Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Reliability Engineering and System Safety (RESS)”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,693 records · Page 7Linked to original sources
USGS2026

Sackung at Bald Eagle ridge, central Colorado: An updated interpretation of ridge-spreading movement, structures, and mechanisms from 50 years (1975–2025) of U.S. Geological Survey research

Slow gravitational failures of mountain peaks and ridges are poorly understood. Herein, we report on 50 years of studies at a slowly spreading castellate ridge in the Sawatch Range in central Colorado. The orientations of geomorphic-structural features indicate that the fractured Precambrian granitic rock underlying the ridge has extended and spread northwestward toward the formerly glacier-covered Busk Creek valley. Results from surveying, field-based geomorphic-structural mapping using lidar, rock mass quality measurements, a passive seismic survey, and satellite radar provide a major update to research started by U.S. Geological Survey researchers in the 1970s and 1980s. New insights include a recognition that the entire ridge has slowly moved by concurrent sliding along an inferred northwest dipping, compound basal-slip surface (or zone), and through the formation of multiple grabens by normal faulting and flexural toppling along sets of pre-existing fractures that dip moderately (∼45°) to the southeast. We were unable to distinguish the presence of a sudden and strong contrast in seismic velocity across the inferred slip surface. Movement during the 50-year study period has been episodic and gradually decreasing, in correspondence with decreasing cumulative annual precipitation and increasing mean annual air temperatures. The fastest moving area, just upslope from the glacier trimline, had an average horizontal velocity of 3 – 4 mm/yr. Evidence suggests that movement started as a paraglacial response mechanism, but because of the site’s proximity to the Rio Grande Rift, we cannot exclude earthquake shaking as a mechanism for initiation or enhancement of slope movement. An estimate of longer-term horizontal movement from the exposed basal-slip surface at the uphill side of the ridgetop graben is ∼1.1 mm/yr for the 13 – 14 ky post-glacial period. Broad implications of our work are that: (1) long-term measurements (decades or longer) of slope movement can add insights into how sackungen form and evolve through time; (2) the identification of thrust faults and toes in zones of compression near valley bottoms can be crucial for interpreting sackung failure mechanisms, and (3) the use of passive-seismic techniques to identify the depth to a slip surface may not be successful in granitic terrain dominated by planar fractures and subtle changes in rock-mass characteristics.

Colorado↗
USGS2025

Synergy between geology and geophysics in graphite mineral resource assessment

Graphite is designated as a critical mineral by the U.S. Government due to its essential role in modern technology and its vulnerability to supply chain disruption. To evaluate domestic graphite resources, the U.S. Geological Survey (USGS) conducted two airborne electromagnetic (AEM) surveys as part of the Earth Mapping Resources Initiative (Earth MRI) over prospective areas in the southern Appalachians of Alabama and the Seward Peninsula of Alaska. These surveys aimed to refine areas of interest by revealing subsurface electrical resistivity patterns indicative of graphite-bearing rocks. The results of the AEM surveys were integrated with existing geological knowledge and supplemented by field observations to assess the likelihood of undiscovered resources in these regions. This multidisciplinary approach combined geophysical techniques with traditional geological methods, enhancing the understanding of graphite potential in areas that may have been previously overlooked. The findings from this initiative are expected to contribute significantly to the ongoing efforts to secure a reliable domestic supply of graphite, thereby reducing import reliance and supporting national interests in mineral resource management.

Conference Paper↗
USGS2024

Complex landslide patterns explained by local intra-unit variability of stratigraphy and structure: Case study in the Tyee Formation, Oregon, USA

Lithology and geologic structure are important controls on landslide susceptibility and are incorporated into many regional landslide hazard models. Typically, metrics for mapped geologic units are used as model input variables and a single set of values for material strength are assumed, regardless of spatial heterogeneities that may exist within a map unit. Here we describe how differences in bedding thickness, grain size, inferred uniaxial compressive strength, and bedding dip control the inherent susceptibility of slopes to deep-seated failure within a single mapped geologic unit - the Tyee Formation of Oregon, USA. The Tyee, which covers over 15,000 km2 and underlies much of the Oregon Coast Range, comprises gently folded alternating beds of sandstone and siltstone deposited as turbidites, forming a 2-km thick Eocene submarine fan which has been uplifted and exhumed through the Cenozoic. Deep-seated landslides are widespread in the Tyee, but form a complex spatial pattern such that landslide density ranges from 0 to 24% of the total landscape area. These slides are often extensive and sufficiently deep to reduce local hillslope gradients, resulting in a strong negative correlation between landslide density and mean local slope. Mean annual precipitation and predicted strong ground motions from Cascadia earthquake scenarios also fail to explain the spatial distribution of deep-seated landslides. Consequently, landslide stability models, which are strongly influenced by landscape slope, pore-water pressure, and seismic acceleration, yield landslide susceptibility maps which are broadly anti-correlated with mapped deep-seated landslide density. Through a multivariable linear regression model, we show that much of the variance in deep-seated landslide density can be explained by variability of intra-unit stratigraphic and structural characteristics, which we measure at 128 sites across two study areas totaling ∼3000 km2. Our results suggest bedding dip is only weakly correlated to landslide density, but strongly influences landslide failure style. Subtle increases in bedding dip, even in the gently folded Tyee Formation, result in a substantially higher likelihood of a landslide being cataclinal, or parallel to bedding. Overall, we find a slight majority of landslides fail within these cataclinal slopes, and that these landslides tend to be larger than non-cataclinal landslides. We also show that the lithological and structural properties that influence landslide susceptibility are distinct for these two populations of landslides. Our results demonstrate how localized, intra-unit, geologic variability can exert strong control on landslide susceptibility and failure style. This suggests that in some locations, landslide hazard models could be significantly improved by incorporating detailed, spatially variable, geologic properties rather than relying solely on generalized geologic map units.

Oregon↗
USGS2024

A journey to the center of the USGS National Strong-motion Project processing and beyond

The United States Geological Survey (USGS) National Strong Motion Project (NSMP) has the primary U.S. government responsibility to acquire, process, and disseminate significant strong-motion earthquake ground motion records measured at surficial free-field stations, structures (buildings, dams, and bridges, and geotechnical arrays to the earthquake engineering community. As a result of the deployment of modern seismic instrumentation and growth of tools such as web-services, earthquake data from U.S. and international seismic networks are more accessible than ever. Our mission is to provide raw and processed strong-motion waveforms with PGA values greater than 0.1%g for M3.0 earthquakes and larger in California and M4.0 and larger within the conterminous US, Hawaii, Puerto Rico, and Alaska. Datasets of interest to the engineering and geophysics communities, such as event sequences in areas of induced seismicity and significant global events, are also processed and posted at the Center for Engineering Strong Motion Data (CESMD) at strongmotioncenter.org when available through collaboration with the international strong-motion data community. Here we outline (1) the NSMP’s current workflow to acquire, process, and distribute data at CESMD; (2) our new endeavours and collaborations focusing on comparison and integration of waveform processing software, development of techniques for metadata quality checks before and after earthquakes, and construction of a dynamic site characterization repository; and (3) our topics for possible collaboration topics across the global strong-motion community.

Conference Paper↗
USGS2026

Teach me how to pycap: A high-capacity well decision support tool using analytical solutions in Python

Regulatory agencies in humid temperate environments rely on timely evaluations of streamflow depletion and drawdown to protect aquatic ecosystems and existing water users. Numerical models offer detailed insights, but their complexity and time demands often preclude their practical use in rapid decision-making. We present pycap-dss, an open-source Python package that implements a suite of analytical solutions for estimating streamflow depletion and drawdown. The tool supports superposition of multiple wells and time-varying pumping, enabling cumulative impact assessments in situations with multiple wells and streams. The software is modular and extensible, allowing users to interchange solutions or add new analytical methods. A YAML-based configuration supports batch processing of multiple wells, and an optional AnalysisProject class facilitates integration with regulatory workflows. Rigorous unit and regression testing ensures computational reliability, and continuous integration supports ongoing development. We demonstrate deterministic examples of drawdown where multiple solutions are readily compared and streamflow depletion with multiple wells in the Central Sands region of Wisconsin. We also show the value of Monte Carlo analyses of streamflow depletion in the same Central Sands example, leveraging computational efficiency to evaluate the uncertainty of individual and cumulative streamflow depletion calculations from over 200 high-capacity wells.

Wisconsin↗
USGS2026

Precipitation-based flood-inundation maps for the East Fork Little Blue River and tributaries at Lee’s Summit, Missouri, 2024

The U.S. Geological Survey, in cooperation with the City of Lee’s Summit, Missouri, assessed flooding of the East Fork Little Blue River and tributaries for varying precipitation magnitudes and durations, varying antecedent runoff conditions, and projected climate-change conditions. The precipitation scenarios were used to develop a library of flood-inundation maps for a 2.95-mile reach of the East Fork Little Blue River and tributaries within the city. A two-dimensional U.S. Army Corps of Engineers Hydrologic Engineering Center–River Analysis System (HEC–RAS; ver. 6.5) rain-on-grid model was calibrated to selected runoff events representing a range of antecedent runoff conditions and hydrologic responses. Lowest adjacent grades for structures within the nearby study area were incorporated into the terrain, and depth grids and water-surface elevation grids were developed for the study area. Simulated velocities at selected bridge locations were also developed from the model. The model was calibrated using water-surface elevation data collected from water-level loggers (pressure transducers) and streamflow measurements and water-surface elevation measurements made at a reference point during runoff events. The calibrated HEC–RAS model was used to simulate streamflows from design rainfall events of 15-minute to 24-hour durations and ranging from a 100- to 0.1-percent annual exceedance probability (1-year to 1,000-year recurrence intervals). Flood-inundation maps were produced for depths at a reference location of 3 to 16 feet, or a depth exceeding the 0.1-percent annual exceedance probability interval precipitation. The results of each precipitation duration-frequency value were represented by a 1-foot-increment inundation map based on the generated peak streamflow from that rainfall event and the corresponding water-surface elevation at the East Fork Little Blue River reference location. Within the HEC–RAS model, 240 scenarios were developed from the design rainfall events with each of 3 antecedent conditions. Additional scenarios were created to simulate the effects of projected precipitation scenarios on the 100-year recurrence interval, 24-hour storm and the 100-year recurrence interval, 6-hour storm. All simulation results were assigned to a flood-inundation map condition based on the generated peak flow and corresponding water-surface elevation at the East Fork Little Blue River reference location. The flood-inundation maps are shown on a web mapping application made available to the public through the City of Lee’s Summit (hyperlink will be added when available). The flood-inundation maps are tied to real-time precipitation data obtained from the Automated Surface Observing System weather station at the Lee’s Summit Municipal Airport, accessible at https://mesonet.agron.iastate.edu/request/download.phtml?network=MO_ASOS . The availability of these maps, along with information regarding observed rainfall, could help provide emergency management personnel and residents with information that is critical for flood-response activities, such as evacuations and road closures, and for postflood recovery efforts.

Missouri↗
USGS2025

Detection of viral, bacterial, and protozoan pathogens and microbial source tracking markers in paired large- and small-volume water samples

When sampling for waterborne microbes, researchers may need to diverge from recommended sample volumes due to logistical constraints, novel targets, or challenging matrices, with little guidance about the potential impact on results. In field studies, we measured bacteria, viruses, and protozoa (15 quantitative polymerase chain reaction assays) in paired large- and small-volume samples to evaluate method performance and relevant factors. Concordance between methods was low. Large-volume ultrafiltration yielded more detections than small-volume sampling, especially for pathogens in groundwater. Greater microbial concentrations were associated with more frequent detections in small-volume samples and greater concordance between paired samples. Large-volume samples appeared to be more susceptible to diminished sensitivity from complex sample matrices. In laboratory studies, recovery of microbes was poorer for large- than small-volume methods, although large-volume methods more reliably detected low-concentration targets. Large-volume samples were less stable than small-volume samples during storage. Overall, large-volume sampling was superior for detecting pathogens but may underestimate concentrations; small-volume sampling was more prone to false negatives but was adequate when concentrations were relatively high, like we observed for microbial source tracking in surface waters.

Wisconsin↗
USGS2025

Tapwater exposures, residential risk, and mitigation in a PFAS-impacted-groundwater community

Tapwater (TW) safety and sustainability are priorities in the United States. Per/polyfluoroalkyl substance(s) (PFAS) contamination is a growing public-health concern due to prolific use, widespread TW exposures, and mounting human-health concerns. Historically-rural, actively-urbanizing communities that rely on surficial-aquifer private wells incur elevated risks of unrecognized TW exposures, including PFAS, due to limited private-well monitoring and contaminant-source proliferation in urbanizing landscapes. Here, a broad-analytical-scope TW-assessment was conducted in a hydrologically-vulnerable, Mississippi River alluvial-island community, where PFAS contamination of the shallow-alluvial drinking-water aquifer has been documented, but more comprehensive contaminant characterization to inform decision-making is currently lacking. In 2021, we analyzed 510 organics, 34 inorganics, and 3 microbial groups in 11 residential and community locations to assess (1) TW risks beyond recognized PFAS issues, (2) day-to-day and year-to-year risk variability, and (3) suitability of the underlying sandstone aquifer as an alternative source to mitigate TW-PFAS exposures. Seventy-six organics and 25 inorganics were detected. Potential human-health risks of detected TW exposures were explored based on cumulative benchmark-based toxicity quotients ( ∑ TQ ). Elevated risks ( ∑ TQ ≥ 1) from organic and inorganic contaminants were observed in all alluvial-aquifer-sourced synoptic samples but not in sandstone-aquifer-sourced samples. Repeated sampling at 3 sites over 52–55 h indicated limited variability in risk over the short-term. Comparable PFAS-specific ∑ TQ for spatial-synoptic, short-term (3 days) temporal, and long-term (3 years quarterly) temporal samples indicated that synoptic results provided useful insight into the risks of TW-PFAS exposures at French Island over the long-term. No PFAS detections in sandstone-aquifer-sourced samples over a 3 year period indicated no PFAS-associated risk and supported the sandstone aquifer as an alternative drinking-water source to mitigate community TW-PFAS exposures. This study illustrated the importance of expanded contaminant monitoring of private-well TW, beyond known concerns (in this case, PFAS), to reduce the risks of a range of unrecognized contaminant exposures.

Wisconsin↗
USGS2022

New Hampshire and Landsat

At its widest point, a mere 80 miles separate the eastern and western borders of New Hampshire. Its northern and southern borders are just 175 miles apart. Even so, few States can boast as much rugged natural beauty per mile as the Nation’s fifth smallest. Nestled within New Hampshire are 93 State parks teeming with moose, Ursus americanus (Pallas, 1780; black bears), coyotes, beavers, river otters, and foxes. The largest section of White Mountain National Forest cuts across north-central New Hampshire, drawing visitors to its lakes, streams, mountain peaks, and hardwood forests. New Hampshire also is home to Lake Winnipesaukee, the State’s largest lake, notable for its floating post offices, the annual “ice-out” contest that sees residents vying to guess the date its surface ice dissipates, and its supporting role in films such as “On Golden Pond” and “What About Bob?” However, the scenic forests of New Hampshire face challenges in the form of invasive species such as Lymantria dispar (Linnaeus, 1758; spongy moth), Adelges piceae (balsam woolly adelgid), and Agrilus planipennis (emerald ash borer). In recent years, New Hampshire’s lakes and streams have seen more cyanobacterial blooms as well. The U.S. Geological Survey Landsat Program offers a consistent, reliable, and historically unmatched source of Earth observations that can aid in the mapping, monitoring, and management of New Hampshire’s land and water resources. Here are a few ways Landsat data have been used in the Granite State.

New Hampshire↗
USGS2026

Evaluation of submersible pressure transducers for streamflow monitoring in small streams

Compact streamgages requiring minimal infrastructure and equipped with submersible pressure transducers (PTs) are increasingly used to monitor small streams, yet disparate implementations obscure their accuracy under real-world conditions. This study isolated instrumentation-derived uncertainty in stage monitoring by co-locating various combinations of commercial vented and unvented PTs with seven U.S. Geological Survey (USGS) reference streamgages on small streams. Multi-year PT stage records from compact streamgages, collected and corrected following USGS protocols, were compared to concurrent reference observations. Vented PTs demonstrated an average measurement uncertainty of ±0.005 m and mean absolute percent error (MAPE) of ±0.2%. Unvented PTs exhibited higher uncertainty, averaging ±0.009 m and ±0.4% MAPE. Although both sensor types had stage errors up to ±0.3 m, 95% of vented PT and unvented PT observations were within 0.01 and 0.02 m of reference stage, respectively. Analysis of additional unvented PTs revealed stage errors of up to ±1.2% when using barometric sensors within 15 km of the in-water sensor. Propagation of stage error to discharge using reference rating models resulted in cumulative discharge MAPEs of ±4.5% for vented and ±5.5% for unvented PTs. These findings highlight PTs as practical alternatives to reference instrumentation when deployed with standardized procedures, potentially expanding access to reliable streamflow data.

conterminous United States↗
USGS2025

Speleothem evidence for Late Miocene extreme Arctic amplification – An analogue for near-future anthropogenic climate change?

The Miocene provides an excellent climatic analogue for near-future runaway anthropogenic warming, with atmospheric CO 2 concentrations and global average temperatures similar to those projected for the coming century under extreme-emissions scenarios. However, the magnitude of Miocene Arctic warming remains unclear due to the scarcity of reliable proxy data. Here we use stable oxygen isotope and trace element analyses, alongside clumped isotope and fluid inclusion palaeothermometry of speleothems to reconstruct palaeo-environmental conditions near the Siberian Arctic coast during the Tortonian (8.68 ± 0.09 Ma ). Stable oxygen isotope records suggest warmer-than-present temperatures. This is supported by temperature estimates based on clumped isotopes and fluid inclusions giving mean annual air temperatures between + 6.6 and + 11.1 °C , compared with − 12.3 °C today. Trace elements records reveal a highly seasonal hydrological environment. Our estimate of > 18 °C of Arctic warming supports the wider consensus of a warmer-than-present Miocene and provides a rare palaeo-analogue for future Arctic amplification under high-emissions scenarios. The reconstructed increase in mean surface temperature far exceeds temperatures projected in fully coupled global climate models, even under extreme-emissions scenarios. Given that climate models have consistently underestimated the extent of recent Arctic amplification, our proxy data suggest Arctic warming may exceed current projections.

Lena River delta↗
USGS2024

The 3D National Topography Model Call for Action—Part 1. The 3D Hydrography Program

The U.S. Geological Survey is initiating the 3D Hydrography Program (3DHP), the first systematic remapping of the Nation’s surface waters since the original 1:24,000-scale topographic mapping program was active from 1947 to 1992. Building on decades of experience maintaining the National Hydrography Dataset (NHD), the Watershed Boundary Dataset (WBD), and the NHDPlus High Resolution (NHDPlus HR), the 3DHP will completely refresh the Nation’s hydrography data and improve discovery and sharing of water-related data. The design of the 3DHP is based on the results of a study that estimated that the fully implemented program would have the potential to provide more than $1 billion in benefits to Federal, State, Tribal, Territorial, and local governments and to private and nonprofit organizations every year, in addition to myriad societal benefits. The 3DHP would directly support better decision making regarding water resources by providing more accurate, complete, and integrated information than is currently available. The 3DHP datasets will include a three-dimensional (3D) hydrography network generated from and integrated with elevation data from the 3D Elevation Program (3DEP) to better represent stream gradients and channel conditions, along with waterbodies, hydrologic units, hydrologically enhanced elevation and other surfaces, and more consistent and accurate attributes. The 3DHP datasets will inherit key attributes of the NHD, WBD, and NHDPlus HR, and they also will include new attributes and links to other data such as the U.S. Fish and Wildlife Service National Wetlands Inventory, groundwater data, and engineered hydrologic systems such as stormwater networks. The 3DHP will be designed to provide a set of open and interoperable web-based tools, maps, and data catalogs, creating a robust system for users to reference their information about water; the system elements are collectively referred to as the “infostructure.” The 3DHP and the infostructure can provide a foundational geospatial underpinning for the Internet of Water, a community-based effort to modernize tools and technologies to share water data. As proposed, the 3DHP would begin providing products and services to the public in 2024.

Circular↗
USGS2025

Lunar grid systems, coordinate systems, and map projections for the Artemis missions and lunar surface navigation

Foreward This document contains design specifications of a navigational standard for the Moon, including a Lunar Transverse Mercator system, a Lunar Polar Stereographic system, a Lunar Grid Reference System, and a unique coordinate structure, Artemis Condensed Coordinates, for Artemis mission navigation and lunar surface science. The National Aeronautics and Space Administration (NASA) Artemis campaign seeks to place humans on the Moon for the first time since the Apollo missions. Early Artemis missions are heavily focused on the lunar south pole, which promises to return valuable data on the Moon’s geologic record, amongst other mission objectives. Coordinate systems in use today for the lunar south pole provides crew members on the surface neither an efficient nor intuitive means to communicate their position and orientation. A novel grid coordinate system, the Lunar Grid Reference System, is proposed to address these concerns for use in real-time extravehicular activity operations on the lunar surface. The many stakeholders involved in the Artemis missions will need a common system to communicate position and orientation while astronauts are operating on the lunar surface. To that end, Artemis crew members will need that system to be efficient and intuitive to promote efficient extravehicular activity timelines and reduce confusion. In the context of this document, these characteristics are addressed on the design of lunar coordinate systems: Efficient.—The number of characters required to communicate a location within a desired precision level in both local and global contexts, and how many steps are required for a recipient or sender to interpret a location. Intuitive.—How well the system aligns with human perceptual abilities, and whether the system yields distances that have the same relationship to actual lunar surface distance in all directions from the point where a person is located. Technological systems are currently being investigated to supplement the crew members’ ability to locate and orient themselves and other assets on the lunar surface; however, it is unlikely that those systems will be fully operational for the first few landed missions. Even with future positional aids, crew members will still need an efficient and intuitive means to communicate position and orientation. In addition, if technological systems fail, the crews will require land navigation skills and have maps available, thus providing further motivation for a crew-centric coordinate system. The contents of this U.S. Geological Survey (USGS) document detail a comprehensive framework for standardizing lunar crewed surface navigation within NASA and outlines the protocols, methods, and designs necessary for achieving consistency and interoperability across relevant space mission teams and lunar surface navigators. Key components of this document include designs of map projections, projected coordinate reference systems (Lunar Transverse Mercator and Lunar Polar Stereographic systems), and a grid system (Lunar Grid Reference System and Artemis Condensed Coordinates) for the Moon. The work proposed in this document seeks to accomplish something similar to the National Geospatial-Intelligence Agency (NGA) document SIG 0012 (NGA, 2014a), but for using grid systems for the Moon. This report incorporates initial feedback and input from NASA’s Artemis Geospatial Data Team, NASA’s Flight Operations Directorate, National Geodetic Survey, USGS Astrogeology Science Center, and NGA and is intended to serve as a resource for all involved with the Artemis missions, as well as for engineers designing and operating lunar infrastructure.

Techniques and Methods↗
USGS2026

Assessing future hydrologic extremes using an integrated hydrology and river operations model in the Russian River watershed

Study region The Russian River watershed, situated in coastal, northern California, experiences hydrologic extremes, including periodic droughts and flooding. Water managers are working to maintain sustainable water supplies and environmental flows, while mitigating flood risks. Study focus This paper introduces an integrated hydrology and river operations model for the Russian River watershed. This model is distinct from models in previous studies because it represents surface-groundwater interactions and uses climate forcings to estimate dynamic water use demands that are superimposed onto both reservoir operations and water supply constraints. The model was used to examine three historical (1990–2015) and eight future (2016–2099) water use and climate change scenarios. New hydrological insights for the region The direct connection between streams and aquifers facilitated both annual aquifer replenishment by high winter streamflows and streamflow depletion by groundwater wells (19 % of pumped groundwater in alluvial aquifers from stream leakage) during critical low flow periods. Simulated streamflow changes included 59 % longer and 54 % more severe streamflow droughts, 26 % lower seasonal low streamflows, and up to 125 % higher peak streamflows, averaged over future climate and water use scenarios, suggesting increased future flood and water availability risks. Results showed the importance of reservoir operations for mitigating the impacts of increased hydroclimatic volatility, despite a decrease in reservoir reliability at Lake Mendocino, suggesting that reservoir management may be used to decrease future risks.

California↗
USGS2026

The digital archivist: Automating legacy macroseismic data processing using large language models

Macroseismic data are a key resource to investigate shaking and damage from preinstrumental and early instrumental eras. However, data are often stored as inconsistently formatted reports describing observed shaking and damage, making manually parsing and interpreting accounts labor‐intensive. We introduce a novel workflow using Google’s Gemini 2.5 Pro large language model (LLM) to automate the extraction and structuring of macroseismic observations from summary reports. We apply this workflow to the 22 March 1957 M 5.3 Daly City, California, earthquake as a case study. We used Gemini to extract addresses, originally assigned modified Mercalli intensity values, and descriptions from each report. To address coordinate precision limits, addresses were geocoded via Google’s Geocoding application programming interface. This workflow yielded over 2300 geocoded intensity reports for the Daly City earthquake. We use the geocoded accounts, with the original report intensity assignments, to develop a shaking intensity map that in some respects rivals modern Did You Feel It? Maps. We also extract and present data for the 9 February 1971 M L 6.7 Sylmar, California, earthquake. Our results demonstrate the potential of LLMs for reliably extracting and analyzing large, unstructured macroseismic datasets. LLMs offer a scalable solution for rapidly digitizing macroseismic archives, enabling their broader use to constrain ground‐motion models in modern seismic hazard analysis and to improve our understanding of site effects in urban areas. The concepts explored here may also be applied to the handling of other legacy seismological and earth science data.

Seismological Research Letters↗
USGS2024

Separating signals in elevation data improves supervised machine learning predictions for hydrothermal favorability

A recent study identified topography (land surface elevation above sea level) as an important input dataset (feature) for predicting the location of hydrothermal systems in the Great Basin in Nevada. Yet, topography is generally a result of more than one geological process and may consequently contain multiple distinct signals. For example, the geologic evolution of the Great Basin has produced both crustal thickening (i.e., regional-scale trends in elevation) and thinning via Basin and Range extensional faulting (i.e., valley-scale topographic relief). We postulate that these geologic processes may affect the occurrence of hydrothermal systems differently. Therefore, we separate the regional trend from the valley-scale signal in the Great Basin, and then use them separately to evaluate the importance of each as predictors for hydrothermal favorability. Our prior work applying supervised machine learning (ML) using the data from the Nevada Machine Learning Project demonstrated that employing a training strategy that randomly selects negative training sites produces better performing models for predicting hydrothermal favorability than a training strategy that uses expert-selected negatives. The models created using both training strategies exhibited a west-east geographic trend in the predictions for the favorability of hydrothermal resources. These models generally predicted higher favorability in western Nevada and lower favorability in eastern Nevada. This west-east trend in predicted favorability correlates with elevation across the Great Basin, which trends higher from west to east. By separating the original elevation feature into distinct features for elevation trend (i.e., regional-scale topography) and detrended elevation (i.e., valley-scale or local relative topography), we find that models using the separated topographic signals consistently outperform competing models that use the original elevation feature. Although western Nevada still exhibits higher favorability than eastern Nevada, using separated signals for regional elevation and local structure reduces the west-east prediction trend in the region and emphasizes structures associated with hydrothermal upflow. This work emphasizes how carefully engineering features to represent geological conditions relevant to hydrothermal systems allows ML algorithms to detect important patterns for predicting hydrothermal resource favorability and leads to better model performance.

Conference Paper↗
USGS2025

Airborne geophysical analysis to decipher salinization for coastal Louisiana

Coastal Louisiana is known for saltwater intrusion that threatens wetlands, aquifers, and rivers. However, the extent of saltwater intrusion is not well understood. This study develops an innovative framework with airborne electromagnetic (AEM) data to map chloride concentration distributions for wetlands in the Mississippi River deltaic plain and Chenier plain as well as for the Mississippi River Valley alluvial aquifer (MRVA) and Chicot aquifer. Moreover, the framework maps chloride concentrations along the Mississippi River and Atchafalaya River. Key components in the framework include the establishment of resistivity-to-chloride concentration transformation, 3D resistivity architecture building through geostatistics, and the employment of a lithologic model. The transformation functions correlate AEM resistivity data with porewater salinity measurements and groundwater and river chloride samples. The results show that AEM data reliably infers soil water chloride concentrations and correlates well with the distribution of various marsh types. AEM data reveals extensive saltwater presence at depth and near the coast, originating from salt domes and the Gulf of Mexico, respectively. The saltwater upconing pattern in the Chicot aquifer is likely due to excessive groundwater withdrawals. The AEM data also confirms a distinct tongue of saltwater intruding into the Atchafalaya Basin from the Gulf. The AEM data helps to identify faults that are obscured or eroded at the surface, which appear as leaky barriers in the subsurface where dramatic changes in chloride concentration are apparent. Finally, this study uses the AEM data to infer the presence of an extensive seawater wedge in the Mississippi River and Atchafalaya River.

Louisiana↗
USGS2024

Improving crop-specific groundwater use estimation in the Mississippi Alluvial Plain: Implications for integrated remote sensing and machine learning approaches in data-scarce regions

Study region The Mississippi Alluvial Plain (MAP) in the United States (US). Study focus Understanding local-scale groundwater use, a critical component of the water budget, is necessary for implementing sustainable water management practices. The MAP is one of the most productive agricultural regions in the US and extracts more than 11 km 3 /year for irrigation activities. Consequently, groundwater-level declines in the MAP region pose a substantial challenge to water sustainability, and hence, we need reliable groundwater pumping monitoring solutions to manage this resource appropriately. New hydrological insights for the region We incorporate remote sensing datasets and machine learning to improve an existing lookup table-based model of groundwater use previously developed by the U.S. Geological Survey (USGS). Here, we employ Distributed Random Forests, an ensemble machine learning algorithm to predict annual and monthly groundwater use (2014–2020) throughout this region at 1-km resolution, using pumping data from existing flowmeters in the Mississippi Delta. Our model compares favorably with the existing USGS model, with higher R 2 (0.51 compared to 0.42 in the previous model), and lower root mean square error (RMSE) and mean absolute error (MAE)— 0.14 m and 0.09 m, respectively in our model, compared to 0.15 m and 0.1 m in the previous model. Therefore, this work advances our ability to predict groundwater use in regions with scarce or limited in-situ groundwater withdrawal data availability.

Journal of Hydrology Regional Studies↗