Geology ReportsSearch

SEARCH · Geology Reports

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources

Variability in eddy sandbar dynamics during two decades of controlled flooding of the Colorado River in the Grand Canyon

Sandbars are iconic features of the Colorado River in the Grand Canyon, Arizona, U.S.A. Following completion of Glen Canyon Dam in 1963, sediment deficit conditions caused erosion of eddy sandbars throughout much of the 360 km study reach downstream from the dam. Controlled floods in 1996, 2004, and 2008 demonstrated that sand on the channel bed could be redistributed to higher elevations, and that floods timed to follow tributary sediment inputs would increase suspended sand concentrations during floods. Since 2012, a new management protocol has resulted in four controlled floods timed to follow large inputs of sand from a major tributary. Monitoring of 44 downstream eddy sandbars, initiated in 1990, shows that each controlled flood deposited significant amounts of sand and increased the size of subaerial sandbars. However, the magnitude of sandbar deposition varied from eddy to eddy, even over relatively short distances where main-stem suspended sediment concentrations were similar. Here, we characterize spatial and temporal trends in sandbar volume and site-scale (i.e., individual eddy) sediment storage as a function of flow, channel, and vegetation characteristics that reflect the reach-scale (i.e., kilometer-scale) hydraulic environment. We grouped the long-term monitoring sites based on geomorphic setting and used a principal component analysis (PCA) to correlate differences in sandbar behavior to changes in reach-scale geomorphic metrics. Sites in narrow reaches are less-vegetated, stage changes markedly with discharge, sandbars tend to remain dynamic, and sand storage change dominantly occurs in the eddy compared to the main channel. In wider reaches, where stage-change during floods may be half that of narrow sites, sandbars are more likely to be stabilized by vegetation, and floods tend to aggrade the vegetated sandbar surfaces. In these locations, deposition during controlled floods is more akin to floodplain sedimentation, and the elevation of sandbar surfaces increases with successive floods. Because many sandbars are intermediate to the end members described above, high-elevation bar surfaces stabilized by vegetation often have a more dynamic unvegetated sandbar on the channel-ward margin that aggrades and erodes in response to controlled flood cycles. Ultimately, controlled floods have been effective at increasing averaged sandbar volumes, and, while bar deposition during floods decreases through time where vegetation has stabilized sandbars, future controlled floods are likely to continue to result in deposition in a majority of the river corridor.

Colorado River, Grand Canyon

Stratigraphic and climatic implications of clay mineral changes around the Paleocene/Eocene boundary of the northeastern US margin

Kaolinite usually is present in relatively small amounts in most upper Paleocene and lower Eocene neritic deposits of the northern US Atlantic Coastal Plain. However, there is a short period (less than 200,000 k.y.) in the latest Paleocene (upper part of calcareous nannoplankton Zone NP 9) when kaolinite-dominated clay mineral suites replaced the usual illite/smectite-dominated suites. During this time of global biotic and lithologic changes, kaolinite increased from less than 5% of the clay mineral suite to peak proportions of 50-60% of the suite and then returned to less than 5% in uppermost Paleocene/lowermost Eocene strata. This kaolinite pulse is present at numerous localities from southern Virginia to New Jersey. These sites represent both inner and middle neritic depositional environments and reflect input from several river drainage systems. Thus, it is inferred that kaolinite-rich source areas were widespread in the northeastern US during the latest Paleocene. Erosion of these source areas contributed the kaolinite that was transported and widely dispersed into shelf environments of the Salisbury embayment. The kaolinite increase, which occurred during a time of relatively high sea level, probably is the result of intensified weathering due to increased temperature and precipitation. The southern extent of the kaolinite pulse is uncertain in that uppermost Paleocene beds have not been identified in the southern Atlantic Coastal Plain. The late Paleocene kaolinite pulse that consists of an increase to peak kaolinite levels followed by a decrease can be used for detailed correlation between more upbasin and more downbasin sections in the Salisbury embayment. Correlations show that more upbasin Paleocene/Eocene boundary sections are erosionally truncated. They have varying portions of the kaolinite increase and, if present at all, discontinuous portions of the subsequent kaolinite decrease. As these truncated sections are disconformably overlain by lower Eocene strata, rapid erosional removal of large parts of the most kaolinite-rich P/E boundary clay deposits occurred by early Eocene time. Erosion of the kaolinite-rich P/E boundary beds was enhanced during times of sea-level fall when kaolinite-rich sediments were redeposited to produce kaolinite spikes in basal beds of lower and middle Eocene sequences that have little or no kaolinite elsewhere in the sequence. In contrast, more downbasin sites document only the upper, decreasing part of the kaolinite pulse. The absence of strata documenting the earlier kaolinite increase is attributed to slow sedimentation (condensed interval) as a result of a significant sea level rise that ponded most sediments in shallower waters, combined with the probable subsequent erosional removal of these thin downbasin deposits by oceanic currents.

Sedimentary Geology

Paleoproterozoic basin development and sedimentation in the Lake Superior region, North America

The peneplaned Archean craton in the Lake Superior region was the platform upon which a continental margin assemblage was deposited. Extension resulted in localized rifts that received thicker accumulations of sediments and volcanic rocks than did adjacent parts of the platform. Seas transgressed onto the continent several times and an ocean basin opened south of the present-day Lake Superior. Island arcs that formed during subduction collided with the craton margin as the ocean basin closed; oceanic crust is poorly preserved as a dismembered ophiolite sequence. The arc volcanics are preserved as the Wisconsin magmatic terranes. The collision resulted in a fold-and-thrust belt known as the Penokean orogen. To the north of the fold-and-thrust belt, a northward-migrating foreland basin - the Animikie basin - developed. Thick turbidite successions were deposited along the basin axis, and terrigenous clastics and Lake Superior-type iron-formation were deposited on the shelf along the northern margin of the basin. The primary paleoclimatic indicators are: (1) glaciogenic rocks at the base of the Paleoproterozoic succession in Michigan indicating ice-house conditions; 2) remnants of a paleosol on the glaciogenic rocks indicative of deep weathering, probably under subtropical conditions and therefore of greenhouse conditions; and (3) carbonate minerals after gypsum, halite, and anhydrite in stromatolitic dolomite, indicative of aridity. Three second-order depositional sequences are bounded by major unconformities, and can be correlated throughout the Lake Superior region. ?? 2001 Elsevier Science B.V. All rights reserved.

Sedimentary Geology

The mesoproterozoic midcontinent rift system, Lake Superior region, USA

Exposures in the Lake Superior region, and associated geophysical evidence, show that a 2000 km-long rift system developed within the North American craton ??? 1109-1087 Ma, the age span of the most of the volcanic rocks. This system is characterized by immense volumes of mafic igneous rocks, mostly subaerial plateau basalts, generated in two major pulses largely by a hot mantle plume. A new ocean basin was nearly formed before rifting ceased, perhaps due to the remote effect of the Grenville continental collision to the east. Broad sagging/subsidence, combined with a system of axial half-grabens separated along the length of the rift by accommodation zones, provided conditions for the accumulation of as much as 20 km of volcanic rocks and as much as 10 km of post-rift clastic sediments, both along the rift axis and in basins flanking a central, post-volcanic horst. Pre-rift mature, quartzose sandstones imply little or no uplift prior to the onset of rift volcanism. Early post-rift red-bed sediments consist almost entirely of intrabasinally derived volcanic sediment deposited in alluvial fan to fluvial settings; the exception is one gray to black carbon-bearing lacustrine(?) unit. This early sedimentation phase was followed by broad crustal sagging and deposition of progressively more mature red-bed, fluvial sediments with an extra-basinal provenance. ?? 2001 Elsevier Science B.V. All rights reserved.

Sedimentary Geology

A lone biodetrital mound in the Chesterian (Carboniferous) of Alabama?

A carbonate mound in the Chesterian Bangor Limestone of Lawrence County, Alabama, consists chiefly of packstone and grainstone dominated by echinoderm ossicles and fragments of fenestrate bryozoans. In-situ colonies of the rugose coral Caninia flaccida comprise about 8% of the mound by volume. The exposed portion of the mound is approximately 25 m wide, 1.6 m thick at the thickest point and roughly circular in plan. The mound developed on top of a shallow ooid shoal that had been cemented and stabilised during an earlier episode of sub-aerial exposure. Subsequent flooding of the exposed shoal surface permitted establishment of the mound biota. Lateral and vertical facies relationships suggest that the mound possessed about 45 cm of synoptic relief when fully developed. Rugose corals, fenestrate and ramose bryozoans, stalked echinoderms, and sessile soft-bodied organisms encrusted by foraminifera colonised the shoal, forming a mound. Baffling resulted in deposition of mixed-fossil packstone containing locally derived debris and coated grains from the surrounding sea floor. Strong currents within the mound are indicated by preferred orientation of corals and by coarse, commonly cross-stratified grainstone in channels between neighboring coral colonies. Corals are most abundant on the windward side of the mound, where they account for about 13% of the mound compared to 6- 10% in the central part of the mound, and 2-4% on the leeward flank. Biodetrital mounds such as the one described here are uncommon in upper Paleozoic strata and previously unknown in the Bangor Limestone. Of 10 carbonate buildups we examined in the Bangor in Alabama and Tennessee, only one is a biodetrital mound. Two are rugose coral-microbial reefs, one is a coral biostrome, and six are dominated by microbialite. The Bangor shelf, previously interpreted as sedimentologically simple, appears to contain many small mounds of quite varied characteristics. Also, the discovery of a biodetrital mound in the Chesterian of Alabama suggests that there may be more kinds of upper Paleozoic mounds than commonly acknowledged. ?? 2001 Elsevier Science B.V. All rights reserved.

Sedimentary Geology

Depositional history and neotectonics in Great Salt Lake, Utah, from high-resolution seismic stratigraphy

High-resolution seismic-reflection data from Great Salt Lake show that the basinal sediment sequence is cut by numerous faults with N-S and NE-SW orientations. This faulting shows evidence of varied timing and relative offsets, but includes at least three events totaling about 12 m following the Bonneville phase of the lake (since about 13.5 ka). Several faults displace the uppermost sediments and the lake floor. Bioherm structures are present above some faults, which suggests that the faults served as conduits for sublacustrine discharge of fresh water. A shallow, fault-controlled ridge between Carrington Island and Promontory Point, underlain by a well-cemented pavement, separates the main lake into two basins. The pavement appears to be early Holocene in age and younger sediments lap onto it. Onlap-offlap relationships, reflection truncations, and morphology of the lake floor indicate a low lake, well below the present level, during the early Holocene, during which most of the basin was probably a playa. This low stand is represented by irregular reflections in seismic profiles from the deepest part of the basin. Other prominent reflectors in the profiles are correlated with lithologic changes in sediment cores related to the end of the Bonneville stage of the lake, a thick mirabilite layer in the northern basin, and the Mazama tephra. Reflections below those penetrated by sediment cores document earlier lacustrine cycles. ?? 2002 Elsevier Science B.V. All rights reserved.

Utah

Slope-apron deposition in an Ordovician arc-related setting: The Vuelta de Las Tolas Member (Suri Formation), Famatina Basin, northwest Argentina

The Ordovician Suri Formation is part of the infill of the Famatina Basin of northwest Argentina, which formed in an active setting along the western margin of early Paleozoic Gondwana. The lower part of this formation, the Vuelta de Las Tolas Member, records sedimentation on a slope apron formed in an intra-arc basin situated on a flooded continental arc platform. The coincidence of a thick Arenig-Llanvirn sedimentary succession and volcanic-plutonic arc rocks suggests an extensional or transtensional arc setting, and is consistent with evidence of an extensional regime within the volcanic arc in the northern Puna region. The studied stratigraphic sections consist of volcanic rocks and six sedimentary facies. The facies can be clustered into four facies associations. Association 1, composed of facies A (laminated siltstones and mudstones) and B (massive mudstones and siltstones), is interpreted to have accumulated from silty-muddy high-and low-density turbidity currents and highly fluid, silty debris flows, with subsequent reworking by bottom currents, and to a lesser extent, hemipelagic suspension in an open-slope setting. Facies association 2 is dominated by facies C (current-rippled siltstones) strata. These deposits are interpreted to record overbank sedimentation from fine-grained turbidity currents. Facies E (matrix-supported volcanic breccias) interbedded with andesitic lava units comprises facies association 3. Deposition was contemporaneous with subaqueous volcanic activity, and accumulated from cohesive debris flows in a coarse-grained wedge at the base of slope. Facies association 4 is typified by facies D (vitric fine-grained sandstones and siltstones) and F (channelized and graded volcanic conglomerates and breccias) deposits. These strata commonly display thinning-and fining-upward trends, indicating sedimentation from highly-concentrated volcaniclastic turbidity currents in a channelized system. The general characteristics of these deposits of fresh pyroclastic detritus suggest that their accumulation was contemporaneous with, or post-dated shallow-water or subaereal explosive volcanism. The Vuelta de Las Tolas Member tends to show an overall random facies patterns reflecting the strong influence of non-cyclical episodic processes related to arc volcanism and slope sedimentation. The scarcity of resident ichnofaunas and the presence of thick packages of uniform mudstones suggest deposition under oxygen-depleted conditions in a topographically confined, ponded sub-basin. Interbasinal correlations favor comparison with Middle Arenig slope-apron successions formed in the northern Puna Basin and suggest a southward prolongation of the Arenig volcanic arc.

Famatina Basin, northwest Argentina

Correlation of Miocene sequences and hydrogeologic units, New Jersey Coastal Plain

We have developed a Miocene sequence stratigraphic framework using data from recently drilled boreholes in the New Jersey Coastal Plain. Sequences are shallowing upward, unconformity-bounded units; fine-grained shelf and prodelta sediments grade upward to delta front and shallow-marine sands, corresponding to confining bed-aquifer couplets. By dating Miocene sequences using Sr-isotope stratigraphy, and mapping with borehole data and geophysical logs, we can predict the continuity and effectiveness of the confining beds and aquifers. The following are illustrated on a 90-km basinward dip section: (1) the composite confining bed is comprised of the KwO and lower Kw1a (ca. 23.8-20.5 Ma) sequences downdip at Atlantic City, and the Kw1b, Kw1a and older sequences updip (ca. 69.3-20.6 Ma), and is continuous throughout most of the coastal plain; (2) the major confined aquifer, the Atlantic City 800-foot sand, is comprised of the upper Kw1a and Kw1b sequences (ca. 20.5-20.2 Ma) and is an areally continuous sand that is interconnected with the Kirkwood-Cohansey aquifer system updip of Mays Landing; (3) the confining bed above the Atlantic City 800-foot sand is comprised of the Kw2a, Kw2b, and Kw3 sequences (18.1-13.3 Ma) and is an extensive confining bed that pinches out updip. These sequences and aquifer-confining bed couplets are linked to global sea-level changes evinced by the ??18O record. We conclude that sequence stratigraphy is a powerful tool when applied to regional hydrogeologic problems, although basinal tectonic differences and localized variations in sediment supply can affect aquifer thickness and permeability.

New Jersey

Reinterpretation of the peninsular Florida Oligocene: An integrated stratigraphic approach

A very thick (> 300 m) nearly continuous Oligocene section exists in southern peninsular Florida, as revealed by lithostratigraphic, biostratigraphic (mollusks and dinocysts), chronostratigraphic (Sr isotopes) and petrographic analyses of twelve cores and two quarries. The Oligocene deposits in the subsurface of southern Florida are the thickest documented in the southeastern U.S., and they also may represent the most complete record of Oligocene deposition in this region. No major unconformities within the Oligocene section are detected in the southern portion of the peninsula; hiatuses at the Eocene-Oligocene boundary, the early Oligocene-late Oligocene boundary, and the late Oligocene-Miocene boundary, are of limited duration if they exist at all. No significant disconformity is recognized between the Suwannee Limestone and the Arcadia Formation in southern Florida. However, on the east coast of Florida a hiatus of more than 12 m.y., spanning from at least the middle of the early Oligocene to early Miocene is present. The Suwannee Limestone was deposited during the early Oligocene. The top of the Suwannee Limestone appears to be diachronous across the platform. The 'Suwannee' Limestone, previously identified incorrectly as a late Oligocene unit, is herein documented to be early Oligocene and is encompassed in the lower Oligocene Suwannee Limestone. An unnamed limestone, found on the east coast of the peninsula is, at least in part, correlative with the Suwannee Limestone. The Arcadia Formation, basal Hawthorn Group, accounts for a large portion of the Oligocene deposition in southern Florida, spanning the interval from the middle of the early Oligocene to at least the early Miocene. Comparisons of the depositional patterns, and the distribution of dolomite and phosphate within the Suwannee Limestone and the Arcadia Formation, suggest fluctuating sea levels and that the paleo-Gulf Stream played a role in determining the nature and extent of Oligocene deposition in peninsular Florida.

Florida

Southern Laurentide ice lobes were created by ice streams: Des Moines Lobe in Minnesota, USA

Regional mapping in southern Minnesota has illuminated a suite of landforms developed by the Des Moines Lobe that delimit the position of the lobe at its maximum and at lesser readvances. The ice lobe repeatedly advanced, discharged its subglacial water, and subsequently stagnated. Recent glaciological research on Antarctic ice streams has led some glacial geologists to postulate that ice streams drained parts of the marine-based areas of the Laurentide Ice Sheet. I postulate that such ice streams may develop in land-based areas of an ice sheet as well, and that the Des Moines Lobe, 200 km wide and 900 km long, was an outlet glacier of an ice stream. It appears to have been able to advance beyond the Laurentide Ice Sheet as long as adequate water pressure was maintained. However, the outer part of the lobe stagnated because subglacial water that facilitated the flow was able to drain away through tunnel valleys. Stagnation of the lobe is not equivalent to stoppage of the ice stream, because ice repeatedly advanced into and onto the stagnant margins, stacking ice and debris. Similar landforms are also seen in other lobes of the upper midwestern United States.

Minnesota

Pebble orientation on large, experimental debris-flow deposits

Replicable, pronounced orientation of discoid pebbles (≥8 mm) embedded on surfaces of large (∼10 m 3 ) experimental debris-flow deposits reveals that strongly aligned, imbricate fabric can develop rapidly over short distances in mass flows. Pebble long axes aligned subparallel to deposit margins as well as subparallel to margins of surge waves arrested within the deposits. Pebble alignment exhibited modes both parallel to ( a(p) ), the primary flow direction; intermediate axes dipped preferentially inward from surge-wave margins ( b(i) orientation). Repetitive development of margin-parallel, imbricate fabric distributed across deposit surfaces provides compelling evidence that deposits formed dominantly through progressive incremental accretion rather than through simple en masse emplacement. Pronounced fabric along deposit and arrested surge-wave margins reflects significant grain interaction along flow margins. This sedimentological evidence for significant marginal grain interaction complements theoretical analyses (Iverson, 1997) and other experimental data (Major, 1996; Iverson, 1997) that indicate that resistance along flow margins is an important factor affecting debris-flow deposition. The fabric on the experimental deposits demonstrates that debris flows can develop strongly imbricate particle orientation that mimics fabric developed during fluvial deposition. Particle shape and local stress fields appear to have more control over fabric development than does general depositional process. Other criteria in addition to particle orientation are needed to discriminate mass flow from fluvial gravel deposits and to unravel depositional history.

Sedimentary Geology

Chemical reaction path modeling of ore deposition in Mississippi Valley-type Pb-Zn deposits of the Ozark region, US midcontinent

The Ozark region of the U.S. midcontinent is host to a number of Mississippi Valley-type districts, including the world-class Viburnum Trend, Old Lead Belt, and Tri-State districts and the smaller Southeast Missouri barite, Northern Arkansas, and Central Missouri districts. There is increasing evidence that the Ozark Mississippi Valley-type districts formed locally within a large, interconnected hydrothermal system that also produced broad fringing areas of trace mineralization, extensive subtle hydrothermal alteration, broad thermal anomalies, and regional deposition of hydrothermal dolomite cement. The fluid drive was provided by gravity flow accompanying uplift of foreland thrust belts during the Late Pennsylvanian to Early Permian Ouaehita orogeny.In this study, we use chemical speciation and reaction path calculations, based on quantitative chemical analyses of fluid inclusions, to constrain likely hydrothermal brine compositions and to determine which precipitation mechanisms are consistent with the hydrothermal mineral assemblages observed regionally and locally within each Mississippi Valley-type district in the Ozark region. Deposition of the regional hydrothermal dolomite cement with trace sulfides likely occurred in response to near-isothermal effervescence of CO 2 from basinal brines as they migrated to shallower crustal levels and lower confining pressures. In contrast, our calculations indicate that no one depositional process can reproduce the mineral assemblages and proportions of minerals observed in each Ozark ore district; rather, individual districts require specific depositional mechanisms that reflect the local host-rock composition, structural setting, and hydrology.Both the Northern Arkansas and Tri-State districts are localized by normal faults that likely allowed brines to rise from deeper Cambrian-Ordovician dolostone aquifers into shallower carbonate sequences dominated by limestones. In the Northern Arkansas district, jasperoid preferentially replaced limestones in the mixed dolostone-limestone sedimentary packages. Modeling results indicate that the ore and alteration assemblages in the Tri-State and Northern Arkansas districts resulted from the flow of initially dolomite-saturated brines into cooler limestones. Adjacent to fluid conduits where water/rock ratios were the highest, the limestone was replaced by dolomite. As the fluids moved outward into cooler limestone, jasperoid and sulfide replaced limestone. Isothermal boiling of the ore fluids may have produced open-space filling of hydrothermal dolomite with minor sulfides in breccia and fault zones. Local mixing of the regional brine with locally derived sulfur undoubtedly played a role in the development of sulfide-rich ore runs.Sulfide ores of the Central Missouri district are largely open-space filling of sphalerite plus minor galena in dolostone karst features localized along a broad anticline. Hydrothermal solution collapse during ore deposition was a minor process, indicating dolomite was slightly undersaturated during ore deposition. No silicification and only minor hydrothermal dolomite is present in the ore deposits. The reaction path that best explains the features of the Central Missouri sulfide deposits is the near-isothermal mixing of two dolomite-saturated fluids with different H 2 S and metal contents. Paleokarst features may have allowed the regional brine to rise stratigraphically and mix with locally derived, H 2 S-rich fluids. The Viburnum Trend and Old Lead Belt ores are galena rich with lesser amounts of sphalerite; they replace the most permeable dolostone facies in the Bonneterre Dolomite. Hydrothermal dissolution of host dolostone was concurrent with sulfide deposition, but dolomite deposition occurred episodically between periods of sulfide deposition. The important ore controls in these districts are a variety of sedimentary and geologic features that allowed cross-stratigraphic fluid flow and provided opportunities for fluid mixing. The reaction path which best reproduces the broad features of the Viburnum Trend and Old Lead Belt ores is one in which a dolomite-saturated, lead-rich, zinc- and H 2 S-poor brine mixes with a less saline, H 2 S-rich fluid. The brine became enriched in K, Mg, and Pb and depleted in H 2 S as it flowed through sandstone and redbed aquifers prior to entering the district. This mixing model is consistent with the abundant fluid inclusion and stable isotope evidence for fluid mixing in the districts. Small amounts of cooling associated with the mixing may have contributed to sulfide deposition.

Alabama, Arkansas, Illinois, Indiana, Kansas, Kent

Groundwater availability of the Williston Basin, United States and Canada

Executive Summary The Williston Basin of the Northern Great Plains is a sedimentary basin—a geologic bowl-like structure filled with layered sedimentary rocks dating as far back as the Paleozoic age. The basin, which is nationally important for the production of energy resources, spans Montana, North Dakota, and South Dakota in the United States, and Manitoba and Saskatchewan in Canada. The three uppermost principal aquifer systems are the glacial, lower Tertiary, and Upper Cretaceous aquifer systems. As deep as 3,000 feet (ft) at the center of the basin, these are the most accessible aquifer systems in the basin and are the primary sources of potable groundwater in much of this area. The glacial aquifer system consists of Quaternary-age unconsolidated till, silt, clay, outwash sand and gravel, and occasional cobbles and boulders. The lower Tertiary and Upper Cretaceous aquifer systems consist primarily of sandstone, siltstone, mudstone, shale, and coal. As energy demands have increased in the basin, horizontal drilling and hydraulic-fracturing have been used (especially since 2005) to develop previously inaccessible formations—namely, the Bakken and Three Forks Formations. The basin has yielded a large supply of domestic oil and natural gas since the 1950s, but the technologies required to extract those materials use large amounts of freshwater. The increasing freshwater demands of energy production in the Williston Basin, in addition to population growth, have led to a need for new tools to assess groundwater resources.

Williston Basin

Geologic Criteria for the Assessment of Sedimentary Exhalative (Sedex) Zn-Pb-Ag Deposits

Sedex deposits account for more than 50 percent of the world's zinc and lead reserves and furnish more than 25 percent of the world's production of these two metals. This report draws on previous syntheses as well as on topical studies of deposits in sedex basins to determine the characteristics and processes that produced sedex deposits. This analysis also uses studies of the tectonic, sedimentary, and fluid evolution of modern and ancient sedimentary basins and mass balance constraints to identify the hydrothermal processes that are required to produce sedex deposits. This report demonstrates how a genetic model can be translated into geologic criteria that can be used in the U.S. Geological Survey National Assessments for sedex zinc-lead-silver deposits to define permissive tracts, assess the relative prospectivity of permissive tracts, and map favorability within permissive tracts.

Open-File Report

Geology and geochemistry of three sedimentary-rock-hosted disseminated gold deposits in Guizhou Province, People's Republic of China

Five sedimentary-rock-hosted disseminated gold deposits have been discovered since 1980 in southwestern Guizhou Province (PRC). Submicron-sized gold is disseminated in silty carbonate and carbonaceous shale host rocks of Permian and Triassic age. Arsenic, antimony, mercury, and thallium accompany the gold. Associated hydrothermal alteration resulted in decarbonatization of limestone, silicification, and argillization, and depletion of base metals, barium, and many other elements. Organic material occurs in most host rocks and ores. It was apparently devolatilized during a regional heating event that preceded hydrothermal activity, and thus was not mobilized during mineralization, and did not affect gold deposition. The geologic setting of the Guizhou deposits includes many features that are similar to those of sedimentary-rock-hosted deposits of the Great Basin, western United States. The heavy-element suite that accompanies gold is the same, but base metals are even scarcer in the Guizhou deposits than they are in U.S. deposits. The Guizhou deposits discovered to date are smaller than most U.S. deposits and have no known spatially associated igneous rocks.

Guizhou Province

Aeromagnetic anomalies over faulted strata

High-resolution aeromagnetic surveys are now an industry standard and they commonly detect anomalies that are attributed to faults within sedimentary basins. However, detailed studies identifying geologic sources of magnetic anomalies in sedimentary environments are rare in the literature. Opportunities to study these sources have come from well-exposed sedimentary basins of the Rio Grande rift in New Mexico and Colorado. High-resolution aeromagnetic data from these areas reveal numerous, curvilinear, low-amplitude (2–15 nT at 100-m terrain clearance) anomalies that consistently correspond to intrasedimentary normal faults (Figure 1). Detailed geophysical and rock-property studies provide evidence for the magnetic sources at several exposures of these faults in the central Rio Grande rift (summarized in Grauch and Hudson, 2007, and Hudson et al., 2008). A key result is that the aeromagnetic anomalies arise from the juxtaposition of magnetically differing strata at the faults as opposed to chemical processes acting at the fault zone. The studies also provide (1) guidelines for understanding and estimating the geophysical parameters controlling aeromagnetic anomalies at faulted strata (Grauch and Hudson), and (2) observations on key geologic factors that are favorable for developing similar sedimentary sources of aeromagnetic anomalies elsewhere (Hudson et al.). High-resolution aeromagnetic surveys are now an industry standard and they commonly detect anomalies that are attributed to faults within sedimentary basins. However, detailed studies identifying geologic sources of magnetic anomalies in sedimentary environments are rare in the literature. Opportunities to study these sources have come from well-exposed sedimentary basins of the Rio Grande rift in New Mexico and Colorado. High-resolution aeromagnetic data from these areas reveal numerous, curvilinear, low-amplitude (2–15 nT at 100-m terrain clearance) anomalies that consistently correspond to intrasedimentary normal faults (Figure 1). Detailed geophysical and rock-property studies provide evidence for the magnetic sources at several exposures of these faults in the central Rio Grande rift (summarized in Grauch and Hudson, 2007, and Hudson et al., 2008). A key result is that the aeromagnetic anomalies arise from the juxtaposition of magnetically differing strata at the faults as opposed to chemical processes acting at the fault zone. The studies also provide (1) guidelines for understanding and estimating the geophysical parameters controlling aeromagnetic anomalies at faulted strata (Grauch and Hudson), and (2) observations on key geologic factors that are favorable for developing similar sedimentary sources of aeromagnetic anomalies elsewhere (Hudson et al.).

The Leading Edge