohio. The initial commercial sequestration sites are expected to inject 1 to 2 million tonnes of CO 2 per year. Depending on the geologic structure and permeability anisotropy, the CO 2 injected into the Mt. Simon are expected to migrate less than 3 km. After 30 years of continuous injection followed by 100 years of shut-in, the plume from a 1 million tonnes a year injection rate is expected to migrate 1.6 km for a 0 degree dip reservoir and over 3 km for a 5 degree dip reservoir. The region where reservoir pressure increases in response to CO 2 injection is typically much larger than the CO 2 plume. It can thus be anticipated that there will be basin wide interactions between different CO 2 injection sources if multiple, large volume sites are developed. This interaction will result in asymmetric plume migration that may be contrary to reservoir dip. A basin- scale simulation model is being developed to predict CO 2 plume migration, brine displacement, and pressure buildup for a possible future sequestration scenario featuring multiple CO 2 storage sites within the Illinois Basin Mt. Simon Sandstone. Interactions between different sites will be evaluated with respect to impacts on pressure and CO 2 plume migration patterns. ?? 2009 Elsevier Ltd. All rights reserved.

Conference Paper↗

USGS2012

Conceptualization of the predevelopment groundwater flow system and transient water-level responses in Yucca Flat, Nevada National Security Site, Nevada

Contaminants introduced into the subsurface of Yucca Flat, Nevada National Security Site, by underground nuclear testing are of concern to the U.S. Department of Energy and regulators responsible for protecting human health and safety. The potential for contaminant movement away from the underground test areas and into the accessible environment is greatest by groundwater transport. The primary hydrologic control on this transport is evaluated and examined through a set of contour maps developed to represent the hydraulic-head distribution within the two major aquifer systems underlying the area. Aquifers and confining units within these systems were identified and their extents delineated by merging and analyzing hydrostratigraphic framework models developed by other investigators from existing geologic information. Maps of the hydraulic-head distributions in the major aquifer systems were developed from a detailed evaluation and assessment of available water-level measurements. The maps, in conjunction with regional and detailed hydrogeologic cross sections, were used to conceptualize flow within and between aquifer systems. Aquifers and confining units are mapped and discussed in general terms as being one of two aquifer systems: alluvial-volcanic or carbonate. The carbonate aquifers are subdivided and mapped as independent regional and local aquifers, based on the continuity of their component rock. Groundwater flow directions, approximated from potentiometric contours, are indicated on the maps and sections and discussed for the alluvial-volcanic and regional carbonate aquifers. Flow in the alluvial-volcanic aquifer generally is constrained by the bounding volcanic confining unit, whereas flow in the regional carbonate aquifer is constrained by the siliceous confining unit. Hydraulic heads in the alluvial-volcanic aquifer typically range from 2,400 to 2,530 feet and commonly are elevated about 20-100 feet above heads in the underlying regional carbonate aquifer. Flow directions in the alluvial-volcanic aquifer are variable and are controlled by localized areas where small amounts of water can drain into the regional carbonate aquifer. These areas commonly are controlled by geologic structures, such as Yucca fault. Flow in the regional carbonate aquifer generally drains to the center of the basin; from there flow is to the south-southeast out of the study area toward downgradient discharge areas. Southward flow in the regional carbonate aquifer occurs in a prominent potentiometric trough that results from a faulted zone of enhanced permeability centered about Yucca fault. Vertical hydraulic gradients between the aquifer systems are downward throughout the study area; however, flow from the alluvial-volcanic aquifer into the underlying carbonate aquifer is believed to be minor because of the intervening confining unit. Transient water levels were identified and analyzed to understand hydraulic responses to stresses in Yucca Flat. Transient responses have only a minimal influence on the general predevelopment flow directions in the aquifers. The two primary anthropogenic stresses on the groundwater system since about 1950 are nuclear testing and pumping. Most of the potentiometric response in the aquifers to pumping or past nuclear testing is interim and localized. Persistent, long-lasting changes in hydraulic head caused by nuclear testing occur only in confining units where groundwater fluxes are negligible. A third stress on the groundwater system is natural recharge, which can cause minor, short- and long-term changes in water levels. Long-term hydrographs affected by natural recharge, grouped by similar trend, cluster in distinct areas of Yucca Flat and are controlled primarily by spatial differences in local recharge patterns.

Nevada↗