Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Rock Products”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68Linked to original sources
USGS1988

Natural aggregates of the conterminous United States

Crushed stone and sand and gravel are the two main sources of natural aggregates. These materials are commonly used construction materials and frequently can be interchanged with one another. They are widely used throughout the United States, with every State except two producing crushed stone. Together they amount to about half the mining volume in the United States. Approximately 96 percent of sand and gravel and 77 percent of the crushed stone produced in the United States are used in the construction industry. Natural aggregates are widely distributed throughout the United States in a variety of geologic environments. Sand and gravel deposits commonly are the results of the weathering of bedrock and subsequent transportation and deposition of the material by water or ice (glaciers). As such, they commonly occur as river or stream deposits or in glaciated areas as glaciofluvial and other deposits. Crushed stone aggregates are derived from a wide variety of parent bedrock materials. Limestone and other carbonates account for approximately three quarters of the rocks used for crushed stone, with granite and other igneous rocks making up the bulk of the remainder. Limestone deposits are widespread throughout the Central and Eastern United States and are scattered in the West. Granites are widely distributed in the Eastern and Western United States, with few exposures in the Midwest. Igneous rocks (excluding granites) are largely concentrated in the Western United States and in a few isolated localities in the East. Even though natural aggregates are widely distributed throughout the United States, they are not universally available for consumptive use. Some areas are devoid of sand and gravel, and potential sources of crushed stone may be covered with sufficient unconsolidated material to make surface mining impractical. In some areas many aggregates do not meet the physical property requirements for certain uses, or they may contain mineral constituents that react adversely when used as concrete aggregate. In areas where suitable natural aggregate is not available or accessible, it may become necessary to improve the quality of existing aggregate, to import aggregate from outside the area, or to substitute artificial aggregate for natural aggregate. In most cases, all of these alternatives add substantially to the cost of the final product. Even though an area may be blessed with an abundance of aggregate suitable for the intended purpose, existing land uses, zoning, or regulations may preclude commercial exploitation of the aggregate. This report also discusses the aggregate industry in general terms, including exploration, mining, and processing, as well as aggregate production rates. Proper long-range planning based on an understanding of the aggregate industry can help assure adequate supplies of aggregate.

conterminous United States↗
USGS2015

California State Waters Map Series — Drakes Bay and vicinity, California

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Drakes Bay and Vicinity map area is located in northern California, about 30 km north of San Francisco and about 65 km south of Fort Ross. The map area is in the northern part of the Gulf of the Farallones National Marine Sanctuary, and it includes all or parts of four California Marine Protected Areas. The largely undeveloped onshore part of the map area, which occupies much of the southern and southeastern parts of the Point Reyes peninsula, is used primarily for grazing, as well as recreation, as it is home to the Point Reyes National Seashore. The triangular Point Reyes peninsula, which lies completely west of the San Andreas Fault Zone, is bounded by the steep terrain of Inverness Ridge along its northeastern margin, Tomales Point at its northernmost tip, Point Reyes at its southwesternmost point, and Bolinas at its southern end. The landscape in between includes (from southeast to northwest) the sandy beaches along Drakes Bay, the estuaries of Drakes Estero and Estero de Limantour, and the long, windswept Point Reyes Beach, which is backed by an extensive dune field. The seafloor in the map area generally extends from the shoreline to water depths of about 40 to 50 m, except for the area south of the Point Reyes headland where water depths reach 60 to 70 m. This bathymetric gradient south and west of the Point Reyes headland is related to north-side-up motion along the Point Reyes Fault Zone. Except for the bathymetric gradient across the Point Reyes Fault Zone, the bedrock platform in the nearshore and inner shelf areas (50 to 60 m depth) is relatively flat (less than 1.0°) and is overlain by sand-sized to coarser grained sediment. Finer grained sediments are found in water depths greater than 60 m south of the Point Reyes headland, but they also extend into shallower (less than 40 m) water within Drakes Bay. Surficial and shallow sediments were deposited in the last about 21,000 years during the approximately 125-m sea-level rise that followed the last major lowstand associated with the Last Glacial Maximum, at which time the entire Drakes Bay and Vicinity map area was emergent and the shoreline was about 30 km south and west of the present-day shoreline. Tectonic influences that impact the shelf morphology and geology in the map area are related to local faulting, folding, uplift, and subsidence. Offshore of the Point Reyes headland, granitic basement rocks are offset vertically about 1.4 km along the Point Reyes Fault Zone; this uplift, combined with west-side-up offset on the San Andreas Fault Zone, has resulted in uplift of the Point Reyes peninsula and the adjacent shelf. Late Pleistocene uplift of marine terraces on the southern Point Reyes peninsula suggests active deformation of offshore structures west of the San Andreas Fault Zone. Pervasive stratal thinning within inferred uppermost Pliocene and Pleistocene deposits above the west strand of the Point Reyes Fault Zone suggests Quaternary active shortening of the curvilinear, northeast- to north-dipping Point Reyes Fault Zone. Lack of clear deformation in the uppermost Pleistocene and Holocene deposits suggests that activity along the Point Reyes Fault Zone has ceased or slowed since about 21,000 years ago. Seafloor habitats in the Drakes Bay and Vicinity map area range from unconsolidated continental-shelf sediment to hard substrate. Rocky-shelf outcrops and rubble are considered to be promising potential habitats for rockfish and lingcod, both of which are recreationally and commercially important species. Circulation over the continental shelf in the map area is dominated by the southward-flowing California Current, the eastern limb of the North Pacific Gyre. Associated upwelling brings cool, nutrient-rich waters to the surface, resulting in high biological productivity. The current flow generally is southeastward during the spring and summer; however, during the fall and winter, the otherwise persistent northwest winds are sometimes weak or absent, causing the California Current to move farther offshore and the Davidson Current, a weaker, northward-flowing countercurrent, to become active. Sediment transport in the map area largely is controlled by surface waves and tidal currents in the nearshore and, at depths greater than 20 to 30 m, by tidal and subtidal currents. In the map area, nearshore littoral drift of sand and coarse sediment is to the south, owing to the dominant west-northwest swell direction, and scour from large waves and tidal currents removes and redistributes sediment over large areas of the inner shelf. Tidal currents are particularly strong over the shelf in the map area, and they dominate the current regime in the nearshore. Further offshore, bottom currents generally flow to the northwest, distributing finer grained sediment accordingly.

California↗
USGS2007

Geologic Map of Oasis Valley Spring-Discharge Area and Vicinity, Nye County, Nevada

This map report presents the geologic framework of an area in southern Nye County, Nevada, that extends from the southern limit of the Oasis Valley spring-discharge site, northeastward to the southwest margin of the Pahute Mesa testing area, on the Nevada Test Site. This map adds new surficial mapping and revises bedrock mapping previously published as USGS Open-File Report 99-533-B. The locations of major concealed structures were based on a combination of gravity and magnetic data. This report includes a geologic discussion explaining many of the interpretations that are presented graphically on the map and sections. Additional discussion of the geologic framework of the Oasis Valley area can be found in an interpretive geophysical report and in a geologic report (USGS Open-File Report 99-533-A that was a companion product to the previously published version of this map. The map presented here covers nine 7.5-minute quadrangles centered on the Thirsty Canyon SW quadrangle. It is a compilation of one previously published quadrangle map and eight new quadrangle maps, two of which were published separately during the course of the study. The new bedrock mapping was completed by S.A. Minor from 1991 to 1995, by C.J. Fridrich from 1992 to 1998, and by P.L. Ryder from 1997 to 1998. New surficial-deposits mapping was completed by J.L. Slate and M.E. Berry in 1998 and 1999. The new bedrock and surficial mapping is partly a revision of several unpublished reconnaissance maps completed by Orkild and Swadley in the 1960's, and of previously published maps by Maldonado and Hausback (1990), Lipman and others (1966); and Sargent and Orkild (1976). Additionally, mapping of the pre-Tertiary rocks of northern Bare Mountain was compiled from Monsen and others (1992) with only minor modification. The cross sections were drawn to a depth of about 5 km below land surface at the request of hydrologists studying the Death Valley ground-water system. Below a depth of about 1 kilometer, surface constraints offer only faint guidance, and the deep interpretations shown are constrained primarily by geophysical data, and are model-dependent. The estimated thickness of the Tertiary volcanic and sedimentary strata is shown on the cross sections with an overlain blue line, which has a very rounded form because it was modeled from gravity data. Several small faults that appear on the map were omitted from the cross sections for the sake of clarity. Within the Oasis Valley basin alone, the pattern of domino-style faulting shown on the cross sections is based on an interpretation of aeromagnetic data, but is strictly schematic.

Scientific Investigations Map↗
USGS2018

Titanium mineral resources in heavy-mineral sands in the Atlantic coastal plain of the southeastern United States

This study examined titanium distribution in the Atlantic Coastal Plain of the southeastern United States; the titanium is found in heavy-mineral sands that include the minerals ilmenite (Fe 2+ TiO 3 ), rutile (TiO 2 ), or leucoxene (an alteration product of ilmenite). Deposits of heavy-mineral sands in ancient and modern coastal plains are a significant feedstock source for the titanium dioxide pigments industry. Currently, two heavy-mineral sands mining and processing operations are active in the southeast United States producing concentrates of ilmenite-leucoxene, rutile, and zircon. The results of this study indicate the potential for similar deposits in many areas of the Atlantic Coastal Plain. This study used the titanium analyses of 3,457 stream sediment samples that were analyzed as part of the U.S. Geological Survey’s National Geochemical Survey program. This data set was analyzed by an integrated spatial modeling technique known as Bayesian hierarchical modeling to map the regional-scale, spatial distribution of titanium concentrations. In particular, clusters of anomalous concentrations of titanium occur: (1) along the Fall Zone, from Virginia to Alabama, where metamorphic and igneous rocks of the Piedmont region contact younger sediments of the Coastal Plain; (2) a paleovalley near the South Carolina and North Carolina border; (3) the upper and middle Atlantic Coastal Plain of North Carolina; (4) the majority of the Atlantic Coastal Plain of Virginia; and (5) barrier islands and stretches of the modern shoreline from South Carolina to northeast Florida. The areas mapped by this study could help mining companies delimit areas for exploration.

Scientific Investigations Report↗
USGS1961

Geologic features and ground-water storage capacity of the Sacramento Valley, California

The Sacramento Valley constitutes the northern and smaller arm of the Central Valley of California. It is about 150 miles long by about 30 miles wide; and its area is about 5,000 square miles. The Sacramento Valley is drained by the Sacramento River, the largest in California, which rises west of Mount Shasta and flows southward to join the San Joaquin River near Suisun Bay and discharges through San Francisco Bay to the Pacific. Most of the valley floor is suitable for growing crops, and under irrigation the land is highly productive. The Sacramento Valley is underlain by sediments transported from the surrounding mountains by the Sacramento River and its tributaries. The floor of the valley slopes southward from about 300 feet above sea level at the north end near Red Bluff to sea level at Suisun Bay. The Sutter Buttes, which are erosional remnants of an old volcano rise to 2,132 feet above sea level near the center of the valley. The valley floor is not a featureless plain but is characterized by various types of topography, which have been assigned to four principal groups: 1, low hills and dissected alluvial uplands; 2, low alluvial plains and fans; 3, flood plains and natural levees; and 4, flood basins; a fifth and relatively minor group consists of the tidal Islands of the Sacramento-San Joaquin Delta, which are south of the principal area of investigation. The rocks that underlie the Sacramento Valley and the bordering mountains range from crystalline rocks of Paleozoic and Mesozoic age to unconsolidated alluvium of Recent age. These rocks have been subdivided into 20 geologic units which may be assigned to 2 broad categories: rocks that yield little water and rocks that yield water freely. The rocks of the first category are chiefly marine sedimentary rocks of Late Jurassic, Cretaceous, and Early Tertiary age and a basement complex of pre-Tertiary crystalline rocks. The rocks of the second category consist predominantly of nonmarine valley-filling sediments of late Tertiary and Quaternary age, which constitute the principal ground-water reservoir in the Sacramento Valley. The rocks that yield little or no water includes the following geologic units: 1, Basement complex of the Sierra Nevada (pre-Tertiary); 2, Shasta series (Lower Cretaceous); 3, Chico formation (Upper Cretaceous); 4, Paleocene series; 5, Eocene series (in part, water yielding); 6, basalt (Tertiary); 7, sedimentary rocks of volcanic origin on the west side of the Sacramento Valley (Tertiary, in part water yielding) ; 8, intrusive rhyolite and andesite and vent tuff of the Sutter Buttes (Pliocene); and 9, tuff-breccia of the Sutter Buttes (Pliocene, in part water yielding). The rocks that yield water freely, comprises the following geologic units: 1, Volcanic rocks from the Sierra Nevada (Eocene to Pliocene; in part yield little or no water); 2, Tuscan formation (Pliocene; in part yield little or no water); 3, Tehama formation (Pliocene); 4, Tehama formation and related continental sediments, undifferentiated (Pliocene and Pleistocene); 5, Laguna formation and related continental sediments (Pliocene and Pleistocene); 6, fanglomerate from the Cascade Range (Pleistocene); 7, Red Bluff formation (Pleistocene); 8, Victor formation and related deposits (Pleistocene); 9, alluvial-fan deposits (Pleistocene and Recent); 10, river deposits (Recent); and 11, flood-basin deposits (Recent). The volcanic rocks from the Sierra Nevada consist chiefly of andesitic and rhyolitic detritus. Most of these volcanic rocks are fragmental and were deposited either as mudflows or by streams. Their permeability is extremely variable, the poorly consolidated sandstone and conglomerate strata locally yield water copiously to wells, but the interbedded fine-grained and cemented strata are virtually impermeable and act as confining layers. The Tuscan formation, which occurs in the northeastern part of the valley, consists of fragmental andesitic and basaltic mate

Water Supply Paper↗
USGS2004

Geochemical characterization of tarballs on beaches along the California coast. Part I - Shallow seepage impacting the Santa Barbara Channel Islands, Santa Cruz, Santa Rosa and San Miguel

Tarballs are common along the southern California coastline. This study investigates tarballs from beaches along this coastline, with a focus on Santa Cruz, Santa Rosa, and San Miquel Islands in the Santa Barbara Channel. The tarballs were fingerprinted using biomarker and stable carbon isotope parameters, and then grouped according to genetic similarities. The data show that the tarballs are of natural and not anthropogenic origin and that all originate from source rock within the Miocene Monterey Formation via shallow seeps offshore. Sterane biomarker parameters were found to vary widely in the sample set. Biodegradation, especially of the regular steranes, is the primary process impacting the biomarker distributions in a large group of samples. The most common tarball occurrences appear to come from offshore seepage near the west end of Santa Cruz Island. Another major group most likely was transported north from near Santa Monica Bay. Several individual occurrences of some of these tarball groups also were found on beaches as far north as Pt. Reyes and as far south as San Diego, indicating significant long-distance dispersal by ocean currents. This study begins a library of tarball fingerprints to be used as a database to help distinguish between natural and anthropogenic tar occurrences all along the California coast, and to compare shallow seepage with future samples of deeper production oils from the same area.

Organic Geochemistry↗
USGS2011

Geochemical analysis of Atlantic rim water, Carbon County, Wyoming: New applications for characterizing coalbed natural gas reservoirs

Coalbed natural gas (CBNG) production typically requires the extraction of large volumes of water from target formations, thereby influencing any associated reservoir systems. We describe isotopic tracers that provide immediate data on the presence or absence of biogenic natural gas and the identify methane-containing reservoirs are hydrologically confined. Isotopes of dissolved inorganic carbon and strontium, along with water quality data, were used to characterize the CBNG reservoirs and hydrogeologic systems of Wyoming’s Atlantic Rim. Water was analyzed from a stream, springs, and CBNG wells. Strontium isotopic composition and major ion geochemistry identify two groups of surface water samples. Muddy Creek and Mesaverde Group spring samples are Ca-Mg-SO4–type water with higher 87Sr/86Sr, reflecting relatively young groundwater recharged from precipitation in the Sierra Madre. Groundwaters emitted from the Lewis Shale springs are Na-HCO3–type waters with lower 87Sr/86Sr, reflecting sulfate reduction and more extensive water-rock interaction. To distinguish coalbed waters, methanogenically enriched d13CDIC was used from other natural waters. Enriched d13CDIC, between −3.6 and +13.3‰, identified spring water that likely originates from Mesaverde coalbed reservoirs. Strongly positive d13CDIC, between +12.6 and +22.8‰, identified those coalbed reservoirs that are confined, whereas lower d13CDIC, between +0.0 and +9.9‰, identified wells within unconfined reservoir systems

Wyoming↗
USGS2003

Stratigraphy and palaeoclimatic significance of Late Quaternary loess-palaeosol sequences of the Last Interglacial-Glacial cycle in central Alaska

Loess is one of the most widespread subaerial deposits in Alaska and adjacent Yukon Territory and may have a history that goes back 3 Ma. Based on mineralogy and major and trace element chemistry, central Alaskan loess has a composition that is distinctive from other loess bodies of the world, although it is quartz-dominated. Central Alaskan loess was probably derived from a variety of rock types, including granites, metabasalts and schists. Detailed stratigraphic data and pedologic criteria indicate that, contrary to early studies, many palaeosols are present in central Alaskan loess sections. The buried soils indicate that loess sedimentation was episodic, or at least rates of deposition decreased to the point where pedogenesis could keep ahead of aeolian input. As in China, loess deposition and pedogenesis are likely competing processes and neither stops completely during either phase of the loess/soil formation cycle. Loess deposition in central Alaska took place before, and probably during the last interglacial period, during stadials of the mid-Wisconsin period, during the last glacial period and during the Holocene. An unexpected result of our geochronological studies is that only moderate loess deposition took place during the last glacial period. Our studies lead us to conclude that vegetation plays a key role in loess accumulation in Alaska. Factors favouring loess production are enhanced during glacial periods but factors that favour loess accumulation are diminished during glacial periods. The most important of these is vegetation; boreal forest serves as an effective loess trap, but sparsely distributed herb tundra does not. Thus, thick accumulations of loess should not be expected where tundra vegetation was dominant and this is borne out by modern studies near the treeline in central Alaska. Much of the stratigraphic diversity of North American loess, including that found in the Central Lowlands, the Great Plains, and Alaska is explained by a new model that emphasizes the relative importance of loess production factors versus loess accumulation factors.

Quaternary Science Reviews↗
USGS2004

Petroleum geology and resources of the Amu-Darya basin, Turkmenistan, Uzbekistan, Afghanistan, and Iran

The Amu-Darya basin is a highly productive petroleum province in Turkmenistan and Uzbekistan (former Soviet Union), extending southwestward into Iran and southeastward into Afghanistan. The basin underlies deserts and semideserts north of the high ridges of the Kopet-Dag and Bande-Turkestan Mountains. On the northwest, the basin boundary crosses the crest of the Karakum regional structural high, and on the north the basin is bounded by the shallow basement of the Kyzylkum high. On the east, the Amu-Darya basin is separated by the buried southeast spur of the Gissar Range from the Afghan-Tajik basin, which is deformed into a series of north-south-trending synclinoria and anticlinoria. The separation of the two basins occurred during the Neogene Alpine orogeny; earlier, they were parts of a single sedimentary province. The basement of the Amu-Darya basin is a Hercynian accreted terrane composed of deformed and commonly metamorphosed Paleozoic rocks. These rocks are overlain by rift grabens filled with Upper Permian-Triassic rocks that are strongly compacted and diagenetically altered. This taphrogenic sequence, also considered to be a part of the economic basement, is overlain by thick Lower to Middle Jurassic, largely continental, coal-bearing rocks. The overlying Callovian-Oxfordian rocks are primarily carbonates. A deep-water basin surrounded by shallow shelves with reefs along their margins was formed during this time and reached its maximum topographic expression in the late Oxfordian. In Kimmeridgian-Tithonian time, the basin was filled with thick evaporites of the Gaurdak Formation. The Cretaceous-Paleogene sequence is composed chiefly of marine clastic rocks with carbonate intervals prominent in the Valanginian, Barremian, Maastrichtian, and Paleocene stratigraphic units. In Neogene time, the Alpine orogeny on the basin periphery resulted in deposition of continental clastics, initiation of new and rejuvenation of old faults, and formation of most structural traps. A single total petroleum system is identified in the Amu-Darya basin. The system is primarily gas prone. Discovered gas reserves are listed by Petroconsultants (1996) at about 230 trillion cubic feet, but recent discoveries and recent reserve estimates in older fields should increase this number by 40 to 50 trillion cubic feet. Reserves of liquid hydrocarbons (oil and condensate) are comparatively small, less than 2 billion barrels. Most of the gas reserves are concentrated in two stratigraphic intervals, Upper Jurassic carbonates and Neocomian clastics, each of which contains about one-half of the reserves. Reserves of other stratigraphic units?from Middle Jurassic to Paleogene in age?are relatively small. Source rocks for the gas are the Lower to Middle Jurassic clastics and coal and Oxfordian basinal black shales in the east-central part of the basin. The latter is probably responsible for the oil legs and much of the condensate in gas pools. Throughout most of the basin both source-rock units are presently in the gas-window zone. Traps are structural, paleogeomorphic, and stratigraphic, as well as a combination of these types. The giant Dauletabad field is in a combination trap with an essential hydrodynamic component. Four assessment units were identified in the total petroleum system. One unit in the northeastern, northern, and northwestern marginal areas of the basin and another in the southern marginal area are characterized by wide vertical distribution of hydrocarbon pools in Middle Jurassic to Paleocene rocks and the absence of the salt of the Gaurdak Formation. The other two assessment units are stratigraphically stacked; they occupy the central area of the basin and are separated by the regional undeformed salt seal of the Gaurdak Formation. The largest part of undiscovered hydrocarbon resources of the Amu-Darya basin is expected in older of these assessment units. The mean value of total assessed resources of the Amu-Darya basin is estimated

Bulletin↗
USGS2001

Geologic map and digital database of the Porcupine Wash 7.5 minute Quadrangle, Riverside County, southern California

This data set maps and describes the geology of the Porcupine Wash 7.5 minute quadrangle, Riverside County, southern California. The quadrangle, situated in Joshua Tree National Park in the eastern Transverse Ranges physiographic and structural province, encompasses parts of the Hexie Mountains, Cottonwood Mountains, northern Eagle Mountains, and south flank of Pinto Basin. It is underlain by a basement terrane comprising Proterozoic metamorphic rocks, Mesozoic plutonic rocks, and Mesozoic and Mesozoic or Cenozoic hypabyssal dikes. The basement terrane is capped by a widespread Tertiary erosion surface preserved in remnants in the Eagle and Cottonwood Mountains and buried beneath Cenozoic deposits in Pinto Basin. Locally, Miocene basalt overlies the erosion surface. A sequence of at least three Quaternary pediments is planed into the north piedmont of the Eagle and Hexie Mountains, each in turn overlain by successively younger residual and alluvial deposits. The Tertiary erosion surface is deformed and broken by north-northwest-trending, high-angle, dip-slip faults and an east-west trending system of high-angle dip- and left-slip faults. East-west trending faults are younger than and perhaps in part coeval with faults of the northwest-trending set. The Porcupine Wash database was created using ARCVIEW and ARC/INFO, which are geographical information system (GIS) software products of Envronmental Systems Research Institute (ESRI). The database consists of the following items: (1) a map coverage showing faults and geologic contacts and units, (2) a separate coverage showing dikes, (3) a coverage showing structural data, (4) a scanned topographic base at a scale of 1:24,000, and (5) attribute tables for geologic units (polygons and regions), contacts (arcs), and site-specific data (points). The database, accompanied by a pamphlet file and this metadata file, also includes the following graphic and text products: (1) A portable document file (.pdf) containing a navigable graphic of the geologic map on a 1:24,000 topographic base. The map is accompanied by a marginal explanation consisting of a Description of Map and Database Units (DMU), a Correlation of Map and Database Units (CMU), and a key to point-and line-symbols. (2) Separate .pdf files of the DMU and CMU, individually. (3) A PostScript graphic-file containing the geologic map on a 1:24,000 topographic base accompanied by the marginal explanation. (4) A pamphlet that describes the database and how to access it. Within the database, geologic contacts , faults, and dikes are represented as lines (arcs), geologic units as polygons and regions, and site-specific data as points. Polygon, arc, and point attribute tables (.pat, .aat, and .pat, respectively) uniquely identify each geologic datum and link it to other tables (.rel) that provide more detailed geologic information.

California↗
USGS2019

Geology of the Mineral and Lake Anna West Quadrangles, Virginia

This map product is a cooperator series publication and, as such, does not have a specific abstract. Geologic mapping for this map product was completed between 2014 and 2017, with most of the field work occurring between January 2016 and May 2017. Numerous foot traverses were completed along creeks and roads throughout the field area; the shore of Lake Anna was accessed by kayak to provide additional data. Distributions of soil units were considered when assigning bedrock type in areas where outcrop was lacking and helped to distinguish fluvial terrace deposits. Hill-shade raster images created from LiDAR datasets and geophysical data sets proved useful in the field to trace bedrock and surficial units. GPS location control and field data were collected and recorded in digital databases using a variety of geologic mapping applications for an iPad 3rd Gen Model A1403 and Motion C5v tablet using Fieldmove 2013.1. Structural measurements were also plotted on field maps. Data collected included lithology and the orientation of foliations, folds, lineations, joints, and faults. Representative rock samples of significant formations were thin-sectioned for petrographic analysis; a few samples from these and surrounding quadrangles were analyzed for zircon U-Pb geochronology and geochemistry.

Virginia↗
USGS2003

Production waters associated with the Ferron coalbed methane fields, central Utah: Chemical and isotopic composition and volumes

This study investigated the composition of water co-produced with coalbed methane (CBM) from the Upper Cretaceous Ferron Sandstone Member of the Mancos Shale in east-central Utah to better understand coalbed methane reservoirs. The Ferron coalbed methane play currently has more than 600 wells producing an average of 240 bbl/day/well water. Water samples collected from 28 wellheads in three fields (Buzzards Bench, Drunkards Wash, and Helper State) of the northeast-southwest trending play were analyzed for chemical and stable isotopic composition.Water produced from coalbed methane wells is a Na-Cl-HCO3 type. Water from the Drunkards Wash field has the lowest total dissolved solids (TDS) (6300 mg/l) increasing in value to the southeast and northeast. In the Helper State field, about 6 miles northeast, water has the highest total dissolved solids (43,000 mg/l), and major ion abundance indicates the possible influence of evaporite dissolution or mixing with a saline brine. In the southern Buzzards Bench field, water has variable total dissolved solids that are not correlated with depth or spatial distance. Significant differences in the relative compositions are present between the three fields implying varying origins of solutes and/or different water-rock interactions along multiple flow paths.Stable isotopic values of water from the Ferron range from +0.9??? to -11.4??? ?? 18O and -32??? to -90??? ?? 2H and plot below the global meteoric water line (GMWL) on a line near, but above values of present-day meteoric water. Isotopic values of Ferron water are consistent with modification of meteoric water along a flow path by mixing with an evolved seawater brine and/or interaction with carbonate minerals. Analysis of isotopic values versus chloride (conservative element) and total dissolved solids concentrations indicates that recharge water in the Buzzards Bench area is distinct from recharge water in Drunkards Wash and is about 3 ??C warmer. These variations in isotopes along with compositional variations imply that the Ferron reservoir is heterogeneous and compartmentalized, and that multiple flow paths may exist. ?? 2003 Published by Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗
USGS1941

Subsurface geology and oil and gas resources of Osage County, Oklahoma. Part 8, Parts of township 20 north, ranges 9 and 10 east, and township 21 north, ranges 8 and 9 east and all of township 21 north, range 10 east

The area whose subsurface geology and oil and gas resources are described in this report lies along the southern border of Osage County, Okla., and includes parts of T. 20 N., Rs. 9 and 10 E., and of T. 21 N., Rs. 8 and 9 E., and all of T. 21 N., R. 10 E. The towns of Osage and Prue are within the area; Cleveland, which is a mile south of the Arkansas River, is not far beyond its southwestern limit; and Tulsa is 10 miles east of its southeast corner. The production of oil and gas from the many fields in the five townships began as early as 1905, and drilling has continued up to the present. Oil or gas is produced from 13 zones at depths ranging from 250 to 2,600 feet. Of these zones, one is in the Ordovician system, one is at the contact of the Mississippian and the Pennsylvanian series, and all others are in the Pennsylvanian series. The five townships lie within a region that contains many oil and gas fields in the Bartlesville sand; the Red Fork sand is oil-bearing in a narrow belt in T. 21 N., R. 8 E.; and oil and gas are produced in small areas from the Taneha, Skinner, Squirrel, Cleveland, Jones, and Layton sands, the Mussehem and Peoples sand zone, the Okesa, Torpedo, and Clem Creek sand zone, and the Big lime and Peru sand zone. The rocks dip westward across the five townships at an average rate of about 38 feet to the mile as measured on the top of the Oswego lime. This regional dip is interrupted, however, by many anticlines, domes, synclines, and structural basins. The subsurface crests of most of the domes and anticlines are not directly under the crests as determined on the exposed rocks, and the dips of the deeper rocks are steeper and the structural closures greater in the buried rocks than in the exposed rocks. The exposed rocks are cut by several faults that trend northwest, but the data are insufficient to determine whether the deeply buried rocks, also, are displaced along the faults. This investigation has shown that there are a few localities not yet completely tested in this part of Osage County that may produce oil and gas and that a few producing oil fields have areas within or adjacent to them that have not been thoroughly prospected. It is pointed out that yields of oil and gas from limy reservoir rocks may be increased by acid treatment and that additional oil may be produced from some of the reservoir sands by repressuring them with gas or flooding them with water.

Oklahoma↗
USGS1999

Gas and Isotope Geochemistry of 81 Steam Samples from Wells in The Geysers Geothermal Field, Sonoma and Lake Counties, California

The Geysers geothermal field in northern California, with about 2000-MW electrical capacity, is the largest geothermal field in the world. Despite its importance as a resource and as an example of a vapor-dominated reservoir, very few complete geochemical analyses of the steam have been published (Allen and Day, 1927; Truesdell and others, 1987). This report presents data from 90 steam, gas, and condensate samples from wells in The Geysers geothermal field in northern California. Samples were collected between 1978 and 1991. Well attributes include sampling date, well name, location, total depth, and the wellhead temperature and pressure at which the sample was collected. Geochemical characteristics include the steam/gas ratio, composition of noncondensable gas (relative proportions of CO2, H2S, He, H2, O2, Ar, N2, CH4, and NH3), and isotopic values for deltaD and delta18O of H2O, delta13C of CO2, and delta34S of H2S. The compilation includes 81 analyses from 74 different production wells, 9 isotopic analyses of steam condensate pumped into injection wells, and 5 complete geochemical analyses on gases from surface fumaroles and bubbling pools. Most samples were collected as saturated steam and plot along the liquid-water/steam boiling curve. Steam-togas ratios are highest in the southeastern part of the geothermal field and lowest in the northwest, consistent with other studies. Wells in the Northwest Geysers are also enriched in N2/Ar, CO2 and CH4, deltaD, and delta18O. Well discharges from the Southeast Geysers are high in steam/gas and have isotopic compositions and N2/Ar ratios consistent with recharge by local meteoric waters. Samples from the Central Geysers show characteristics found in both the Southeast and Northwest Geysers. Gas and steam characteristics of well discharges from the Northwest Geysers are consistent with input of components from a high-temperature reservoir containing carbonrich gases derived from the host Franciscan rocks. Throughout the geothermal field, the carbon-isotopic composition of CO2 is consistent with derivation of carbon from Franciscan metasedimentary rocks. NH3 concentrations are high in most Geysers well fluids, and are 2-3 orders of magnitude greater than would be expected in a the gas phase exhibiting homogeneous equilibrium at normal reservoir temperatures and pressures. Evidently, NH3 is flushed from the Franciscan host rocks at a rate that exceeds the reaction rate for NH3 breakdown. Many wells show clear influence by fluids from reinjection wells where steam condensate has been pumped back into the geothermal reservoir. Six wells were resampled over the time period of this study. One of these six wells was strongly affected by a nearby injection well. Three of the six resampled wells showed some signs of decreasing liquid/ steam within the geothermal reservoir, consistent with 'drying out' of the reservoir due to steam withdrawal. However, two wells exhibited little change. Analyses of gases from five surface manifestations (fumaroles and bubbling pools) are roughly similar to the deeper geothermal samples in both chemical and isotopic composition, but are lower in soluble gases that dissolve in groundwater during transit toward the surface.

Open-File Report↗
USGS2017

Groundwater quality in the Western San Joaquin Valley study unit, 2010: California GAMA Priority Basin Project

Water quality in groundwater resources used for public drinking-water supply in the Western San Joaquin Valley (WSJV) was investigated by the USGS in cooperation with the California State Water Resources Control Board (SWRCB) as part of its Groundwater Ambient Monitoring and Assessment (GAMA) Program Priority Basin Project. The WSJV includes two study areas: the Delta–Mendota and Westside subbasins of the San Joaquin Valley groundwater basin. Study objectives for the WSJV study unit included two assessment types: (1) a status assessment yielding quantitative estimates of the current (2010) status of groundwater quality in the groundwater resources used for public drinking water, and (2) an evaluation of natural and anthropogenic factors that could be affecting the groundwater quality. The assessments characterized the quality of untreated groundwater, not the quality of treated drinking water delivered to consumers by water distributors. The status assessment was based on data collected from 43 wells sampled by the U.S. Geological Survey for the GAMA Priority Basin Project (USGS-GAMA) in 2010 and data compiled in the SWRCB Division of Drinking Water (SWRCB-DDW) database for 74 additional public-supply wells sampled for regulatory compliance purposes between 2007 and 2010. To provide context, concentrations of constituents measured in groundwater were compared to U.S. Environmental Protection Agency (EPA) and SWRCB-DDW regulatory and non-regulatory benchmarks for drinking-water quality. The status assessment used a spatially weighted, grid-based method to estimate the proportion of the groundwater resources used for public drinking water that has concentrations for particular constituents or class of constituents approaching or above benchmark concentrations. This method provides statistically unbiased results at the study-area scale within the WSJV study unit, and permits comparison of the two study areas to other areas assessed by the GAMA Priority Basin Project statewide. Groundwater resources used for public drinking water in the WSJV study unit are among the most saline and most affected by high concentrations of inorganic constituents of all groundwater resources used for public drinking water that have been assessed by the GAMA Priority Basin Project statewide. Among the 82 GAMA Priority Basin Project study areas statewide, the Delta–Mendota study area ranked above the 90th percentile for aquifer-scale proportions of groundwater resources having concentrations of total dissolved solids (TDS), sulfate, chloride, manganese, boron, chromium(VI), selenium, and strontium above benchmarks, and the Westside study area ranked above the 90th percentile for TDS, sulfate, manganese, and boron. In the WSJV study unit as a whole, one or more inorganic constituents with regulatory or non-regulatory, health-based benchmarks were present at concentrations above benchmarks in about 53 percent of the groundwater resources used for public drinking water, and one or more organic constituents with regulatory health-based benchmarks were detected at concentrations above benchmarks in about 3 percent of the resource. Individual constituents present at concentrations greater than health-based benchmarks in greater than 2 percent of groundwater resources used for public drinking water included: boron (51 percent, SWRCB-DDW notification level), chromium(VI) (25 percent, SWRCB-DDW maximum contaminant level (MCL)), arsenic (10 percent, EPA MCL), strontium (5.1 percent, EPA Lifetime health advisory level (HAL)), nitrate (3.9 percent, EPA MCL), molybdenum (3.8 percent, EPA HAL), selenium (2.6 percent, EPA MCL), and benzene (2.6 percent, SWRCB-DDW MCL). In addition, 50 percent of the resource had TDS concentrations greater than non-regulatory, aesthetic-based SWRCB-DDW upper secondary maximum contaminant level (SMCL), and 44 percent had manganese concentrations greater than the SWRCB-DDW SMCL. Natural and anthropogenic factors that could affect the groundwater quality were evaluated by using results from statistical testing of associations between constituent concentrations and values of potential explanatory factors, inferences from geochemical and age-dating tracer results, and by considering the water-quality results in the context of the hydrogeologic setting of the WSJV study unit. Natural factors, particularly the lithologies of the source areas for groundwater recharge and of the aquifers, were the dominant factors affecting groundwater quality in most of the WSJV study unit. However, where groundwater resources used for public supply included groundwater recharged in the modern era, mobilization of constituents by recharge of water used for irrigation also affected groundwater quality. Public-supply wells in the Westside study area had a median depth of 305 m and primarily tapped groundwater recharged hundreds to thousands of years ago, whereas public-supply wells in the Delta–Mendota study area had a median depth of 85 m and primarily tapped either groundwater recharged within the last 60 years or groundwater consisting of mixtures of this modern recharge and older recharge. Public-supply wells in the WSJV study unit are screened in the Tulare Formation and zones above and below the Corcoran Clay Member are used. The Tulare Formation primarily consists of alluvial sediments derived from the Coast Ranges to the west, except along the valley trough at the eastern margin of the WSJV study unit where the Tulare Formation consists of fluvial sands derived from the Sierra Nevada to the east. Groundwater from wells screened in the Sierra Nevada sands had manganese-reducing or manganese- and iron-reducing oxidation-reduction (redox) conditions. These redox conditions commonly were associated with elevated arsenic or molybdenum concentrations, and the dominance of arsenic(III) in the dissolved arsenic supports reductive dissolution of iron and manganese oxyhydroxides as the mechanism. In addition, groundwater from many wells screened in Sierra Nevada sands contained low concentrations of nitrite or ammonium, indicating reduction of nitrate by denitrification or dissimilatory processes, respectively. Geology of the Coast Ranges westward of the study unit strongly affects groundwater quality in the WSJV. Elevated concentrations of TDS, sulfate, boron, selenium and strontium in groundwater were primarily associated with aquifer sediments and recharge derived from areas of the Coast Ranges dominated by Cretaceous-to-Miocene age, organic-rich, reduced marine shales, known as the source of selenium in WSJV soils, surface water, and groundwater. Low sulfur-isotopic values (δ34S) of dissolved sulfate indicate that the sulfate was largely derived from oxidation of biogenic pyrite from the shales, and correlations with trace element concentrations, geologic setting, and groundwater geochemical modeling indicated that distributions of sulfate, strontium, and selenium in groundwater were controlled by dissolution of secondary sulfate minerals in soils and sediments. Elevated concentrations of chromium(VI) were primarily associated with aquifer sediments and recharge derived from areas of the Coast Ranges dominated by the Franciscan Complex and ultramafic rocks. The Franciscan Complex also has boron-rich, sodium-chloride dominated hydrothermal fluids that contribute to elevated concentrations of boron and TDS. Groundwater from wells screened in Coast Ranges alluvium was primarily oxic and relatively alkaline (median pH value of 7.55) in the Delta–Mendota study area, and primarily nitrate-reducing or suboxic and alkaline (median pH value of 8.4) in the Westside study area. Many groundwater samples from those wells have elevated concentrations of arsenic(V), molybdenum, selenium, or chromium(VI), consistent with desorption of metal oxyanions from mineral surfaces under those geochemical conditions. High concentrations of benzene were associated with deep wells located in the vicinity of petroleum deposits at the southern end of the Westside study area. Groundwater from these wells had premodern age and anoxic geochemical conditions, and the ratios among concentrations of hydrocarbon constituents were different from ratios found in fuels and combustion products, which is consistent with a geogenic source for the benzene rather than contamination from anthropogenic sources. Water stable-isotope compositions, groundwater recharge temperatures, and groundwater ages were used to infer four types of groundwater: (1) groundwater derived from natural recharge of water from major rivers draining the Sierra Nevada; (2) groundwater primarily derived from natural recharge of water from Coast Ranges runoff; (3) groundwater derived from recharge of pumped groundwater applied to the land surface for irrigation; and (4) groundwater derived from recharge during a period of much cooler paleoclimate. Water previously used for irrigation was found both above and below the Corcoran Clay, supporting earlier inferences that this clay member is no longer a robust confining unit. Recharge of water used for irrigation has direct and indirect effects on groundwater quality. Elevated nitrate concentrations and detections of herbicides and fumigants in the Delta–Mendota study area generally were associated with greater agricultural land use near the well and with water recharged during the last 60 years. However, the extent of the groundwater resource affected by agricultural sources of nitrate was limited by groundwater redox conditions sufficient to reduce nitrate. The detection frequency of perchlorate in Delta–Mendota groundwater was greater than expected for natural conditions. Perchlorate, nitrate, selenium, and strontium concentrations were correlated with one another and were greater in groundwater inferred to be recharge of previously pumped groundwater used for irrigation. The source of the perchlorate, selenium, and strontium appears to be salts deposited in the soils and sediments of the arid WSJV that are dissolved and flushed into groundwater by the increased amount of recharge caused by irrigation. In the Delta–Mendota study area, the groundwater with elevated concentrations of selenium was found deeper in the aquifer system than it was reported by a previous study 25 years earlier, suggesting that this transient front of groundwater with elevated concentrations of constituents derived from dissolution of soil salts by irrigation recharge is moving down through the aquifer system and is now reaching the depth zone used for public drinking water supply.

California↗
USGS1995

Geology and hydrology of the Edwards Aquifer in the San Antonio area, Texas

The Edwards aquifer, which is the sole source of water for the city of San Antonio, is one of the most permeable and productive carbonate aquifers in the United States. The aquifer is composed of extensively faulted, fractured, and cavernous limestone and dolomite of Early Cretaceous age lying within the Balcones fault zone a series of normal en echelon strike faults that separate the Edwards Plateau from the Gulf Coastal Plain in south Texas. Along segments of some faults, the entire thickness of the aquifer is displaced vertically, and these faults then act as barriers to downdip ground-water flow. The large porosity and exceptional permeability of the unconfined part of the Edwards aquifer result from the dissolution of limestone by circulating ground water and development of a cavernous network along fractures. The large porosity and permeability of the freshwater part of the confined Edwards aquifer result primarily from dedolomitization. The small permeability of the saline-water part of the confined aquifer is caused by the limited interconnection between the pores in the rock matrix and by the lack of substantial dissolution along fractures. The large transmissivity of the Edwards aquifer is indicated by the hundreds of highyielding wells, small hydraulic gradients, and large spring discharges. The determined transmissivity throughout most of the confined freshwater aquifer ranges from 430,000 to 2,200,000 feet squared per day; the determined transmissivity of the unconfined aquifer generally is less than 430,000 feet squared per day. Faulting causes the aquifer to be highly anisotropic, and simulation indicates anisotropy ratios ranging from 0.0:1 to 1:1. The ground-water-flow system of the Edwards aquifer includes several components. These include a catchment area on the Edwards Plateau where the unconfined aquifer receives direct recharge, an area of confining beds crossed by streams draining the Edwards Plateau, a major recharge area within the Balcones fault zone where streams lose flow directly into the unconfined Edwards aquifer, and the confined Edwards aquifer that consists of the freshwater and salinewater zones. Water entering the Edwards aquifer in the Balcones fault zone moves downdip in a generally southeasterly direction into the confined parts of the aquifer. In the confined aquifer, flow is toward the east and northeast under low hydraulic gradients through fractured, highly transmissive limestone and ultimately discharges at large springs and wells. All of the base flow and some of the storm runoff of streams crossing the recharge area infiltrates to the unconfined aquifer. On the basis of streamflow losses, the average annual recharge for 1934-88 was 635,500 acre-feet. Freshwater discharges from the Edwards aquifer primarily from wells, springs, and seeps. Beginning in 1968, annual discharge from the aquifer has consistently exceeded average annual recharge largely because of a doubling of well pumpage. However, total springflow also increased because of greater-than-average recharge during most years since the late 1960's. The total volume of circulating freshwater in the Edwards aquifer is about 45 million acrefeet. Long-term hydrographs at San Antonio indicate no net decline in ground-water levels during 1911-87; thus, there was no net loss of water from storage in the freshwater zone of the Edwards aquifer during that long-term period, assuming the San Antonio hydrograph represents the entire aquifer. However, short-term changes in water levels result largely from the variability of precipitation as indicated by severe declines during the drought of the late 1940's to middle 1950's and by rises to record highs during the abnormally wet years in the 1970's and 1980's. The principal components of the groundwater budget (recharge, springflow, and pumpage) have varied greatly over 55 years (1934-88) of pertinent hydrologic records. Annual recharge varied from about 44,000 to 2,000,000 acre-feet. Annual springflow varied from about 70,000 acrefeet to about 580,000 acre-feet. Pumpage increased from about 100,000 acre-feet annually in the early 1930's to more than 500,000 acre-feet annually during some years in the 1980's. However, the average annual recharge of 635,500 acrefeet is about equal to the sum of the average annual springflow (359,500 acre-feet) and average annual pumpage (273,000 acre-feet), indicating no longterm decrease in ground-water storage because of springflow and pumpage.

Texas↗
USGS1972

Ground-water data in the Corvallis-Albany area, central Willamette Valley, Oregon

THE CORVALLIS-ALBANY AREA IS PART OF THE ALLUVIAL PLAIN THAT LIES BETWEEN THE CASCADE AND COAST RANGES IN THE CENTRAL WILLAMETTE VALLEY IN NORTHWESTERN OREGON. THE ALLUVIAL DEPOSITS (SAND AND GRAVEL) OF THE VALLEY PLAIN CONTAIN THE MOST PRODUCTIVE AQUIFERS IN THE AREA AND ARE CONSIDERED TO BE THE ONLY UNITS FEASIBLE FOR LARGE-SCALE DEVELOPMENT OF GROUNDWATER SUPPLIES. DURING 1971 THE SEASONAL DECLINE OF WATER LEVELS FROM WINTER TO LATE SUMMER AVERAGED ABOUT 10 FEET FOR THE ALLUVIAL DEPOSITS. THE SEASONAL CHANGE OF STORAGE WAS ESTIMATED TO BE ABOUT 130,000 ACRE-FEET. OF THIS VOLUME, ABOUT 14,000 ACRE-FEET WAS PUMPED FROM WELLS; THE REST WAS DISCHARGED THROUGH SEEPS AND SPRINGS BY EVAPOTRANSPIRATION. THE DIFFERENCE BETWEEN PUMPAGE AND NATURAL DISCHARGE INDICATES THAT A GREAT QUANTITY OF ADDITIONAL WATER IS AVAILABLE FOR DEVELOPMENT. THE STORAGE CAPACITY OF THE ALLUVIAL AQUIFERS IS ESTIMATED TO BE ABOUT 750,000 ACRE-FEET BETWEEN DEPTHS OF 10 AND 100 FEET. WATER FROM THE ALLUVIAL DEPOSITS IS CHEMICALLY SUITABLE FOR ALL USES, AS IS MOST OF THE WATER FROM PERCHED-WATER BODIES IN THE OLDER SEDIMENTARY AND VOLCANIC ROCKS.

Oregon↗
USGS1984

Brief comparison of some technological and environmental aspects of large-scale surface and underground mining of oil shale, Piceance Creek Basin, Colorado

Comparison of several aspects of surface and underground methods of mining for large-scale oil shale extraction in the Piceance Creek Basin suggests that surface mining techniques may have several advantages over underground methods. For a production level of one million barrels of shale oil per day, potential advantages include those related to economics, environmental effects, and the overall national interest. One million barrels of shale oil per day could be produced from 2-3 large surface mines compared to perhaps 10-20 large underground mines. Fewer surface mines would result in: (1) fewer roads and utility corridors, (2) less acres disturbed per barrel of oil pro duced, (3) reduced detrimental effects on ground water and surface water, (4) less wildlife distur bance, (5) a safer overall operation, (6) a greater opportunity to achieve stable long-term land and water reclamation, (7) potential economic advantages related to scale and materials handling, and (8) a three- to five-fold increase in resource recovery. Advantages to underground (including modified in situ [MIS]) mines include: (1) more flexibility of mine siting, (2) mining and handling a minimum of waste rock, and (3) simplified ore grade control for processing.

Colorado↗