Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Natural Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68Linked to original sources

EAARL Coastal Topography - Northern Gulf of Mexico, 2007: First surface

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) elevation data were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. The project provides highly detailed and accurate datasets of select barrier islands and peninsular regions of Louisiana, Mississippi, Alabama, and Florida, acquired June 27-30, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Alabama, Mississippi↗

EAARL Coastal Topography-Assateague Island National Seashore, 2008: First Surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Assateague Island National Seashore in Maryland and Virginia, acquired March 24-25, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for pre-survey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗

EAARL Coastal Topography-Assateague Island National Seashore, 2008: Bare Earth

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Assateague Island National Seashore in Maryland and Virginia, acquired March 24-25, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL) was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for pre-survey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗

Kansas coal distribution, resources, and potential for coalbed methane

100 ft (>30 m)] determined from 32 different coal beds. Strippable coal resources at a depth < 100 ft (<30 m) total 2.8 billion tons (2.6 billion MT), and this total is determined from 17 coals. Coal beds present in the Cherokee Group (Middle Pennsylvanian) represent most of these coal resource totals. Deep coal beds with the largest resource totals include the Bevier, Mineral, \"Aw\" (unnamed coal bed), Riverton, and Weir-Pittsburg coals, all within the Cherokee Group. Based on chemical analyses, coals in the southeastern part of the state are generally high volatile A bituminous, whereas coals in the east-central and northeastern part of the state are high-volatile B bituminous coals. The primary concern of coal beds in Kansas for deep mining or development of coalbed methane is the thin nature [<2 ft (0.6 m)] of most coal beds. Present production of coalbed methane is centered mainly in the southern Wilson/northern Montgomery County area of southeastern Kansas where methane is produced from the Mulky, Weir-Pittsburg, and Riverton coals."}" data-sheets-userformat="{"2":8403202,"4":[null,2,16777215],"11":4,"14":[null,2,0],"15":"Inconsolata, monospace, arial, sans, sans-serif","16":11,"26":400}" data-sheets-formula="=VLOOKUP(R[0]C[-5],Fixed!R2C[-6]:C[-4],3,false)">Kansas has large amounts of bituminous coal both at the surface and in the subsurface of eastern Kansas. Preliminary studies indicate at least 53 billion tons (48 billion MT) of deep coal [>100 ft (>30 m)] determined from 32 different coal beds. Strippable coal resources at a depth < 100 ft (<30 m) total 2.8 billion tons (2.6 billion MT), and this total is determined from 17 coals. Coal beds present in the Cherokee Group (Middle Pennsylvanian) represent most of these coal resource totals. Deep coal beds with the largest resource totals include the Bevier, Mineral, "Aw" (unnamed coal bed), Riverton, and Weir-Pittsburg coals, all within the Cherokee Group. Based on chemical analyses, coals in the southeastern part of the state are generally high volatile A bituminous, whereas coals in the east-central and northeastern part of the state are high-volatile B bituminous coals. The primary concern of coal beds in Kansas for deep mining or development of coalbed methane is the thin nature [<2 ft (0.6 m)] of most coal beds. Present production of coalbed methane is centered mainly in the southern Wilson/northern Montgomery County area of southeastern Kansas where methane is produced from the Mulky, Weir-Pittsburg, and Riverton coals.

Kansas↗

Environmental implications of growth rate changes in Montastrea Annularis : Biscayne National Park, Florida

Long-term annual growth rates were determined for 25 Montastrea annularis colonies at eight reef sites in Biscayne National Park, Florida. X-radiographs of slabbed coral cores revealed chronologies that averaged 113.5 years in length with a range of 40 to 242 years. A total of 2,837 annual growth increments were identified and measured. Dating of density bands was verified by visually crossdating fluorescent bands within the coral skeleton. Average accretion rates of individual colonies varied from 5.0 mm&middot;yr &minus;1 in the northernmost sector of the Park to 11.3 mm&middot;yr &minus;1 in the southernmost sector. Long-term growth rates of most corals in this study were greatest prior to about 1950 except for a major, 3&ndash;5 year, decline in the growth record of older corals centered around 1878. Waxing and waning coral growth rates are discussed in relation to natural and anthropogenic perturbations that impact this high latitude reef ecosystem. Attention is drawn to nutrients from sewage outfalls as a possible contributing factor to observed growth rate decline since 1950.

Florida↗

Relations among geology, physiography, land use, and stream habitat conditions in the Buffalo and Current River systems, Missouri and Arkansas

This study investigated links between drainage-basin characteristics and stream habitat conditions in the Buffalo National River, Arkansas and the Ozark National Scenic Riverways, Missouri. It was designed as an associative study - the two parks were divided into their principle tributary drainage basins and then basin-scale and stream-habitat data sets were gathered and compared between them. Analyses explored the relative influence of different drainage-basin characteristics on stream habitat conditions. They also investigated whether a relation between land use and stream characteristics could be detected after accounting for geologic and physiographic differences among drainage basins. Data were collected for three spatial scales: tributary drainage basins, tributary stream reaches, and main-stem river segments of the Current and Buffalo Rivers. Tributary drainage-basin characteristics were inventoried using a Geographic Information System (GIS) and included aspects of drainage-basin physiography, geology, and land use. Reach-scale habitat surveys measured channel longitudinal and cross-sectional geometry, substrate particle size and embeddedness, and indicators of channel stability. Segment-scale aerial-photo based inventories measured gravel-bar area, an indicator of coarse sediment load, along main-stem rivers. Relations within and among data sets from each spatial scale were investigated using correlation analysis and multiple linear regression. Study basins encompassed physiographically distinct regions of the Ozarks. The Buffalo River system drains parts of the sandstone-dominated Boston Mountains and of the carbonate-dominated Springfield and Salem Plateaus. The Current River system is within the Salem Plateau. Analyses of drainage-basin variables highlighted the importance of these physiographic differences and demonstrated links among geology, physiography, and land-use patterns. Buffalo River tributaries have greater relief, steeper slopes, and more streamside bluffs than the Current River tributaries. Land use patterns in both river systems correlate with physiography - cleared land area is negatively associated with drainage-basin average slope. Both river systems are dominantly forested (0-35 per-cent cleared land), however, the potential for landscape disturbance may be greater in the Buffalo River system where a larger proportion of cleared land occurs on steep slopes (>15 degrees). When all drainage basins are grouped together, reach-scale channel characteristics show the strongest relations with drainage-basin physiography. Bankfull channel geometry and residual pool dimensions are positively correlated with drainage area and topographic relief variables. After accounting for differences in drainage area, channel dimensions in Buffalo River tributaries tend to be larger than in Current River tributaries. This trend is consistent with the flashy runoff and large storm flows that can be generated in rugged, sandstone-dominate terrain. Substrate particle size is also most strongly associated with physiography; particle size is positively correlated with topographic relief variables. When tributaries are subset by river system, relations with geology and land use variables become apparent. Buffalo River tributaries with larger proportions of carbonate bedrock and cleared land area have shallower channels, better-sorted, gravel-rich substrate, and more eroding banks than those with little cleared land and abundant sandstone bedrock. Gravel-bar area on the Buffalo River main stem was also larger within 1-km of carbonate-rich tributary junctions. Because geology and cleared land are themselves correlated, relations with anthropogenic and natural factors could often not be separated. Channel characteristics in the Current River system show stronger associations with physiography than with land use. Channels are shallower and have finer substrates in the less rugged, karst-rich, western basins than in the

Arkansas, Missouri↗

EAARL coastal topography — Sandy Hook 2007

These remotely sensed, geographically referenced elevation measurements of Lidar-derived topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of Gateway National Recreation Area's Sandy Hook Unit in New Jersey, acquired on May 16, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL) was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for pre-survey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

New York↗

Groundwater quality in the Columbia Plateau, Snake River Plain, and Oahu basaltic-rock and basin-fill aquifers in the Northwestern United States and Hawaii, 1992-2010

This assessment of groundwater-quality conditions of the Columbia Plateau, Snake River Plain, and Oahu for the period 1992&ndash;2010 is part of the U.S. Geological Survey&rsquo;s National Water Quality Assessment (NAWQA) program. It shows where, when, why, and how specific water-quality conditions occur in groundwater of the three study areas and yields science-based implications for assessing and managing the quality of these water resources. The primary aquifers in the Columbia Plateau, Snake River Plain, and Oahu are mostly composed of fractured basalt, which makes their hydrology and geochemistry similar. In spite of the hydrogeologic similarities, there are climatic differences that affect the agricultural practices overlying the aquifers, which in turn affect the groundwater quality. Understanding groundwater-quality conditions and the natural and human factors that control groundwater quality is important because of the implications to human health, the sustainability of rural agricultural economies, and the substantial costs associated with land and water management, conservation, and regulation. The principal regional aquifers of the Columbia Plateau, Snake River Plain, and Oahu are highly vulnerable to contamination by chemicals applied at the land surface; essentially, they are as vulnerable as many shallow surficial aquifers elsewhere. The permeable and largely unconfined character of principal aquifers in the Columbia Plateau, Snake River Plain, and Oahu allow water and chemicals to infiltrate to the water table despite depths to water commonly in the hundreds of feet. The aquifers are essentially unconfined over large areas, having few extensive clay layers to impede infiltration through permeable volcanic rock and alluvial sediments. Agriculture is intensive in all three study areas, and heavy irrigation has imposed large artificial flows of irrigation recharge that rival or exceed natural recharge rates. Fertilizers and pesticides applied at land surface are leached from soil and transported to deep water tables with the infiltrating irrigation recharge, resulting in a layer of degraded water quality overlying better quality regional groundwater beneath. This &ldquo;irrigation-recharge layer&rdquo; is best known on Oahu, where it has been studied since the 1960s; however, the extent of nitrate and pesticide contamination in the Columbia Plateau and Snake River Plain indicate that the same situation exists in those areas. Contamination from agricultural and urban activities is present not only at shallow depths in surficial materials of the three areas, but extends regionally in the deep, principal bedrock aquifers that are tapped for drinking water by domestic and public-supply wells. Naturally occurring constituents and nitrate concentrations above human-health benchmarks&mdash;Maximum Contaminant Levels (MCLs), and Health-Based Screening Levels (HBSLs)&mdash;were more common in the Columbia Plateau and the Snake River Plain than in Oahu. Concentrations of anthropogenic constituents (constituents related to human activities) above human-health benchmarks were more common in Oahu. Naturally occurring contaminants, such as arsenic and radon, may be present in groundwater at concentrations of potential concern for human health in relatively undeveloped settings that otherwise may not be perceived as susceptible to contamination. Even though the median depth to groundwater in Oahu is more than 300 feet, the common occurrence of anthropogenic compounds in groundwater indicates that Oahu has a high susceptibility to contamination. Nitrate concentrations in groundwater were above the national background concentrations of 1 milligram per liter (mg/L) in all three study areas. In the Columbia Plateau, nitrate exceeded the human-health benchmark of 10 mg/L in 20 percent of the wells sampled. In the Snake River Plain, nitrate exceeded the human-health benchmark of 10 mg/L in 3 percent of the wells sampled. Nitrate can persist in groundwater for years and even decades in the oxygen-rich groundwater of the Columbia Plateau and the Snake River Plain, so prudent groundwater protection measures are critical to protect drinking water resources by reducing nitrate leaching from the land surface. Nitrate logistic regression models indicated that areas with a high percentage of land in crops (such as potatoes or sugarcane) and soils with low amounts of organic matter are most likely to have elevated nitrate concentrations in the groundwater. Areas where agricultural activities were absent had much lower probabilities of detecting elevated nitrate concentrations. The Columbia Plateau had a much higher probability of having elevated nitrate concentrations, with most of the land area having greater than a 50 percent probability of elevated nitrate concentrations. Oahu and the Snake River Plain had a much lower probability of having elevated nitrate concentrations because of their lower percentage of agricultural land. Pesticides were detected at many sites in groundwater of the Columbia Plateau, Snake River Plain, and Oahu but generally at low concentrations below human-health benchmarks. Atrazine and its degradate (a compound produced from the breakdown of a parent pesticide), deethylatrazine, were the most commonly detected pesticides in groundwater sampled in the Columbia Plateau and Snake River Plain. Bromacil was the most commonly detected pesticide on Oahu. The other pesticides most commonly detected in the study areas include simazine, hexazinone, metribuzin, diuron, prometon, metolachlor, p,p&rsquo; -DDE, dieldrin, 2-4-D, and alachlor. DDE (a degradate of DDT) and dieldrin are still being detected in groundwater despite having been banned for more than 30 years. Codetection of multiple pesticides in water from a single well was common. The widespread occurrence of pesticides in groundwater in the study areas indicates that the groundwater is highly susceptible to pesticide contamination. Some pesticides were detected in groundwater samples from all three study areas, but other pesticides were detected only in samples from Oahu, or only in samples from the Columbia Plateau and Snake River Plain. This is because some pesticides (such as atrazine) are broad-spectrum pesticides that are used on many crops in many different areas of the United States. Other pesticides (such as simazine, metribuzin, and metolachlor) are used on row crops (such as potatoes, barley, and alfalfa) grown in the Columbia Plateau and Snake River Plain, but not on pineapple or sugarcane grown in Oahu. Atrazine logistic-regression models indicate that areas with a high percentage of land in crops (such as potatoes or sugarcane), a low percentage of fallow land, and highly permeable soils with low amounts of organic matter are most likely to have atrazine detected in the groundwater. Areas where agricultural activities were absent had much lower probabilities of atrazine being detected. The Snake River Plain had a much higher probability of atrazine detections, with more than 50 percent of the land area having greater than a 50 percent probability of atrazine contamination. Oahu had a much lower probability of atrazine contamination, with only 24 percent of the land area having greater than a 50 percent probability of atrazine contamination. Oahu and the Columbia Plateau had some of the highest percentages of soil fumigant detections in groundwater in the United States. Soil fumigants are volatile organic compounds (VOCs) used as pesticides, which are applied to soils to reduce populations of plant parasitic nematodes (harmful rootworms), weeds, fungal pathogens, and other soil-borne microorganisms. They are used in Oahu and the Columbia Plateau on crops such as pineapple and potatoes. All three areas (Columbia Plateau, Snake River Plain, and Oahu) had fumigant concentrations exceeding human-health benchmarks for drinking water.

Hawai'i, Idaho, Nevada, Oregon, Utah, Washington, ↗

Climate change adaptation for coastal national wildlife refuges

National Wildlife Refuges (NWRs) along the East Coast of the United States protect habitat for a host of wildlife species, while also offering storm surge protection, improving water quality, supporting nurseries for commercially important fish and shellfish, and providing recreation opportunities for coastal communities. Yet in the last century, coastal ecosystems in the eastern U.S. have been severely altered by human development activities as well as sea-level rise and more frequent extreme events related to climate change. These influences threaten the ability of NWRs to protect our nation’s natural resources and to sustain their many beneficial services. Through this project, researchers are collaborating with managers of the North Carolina Coastal Refuges Complex, Cape Romain NWR, South Carolina, and other local interested partners to assist with their long-term planning under uncertain conditions regarding sea-level rise and other global change processes. Researchers are using a variety of state-of-the-art approaches, including formal decision science for systematically analyzing management alternatives and scenario planning methods for engaging with stakeholders to explore possible futures. These approaches are aimed at helping NWR staff develop management objectives, identify and weigh potential management actions for adaptation, and generate decision-support tools and models. Outcomes and products from these efforts will aid managers as they plan for and adapt to the complex challenges facing the NWR system as changing climate and other conditions make their work increasingly more difficult.

Final Project Memorandum↗

Modeling drivers of phosphorus loads in Chesapeake Bay tributaries and inferences about long-term change

Causal attribution of changes in water quality often consists of correlation, qualitative reasoning, listing references to the work of others, or speculation. To better support statements of attribution for water-quality trends, structural equation modeling was used to model the causal factors of total phosphorus loads in the Chesapeake Bay watershed. By transforming, scaling, and standardizing variables, grouping similar sites, grouping some causal factors into latent variable models, and using methods that correct for assumption violations, we developed a structural equation model to show how causal factors interact to produce total phosphorus loads. Climate (in the form of annual total precipitation and the Palmer Hydrologic Drought Index) and anthropogenic inputs are the major drivers of total phosphorus load in the Chesapeake Bay watershed. Increasing runoff due to natural climate variability is offsetting purposeful management actions that are otherwise decreasing phosphorus loading; consequently, management actions may need to be reexamined to achieve target reductions in the face of climate variability.

Chesapeake Bay↗

Pesticides in U.S. streams and groundwater

A 10­-year study by the U.S. Geological Survey’s (USGS’s) National Water-­Quality Assessment (NAWQA) Program provides a national-­scale view of pesticide occurrence in streams and groundwater. The 1992-2001 study builds upon a preliminary analysis from NAWQA’s first phase of studies during 1992-1996 (1, 2). Pesticide data available from various studies prior to 1992 did not allow national assessment because of limited and variable geographic coverage (usually focusing on individual states or regions), sparse and inconsistent inclusion of pesticides in use, and variable sampling designs (3-5). The expanded geographic coverage and improved data following 10 years of study (Figure 1) confirm and reinforce previously reported findings and enable more detailed analyses of each topic. This article summarizes selected findings from a comprehensive report (6), with a focus on the nature of pesticide occurrence and potential significance to human health and stream ecosystems. Information on study design and methods as well as additional analysis of geographic patterns and trends in relation to use and management practices are available in the full report (6).

Environmental Science & Technology↗

Mercury speciation and mobilization in a wastewater-contaminated groundwater plume

We measured the concentration and speciation of mercury (Hg) in groundwater down-gradient from the site of wastewater infiltration beds operated by the Massachusetts Military Reservation, western Cape Cod, Massachusetts. Total mercury concentrations in oxic, mildly acidic, uncontaminated groundwater are 0.5–1 pM, and aquifer sediments have 0.5–1 ppb mercury. The plume of impacted groundwater created by the wastewater disposal is still evident, although inputs ceased in 1995, as indicated by anoxia extending at least 3 km down-gradient from the disposal site. Solutes indicative of a progression of anaerobic metabolisms are observed vertically and horizontally within the plume, with elevated nitrate concentrations and nitrate reduction surrounding a region with elevated iron concentrations indicating iron reduction. Mercury concentrations up to 800 pM were observed in shallow groundwater directly under the former infiltration beds, but concentrations decreased with depth and with distance down-gradient. Mercury speciation showed significant connections to the redox and metabolic state of the groundwater, with relatively little methylated Hg within the iron reducing sector of the plume, and dominance of this form within the higher nitrate/ammonium zone. Furthermore, substantial reduction of Hg(II) to Hg0 within the core of the anoxic zone was observed when iron reduction was evident. These trends not only provide insight into the biogeochemical factors controlling the interplay of Hg species in natural waters, but also support hypotheses that anoxia and eutrophication in groundwater facilitate the mobilization of natural and anthropogenic Hg from watersheds/aquifers, which can be transported down-gradient to freshwaters and the coastal zone.

Massachusetts↗

Interdisciplinary discussion of volcanic processes beneath the Long Valley Caldera-Mono Craters Area

Volcanism in the Long Valley Caldera-Mono Craters (LVCMC) volcanic field in eastern California over the past 4 Ma is dominated by the 0.76 Ma caldera-forming eruption of 600 km 3 of rhyolite to form the Bishop Tuff. Over the last 150 k.y., volcanism has concentrated along the Mono-Inyo chain, which extends 45 km north from Mammoth Mountain to Mono Lake (Figure 1, below). Recent eruptions along this chain have occurred from multiple vents 650±50 yr B.P. and from a vent in the middle of Mono Lake ∼300 yr B.P. An earthquake swarm in May 1980, including four M6 earthquakes accompanied by uplift of the resurgent dome in the center of the caldera, called attention to the restless nature of Long Valley caldera. Subsequent activity has included recurring swarms of earthquakes (M≤5.8), episodic uplift of the resurgent dome, diffuse outgassing of magmatic CO 2 , and mid-crustal (10- to 25- km deep), long period (LP) volcanic earthquakes.

California↗

Satellite imagery maps Hurricane Katrina-induced flooding and oil slicks

In the early morning of 29 August 2005, Hurricane Katrina made landfall near Buras, Louisiana, as a Category 4 hurricane. With wind speeds of about 233 kilometers per hour, a storm surge of 8.5 meters, and heavy rains, Katrina pounded the U.S. Gulf Coast states of Alabama, Louisiana, and Mississippi with lifethreatening flooding and destruction. Katrina's high winds and storm surge breached the levees protecting New Orleans, a city located below sea level, and flooded approximately 80% of the city. Katrina also caused major damage to the region's oil and natural gas production and refining capabilities. On 2 September 2005, the Associated Press reported that Katrina had damaged 58 oil platforms, 30 of which were reported lost; one damaged platform had been blown nearly 100 km from its original location.

Eos, Earth and Space Science News↗

A future for the inland fish and fisheries hidden within the sustainable development goals

The United Nations Sustainable Development Goals (SDGs) are a unifying call for change - guiding global actions at multiple levels of governance for a better planet and better lives. Consequently, achieving the “future we want” may be hindered by overlooking valuable natural resources and services that are not explicitly included in the SDGs. Not recognizing the direct, intrinsic value of some natural resources may threaten the sustainability of the services they provide and their contributions to the SDGs. Here, we use inland aquatic ecosystems, and the fish and fisheries therein, as an example to explore opportunities for recognition and inclusion of other natural resources that are missing from the SDGs. Key resources absent from the SDGs are less likely to be incorporated in global, national, and regional objectives, dialogues, and policies. We outline multiple potential pathways for better inclusion and capitalization of contributions from these overlooked natural resources during the operationalization of the SDGs and other global instruments.

Frontiers in Environmental Science↗

Suburban wildlife: Lessons, challenges, and opportunities

The United States, as well as most developed and many developing nations worldwide, is becoming increasingly urban and suburban.Although urban, suburban, and commercial development account for less than one percent to just over 20% of land use among states, 50-90% of the residents of those states can be classified as urban or suburban dwellers. The population of the U.S. as a whole has risen from being > 95% rural in the 1790s to about 80% urban-suburban today. With these changes in land use and demographic patterns come changes in values and attitudes; many urbanites and suburbanites view wildlife and nature differently than rural residents. These are among the challenges faced by wildlife biologists and natural resource managers in a rapidly urbanizing world. In 2003, we convened a symposium to discuss issues related to suburban wildlife. The papers presented in this special issue of Urban Ecosystems address the lessons learned from the early and recently rapidly expanding literature, the challenges we face today, and the opportunities that can help deal with what is one of the biggest challenges to conservation in a modernizing world. ?? 2005 Springer Science + Business Media, Inc.

Urban Ecosystems↗

EAARL coastal topography — Fire Island National Seashore 2007

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) and bare earth (BE) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of Fire Island National Seashore in New York, acquired on April 29-30 and May 15-16, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL) was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for pre-survey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

New York↗

Concentrations of lead and other inorganic constituents in samples of raw intake and treated drinking water from the municipal water filtration plant and residential tapwater in Chicago, Illinois, and East Chicago, Indiana, July–December 2017

The U.S. Geological Survey (USGS) Environmental Health Mission Area (EHMA) is providing comprehensive science on sources, movement, and transformation of contaminants and pathogens in watershed and aquifer drinking-water supplies and in built water and wastewater infrastructure (referred to as the USGS Water and Wastewater Infrastructure project) in the Greater Chicago Area and elsewhere in the United States, to fill data gaps identified by stakeholders and collaborators in drinking water and public health. EHMA Water and Wastewater Infrastructure research specifically provides insight into natural factors in the environment as well as those water-infrastructure components and processes (such as source-water corrosivity, treatment, plumbing, and so forth) that might influence human exposure to chemical and microbial contaminants at the residential tap. This infrastructure-exposure research role is fulfilled uniquely by the USGS and not by the U.S. Environmental Protection Agency (EPA), other agencies, or municipalities that focus on regulatory and policy activities and related compliance. The USGS approach to assessing the possible links between human health and chemical contaminant and pathogen exposure in drinking water is conducted in collaboration with public health experts and includes comprehensive characterization of the presence/absence and concentrations of more than 500 organic and 27 inorganic chemical constituents at the point of use (tap). Laboratory results for lead and other inorganic contaminants in Chicago, Illinois, and East Chicago, Indiana, residential tapwater are being released to ensure the timely release of quality-assured data to participants in the study. Concentrations of lead and other inorganic constituents were assessed in drinking water at the point of use (kitchen tap or filter) in 45 residential locations and in two locations within each of the two Chicago water purification plants and the two East Chicago water filtration plants during July–December 2017. Three methods were used for analyzing lead. The most sensitive method had a reporting limit of 0.020 micrograms per liter (µg/L). When using the most sensitive analytical method, lead was detected in 39 of 45 residential tapwater samples, with concentrations ranging from less than 0.020 µg/L to 5.31 µg/L (median of the detected values = 0.481 µg/L). Concentrations of lead also were detected in Lake Michigan intake water at all water purification/filtration plant facilities at concentrations ranging from 0.083 to 0.330 µg/L, but were not detected above the reporting limit in any samples of treated, pre-distribution drinking water at any of the water purification/filtration plant facilities. Because the USGS Water and Wastewater Infrastructure project in the Greater Chicago Area is focused on the potential human exposure to a broad suite of organic and inorganic contaminants in drinking water and is not focused specifically on lead, the sampling protocol did not include “first-draw,” stagnant sampling and samples were collected with point-of-use treatment in place, if present. Thus, the lead results reported herein are not appropriate for assessment of compliance with the EPA 1991 Lead and Copper Rule. Information resources for lead mitigation and water filtration are provided.

Illinois, Indiana↗