SEARCH · Geology Reports

Results for “Geochemical Perspectives Letters”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

185 records · Page 7Linked to original sources

USGS2026

Distributed faulting of the northern West Napa Fault Zone in Napa Valley, California

Mapped surface ruptures from the 24 August 2014 M w 6.0 South Napa earthquake in the Napa Valley, California, show a 2‐km‐wide zone of distributed faulting in the southern and central West Napa fault zone (WNFZ). In the northern WNFZ at Hendry Winery (HW), however, the mapped 2014 surface ruptures encompass an ∼100‐m‐wide zone, implying significant narrowing of the near‐surface fault zone to the north. We present a tomographic shear‐wave velocity ( ⁠⁠ V S ) model and guided‐wave data that indicate the northern WNFZ is at least 400‐m wide, with multiple near‐surface fault traces. Our V S model shows that the 2014 surface ruptures are underlain by discrete low‐velocity zones (LVZs), and coincident guided‐wave data show that the LVZs carry fault‐zone guided waves. If nearby (<500 m) mapped faults to the east of HW are part of the WNFZ, the entire WNFZ is more than 1 km wide in the northern Napa Valley. WNFZ guided waves travel up to 38% slower than S body waves, and low‐strain guided‐wave shaking is up to five times stronger than the associated body‐wave shaking. Our data suggest that guided waves, traveling along distributed faults, may result in an increased shaking hazard over a 1‐km‐wide area of the northern Napa Valley during future significant earthquakes. In places, the 2014 surface ruptures were difficult to find one year after the earthquake, and paleoseismic trenching showed only weak evidence for faulting, which may not have been identified in trenches if the locations of the 2014 surface ruptures had not been previously mapped ( Prentice et al. , 2015 ). Guided‐wave and V S tomography data, however, show strong evidence for faulting beneath the 2014 surface ruptures and at locations to the east. Although paleoseismic trenching is the gold standard for identifying near‐surface faulting, methods such as peak ground velocities of guided waves may better identify immature near‐surface fault traces.

California↗

USGS2025

Quantitative evaluations of earthquake early warning performance using “Did You Feel It?” and post-alert surveys

We examine responses to the U.S. Geological Survey’s “Did You Feel It?” (DYFI) survey and its companion earthquake early warning (EEW) questionnaire to assess the performance of the U.S. ShakeAlert EEW system directly from the alert recipients’ perspectives. ShakeAlert rapidly detects earthquakes and develops alert information, but as official alert delivery partners issue these alerts, it is thus difficult to determine how many people were alerted and when. We investigate DYFI reports for six California earthquakes that had EEW alerts and substantial responses to the DYFI EEW questionnaire. Comparisons of ShakeAlert predictions to reported intensities demonstrate that magnitude estimation accuracy is not necessarily indicative of ground-motion prediction accuracy. Perceived warning time distributions indicate that estimating maximum-expected warning times using the S-wave arrival is a reasonable assumption when discussing public EEW performance. However, we also find many reports of shorter warning times, late alerts, and missed alerts than expected based on ShakeAlert publication times, suggesting alert delivery latencies are substantial and highly variable. The novelty of our analysis is that we demonstrate that the DYFI EEW survey provides useful EEW efficacy information—independent of the specific alerting pathway—that can be used to inform our choices for conveying EEW performance.

California↗

USGS2024

Geologic input databases for the 2025 Puerto Rico – U.S. Virgin Islands National Seismic Hazard Model update: Crustal faults component

The last National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI) was published in 2003. In advance of the 2025 PRVI NSHM update, we created three geologic input databases to summarize new onshore and offshore fault source information in the northern Caribbean region between 62°–70° W and 16°–21° N. These databases, of fault sections, fault‐zone polygons, and geologic estimates of fault activity (fault‐slip rate and earthquake recurrence intervals) at specific sites, document updates to fault parameters used in prior seismic hazard models in PRVI. Fault sources were reviewed from published studies since 2003, which document substantial changes to the understanding of fault location, geometry, or activity. New fault section sources were added for features that meet the criteria of (1) length ≥7 km, (2) unequivocal evidence of recurrent tectonic Quaternary activity, and (3) documentation that is publicly available in a peer‐reviewed source. In addition, we revised several broad areal sources, such as the Mona and Anegada extensional zones. The 2003 model included three fault sections and two fault‐zone polygons (areal sources). These databases include 35 fault sections, 6 fault‐zone polygons, and 51 earthquake geology sites. To characterize fault activity rates, slip‐rate bins were assigned based on landscape expression and paleoseismic trench observations for faults without published slip‐rate sites. Additional fault sources were evaluated but not included in these databases due to a lack of published information about fault location, geometry, or recurrent Quaternary activity. The PRVI NSHM 2025 geologic input databases describe crustal faulting; the geometries and coupling of Puerto Rico subduction zone and Muertos Trough models are considered in a separate database. Updates to the fault sections, fault‐zone polygons, and earthquake geology databases can help inform the location and recurrence rate of damaging earthquakes in the PRVI NSHM implementation.

Puerto Rico, U.S. Virgin Islands↗

USGS2024

New U-Pb geochronology and geochemistry of Paleozoic metaigneous rocks from western Yukon and eastern Alaska, cross-border synthesis, and implications for tectonic models

The tectonic evolution of and relation between the Yukon-Tanana terrane and the Lake George assemblage, as well as other associated tectonic assemblages in western Yukon and eastern Alaska, have been debated for decades. The Yukon-Tanana terrane is widely considered to be an allochthonous rifted fragment derived from the Laurentian continental margin, whereas the Lake George assemblage and associated assemblages are currently interpreted to be part of the parautochthonous continental margin of western North America (Laurentia). To address these topics, we present 40 new U-Pb zircon ages and 20 new whole-rock geochemical analyses. We incorporate these data into a new compilation of available geological mapping for a large area that straddles the Alaska-Yukon border, together with 34 previously published U-Pb age determinations and an extensive geochemical database of metaigneous rocks from Late Devonian to Early Mississippian and middle to late Permian assemblages in this area. Magmatism in the Lake George assemblage and related assemblages occurred in two pulses from about 371 to 360 and from about 358 to 347 million years ago (Ma); geochemical discrimination diagrams indicate a large crustal component, possibly indicative of arc magmatism, for felsic metaigneous rocks and a range of tectonic environments for mafic rocks. Magmatism in the Fortymile River and related assemblages, and parts of the Nasina assemblage—all parts of the Yukon-Tanana terrane—are mainly Early Mississippian and span a crystallization age range from about 361 to 343 Ma; geochemical discrimination diagrams for these rocks indicate primarily arc geochemical signatures for both mafic and felsic rocks. Middle to late Permian crystallization ages (about 261–253 Ma) are indicated for felsic metaigneous rocks in the Klondike assemblage and some of the felsic metaigneous rocks in the Nasina assemblage. Based on our mapping, we propose the existence of a possible unconformity between the Mississippian and Permian felsic metavolcanic rocks within the Nasina assemblage that is marked by sporadic occurrences of stretched-pebble conglomerate. Our combined database supports the well-established model of a magmatic arc comprising the Fortymile River and Finlayson assemblages of the rifted Yukon-Tanana terrane continental fragment on which a middle to late Permian arc (Klondike assemblage) was later built. The assemblages of the Yukon-Tanana terrane were subsequently intruded by Late Triassic to Early Jurassic granitoids, presumably during reaccretion of the Yukon-Tanana terrane to the continental margin. Permian and Late Triassic to Early Jurassic intrusions have not been mapped in the now structurally lower plate Lake George assemblage; their absence is one of the lines of evidence that have been used to support the parautochthonous, rather than allochthonous, origin of the Lake George assemblage and related assemblages. Our new data, together with previously published ranges of igneous crystallization ages and geochemical tectonic signatures of the Late Devonian to Early Mississippian magmatic rocks in the Lake George assemblage and associated assemblages and in the Fortymile River, Nasina, and correlated assemblages of the Yukon-Tanana terrane, indicate that the currently accepted interpretation of the Lake George assemblage and associated rocks being part of parauthochthonous North America is not the only possible interpretation of this tectonic entity. Approximately half of the dated intrusive rocks in the Lake George assemblage are contemporaneous with the metaigneous rocks of the Yukon-Tanana terrane arc (<361 Ma). We speculate that our approximately 361 Ma U-Pb age for quartz syenite in part of the North American continental margin in south-central Yukon defines the beginning of rifting of the Laurentian margin. Although the currently favored model of prolonged middle Paleozoic subduction and extension in both the Yukon-Tanana terrane and parautochthonous North America allows for simultaneous middle Paleozoic magmatism on both sides of the Slide Mountain Ocean, we now propose an alternative hypothesis in which the Lake George assemblage represents a deeper part of the rifted Yukon-Tanana terrane arc. If this is the case, the absence of Permian and Late Triassic to Early Jurassic arc rocks in the Lake George assemblage could be explained either by the arcs of these ages not being wide enough to have affected the Lake George assemblage or by tectonic displacement of these arc rocks away from the Lake George assemblage. Our approximately 259 Ma U-Pb zircon age and geochemical analyses of metarhyolite in the Seventymile terrane in Alaska, which comprises remnants of the back-arc basin that separated the Yukon-Tanana terrane from the Laurentian continental margin, confirm the presence of a late middle Permian volcanic arc component to the terrane. Our approximately 319 Ma U-Pb zircon age from the Chicken assemblage (as redefined in this study) in eastern Alaska, combined with previously reported fossil ages and a U-Pb zircon age from this assemblage, indicate that it is a Late Mississippian to Early Pennsylvanian arc assemblage. We propose several other relatively young, locally developed arc assemblages outboard of the ancient continental margin of Laurentia that may correlate with the Chicken assemblage, but we consider its origin to remain an enigma.

Alaska↗

USGS2026

Surface rupture and slip distribution of the 2025 Mw7.7 Mandalay earthquake and updated length scaling of supershear earthquakes

The 2025 M w 7.7 Mandalay, Burma (Myanmar), earthquake ruptured 475 km of the central Sagaing fault and is the longest continental strike-slip rupture on record. The observed rupture length is 1.6–4.7 times the value expected (100–300 km) from existing length-magnitude scaling relations for strike-slip earthquakes. The earthquake resulted from shallow dextral faulting and ruptured bilaterally with supershear speeds south of the epicenter, rupturing close to three major cities in Myanmar and exposing over six million people to violent or extreme shaking. We report on the surface rupture character, length, and slip distribution based on sub-pixel correlation of Sentinel-2 (10 m) and Planet Dove (3 m) optical images and visual analysis of SkySat and WorldView (0.3–0.5 m) optical images. The earthquake had moderate surface slip (average = 3.3 m, maximum = 5.6 m, 25–75% range = 3.0–4.0 m), narrow deformation zone width (1–10 pixels in sub-pixel correlation and up to 190 meters for the detailed surface rupture mapping), and simple fault geometry (no stepovers or large changes in strike, 87% of the rupture that was mapped in detail is single-stranded). We attribute the extreme length of the Mandalay earthquake to supershear rupture speed, simple fault geometry, narrow down-dip width, and moderate surface slip. Based on a compilation of 25 supershear strike-slip earthquakes ( M w 6.5–8.6; 1979–2025), we find that the rupture length of supershear earthquakes does not fit empirical scaling relationships for strike-slip earthquakes that predict length from magnitude. A length-magnitude scaling relationship based on supershear earthquakes has a best fit of log 10 (surface rupture length) = 0.89 M w – 4.44, indicating that supershear earthquakes tend to be longer than their subshear counterparts for any given magnitude and thus may expose a greater population to shaking.

Mandalay↗

USGS2024

Identifying transportation data and system needs for a Federal lands transportation data platform

Executive Summary Modern transportation and land-use planning efforts include information from many sources to address topics such as safety, efficiency, commercial, and social needs. This wide breadth of topics provides opportunities for collaboration and development of common tools for diverse users. In many cases, different information systems provide the spatial data and geographic content necessary for transportation and land-use planners to consider multiple lines of evidence. The Federal Highway Administration Office of Federal Lands Highway (FLH) and Federal Land Management Agency partners use detailed spatial and quantitative data to inform transportation decisions. However, logistic challenges to data sharing exist because data are often managed by separate agencies; data-exchange frameworks and interagency data agreements are insufficient; and consistency from aggregated data requires maintenance, coordination, and supporting infrastructure. The FLH and U.S. Geological Survey collaboratively examined (1) use and availability of spatial data for transportation planning and (2) a possible mechanism to use more shared and consistent data in a common planning environment. The goals of this collaborative effort were to describe data needs from the perspective of planners and to identify opportunities for shared data resources. Results presented here focus on two workshops and a subsequent investigation of data and tools available from partner agencies. The objectives of this report are to (1) describe information used in transportation planning with geographic data; (2) identify spatially explicit data that inform transportation plans and could be shared among all partners; and (3) describe current platforms, planning and administrative opportunities, and potential barriers to developing an integrated planning tool. Key information and data needs were identified in three major classes: system, user, and influential factors. System data are parts of the transportation network and information about the condition of individual segments and the network. User data provide details about the function of the system and insights into potential needs; for example, user trips between source and destinations inform road and network demands that can lead to congestion and safety issues (in the future, user data might also include scenarios and projections based on land-use plans). Influential data represent social and environmental factors that influence transit demands and network conditions. These factors could be popular locations or seasonal events that influence demand and congestion; wildlife habitat or migration intersections that affect safety and management priorities; or geologic features that influence hazards, maintenance, and safety. Responses described here provide specific information for web-tool design and give a framework for interagency communication and cooperation to address specific information needs for integrated planning. Existing web-mapping and web-services, and the data that inform them, are also described. Commonly, these data are created and published by one agency, and the core users are outside of that agency; for example, threatened species distributions are published by the U.S. Fish and Wildlife Service for consideration by planners in advance of National Environmental Policy Act (42 U.S.C. 4321 et seq.) evaluation. This report is provided to inform FLH leaders and Federal Land Management Agency partners by articulating user needs and requirements for integrated planning tool(s). Programmers creating a secure web-based data-sharing platform (with data-viewing, -analysis and -download functions) can use the information presented here to organize data and user interfaces. This integrated perspective can help FLH and Federal Land Management Agency partners develop transportation networks that better serve the needs of people in local communities and across States and the Nation.

Open-File Report↗

USGS2026

A methods framework for evaluating measurement consistency across spectrometers for multispectral uncrewed aerial system vegetation mapping applications

The U.S. Geological Survey collects remote sensing data to support national scientific assessments of natural resources, hazards, and landscape change. Spectrometers and spectroradiometers are essential for gathering point-based spectral measurements used in applications such as uncrewed aerial systems (UAS) multispectral image calibration, validation, and analysis. Evaluating how different instruments perform in laboratory and field environments helps determine whether they provide consistent, interoperable measurements. Such verification can expand access to spectral ground data during UAS operations by allowing scientists to use alternative instruments when budgets, logistics, or field conditions limit options. We propose and test a methodological framework for evaluating spectrometers for measurement consistency during UAS multispectral vegetation mapping applications. There are three central evaluation components to the framework: laboratory, field, and relative to UAS multispectral imagery. By evaluating the instruments in both relatively controlled and uncontrolled environments, we thoroughly examine measurement consistency and when/why measurements may differ. We opportunistically selected two instruments for a case study in a coastal marsh setting: a compact laboratory spectrometer we modified for field use and a field-ready spectroradiometer. The instruments produced consistent measurements in both environments. We found differences between the field spectra and UAS spectra that likely reflect the perspectives of ground vs. aerial data and indicate that further radiometric calibration may be needed.

Massachusetts↗

USGS2026

Groundwater quality near an oil field in a stream-dominated recharge setting, California, USA

Alluvial valley aquifers are important sources of water supply in many areas but effects of co-located oil and gas development on these resources have not been widely reported, especially in settings where recharge is dominated by stream infiltration. Interpreting the presence of geochemical indicators in the context of hydrology, geology, and other factors provides a more complete understanding of the relations between groundwater and sources of oil-field fluids and aids in identifying risks associated with oil and gas development. Groundwater and Salinas River water samples were collected in an alluvial valley near the San Ardo Oil Field in Monterey County, California and analyzed for a wide range of dissolved chemical, gas, and isotopic constituents to determine if oil-field fluids (water and gas from oil-producing and non-producing zones) have mixed with fresh groundwater used for supply. Hydraulic gradients, age-dating tracers, and other geochemical indicators show that recharge from the Salinas River has the potential to dilute oil-field fluids that might migrate or seep into the aquifer. Groundwater and Salinas River water collected downgradient of the San Ardo Oil Field showed little or no evidence of mixing with oil-field fluids. Some samples within the oil field contained trace amounts of hydrocarbons or elevated temperatures, indicating that any potential effects from oil-field activities are minor or have been diluted by recharge from the Salinas River. The two samples with the most geochemical evidence of potential mixing with oil-field fluids (SP-18 and GW-17) were collected west of or along the Los Lobos fault, where naturally occurring hydrocarbons are near the land surface. Those samples are also near active or inactive oil-field wells, and so anthropogenic activities and pathways cannot be ruled out as a cause of trace detections of hydrocarbons and elevated temperatures in the aquifer.

California↗

USGS2025

Stable isotope composition and geochemistry of calcite and dolomite in the Mountain Pass carbonatite: A lens into petrogenesis

Carbonatites host most of the global rare earth element (REE) deposits. The petrogenesis of these rocks, including magmatic and post-magmatic processes, are poorly understood but critical in forming and upgrading these deposits. The Mountain Pass carbonatite, which hosts the only active REE mine in North America, is lithologically variable but consistently contains >50% calcite and/or dolomite. Multiple generations of carbonates are evident, suggesting bulk analysis of carbonate minerals would generate a mixed isotopic and geochemical signature. In-situ stable carbon and oxygen isotopes, combined with geochemical analysis and petrography, distinguish carbonate generations, trace the source region of the carbonatite magma, and link carbonate genesis to REE mineralization throughout the intrusion. Primary carbon and oxygen isotope values outside the accepted mantle range may suggest a subduction-related carbon and oxygen source in the mantle. Deformation textures in primary calcite indicate syn- or post-crystallization ductile flow. Carbonates with secondary textures and heavy δ 13 C and δ 18 O values are associated with ore mineralization, suggesting fluid mobilization was important in concentrating REE and upgrading of the Mountain Pass deposit.

California↗

USGS2026

3D semantic mapping of surface geological features

Semantic mapping in 3D is fundamental to a wide range of geoscientific studies and applications, including geomorphology, hazard assessment, and environmental monitoring. However, automatically segmenting geological features from large-scale photogrammetric datasets remains a significant challenge. We present a methodology to address this gap. Using overlapping images collected over environments of interest, Structure-from-Motion (SfM) produces georeferenced point clouds and estimates camera poses. Existing large vision models, such as Segment Anything Model, segment objects in the images, generating pixel-segmentation associations. To produce pixel-point associations, we project the points back onto the camera image planes. As objects are independently segmented across multiple images with different perspectives, we develop a segmentation mosaicking algorithm to build probabilistic point-segmentation associations that combines the pixel-segmentation associations and pixel-point associations. Our methodology is validated using both synthetic data generated by Kubric and real-world UAV-SfM data. The implementation is designed to be compatible with existing SfM software, including Agisoft and OpenDroneMap, for photogrammetry mapping in geoscience studies. As a case study, we apply our method to the semantic mapping of precariously balanced rocks (PBRs), which provide upper-bound constraints on historical ground motion shaking intensity. To support object-level identification of PBRs, we additionally integrated Grounding DINO, enabling text-prompted segmentation of features of interest within UAV imagery. This case study demonstrates the effectiveness of our method in generating a 3D semantic map of PBRs, enabling spatial distribution of PBR fragility for earthquake hazard analysis.

Computers & Geosciences↗

USGS2025

Geochemistry and radiogenic isotopes constrain the mantle source region of the Mountain Pass Intrusive Suite, California

The Mountain Pass carbonatite stock is the largest rare earth element (REE) deposit and only active REE mine in the United States. The carbonatite intrusion and spatially associated alkaline silicate intrusions constitute the Mountain Pass Intrusive Suite, which is located within the Mojave Province in California. Both the carbonatite and the alkaline silicate rocks are enriched in large ion lithophile elements and light REEs, and less enriched to depleted in high field strength elements, indicating the mantle source region was metasomatically enriched in incompatible trace elements. The cause of this metasomatic mantle enrichment and the genetic relationship between the carbonatite and the alkaline silicate stocks are poorly understood. In this study, major and trace element geochemical data and isotopic (Rb-Sr, Sm-Nd, and Lu-Hf) data are presented to constrain genesis of the Mountain Pass Intrusive Suite, from mantle source region to the intrusion of the stocks. Our geochemical data are consistent with derivation of the alkaline silicate and carbonatite melts through partial melting from a shared mantle source region rather than through liquid immiscibility or fractional crystallization and separation of a carbothermal fluid. Although the Rb-Sr isotopic system in the Mountain Pass Intrusive Suite is disturbed at the whole-rock scale, the isotopic systems for whole-rock Sm-Nd (εNd i = ‐2.2 ± 0.8) and zircon Lu-Hf (εHf i = 0.1 ± 1.1) are robust and support mantle derivation of the magmas. Geochemical modeling using experimentally derived partition coefficients was used to identify possible causes of enrichment in incompatible elements through metasomatism in the mantle source region. Modeling of metasomatism by melts derived by partial melting of deeply subducted carbonated sediments approximates observed Mountain Pass Intrusive Suite trace element chemistry. Scattered εHf i in inherited zircon (2.8 ± 2.6) is consistent with derivation from an arc-related environment with substantial crustal contamination. Paleotectonic studies in the Mojave Province indicate that regional subduction preceded emplacement of the Mountain Pass Intrusive Suite by ∼300 Ma. Melting of the Mountain Pass source region may have been caused by post-collisional thermal relaxation and extension.

California↗

USGS2025

Critical Minerals in Ores (CMiO) database

Critical minerals are commodities essential to modern industrial and strategic technologies and are highly vulnerable to supply chain disruption. The Critical Minerals Mapping Initiative (CMMI) is a collaboration among the U.S. Geological Survey (USGS), the Geological Survey of Canada, and Geoscience Australia that aims to deepen global understanding of where critical minerals are located. A key output of this initiative is the Critical Minerals in Ores (CMiO) database that is advancing our collective understanding of critical minerals distributions. For instance, publicly available data on the concentrations of many critical minerals are sparse because these commodities can only be produced in small, yet essential, quantities compared to the primary commodities like copper and zinc. The CMiO database helps bridge this gap by offering high-quality, multielement geochemical data from a wide variety of critical mineral-bearing deposits around the world. Importantly, it uses a novel consensus deposit environment, group, and type classification scheme developed by the agencies that allows comparisons among ore deposits from different regions. The CMiO database contains geochemical data for more than 20,000 samples from more than 100 deposit types comprising 10 deposit environments.

Fact Sheet↗

USGS2000

Biodegradation of chlorinated ethenes at a karst site in middle Tennessee

This report presents results of field and laboratory investigations examining the biodegradation of chlorinated ethenes in a karst aquifer contaminated with trichloroethylene (TCE). The study site, located in Middle Tennessee, was selected because of the presence of TCE degradation byproducts in the karst aquifer and available site hydrologic and chlorinated-ethene information. Additional chemical, biological, and hydrologic data were gathered to evaluate whether the occurrence of TCE degradation byproducts in the karst aquifer was the result of biodegradation within the aquifer or simply transport into the aquifer. Geochemical analysis established that sulfate-reducing conditions, essential for reductive dechlorination of chlorinated solvents, existed in parts of the contaminated karst aquifer. Other areas of the aquifer fluctuated between anaerobic and aerobic conditions and contained compounds associated with cometabolism, such as ethane, methane, ammonia, and dissolved oxygen. A large, diverse bacteria population inhabits the contaminated aquifer. Bacteria known to biodegrade TCE and other chlorinated solvents, such as sulfate-reducers, methanotrophs, and ammonia-oxidizers, were identified from karst-aquifer water using the RNA-hybridization technique. Results from microcosms using raw karst-aquifer water found that aerobic cometabolism and anaerobic reductive-dechlorination degradation processes were possible when appropriate conditions were established in the microcosms. These chemical and biological results provide circumstantial evidence that several biodegradation processes are active in the aquifer. Additional site hydrologic information was developed to determine if appropriate conditions persist long enough in the karst aquifer for these biodegradation processes to be significant. Continuous monitoring devices placed in four wells during the spring of 1998 indicated that pH, specific conductance, dissolved oxygen, and oxidation-reduction potentials changed very little in areas isolated from active ground-water flow paths. These stable areas in the karst aquifer had geochemical conditions and bacteria conducive to reductive dechlorination of chlorinated ethenes. Other areas of the karst aquifer were associated with active ground-water flow paths and fluctuated between anaerobic and aerobic conditions in response to rain events. Associated with this dynamic environment were bacteria and geochemical conditions conducive to cometabolism. In summary, multiple lines of evidence developed from chemical, biological, and hydrologic data demonstrate that a variety of biodegradation processes are active in this karst aquifer.

Tennessee↗

USGS2025

Review: The hydrogeology of critical mineral resources relevant to the energy transition

Attaining the goals of the international treaty on climate change (the Paris Agreement) will greatly increase the demand for the critical minerals required to implement clean-energy technologies. This poses both challenges and opportunities to the hydrogeologic community from several perspectives. Here, important insights that the hydrogeological sciences have to offer for mineral exploration, mineral production, and addressing environmental issues related to mining and mine decommissioning are summarized. This study focuses on copper, cobalt, lithium, and rare earths to represent the broad spectrum of critical minerals and illustrate their relevance by referring to projected demands and production rates. The current understanding of the hydrogeologic processes that form major deposits of these minerals are then summarized. Ore is defined as the naturally occurring material from which minerals of economic value can be extracted, where most ore deposits are the products of complex hydrogeologic couplings between fluid flow, heat transport, solute transport, chemical reactions, and mechanical deformation. Exploration models for the discovery of deeper, hidden deposits are potentially informed by hydrogeologic theory and hydrogeochemical processes. Hydrogeologic understanding and methods are also essential to production and recovery. Longstanding challenges are mine dewatering and (conversely) mine water supply, as well as mineral-extraction practices such as spoil heap leaching and in situ mining. New challenges arise from element extraction from subsurface brines. Finally, the quantity of water use and potential environmental impacts of mining on water quality are at the core of ‘social license’: the approval and acceptance of society to mining activities.

Hydrogeology Journal↗

USGS2026

Deaf, deafblind, and hard of hearing university student experiences with earthquake early warning in the United States: Evaluating language planning and technology access

The growing literature on deaf and hard of hearing (DHH+) populations and disasters demonstrates that emergency communication (including alerts) is not reaching global DHH + individuals with dangerous impacts for morbidity and mortality. This is the first research study in the U.S. to qualitatively explore the experiences of DHH + persons with earthquake early warning (EEW) through group-based dialogue sessions. The study investigates eight DHH + university students'past earthquake experiences, access to EEW alerts, and perceptions of ShakeAlert Ⓡ , an EEW system for detecting earthquakes and alerting residents of California, Oregon, and Washington. Findings highlight key gaps in disaster alert usability within four thematic areas: lack of messaging in participants' language(s), unclear alert messaging, deficient message delivery mechanisms for deafblind persons, and insufficient access to earthquake information and training that leads to dependence on informal information networks. Weaknesses identified in these four themes reduce DHH + trust in EEW systems and compromise the capacity of alert recipients to take swift protective action or to mentally prepare before shaking starts. The study also underscores structural factors such as insufficient linguistic representation in disaster language planning and technology design, which ignores the linguistic and sensory access needs of DHH + individuals. Building on disaster language planning frameworks, we recommend involving DHH + populations to co-develop EEW alerts. By centering DHH + perspectives, this research contributes to ongoing efforts to ensure that EEW systems reach everyone.

California↗

USGS2025

Ecohydrological response of a forested headwater catchment to a flash drought in the Southeastern U.S.

Flash droughts differ from traditionally defined droughts in their rapidity of intensification and often associated high vapor-pressure deficit. These droughts can lead to declines in streamflow and water table depth and induce water stress to vegetation at a greater rate than droughts that manifest over longer periods. However, little is known regarding the response of forested environments to flash drought because most studies of impacts have been conducted in agricultural settings. In this study we investigated water-use patterns of riparian trees using sap flow methods and examined the role of groundwater as a source of moisture over three periods that were delimited by antecedent soil moisture conditions. For a longer-term perspective we also examine monthly streamflow over the 35-year record. We observed that trees at only one monitoring plot showed a decrease in water use relative to evaporative demand during a flash drought. Total reverse sap flow (flow toward the roots rather than the canopy) greatly increased during the flash drought period, suggesting the likely occurrence of hydraulic redistribution to the excessively dry soils. Over the drought period groundwater became a more dominant source of moisture for sustaining forest water use. Monthly mean streamflow during the flash drought approached levels observed in past multiyear droughts. This is the first study, to our knowledge, to specifically investigate the response of multiple water budget components to flash drought in a humid forest. As more studies are conducted, a better understanding of the range of expected responses are likely to emerge.

Georgia↗

USGS2025

Drone-based radiometric surveys provide high-resolution mine waste characterization

Airborne radiometric surveys use passive geophysical techniques to characterize geochemical variations at or near earth’s surface. These methods have been used for a variety of mapping applications, including mineral resource evaluation. However, detailed characterization of smaller geologic targets, including mine waste features, requires flying at lower altitudes and with tighter line spacing than is feasible with traditional aircraft. Here, a small uncrewed aircraft system (sUAS) equipped with a radiometric sensor was used to acquire high-resolution gamma-spectrometry over small mine waste features and a low-grade stockpile in southwestern New Mexico. The sUAS radiometric system mapped local variability within each survey area and revealed ~2–10 m wide zones where radioelements K, Th, and U may be elevated 2–10× the surrounding material. Additionally, the sUAS radiometric data revealed radioelement variability across survey sites, which correlated reasonably well with variability seen in geochemical samples at each survey site, even though samples collected from individual sites showed high local variability. The sUAS data characterized local heterogeneity within mine waste and other small geologic targets at scales of a few meters to tens of meters, which is not possible with traditional crewed aircraft, and with continuity of coverage that is not possible with ground surveys, thus filling a key gap in geophysical survey spatial resolution.

New Mexico↗

USGS2025

VIPER site analysis

We needed to evaluate available orbital data of NASA’s Volatiles Investigating Polar Exploration Rover (VIPER) mission area in order to derive a variety of maps to help the science team identify scientifically interesting places for the rover to visit and to provide scientific context for our mission. Some of these maps also fulfilled engineering and mission design needs to enable safe and efficient landing and roving. We incorporated data from the Lunar Reconnaissance Orbiter Camera, the Lunar Orbital Laser Altimeter, the Mini-RF instrument, the Chandrayaan-2 Orbital High Resolution Camera, the Korean Pathfinder Lunar Orbiter’s Shadowcam, the Kaguya Spectral Profiler and Multiband Imager, and the Chandrayaan-1 Moon Mineralogy Mapper. We used a variety of techniques to build these maps, including stereogrammetry, shape-from-shading, ice stability depth and surface temperature calculations, and the horizon method for solar illumination and direct-to-Earth communications maps. Altogether, these maps allowed us to survey for boulders, evaluate features in permanently shadowed regions that VIPER might explore, provide mineralogic context for what VIPER’s instruments may learn, estimate the ages and radar properties of craters in the VIPER mission area, and evaluate the potential for gravity traverses with the rover. These data and techniques provided a rich set of information from which both the VIPER science team and engineering teams were able to draw in order to plan a safe landing and to plan a VIPER surface mission that will be both scientifically valuable and robust from an operational perspective.

The Planetary Science Journal↗