Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Special Publication”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources
USGS2009

Accretionary orogens through Earth history

Accretionary orogens form at intraoceanic and continental margin convergent plate boundaries. They include the supra-subduction zone forearc, magmatic arc and back-arc components. Accretionary orogens can be grouped into retreating and advancing types, based on their kinematic framework and resulting geological character. Retreating orogens (e.g. modern western Pacific) are undergoing long-term extension in response to the site of subduction of the lower plate retreating with respect to the overriding plate and are characterized by back-arc basins. Advancing orogens (e.g. Andes) develop in an environment in which the overriding plate is advancing towards the downgoing plate, resulting in the development of foreland fold and thrust belts and crustal thickening. Cratonization of accretionary orogens occurs during continuing plate convergence and requires transient coupling across the plate boundary with strain concentrated in zones of mechanical and thermal weakening such as the magmatic arc and back-arc region. Potential driving mechanisms for coupling include accretion of buoyant lithosphere (terrane accretion), flat-slab subduction, and rapid absolute upper plate motion overriding the downgoing plate. Accretionary orogens have been active throughout Earth history, extending back until at least 3.2 Ga, and potentially earlier, and provide an important constraint on the initiation of horizontal motion of lithospheric plates on Earth. They have been responsible for major growth of the continental lithosphere through the addition of juvenile magmatic products but are also major sites of consumption and reworking of continental crust through time, through sediment subduction and subduction erosion. It is probable that the rates of crustal growth and destruction are roughly equal, implying that net growth since the Archaean is effectively zero.

Geological Society Special Publication↗
USGS2011

Global Positioning System constraints on crustal deformation before and during the 21 February 2008 Wells, Nevada M6.0 earthquake

Using Global Positioning System (GPS) data from permanent sites and U.S. Geological Survey (USGS) campaign data we have estimated co-seismic displacements and secular background crustal deformation patterns associated with the 21 February 2008 Wells Nevada earthquake. Estimated displacements at nearby permanent GPS sites ELKO (84 km distant) and GOSH (81 km distant) are 1.0±0.2 mm and 1.1±0.3 mm, respectively. The magnitude and direction are in agreement with those predicted from a rupture model based on InSAR measurements of the near-field co-seismic surface displacement. Analysis of long GPS time series (>10 years) from the permanent sites within 250 km of the epicenter indicate the eastern Nevada Basin and Range undergoes steady tectonic transtension with rates on the order of 1 mm/year over approximately 250 km. The azimuth of maximum horizontal crustal extension is consistent with the azimuth of the Wells earthquake co-seismic slip vector. The orientation of crustal shear is consistent with deformation associated with Pacific/North America plate boundary relative motion seen elsewhere in the Basin and Range. In response to the event, we deployed a new GPS site with the capability to telemeter high rate, low latency data that will in the future allow for rapid estimation of surface displacement should aftershocks or postseismic deformations occur. We estimated co-seismic displacements using campaign GPS data collected before and after the event, however in most cases their uncertainties were larger than the offsets. Better precision in co-seismic displacement could have been achieved for the campaign sites if they had been surveyed more times or over a longer interval to better estimate their pre-event velocity.

Nevada↗
USGS2011

Geophysical setting of the February 21, 2008 Mw 6 Wells earthquake, Nevada, and implications for earthquake hazards

We utilize gravity and magnetic methods to investigate the regional geophysical setting of the Wells earthquake. In particular, we delineate major crustal structures that may have played a role in the location of the earthquake and discuss the geometry of a nearby sedimentary basin that may have contributed to observed ground shaking. The February 21, 2008 M w 6.0 Wells earthquake, centered about 10 km northeast of Wells, Nevada, caused considerable damage to local buildings, especially in the historic old town area. The earthquake occurred on a previously unmapped normal fault and preliminary relocated events indicate a fault plane dipping about 55 degrees to the southeast. The epicenter lies near the intersection of major Basin and Range normal faults along the Ruby Mountains and Snake Mountains, and strike-slip faults in the southern Snake Mountains. Regionally, the Wells earthquake epicenter is aligned with a crustal-scale boundary along the edge of a basement gravity high that correlates to the Ruby Mountains fault zone. The Wells earthquake also occurred near a geophysically defined strike-slip fault that offsets buried plutonic rocks by about 30 km. In addition, a new depth-to-basement map, derived from the inversion of gravity data, indicates that the Wells earthquake and most of its associated aftershock sequence lie below a small oval- to rhomboid-shaped basin, that reaches a depth of about 2 km. Although the basin is of limited areal extent, it could have contributed to increased ground shaking in the vicinity of the city of Wells, Nevada, due to basin amplification of seismic waves.

Nevada↗
USGS2011

The regional structural setting of the 2008 Wells earthquake and Town Creek Flat Basin: implications for the Wells earthquake fault and adjacent structures

The 2008 Wells earthquake occurred on a northeast-striking, southeast-dipping fault that is clearly delineated by the aftershock swarm to a depth of 10-12 km below sea level. However, Cenozoic rocks and structures around Wells primarily record east-west extension along north- to north-northeast-striking, west-dipping normal faults that formed during the middle Miocene. These faults are responsible for the strong eastward tilt of most basins and ranges in the area, including the Town Creek Flat basin (the location of the earthquake) and the adjacent Snake Mountains and western Windermere Hills. These older west-dipping faults are locally overprinted by a younger generation of east-dipping, high-angle normal faults that formed as early as the late Miocene and have remained active into the Quaternary. The most prominent of these east-dipping faults is the set of en-échelon, north-striking faults that bounds the east sides of the Ruby Mountains, East Humboldt Range, and Clover Hill (about 5 km southwest of Wells). The northeastern-most of these faults, the Clover Hill fault, projects northward along strike toward the Snake Mountains and the approximately located surface projection of the Wells earthquake fault as defined by aftershock locations. The Clover Hill fault also projects toward a previously unrecognized, east-facing Quaternary fault scarp and line of springs that appear to mark a significant east-dipping normal fault along the western edge of Town Creek Flat. Both western and eastern projections may be northern continuations of the Clover Hill fault. The Wells earthquake occurred along this east-dipping fault system. Two possible alternatives to rupture of a northern continuation of the Clover Hill fault are that the earthquake fault (1) is antithetic to an active west-dipping fault or (2) reactivated a Mesozoic thrust fault that dips east as a result of tilting by the west-dipping faults along the west side of the Snake Mountains. Both alternatives are precluded by the depths of the earthquake and aftershocks, about 8 km and as deep as 12 km, respectively. These depths are below where an antithetic fault would intersect any main fault, and a tilted, formerly shallow and sub-horizontal thrust fault would not extend to depths of more than about 5–6 km. The east-dipping, high-angle, earthquake fault cuts older west-dipping faults rather than reactivating them, highlighting a change in the structural style of Basin and Range extension in this region from closely-spaced, west-dipping faults that rotated significantly during slip and accommodated large-magnitude extension, to widely-spaced, high-angle faults that accommodate much less total strain over a long time span.

Nevada↗
USGS1982

The availability of conventional forms of remotely sensed data

For decades Federal and State agencies have been collecting aerial photographs of various film types and scales over parts of the United States. More recently, worldwide Earth resources data acquired by orbiting satellites have inundated the remote sensing community. Determining the types of remotely sensed data that are publicly available can be confusing to the land-resource manager, planner, and scientist. This paper is a summary of the more commonly used types of remotely sensed data (aircraft and satellite) and their public availability. Special emphasis is placed on the National High-Altitude Photography (NHAP) program and future remote-sensing satellites.

Journal of Applied Photographic Engineering↗
USGS1980

Trends in the distribution of recent foraminifera in San Francisco Bay

Much of the bathymetry of the southern part of San Francisco Bay reflects the drainage pattern of late Pleistocene streams. Holocene estuarine silt and clay cover most of the bay floor; relict eolian and deltaic sand occurs along the eastern shore; sandy patches are present in the main channel owing to higher tidal current velocities. Organic content is high along the western shore, where tidal flats are extensive, and in the slough at the mouth of Coyote Creek where wastewaters discharge. Thirty-one species of benthonic foraminifera were identified in surficial sediments of San Francisco Bay estuary; of these, 20 species were stained red by rose Bengal and are considered as live. Water depth, sediment textural characteristics, salinity, organic matter, sediment pH, and biological competition were considered as factors that might affect distribution of foraminifera. Four ecologic zones based on observed trends in the distribution and abundance of several species correlate well with some environmental factors. Four groups based on the Q-mode analysis of frequency counts of foraminiferal assemblages are reasonably similar to the four ecologic zones. These zones, showing restricted depth ranges, are: Inner Coastal Zone, where Elphidium incertum obscurum and Trochammina infiata are prominent; Outer Coastal Zone, dominated by Ammonia beccarii tepida and Elphidium incatum; Deep Bay Zone, where Elphidietla hannai, Elphidium incertum clavatum, Hopkinsina pacifica, and Bolivina spp. appear in abundance; and Deep Channel Zone, where Elphidiella hannai is most abundant. In the Inner Coastal Zone, salinity due to large fluctuations is a limiting factor for many species. Substrate textural characteristics are primary determinants of the distribution of agglutinated foraminifers. The percentage of organic matter in the sediment correlates well with the abundance of Elphidium incertum obscurum, a ubiquitous species in San Francisco Bay. Sediment pH is not critical. Biologic competition can be estimated by comparing the percentage of a species with the number of species present in the assemblage, as shown for Ammonia beccarii tepida and Elphidiella hannai.

California↗
USGS1994

Bottom-sediment chemistry in Devil's Lake, northeast North Dakota

Devils Lake is a 200 km 2 terminal lake that contains sodium sulfate type water. Dissolved solids concentrations range from about 3,500 mg/L to 10,000 mg/L depending on location To investigate geochemical processes in the bottom sediments of Devils Lake, sediment cores were collected at two sites in the western half of the lake during a period of bottom water oxygen depletion. The upper 10 cm of the sediments consist of about 60 weight percent silicates (quartz, feldspar, and clays) 35 weight percent carbonates and 5 weight percent organic material. At depths between 1 and 3 cm in the sediments bacterial sulfate reduction and associated degradation of organic material cause minima in sulfate concentrations and δ 13 C values of dissolved inorganic carbon and maxima in alkalinity, ammonia, phosphate, and sulfide concentrations and δ 34 S values of dissolved sulfate. Downward increases of sodium, magnesium, potassium, and calcium concentrations result from upward diffusion of ions from saline pore water and dissolving sulfate minerals below 30 cm depth in the sediments. High magnesium calcite 8 mole percent MgCO 3 is the most abundant carbonate at the sediment surface. With increasing depth abundances of high magnesium carbonate decrease and abundances of low magnesium calcite aragonite and dolomite increase. Carbon isotope compositions of bulk carbonates range from δ 13 C = -0.7 to +0.5%. These values are close to equilibrium with dissolved inorganic carbon in lake water ( δ 13 C = -2%) but far from equilibrium with dissolved inorganic carbon in pore water ( δ 13 C = -16.3- -10/0%). Disequilibrium between pore water and carbonates suggests that the carbonates did not recrystallize substantially in the presence of pore water. Therefore the change of carbonate mineral proportions with depth in the sediments is due mainly to temporal changes in the proportions of endogenic, detrital, and biologic carbonates that were deposited on the lake bottom rather than postdepositional carbonate diagenesis.

North Dakota↗
USGS2007

Food habits of rodents inhabiting arid and semi-arid ecosystems of central New Mexico

In this study, we describe seasonal dietary composition for 15 species of rodents collected in all major habitats on the Sevilleta National Wildlife Refuge (Socorro County) in central New Mexico. A comprehensive literature review of food habits for these species from throughout their distribution also is provided. We collected rodents in the field during winter, spring and late summer in 1998 from six communities: riparian cottonwood forest; piñon-juniper woodland; juniper-oak savanna; mesquite savanna; short-grass steppe; and Chihuahuan Desert scrubland. Rodents included Spermophilus spilosoma (Spotted Ground Squirrel), Perognathus flavescens (Plains Pocket Mouse), Perognathus flavus (Silky Pocket Mouse), Dipodomys merriami (Merriam’s Kangaroo Rat), Dipodomys ordii (Ord’s Kangaroo Rat), Dipodomys spectabilis (Banner-tailed Kangaroo Rat), Reithrodontomys megalotis (Western Harvest Mouse), Peromyscus boylii (Brush Mouse), Peromyscus eremicus (Cactus Mouse), Peromyscus leucopus (White-footed Mouse), Peromyscus truei (Piñon Mouse), Onychomys arenicola (Mearn’s Grasshopper Mouse), Onychomys leucogaster (Northern Grasshopper Mouse), Neotoma albigula/leucodon (White-throated Woodrats), and Neotoma micropus (Southern Plains Woodrat). We collected stomach contents of all species, and cheek-pouch contents of heteromyids, and quantified them in the laboratory. We determined seasonal diets in each habitat by calculating mean percentage volumes of seeds, arthropods and green vegetation (plant leaves and stems) for each species of rodent. Seeds consumed by each rodent were identified to genus, and often species, and quantified by frequency counts. Comparisons of diets between and among species of rodents, seasons, and ecosystems were also examined. We provide an appendix of all plant taxa documented.

Special publication of the Museum of Southwestern ↗
USGS2010

Guidelines for calculating and enhancing detection efficiency of PIT tag interrogation systems

With increasing use of passive integrated transponder (PIT) tags and reliance on stationary PIT tag interrogation systems to monitor fish populations, guidelines are offered to inform users how best to use limited funding and human resources to create functional systems that maximize a desired level of detection and precision. The estimators of detection efficiency and their variability as described by Connolly et al. (2008) are explored over a span of likely performance metrics. These estimators were developed to estimate detection efficiency without relying on a known number of fish passing the system. I present graphical displays of the results derived from these estimators to show the potential efficiency and precision to be gained by adding an array or by increasing the number of PIT-tagged fish expected to move past an interrogation system.

PNAMP Special Publication↗
USGS2016

A new species of Myotis (Chiroptera: Vespertilionidae) from Suriname

We describe a new species of bat in the genus Myotis (Vespertilionidae: Myotinae) from the district of Sipaliwini, Suriname. The new species ( Myotis clydejonesi sp. nov.), known from a single specimen, is sister to a clade of M. nigricans (Schinz) from southern South America, but differs from all Neotropical species of Myotis in qualitative and quantitative morphological characters and in its cytochrome- b gene sequence. Our findings also indicate that M. nigricans remains composite and provide support for restricting M. nigricans (sensu stricto) to southern South America.

Raleigh Falls↗