Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Ground Water”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68Linked to original sources
USGS1998

Ground-water conditions in Utah, spring of 1998

This is the thirty-fifth in a series of annual reports that describe ground-water conditions in Utah. Reports in this series, published cooperatively by the U.S. Geological Survey and the Utah Department of Natural Resources, Division of Water Resources, provide data to enable interested parties to maintain awareness of changing ground-water conditions. This report, like the others in the series, contains information on well construction, ground-water withdrawal from wells, water-level changes, precipitation, streamflow, and chemical quality of water. Information on well construction included in this report refers only to wells constructed for new appropriations of ground water. Supplementary data are included in reports of this series only for those years or areas which are important to a discussion of changing ground-water conditions and for which applicable data are available. This report includes individual discussions of selected significant areas of ground-water development in the State for calendar year 1997. Most of the reported data were collected by the U.S. Geological Survey in cooperation with the Utah Department of Natural Resources, Divisions of Water Rights and Water Resources.

Utah↗
USGS1995

Ground Water Atlas of the United States: Segment 1, California, Nevada

California and Nevada compose Segment 1 of the Ground Water Atlas of the United States. Segment 1 is a region of pronounced physiographic and climatic contrasts. From the Cascade Mountains and the Sierra Nevada of northern California, where precipitation is abundant, to the Great Basin in Nevada and the deserts of southern California, which have the most arid environments in the United States, few regions exhibit such a diversity of topography or environment. Since the discovery of gold in the mid-1800's, California has experienced a population, industrial, and agricultural boom unrivaled by that of any other State. Water needs in California are very large, and the State leads the United States in agricultural and municipal water use. The demand for water exceeds the natural water supply in many agricultural and nearly all urban areas. As a result, water is impounded by reservoirs in areas of surplus and transported to areas of scarcity by an extensive network of aqueducts. Unlike California, which has a relative abundance of water, development in Nevada has been limited by a scarcity of recoverable freshwater. The Truckee, the Carson, the Walker, the Humboldt, and the Colorado Rivers are the only perennial streams of significance in the State. The individual basin-fill aquifers, which together compose the largest known ground-water reserves, receive little annual recharge and are easily depleted. Nevada is sparsely populated, except for the Las Vegas, the Reno-Sparks, and the Carson City areas, which rely heavily on imported water for public supplies. Although important to the economy of Nevada, agriculture has not been developed to the same degree as in California due, in large part, to a scarcity of water. Some additional ground-water development might be possible in Nevada through prudent management of the basin-fill aquifers and increased utilization of ground water in the little-developed carbonate-rock aquifers that underlie the eastern one-half of the State. The potential problem of withdrawals in excess of natural recharge, however, will require careful management of ground-water withdrawals.

California, Nevada↗
USGS1978

A preliminary appraisal of the impact of agriculture on ground-water availability in southwest Georgia

Irrigated acreage in the study area in southwest Georgia increased from 130,000 acres in 1976 to 261,000 in 1977. Acreage irrigated entirely by ground water increased 85 percent for the same period. The largest quantity of ground water used for irrigation was in the Dougherty Plain district, where 92 percent of supplemental irrigation water comes from wells. In the Tifton Upland district, ground water is the source for only 16 percent of the irrigation water used. The major ground-water reservoir supplying the irrigation water is the principal artesian aquifer. The Dougherty Plain, because of the gently rolling land surface and large fields, is suitable for the use of large self-propelled center-pivot irrigation systems requiring 1,200 to 1,500 gallons per minute. The installed pump capacity of the irrigation systems in the Dougherty Plain using ground water was 1.8 billion gallons per day in 1977. The total amount of water pumped for irrigation in the Dougherty Plain in 1977 was more than 42 billion gallons, 30 billion gallons more than in 1976. This quantity could be considerably higher in 1978 as preparations were being made to irrigate more than 214,000 acres during the 1978 growing season. There were no concentrations of selected organic compounds or trace metals used in agricultural chemicals above the recommended limits for public consumption in water analyzed from 19 wells. However, concentrations of total nitrite plus nitrate ranged from 0.3 to 7.8 milligrams per liter in wells in the Dougherty Plain, and this could indicate that the downward percolation of water through sandy soils has carried soluble nitrate, a byproduct of fertilizer, into the ground-water reservoir.

Georgia↗
USGS2008

Effects of Land-Use Changes and Ground-Water Withdrawals on Stream Base Flow, Pocono Creek Watershed, Monroe County, Pennsylvania

The Pocono Creek watershed drains 46.5 square miles in eastern Monroe County, Pa. Between 2000 and 2020, the population of Monroe County is expected to increase by 70 percent, which will result in substantial changes in land-use patterns. An evaluation of the effect of reduced recharge from land-use changes and additional ground-water withdrawals on stream base flow was done by the U.S. Geological Survey (USGS) in cooperation with the U.S. Environmental Protection Agency (USEPA) and the Delaware River Basin Commission as part of the USEPA?s Framework for Sustainable Watershed Management Initiative. Two models were used. A Soil and Water Assessment Tool (SWAT) model developed by the USEPA provided areal recharge values for 2000 land use and projected full buildout land use. The USGS MODFLOW-2000 ground-water-flow model was used to estimate the effect of reduced recharge from changes in land use and additional ground-water withdrawals on stream base flow. This report describes the ground-water-flow-model simulations. The Pocono Creek watershed is underlain by sedimentary rock of Devonian age, which is overlain by a veneer of glacial deposits. All water-supply wells are cased into and derive water from the bedrock. In the ground-water-flow model, the surficial geologic units were grouped into six categories: (1) moraine deposits, (2) stratified drift, (3) lake deposits, (4) outwash, (5) swamp deposits, and (6) undifferentiated deposits. The unconsolidated surficial deposits are not used as a source of water. The ground-water and surface-water systems are well connected in the Pocono Creek watershed. Base flow measured on October 13, 2004, at 27 sites for model calibration showed that streams gained water between all sites measured except in the lower reach of Pocono Creek. The ground-water-flow model included the entire Pocono Creek watershed. Horizontally, the modeled area was divided into a 53 by 155 cell grid with 6,060 active cells. Vertically, the modeled area was discretized into four layers. Layers 1 and 2 represented the unconsolidated surficial deposits where they are present and bedrock where the surficial deposits are absent. Layer 3 represented shallow bedrock and was 200 ft (feet) thick. Layer 4 represented deep bedrock and was 300 ft thick. A total of 873 cells representing streams were assigned to layer 1. Recharge rates for model calibration were provided by the USEPA SWAT model for 2000 land-use conditions. Recharge rates for 2000 for the 29 subwatersheds in the SWAT model ranged from 6.11 to 22.66 inches per year. Because the ground-water-flow model was calibrated to base-flow data collected on October 13, 2004, the 2000 recharge rates were multiplied by 1.18 so the volume of recharge was equal to the volume of streamflow measured at the mouth of Pocono Creek. During model calibration, adjustments were made to aquifer hydraulic conductivity and streambed conductance. Simulated base flows and hydraulic heads were compared to measured base flows and hydraulic heads using the root mean squared error (RMSE) between measured and simulated values. The RMSE of the calibrated model for base flow was 4.7 cubic feet per second for 27 locations, and the RMSE for hydraulic heads for 15 locations was 35 ft. The USEPA SWAT model was used to provide areal recharge values for 2000 and full buildout land-use conditions. The change in recharge ranged from an increase of 37.8 percent to a decrease of 60.8 percent. The ground-water-flow model was used to simulate base flow for 2000 and full buildout land-use conditions using steady-state simulations. The decrease in simulated base flow ranged from 3.8 to 63 percent at the streamflow-measurement sites. Simulated base flow at streamflow-gaging station Pocono Creek above Wigwam Run near Stroudsburg, Pa. (01441495), decreased 25 percent. This is in general agreement with the SWAT model, which estimated a 30.6-percent loss in base flow at the streamflow-gaging station.

Scientific Investigations Report↗
USGS2005

Influence of geologic setting on ground-water availability in the Lawrenceville area, Gwinnett County, Georgia

Obtaining large quantities of ground water needed for municipal and industrial supply in the Piedmont and Blue Ridge physiographic provinces can be challenging because of the complex geology and the typically low primary permeability of igneous and metamorphic rocks. Areas of enhanced secondary permeability in the bedrock do occur, however, and 'high-yield' wells are not uncommon, particularly where careful site-selection techniques are used prior to test drilling. The U.S. Geological Survey - in cooperation with the City of Lawrenceville, Georgia - conducted this study from 2000 to 2002 to learn more about how different geologic settings influence the availability of ground water in igneous and metamorphic bedrock with the expectation that this knowledge could be used to help identify additional water resources in the area. In compositionally layered-rock settings, wells derive water almost exclusively from lithologically and structurally controlled water-bearing zones formed parallel to foliation and compositional layering. These high-permeability, water-bearing zones - termed foliation-parallel parting systems -combined with high-angle joint systems, are the primary control for the high-yield wells drilled in the Lawrenceville area; yields range from 100 to several hundred gallons per minute (gal/min). Near Lawrenceville, areas with high ground-water yield are present in sequences of amphibolite, biotite gneiss, and button schist where the structural attitude of the rocks is gently dipping, in areas characterized by abundant jointing, and in topographic settings with a continuous source of recharge along these structures. In massive-rock settings, wells derive water mostly from joint systems, although foliation-parallel parting systems also may be important. Wells deriving water primarily from steeply-dipping joint systems typically have low yields ranging from 1 to 5 gal/min. Joint systems in massive-rock settings can be identified and characterized by using many of the methods described in this report. Geologic mapping was the primary method used to determine the distribution, variability, and relative concentrations (intensity) of joint systems. In the subsurface, joints were characterized by taking orientation measurements in the open boreholes of wells using acoustic and/or optical televiewers. In this investigation, the only practical approach found for locating areas of high ground-water potential was first through detailed geologic mapping followed by test drilling, borehole geophysical logging, and aquifer testing. Geologic methods help characterize both large- and small-scale structures and other lithologic and stratigraphic features that influence development of increased secondary permeability in the bedrock. The rock types, discontinuities, depth of weathering, topographic position, and recharge potential - which were the principal factors assessed through detailed geologic mapping - must be evaluated carefully, in relation to one another, to assess the ground-water potential in a given area.

Georgia↗
USGS1995

Selected hydrologic data for the Mesilla ground-water basin, 1987 through 1992 water years, Doña Ana County, New Mexico, and El Paso County, Texas

The Mesilla ground-water basin monitoring program was established in 1987 to document hydrologic conditions and establish a long-term, continuous data base to permit future quantitative evaluation of the ground-water flow system and stream/aquifer relations. Data collection is divided into three program elements. These are the (1) Mesilla ground- water basin observation-well program; (2) Mesilla Valley hydrologic sections; and (3) Rio Grande seepage investigations. This report is a compilation of hydrologic data collected for the Mesilla ground- water basin monitoring program during the 1987 through 1992 water years. Hydrologic data presented in the report include well records and water levels for 181 wells; mean daily river stage and ground- water levels at 37 sites; seepage investigations of the Rio Grande from Radium Springs, New Mexico, to El Paso, Texas; and chemical analyses of 29 water samples collected from the Rio Grande.

New Mexico, Texas↗
USGS2007

Hydrogeologic settings and ground-water flow simulations for regional studies of the Transport of Anthropogenic and Natural Contaminants to public-supply wells - Studies begun in 2001

This study of the Transport of Anthropogenic and Natural Contaminants to public-supply wells (TANC study) is being conducted as part of the U.S. Geological Survey National Water Quality Assessment (NAWQA) Program and was designed to increase understanding of the most important factors to consider in ground-water vulnerability assessments. The seven TANC studies that began in 2001 used retrospective data and ground-water flow models to evaluate hydrogeologic variables that affect aquifer susceptibility and vulnerability at a regional scale. Ground-water flow characteristics, regional water budgets, pumping-well information, and water-quality data were compiled from existing data and used to develop conceptual models of ground-water conditions for each study area. Steady-state regional ground-water flow models were used to represent the conceptual models, and advective particle-tracking simulations were used to compute areas contributing recharge and traveltimes from recharge to selected public-supply wells. Retrospective data and modeling results were tabulated into a relational database for future analysis. Seven study areas were selected to evaluate a range of hydrogeologic settings and management practices across the Nation: the Salt Lake Valley, Utah; the Eagle Valley and Spanish Springs Valley, Nevada; the San Joaquin Valley, California; the Northern Tampa Bay region, Florida; the Pomperaug River Basin, Connecticut; the Great Miami River Basin, Ohio; and the Eastern High Plains, Nebraska. This Professional Paper Chapter presents the hydrogeologic settings and documents the ground-water flow models for each of the NAWQA TANC regional study areas that began work in 2001. Methods used to compile retrospective data, determine contributing areas of public-supply wells, and characterize oxidation-reduction (redox) conditions also are presented. This Professional Paper Chapter provides the foundation for future susceptibility and vulnerability analyses in the TANC study areas and comparisons among regional aquifer systems. The report is organized in sections. In addition to the introductory section (Section 1) are seven sections that present the hydrogeologic characterization and ground-water flow model documentation for each TANC regional study area (Sections 2 through 8). Abstracts in Sections 2 through 8 provide summaries and major findings for each regional study area.

Professional Paper↗
USGS1995

Numerical Simulation of Regional Changes in Ground-Water Levels and in the Freshwater-Saltwater Interface Induced by Increased Pumpage at Barbers Point Shaft, Oahu, Hawaii

The effect on the regional ground-water system of southern Oahu from increased pumpage at Barbers Point shaft was estimated by a numerical ground-water model developed for the Oahu Regional Aquifer Systems Analysis (RASA) study. The RASA model was updated by revising pumping and ground-water recharge data. Pumpage data used in the new simulations were based on the allocated pumping rates for 1995 as set by the State Commission on Water Resource Management. On the basis of numerical simulation, Barbers Point shaft can sustain a withdrawal rate of 4.34 million gallons per day without adversely affecting wells in the Waianae aquifer. From results of numerical simulations, it is estimated that, as a result of increasing pumpage in Barbers Point shaft by 2 million gallons per day above the 1995-allocated rate of 2.337 million gallons per day, regional declines in ground-water levels will be about 0.4 to 0.7 feet throughout the Waianae aquifer and about 0.8 ft at the shaft. The corresponding rise of the freshwater-saltwater interface, as a result of declines in ground-water levels, is estimated to be about 20 to 30 feet. Numerical simulation also indicates that changes in ground-water levels greater than about 0.1 feet do not extend across either the Waianae-Koolau unconformity or the south Schofield barrier. The model-estimated position of the freshwater-saltwater interface, as a result of additional pumpage, ranges from 500 to 860 feet below sea level in the southern and northern parts of the aquifer, respectively, and about 540 feet below sea level at the shaft. On the basis of an estimate of the thickness of the transition-zone, the freshwater lens would remain about 240 feet thick below the shaft. In addition, the estimated declines in ground-water levels throughout the aquifer are small compared with the thickness of the freshwater lens and these declines would not be expected to affect the yields of other wells in terms of quantity. Chloride concentrations in the water pumped at Barbers Point shaft were about 240 milligrams per liter in 1992. The estimated background chloride concentration is 200 to 220 milligrams per liter because of low rainfall and the contamination of recharge water from natural salt accumulation in the soil. A reduction in irrigation through 1995 is expected to reduce recharge to the aquifer from irrigation-return water and chloride concentrations associated with the irrigation water throughout the Waianae aquifer. As a result of these combined effects, chloride concentrations of water pumped from the Barbers Point shaft will likely decrease, although the length of time required for this lowering is unknown.

Water-Resources Investigations Report↗
USGS1997

Detecting changes in the spatial distribution of nitrate contamination in ground water

Many studies of ground water pollution in general and nitrate contamination in particular have often relied on a one-time investigation, tracking of individual wells, or aggregate summaries. Studies of changes in spatial distribution of contaminants over time are lacking. This paper presents a method to compare spatial distributions for possible changes over time. The large-scale spatial distribution at a given time can be considered as a surface over the area (a trend surface). The changes in spatial distribution from period to period can be revealed by the differences in the shape and/or height of surfaces. If such a surface is described by a polynomial function, changes in surfaces can be detected by testing statistically for differences in their corresponding polynomial functions. This method was applied to nitrate concentration in a population of wells in an agricultural drainage basin in Iowa, sampled in three different years. For the period of 1981-1992, the large-scale spatial distribution of nitrate concentration did not show significant change in the shape of spatial surfaces; while the magnitude of nitrate concentration in the basin, or height of the computed surfaces showed significant fluctuations. The change in magnitude of nitrate concentration is closely related to climatic variations, especially in precipitation. The lack of change in the shape of spatial surfaces means that either the influence of land use/nitrogen management was overshadowed by climatic influence, or the changes in land use/management occurred in a random fashion.

Journal of the American Water Resources Associatio↗
USGS1996

Hydrogeology and ground-water quality of the chromic acid pit site, U.S. Army Air Defense Artillery Center and Fort Bliss, El Paso, Texas

The Chromic Acid Pit site is an inactive waste disposal site that is regulated by the Resource Conservation and Recovery Act of 1976. The 2.2-cubic-yard cement-lined pit was operated from 1980 to 1983 by a contractor to the U.S. Army Air Defense Artillery Center and Fort Bliss. The pit, located on the Fort Bliss military reservation, in El Paso, Texas, was used for disposal and evaporation of chromic acid waste generated from chrome plating operations. The site was certified closed in 1989 and the Texas Natural Resources Conservation Commission issued Permit Number HW-50296 (U.S. Environmental Protection Agency Permit Number TX4213720101), which approved and implemented post-closure care for the Chromic Acid Pit site. In accordance with an approved post-closure plan, the U.S. Geological Survey is cooperating with the U.S. Army in evaluating hydrogeologic conditions and ground- water quality at the site. One upgradient and two downgradient ground-water monitoring wells were installed adjacent to the chromic acid pit by a private contractor. Quarterly ground-water sampling of these wells by the U.S. Geological Survey began in December 1993. The Chromic Acid Pit site is situated in the Hueco Bolson intermontane valley. The Hueco Bolson is a primary source of ground water in the El Paso area. City of El Paso and U.S. Army water-supply wells are located on all sides of the study area and are completed 600 to more than 1,200 feet below land surface. The ground-water level in the area of the Chromic Acid Pit site has declined about 25 feet from 1982 to 1993. Depth to water at the Chromic Acid Pit site in September 1994 was about 284 feet below land surface; ground-water flow is to the southeast. Ground-water samples collected from monitoring wells at the Chromic Acid Pit site contained dissolved-solids concentrations of 442 to 564 milligrams per liter. Nitrate as nitrogen concentrations ranged from 2.1 to 2.7 milligrams per liter; nitrite plus nitrate as nitrogen concentrations ranged from 2.3 to 3.0 milligrams per liter. Nitrate concentrations are abnormally high in the Old Mesa well field located about 5,000 feet southwest of the Chromic Acid Pit site. Volatile and semivolatile organic compounds in water samples were analyzed for the first sampling round; no confirmed volatile or semivolatile organic compounds were detected above the laboratory reporting limits. Total chromium concentrations ranged from 0.0099 to 0.092 milligram per liter; dissolved chromium concentrations ranged from 0.0068 to 0.0094 milligram per liter. Overall, water-quality characteristics in water from the chromic acid pit ground-water monitoring wells are similar to those in the surrounding area. Detected chemical concentrations in water from the chromic acid pit monitoring wells during the four sampling periods were below U.S. Environmental Protection Agency-established maximum contaminant levels for public drinking water supplies. Statistical analyses were performed on 39 of the chemical constituents analyzed for in ground water from the chromic acid pit monitoring wells. Concentrations of chloride and fluoride were significantly less in water from the downgradient wells than in water from the upgradient well, whereas concentrations of nitrate as nitrogen, nitrite plus nitrate as nitrogen, and dissolved solids were significantly greater in water from the downgradient wells than in water from the upgradient well. Concentrations of nitrate as nitrogen were significantly different in water from the two downgradient wells. Differences detected through statistical analysis of chemical constituents of water in the chromic acid pit monitoring wells did not appear to indicate a release of hazardous chemicals from the chromic acid pit. There was no indication of ground-water contamination in either downgradient well.

Texas↗
USGS1961

Geology and ground-water resources of Sumner County, Kansas

This report describes the geography, geology, and ground-water resources of Sumner County in south-central Kansas. The hydrologic and geologic data upon which this report is based were obtained in the field during the summers of 1955 and 1956. Records of 300 wells and 2 springs, chemical analyses of 219 water samples from wells and test holes and of 15 from streams, and logs of 362 wells and test holes are included in tables. Sumner County has an area of 1,183 square miles and lies in the Wellington Lowland and Arkansas River Lowlands of the Central Lowland physiographic province. It is drained by Arkansas River, Ninnescah River, and Chikaskia River and their tributaries. The land surface in general is a southeastward-sloping, gently rolling plain. The average annual precipitation at Wellington is about 31 inches. Wheat fanning is the principal industry of the county, and oil is the chief natural resource. The Wellington Formation, of Permian age, crops out in the eastern two-thirds of the county except where it is covered by Pleistocene deposits. The Ninnescah Shale (Permian) overlies the Wellington Formation and crops out in parts of the western third of the county. The Permian rocks yield small quantities of hard water to wells. Pleistocene sand and gravel deposits of Nebraskan age are present in the northwestern corner of the county and yield moderate quantities of good water to wells. Discontinuous deposits of Kansan or Illinoisan age, locally mantled by colluvium, forms terraces in southern and eastern Sumner County, and may yield moderate quantities of water. Wisconsinan terrace deposits and Recent alluvium along the major streams yield large quantities of water. Colluvium and dune sand are unimportant as sources of water but may facilitate recharge. Maps of Sumner County included in this report show the outcrop areas of the formations, geologic cross sections, the shape and slope of the water table, the locations of wells and test holes for which records are given, and the distribution of chloride in water samples. The ground-water reservoir is recharged principally from rain and snow that fall within the county, by percolation from streams and other surface bodies of water, and by underflow from adjacent areas. Water is discharged from the ground-water reservoir by seepage into streams, by transpiration and evaporation, by movement into adjacent areas, and by wells. Water is pumped from wells for domestic, stock, municipal, industrial, and irrigation use. Irrigation from wells is most extensive in the valley of Arkansas River, in which area further development is most probable. Chemical analyses of samples of water from Sumner County indicate that the quality varies greatly from place to place. Sulfate is common in water from the Wellington Formation and Ninnescah Shale. Water from Pleistocene deposits is generally suitable for most uses except in local areas where it contains excessive chloride.

Kansas Geological Survey Bulletin↗
USGS2008

Hydrographs showing ground-water level trends for selected wells in the Yakima River basin aquifer system, Washington

Selected ground-water level hydrographs for the Yakima River basin aquifer system, Washington, are presented in an interactive web-based map to illustrate the existence or lack of trends in ground-water levels and, thus, potential variations in ground-water availability in the area. Hydrographs are linked to points corresponding to the well location on an interactive map of the study area. Ground-water level data and well information from Federal, State, and local agencies were obtained from the U.S. Geological Survey National Water Information System. Selected data points were excluded from hydrographs to emphasize long-term term trends over short-term effects of human activity (such as pumping a well) and seasonal fluctuations in ground-water levels.

Washington↗
USGS2007

Streambed infiltration and ground-water flow from the Trout Creek drainage, an intermittent tributary to the Humboldt River, north-central Nevada

Ground water is abundant in many alluvial basins of the Basin and Range Physiographic Province of the western United States. Water enters these basins by infiltration along intermittent and ephemeral channels, which originate in the mountainous regions before crossing alluvial fans and piedmont alluvial plains. Water also enters the basins as subsurface ground-water flow directly from the mountains, where infiltrated precipitation recharges water-bearing rocks and sediments at these higher elevations. Trout Creek, a typical intermittent stream in the Middle Humboldt River Basin in north-central Nevada, was chosen to develop methods of estimating and characterizing streambed infiltration and ground-water recharge in mountainous terrains. Trout Creek has a drainage area of about 4.8 × 10 7 square meters. Stream gradients range from more than 1 × 10 –1 meter per meter in the mountains to 5 × 10 –3 meter per meter at the foot of the piedmont alluvial plain. Trout Creek is perennial in short reaches upstream of a northeast-southwest trending normal fault, where perennial springs discharge to the channel. Downstream from the fault, the water table drops below the base of the channel and the stream becomes intermittent. Snowmelt generates streamflow during March and April, when streamflow extends onto the piedmont alluvial plain for several weeks in most years. Rates of streambed infiltration become highest in the lowest reaches, at the foot of the piedmont alluvial plain. The marked increases in infiltration are attributed to increases in streambed permeability together with decreases in channel-bed armoring, the latter which increases the effective area of the channel. Large quartzite cobbles cover the streambed in the upper reaches of the stream and are absent in the lowest reach. Such changes in channel deposits are common where alluvial fans join piedmont alluvial plains. Poorly sorted coarse and fine sediments are deposited near the head of the fan, while finer-grained but better sorted gravels and sands are deposited near the foot. All flow in Trout Creek is lost to infiltration in the upper and middle reaches of the channel during years of normal to below-normal precipitation. During years of above-normal precipitation, streamflow extends beyond the piedmont alluvial plain to the lower reaches of the channel, where high rates of infiltration result in rapid stream loss. The frequency and duration of streambed infiltration is sufficient to maintain high water contents and low chloride concentrations, compared with interchannel areas, to depths of at least 6 m beneath the channel. Streamflow, streambed infiltration, and unsaturated-zone thickness are all highly variable along intermittent streams, resulting in recharge that is highly variable as well. Average annual ground-water recharge in the mountainous part of the Trout Creek drainage upstream of Marigold Mine was estimated on the basis of chloride balance to be 5.2 × 10 5 cubic meters. Combined with an average annual surface runoff exiting the mountains of 3.4 × 10 5 cubic meters, the total annual volume of inflow to alluvial-basin sediments from the mountainous part of the Trout Creek is 8.6 × 10 5 cubic meters, assuming that all runoff infiltrates the stream channel. This equates to about 7 percent of average annual precipitation, which is about the same percentage estimated for ground-water recharge using the original Maxey-Eakin method.

Nevada↗
USGS2006

Development and application of a regression equation for estimating the occurrence of atrazine in shallow ground water beneath agricultural areas of the United States

Results from 52 ground-water studies throughout the United States were used to examine relations between the occurrence of atrazine in shallow ground water in agricultural settings and explanatory variables that describe the natural setting, agricultural-management practices, and the type and amount of development in each area. The explanatory variables that were found to be correlated with atrazine occurrence were soil-infiltration rates, presence of artificial drainage (tile drains or trenches), available water-holding capacity of soils, soil permeability, amount of study area using ground water for irrigation source (as percentage of total area), amount of agricultural land (as percentage of total area), and intensity of atrazine use. Ordinary least-squares regression equations that used one or more of these explanatory variables describe as much as 58 percent of the variation in atrazine-detection frequencies. Application of a multivariate equation to unmonitored agricultural areas across the conterminous United States illustrates that atrazine use alone is insufficient for estimating the occurrence of atrazine in shallow ground water. Instead, areas in which soil characteristics and agricultural-management practices favor the movement of water from land surface to the water table and that also have intensive atrazine use are the most vulnerable to atrazine contamination.

Scientific Investigations Report↗
USGS1995

Radon-222 concentrations in ground water and soil gas on Indian reservations in Wisconsin

The weighted average radon-222 concentration of indoor air in homes located on Wisconsin Indian Reservations is 5.8 picocuries per liter, which exceeds the U.S. Environmental Protection Agency action limit of 4 picocuries per liter. Ground water is the principle source of drinking water on Wisconsin Indian Reservations and generally accounts for about 5 percent of the total indoor air radon-222 concentrations found in homes. To determine the distribution of radon-222, ground water from 29 private and community Wisconsin Indian Reservation wells and soil gas at a depth of about 3 feet below land surface adjacent to the wells were sampled. Sites with wells were distributed among the 11 Wisconsin Indian Reservations so that each Reservation contained at least 2 sites. The remaining seven sites were divided among the Reservation by acreage held by each tribe. Ground-water samples were collected using a syringe technique after the wells had been purged sufficiently to reach chemical stability. Samples were then sent by overnight mail to the U.S. Geological Survey, National Water Quality Lab for analysis by liquid scintillation counting. Soil gas was collected in Lucas cells, using a small-diameter soil probe and peristaltic pump. The cells were then analyzed by Lucas cell alpha scintillation counting with a portable radon detector. The highest radon-222 concentrations in ground water and soil gas are from sites with wells finished in the crystalline bedrock aquifer. Radon-222 concentrations in 29 ground-water samples collected from the sand and gravel and sedimentary and crystalline bedrock aquifers range from 260 to 22,000 picocuries per liter with a median concentration of 560 picocuries per liter. Only 2 of the 29 ground-water samples have radon-222 concentrations less than the U.S. Environmental Protection Agency proposed standard of 300 picocuries per liter. The highest radon-222 concentrations were found in ground water from wells in Shawano, Menominee, Forest, and Marathon counties. Radon-222 concentrations in soil gas range from 130 to 7,810 picocuries per liter with a median concentration of 560 picocuries per liter. For sites with wells finished in the sand and gravel aquifer, the coefficient of determination (R2) of the regression of concentration of radon-222 in ground water as a function of well depth is 0.003 and the significance level is 0.32, which indicates that there is not a statistically significant relation between radon-222 concentrations in ground water and well depth. The coefficient of determination of the regression of radon-222 in ground water and soil gas is 0.19 and the root mean square error of the regression line is 271 picocuries per liter. Even though the significance level (0.036) indicates a statistical relation, the root mean square error of the regression is so large that the regression equation would not give reliable predictions. Because of an inadequate number of samples, similar statistical analyses could not be performed for sites with wells finished in the crystalline and sedimentary bedrock aquifers.

Wisconsin↗
USGS2009

Processing, Analysis, and General Evaluation of Well-Driller Logs for Estimating Hydrogeologic Parameters of the Glacial Sediments in a Ground-Water Flow Model of the Lake Michigan Basin

In 2005, the U.S. Geological Survey began a pilot study for the National Assessment of Water Availability and Use Program to assess the availability of water and water use in the Great Lakes Basin. Part of the study involves constructing a ground-water flow model for the Lake Michigan part of the Basin. Most ground-water flow occurs in the glacial sediments above the bedrock formations; therefore, adequate representation by the model of the horizontal and vertical hydraulic conductivity of the glacial sediments is important to the accuracy of model simulations. This work processed and analyzed well records to provide the hydrogeologic parameters of horizontal and vertical hydraulic conductivity and ground-water levels for the model layers used to simulated ground-water flow in the glacial sediments. The methods used to convert (1) lithology descriptions into assumed values of horizontal and vertical hydraulic conductivity for entire model layers, (2) aquifer-test data into point values of horizontal hydraulic conductivity, and (3) static water levels into water-level calibration data are presented. A large data set of about 458,000 well driller well logs for monitoring, observation, and water wells was available from three statewide electronic data bases to characterize hydrogeologic parameters. More than 1.8 million records of lithology from the well logs were used to create a lithologic-based representation of horizontal and vertical hydraulic conductivity of the glacial sediments. Specific-capacity data from about 292,000 well logs were converted into horizontal hydraulic conductivity values to determine specific values of horizontal hydraulic conductivity and its aerial variation. About 396,000 well logs contained data on ground-water levels that were assembled into a water-level calibration data set. A lithology-based distribution of hydraulic conductivity was created by use of a computer program to convert well-log lithology descriptions into aquifer or nonaquifer categories and to calculate equivalent horizontal and vertical hydraulic conductivities (K and KZ, respectively) for each of the glacial layers of the model. The K was based on an assumed value of 100 ft/d (feet per day) for aquifer materials and 1 ft/d for nonaquifer materials, whereas the equivalent KZ was based on an assumed value of 10 ft/d for aquifer materials and 0.001 ft/d for nonaquifer materials. These values were assumed for convenience to determine a relative contrast between aquifer and nonaquifer materials. The point values of K and KZ from wells that penetrate at least 50 percent of a model layer were interpolated into a grid of values. The K distribution was based on an inverse distance weighting equation that used an exponent of 2. The KZ distribution used inverse distance weighting with an exponent of 4 to represent the abrupt change in KZ that commonly occurs between aquifer and nonaquifer materials. The values of equivalent hydraulic conductivity for aquifer sediments needed to be adjusted to actual values in the study area for the ground-water flow modeling. The specific-capacity data (discharge, drawdown, and time data) from the well logs were input to a modified version of the Theis equation to calculate specific capacity based horizontal hydraulic conductivity values (KSC). The KSC values were used as a guide for adjusting the assumed value of 100 ft/d for aquifer deposits to actual values used in the model. Water levels from well logs were processed to improve reliability of water levels for comparison to simulated water levels in a model layer during model calibration. Water levels were interpolated by kriging to determine a composite water-level surface. The difference between the kriged surface and individual water levels was used to identify outlier water levels. Examination of the well-log lithology data in map form revealed that the data were not only useful for model input, but also were useful for understanding th

Scientific Investigations Report↗
USGS2001

An estimate of chemical loads from ground water to the Grand Calumet River and Indiana Harbor Canal, northwestern Indiana

Chemical loads from ground water to the Grand Calumet River and the Indiana Harbor Canal in northwestern Indiana were estimated to aid in determining the total maximum daily load. Data from two previous studies, completed in 1987 and 1993, were used to compute loads. The first study included a ground-water-flow model. Results from this model were used to determine ground-water fluxes to eight distinct reaches of the Grand Calumet River and the Indiana Harbor Canal at assumed horizontal hydraulic conductivities of 50 and 100 feet per day. In addition, water quality data collected during the first study and a second study that further described the quality of water from wells screened in the Calumet aquifer, were used with the ground-water fluxes to compute estimates of chemical loads for selected constituents contributing to the Grand Calumet River and Indiana Harbor Canal. Constituents included trace elements, polychlorinated biphenyls, pesticides, polynuclear aromatic hydrocarbons, and selected general chemistry properties. Total dissolved solids, sulfate, chloride, and dissolved ammonia as nitrogen had the largest estimated loads to the Grand Calumet River and the Indiana Harbor Canal for any river reach. The estimated loads for total dissolved solids ranged from 239 to 12,800 kilograms per day. Dissolved iron had the largest estimated load for the trace elements and exceeded 1 kilogram per day for all river reaches for which data were available. The majority of ground-water concentrations for polychlorinated biphenyls, pesticides, and polynuclear aromatic hydrocarbons were reported as less than the method reporting limit, resulting in small computed loads to the river and canal.

Indiana↗
USGS1994

Hydrogeologic framework and preliminary simulation of ground-water flow in the Mimbres Basin, southwestern New Mexico

The bolson-fill aquifer, the major water-yielding unit in the Mimbres Basin, southwestern New Mexico, ranges in thickness from 0 to about 3,700 feet. Recharge to the bolson-fill aquifer occurs by infiltration of ephemeral streams that cross the basin margin, infiltration from precipitation and streamflow, ground-water underflow from adjacent basins, and infiltration of springflow from adjacent bedrock units within the basin. Ground water generally flows southward from the northern highland areas of the basin. Ground-water discharge consists of pumpage from wells, transpiration by plants, outflow to playas and springs in the Los Muertos Basin in Mexico, discharge to the Mimbres River, and ground-water flow to the Mesilla Basin near Mason Draw. Before 1910, ground-water recharge and discharge were approximately equal; by 1975, however, about 75 percent of the 146,000 acre-feet withdrawn annually was ground water, most of it from aquifer storage. The transmissivity of the bolson-fill aquifer determined from aquifer tests and specific-capacity data ranges from 10 to 50,000 feet squared per day. Hydraulic conductivity, calculated from saturated thickness and transmissivity, ranges from 0.03 to 800 feet per day, with median values of about 18 feet per day in the Deming area and 6 feet per day elsewhere. Reported storage-coefficient values representing confined parts of the aquifer range from 0.00036 to 0.0036, and those representing unconfined parts of the aquifer range from 0.02 to 0.24. Water quality in the north and central parts of the Mimbres Basin is suitable for most uses. Due to its large salinity and alkalinity, some of the ground water in the south and southeastern areas of the bolson-fill aquifer may not be suitable for irrigation or domestic use. A preliminary two-dimensional digital model was constructed to evaluate ground-water flow in the bolson-fill aquifer. The model was divided into zones of uniform hydraulic conductivity corresponding to the major structural elements of the basin. For simulation purposes, hydraulic conductivity in the central part of the basin ranged from 2.2 to 4.4 feet per day, whereas locally along the edges of the aquifer less certain values ranged from 0.003 to 62 feet per day Analysis of the results of this predevelopment model indicated that use of the mountain-front recharge method overestimates total recharge and that evapotranspiration is substantial. The simulated total inflow was about 55 percent of that estimated in a water budget for the Mimbres Basin. Ground-water development between 1930 and 1985 was simulated using storage-coefficient values of 0.01 and 0.02 for the Gila Conglomerate, 0.04 to 0.17 for bolson-fill deposits, and 0.001 for bolson fill capped with lacustrine clay. The simulated transient water budget indicated that most of the water pumped by 1985 came from storage, and lesser but substantial amounts came from reductions in evapotranspiration.

New Mexico↗