Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Earth Observer”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69Linked to original sources
USGS2018

Testing for the ‘predictability’ of dynamically triggered earthquakes in Geysers Geothermal Field

The Geysers geothermal field is well known for being susceptible to dynamic triggering of earthquakes by large distant earthquakes, owing to the introduction of fluids for energy production. Yet, it is unknown if dynamic triggering of earthquakes is ‘predictable’ or whether dynamic triggering could lead to a potential hazard for energy production. In this paper, our goal is to investigate the characteristics of triggering and the physical conditions that promote triggering to determine whether or not triggering is in anyway foreseeable. We find that, at present, triggering in The Geysers is not easily ‘predictable’ in terms of when and where based on observable physical conditions. However, triggered earthquake magnitude positively correlates with peak imparted dynamic stress, and larger dynamic stresses tend to trigger sequences similar to mainshock–aftershock sequences. Thus, we may be able to ‘predict’ what size earthquakes to expect at The Geysers following a large distant earthquake.

California↗
USGS2005

Evolution of melt-vapor surface tension in silicic volcanic systems: Experiments with hydrous melts

We evaluate the melt‐vapor surface tension (σ) of natural, water‐saturated dacite melt at 200 MPa, 950–1055°C, and 4.8–5.7 wt % H 2 O. We experimentally determine the critical supersaturation pressure for bubble nucleation as a function of dissolved water and then solve for σ at those conditions using classical nucleation theory. The solutions obtained give dacite melt‐vapor surface tensions that vary inversely with dissolved water from 0.042 (±0.003) J m −2 at 5.7 wt % H 2 O to 0.060 (±0.007) J m −2 at 5.2 wt % H 2 O to 0.073 (±0.003) J m −2 at 4.8 wt % H 2 O. Combining our dacite results with data from published hydrous haplogranite and high‐silica rhyolite experiments reveals that melt‐vapor surface tension also varies inversely with the concentration of mafic melt components (e.g., CaO, FeO total , MgO). We develop a thermodynamic context for these observations in which melt‐vapor surface tension is represented by a balance of work terms controlled by melt structure. Overall, our results suggest that cooling, crystallization, and vapor exsolution cause systematic changes in σ that should be considered in dynamic modeling of magmatic processes.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Geomagnetic local and regional harmonic analyses

Procedures are developed for using rectangular and cylindrical harmonic analyses in local and regional areas. Both the linear least squares analysis, applicable when component data are available, and the nonlinear least squares analysis, applicable when only total field data are available, are treated. When component data are available, it is advantageous to work with residual fields obtained by subtracting components derived from a harmonic potential from the observed components. When only total field intensity data are available, they must be used directly. Residual values cannot be used. Cylindrical harmonic analyses are indicated when fields tend toward cylindrical symmetry; otherwise, rectangular harmonic analyses will be more advantageous. Examples illustrating each type of analysis are given.

Journal of Geophysical Research Solid Earth↗
USGS2012

Recently Active Traces of the Berryessa Fault, California: A Digital Database

The purpose of this map is to show the location of and evidence for recent movement on active fault traces within the Berryessa section and parts of adjacent sections of the Green Valley Fault Zone, California. The location and recency of the mapped traces is primarily based on geomorphic expression of the fault as interpreted from large-scale 2010 aerial photography and from 2007 and 2011 0.5 and 1.0 meter bare-earth LiDAR imagery (that is, high-resolution topographic data). In a few places, evidence of fault creep and offset Holocene strata in trenches and natural exposures have confirmed the activity of some of these traces. This publication is formatted both as a digital database for use within a geographic information system (GIS) and for broader public access as map images that may be browsed on-line or download a summary map . The report text describes the types of scientific observations used to make the map, gives references pertaining to the fault and the evidence of faulting, and provides guidance for use of and limitations of the map.

California↗
USGS2005

Unexpected trend in the compositional maturity of second-cycle sand

It is generally accepted that recycling of sandstone generates relatively more mature sand than its parent sandstone. Such maturity is accomplished mainly through chemical weathering as the chemically unstable minerals are eliminated. Because chemical weathering is ubiquitous on the Earth's surface, maturity due to recycling is expected in most geological settings. However, contrary to one's expectation, second-cycle Holocene sand, exclusively derived from sandy facies of the first-cycle Pennsylvanian-Permian Cutler Formation, is actually less mature than its first-cycle parent near Gateway, Colorado. Both the Cutler sandstone and Holocene sand were the products of similar geological processes that controlled their respective composition. In spite of such similarities, a significant difference in composition is observed. We propose that the unexpected immaturity in second-cycle Holocene sand may be due to mechanical disintegration of coarse-grained feldspar and feldspar-rich rock fragments into relatively smaller fractions. Results presented in this paper are the first quantitative estimation of recycling of parent sandstone into daughter sand, and the first observed reverse maturity trend in second-cycle sand. These unexpected results suggest the need for further research to quantitatively understand the recycling process. ?? 2005 Elsevier B.V. All rights reserved.

Sedimentary Geology↗
USGS1998

The petrogenesis of felsic calc-alkaline magmas from the southernmost Cascades, California: Origin by partial melting of basaltic lower crust

The majority of felsic rocks from composite centers in the southernmost Cascades have geochemical and Sr, Nd and Pb isotopic ratios that suggest derivation by partial melting of lower crust that is compositionally similar to calc-alkaline basalts observed in the region. Only a few felsic rocks have δ 18 O and Pb isotopic compositions that indicate interaction with the upper crust. Mineralogical and geochemical differences among the felsic magmas result primarily from melting under variable f (H 2 O) and temperature conditions. Partial melting under low f (H 2 O) and high temperature conditions leaves an amphibole-poor residuum, and produces magmas that have orthopyroxene as the most abundant ferromagnesian phenocryst, relatively low silica contents, and straight rare earth element patterns. Partial melting under higher f (H 2 O) and lower temperature conditions leaves an amphibole-rich residuum, and produces magmas that have amphibole ± biotite phenocrysts, relatively high silica contents, and pronounced middle rare earth element depletions. These conclusions are consistent with published thermal models that suggest that reasonable volumes of basaltic magma emplaced beneath large composite centers in the southernmost Cascades can serve as the heat source for melting of the lower crust. Melting of the lower crust under variable f (H 2 O) conditions is likely to result from differences in the H 2 O contents of these basaltic magmas.

Journal of Petrology↗
USGS2015

Geology of Joshua Tree National Park geodatabase

The database in this Open-File Report describes the geology of Joshua Tree National Park and was completed in support of the National Cooperative Geologic Mapping Program of the U.S. Geological Survey (USGS) and in cooperation with the National Park Service (NPS). The geologic observations and interpretations represented in the database are relevant to both the ongoing scientific interests of the USGS in southern California and the management requirements of NPS, specifically of Joshua Tree National Park (JOTR). Joshua Tree National Park is situated within the eastern part of California’s Transverse Ranges province and straddles the transition between the Mojave and Sonoran deserts. The geologically diverse terrain that underlies JOTR reveals a rich and varied geologic evolution, one that spans nearly two billion years of Earth history. The Park’s landscape is the current expression of this evolution, its varied landforms reflecting the differing origins of underlying rock types and their differing responses to subsequent geologic events. Crystalline basement in the Park consists of Proterozoic plutonic and metamorphic rocks intruded by a composite Mesozoic batholith of Triassic through Late Cretaceous plutons arrayed in northwest-trending lithodemic belts. The basement was exhumed during the Cenozoic and underwent differential deep weathering beneath a low-relief erosion surface, with the deepest weathering profiles forming on quartz-rich, biotite-bearing granitoid rocks. Disruption of the basement terrain by faults of the San Andreas system began ca. 20 Ma and the JOTR sinistral domain, preceded by basalt eruptions, began perhaps as early as ca. 7 Ma, but no later than 5 Ma. Uplift of the mountain blocks during this interval led to erosional stripping of the thick zones of weathered quartz-rich granitoid rocks to form etchplains dotted by bouldery tors—the iconic landscape of the Park. The stripped debris filled basins along the fault zones. Mountain ranges and basins in the Park exhibit an east-west physiographic grain controlled by left-lateral fault zones that form a sinistral domain within the broad zone of dextral shear along the transform boundary between the North American and Pacific plates. Geologic and geophysical evidence reveal that movement on the sinistral faults zones has resulted in left steps along the zones, resulting in the development of sub-basins beneath Pinto Basin and Shavers and Chuckwalla Valleys. The sinistral fault zones connect the Mojave Desert dextral faults of the Eastern California Shear Zone to the north and east with the Coachella Valley strands of the southern San Andreas Fault Zone to the west. Quaternary surficial deposits accumulated in alluvial washes and playas and lakes along the valley floors; in alluvial fans, washes, and sheet wash aprons along piedmonts flanking the mountain ranges; and in eolian dunes and sand sheets that span the transition from valley floor to piedmont slope. Sequences of Quaternary pediments are planed into piedmonts flanking valley-floor and upland basins, each pediment in turn overlain by successively younger residual and alluvial surficial deposits.

California↗
USGS2009

The SCEC/USGS dynamic earthquake rupture code verification exercise

Numerical simulations of earthquake rupture dynamics are now common, yet it has been difficult to test the validity of these simulations because there have been few field observations and no analytic solutions with which to compare the results. This paper describes the Southern California Earthquake Center/U.S. Geological Survey (SCEC/USGS) Dynamic Earthquake Rupture Code Verification Exercise, where codes that simulate spontaneous rupture dynamics in three dimensions are evaluated and the results produced by these codes are compared using Web-based tools. This is the first time that a broad and rigorous examination of numerous spontaneous rupture codes has been performed—a significant advance in this science. The automated process developed to attain this achievement provides for a future where testing of codes is easily accomplished. Scientists who use computer simulations to understand earthquakes utilize a range of techniques. Most of these assume that earthquakes are caused by slip at depth on faults in the Earth, but hereafter the strategies vary. Among the methods used in earthquake mechanics studies are kinematic approaches and dynamic approaches. The kinematic approach uses a computer code that prescribes the spatial and temporal evolution of slip on the causative fault (or faults). These types of simulations are very helpful, especially since they can be used in seismic data inversions to relate the ground motions recorded in the field to slip on the fault(s) at depth. However, these kinematic solutions generally provide no insight into the physics driving the fault slip or information about why the involved fault(s) slipped that much (or that little). In other words, these kinematic solutions may lack information about the physical dynamics of earthquake rupture that will be most helpful in forecasting future events. To help address this issue, some researchers use computer codes to numerically simulate earthquakes and construct dynamic, spontaneous rupture (hereafter called “spontaneous rupture”) solutions. For these types of numerical simulations, rather than prescribing the slip function at each location on the fault(s), just the friction constitutive properties and initial stress conditions are prescribed. The subsequent stresses and fault slip spontaneously evolve over time as part of the elasto-dynamic solution. Therefore, spontaneous rupture computer simulations of earthquakes allow us to include everything that we know, or think that we know, about earthquake dynamics and to test these ideas against earthquake observations.

Seismological Research Letters↗
USGS2017

Refining the formation and early evolution of the Eastern North American Margin: New insights from multiscale magnetic anomaly analyses

To investigate the oceanic lithosphere formation and early seafloor spreading history of the North Atlantic Ocean, we examine multiscale magnetic anomaly data from the Jurassic/Early Cretaceous age Eastern North American Margin (ENAM) between 31 and 40°N. We integrate newly acquired sea surface magnetic anomaly and seismic reflection data with publicly available aeromagnetic and composite magnetic anomaly grids, satellite-derived gravity anomaly, and satellite-derived and shipboard bathymetry data. We evaluate these data sets to (1) refine magnetic anomaly correlations throughout the ENAM and assign updated ages and chron numbers to M0–M25 and eight pre-M25 anomalies; (2) identify five correlatable magnetic anomalies between the East Coast Magnetic Anomaly (ECMA) and Blake Spur Magnetic Anomaly (BSMA), which may document the earliest Atlantic seafloor spreading or synrift magmatism; (3) suggest preexisting margin structure and rifting segmentation may have influenced the seafloor spreading regimes in the Atlantic Jurassic Quiet Zone (JQZ); (4) suggest that, if the BSMA source is oceanic crust, the BSMA may be M series magnetic anomaly M42 (~168.5 Ma); (5) examine the along and across margin variation in seafloor spreading rates and spreading center orientations from the BSMA to M25, suggesting asymmetric crustal accretion accommodated the straightening of the ridge from the bend in the ECMA to the more linear M25; and (6) observe anomalously high-amplitude magnetic anomalies near the Hudson Fan, which may be related to a short-lived propagating rift segment that could have helped accommodate the crustal alignment during the early Atlantic opening.

Journal of Geophysical Research B: Solid Earth↗
USGS2005

Forearc structure beneath southwestern British Columbia: A three-dimensional tomographic velocity model

This paper presents a three-dimensional compressional wave velocity model of the forearc crust and upper mantle and the subducting Juan de Fuca plate beneath southwestern British Columbia and the adjoining straits of Georgia and Juan de Fuca. The velocity model was constructed through joint tomographic inversion of 50,000 first-arrival times from earthquakes and active seismic sources. Wrangellia rocks of the accreted Paleozoic and Mesozoic island arc assemblage underlying southern Vancouver Island in the Cascadia forearc are imaged at some locations with higher than average lower crustal velocities of 6.5-7.2 km/s, similar to observations at other island arc terranes. The mafic Eocene Crescent terrane, thrust landward beneath southern Vancouver Island, exhibits crustal velocities in the range of 6.0-6.7 km/s and is inferred to extend to a depth of more than 20 km. The Cenozoic Olympic Subduction Complex, an accretionary prism thrust beneath the Crescent terrane in the Olympic Peninsula, is imaged as a low-velocity wedge to depths of at least 20 km. Three zones with velocities of 7.0-7.5 km/s, inferred to be mafic and/or ultramafic units, lie above the subducting Juan de Fuca plate at depths of 25-35 km. The forearc upper mantle wedge beneath southeastern Vancouver Island and the Strait of Georgia exhibits low velocities of 7.2-7.5 km/s, inferred to correspond to ???20% serpentinization of mantle peridotites, and consistent with similar observations in other warm subduction zones. Estimated dip of the Juan de Fuca plate beneath southern Vancouver Island is ???11??, 16??, and 27?? at depths of 30, 40, and 50 km, respectively. Copyright 2005 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS2025

Rainfall thresholds for postfire debris-flow initiation vary with short-duration rainfall climatology

The size, frequency, and geographic scope of severe wildfires are expanding across the globe, including in the Western United States. Recently burned steeplands have an increased likelihood of debris flows, which pose hazards to downstream communities. The conditions for postfire debris-flow initiation are commonly expressed as rainfall intensity-duration thresholds, which can be estimated given sufficient observational history. However, the spread of wildfire across diverse climates poses a challenge for accurate threshold prediction in areas with limited observations. Studies of mass-movement processes in unburned areas indicate that thresholds vary with local climate, such that higher rainfall rates are required for initiation in climates characterized by frequent intense rainfall. Here, we use three independent methods to test whether initiation of postfire runoff-generated debris flows across the Western United States varies similarly with climate. Through the compilation of observed thresholds at various fires, analysis of the spatial density of observed debris flows, and quantification of feature importance at different spatial scales, we show that postfire debris-flow initiation thresholds vary systematically with short-duration rainfall-intensity climatology. The predictive power of climatological data sets that are readily available before a fire occurs offers a much-needed tool for hazard management in regions that are facing increased wildfire activity, have sparse observational history, and/or have limited resources for field-based hazard assessment. Furthermore, if the observed variation in thresholds reflects long-term adjustment of the landscape to local climate, rapid shifts in rainfall intensity related to climate change will likely induce spatially variable shifts in postfire debris-flow likelihood.

Arizona, California, Colorado, Nevada, New Mexico,↗
USGS2011

A promising tool for subsurface permafrost mapping-An application of airborne geophysics from the Yukon River Basin, Alaska

Permafrost is a predominant physical feature of the Earth's Arctic and Subarctic clines and a major consideration encompassing ecosystem structure to infrastructure engineering and placement. Perennially frozen ground is estimated to cover about 85 percent of the state of Alaska where northern reaches are underlain with continuous permafrost and parts of interior Alaska are underlain by areas of discontinuous and (or) sporadic permafrost (fig. 1). The region of Interior Alaska, where permafrost is scattered among unfrozen ground, is a complex mosaic of terrains and habitats. Such diversity creates arrays of lakes and surface-water and groundwater patterns that continental populations of migratory waterfowl and internationally significant fisheries have adapted to over time. A road or pipeline might pass over frozen and unfrozen ground, affecting the types of materials and engineering approaches needed to sustain the infrastructure. Effective mapping of discontinuous permafrost at scales meaningful ecologically and (or) from an engineering perspective has been a long-standing challenge. Using techniques such as borehole logging for site-specific assessments or botanical techniques that can suggest underlying permafrost distributions can be labor intensive and difficult to accomplish at the scale and remoteness of much of Alaska. The climate is changing in the Arctic and Subarctic regions. The warming observed throughout much of Alaska could create widespread changes in permafrost. How the warming of the permafrost affects near-surface processes, ecosystems, and community infrastructure and ecosystems is not clear. A better understanding of the dynamic distribution and physical properties of permafrost, from continuous to discontinuous, will provide knowledge of how the permafrost environment may change in the future and help inform engineering and natural resource response strategies. Here we discuss an application of an airborne remote sensing methodology for mapping and shade imaging permafrost characteristics at various scales. This work provides the first look into three-dimensional distribution of permafrost in the areas around Fort Yukon and is a demonstration of the application of airborne electromagnetic (AEM) to permafrost mapping. Such an approach is attractive, particularly in Arctic and Subarctic studies, where ground access is difficult and ecosystems are fragile. In June 2010, the U.S. Geological Survey (USGS) conducted an AEM survey near Fort Yukon, Alaska. The primary focus of this survey was to map the distribution of permafrost in selected areas in order to supply information for the development of groundwater models of the Yukon River Basin. However, the methodologies have more far-reaching ecological and engineering applications. Approximately 1,800 line kilometers were acquired in a combination of typical block style surveying in the immediate area of Fort Yukon and in long reconnaissance lines over a broader area. The widely spaced lines were flown to cross the modern Yukon River in "X" like patterns with intersections at features that have been previously studied (fig. 2). AEM is used to gather data on the electrical resistivity of materials in the subsurface below the flight path of the helicopter, which are then analyzed to interpret the subsurface lithology and the location and extent of permafrost. For this survey, the electrical resistivity was imaged to depths on the order of 50-100 meters. Images from the survey can be qualitatively compared with known permafrost features and suggest new permafrost features. Electrical properties of earth materials are affected by lithology as well as temperature and the presence of ice; frozen materials become substantially more resistive. This allows for the identification of permafrost from the resistivity image (Abraham and others, 2011). In the area of Fort Yukon, the AEM survey shows elevated resistivities extending to depth, likely indicative of thick permafrost. This depth corresponds well to observations from a borehole drilled in the area in the late 1990s, which detected permafrost to a depth of about 100 meters (Clark and others, 2009). In contrast to the area of Fort Yukon, the Yukon River and its floodplain are not associated with deep resistive sediments, suggesting a lack of deep permafrost, at least within the depth range of the AEM mapping (fig. 3).

Yukon River Basin↗
USGS2009

Stratospheric microbiology at 20 km over the Pacific Ocean

An aerobiology sampling flight at 20 km was conducted on 28 April 2008 over the Pacific Ocean (36.5° N, 118–149° W), a period of time that coincided with the movement of Asian dust across the ocean. The aim of this study was to confirm the presence of viable bacteria and fungi within a transoceanic, atmospheric bridge and to improve the resolution of flight hardware processing techniques. Isolates of the microbial strains recovered were analyzed with ribosomal ribonucleic acid (rRNA) sequencing to identify bacterial species Bacillus sp., Bacillus subtilis, Bacillus endophyticus, and the fungal genus Penicillium. Satellite imagery and ground-based radiosonde observations were used to measure dust movement and characterize the high-altitude environment at the time of collection. Considering the atmospheric residency time (7–10 days), the extreme temperature regime of the environment (-75°C), and the absence of a mechanism that could sustain particulates at high altitude, it is unlikely that our samples indicate a permanent, stratospheric ecosystem. However, the presence of viable fungi and bacteria in transoceanic stratosphere remains relevant to understanding the distribution and extent of microbial life on Earth.

Aerobiologia↗
USGS1975

Trace element evaluation of a suite of rocks from Reunion Island, Indian Ocean

Reunion Island consists of an olivine-basalt shield capped by a series of flows and intrusives ranging from hawaiite through trachyte. Eleven rocks representing the total compositional sequence have been analyzed for U, Th and REE. Eight of the rocks (group 1) have positive-slope, parallel, chondrite-normalized REE fractionation patterns. Using a computer model, the major element compositions of group 1 whole rocks and observed phenocrysts were used to predict the crystallization histories of increasingly residual liquids, and allowed semi-quantitative verification of origin by fractional crystallization of the olivine-basalt parent magma. Results were combined with mineral-liquid distribution coefficient data to predict trace element abundances, and existing data on Cr, Ni, Sr and Ba were also successfully incorporated in the model. The remaining three rocks (group 2) have nonuniform positive-slope REE fractionation patterns not parallel to group 1 patterns. Rare earth fractionation in a syenite is explained by partial melting of a source rich in clinopyroxene and/or hornblende. The other two rocks of group 2 are explained as hybrids resulting from mixing of syenite and magmas of group 1.

Geochimica et Cosmochimica Acta↗
USGS2020

Dual clumped isotope thermometry resolves kinetic biases in carbonate formation temperatures

Surface temperature is a fundamental parameter of Earth’s climate. Its evolution through time is commonly reconstructed using the oxygen isotope and the clumped isotope compositions of carbonate archives. However, reaction kinetics involved in the precipitation of carbonates can introduce inaccuracies in the derived temperatures. Here, we show that dual clumped isotope analyses, i.e., simultaneous Δ 47 and Δ 48 measurements on the single carbonate phase, can identify the origin and quantify the extent of these kinetic biases. Our results verify theoretical predictions and evidence that the isotopic disequilibrium commonly observed in speleothems and scleractinian coral skeletons is inherited from the dissolved inorganic carbon pool of their parent solutions. Further, we show that dual clumped isotope thermometry can achieve reliable palaeotemperature reconstructions, devoid of kinetic bias. Analysis of a belemnite rostrum implies that it precipitated near isotopic equilibrium and confirms the warmer-than-present temperatures during the Early Cretaceous at southern high latitudes.

Nature Communications↗
USGS2009

Remote sensing of snow and ice

Monitoring of snow and ice on the Earth's surface will require increasing use of satellite remote sensing techniques. These techniques are evolving rapidly. Active and passive sensors operating in the visible, near infrared, thermal infrared, and microwave wavelengths are described in regard to general applications and in regard to specific USA or USSR satellites. Meteorological satellites (frequent images of relatively crude resolution) and Earth resources satellites such as Landsat (less frequent images of higher resolution) have been used to monitor the areal extent of seasonal snow, but problems exist with cloud cover or dense forest canopies. Snow mass (water equivalent) can be measured from a low-flying aircraft using natural radioactivity, but cannot yet be measured from satellite altitudes. A combination of active and passive microwave sensors may permit this kind of measurement, but not until more is known about radiation scattering in snow. Satellite observations are very useful in glacier inventories, correcting maps of glacier extent, estimating certain mass balance parameters, and monitoring calving or surging glaciers. Ground ice is virtually impossible to monitor from satellites; ice on rivers and lakes can be monitored only with very high-resolution sensors. Microwave sensors, due to their all-weather capability (the ability to see through clouds) provide exciting data on sea ice distribution. Analysis of digital tapes of satellite data requires the archiving and scanning of huge amounts of data. Simple methods for extracting quantitative data from satellite images are described.

Hydrological Sciences Bulletin↗
USGS2014

Petrology and chemistry of the Green Acres gabbro complex near Winchester, Riverside County, California

The Cretaceous Green Acres layered igneous complex, northeast of Winchester, California, is composed of a suite of olivine- and hornblende-bearing gabbros in the Peninsular Ranges batholith within the Perris tectonic block. A consistent mineral assemblage is observed throughout the complex, but there is considerable textural and modal heterogeneity. Both preclude a consistent set of principles based on appearance and mineralogy on which to delineate map units. Distinct changes in the chemistry of olivine, pyroxene, and hornblende, however, serve to define discrete mappable units, and the complex has been divided into five geochemical map units on this basis. Limited whole-rock data show the Green Acres complex is chemically comparable to other Peninsular Ranges batholith gabbroic rocks, and rare earth element (REE) concentrations and patterns are typical of magmas generated in convergent margin settings. For the complex as a whole, olivine is Fo 80–35 , plagioclase is An 100–64 , clinopyroxene is Wo 49–41 En 48–38 Fs 18–6 and Wo 36–26 En 65–42 Fs 30–8 , and orthopyroxene is Wo 5–0 En 78–42 Fs 50–21 , where Fo is forsterite, An is anorthite, Wo is wollastonite, En is enstatite, and Fs is ferrosilite. The Mg/(Mg + ΣFe) atomic ratio in hornblende ranges from 0.84 to 0.50. Magmatic lineations and modal and textural layering are prevalent throughout the complex. Mineral chemistry does not change in any systematic way within and between layers in any map unit. Although the strike of layering varies, in any map unit at any given location it is the same in all units irrespective of intrusive order. Thin dikes, typically late-stage hornblende gabbro, commonly intrude parallel to layering. The strikes of magmatic lineations and modal layers are consistent with the populations of strikes of fabrics in the metamorphic basement as well as tectonic features in surrounding, postgabbro granitic rocks. These relations imply that the regional state of stress at the time of gabbro emplacement played a role in layer formation in conjunction with thermal and hydraulic pressure perturbations.

California↗
USGS2008

Recent damaging earthquakes in Japan, 2003-2008

During the last six years, from 2003-2008, Japan has been struck by three significant and damaging earthquakes: The most recent M6.6 Niigata Chuetsu Oki earthquake of July 16, 2007 off the coast of Kashiwazaki City, Japan; The M6.6 Niigata Chuetsu earthquake of October 23, 2004, located in Niigata Prefecture in the central Uonuma Hills; and the M8.0 Tokachi Oki Earthquake of September 26, 2003 effecting southeastern Hokkaido Prefecture. These earthquakes stand out among many in a very active period of seismicity in Japan. Within the upper 100 km of the crust during this period, Japan experienced 472 earthquakes of magnitude 6, or greater. Both Niigata events affected the south-central region of Tohoku Japan, and the Tokachi-Oki earthquake affected a broad region of the continental shelf and slope southeast of the Island of Hokkaido. This report is synthesized from the work of scores of Japanese and US researchers who led and participated in post-earthquake reconnaissance of these earthquakes: their noteworthy and valuable contributions are listed in an extended acknowledgements section at the end of the paper. During the Niigata Chuetsu Oki event of 2007, damage to the Kashiwazaki-Kariwa nuclear power plant, structures, infrastructure, and ground were primarily the product of two factors: (1) high intensity motions from this moderate-sized shallow event, and (2) soft, poor performing, or liquefiable soils in the coastal region of southwestern Niigata Prefecture. Structural and geotechnical damage along the slopes of dunes was ubiquitous in the Kashiwazaki-Kariwa region. The 2004 Niigata Chuetsu Earthquake was the most significant to affect Japan since the 1995 Kobe earthquake. Forty people were killed, almost 3,000 were injured, and many hundreds of landslides destroyed entire upland villages. Landslides were of all types; some dammed streams, temporarily creating lakes threatening to overtop their new embankments and cause flash floods and mudslides. The numerous landslides resulted, in part, from heavy rain associated with Typhoon Tokage. The earthquake forced more than 100,000 people into temporary shelters, and as many as 10,000 displaced from their upland homes for several years. Total damages was estimated by Japanese authorities at US$40 billion, making this the second most costly disaster in history, after the 1995 Kobe earth-quake. The 2003 Tokachi-Oki earthquake was the third event of magnitude 8.0+ to strike the southeastern portion of Hokkaido in the last 50 years. The event produced tsunami run-ups along the shoreline of southern Hokkaido that reached maximum heights of 4 meters. Accelerations recorded by seismic networks of Hokkaido indicated a high intensity motion region from Hiroo area to Kushiro City, with a PGA values in the range of 0.35 to 0.6g. Despite high acceleration levels, the observed ground failure, liquefaction, structural, port, and lifeline damages were remarkably light.

Conference Paper↗