Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67Linked to original sources
USGS1995

Areal distribution of selected trace elements, salinity, and major ions in shallow ground water, Tulare Basin, Southern San Joaquin Valley, California

The distribution of salinity and selected trace elements in shallow ground water in the Tulare Basin, California, was assessed to evaluate potential problems related to disposal in evaporation ponds of irrigation drain water containing elevated concentrations of selenium and other trace elements. The constituents of primary concern were selenium, arsenic, and salinity; uranium, boron, and molybdenum also were evaluated. Samples from 117 shallow wells were analyzed, and the results for samples from 110 of the wells were interpreted in relation to surficial geology, sediment depositional environment, soil characteristics, and hydrologic processes to determine the geochemical and hydrologic factors affecting the distribution of these constituents in ground water. In general, shallow ground water in areas where concentrations of salinity and most trace elements are elevated is influenced primarily by sediments derived from marine sedimentary rocks originating in the Coast Range, San Emigdio Mountains, and Tehachapi Mountains, and probably by unusual exposures of similar marine formations in the Sierra Nevada. Ground water in areas where concentrations of salinity and trace elements are significantly lower generally is influenced by igneous and metamorphic rocks exposed in the Sierra Nevada. In addition to sources of sediments, evaporation of shallow ground water, as indicated by isotopic enrichment of oxygen-18 and deuterium, increases salinity and concentrations of conservative trace elements such as selenium (under oxidizing conditions) and boron. Redox conditions affect the oxidation state of all trace elements of concern, except boron, and were found to be a major influence on trace-element solubility. Under oxidized conditions, selenate predominates and behaves conservatively, and arsenate predominates and is affected by sorption reactions that can limit arsenic solubility. Under reduced conditions, selenium is reduced to insoluble elemental selenium and arsenite predominates and generally is more soluble than arsenate. Elevated concentrations of uranium in shallow ground water probably are associated with uranium deposits in Kern County and other parts of the basin where oxidized conditions cause the more soluble uranyl species to predominate. Boron was correlated with salinity and behaved conservatively, whereas adsorption and precipitation of molybdenum minerals probably limited molybdenum solubility. Interrelations among constituents were examined with principal component analysis. The first two principal components explained 50.7 percent of the variance in the data. The first principal component was related to salinity, and the second principal component was related to redox conditions, reflecting two of the major influences on shallow groundwater quality found in this study.

California↗
USGS2022

Impact of sedimentary basins on Green’s functions for static slip inversion

Earthquakes often occur in regions with complex material structure, such as sedimentary basins or mantle wedges. However, the majority of co-seismic modelling studies assume a simplified, often homogeneous elastic structure in order to expedite the process of model construction and speed up calculations. These co-seismic forward models are used to produce Green’s functions for finite-fault inversions, so any assumptions made in the forward model may introduce bias into estimated slip models. In this study, we use a synthetic model of a sedimentary basin to investigate the impact of 3-D elastic structure on forward models of co-seismic surface deformation. We find that 3-D elastic structure can cause changes in the shape of surface deformation patterns. The magnitude of this effect appears to be primarily controlled by the magnitude of contrast in material properties, rather than the sharpness of contrast, the fault orientation, the location of the fault, or the slip orientation. As examples of real-world cases, we explore the impact of 3-D elastic structure with a model of the Taipei basin in Taiwan and a simulated earthquake on the Sanchaio fault, and with a 3-D geologic model of the San Francisco Bay Area and a slip model of the 1984 Morgan Hill earthquake on the Calaveras fault. Once again, we find that the presence of the basin leads to differences in the shape and amplitude of the surface deformation pattern, but we observe that the primary differences are in the magnitude of surface deformation and can be accounted for with a layered elastic structure. Our results imply that the use of homogeneous Green’s functions may lead to bias in inferred slip models in regions with sedimentary basins, so, at a minimum, a layered velocity structure should be used.

Geophysical Journal International↗
USGS2006

Geology and reconnaissance stable isotope study of the Oyu Tolgoi porphyry Cu-Au system, South Gobi, Mongolia

The Oyu Tolgoi porphyry Cu-Au system in the South Gobi desert, Mongolia, comprises five deposits that extend over 6 km in a north-northeast-oriented zone. They occur in a middle to late Paleozoic are terrane and are related to Late Devonian quartz monzodiorite intrusions. The Hugo Dummett deposits are the northernmost and deepest, with up to 1,000 m of premineral sedimentary and volcanic cover rock remaining. They are the largest deposits discovered to date and characterized by high-grade copper (>2.5% Cu) and gold (0.5-2 g/t) mineralization associated with intense quartz veining and several phases of quartz monzodiorite intruded into basaltic volcanic host rocks. Sulfide minerals in these deposits are zoned outward from a bornite-dominated core to chalcopyrite, upward to pyrite ?? enargite and covellite at shallower depth. The latter high-sulfidation-state sulfides are hosted by advanced argillic alteration mineral associations. This alteration is restricted mainly to dacitic ash-flow tuff that overlies the basaltic volcanic rock and includes ubiquitous quartz and pyrophyllite, kaolinite, plus late dickite veins, as well as K alunite, Al phosphate-sulfate minerals, zunyite, diaspore, topaz, corundum, and andalusite. A reconnaissance oxygen-hydrogen and sulfur isotope study was undertaken to investigate the origin of several characteristic alteration minerals in the Oyu Tolgoi system, with particular emphasis on the Hugo Dummett deposits. Based on the isotopic composition of O, H, and S (??18O(SO4) = 8.8-20.1???, ??D = -73 to -43???, ??34S = 9.8-17.9???), the alunite formed from condensation of magmatic vapor that ascended to the upper parts of the porphyry hydrothermal system, without involvement of significant amounts of meteoric water. The isotopic data indicate that pyrophyllite (??18O = 6.5-10.9???, ??D = -90 to -106???) formed from a magmatic fluid with a component of meteoric water. Muscovite associated with quartz monzodiorite intrusions occurs in the core of the Hugo Dummett deposits, and isotopic data (??18O = 3.0-9.0???, ??D = -101 to -116%o) show it formed from a magmatic fluid with water similar in composition to that which formed the pyrophyllite. Mg chlorite (??18O = 5.5???, ??D = -126???) is a widespread mineral retrograde after hydrothermal biotite and may have formed from fluids similar to those related to the muscovite during cooling of the porphyry system. By contrast, paragenetically later and postmineralization alteration fluid, which produced dickite (??18O = -4.1 to +3.3???, ??D = -130 to -140???), shows clear evidence for mixing with substantial amounts of meteoric water. Relatively low ??D values (-140???) for this meteoric water component may indicate that its source was at high elevations. The geologic structure, nature of alteration, styles of mineralization, and stable isotope data indicate that the Oyu Tolgoi deposits constitute a typical porphyry system formed in an island-arc setting. The outward zonation of sulfide minerals for the Hugo Dummett deposits, from a bornite-dominated core to chalcopyrite and pyrite-enargite, can be interpreted to be related to a cooling magmatic hydrothermal system which transgressed outward over enclosing advanced argillic alteration. This resulted in some unusual alteration and sulfide parageneses, such as topaz, or pyrite, enargite, and tennantite, entrained by high-grade bornite. ?? 2006 by Economic Geology.

Economic Geology↗
USGS1967

Mineral investigations in northeastern Thailand

Fifty-eight mineral prospects of base metals (copper, lead, zinc), iron, manganese, gold, limestone (cement grade), barite, gypsum, and salt were investigated by geological, geophysical, and geochemical surveys, and by pitting, exploratory mining, and diamond drilling from January 1963 to May 1966. Fifty-six of the prospects are in the Loei-Chiengkarn area of northeast Thailand where regional geological, aeromagnetic, and geochemical studies were also performed; the other two prospects are on the Khorat Plateau. The base-metal prospects are in volcanic or carbonate rocks. Four prospects have been tested by diamond drilling; disseminated copper deposits were found at two prospects and local lead-zinc mineralization at the other two.The two copper deposits have estimated proven and probable reserves of 16million tons containing about 1 percent copper, and possible reserves of 62 million tons. The iron prospects are mostly metasomatic, at contacts of granodiorite with sedimentary and volcanic rocks. Four of the iron prospects were tested by diamond drilling; proven, probable, and possible reserves of about 27million tons containing 52 percent iron were developed predominantly in two deposits. Twelve manganese and two gold prospects were investigated, but all are small or low grade. Nonmetallic deposits of barite, gypsum, and limestone (cement grade) were examined in the Loei-Chiengkarn area, and salt was studied at Chaiyaphum. Reserves of approximately 5.5 million tons of barite, half a million tons of gypsum, 12 million tons of limestone (cement grade), and 2,000 million tons of salt were estimated to be present. Economic development of these deposits must await recommended economic feasibility studies and additional geological work, including diamond drilling.

Open-File Report↗
USGS1943

Geology of the Cimarron Range, New Mexico

In north-central New Mexico the rugged Cimarron Range marks the eastern margin of the Southern Rocky Mountains, abruptly rising more than 5000 feet above the adjacent Great Plains. Structurally the range is a northward-plunging anticline with a core of pre-Cambrian crystalline rocks. Faulting along the eastern and western margins of the anticline separates the mountains from the Great Plains and the Moreno Valley. North of Cimarron Canyon the anticline plunges beneath the Tertiary sediments of the Raton Coal Basin. To the south the structure is obscured by the basaltic flows of the Ocaté Mesa. Upturned Paleozoic to Tertiary sedimentary rocks crop out along the eastern and northern margin of the anticlinal uplift. Regional relations are obscured by extensive Tertiary intrusions in the northern portion of the area and by the lava flows to the south. In the valley of Rayado Creek a volcanic plug which fed some of the lava flows has been exposed by erosion. In this region there is evidence for a Mid-Tertiary surface of low relief in the central portion of the mountains, a later lava-capped surface believed to be the equivalent of the Broad Valley Stage, the surface of the Park Plateau, and the Ocate Mesa. Three well-developed gravel-capped Pleistocene pediment surfaces extend steplike from the mountain front into the Great Plains. Both structurally and topographically the Cimarron Range is similar to the Colorado Front Range. An attempt is made to reconstruct the geologic history of the Cimarron Range and to fit it into the broader story of the development of the Southern Rocky Mountains in New Mexico. © 1943 Geological Society of America.

New Mexico↗
USGS1975

Mercury distribution in ancient and modern sediment of northeastern Bering Sea

Reconnaissance sampling of surface and subsurface sediment to a maximum depth of 80 m below the sea floor shows that typical values of 0.03 p.p.m. and anomalies of 0.2-1.3 p.p.m. mercury have been present in northeastern Bering Sea since Early Pliocene time. Values are highest in modern beach (maximum 1.3 and mean 0.22 p.p.m. Hg) and nearshore subsurface gravels (maximum 0.6 and mean 0.06 p.p.m. Hg) along the highly mineralized Seward Peninsula and in clayey silt rich in organic matter (maximum 0.16 and mean 0.10 p.p.m. Hg) throughout the region. Although gold mining may be partly responsible for high mercury levels in the modern beach near Nome, Alaska (maximum 0.45 p.p.m.), equally high or greater concentrations of mercury occur in buried Pleistocene sediments immediately offshore (maximum 0.6 p.p.m.) and in modern unpolluted beach sediments at Bluff (maximum 1.3 p.p.m.); this suggests that the contamination effects of mining may be no greater than natural concentration processes in the Seward Peninsula region. The mercury content of offshore surface sediment, even adjacent to mercury-rich beaches, corresponds to that of unpolluted marine and fresh-water sediment elsewhere. The normal values that prevail offshore may be attributable to entrapment of mercury-bearing heavy minerals on beaches near sources and/or dilution effects of offshore sedimentation. The few minor anomalies offshore occur in glacial drift derived from mercury source regions of Chukotka (Siberia) and Seward Peninsula; Pleistocene shoreline processes have reworked the drift to concentrate the heavy metals. The distribution pattern of mercury indicates that particulate mercury-bearing minerals have not been widely dispersed from onland deposits in quantities sufficient to increase mercury levels above normal in offshore sediments of Bering Sea; however, it shows that natural sedimentary processes can concentrate this mercury in beaches of the coastal zone where there already is concern because of potential pollution from man's activities.

Marine Geology↗
USGS2011

Deciphering fluid sources of hydrothermal systems: A combined Sr- and S-isotope study on barite (Schwarzwald, SW Germany)

Primary and secondary barites from hydrothermal mineralizations in SW Germany were investigated, for the first time, by a combination of strontium (Sr) isotope systematics ( 87 Sr/ 86 Sr), Sr contents and δ 34 S values to distinguish fluid sources and precipitation mechanisms responsible for their formation. Barite of Permian age derived its Sr solely from crystalline basement rocks, whereas all younger barite also incorporate Sr from formation waters of the overlying sediments. In fact, most of the Sr in younger barite is leached from Lower and Middle Triassic sediments. In contrast, most of the sulfur (S) of Permian, Jurassic and northern Schwarzwald Miocene barite originated from basement rocks. The S source of Upper Rhinegraben (URG)-related Paleogene barite differs depending on geographic position: for veins of the southern URG, it is the Oligocene evaporitic sequence, while central URG mineralizations derived its S from Middle Triassic evaporites. Using Sr isotopes of barite of known age combined with estimates on the Sr contents and Sr isotopic ratios of the fluids' source rocks, we were able to quantify mixing ratios of basement-derived fluids and sedimentary formation waters for the first time. These calculations show that Jurassic barite formed by mixing of 75–95% ascending basement-derived fluids with 5–25% sedimentary formation water, but that only 20–55% of the Sr was brought by the basement-derived fluid to the depositional site. Miocene barite formed by mixing of an ascending basement-derived brine (60–70%) with 30–40% sedimentary formation waters. In this case, only 8–15% of the Sr was derived from the deep brine. This fluid-mixing calculation is an example for deposits in which the fluid source is known. This method applied to a greater number of deposits formed at different times and in various geological settings may shed light on more general causes of fluid movement in the Earth's crust and on the formation of hydrothermal ore deposits.

Schwarzwald↗
USGS2011

Pore fluid geochemistry from the Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope

The BPXA-DOE-USGS Mount Elbert Gas Hydrate Stratigraphic Test Well was drilled and cored from 606.5 to 760.1 m on the North Slope of Alaska, to evaluate the occurrence, distribution and formation of gas hydrate in sediments below the base of the ice-bearing permafrost. Both the dissolved chloride and the isotopic composition of the water co-vary in the gas hydrate-bearing zones, consistent with gas hydrate dissociation during core recovery, and they provide independent indicators to constrain the zone of gas hydrate occurrence. Analyses of chloride and water isotope data indicate that an observed increase in salinity towards the top of the cored section reflects the presence of residual fluids from ion exclusion during ice formation at the base of the permafrost layer. These salinity changes are the main factor controlling major and minor ion distributions in the Mount Elbert Well. The resulting background chloride can be simulated with a one-dimensional diffusion model, and the results suggest that the ion exclusion at the top of the cored section reflects deepening of the permafrost layer following the last glaciation (∼100 kyr), consistent with published thermal models. Gas hydrate saturation values estimated from dissolved chloride agree with estimates based on logging data when the gas hydrate occupies more than 20% of the pore space; the correlation is less robust at lower saturation values. The highest gas hydrate concentrations at the Mount Elbert Well are clearly associated with coarse-grained sedimentary sections, as expected from theoretical calculations and field observations in marine and other arctic sediment cores.

Alaska↗
USGS2003

Sediment-starved sand ridges on a mixed carbonate/siliciclastic inner shelf off west-central Florida

High-resolution side-scan mosaics, sediment analyses, and physical process data have revealed that the mixed carbonate/siliciclastic, inner shelf of west-central Florida supports a highly complex field of active sand ridges mantled by a hierarchy of bedforms. The sand ridges, mostly oriented obliquely to the shoreline trend, extend from 2 km to over 25 km offshore. They show many similarities to their well-known counterparts situated along the US Atlantic margin in that both increase in relief with increasing water depth, both are oriented obliquely to the coast, and both respond to modern shelf dynamics. There are significant differences in that the sand ridges on the west-central Florida shelf are smaller in all dimensions, have a relatively high carbonate content, and are separated by exposed rock surfaces. They are also shoreface-detached and are sediment-starved, thus stunting their development. Morphological details are highly distinctive and apparent in side-scan imagery due to the high acoustic contrast. The seafloor is active and not a relict system as indicated by: (1) relatively young AMS 14C dates (< 1600 yr BP) from forams in the shallow subsurface (1.6 meters below seafloor), (2) apparent shifts in sharply distinctive grayscale boundaries seen in time-series side-scan mosaics, (3) maintenance of these sharp acoustic boundaries and development of small bedforms in an area of constant and extensive bioturbation, (4) sediment textural asymmetry indicative of selective transport across bedform topography, (5) morphological asymmetry of sand ridges and 2D dunes, and (6) current-meter data indicating that the critical threshold velocity for sediment transport is frequently exceeded. Although larger sand ridges are found along other portions of the west-central Florida inner shelf, these smaller sand ridges are best developed seaward of a major coastal headland, suggesting some genetic relationship. The headland may focus and accelerate the N-S reversing currents. An elevated rock terrace extending from the headland supports these ridges in a shallower water environment than the surrounding shelf, allowing them to be more easily influenced by currents and surface gravity waves. Tidal currents, storm-generated flows, and seasonally developed flows are shore-parallel and oriented obliquely to the NW-SE trending ridges, indicating that they have developed as described by the Huthnance model. Although inner shelf sand ridges have been extensively examined elsewhere, this study is the first to describe them in a low-energy, sediment-starved, dominantly mixed siliciclastic/carbonate sedimentary environment situated on a former limestone platform. ?? 2003 Elsevier B.V. All rights reserved.

Florida↗
USGS2008

Constraints on the Pleistocene chronology of sediments from the Lomonosov Ridge

Despite its importance in the global climate system, age-calibrated marine geologic records reflecting the evolultion of glacial cycles through the Pleistocene are largely absent from the central Arctic Ocean. This is especially true for sediments older than 200 ka. Three sites cored during the Integrated Ocean Drilling Program's Expedition 302, the Arctic Coring Expedition (ACEX), provide a 27 m continuous sedimentary section from the Lomonosov Ridge in the central Arctic Ocean. Two key biostratigraphic datums and constraints from the magnetic inclination data are used to anchor the chronology of these sediments back to the base of the Cobb Mountain subchron (1215 ka). Beyond 1215 ka, two best fitting geomagnetic models are used to investigate the nature of cyclostratigraphic change. Within this chronology we show that bulk and mineral magnetic properties of the sediments vary on predicted Milankovitch frequencies. These cyclic variations record "glacial" and "interglacial" modes of sediment deposition on the Lomonosov Ridge as evident in studies of ice-rafted debris and stable isotopic and faunal assemblages for the last two glacial cycles and were used to tune the age model. Potential errors, which largely arise from uncertainties in the nature of downhole paleomagnetic variability, and the choice of a tuning target are handled by defining an error envelope that is based on the best fitting cyclostratigraphic and geomagnetic solutions. Copyright 2008 by the American Geophysical Union.

Paleoceanography↗
USGS1992

Jurassic ash-flow sheets, calderas, and related intrusions of the Cordilleran volcanic arc in southeastern Arizona: Implications for regional tectonics and ore deposits

Volcanologic, petrologic, and paleomagnetic studies of widespread Jurassic ash-flow sheets in the Huachuca-southern Dragoon Mountains area have led to identification of four large source calderas and associated comagmatic intracaldera intrusions. Stratigraphic, facies, and contact features of the caldera-related tuffs also provide constraints on the locations, lateral displacements, and very existence for some major northwest-trending faults and inferred regional thrusts in south-eastern Arizona. For example, the intricate Cochise thrust system, as mapped by others in the southern Dragoon Mountains, consists instead of primary depositional contacts within caldera-fill megabreccia, and the inferred regional thrusts do not exist, at least as previously interpreted. Silicic alkalic compositions of the Jurassic caldera-related, ash-flow tuffs; bimodal associated mafic magmatism; and interstratified coarse sedimentary deposits provide evidence for synvolcanic extension and rifting within the Cordilleran magmatic arc. Gold-copper mineralization is associated with subvolcanic intrusions at several of the Jurassic calderas.

Arizona↗
USGS2020

The 2018 update of the US National Seismic Hazard Model: Additional period and site class data

As part of the update of the 2018 National Seismic Hazard Model (NSHM) for the conterminous United States (CONUS), new ground motion and site effect models for the central and eastern United States were incorporated, as well as basin depths from local seismic velocity models in four western US (WUS) urban areas. These additions allow us, for the first time, to calculate probabilistic seismic hazard curves for an expanded set of spectral periods (0.01 to 10 s) and site classes (V S30 = 150 to 1500 m/s) for the CONUS, as well as account for amplification of long-period ground motions in deep sedimentary basins in the Los Angeles, San Francisco Bay, Seattle, and Salt Lake City areas. Two sets of 2018 NSHM hazard data (hazard curves and uniform-hazard ground motions) are available: (1) 0.05°-latitude-by-0.05°-longitude gridded data for the CONUS and (2) higher resolution 0.01°-latitude-by-0.01°-longitude gridded data for the four WUS basins. Both sets of data contain basin effects in the WUS deep sedimentary basins. Uniform-hazard ground motion data are interpolated for 2, 5, and 10% probability of exceedance in 50 years from the hazard curves. The gridded data for the hazard curves and uniform-hazard ground motions, for all periods and site classes, are available for download at the U.S. Geological Survey ScienceBase Catalog ( https://doi.org/10.5066/P9RQMREV ). The design ground motions derived from the hazard curves have been accepted by the Building Seismic Safety Council for adoption in the 2020 National Earthquake Hazard Reduction Program Recommended Seismic Provisions.

California, Utah, Washington↗
USGS1971

An aeromagnetic and aeroradioactivity survey of Liberia, West Africa

A 140,000 km aeromagnetic and total-count gamma radiometric survey was made over Liberia in 1967-68 along north-south lines spaced 0.8 km over land and 4 km over the continental shelf. The data approximately delineate the boundary between the Liberian (ca. 2700 m.y.) age province in the northwestern two-thirds of the country, and the Pan-African (ca. 550 m.y.) age province in the coastal area of the northwestern two-thirds of the country, as well as a boundary marking the northwest extent of the isoclinally folded paragneisses and migmatites deformed within the Eburnean (ca. 2000 m.y.) age province in the southeast one-third. A zone of diabase dikes about 90 km inland can be traced, parallel to the coast from Sierra Leone to Ivory Coast on the basis of the magnetic data. Another zone of diabase dikes about 185 m.y. old is located along the coastal area and beneath the continental shelf parallel to the coast northwest of Greenville. Intrusion of these dikes probably coincides with the separation of Africa from North and South America. The magnetic data suggest basins of sedimentary rocks possibly 5 km thick on the continental shelf. The map indicates high-amplitude magnetic anomalies greater than 600 gammas; some reach amplitudes as great as 18,000 gammas over iron formation and about 1800 gammas over mafic and ultramafic intrusive bodies. The radioactivity data have a background level less than 100 counts per second (cps) over mafic granulite-facies rocks and unmetamorphosed sedimentary rocks in the coastal area. Granitic rocks have the greatest variation. The central area of the country has the highest background radiation level with large areas above 250 cps; the level in the eastern one-third of the country is low. These data are proving quite useful in reconnaissance geologic mapping. All anomalies over 500 cps are shown; some reach amplitudes over 750 cps. Total-count radiation levels have a significant correlation with percent K 2 O in bedrock analyses, but anomalous amounts of Th and U must be present to account for the highest amplitude anomalies. A few specific anomalies have been correlated with concentrations of monazite and zircon in bedrock as well as in beach deposits.

Geophysics↗
USGS2017

Geologic map of the Dusar area, Herat Province, Afghanistan; Modified from the 1973 original map compilations of V.I. Tarasenko and others

The geologic maps and cross sections presented in this report are redrafted and modified versions of the Geologic map and map of useful minerals of the Dusar area (scale 1:50,000) and Geologic sketch map of the Dusar and Namak-sory ore occurrences (scale 1:10,000), located in the Herat Province, Afghanistan. The original maps and cross sections are contained in unpublished Soviet report no. 0290 (Tarasenko and others, 1973) prepared in cooperation with the Ministry of Mines and Industries of the Royal Government of Afghanistan, in Kabul during 1973 under contract no. 50728. The redrafted maps and cross sections (modified from Tarasenko and others, 1973) illustrate the geological structure and mineral occurrences of the Dusar copper-gold-silver-lead-zinc prospect area of western Afghanistan, located within the Dusar-Shaida copper and tin area of interest (AOI), Herat Province, Afghanistan. Mineralization in the Dusar area is hosted within Early Jurassic to Early Cretaceous stratified volcanic and sedimentary rocks associated with numerous diabase and gabbro-diabase intrusive bodies and is generally near a major northeast-trending system of faults and quartz veins. Host rocks consist of quartz keratophyre and quartz-feldspar porphyry, with layers of schist, phyllite, and quartz-chlorite and chlorite-sericite slate; and limestone and shale, with schist and carbonate-chlorite and chlorite slate. Known mineralization includes an extensive quartz vein system, shown on the map as the “northern occurrence,” as well as the Dusar and Namak-sory gossan zones, interpreted to have formed from remnant pyrite mineralization. The veins of the northern occurrence and their altered host rocks are known to contain anomalous to economic concentrations of precious and base metals, with concentrations locally in excess of 2 parts per million gold, 100 parts per million silver, 5 percent copper, and 1 percent lead. These veins occur in swarms, and are hosted along structures that are approximately concordant with the plane of the metamorphic fabric. The veins consist mostly of quartz, with minor carbonate and sulfide minerals, and display weak alteration halos along their margins. The gossans are locally anomalous in these metals, but their size and extent makes them attractive exploration targets for potential massive sulfide mineralization. The Dusar gossan zone is a massive, ochreous, and siliceous limonitic rock, approximately 2,200 meters long, 30 to 250 meters wide, and 2.0 to 7.2 meters thick. Drilling below the Dusar gossan intersected a siliceous, sericitic, and limonitic rock underlain by quartz keratophyre with abundant disseminated pyrite. Mineralized sections grade 0.06 weight percent copper and up to 0.05 weight percent zinc. The Namak-sory gossan zone contains a similar deposit with anomalous concentrations of copper, zinc, and gold. The redrafted maps and cross sections reproduce the topology of rock units, contacts, and faults of the original Soviet maps and cross sections, and include minor modifications based on examination of the originals and observations made during two brief field visits by USGS staff in August, 2010, and June, 2013.

Dusar Area, Herat Province↗
USGS1997

Major structural controls on the distribution of pre-Tertiary rocks, Nevada Test Site vicinity, southern Nevada

The lateral and vertical distributions of Proterozoic and Paleozoic sedimentary rocks in southern Nevada are the combined products of original stratigraphic relationships and post-depositional faults and folds. This map compilation shows the distribution of these pre-Tertiary rocks in the region including and surrounding the Nevada Test Site. It is based on considerable new evidence from detailed geologic mapping, biostratigraphic control, sedimentological analysis, and a review of regional map relationships. Proterozoic and Paleozoic rocks of the region record paleogeographic transitions between continental shelf depositional environments on the east and deeper-water slopefacies depositional environments on the west. Middle Devonian and Mississippian sequences, in particular, show strong lateral facies variations caused by contemporaneous changes in the western margin of North America during the Antler orogeny. Sections of rock that were originally deposited in widely separated facies localities presently lie in close proximity. These spatial relationships chiefly result from major east- and southeastdirected thrusts that deformed the region in Permian or later time. Somewhat younger contractional structures are identified within two irregular zones that traverse the region. These folds and thrusts typically verge toward the west and northwest and overprint the relatively simple pattern of the older contractional terranes. Local structural complications are significant near these younger structures due to the opposing vergence and due to irregularities in the previously folded and faulted crustal section. Structural and stratigraphic discontinuities are identified on opposing sides of two north-trending fault zones in the central part of the compilation region north of Yucca Flat. The origin and significance of these zones are enigmatic because they are largely covered by Tertiary and younger deposits. These faults most likely result from significant lateral offset, most likely in the sinistral sense. Low-angle normal faults that are at least older than Oligocene, and may pre-date Late Cretaceous time, are also present in the region. These faults are shown to locally displace blocks of pre-Tertiary rock by several kilometers. However, none of these structures can be traced for significant distances beyond its outcrop extent, and the inference is made that they do not exert regional influence on the distribution of pre-Tertiary rocks. The extensional strain accommodated by these low-angle normal faults appears to be local and highly irregular.

Nevada↗
USGS2018

Geologic framework and hydrostratigraphy of the Edwards and Trinity aquifers within Hays County, Texas

The Edwards and Trinity aquifers are classified as major aquifers by the Texas Water Development Board and are major sources of water in south-central Texas, where Hays County is located. Detailed maps and descriptions of the geologic framework and hydrostratigraphic units (HSUs) of these karstic aquifers in Hays County are needed for water managers to effectively manage groundwater resources in the area. During 2016–18, the U.S. Geological Survey, in cooperation with the Edwards Aquifer Authority, documented the geologic framework and hydrostratigraphy of the Edwards and Trinity aquifers for a large part of Hays County, characterizing approximately 560 square miles of the county. The report includes a 1:24,000-scale hydrostratigraphic map and descriptions of the geology and HSUs in the study area. In addition, parts of the adjacent upper confining unit to the Edwards aquifer are described. The rocks exposed within the study area are within outcrops of the Trinity and Edwards Groups and the overlying Washita, Eagle Ford, Austin, and Taylor Groups. The rocks are sedimentary and formed during the Cretaceous age. The principal structural feature in Hays County is the Balcones fault zone, which is the result of late Oligocene and early Miocene age high-angle normal faulting and fracturing. Hydrostratigraphically, the exposed rocks represent a section of the upper confining unit to the Edwards aquifer, the Edwards aquifer, the upper zone of the Trinity aquifer, the middle zone of the Trinity aquifer, and the upper part of the lower zone of the Trinity aquifer. Complexity in the aquifer system results from a combination of the original depositional history, bioturbation, primary and secondary porosity, diagenesis, fracturing, and faulting.

Texas↗
USGS2016

Geologic map of the Sauvie Island quadrangle, Multnomah and Columbia Counties, Oregon, and Clark County, Washington

Introduction The Sauvie Island 7.5' quadrangle is situated in the Puget-Willamette Lowland northwest of downtown Portland, Oreg. This lowland, which extends from Puget Sound to west-central Oregon, is a complex structural and topographic trough between the Coast Range and the Cascade Range. Since late Eocene time, the Cascade Range has been the locus of a discontinuously active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. The Coast Range, which occupies the fore-arc position within the Cascadia arc-trench system, consists of a complex assemblage of Eocene to Miocene volcanic and marine sedimentary rocks. The Sauvie Island quadrangle lies along the southwest margin of the Portland Basin, a 2,000-km 2 topographic and structural depression. The basin boundary is an abrupt topographic break at the base of the Tualatin Mountains, which separates the Portland and Tualatin Basins. The Tualatin Mountains are underlain by lava flows of the Miocene Columbia River Basalt Group that have been folded into an asymmetric anticline. Oligocene marine sedimentary rocks, not exposed at the surface, are inferred to underlie the basalt flows. The abrupt basin boundary marks the location of the northwest-striking Portland Hills Fault Zone, which is probably an active structure. The Columbia River flows west and north through the Portland Basin at nearly sea level. The Willamette River enters the Columbia near the southeast corner of the map area. Seismic-reflection profiles and lithologic logs of water wells show as much as 550 m of late Miocene and younger sediments in the deepest part of the basin east of the quadrangle. Deposits exposed at the surface consist chiefly of Holocene and late Pleistocene fluvial and eolian sediments and man-made fill. This map contributes to a U.S. Geological Survey program to improve the geologic database for the Portland region of the Pacific Northwest urban corridor. The map and ancillary data will support assessments of seismic risk, ground-failure hazards, and resource availability.

Oregon, Washington↗
USGS2017

Geologic overview of the Mars Science Laboratory rover mission at the Kimberley, Gale crater, Mars

The Mars Science Laboratory (MSL) Curiosity rover completed a detailed investigation at the Kimberley waypoint within Gale crater from sols 571-634 using its full science instrument payload. From orbital images examined early in the Curiosity mission, the Kimberley region had been identified as a high-priority science target based on its clear stratigraphic relationships in a layered sedimentary sequence that had been exposed by differential erosion. Observations of the stratigraphic sequence at the Kimberley made by Curiosity are consistent with deposition in a prograding, fluvio-deltaic system during the late Noachian to early Hesperian, prior to the existence of most of Mt. Sharp. Geochemical and mineralogic analyses suggest that sediment deposition likely took place under cold conditions with relatively low water-to-rock ratios. Based on elevated K2O abundances throughout the Kimberley formation, an alkali feldspar protolith is likely one of several igneous sources from which the sediments were derived. After deposition, the rocks underwent multiple episodes of diagenetic alteration with different aqueous chemistries and redox conditions, as evidenced by the presence of Ca-sulfate veins, Mn-oxide fracture-fills, and erosion-resistant nodules. More recently, the Kimberley has been subject to significant aeolian abrasion and removal of sediments to create modern topography that slopes away from Mt. Sharp, a process that has continued to the present day.

Journal of Geophysical Research E: Planets↗