Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Near Surface Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

533 records · Page 7Linked to original sources
USGS2025

Refinements to the attenuated propagation of local earthquake shaking (APPLES) ground-motion-based earthquake early warning algorithm

We refined the Attenuated ProPagation of Local Earthquake Shaking (APPLES) ground-motion-based earthquake early warning (EEW) approach, and directly compare APPLES performance with that of the source-characterization-based U.S. ShakeAlert EEW system for a suite of historical earthquakes in the U.S. West Coast and Japan. APPLES is an extension of the Propagation of Local Undamped Motion (PLUM) algorithm in which observed shaking intensity at seismic stations is used to forward-predict intensity distributions to surrounding areas using an attenuation model derived from an intensity prediction equation. We test new configuration options within APPLES, such as using the second highest estimated ground motion rather than the maximum, to better match median ground-motion observations and reduce alerts for small magnitude earthquakes, both of which are key alerting priorities within ShakeAlert. We evaluate these configurations alongside ShakeAlert by comparing the ground-motion estimation accuracy and available warning times relative to station observations and ShakeMap distributions. Our preferred APPLES configuration produces accurate ground-motion estimates and corresponds better with median observations compared to ShakeAlert’s estimates. This preferred configuration substantially reduces alert issuance for M < 5.0 earthquakes compared to the previous APPLES configuration, and alert-release criteria can further restrict alerts to primarily M ≥ 5.5 earthquakes without requiring magnitude estimation. Prioritizing matching median-observed ground motions may reduce APPLES warning times compared to configurations that were tuned to avoid missed alerts (such as those that use the maximum estimated ground motions), which can lead to shorter warning times compared to ShakeAlert for the same alert threshold. However, station-based warning time assessments demonstrate that APPLES can outperform ShakeAlert for high target thresholds. APPLES is a simple, independent EEW approach that may improve the robustness of EEW for the West Coast of the U.S.

California, Oregon, Washington↗
USGS2025

Potential for continental scientific drilling to inform fault mechanics and earthquake science

Our understanding of fault mechanics and earthquake processes remains limited, largely due to minimal direct observations near active faults at seismogenic depths. This lack of data restricts our ability to accurately assess and mitigate both natural and human-induced seismic hazards. However, recent advancements in drilling capabilities and downhole sensing technologies offer an opportunity: the ability to observe the physical conditions within a volume near active fault zones. In this contribution, we highlight how scientific drilling can provide access to the near-fault environment, enabling measurements of the stress, temperature, fluid pressure, and rock properties at depths where ruptures initiate, propagate, and arrest. These observations are essential to refine models of earthquake nucleation and dynamic rupture, bridging gaps between laboratory experiments, numerical simulations, and surface observations. These insights can advance fundamental understanding in earthquake science but also support the development of more effective seismic hazard assessments and risk mitigation strategies.

Seismica↗
USGS2024

Editorial: From cold seeps to hydrothermal vents: Geology, chemistry, microbiology, and ecology in marine and coastal environments

This Research Topic compiles contemporary studies on cold seeps, hydrothermal vents, mud volcanoes, and related seafloor features that are associated with focused fluid emissions and the transfer of carbon, other chemical species, and sometimes heat from the geosphere to the ocean. Because these features sometimes tap fluids and gas originating kilometers below the seafloor, they provide an important window into deep processes that are otherwise inaccessible to scientists. At the shallow portion of their journey, migrating fluids nearing the seafloor contribute to a range of unique biological, physical, and chemical processes within the sediments themselves and at the sediment-water interface. Seafloor fluid emissions play a critical role in global biogeochemical cycles, ocean chemistry, and possibly even climate change. Seafloor leakage points often emit hydrocarbon gases (especially methane and CO 2 ) and are sometimes the loci for deposition of seafloor minerals that have economic value. A burgeoning area of research focuses on natural products generated at these features, seeking compounds with potential pharmaceutical or other applications. Multidisciplinary studies have become routine for characterization of seafloor fluid emission sites, attesting to the inseparability of geologic, physical, chemical, and biological processes in these settings. It is increasingly common for researchers to combine in a single research cruise: subbottom imaging and seafloor mapping; porewater and water column geochemistry and gas sampling; sediment retrieval for lithologic, biostratigraphic, and solid phase analyses; and studies of benthic and subseafloor communities at the microbial to macrofaunal scales. This multidisciplinary approach has the advantage of ensuring the spatial and temporal coincidence of surveys and samples, an important factor at highly dynamic seafloor fluid emission sites. In addition, researchers often use remotely operated vehicles (ROVs), autonomous underwater vehicles (AUVs), or human-occupied vehicles (HOVs) to record video of the seafloor, compile photomosaics, collect targeted samples, and survey with high-resolution geophysical near-seafloor systems, providing a degree of detail about seafloor fluid emission sites that is unprecedented compared to most areas of the deep ocean. While rarer, long-term cabled observatories or shorter-term deployments of portable observatories are also used at some loci for seafloor fluid flux and are particularly helpful for capturing temporal variations at these dynamic features. Here we summarize the Research Topic’s contribution to multidisciplinary seafloor emission studies in the categories of cold seeps, mud volcanoes, and hydrothermal vents. Figure 1 shows the geographic distribution of the studies in this Research Topic and key features referred to in this Introduction.

Frontiers in Earth Science↗
USGS2024

Three-dimensional geologic framework model of the Rio San Jose groundwater basin and adjacent areas, New Mexico

As part of a U.S. Geological Survey study in cooperation with the Bureau of Reclamation and the Pueblo of Acoma, New Mexico, and the Pueblo of Laguna, New Mexico, a digital three-dimensional geologic framework model was constructed for the Rio San Jose and its surface-water drainage basin in west-central New Mexico. This three-dimensional model defines the altitude, thickness, and extent of 18 geologic units for use in a regional numerical hydrologic model. The model included an undifferentiated Proterozoic basement layer, 13 consolidated Paleozoic and Mesozoic rock units, and 4 Cenozoic units. Model input data were compiled from published cross sections, well data, structure contour maps, selected geophysical data, and data derived from geologic maps and structural features in the study area. These data were used to construct faulted surfaces that represent the upper and lower subsurface geologic unit boundaries. The digital three-dimensional geologic framework model combines faults, the altitude of the tops of each geologic unit, and boundary lines depicting the subsurface extent of each geologic unit. The digital three-dimensional geologic model described in this report and the corresponding data release represents the generalized geometry of the subsurface geologic units; it reproduces with reasonable accuracy the input geologic data and is consistent with previously published subsurface conceptualizations of the region. The geologic framework model is at a scale and resolution appropriate for use as the foundation for a numerical hydrologic model of the study area.

New Mexico↗
USGS2025

Characterization of the hydrogeologic framework, groundwater-flow system, geochemistry, and aquifer hydraulic properties of the shallow groundwater system in the Wilcox and Lorraine process areas of the Wilcox Oil Company Superfund site near Bristow, Oklahoma, 2022

The Wilcox Oil Company Superfund site (hereinafter referred to as “the site”) was formerly an oil refinery northeast of Bristow in Creek County, Oklahoma. Historical refinery operations contaminated the soil, surface water, streambed sediments, alluvium, and groundwater with refined and stored products at the site. The Wilcox and Lorraine process areas are where the highest concentrations of volatile organic compounds, semivolatile organic compounds, polycyclic aromatic hydrocarbons, and trace elements (including metals) (collectively hereinafter referred to as “contaminants”) were measured in a local shallow perched groundwater system within the alluvium (hereinafter referred to as the “alluvial aquifer”) at the site during previous site assessments. In order to understand the potential migration of contaminants through the soil and groundwater in these areas, the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency, investigated aquifer characteristics of the alluvial aquifer in the Wilcox and Lorraine process areas of the site to (1) document hydraulic conductivity and other aquifer characteristics of the alluvial aquifer that govern contaminant fate and transport, (2) describe the geospatial extent and concentration of the contaminants in the alluvial aquifer in the Wilcox and Lorraine process areas, and (3) describe the geochemical controls pertaining to oxidation and reduction governing the fate and transport and the degradation potential of contaminants in the groundwater. Various data were compiled and collected to evaluate the aquifer characteristics at the site including the hydrogeologic framework, groundwater-flow system, geochemistry, and hydraulic properties of the aquifer. A total of 20 new (2022) groundwater monitoring wells were installed at the site to collect data used to supplement groundwater-level altitude and groundwater-quality data collected from older, existing groundwater monitoring wells and piezometers. Data compiled and collected for the study were used to evaluate the characteristics of the alluvial aquifer at the site. These aquifer characteristics are defined by the hydrogeologic framework, groundwater-flow system, geochemistry, and hydraulic properties of the aquifer.

Oklahoma↗
USGS2026

Modeled groundwater and surface-water interactions surrounding Mobile Bay, Alabama, 2008–15

The U.S. Geological Survey, in cooperation with the Gulf Coast Ecosystem Restoration Council, has used MODFLOW 6 to develop a groundwater-flow model to simulate groundwater and surface-water interactions in the Mobile Bay, Alabama, area. The model results indicated that, on average, groundwater discharge near the coastline is equal to 2.5 percent of the surface water that flows into the bay. The model was also used to determine how changes in recharge, sea level, and groundwater pumping affect groundwater levels and discharge rates. The results indicate that more groundwater discharge occurred in the winter and spring when recharge was higher, sea level was lower, and groundwater pumping was lower than during the summer and fall. Additionally, the amount of emergent groundwater was closely related to sea level; when sea level was higher, there was more area with emergent groundwater. Furthermore, the depth of nonemergent groundwater was related to trends in recharge and pumping. During periods of increased recharge and reduced pumping, a significant portion of the model area exhibited a depth to the water table of less than 1 meter below the land surface. Conversely, during periods of decreased recharge and heightened pumping, much of the model area showed a depth to the water table ranging from 1 to 5 meters.

Alabama, Mississippi↗
USGS2025

Preliminary depth to basement modeling at Salton Sea, California

The San Andreas Fault – Imperial Fault (SAF-IF) transtensional step-over zone along the southern margin of the Salton Sea hosts substantial geothermal production and lithium brine resources. Recent volcanism at the Salton Buttes and active seismicity along the SAFIF fault system highlight active tectonic and magmatic processes that pose natural hazards and may impact energy and mineral production. Characterizing the subsurface architecture and extent of concealed alteration associated with this tectono-magmatic system enhances understanding of these active processes, associated hazards, and resources. We have compiled a gravity database, consisting of new and re-processed existing data, from which we have constructed a new isostatic residual gravity anomaly map of the Salton trough. We have used this new gravity dataset together with a compilation of publicly available borehole data to develop new depth to basement inversion models for the region. These depth to basement models help to constrain basin geometries, inform alteration mapping, and reveal variations in basement rocks. Due to the concealed nature of the complex tectonic framework at the Salton trough, it is necessary to utilize geophysical methods for subsurface characterization. These new depth to basement models are a first step toward constructing 2D and 3D geophysical and geologic models of the Imperial Valley and Salton Sea geothermal area. This analysis complements other geophysical initiatives, including magnetotelluric (MT) modeling (Tokmakoff et al., 2024), magnetic mapping (Glen and Earney, 2023, 2024) and potential field modeling, and seismic studies focused on hazard and resource investigations in the Imperial Valley.

California↗
USGS1998

Assessment of the hydraulic connection between ground water and the Peace River, west-central Florida

The hydraulic connection between the Peace River and the underlying aquifers along the length of the Peace River from Bartow to Arcadia was assessed to evaluate flow exchanges between these hydrologic systems. Methods included an evaluation of hydrologic and geologic records and seismic-reflection profiles, seepage investigations, and thermal infrared imagery interpretation. Along the upper Peace River, a progressive long-term decline in streamflow has occurred since 1931 due to a lowering of the potentiometric surface of the Upper Floridan aquifer by as much as 60 feet because of intensive ground-water withdrawals for phosphate mining and agriculture. Another effect from lowering the potentiometric surface has been the cessation of flow at several springs located near and within the Peace River channel, including Kissengen Spring, that once averaged a flow of about 19 million gallons a day. The lowering of ground-water head resulted in flow reversals at locations where streamflow enters sinkholes along the streambed and floodplain. Hydrogeologic conditions along the Peace River vary from Bartow to Arcadia. Three distinctive hydrogeologic areas along the Peace River were delineated: (1) the upper Peace River near Bartow, where ground-water recharge occurs; (2) the middle Peace River near Bowling Green, where reversals of hydraulic gradients occur; and (3) the lower Peace River near Arcadia, where ground-water discharge occurs. Seismic-reflection data were used to identify geologic features that could serve as potential conduits for surface-water and ground-water exchange. Depending on the hydrologic regime, this exchange could be recharge of surface water into the aquifer system or discharge of ground water into the stream channel. Geologic features that would provide pathways for water movement were identified in the seismic record; they varied from buried irregular surfaces to large-scale subsidence flexures and vertical fractures or enlarged solution conduits. Generally, the upper Peace River is characterized by a shallow, buried irregular top of rock, numerous observed sinkholes, and subsidence depressions. The downward head gradient provides potential for the Peace River to lose water to the ground-water system. Along the middle Peace River area, head gradients alternate between downward and upward, creating both recharging and discharging ground-water conditions. Seismic records show that buried, laterally continuous reflectors in the lower Peace River pinch out in the middle Peace River streambed. Small springs have been observed along the streambed where these units pinch out. This area corresponds to the region where highest ground-water seepage volumes were measured during this study. Further south, along the lower Peace River, upward head gradients provide conditions for ground-water discharge into the Peace River. Generally, confinement between the surficial aquifer and the confined ground-water systems in this area is better than to the north. However, localized avenues for surface-water and ground-water interactions may exist along discontinuities observed in seismic reflectors associated with large-scale flexures or subsidence features. Ground-water seepage gains or losses along the Peace River were quantified by making three seepage runs during periods of: (1) low base flow, (2) high base flow, and (3) high flow. Low and high base-flow seepage runs were performed along a 74-mile length of the Peace River, between Bartow and Nocatee. Maximum losses of 17.3 cubic feet per second (11.2 million gallons per day) were measured along a 3.2-mile reach of the upper Peace River. The high-flow seepage run was conducted to quantify losses in the Peace River channel and floodplain between Bartow and Fort Meade. Seepage losses calculated during high-flow along a 7.2-mile reach of the Peace River, from the Clear Springs Mine bridge to the Mobil Mine bridge, were approximately 10 percent of the river flow, or 118 cubic feet per second. Calculated seepages along the Peace River in Hardee and De Soto Counties were inconclusive, because most seepages were within the range of discharge measurement error. Two continuous aerial thermal infrared imagery surveys were conducted to locate sites of ground-water discharge along the Peace River. Although temperature and hydrologic conditions were ideal to observe spring flow using thermal infrared imaging techniques, no sources of ground-water discharge were identified using this method. Diffuse ground-water seepage may, however, provide significant ground-water discharge.

Florida↗
USGS2025

Altitude of the potentiometric surface and depth to water in the Mississippi River Valley alluvial aquifer, spring 2022

Potentiometric-surface and depth-to-water maps for spring 2022 were created for the Mississippi River Valley alluvial aquifer (MRVA) using groundwater-altitude data from 1,136 wells completed in the MRVA and from the altitude of the top of the water surface in area rivers from 160 streamgages. The potentiometric-surface and depth-to-water maps for 2022 were created to support investigations to characterize the MRVA as part of the U.S. Geological Survey Water Availability and Use Science Program. Sufficient data were available to map the potentiometric surface and depth to water of the MRVA for spring 2022 for about 83 percent of the aquifer area. The potentiometric contours ranged from 0 to 340 feet (ft) above the North American Vertical Datum of 1988. The regional direction of groundwater gradient was generally to the south-southwest, except in areas of groundwater-altitude depressions, where the groundwater gradient was into the depression, and near rivers, where the groundwater gradient can be from aquifer to the river or from the river into the aquifer. There are large depressions in the potentiometric-surface map in the lower one-half of the Cache region and in much of the Grand Prairie and Delta regions. Depth to water in the MRVA, spring 2022, by well ranged from 5.00 ft above land surface to 145.66 ft below land surface.

Mississippi River Valley alluvial aquifer↗
USGS2025

Comparison of creek and bay influences on salt marsh sediment budget and deposition patterns

The resilience of salt marshes with low organic production depends on their effective capture and retention of mineral sediment from adjacent waters. Little prior work has directly compared mechanisms of sediment import from wave-influenced marsh boundaries against those of tidal creeks. We used simultaneous deployment of net-deposition tiles and oceanographic sensors to identify the timing and magnitude of sediment import/export to, and redistribution within, a marsh in south San Francisco Bay. As the marsh has both an eroding bay-exposed scarp and a prominent tidal creek, we investigated the mechanisms and magnitudes of sediment import from the marsh-bay versus the marsh-creek interface. The strong daily sea breezes of the summer season produced most of the wave-driven erosion of the marsh scarp and controlled suspended sediment concentrations; the winter season had weaker winds punctuated by a few storms. A large seasonal difference in suspended sediment concentrations influenced both flood and ebb sediment fluxes to the marsh and led to much higher rates of import in the summer. Both bay-side and creek-side processes were important to total marsh sediment budget. Bay-side sediment contributions were more variable in time due to the bay-influenced environment, and creek-side contributions were overall larger, reflecting the large proportion of the marsh fed by creek water. Sediment was redistributed throughout the system, with erosion near the bay-edge, accretion near the creek-edge and slow import to the marsh interior. The marsh was net importing sediment in the summer and exporting in the winter from different rates of these processes; on an annual scale, the marsh was net importing despite rapid lateral marsh loss. These findings emphasize that a positive sediment budget does not imply a stable marsh and that both creek- and edge-side dynamics are important for marsh sedimentation and geomorphic trajectories. Further, we expand understandings of non-storm and seasonal controls on marsh sedimentation.

California↗
USGS2025

An unexplained tsunami: Was there megathrust slip during the 2020 Mw7.6 Sand Point, Alaska, earthquake?

On October 19, 2020, the M w 7.6 Sand Point earthquake struck south of the Shumagin Islands in Alaska. Moment tensors indicate the earthquake was primarily strike-slip, yet the event produced an enigmatic tsunami that was larger and more widespread than expected for an earthquake of that magnitude and mechanism. Using a suite of hydrodynamic, seismic, and geodetic modeling techniques, we explore plausible causes of the tsunami. We find that strike-slip models consistent with the moment tensor orientation cannot produce the observed tsunami. Hydrodynamic inversion of sea surface deformation from deep ocean and tide gauge data suggest seafloor deformation more closely matches a megathrust, rather than a strike-slip, source. Static slip inversions, using sea level and Global Navigation Satellite System data, allow for a portion of co-seismic megathrust slip that can explain tsunamigenesis. Combining all available geophysical datasets to model the kinematic rupture, we show that considerable, relatively slow, megathrust slip is allowable in the Shumagin segment, concurrent with strike-slip faulting. We hypothesize that the slow megathrust rupture does not contribute much seismic radiation allowing it to previously go unnoticed with traditional seismic monitoring.

Alaska↗
USGS1999

Water quality of Rob Roy Reservoir and Lake Owen, Albany County, and Granite Springs and Crystal Lake Reservoirs, Laramie County, Wyoming, 1997-98

The water quality of four reservoirs was assessed during 1997 and 1998 as a cooperative project between the Cheyenne Board of Public Utilities and the U. S. Geological Survey. The four reservoirs, Rob Roy, Lake Owen, Granite Springs, and Crystal Lake, provide approximately 75 percent of the public water supply for Cheyenne, Wyoming. Samples of water and bottom sediment were collected and analyzed for selected physical, chemical, and biological characteristics to provide data about the reservoirs. Water flows between the reservoirs through a series of pipelines and stream channels. The reservoirs differ in physical characteristics such as elevation, volume, and depth. Profiles of temperature, dissolved oxygen, specific conductance, and pH were examined. Three of the four reservoirs exhibited stratification during the summer. The profiles indicate that stratification develops in all reservoirs except Lake Owen. Stratification developed in Rob Roy, Granite Springs, and Crystal Lake Reservoirs by mid-July in 1998 and continued until September, with the thickness of the epilimnion increasing during that time. Secchi disk readings indicated Rob Roy Reservoir had the clearest water of the four reservoirs studied. The composition of the phytoplankton community was different in the upper two reservoirs from that in the lower two reservoirs. Many of the species found in Rob Roy Reservoir and Lake Owen are associated with oligotrophic, nutrient-poor conditions. In contrast, many of the species found in Granite Springs and Crystal Lake Reservoirs are associated with mesotrophic or eutrophic conditions. The total number of taxa identified also increased downstream. The chemical water type in the reservoirs was similar, but dissolved-solids concentrations were greater in the downstream reservoirs. Water in all four reservoirs was a calcium-bicarbonate type. In the fall of 1997, Rob Roy Reservoir had the lowest dissolved-solids concentration (19 milligrams per liter), whereas Crystal Lake Reservoir had the highest concentration (63 milligrams per liter). Relatively little differences in the concentrations of major-ion species were noted between samples collected near the surface and near the bottom of the same reservoir. In contrast, iron and manganese concentrations generally were higher in samples collected near the bottom of a reservoir than in near-surface samples collected from the same reservoir. Composite bottom-sediment samples from all four reservoirs contained similar concentrations of bulk constituents such as aluminum, iron, phosphorus and titanium, but varied in concentrations of trace elements. Trace-element concentrations in Rob Roy Reservoir and Lake Owen were similar to the crustal average, whereas in Granite Springs and Crystal Lake Reservoirs the concentrations were similar to granitic rocks.

Wyoming↗
USGS2025

Widespread anhydrite saturation in Laramide-age arc magmas of southwestern USA

Anhydrite is considered a rare mineral phase in magmas, with only ∼33 documented occurrences worldwide. However, anhydrite readily decomposes in the near-surface environment, making it difficult to recognize its former presence in rocks collected at or near Earth’s surface. In such samples, only small anhydrite inclusions fully shielded within other minerals can have survived. During a recent field trip to the southwestern USA, we sampled 17 Laramide-age (ca. 40−80 Ma) magma systems, most of which are associated with porphyry copper deposits. A systematic search for anhydrite inclusions preserved within apatite, amphibole, plagioclase, and quartz phenocrysts in ∼100 rock samples by optical microscopy and Raman spectroscopy revealed that each of these 17 magma systems was at least temporarily anhydrite-saturated. Also, most previously identified magmatic anhydrite-bearing intrusions are associated with porphyry copper deposits, and both intrusive and volcanic rocks containing magmatic anhydrite show high Sr/Y ratios. These observations suggest that anhydrite saturation and porphyry copper formation are linked via magma fractionation at high pressure. Compared to average arc magmas, anhydrite-bearing magmas are unusually oxidized and sulfur-rich and seem to also be unusually water-rich. Hence, our preferred interpretation is that magma generation and/or fractionation at high pressure promotes the formation of superhydrous and oxidized magmas, which in turn promotes high sulfur contents and ultimately the precipitation of anhydrite. The high mineralization potential of these magmas does not need to result from their high sulfur content but could be caused by other properties of high-pressure magmas.

Arizona, New Mexico↗
USGS2026

Altitude of the potentiometric surface and depth to water in the Mississippi River Valley alluvial aquifer, spring 2024

Potentiometric-surface and depth-to-water maps for spring 2024 were created for the Mississippi River Valley alluvial aquifer using groundwater-altitude data from 1,151 wells completed in the Mississippi River Valley alluvial aquifer and from the altitude of the top of the water surface in area rivers from 160 U.S. Geological Survey and U.S. Army Corps of Engineers streamgages. The potentiometric-surface and depth-to-water maps for 2024 were created to support investigations to characterize the Mississippi River Valley alluvial aquifer as part of the U.S. Geological Survey Water Availability and Use Science Program. Sufficient data were available to map the potentiometric surface and depth to water of the Mississippi River Valley alluvial aquifer for spring 2024 for about 83 percent of the aquifer area. The potentiometric contours ranged from 0 to 330 feet (ft) above the North American Vertical Datum of 1988. The regional direction of the groundwater gradient was generally to the south-southwest, except in areas of groundwater-altitude depressions, where the groundwater gradient direction was into the depression, and near rivers, where the groundwater gradient direction was either from the aquifer to the river or from the river into the aquifer. Groundwater depressions in the potentiometric-surface map are in the lower one-half of the Cache region and in most of the Grand Prairie and Delta regions. Depth to water by well in the Mississippi River Valley alluvial aquifer in spring 2024 ranged from 0.27 ft above land surface to 145.65 ft below land surface.

Arkansas, Illinois, Kentucky, Louisiana, Mississip↗
USGS2025

Hydrogeologic framework of the Mountain Home area, southern Idaho

In the arid western Snake River Plain around the City of Mountain Home, Idaho, declining groundwater levels concern agricultural, municipal, and other water users who rely on groundwater for sustenance because surface-water resources are limited. The U.S. Geological Survey developed this hydrogeologic framework to provide an updated characterization of groundwater resources in the western Snake River Plain around the City of Mountain Home. The hydrogeologic framework comprises: (1) a conceptual description of hydrogeologic units, (2) a three-dimensional hydrogeologic model and borehole database, (3) a map of groundwater levels and change, and (4) a discussion of groundwater occurrence and movement within the study area. Hydrogeologic units were defined based on existing literature and the borehole database compiled for this study; the five hydrogeologic units are granite, rhyolite, basalt, fine-grained sediments, and coarse-grained sediments. Each unit can bear water, but the main regional aquifer in the study area occurs in the basalt and fine-grained sediment units with depth to water ranging from 150 to 765 feet. A perched groundwater zone near the City of Mountain Home is primarily hosted in basalt and used domestically with most depths to water ranging from 30 to 100 feet. Interflow zones, scoria, and vertical fractures create heterogeneity within the basalt hydrogeologic unit that exerts strong control on groundwater movement, creating horizontal perching conditions and zones of enhanced vertical conductivity that facilitate downward groundwater percolation. In the fine- and coarse-grained sediments and rhyolite units, inferred faults both impede and enhance groundwater movement. The borehole database was constructed by digitizing 540 well-driller reports and was used to build a three-dimensional hydrogeologic framework model which reasonably represents the spatial distribution of hydrogeologic units in the study area. Generally, fine-grained sediments underlie much of the study area, with basalt concentrated in the central and western study area and rhyolite and granite in the uplands to the north. Groundwater levels were measured in 180 wells in March and November 2023; these data were used to develop water-table contour maps and describe groundwater-level change over an irrigation season. Groundwater generally flows south-southwest to the Snake River and groundwater levels declined across most of the study area (from 0.03 to 22.01 feet) between spring and autumn 2023, which is consistent with long-term declines in the Cinder Cone Butte Critical Groundwater Area and Mountain Home Groundwater Management Area. Groundwater levels rose (0.6 to 15.44 feet) over the irrigation season in most wells in the perched groundwater zone near the City of Mountain Home and near the Snake River, indicating the importance of surface-water recharge to groundwater in areas where surface water irrigation occurs. In aggregate, this hydrogeologic framework provides an updated characterization of and new insights into groundwater resources in the study area to help inform water resources management.

Idaho↗
USGS2024

Predicting hydrothermal reservoir depth from chemical geothermometers using a three-dimensional temperature model in the Great Basin, USA

Recent work in the Great Basin region of the western United States has made it possible to predict the depth of hydrothermal reservoirs (i.e., the depth at which heat is accumulated prior to ascent via hydrothermal upflow) identified through geochemistry and to contextualize the spatial patterns of these reservoir depths. Chemical geothermometers use the chemical and mineral constituents of hydrothermal fluids to predict the temperature at which fluids equilibrated with the host rocks at depth. Assuming that most of the Great Basin is dominated by conductive conditions until a vertically connected hydrothermal flow path is created (e.g., by faulting), geothermometers reflect the chemical and thermal conditions at the depth interval that the fluid has conductively equilibrated over a long period before a vertical conduit allows convective upflow. By pairing geothermometer temperature estimates with our recent three-dimensional temperature model of conductive heat flow in the Great Basin, we estimate the corresponding reservoir depths and construct a map of circulation depths. The predicted depths from geothermometers have spatial patterns across the Great Basin that relate to patterns seen in other geologic and geophysical data. Deeper springs generally occur disproportionately in areas with higher strain rates and in basins. We posit that current elevated strain rates reflect patterns of historic deformation where ongoing tectonic activity maintains permeable pathways to deeper reservoirs, some of which are estimated to exceed 6 km depth. Basins, as expected, contain a disproportionate number of these deep systems, because the underlying aquifers are closer to the surface in basins, thus requiring less water pressure to reach the surface than in mountain ranges. Most springs estimated to have their source in a deep reservoir occur at places known to host a hydrothermal system; these refined depth estimates of the source reservoir can help to better constrain the source depth for many known hydrothermal systems across the Great Basin.

Arizona, California, Idaho, Nevada, Oregon, Utah↗
USGS2026

Latest Pleistocene to 19th-century earthquakes on bending-moment reverse faults of the Seattle fault zone, Washington

Fault-related folds and their associated secondary faults play a critical yet often underrecognized role in accommodating strain and generating earthquakes in active fold-and-thrust belts. In the Seattle fault zone (SFZ), Washington, USA, we present new paleoseismic, geomorphic, and geophysical evidence for late Pleistocene and Holocene earthquakes on shallow, south-dipping secondary faults—the Lytle Beach and Vasa Park faults—that lie within the hanging wall of the greater SFZ and are on trend with the primary, blind Blakely Harbor fault. Our data show that these structures have ruptured independently, producing localized uplift and deformation at the surface, with the most recent event (RH2) likely occurring in the early nineteenth century. While a temporal overlap between the late Pleistocene RH1 and VP1 earthquakes raises the possibility of a ≥35 km rupture along the Blakely Harbor fault, structural and temporal evidence instead supports independent rupture on individual faults related to folding. We interpret these faults as bending-moment reverse faults that formed within a synclinal hinge zone of the main fault, reflecting mechanical and kinematic influences of the broader fault system. Combined with prior studies, our findings indicate that faulting related to folding dominates the mode of strain release within the SFZ since the late Pleistocene with more frequent earthquake recurrence (∼350 yr) over the past ∼2500 yr.

Washington↗
USGS2025

Utilizing downhole datasets for modelling the aeromagnetic signature of the Iron Creek Co-Cu deposit in the Idaho Cobalt Belt

The Idaho Cobalt Belt in east-central Idaho is host to some of the largest domestic Co resources, including the informal Iron Creek deposit. The two main ore zones of this deposit, the Iron Creek and the Ruby, are hosted in greenschist-grade interbedded argillite/siltstone and quartz-rich units of the Mesoproterozoic Apple Creek Formation of Lemhi Group. The primary ore mineral is cobalt-bearing pyrite, which occurs with pyrrhotite, chalcopyrite, and magnetite. This study integrates mineralogical and core-scale geophysical measurements with regional-scale aeromagnetic surveys. The high magnetite content within the Ruby zone produces elevated magnetic susceptibility, but the relatively limited spatial footprint of the ore zone would produce a small-scale anomaly that may be overlooked in regional surveys. The low magnetite content in the Iron Creek zone results in low magnetic susceptibility, creating a relatively low amplitude geophysical response. By characterizing the magnetic properties and mineralogy of these ore zones, this study enhances the interpretation of aeromagnetic data, enabling the identification of small or faint anomalies as potential Co targets. These findings improve can improve exploration strategies, both within the Idaho Cobalt Belt as well as for similar deposit types globally.

Idaho↗