Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Northwest Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69Linked to original sources

Geologic map of pre-Middle Jurassic basement rocks beneath the Atlantic and Gulf Coastal Plains in Florida

Much of the southeastern United States, including all of Florida, is covered by flat-lying sedimentary strata of the Atlantic and Gulf Coastal Plains which have accumulated since Middle Jurassic time. The pre-Middle Jurassic rocks that underlie these coastal plains in Florida, here collectively referred to as “basement,” are known only from a relatively small number of boreholes. This scientific investigations map presents an interpretation of the basement geology in a 1:1,000,000-scale subsurface geologic map with supporting text, data, and figures. The subsurface mapping methodology integrates petrographic, geochronological, thermochronological, geochemical, and mineralogical analyses of drill cores and cuttings in the context of regional geophysical data. The pre-Middle Jurassic rocks of Florida consist of the Gondwanan (West African) Suwannee terrane which was accreted to Laurentia during the Alleghanian orogeny and subsequently intruded by Permian granites, superposed by early Mesozoic rift basins, and partially overlain by bimodal Jurassic volcanic rocks. The younger basement components, specifically the Southwest Florida volcanic province, North Florida tholeiites, early Mesozoic rift basins, and Alleghanian granitoids, have correlative and contemporaneous units throughout the Appalachian orogen. In contrast, Florida’s older basement rocks, including Paleozoic siliciclastic strata of the Suwannee basin, North Florida volcanic series, Osceola and Gaskin intrusive complexes, and the St. Lucie Metamorphic Complex, have neither surface exposures nor unequivocal correlates. Major structures include early Mesozoic normal faults and northwest-striking transfer zones such as the Jay fault. Many of these faults define the boundaries of subbasins within the South Georgia rift system. Top-of-basement structure contours show gentle arches and embayments that are also recognized in overlying coastal plain strata.

Florida↗

U.S. Geological Survey Karst Interest Group Proceedings, Fayetteville, Arkansas, April 26-29, 2011

Karst aquifer systems are present throughout parts of the United States and some of its territories and are developed in carbonate rocks (primarily limestone and dolomite) that span the entire geologic time frame. The depositional environments, diagenetic processes, and post-depositional tectonic events that form carbonate rock aquifers are varied and complex, involving both biological and physical processes that can influence the development of permeability. These factors, combined with the diverse climatic regimes under which karst development in these rocks has taken place result in the unique dual or triple porosity nature of karst aquifers. These complex hydrologic systems often present challenges to scientists attempting to study groundwater flow and contaminant transport. The concept for developing a Karst Interest Group evolved from the November 1999 National Groundwater Meeting of the U.S. Geological Survey (USGS), Water Resources Division. As a result, the Karst Interest Group was formed in 2000. The Karst Interest Group is a loose-knit grass-roots organization of USGS employees devoted to fostering better communication among scientists working on, or interested in, karst hydrology studies. The mission of the Karst Interest Group is to encourage and support interdisciplinary collaboration and technology transfer among USGS scientists working in karst areas. Additionally, the Karst Interest Group encourages cooperative studies between the different disciplines of the USGS and other Federal agencies, and university researchers or research institutes. This fifth workshop is a joint workshop of the USGS Karst Interest Group and University of Arkansas HydroDays workshop, sponsored by the USGS, the Department of Geosciences at the University of Arkansas in Fayetteville. Additional sponsors are: the National Cave and Karst Research Institute, the Edwards Aquifer Authority, San Antonio, Texas, and Beaver Water District, northwest Arkansas. The majority of funding for the proceedings preparation and workshop was provided by the USGS Groundwater Resources Program, National Cooperative Mapping Program, and the Regional Executives of the Northeast, Southeast, Midwest, South Central and Rocky Mountain Areas. The University of Arkansas provided the rooms and facilities for the technical and poster presentations of the workshop, vans for the field trips, and sponsored the HydroDays banquet at the Savoy Experimental Watershed on Wednesday after the technical sessions.

Scientific Investigations Report↗

Geologic map of the Ennis 30' x 60' quadrangle, Madison and Gallatin Counties, Montana, and Park County, Wyoming

The Ennis 1:100,000 quadrangle lies within both the Laramide (Late Cretaceous to early Tertiary) foreland province of southwestern Montana and the northeastern margin of the middle to late Tertiary Basin and Range province. The oldest rocks in the quadrangle are Archean high-grade gneiss, and granitic to ultramafic intrusive rocks that are as old as about 3.0 Ga. The gneiss includes a supracrustal assemblage of quartz-feldspar gneiss, amphibolite, quartzite, and biotite schist and gneiss. The basement rocks are overlain by a platform sequence of sedimentary rocks as old as Cambrian Flathead Quartzite and as young as Upper Cretaceous Livingston Group sandstones, shales, and volcanic rocks. The Archean crystalline rocks crop out in the cores of large basement uplifts, most notably the 'Madison-Gravelly arch' that includes parts of the present Tobacco Root Mountains and the Gravelly, Madison, and Gallatin Ranges. These basement uplifts or blocks were thrust westward during the Laramide orogeny over rocks as young as Upper Cretaceous. The thrusts are now exposed in the quadrangle along the western flanks of the Gravelly and Madison Ranges (the Greenhorn thrust and the Hilgard fault system, respectively). Simultaneous with the west-directed thrusting, northwest-striking, northeast-side-up reverse faults formed a parallel set across southwestern Montana; the largest of these is the Spanish Peaks fault, which cuts prominently across the Ennis quadrangle. Beginning in late Eocene time, extensive volcanism of the Absorka Volcanic Supergroup covered large parts of the area; large remnants of the volcanic field remain in the eastern part of the quadrangle. The volcanism was concurrent with, and followed by, middle Tertiary extension. During this time, the axial zone of the 'Madison-Gravelly arch,' a large Laramide uplift, collapsed, forming the Madison Valley, structurally a complex down-to-the-east half graben. Basin deposits as thick as 4,500 m filled the graben. Pleistocene glaciers sculpted the high peaks of the mountain ranges and formed the present rugged topography.

IMAP↗

Seismicity of the Earth 1900–2010 Middle East and vicinity

No fewer than four major tectonic plates (Arabia, Eurasia, India, and Africa) and one smaller tectonic block (Anatolia) are responsible for seismicity and tectonics in the Middle East and surrounding region. Geologic development of the region is a consequence of a number of first-order plate tectonic processes that include subduction, large-scale transform faulting, compressional mountain building, and crustal extension. In the east, tectonics are dominated by the collision of the India plate with Eurasia, driving the uplift of the Himalaya, Karakorum, Pamir and Hindu Kush mountain ranges. Beneath the Pamir‒Hindu Kush Mountains of northern Afghanistan, earthquakes occur to depths as great as 200 km as a result of remnant lithospheric subduction. Along the western margin of the India plate, relative motions between India and Eurasia are accommodated by strike-slip, reverse, and oblique-slip faulting, resulting in the complex Sulaiman Range fold and thrust belt, and the major translational Chaman Fault in Afghanistan. Off the south coasts of Pakistan and Iran, the Makran trench is the surface expression of active subduction of the Arabia plate beneath Eurasia. Northwest of this subduction zone, collision between the two plates forms the approximately 1,500-km-long fold and thrust belts of the Zagros Mountains, which cross the whole of western Iran and extend into northeastern Iraq. Tectonics in the eastern Mediterranean region are dominated by complex interactions between the Africa, Arabia, and Eurasia plates, and the Anatolia block. Dominant structures in this region include: the Red Sea Rift, the spreading center between the Africa and Arabia plates; the Dead Sea Transform, a major strike-slip fault, also accommodating Africa-Arabia relative motions; the North Anatolia Fault, a right-lateral strike-slip structure in northern Turkey accommodating much of the translational motion of the Anatolia block westwards with respect to Eurasia and Africa; and the Cyprian Arc, a convergent boundary between the Africa plate to the south, and Anatolia Block to the north.

Open-File Report↗

Characterizing Meteor Crater impact melts through geochemistry and textural analysis

The U.S. Geological Survey Astrogeology Science Center houses the Meteor Crater sample collection, an assemblage of over 2,500 meters of cuttings from 161 drill holes into Meteor Crater’s rim, flanks, and ejecta blanket. We have utilized this unique collection to study the composition and spatial distribution of impact-generated materials from within the ejecta blanket. Meteor Crater has historically been known to have generated only a relatively small amount of impact melt compared to other terrestrial craters of similar size. A detailed compositional and textural dataset of impact-derived melts from this impact can therefore be a useful asset in improving our understanding of crater formation, and in particular impact melt formation. We have characterized 42 impact-melt particles from Meteor Crater using a scanning electron microscope and an electron microprobe for textural and compositional analysis. We analyzed samples from six drill holes in the ejecta blanket, situated to the northwest, southeast, south, and southwest of the crater (ejecta northeast of the crater is devoid of impact melts). Impact melts were collected from drill cuttings at various depths within the ejecta blanket, ranging from a few centimeters below the surface down to ~6.5 meters. Backscattered electron (BSE) images were acquired for each analyzed impact-melt particle. To characterize the various textures and phases present in each impact melt, we also took many detailed BSE images. Our geochemical analyses include full spectral profiles using energy dispersive X-ray spectrometry and well-calibrated wavelength dispersive spectrometry for a number of phases, including minerals (olivine, pyroxene, and so on), pristine glass, and metallic inclusions. The full dataset is available in ScienceBase as a data release (Gullikson and others, 2024), accessible at https://doi.org/10.5066/P9OGAJ8P . Our goal for this Open-File Report is to provide a summary of this immense dataset, details on data collection, descriptions of the different phases observed within impact-melt particles (both geochemically and texturally), and observable trends.

Arizona↗

Late Quaternary stratigraphy and depositional history of the Long Island Sound basin

The stratigraphy of Late Quaternary geologic units beneath Long Island Sound (LIS) is interpreted from 3,500 km of high-resolution, seismic-reflection profiles supplemented by vibracore data. Knowledge gained from onshore regional geologic studies and previous offshore investigations is also incorporated in these interpretations. Glacial deposits overlie and nearly fill an Inner Lowland which is floored by crystalline rocks in the north and bounded to the south by an irregular, north-facing cuesta scarp in Cretaceous Coastal-Plain strata. The thick glacial section consists largely of sediment that was deposited in glacial Lake Connecticut during the retreat of the last (late Wisconsin) ice sheet. Ice-marginal lacustrine fan deposits and submerged extensions of the southeastern Connecticut recessional moraines mark positions of the ice margin during systematic northward retreat. When the ice margin stood at positions just north of the present shoreline of Connecticut (17.6-16.5 ka), glacial Lake Connecticut was slightly larger than Long Island Sound is today. Ice-marginal deltas and near-ice marginal fluviodeltaic deposits occur along coastal Connecticut. Delta-building was diachronous; progressively younger deltas record northwesterly retreat of the ice margin and lowering lake levels. Distally from the deltas, varied lake-clays (up to 150 m thick) drape the underlying topography. The lake spillway cut across the Harbor Hill-Roanoke Point-Fishers Island-Charlestown end moraine at its lowest point just west of Fishers Island (The Race). Lake levels fell as the spillway notch was erosionally deepened, and gradually the lakebed became subaerially exposed. A largely preserved channel system cuts the lake-deposit surface; fluvial channel-fill sediments are overlain by estuarine sediments in the channel system. Perhaps as early as 15 ka, but no later than 13 ka, the sea entered the Basin through the channel at The Race and quickly transgressed westward via the lakebed channel system. As the sea rose further and spread throughout the Basin, a wave-cut surface was formed. Extensive marine deltaic deposits, up to 40 m thick, overlie the wave-cut marine unconformity in the east-central part of the Basin. These sediments were derived from erosion of the drained bed of Lake Hitchcock, in the Connecticut valley to the north, and were deposited in a -40-m relative sea at about 12.4 ka. Where quiet waters prevail, marine mud generally less than 15 m thick blankets the older deposits of the Basin. Elsewhere, especially in eastern LIS, tidal currents are actively reworking and transporting glacial and postglacial deposits.

Connecticut, New York↗

Geologic map of the Sunshine 7.5' quadrangle, Taos County, New Mexico

The Sunshine 7.5' quadrangle is located in the south-central part of the San Luis Basin of northern New Mexico, in the Rio Grande del Norte National Monument, and contains deposits that record volcanic, tectonic, and associated alluvial and colluvial processes over the past four million years. Sunshine Valley, named for the small locale of Sunshine, is incised by a series of northeast-trending drainages cut into Tertiary and Quaternary alluvial deposits forming an extensive alluvial apron between the east flank of the Sangre de Cristo Mountains and the Rio Grande. These deposits predominantly overlie gently eastward-dipping lava flows of Pliocene Servilleta Basalt erupted from centers west of the map area. Servilleta Basalt lava flows terminate to the south against the elevated topography of three volcanic centers of the Taos Plateau volcanic field. From west to east these are Cerro de la Olla, Cerro Chiflo, and Guadalupe Mountain that are exposed in the southern part of the map area. Remnants of Miocene volcanic rocks are exposed near the southwestern edge of the map area and record evidence of an eroded volcanic terrain underlying deposits of the Taos Plateau volcanic field. These deposits are likely fault bounded to the east, roughly coincident with north to northwest trending, down-to-east faults in the southwestern quarter of the map area. The down-to-east normal faults reflect the basinward migration of the western margin of the Sunshine Valley sub-basin of the southern San Luis Basin. Pliocene and younger basin deposition was accommodated along predominantly north-trending fault-bounded grabens and is preserved as poorly exposed fault scarps that cut lava flows of Ute Mountain volcano, north of the map area. The Servilleta Basalt and younger surficial deposits record largely down-to-east basinward displacement. Faults are identified with varying confidence levels in the map area. Recognizing and mapping faults developed near the surface in relatively young, brittle volcanic rocks is difficult because: (1) they tend to form fractured zones tens of meters wide rather than discrete fault planes, (2) the relative youth of the deposits has resulted in only modest displacements on most faults, and (3) some of the faults may have significant strike-slip components that do not result in large vertical offsets that are readily apparent in offset of sub-horizontal contacts. Those faults characterized as “certain” either have distinct offset of map units or had slip planes that were directly observed in the field. Lineaments defined from magnetic anomalies form an additional constraint on potential fault locations.

New Mexico↗

Eocene total petroleum system — North and East of the Eocene West Side Fold Belt Assessment Unit of the San Joaquin Basin Province

The North and East of Eocene West Side Fold Belt Assessment Unit (AU) of the Eocene Total Petroleum System of the San Joaquin Basin Province comprises all hydrocarbon accumulations within the geographic and stratigraphic limits of this confirmed AU. Oil and associated gas accumulations occur in Paleocene through early middle Miocene marine to nonmarine sandstones found on the comparatively stable northeast shelf of the basin. The assessment unit is located north and east of the thickest accumulation of Neogene sediments and the west side fold belt. The area enclosed by the AU has been affected by only mild deformation since Eocene time. Traps containing known accumulations are mostly low-relief domes, anticlines, and up-dip basin margin traps with faulting and stratigraphic components. Map boundaries of the assessment unit are shown in figures 19.1 and 19.2; this assessment unit replaces the Northeast Shelf of Neogene Basin play 1006, the East Central Basin and Slope North of Bakersfield Arch play 1010, and part of the West Side Fold Belt Sourced by Pre-middle Miocene Rocks play 1005 considered by the U.S. Geological Survey (USGS) in their 1995 National Assessment (Beyer, 1996). Stratigraphically, the AU includes rocks from the uppermost crystalline basement to the topographic surface. In the region of overlap with the Central Basin Monterey Diagenetic Traps Assessment Unit, the North and East of Eocene West Side Fold Belt AU extends from basement rocks to the top of the Temblor Formation (figs. 19.3 and 19.4). In map view, the northern boundary of the assessment unit corresponds to the northernmost extent of Eocene-age Kreyenhagen Formation. The northeast boundary is the eastern limit of possible oil reservoir rocks near the eastern edge of the basin. The southeast boundary corresponds to the pinch-out of Stevens sand of Eckis (1940) to the south, which approximately coincides with the northern flank of the Bakersfield Arch (fig. 19.1). The AU is bounded on the southwest by the limit of major west side structural deformation and to the northwest by the San Andreas Fault and the limit of hydrocarbon-prospective strata in the Coast Ranges. As described by Gautier and others (this volume, chapter 2), existing oil fields in the San Joaquin Basin Province were assigned to assessment units based on the identified petroleum system and reservoir rocks in each field. Vallecitos oil field in the extreme northwest corner of the basin was assigned to the Eocene Total Petroleum System, because oil analyses conducted for this San Joaquin Basin assessment indicate that Eocene oil charged the reservoir rocks (Lillis and Magoon, this volume, chapter 9). Some literature classifies the Vallecitos oil field as part of the northernmost fold of the basin’s west side fold belt (see, for example, Rentschler, 1985; Bartow, 1991), but because of the oil field’s spatial separation and differing trend from the west side fold belt, Vallecitos field was considered here to be within the North and East of Eocene West Side Fold Belt Assessment Unit rather than in the other assessment unit in the Eocene Total Petroleum System, the Eocene West Side Fold Belt. Primary fields in the assessment unit are defined as those containing hydrocarbon resources greater than the USGS minimum threshold for assessment (0.5 million barrels of oil); secondary fields contain smaller volumes of oil but constitute a significant show of hydrocarbons.

California↗

Geology and ore deposits of the Uncompahgre (Ouray) Mining District, Southwestern Colorado

The Uncompahgre mining district, part of the Ouray mining district, includes an area of about 15 mi 2 on the northwestern flank of the San Juan Mountains in southwestern Colorado from which ores of gold, silver, copper, lead, and zinc have had a gross value of $14 to 15 million. Bedrock within the district ranges in age from Proterozoic to Cenozoic. At least three major uplifts of the ancestral San Juan Mountains occurred during the Proterozoic and at the close of the Paleozoic and Mesozoic, respectively. The last event, known as the Laramide orogeny, locally was accompanied by extensive intrusion of igneous rocks. The principal ore deposits of the district were associated with crosscutting and laccolithic intrusions of porphyritic granodiorite formed during the Laramide orogeny. The ores were deposited chiefly in Paleozoic and Mesozoic sedimentary strata. Ore deposits range from low-grade, contact-metamorphic through pyritic base-metal bodies containing silver and gold tellurides and native gold to silver-bearing lead-zinc deposits. Ore deposition was largely controlled by structural trends and axes of uplift established during Paleozoic deformation, and also in part by structural lines established during the Proterozoic. There are two main structural axes in the district: (1) a north-northwest-trending axis of uplift, called the Uncompahgre axis, and (2) an intrusive axis of northeastward trend. The two axes intersect near the center of eruptive activity and divide the district into four structural sectors. Sources of the ore-forming fluids lie along the northeast-trending intrusive zone and appear to be related genetically to the igneous rocks. Contact-metamorphic deposits and most of the pyritic gold-bearing deposits were found in the central parts of the district. The silver-lead-zinc deposits were found chiefly in the northern and southern sectors of the district. Ore deposition was controlled by nearness to the intrusive contacts, nearness to zones of shallow tensional fractures, and other factors. The largest and highest grade deposits were either mostly developed or nearly exhausted at the time of our studies; they occurred in a zone near the Uncompahgre axis.

Colorado↗

Origin and paleoclimatic significance of late Quaternary loess in Nebraska: Evidence from stratigraphy, chronology, sedimentology, and geochemistry

Loess is one of the most extensive surficial geologic deposits in midcontinental North America, particularly in the central Great Plains region of Nebraska. Last-glacial-age loess (Peoria Loess) reaches its greatest known thickness in the world in this area. New stratigraphic, geochronologic, mineralogic, and geochemical data yield information about the age and provenance of Peoria Loess, as well as evaluation of recent climate models. Sixteen new radiocarbon ages and recently acquired optically stimulated luminescence ages indicate that Peoria Loess deposition in Nebraska occurred between ca. 25,000 cal yr B.P. and ca. 13,000 cal yr B.P. After ca. 13,000 cal yr B.P. a period of pedogenesis began, represented by the dark, prominent Brady Soil. At some localities, further loess deposition was minimal. At other localities, sometime after ca. 11,000 cal yr B.P., there were additional episodes of loess deposition (Bignell Loess) intermittently throughout the Holocene. The spatial variability of particle size abundances in Peoria Loess shows a northwest-to-southeast fining in Nebraska, consistent with maps of previous workers that show a northwest-to-southeast thinning of loess. These observations indicate that paleowinds that deposited the loess were from the west or northwest and that the source or sources of Peoria Loess lay to the west or northwest. New mineralogical and geochemical data indicate that the most important sources of loess were likely Tertiary siltstones of the White River and Arikaree Groups, silt facies of Pliocene eolian sediments, and small contributions from Pierre Shale. It is likely that fine-grained silts were transported episodically through the Nebraska Sand Hills from Tertiary and Cretaceous bedrock sources to the north, in agreement with a model presented recently. The identification of Tertiary siltstones and silts as the primary sources of loess is consistent with isotopic data presented in a companion paper. Contributions of glaciogenic silt from the Platte and Missouri Rivers were limited to loess zones close to the valleys of those drainages. An earlier computer-based model of global dust generation during the last glacial period did not identify the Great Plains of North America as a significant source of nonglaciogenic eolian silt. However, a refined version of this model does simulate this region as a significant non-glacial dust source during the last glacial period, in good agreement with the results presented here.

Nebraska↗

Revised geologic cross sections of parts of the Colorado, White River, and Death Valley regional groundwater flow systems, Nevada, Utah, and Arizona

This report presents revisions to parts of seven of the ten cross sections originally published in U.S. Geological Survey Open-File Report 2006-1040. The revisions were necessary to correct errors in some of the original cross sections, and to show new parts of several sections that were extended and (or) appended to the original section profiles. Revisions were made to cross sections C-C', D-D', E-E', F-F', G-G', I-I', and J-J', and the parts of the sections revised or extended are highlighted below the sections on plate 1 by red brackets and the word "revised," or "extended." Sections not listed above, as well as the interpretive text and figures, are generally unchanged from the original report. Cross section C-C' includes revisions in the east Mormon Mountains in the east part of the section; D-D' includes revisions in the Mormon Mesa area in the east part of the section; E-E' includes revisions in the Muddy Mountains in the east part of the section; F-F' includes revisions from the Muddy Mountains to the south Virgin Mountains in the east part of the section; and J-J' includes some revisions from the east Mormon Mountains to the Virgin Mountains. The east end of G-G' was extended about 16 km from the Black Mountains to the southern Virgin Mountains, and the northern end of I-I' was extended about 45 km from the Muddy Mountains to the Mormon Mountains, and revisions were made in the Muddy Mountains part of the original section. This report contains 10 interpretive cross sections and an integrated text describing the geology of parts of the Colorado, White River, and Death Valley regional groundwater flow systems in Nevada, Utah, and Arizona. The primary purpose of the report is to provide geologic framework data for input into a numerical groundwater model. Therefore, the stratigraphic and structural summaries are written in a hydrogeologic context. The oldest rocks (basement) are Early Proterozoic metamorphic and intrusive crystalline rocks that are considered confining units because of their low permeability. Late Proterozoic to Lower Cambrian clastic units overlie the crystalline rocks and are also considered confining units within the regional flow systems. Above the clastic units are Middle Cambrian to Lower Permian carbonate rocks that are the primary aquifers in the flow systems. The Middle Cambrian to Lower Permian carbonate rocks are overlain by a sequence of mainly clastic rocks of late Paleozoic to Mesozoic age that are mostly considered confining units, but they may be permeable where faulted. Tertiary volcanic and plutonic rocks are exposed in the northern and southern parts of the study area. In the Clover and Delamar Mountains, these rocks are highly deformed by north- and northwest-striking normal and strike-slip faults that are probably important conduits in transmitting groundwater from the basins in the northern Colorado and White River flow systems to basins in the southern part of the flow systems. The youngest rocks in the region are Tertiary to Quaternary basin-fill deposits. These rocks consist of middle to late Tertiary sediments consisting of limestone, conglomerate, sandstone, tuff, and gypsum, and younger Quaternary surficial units consisting of alluvium, colluvium, playa deposits, and eolian deposits. Basin-fill deposits are both aquifers and aquitards. The rocks in the study area were complexly deformed by episodes of Mesozoic compression and Cenozoic extensional tectonism. Some Cretaceous thrust faults and folds of the Sevier orogenic belt form duplex zones and define areas of maximum thickness for the Paleozoic carbonate rocks. Cenozoic faults are important because they are the primary structures that control groundwater flow in the regional flow systems.

Arizona, Nevada, Utah↗

Geologic map of the San Antonio Mountain area, northern New Mexico and southern Colorado

The geologic map of the San Antonio Mountain area in northern New Mexico and southern Colorado is located along the west-central part of the San Luis Valley. The San Luis Valley is the geomorphic expression of the San Luis Basin, an extensional basin associated with the northern Rio Grande rift. Deposits within the map area record volcanic, sedimentary, and tectonic processes over the last ~33 million years. Oldest exposed deposits include Oligocene volcanic rocks associated with the southeast San Juan Mountains locus of volcanism within the Southern Rocky Mountains volcanic field. Overlying deposits of the Southern Rocky Mountains volcanic field are volcaniclastic sedimentary rocks interbedded with predominantly basaltic lava flows of Oligocene to Miocene age. Basalt to rhyolite volcanic rocks of the Pliocene to Pleistocene Taos Plateau volcanic field unconformably overlie Oligocene to Miocene volcanic and sedimentary deposits. Superposed on the Tertiary deposits are Pleistocene to Holocene alluvial and colluvial deposits. North- to northwest-trending faults displace rocks within the map area. Magnitude of deformation is broadly correlative with age of the deposits inasmuch as Oligocene to Miocene rocks display a greater degree of fault displacement and east tilting than Pliocene volcanic rocks. Within the map area, faults displace Oligocene to Miocene deposits 10–30 meters with generally down-to-west offset, and the units dip eastward 3–7 degrees. Pliocene volcanic rocks exhibit shallower eastward dips inferred primarily from the slope of upper lava flow surfaces that dip eastward from 1–3 degrees and lava flows are generally displaced less than 5 meters.

Colorado, New Mexico↗

Hydrogeology and simulation of groundwater flow and land-surface subsidence in the northern part of the Gulf Coast aquifer system, Texas, 1891-2009

In cooperation with the Harris–Galveston Subsidence District, Fort Bend Subsidence District, and Lone Star Groundwater Conservation District, the U.S. Geological Survey developed and calibrated the Houston Area Groundwater Model (HAGM), which simulates groundwater flow and land-surface subsidence in the northern part of the Gulf Coast aquifer system in Texas from predevelopment (before 1891) through 2009. Withdrawal of groundwater since development of the aquifer system has resulted in potentiometric surface (hydraulic head, or head) declines in the Gulf Coast aquifer system and land-surface subsidence (primarily in the Houston area) from depressurization and compaction of clay layers interbedded in the aquifer sediments. The MODFLOW-2000 groundwater flow model described in this report comprises four layers, one for each of the hydrogeologic units of the aquifer system except the Catahoula confining system, the assumed no-flow base of the system. The HAGM is composed of 137 rows and 245 columns of 1-square-mile grid cells with lateral no-flow boundaries at the extent of each hydrogeologic unit to the northwest, at groundwater divides associated with large rivers to the southwest and northeast, and at the downdip limit of freshwater to the southeast. The model was calibrated within the specified criteria by using trial-and-error adjustment of selected model-input data in a series of transient simulations until the model output (potentiometric surfaces, land-surface subsidence, and selected water-budget components) acceptably reproduced field measured (or estimated) aquifer responses including water level and subsidence. The HAGM-simulated subsidence generally compared well to 26 Predictions Relating Effective Stress to Subsidence (PRESS) models in Harris, Galveston, and Fort Bend Counties. Simulated HAGM results indicate that as much as 10 feet (ft) of subsidence has occurred in southeastern Harris County. Measured subsidence and model results indicate that a larger geographic area encompassing this area of maximum subsidence and much of central to southeastern Harris County has subsided at least 6 ft. For the western part of the study area, the HAGM simulated as much as 3 ft of subsidence in Wharton, Jackson, and Matagorda Counties. For the eastern part of the study area, the HAGM simulated as much as 3 ft of subsidence at the boundary of Hardin and Jasper Counties. Additionally, in the southeastern part of the study area in Orange County, the HAGM simulated as much as 3 ft of subsidence. Measured subsidence for these areas in the western and eastern parts of the HAGM has not been documented.

Texas↗

Ground-water supplies of the Ypsilanti area, Michigan

As of the date of this report (August 1945), the major water users in the Ypsilanti area are: (1) the city of Ypsilanti, (2) the Willow Run bomber plant, built by the Federal Government and operated by the Ford Motor Co., and (3) the war housing project of the Federal Public Housing Authority, designated in this report the Willow Run Townsite. The city, bomber plant, and townsite have required large quantities of water for domestic and industrial uses, and the necessary water supplies have been developed from wells. The Federal Works Agency had the responsibility of deciding whether the existing water facilities were adequate to meet the expected demands and determining the character of any additional public water-supply facilities that might be constructed with Federal assistance. In order to appraise the ground-water resources of the area the Federal Works Agency requested the Geological Survey to investigate the adequacy of the existing supplies and the availability of additional water. The present report is the result of the investigation, which was made in cooperation with the Michigan Geological Survey Division. The water supplies of the three major users are obtained from wells penetrating glacial and associated sands and gravels. Supplies for the city of Ypsilanti and the Willow Run bomber plant are obtained from wells in the valley of the Huron River; the supply for the Willow Run Townsite is obtained from wells penetrating glacial gravels underlying the upland northeast of the valley. The bedrock formations of the area either yield little water to wells or yield water that is too highly mineralized for most uses. The water supply for the bomber plant is obtained from three closely spaced, highly productive wells at the northern edge of the Huron River, a little more than 3 miles southeast of Ypsilanti. The water receives complete treatment in a modern treatment plant. River water also can be treated and has been used occasionally in the winter and spring. The average daily pumpage during periods of maximum production at the bomber plant has been 4.5 to 4.75 million gallons. On June 30, 1945, production of bombers was suspended, and the plant went on a. maintenance basis. The water supply of the bomber-plant well field is replenished by recharge from precipitation and from the Huron River. The evidence shows that recharge from the river is one of the principal sources of water and gives assurance both of the adequacy of the present supply and of the availability of additional water if needed. The safe yield of the three existing wells is estimated to be not less than 6 million gallons per day. The Ypsilanti public water supply is obtained from three tubular wells drilled in 1943, which replaced a number of suction-pumped tubular wells and one large dug well. All the wells penetrate sand and gravel in the bend of the Huron River in the southeastern part of Ypsilanti. The water is treated in a modern treatment plant completed in 1939. The average daily pumpage in million gallons was about 1.68 in 1942, 1.70 in 1943, and 1.66 in 1944. Considerable water was furnished to the Willow Run bomber plant from the Ypsilanti public-supply system during the period from August 1941 through March 1943. The available information indicates that the water pumped from the Ypsilanti well field is replenished by ground-water flow from adjacent stretches of the Huron Valley and from the upland areas outside the valley, from precipitation on the valley in the vicinity of the well field, and possibly from the Huron River. It is believed that sufficient water can be obtained from the well field to meet the expected demand for a considerable time. The safe yield of the present wells is estimated to be not less than 3 million gallons per day, and detailed pumping tests might show that still larger supplies could be safely developed. The water supply of the Willow Run Townsite is obtained from four wells in two well fields about 2 miles apart, one well in the northwest or Prospect and Geddes Road field, and three wells in the southeast or Wiard Road field. The pumpage was originally expected to be 2 to 3 million gallons per day, but it averaged only about 450,000 gallons per day from March 1943 through June 1945. The evidence afforded by logs of wells and by pumping tests indicates that the water-bearing gravels at the townsite are covered by relatively impermeable materials and thus that the rate of recharge is low. However, only relatively small declines in water level have occurred during more than 2 years' operation of the wells, indicating that recharge may occur nearby. The safe yield of the present wells is estimated to be 1.0 to 1.5 million gallons per day, and detailed pumping tests might show it to be somewhat greater. The water supply of the Willow Run Townsite has the smallest potential capacity of the three major ground-water supplies in the area; however, the demand has been relatively small, and no difficulty should arise unless this demand increases greatly. The investigation involved the drilling of 13 test wells to locate additional ground-water supplies, on the assumption that the wartime demand for water in the Ypsilanti area might increase beyond the capacity of the present sources. All 13 wells were drilled at sites selected by the Geological Survey. Two wells on the Willow Run Townsite were drilled by the Federal Public Housing Authority and 11 at other sites by the Federal Works Agency. Records of the wells are given in the report and discussed with respect to the availability of water at the different sites; similarly, the results of the controlled pumping tests made on four of the test wells drilled by the Federal Works Agency are analyzed and discussed with respect to the availability of additional water. The combined results of the test drilling and the pumping tests show that emergency supplies of several million gallons per day can be developed at the sites of the test wells. The best site shown by the test drilling is on the south bank of the Huron River opposite the bomber-plant well field, where a Well with a capacity of several thousand gallons per minute could be constructed if necessary. Three wells in the outwash-filled valley now occupied by Fleming Creek, on two of which pumping tests were made, show that emergency supplies ranging from a few hundred thousand to a million gallons per day could be developed at these test-well sites if necessary. Smaller Supplies ranging from a gallon or two per minute to perhaps 100,000 or 200,000 gallons per day could be developed at the sites of the remaining test Wells. Pumping tests made on the supply wells of the three major water users by the consulting-engineering firms who designed the systems are analyzed and discussed briefly by the authors. The report includes maps and graphs showing the surficial geology of the area, the location of wells, and fluctuations of water level in selected wells. Alsp included are tables giving data on water levels and pumpage, chemical analyses of representative ground waters, and records of wells.

Michigan↗

Coastal circulation and sediment dynamics along west Maui, Hawaii. Part IV: Measurements of waves, currents, temperature, salinity and turbidity in Honolua Bay, northwest Maui: 2003-2004

High-resolution measurements of waves, currents, water levels, temperature, salinity and turbidity were made in Honolua Bay, northwest Maui, Hawaii, during 2003 and 2004 to better understand coastal dynamics in coral reef habitats. Measurements were acquired through two different collection methods. Two hydrographic survey cruises were conducted to acquire spatially-extensive, but temporally-limited, three-dimensional measurements of currents, temperature, salinity and turbidity in the winter and summer of 2003. From mid 2003 through early 2004, a bottom-mounted instrument package was deployed in a water depth of 10 m to collect long-term, single-point high-resolution measurements of waves, currents, water levels, temperature, salinity and turbidity. The purpose of these measurements was to collect hydrographic data to learn how waves, currents and water column properties such as water temperature, salinity and turbidity vary spatially and temporally in a near-shore coral reef system adjacent to a major stream drainage. These measurements support the ongoing process studies being conducted as part of the U.S. Geological Survey (USGS) Coastal and Marine Geology Program's Coral Reef Project; the ultimate goal is to better understand the transport mechanisms of sediment, larvae, pollutants and other particles in coral reef settings. This report, the final part in a series, describes data acquisition, processing and analysis. Previous reports provided data and results on: Long-term measurements of currents, temperature, salinity and turbidity off Kahana (PART I), the spatial structure of currents, temperature, salinity and suspended sediment along West Maui (PART II), and flow and coral larvae and sediment dynamics during the 2003 summer spawning season (PART III).

Hawaii↗

Gravitational spreading of steep-sided ridges ("sackung") in Colorado

Large-scale gravitational spreading and fracturing of steep-sided ridges in the mountainous area of Colorado are characterized by horizontal linear fissures, trenches, and uphill-facing scarps on tops and sides of ridges. A pronounced north-trending cleft and several minor scarps have split a ridge extending northward from Dolores Peak in the San Miguel Mountains of southwestern Colorado. This ridge is capped by granogabbro of a Tertiary laccolith that intruded the Cretaceous Mancos Shale. Numerous active landslides in shale mantle the once glaciated lower slopes. Trenches in the granogabbro probably originated after glacial ice melted, leaving steep sides of the ridge unsupported. The soft Mancos shale moved outward toward the direction of least stress, placing the overlying granogabbro under tension. A ridge that extends southwest from Bald Eagle Mountain, north of Mount Massive in central Colorado, is marked by a graben on the top and several trenches on the northwest side, parallel to the long axis of the ridge. Rock exposed in graben and trenches is the Precambrian St. Kevin Granite, which includes some schist and migmatite. Gravitational movement probably took place after steepening of the valley sides by glacial erosion and melting of the glaciers. Movement followed preexisting discontinuities in the rock. A survey course approximately 2.4 km (1.5 mi) long has been placed across .the fractured ridge. It will be monitored periodically to determine whether movement is continuing, and if so, at what rate.

Colorado↗

Changes in distribution of Canada geese nesting in Arkansas

The reintroduced Canada goose ( Branta canadensis ) population in Arkansas has grown in range and abundance in recent decades. We determined the geographic range of Arkansas resident Canada geese from 2004 to 2012 using volume contour maps from citizen science observations using eBird, a citizen science website, and hunter recovery locations from the U.S. Geological Survey Bird Banding Laboratory. Resulting maps indicate an increase in Canada goose encounters toward northwestern and southwestern Arkansas from the original relocations in the Arkansas River valley. We examined movement of Canada geese banded and recovered in Arkansas by determining the distance and angle of movement between initial and final encounter locations; 25% moved east, and 17% went west. The average distance moved from banding to recovery was 50 km (SE = 1 km). Recoveries of Canada geese banded in Arkansas were greatest in the Mississippi Flyway (58% of all geese) followed by the Central Flyway (37%) with some representation in both the Atlantic (4%) and Pacific flyways (0.9%). Movement from Arkansas to other states and Canada was influenced by goose age and sex. Older individuals traveled longer distances than younger ones, and females traveled longer distances than males. Our findings suggest that recently established Canada geese in Arkansas have slowly expanded within the state to the northwest and southwest with the expansion to the east being important now. Movement of Arkansas resident Canada geese on molt-migration can contribute to management issues in other states and provinces.

Arkansas↗

Gravity and magnetic data in the vicinity of Virgin Valley, southern Nevada

This report contains 10 interpretive cross sections and an integrated text describing the geology of parts of the Colorado, White River, and Death Valley regional ground-water flow systems, Nevada, Utah, and Arizona. The primary purpose of the report is to provide geologic framework data for input into a numerical ground-water model. Therefore, the stratigraphic and structural summaries are written in a hydrogeologic context. The oldest rocks (basement) are Early Proterozoic metamorphic and intrusive crystalline rocks that are considered confining units because of their low permeability. Late Proterozoic to Lower Cambrian clastic units overlie the crystalline rocks and are also considered confining units within the regional flow systems. Above the clastic units are Middle Cambrian to Lower Permian carbonate rocks that are the primary aquifers in the flow systems. The Middle Cambrian to Lower Permian carbonate rocks are overlain by a sequence of mainly clastic rocks of late Paleozoic to Mesozoic age that are mostly considered confining units, but they may be permeable where faulted. Tertiary volcanic and plutonic rocks are exposed in the northern and southern parts of the study area. In the Clover and Delamar Mountains, these rocks are highly deformed by north- and northwest-striking normal and strike-slip faults that are probably important conduits in transmitting ground water from the basins in the northern Colorado and White River flow systems to basins in the southern part of the flow systems. The youngest rocks in the region are Tertiary to Quaternary basin-fill deposits. These rocks consist of middle to late Tertiary sediments consisting of limestone, conglomerate, sandstone, tuff, and gypsum, and younger Quaternary surficial units consisting of alluvium, colluvium, playa deposits, and eolian deposits. Basin-fill deposits are both aquifers and aquitards.

Open-File Report↗