Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68Linked to original sources
USGS2001

Petroleum geology and resources of the Baykit High province, East Siberia, Russia

The Baykit High province consists of two principal structural units?the Baykit regional high in the west, which occupies most of the province, and the Katanga structural saddle in the east. The province is on the western margin of the Siberian craton east of theYenisey Ridge foldbelt. The province is an exploration frontier and only a few prospects have been drilled. The oldest sedimentary rocks of the province, Riphean carbonate and clastic strata of Late Proterozoic age (1,650?650 million years old) that were deposited on the passive margin, cover the Archean?Lower Proterozoic basement. Basal Vendian (uppermost Proterozoic, 650?570 million years old) clastic rocks unconformably overlie various units of the Riphean and locally lie directly on the basement. Younger Vendian and lowermost Cambrian rocks are primarily dolomites. The Vendian/Cambrian boundary is con-formable, and its exact stratigraphic position has not been identified with certainty. The Lower Cambrian section is thick, and it consists of alternating beds of dolomite and evaporites (mostly salt). Middle and Upper Cambrian strata are composed of shale and dolomite. Ordovician-Silurian and upper Paleozoic rocks are thin, and they are present only in the northern areas of the province. Structural pattern of Riphean rocks differs substantially from that of Vendian-Cambrian rocks. A single total petroleum system (TPS) was identified in the Baykit High province. Discovered oil of the system is chiefly concentrated in Riphean carbonate reservoirs of the Yurubchen-Tokhom zone that is currently being explored and that has the Abstract 1 potential to become a giant field (or group of fields). The TPS also contains about 5 trillion cubic feet of discovered recover-able gas in clastic reservoir rocks at the base of the Vendian section. Petroleum source rocks are absent in the stratigraphic succession over most of the TPS area. Riphean organic-rich shales and carbonates that crop out in the Yenisey Ridge foldbelt west of the Baykit high are probable source rocks. Their areal distribution extends from the foldbelt into the foredeep along the province?s western margin. Potential source rocks also are present in platform depressions in eastern areas of the province. Hydrocarbon generation and migration west of the province started as early as Riphean time, before the beginning of the deformation in the Yenisey Ridge foldbelt that occurred about 820?850 million years ago. However, the presently known oil and gas accumulations were formed after deposition of the Lower Cambrian salt seal. Available data allow identification of only one assessment unit, and it covers the entire TPS area. Undiscovered oil and gas resources are moderate, primarily due to the poor quality of reservoir rocks. However, the reserve growth in the Yurubchen-Tokhom zone may be large and may exceed the volume of undiscovered resources in the rest of the province. Most oil and gas resourcesareexpectedtobeinstructuralandstratigraphictrapsin Riphean carbonate reservoirs. Vendian clastic reservoirs are probably gas-prone.

Bulletin↗
USGS2001

Geologic studies of deep natural gas resources

In 1995, the USGS estimated a mean resource of 114 trillion cubic feet of undiscovered technically recoverable natural gas in plays deeper than 15,000 feet/4,572 meters in onshore regions of the United States. This volume summarizes major conclusions of ongoing work. Chapters A and B address the areal extent of drilling and distribution of deep basins in the U.S. Chapter C summarizes distribution of deep sedimentary basins and potential for deep gas in the former Soviet Union. Chapters D and E are geochemical papers addressing source-rock issues and deep gas generation. Chapter F develops a probabilistic method for subdividing gas resources into depth slices, and chapter G analyzes the relative uncertainty of estimates of deep gas in plays in the Gulf Coast Region. Chapter H evaluates the mechanism of hydrogenation of deep, high-rank spent kerogen by water, with subsequent generation of methane-rich HC gas.

Data Series↗
USGS2000

Hydrogeology and simulation of ground-water flow at the Gettysburg Elevator Plant Superfund Site, Adams County, Pennsylvania

Ground water in Triassic-age sedimentary fractured-rock aquifers in the area of Gettysburg, Pa., is used as drinking water and for industrial and commercial supply. In 1983, ground water at the Gettysburg Elevator Plant was found by the Pennsylvania Department of Environmental Resources to be contaminated with trichloroethene, 1,1,1-trichloroethane, and other synthetic organic compounds. As part of the U.S. Environmental Protection Agency?s Comprehensive Environmental Response, Compensation, and Liability Act, 1980 process, a Remedial Investigation was completed in July 1991, a method of site remediation was issued in the Record of Decision dated June 1992, and a Final Design Report was completed in May 1997. In cooperation with the U.S. Environmental Protection Agency in the hydrogeologic assessment of the site remediation, the U.S. Geological Survey began a study in 1997 to determine the effects of the onsite and offsite extraction wells on ground-water flow and contaminant migration from the Gettysburg Elevator Plant. This determination is based on hydrologic and geophysical data collected from 1991 to 1998 and on results of numerical model simulations of the local ground-water flow-system. The Gettysburg Elevator Site is underlain by red, green, gray, and black shales of the Heidlersburg Member of the Gettysburg Formation. Correlation of natural-gamma logs indicates the sedimentary rock strike about N. 23 degrees E. and dip about 23 degrees NW. Depth to bedrock onsite commonly is about 6 feet but offsite may be as deep as 40 feet. The ground-water system consists of two zones?a thin, shallow zone composed of soil, clay, and highly weathered bedrock and a thicker, nonweathered or fractured bedrock zone. The shallow zone overlies the bedrock zone and truncates the dipping beds parallel to land surface. Diabase dikes are barriers to ground-water flow in the bedrock zone. The ground-water system is generally confined or semi-confined, even at shallow depths. Depth to water can range from flowing at land surface to more than 71 feet below land surface. Potentiometric maps based on measured water levels at the Gettysburg Elevator Plant indicate ground water flows from west to east, towards Rock Creek. Multiple-well aquifer tests indicate the system is heterogeneous and flow is primarily in dipping beds that contain discrete secondary openings separated by less permeable beds. Water levels in wells open to the pumped bed, as projected along the dipping stratigraphy, are drawn down more than water levels in wells not open to the pumped bed. Ground-water flow was simulated for steady-state conditions prior to pumping and long-term average pumping conditions. The three-dimensional numerical flow model (MODFLOW) was calibrated by use of a parameter estimation program (MODFLOWP). Steady-state conditions were assumed for the calibration period of 1996. An effective areal recharge rate of 7 inches was used in model calibration. The calibrated flow model was used to evaluate the effectiveness of the current onsite and offsite extraction well system. The simulation results generally indicate that the extraction system effectively captures much of the ground-water recharge at the Gettysburg Elevator Plant and, hence, contaminated ground-water migrating from the site. Some of the extraction wells pump at low rates and have very small contributing areas. Results indicate some areal recharge onsite will move to offsite extraction wells.

Pennsylvania↗
USGS2007

The geology of Six Mile Reef, eastern Long Island Sound

Digital terrain models, which can be produced from multibeam bathymetric data, are ordered arrays of depths for a number of sea-floor positions sampled at regularly spaced intervals. These models provide valuable base maps for marine geological interpretations that help define the variability of the sea floor (one of the primary controls of benthic habitat diversity), improve our understanding of the processes that control the distribution and transport of bottom sediments and the distribution of benthic habitats, and provide a detailed framework to guide and assist future research, monitoring, and management activities. The bathymetry interpreted herein was processed from data collected by National Oceanic and Atmospheric Administration vessels during hydrographic surveys H11361 and H11252. These surveys mapped roughly 156 km² of sea floor in the vicinity of Six Mile Reef, an area of eastern Long Island Sound where the sea floor is characterized by fields of large sand waves and an east-west decreasing gradient of bottom tidal-current speeds (fig. 1). Interpretations of the bathymetry are supplemented by concurrently collected seismic reflection data, as well as archived historic seismic profiles, sediment samples and bottom photography collected as part of a long-standing geologic mapping partnership between the State of Connecticut and the U.S. Geological Survey (fig. 2). The purpose of this digital report is 1) to provide the acoustic data layers produced during the above mentioned surveys, 2) to use them to describe the sea-floor character and bedform morphologies near Six Mile Reef, and 3) to relate these descriptions to ongoing processes and sedimentary environments.

Connecticut, New York↗
USGS1956

Contributions to the geology of uranium and thorium by the United States Geological Survey and Atomic Energy Commission for the United Nations International Conference on Peaceful Uses of Atomic Energy, Geneva, Switzerland, 1955

Within the boundaries of the United States abnormal amounts of uranium have been found in rocks of nearly all geologic ages and lithologic types. Distribution of ore is more restricted. On the Colorado Plateau, the Morrison formation of Jurassic age yields 61.4 percent of the ore produced in the United States, and the Chinle conglomerate and Shinarump formation of Triassic age contribute 26.0 and 5.8 percent, respectively. Clastic, carbonaceous, and carbonate sedimentary rocks of Tertiary, Mesozoic, and Paleozoic ages and veins of Tertiary age are the source of the remaining 6.8 percent.

Professional Paper↗
USGS2006

Hydrogeologic Framework and Ground Water in Basin-Fill Deposits of the Diamond Valley Flow System, Central Nevada

The Diamond Valley flow system, an area of about 3,120 square miles in central Nevada, consists of five hydrographic areas: Monitor, Antelope, Kobeh, and Diamond Valleys and Stevens Basin. Although these five areas are in a remote part of Nevada, local government officials and citizens are concerned that the water resources of the flow system eventually could be further developed for irrigation or mining purposes or potentially for municipal use outside the study area. In order to better understand the flow system, the U.S. Geological Survey in cooperation with Eureka, Lander, and Nye Counties and the Nevada Division of Water Resources, is conducting a multi-phase study of the flow system. The principal aquifers of the Diamond Valley flow system are in basin-fill deposits that occupy structural basins comprised of carbonate rocks, siliciclastic sedimentary rocks, igneous intrusive rocks, and volcanic rocks. Carbonate rocks also function as aquifers, but their extent and interconnections with basin-fill aquifers are poorly understood. Ground-water flow in southern Monitor Valley is from the valley margins toward the valley axis and then northward to a large area of discharge by evapotranspiration (ET) that is formed south of a group of unnamed hills near the center of the valley. Ground-water flow from northern Monitor Valley, Antelope Valley, and northern and western parts of Kobeh Valley converges to an area of ground-water discharge by ET in central and eastern Kobeh Valley. Prior to irrigation development in the 1960s, ground-water flow in Diamond Valley was from valley margins toward the valley axis and then northward to a large discharge area at the north end of the valley. Stevens Basin is a small upland basin with internal drainage and is not connected with other parts of the flow system. After 40 years of irrigation pumping, a large area of ground-water decline has developed in southern Diamond Valley around the irrigated area. In this part of Diamond Valley, flow is from valley margins toward the irrigated area. In northern Diamond Valley, flow appears to remain generally northward to the large discharge area. Subsurface flow through mountain ranges has been identified from Garden Valley (outside the study area) through the Sulphur Springs Range to Diamond Valley and from southeastern Antelope Valley through the Fish Creek Range to Little Smoky Valley (outside the study area). In both cases, the flow is probably through carbonate rocks. Ground-water levels in the Diamond Valley flow system have changed during the past 40 years. These changes are the result of pumpage for irrigation, municipal, domestic, and mining uses, mostly in southern Diamond Valley, and annual and longer-term variations in precipitation in undeveloped parts of the study area. A large area of ground-water decline that underlies an area about 10 miles wide and 20 miles long has developed in the basin-fill aquifer of southern Diamond Valley. Water levels beneath the main part of the irrigated area have declined as much as 90 feet. In undeveloped parts of the study area, annual water-level fluctuations generally have been no more than a few feet.

Scientific Investigations Report↗
USGS2015

Fluvial geomorphology and suspended-sediment transport during construction of the Roanoke River Flood Reduction Project in Roanoke, Virginia, 2005–2012

Beginning in 2005, after decades of planning, the U.S. Army Corps of Engineers (USACE) undertook a major construction effort to reduce the effects of flooding on the city of Roanoke, Virginia—the Roanoke River Flood Reduction Project (RRFRP). Prompted by concerns about the potential for RRFRP construction-induced geomorphological instability and sediment liberation and the detrimental effects these responses could have on the endangered Roanoke logperch ( Percina rex ), the U.S. Geological Survey (USGS) partnered with the USACE to provide a real-time warning network and a long-term monitoring program to evaluate geomorphological change and sediment transport in the affected river reach. Geomorphological change and suspended-sediment transport are highly interdependent and cumulatively provide a detailed understanding of the sedimentary response, or lack thereof, of the Roanoke River to construction of the RRFRP. Bed-sediment composition was usually finer in post-construction than pre-construction measurements, yet the annual changes in composition were not significantly different; thus, there was minimal evidence that RRFRP construction practices alone induced fining of bed materials. Cross-sectional surveys revealed variability in bankfull and base-flow channel geometry metrics, but no significant differences in this variability were detected between pre- and post-construction measurements, excluding designed alterations in channel geometry. A lack of channel-forming streamflow events, however, limited the ability to fully characterize the stability of the constructed channel and floodplain features, as bankfull flow events occurred only 2 of the 8 years of study. Therefore, additional channel surveys may be needed in the future, once sufficient channel-forming events have occurred, to fully assess stability. Relations between turbidity and suspended sediment were statistically indistinguishable between the upstream and downstream limits of the RRFRP construction reach. These relations did not change over time, indicating no significant changes in suspended-sediment composition or source in the construction reach during the period of study. Results of the geomorphological and suspended-sediment monitoring components were largely in agreement and consistent with those of a related effort that monitored the logperch population before and during construction. These findings suggest that construction and sediment-control practices sufficiently protected in-stream habitat and the organisms that inhabit those locations, namely the Roanoke logperch, during the period monitored.

Virginia↗
USGS1987

The crustal structure of the axis of the Great Valley, California, from seismic refraction measurements

In 1982 the U.S. Geological Survey collected six seismic refraction profiles in the Great Valley of California: three axial profiles with a maximum shot-to-receiver offset of 160 km, and three shorter profiles perpendicular to the valley axis. This paper presents the results of two-dimensional raytracing and synthetic seismogram modeling of the central axial profile. The crust of the central Great Valley is laterally heterogeneous along its axis, but generally consists of a sedimentary section overlying distinct upper, middle, and lower crustal units. The sedimentary rocks are 3-5 km thick along the profile, with velocities increasing with depth from 1.6 to 4.0 km/s. The basement (upper crust) consists of four units: 1. (1) a 1.0-1.5 km thick layer of velocity 5.4-5.8 km/s, 2. (2) a 3-4 km thick layer of velocity 6.0-6.3 km/s, 3. (3) a 1.5-3.0 km thick layer of velocity 6.5-6.6 km/s, and 4. (4) a laterally discontinuous, 1.5 km thick layer of velocity 6.8-7.0 km/s. The mid-crust lies at 11-14 km depth, is 5-8 km thick, and has a velocity of 6.6-6.7 km/s. On the northwest side of our profile the mid-crust is a low-velocity zone beneath the 6.8-7.0 km/s lid. The lower crust lies at 16-19 km depth, is 7-13 km thick, and has a velocity of 6.9-7.2 km/s. Crustal thickness increases from 26 to 29 km from NW to SE in the model. Although an unequivocal determination of crustal composition is not possible from P-wave velocities alone, our model has several geological and tectonic implications. We interpret the upper 7 km of basement on the northwest side of the profile as an ophiolitic fragment, since its thickness and velocity structure are consistent with that of oceanic crust. This fragment, which is not present 10-15 km to the west of the refraction profile, is probably at least partially responsible for the Great Valley gravity and magnetic anomalies, whose peaks lie about 10 km east of our profile. The middle and lower crust are probably gabbroic and the product of magmatic or tectonic underplating, or both. The crustal structure of the Great Valley is dissimilar to that of the adjacent Diablo Range, suggesting the existence of a fault or suture zone throughout the crust between these provinces.

California↗
USGS1977

Geology of the gabbroic complex along the northern border of the Josephine Peridotite, Vulcan Peak area, southwestern Oregon

The terrane bordering the alpine-type Josephine Peridotite on the north in the Vulcan Peak area, southwestern Oregon, is composed of intrusive hornblende gabbro (Middle Jurassic) and scattered remnants of clinopyroxene-bearing ultramafic rocks and amphibolite. The amphibolite, which preliminary analyses suggest is of andesitic composition, has undergone regional metamorphism to the amphibolite facies and three episodes of plastic folding. The ultramafic rocks overlie the amphibolite with a possible magmatic sedimentary contact, although the contact is not entirely clear and a fault cannot be ruled out. The ultramafic rocks are partially recrystallized owing to the gabbro intrusion and later partially serpentinized; they have undergone two episodes of plastic folding, the second of which correlates with the third in the amphibolite. The intrusion of the gabbro began as early as the second folding episode in the amphibolite and probably continued at least intermittently throughout the third episode of folding and possibly later. After the high-temperature deformation, the Josephine Peridotite was thrust northward over the gabbroic complex along an east-striking south-dipping thrust fault, after which both of these terranes were thrust westward over the Upper Jurassic Dothan Formation along a major north-striking east-dipping thrust fault. The nature of the ultramaflc rocks, their association with an extensive gabbro terrane, and the proximity of a large alpine-type peridotite suggest that the gabbroic and ultramafic complexes are part of an ophiolite sequence. However, if the ultramaflc rocks are cumulates and were deposited on the amphibolite terrane, then the gabbroic complex is somewhat different from the ideal ophiolite model.

Oregon↗
USGS2022

Primary deposition and early diagenetic effects on the high saturation accumulation of gas hydrate in a silt dominated reservoir in the Gulf of Mexico

On continental margins, high saturation gas hydrate systems (>60% pore volume) are common in canyon and channel environments within the gas hydrate stability zone, where reservoirs are dominated by coarse-grained, high porosity sand deposits. Recent studies, including the results presented here, suggest that rapidly deposited, silt-dominated channel-levee environments can also host high saturation gas hydrate accumulations. Here we present several sedimentological data sets, including sediment composition, biostratigraphic age from calcareous nannofossils, grain size, total organic carbon (TOC), C/N elemental ratio, δ 13 C-TOC , CaCO 3 , total sulfur (TS), and δ 34 S-TS from sediments collected with pressure cores from a gas hydrate rich, turbidite channel-levee system in the Gulf of Mexico during the 2017 UT-GOM2-1 Hydrate Pressure Coring Expedition. Our results indicate the reservoir is composed of three main lithofacies, which have distinct sediment grain size distributions (type A-silty clay to clayey silt, type B-clayey silt, and type C-sandy silt to silty sand) that are characteristic of variable turbidity current energy regimes within a Pleistocene (< 0.91 Ma) channel-levee environment. We document that the TOC in the sediments of the reservoir is terrestrial in origin and contained within the fine fraction of each lithofacies, while the CaCO 3 fraction is composed of primarily reworked grains, including Cretaceous calcareous nannofossils, and part of the detrital load. The lack of biogenic grains within the finest grained sediment intervals throughout the reservoir suggests interevent hemipelagic sediments are not preserved, resulting in a reservoir sequence of silt dominated, stacked turbidites. We observe two zones of enhanced TS at the top and bottom of the reservoir that correspond with enriched bulk sediment δ 34 S, indicating stalled or slowly advancing paleo-sulfate-methane transition zone (SMTZ) positions likely driven by relative decreases in sedimentation rate. Despite these two diagenetic zones, the low abundance of diagenetic precipitates throughout the reservoir allowed the primary porosity to remain largely intact, thus better preserving primary porosity for subsequent pore-filling gas hydrate. In canyon, channel, and levee environments, early diagenesis may be regulated via sedimentation rates, where high rates result in rapid progression through the SMTZ and minimal diagenetic mineralization and low rates result in the stalling of the SMTZ, enhancing diagenetic mineralization. Here, we observed some enhanced pyritization to implicate potential sedimentation rate changes, but not enough to consume primary porosity, resulting in a high saturation gas hydrate reservoir. These results emphasize the important implications of sedimentary processes, sedimentation rates, and early diagenesis on the distribution of gas hydrate in marine sediments along continental margins.

Alabama, Louisiana, Mississippi↗
USGS1983

Evidence for two pulses of glaciation during the late Proterozoic in northern Utah and southeastern Idaho

A record of glaciation during late Proterozoic time is preserved in a number of localities extending from the Sheeprock Mountains, Utah, to Pocatello, Idaho, and from the Park City area 40 km east of Salt Lake City to the Deep Creek Range along the Utah-Nevada line. Over much of this area, the glacial deposits and associated rocks thicken westward and form the basal part of a miogeoclinal wedge that accumulated near the late Proterozoic and early Paleozoic continental margin. In the east, such deposits are thin and rest on Archean basement or rocks of Proterozoic Y age; in the west, they are part of thicker sequences in which deposition apparently continued without significant interruption from late Proterozoic into Cambrian time. In many places, the original continuity between the western and eastern parts of the depositional wedge has been obscured by thrusting of Cretaceous and early Tertiary age that carried the thick basinal sequences eastward over those deposited on the continental platform. Recent mapping of Fremont Island in Great Salt Lake, the Wasatch Range between Ogden and Brigham City, and the Sheeprock Mountains shows that glacial episodes represented either by diamictite or by dropstones enclosed in finegrained laminated beds are separated by as much as 1,000 m of non-glacial deposits, including black slate, alternating graywacke and siltstone, quartzite, and conglomerate. Using reasonable sedimentation rates for such deposits and by comparison with modern analogues, we infer that two episodes of glaciation, each probably consisting of multiple advances and retreats, were separated by a non-glacial interval of a few hundred thousand to a few million years' duration. Correlation of the allochthonous, miogeoclinal glacial deposits with the single glacial unit present in autochthonous and parautochthonous platform sites is uncertain, but our interpretation of sedimentary facies and paleogeography suggests that only the younger of the two episodes recorded in the allochthon is represented by the diamictites of the autochthon.

Idaho, Utah↗
USGS1996

Metamorphism and gold mineralization in the Blue Ridge, southernmost Appalachians

Lode gold mineralization in the Blue Ridge of the southernmost Appalachians is hosted by metavolcanic rocks (e.g., Anna Howe mine, AL; Royal Vindicator mine, GA), metaplutonic rocks (e.g., Hog Mountain mine, AL), and metasedimentary rocks (e.g., Lowe, Tallapoosa, and Jones Vein mines, AL). Most gold occurs in synkinematic quartz + or - plagioclase + or - pyrite + or - pyrrhotite + or - chlorite veins localized along polydeformational faults that juxtapose rocks with significantly different peak metamorphic mineral assemblages.Mineralogy, chemistry, and O and H isotope studies suggest that the three types of host rocks have undergone differing amounts and types of alteration during mineralization. Limited wall-rock alteration in metavolcanic- and metasediment-hosted deposits, and relatively extensive wall-rock alteration in granitoid-hosted deposits, suggests that most deposits formed from fluids that were close to equilibrium with metavolcanic and metasedimentary rocks. Stable isotope compositions of the fluids calculated from vein minerals and vein selvages are consistent with a predominantly metasedimentary fluid source, but vary from deposit to deposit (-22 to -47ppm delta D, 4-5ppm, delta 18 O, and 5-7ppm delta 34 S at Anna Howe and Royal Vindicator; -48 to -50ppm delta D, 9-13ppm delta 18 O, and ca. 19ppm delta 34 S at Lowe and Jones Vein; and -22 to -23ppm delta D, 8-11ppm delta 18 O, 9-10ppm delta 34 S, and -6 delta 13 C at Hog Mountain). Silicate mineral thermobarometry of vein, vein selvage, and wall-rock mineral assemblages indicate that mineralization and regional metamorphism occured at greenschist to amphibolite facies (480 degrees + or - 75 degrees C at Anna Howe, 535 degrees + or - 50 degrees C at 6.4 + or - 1 kbars at Lowe, 530 degrees + or - 50 degrees C at 6.9 + or - 1 kbars at Tallapoosa, and 460 degrees + or - 50 degrees C at 5.5 + or - 1 kbars at Hog Mountain). Oxygen isotope fractionation between vein minerals and selvage minerals consistently records equilibration temperatures that are similar to or slightly lower than those estimated from silicate thermometry.Auriferous veins contain numerous fluid inclusions that were emplaced in several stages and can be subdivided into five compositional types based on salt and CO 2 concentrations. Fluid inclusion isochores for early formed inclusions from these veins intercept the pressure and temperature conditions estimated from silicate mineral thermobarometry and stable isotope thermometry, and are compatible with entrapment at those conditions. These fluids exhibit significant variation in salinity (X (sub NaCl equiv ) ) = 0.0-0.2) and CO 2 (X (sub CO 2 ) = 0.0-0.2), suggesting variation in fluid-wall-rock interaction that accompanied gold deposition during declining temperatures. Less abundant and later fluids within the veins are dominantly CO 2 .The association of gold mineralization with structurally controlled concordant and discordant quartz sulfide veins, and the temperatures and pressures of wall-rock alteration and regional metamorphism indicate that the present distribution of gold is a result of metamorphism during progressive D 2 -D 3 deformation. Isotopic data for alteration envelopes date this event as Alleghanian: 279 + or - 14 Ma (K-Ar whole rock) and 343 + or - 18 Ma (K-Ar biotite) at Lowe; and 315 + or - 18 Ma (Rb-Sr whole-rock isochron; 87 Sr/ 86 Sr i = 0.7061 + or - 0.0008) and 294 + or - 16 Ma (K-Ar whole-rock) at Hog Mountain. Available data are compatible with development of the lodes during early Alleghanian overthrusting of allochthons over sedimentary rocks of the autochthonous North American margin. The implication is that the fluids were derived from metasedimentary and/or metavolcanic formations in the lower parts of the crystalline thrust stack (or possibly from underlying autochthonous sedimentary formations), ascended along permeable fault zones, and were emplaced as veins into dilatent areas in and adjacent to the fault zones.

Economic Geology↗
USGS1982

Geologic map of the Wenatchee 1:100,000 Quadrangle, central Washington

The rocks and deposits within the Wenatchee quadrangle can be grouped into six generalized units: (1) Precambrian(?) Swakane Biotite Gneiss in the northeastern part of the quadrangle and the probable Jurassic low-grade metamorphic suite, mostly composed of the Easton Schist, in the southwestern part; (2) the Mesozoic Ingalls Tectonic Complex; (3) the Mesozoic Mount Stuart batholith; (4) lower and middle Tertiary nonmarine sedimentary and volcanic rocks; (5) Miocene basalt flows and interbedded epiclastic rocks constituting part of the Columbia River Basalt Group and interbedded silicic volcaniclastic rocks of the Ellensburg Formation; and (6) Pliocene to Holocene alluvium, glacial, flood, and mass-wastage deposits.

IMAP↗
USGS1994

Reconnaissance geologic map of the Sliderock Mountain area, Sweet Grass and Stillwater counties, Montana

The remains of a deeply eroded Late Cretaceous stratovolcano centered near Sliderock Mountain dominate the map area. The volcano consists mostly of lahars, although basaltic andesite lava flows are also present. An extensively eroded, weakly mineralized hypabyssal intrusive complex, inferred to represent the volcano's solidified magma chamber, intrudes previously erupted lava flows and associated lahars. Cretaceous sandstone and shale and Paleozoic sedimentary rocks, principally limestone of the Madison Group, host the stratovolcano; remnants of these rocks are preserved as large xenoliths and roof pendants.

Montana↗
USGS2006

Geological interpretation of bathymetric and backscatter imagery of the sea floor off eastern Cape Cod, Massachusetts

The imagery, interpretive data layers, and data presented herein were derived from multibeam echo-sounder data collected off Eastern Cape Cod, Massachusetts, and from the stations occupied to verify these acoustic data. The basic data layers show sea-floor topography, sun-illuminated shaded relief, and backscatter intensity; interpretive layers show the distributions of surficial sediment and sedimentary environments. Presented verification data include new and historical sediment grain-size analyses and a gallery of still photographs of the seabed. The multibeam data, which cover a narrow band of the sea floor extending from Provincetown around the northern tip of Cape Cod and south southeastward to off Monomoy Island, were collected during transits between concurrent mapping projects in the Stellwagen Bank National Marine Sanctuary (Valentine and others, 2001; Butman and others, 2004; and Valentine, 2005) and Great South Channel (Valentine and others, 2003a, b, c, d). Although originally collected to maximize the use of time aboard ship, these data provide a fundamental framework for research and management activities in this part of the Gulf of Maine (Noji and others, 2004), show the composition and terrain of the seabed, and provide information on sediment transport and benthic habitat. These data and interpretations also support ongoing modeling studies of the lower Cape’s aquifer system (Masterson, 2004) and of erosional hotspots along the Cape Cod National Seashore (List and others, 2006).

Massachusetts↗
USGS2008

Geologic framework of the 2005 Keathley Canyon gas hydrate research well, northern Gulf of Mexico

The Keathley Canyon sites drilled in 2005 by the Chevron Joint Industry Project are located along the southeastern edge of an intraslope minibasin (Casey basin) in the northern Gulf of Mexico at 1335 m water depth. Around the drill sites, a grid of 2D high-resolution multichannel seismic data designed to image depths down to at least 1000 m sub-bottom reveals 7 unconformities and disconformities that, with the seafloor, bound 7 identifiable seismic stratigraphic units. A major disconformity in the middle of the units stands out for its angular baselapping geometry. From these data, three episodes of sedimentary deposition and deformation are inferred. The oldest episode consists of fine-grained muds deposited during a period of relative stability in the basin (units e, f, and g). Both the BSR and inferred gas hydrate occur within these older units. The gas hydrate occurs in near-vertical fractures. A second episode (units c and d) involved large vertical displacements associated with infilling and ponding of sediment. This second interval corresponds to deposition of intercalated fine and coarse-grained material that was recovered in the drill hole that penetrated the thin edges of the regionally much thicker units. The final episode of deposition (units a and b) occurred during more subdued vertical motions. Hemipelagic drape (unit a) characterizes the modern seafloor. The present-day Casey basin is mostly filled. Its sill is part of a subsiding graben structure that is only 10-20 m shallower than the deepest point in the basin, indicating that gravity-driven transport would mostly bypass the basin. Contemporary faulting along the basin margins has selectively reactivated an older group of faults. The intercalated sand and mud deposits of units c and d are tentatively correlated with Late Pleistocene deposition derived from the western shelf-edge delta/depocenter of the Mississippi River, which was probably most active from 320 ka to 70 ka [Winker, C.D., Booth, J., 2000. Sedimentary dynamics of the salt-dominated continental slope, Gulf of Mexico: integration of observations from the seafloor, near-surface, and deep subsurface. In: Proceedings of the GCSSEPM Foundation 20th Annual Research Conference, Deep-water Reservoirs of the World, pp. 1059-1086]. The presence of sand within the gas hydrate stability zone (in units c and d) is not sufficient to concentrate gas hydrate even though dispersed gas hydrate occurs deeper in the fractured mud/clay-rich sections of units e and f.

Gulf of Mexico↗
USGS2024

Hydrologic investigations and a preliminary conceptual model of the groundwater system at North Penn Area 1 Superfund Site, Souderton, Montgomery County, Pennsylvania

The U.S. Geological Survey (USGS) conducted hydrogeologic investigations, reviewed existing data, and developed a preliminary conceptual model of the groundwater system as part of technical support of the U.S. Environmental Protection Agency (EPA) at the North Penn Area 1 Superfund Site (hereafter, the NP1 Site) located within the Borough of Souderton in Montgomery County, Pennsylvania. Field work and monitoring took place during 2012–18. The area is underlain by sedimentary formations that form a fractured-rock aquifer used for drinking water and industrial supply. The EPA placed the Site on the National Priorities List in 1989, identifying tetrachloroethylene (PCE) and trichloroethylene (TCE) as contaminants of concern. During 2012–18, the USGS conducted field activities that included drilling an 82-foot (ft)-deep monitoring well (MG 2220) in 2016, reconstructing a 208-ft-deep former industrial production well (MG 668 [Granite Knitting Mill]), and collecting borehole geophysical and video logs and water levels from those and five additional wells, which ranged in depth from about 50 to 200 ft below land surface. Continuous water levels were collected during 2014–17, and a synoptic set of water levels were measured in April 2018 in the seven wells. The borehole geophysical logs (caliper, acoustic televiewer, natural gamma, single-point resistance, vertical flow, and fluid temperature and resistivity) and borehole video logs in the seven wells were evaluated to assess potential for lithologic correlation and to identify and describe water-bearing features, which included both low- and high-angle fractures and other openings oriented along dipping bedding planes, joints, or possible faults. Borehole geophysical logs collected by USGS in 1992 in a 300-ft-deep former production well near the Site were also evaluated. Few to no distinctive features were identified on geophysical logs (natural gamma and single-point resistance) that could be used for correlation, thus limiting this approach to determining local geologic structure. Extensive fracturing in the upper 62 ft of monitoring well MG 2220 indicates that the well was likely drilled through a zone of faulting, and other evidence of faulting is present in the area near the Site. Assessment of continuous water levels showed hydraulic connections among some wells as indicated by rising or falling water levels in response to changes in pumping rates at nearby wells. A map of water levels measured in April 2018 indicates potential for groundwater flow generally toward the stream to the south and southwest of the Site, but the limited water-level data are insufficient to describe vertical groundwater gradients or lateral gradients in any detail. Review of 1999–2022 volatile organic compound (VOC) monitoring data collected by the Pennsylvania Department of Environmental Protection for five monitoring wells indicates that the highest groundwater concentrations of PCE and TCE were found in samples from extraction well MG 2201 (S-1) downgradient from, and nearest to, the previously identified Site contaminant source area, and these concentrations fluctuated through time. PCE concentrations were higher than TCE concentrations in samples from all five monitoring wells and were much higher than TCE concentrations in samples from extraction well MG 2201 (S-1). Temporally variable recharge is a possible factor affecting observed fluctuations in PCE concentrations in groundwater samples from well extraction MG 2201 (S-1), as indicated by a general inverse relation between PCE concentrations and water levels in a nearby long-term observation well. The PCE concentration of 1,830 micrograms per liter (μg/L) in a May 2018 water sample from monitoring well MG 2220 was more than four times the PCE concentration of 444 μg/L in a December 2017 sample from the nearby extraction well MG 2201 (S-1), which is open to fewer fractures. Low concentrations of VOCs were measured in surface water at two stream sites downgradient from wells with the highest groundwater VOC concentrations at the Site, indicating that discharge of contaminated groundwater to the stream is likely. Development of a conceptual model of the groundwater system was constrained by limited data. In areas with no pumping, groundwater-flow directions generally are thought to be controlled by topography and geologic structure (bedding orientation) and likely to the south and southwest of the Site, with local flow directions affected by orientations of fractures, joints, and local faults. Additional investigations that could help improve the conceptual model of the groundwater system and help delineate the extent of groundwater contamination and its transport are discussed.

Pennsylvania↗
USGS2010

The sedimentology and dynamics of crater-affiliated wind streaks in western Arabia Terra, Mars and Patagonia, Argentina

Wind streaks comprise recent aeolian deposits that have been extensively documented on Venus, Earth and Mars. Martian wind streaks are among the most abundant surface features on the planet and commonly extend from the downwind margins of impact craters. Previous studies of wind streaks emerging from crater interior deposits suggested that the mode of emplacement was primarily related to the deposition of silt-sized particles as these settled from plumes. We have performed geologic investigations of two wind streaks clusters; one situated in western Arabia Terra, a region in the northern hemisphere of Mars, and another in an analogous terrestrial site located in southern Patagonia, Argentina, where occurrences of wind streaks emanate from playas within maar craters. In both these regions we have identified bedforms in sedimentary deposits on crater floors, along wind-facing interior crater margins, and along wind streaks. These observations indicate that these deposits contain sand-sized particles and that sediment migration has occurred via saltation from crater interior deposits to wind streaks. In Arabia Terra and in Patagonia wind streaks initiate from crater floors that contain lithic and evaporitic sedimentary deposits, suggesting that the composition of wind streak source materials has played an important role in development. Spatial and topographic analyses suggest that regional clustering of wind streaks in the studied regions directly correlates to the areal density of craters with interior deposits, the degree of proximity of these deposits, and the craters' rim-to-floor depths. In addition, some (but not all) wind streaks within the studied clusters have propagated at comparable yearly (Earth years) rates. Extensive saltation is inferred to have been involved in its propagation based on the studied terrestrial wind streak that shows ripples and dunes on its surface and the Martian counterpart changes orientation toward the downslope direction where it extends into an impact crater. ?? 2009 Elsevier B.V.

Geomorphology↗