Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Progress Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67Linked to original sources
USGS2024

The 3D Elevation Program—Supporting the Texas economy

Introduction High-resolution elevation data for Texas inform decision making to improve the State’s economy. Existing elevation data coverage is used to improve resiliency to natural disasters, manage energy infrastructure, and assess natural resources. The expanding availability of current and more accurate elevation data helps better support natural resources conservation, agriculture and precision farming, flood risk management, infrastructure and construction management, geologic resource assessment and hazard mitigation, coastal zone management, and identification of features of interest or concern, such as archaeological and historic sites. Critical applications that meet the State’s management needs depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features. The 3D Elevation Program (3DEP) is managed by the U.S. Geological Survey (USGS) in partnership with Federal, State, Tribal, U.S. territorial, and local agencies to acquire consistent lidar coverage at quality level 2 or better to meet the many needs of the Nation and Texas. The status of available and in-progress 3DEP baseline lidar data in Texas is shown in figure 1. 3DEP baseline lidar data include quality level 2 or better, 1-meter or better digital elevation models, and lidar point clouds, and must meet the Lidar Base Specification version 1.2 ( https://www.usgs.gov/3dep/lidarspec ) or newer requirements. The National Enhanced Elevation Assessment identified user requirements and conservatively estimated that availability of lidar data would result in at least $53.1 million in new benefits annually to the State. The top 10 Texas business uses for 3D elevation data, which are based on the estimated annual conservative benefits of 3DEP, are shown in table 2.

Texas↗
USGS2025

The 3D Elevation Program—Supporting Vermont's economy

Introduction The geographic information system (GIS) community in Vermont has a long history of interdisciplinary and cooperative projects that have facilitated the leveraging of geospatial technology on myriad data acquisitions across the State. High-resolution elevation data are proving to be a resource of great economic value in dealing with many important issues in Vermont. Vermont attained statewide coverage of quality level 2 coverage of topographic light detection and ranging (lidar) data in 2019. Having access to elevation data that are exponentially more accurate than what was previously available is enabling GIS professionals to better support and empower decision makers in economically important efforts such as environmental protection, public safety, watershed management and water quality, geology, transportation planning, forest and wildlife management, local planning, and flood plain management. In addition, developing a consistent and seamless statewide topographic framework supplants the traditionally time consuming and costly approach of extensive field data collection by requiring less time and money, therefore adding economic benefits. Critical applications that meet the State’s management needs depend on lidar data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features. The 3D Elevation Program (3DEP) is managed by the U.S. Geological Survey (USGS) in partnership with Federal, State, Tribal, U.S. territorial, and local agencies to acquire consistent lidar coverage at quality level 2 or better to meet the many needs of the Nation and Vermont. The status of available and in-progress 3DEP baseline lidar data in Vermont is shown in figure 1. 3DEP baseline lidar data include quality level 2 or better, 1-meter or better digital elevation models, and lidar point clouds, and must meet the Lidar Base Specification version 1.2 ( https://www.usgs.gov/3dep/lidarspec ) or newer requirements. The National Enhanced Elevation Assessment identified user requirements and conservatively estimated that availability of lidar data would result in at least $1.64 million in new benefits annually to the State. The top eight Vermont business uses for 3D elevation data, which are based on the estimated annual conservative benefits of 3DEP, are shown in table 2.

Vermont↗
USGS2025

The 3D Elevation Program—Supporting Louisiana's economy

Introduction Recent and ongoing collections of high-resolution elevation data in Louisiana are providing information that supports improved critical public safety modeling and enables the State to strengthen its efforts to fight the effects of land subsidence and sea-level rise. The availability of current and accurate three-dimensional (3D) elevation data supports numerous business activities, including flood risk management, infrastructure and construction management, coastal zone management, wildlife and habitat management, recreation, agriculture and precision farming, urban and regional planning, water supply and quality assessment, and natural resources conservation. Critical applications that meet the State’s management needs depend on light detection and ranging (lidar) data that provide a highly detailed 3D model of the Earth’s surface and aboveground features. The 3D Elevation Program (3DEP) is managed by the U.S. Geological Survey (USGS) in partnership with Federal, State, Tribal, U.S. territorial, and local agencies to acquire consistent lidar coverage at quality level 2 or better to meet the many needs of the Nation and Louisiana. The status of available and in-progress 3DEP baseline lidar data in Louisiana is shown in figure 1. 3DEP baseline lidar data include quality level 2 or better, 1-meter or better digital elevation models, and lidar point clouds, and must meet the Lidar Base Specification version 1.2 ( https://www.usgs.gov/3dep/lidarspec ) or newer requirements. The National Enhanced Elevation Assessment identified user requirements and conservatively estimated that availability of lidar data would result in at least $6.96 million in new benefits annually to the State. The top 10 Louisiana business uses for 3D elevation data, which are based on the estimated annual conservative benefits of 3DEP, are shown in table 2.

Louisiana↗
USGS2025

The 3D Elevation Program—Supporting Tennessee’s economy

Introduction The State of Tennessee has an area of approximately 42,100 square miles and includes six physiographic regions: Blue Ridge, Valley and Ridge, Appalachian Plateaus, Highland Rim, Nashville Basin, and the Gulf Coastal Plains. Up-to-date elevation data support key activities across the State, such as economic development, infrastructure and construction management, agriculture and precision farming, forest resources management, natural resources conservation, flood risk management, emergency management, and urban and regional planning. The State experiences frequent landslides affecting major roadways. High-resolution elevation data can help identify potential landslide-prone areas. Critical applications that meet the State’s management needs depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features. The 3D Elevation Program (3DEP; refer to sidebar) is managed by the U.S. Geological Survey (USGS) in partnership with Federal, State, Tribal, U.S. territorial, and local agencies to acquire consistent lidar coverage at qual-ity level 2 or better to meet the many needs of the Nation and Tennessee. The status of available and in-progress 3DEP baseline lidar data in Tennessee is shown in figure 1. 3DEP baseline lidar data include quality level 2 or better, 1-meter or better digital elevation models, and lidar point clouds, and must meet the Lidar Base Specification version 1.2 ( https://www.usgs.gov/3dep/lidarspec ) or newer requirements. The National Enhanced Elevation Assessment identified user requirements and conservatively estimated that availability of lidar data would result in at least $6.32 million in new benefits annually to the State. The top 10 Tennessee business uses for 3D elevation data, which are based on the estimated annual conservative benefits of 3DEP, are shown in table 2.

Fact Sheet↗
USGS1981

Hydrologic data for urban studies in the Austin, Texas, metropolitan area, 1979

Hydrologic investigations of urban watersheds in Texas were begun by theU.S. Geological Survey in 1954. Studies are now in progress in Austin, Houston, and San Antonio. Studies have been completed in the Dallas and Fort Worth areas. The Geological Survey, in cooperation with the Texas Department of Water Resources, began hydrologic studies in the Austin urban area in 1954. In cooperation with the city of Austin, the program was expanded in 1975 to include additional streamflow and rainfall gaging stations, and the collection of surface water-quality data. In 1978, the program was expanded to include a ground-water resources study of the South Austin metropolitan area in the Balcones fault zone.

Texas↗
USGS1961

Trout hepatoma--a preliminary report

Fish pathology and its role in fish culture were brought into prominence in the spring of 1960 by the disclosure of a high incidence of hepatomas in hatchery-reared rainbow trout. The current problem came to light as the result of a routine inspection of live trout shipments at a California border fish-disease checking station. This service is performed by personnel of the California Department of Fish and Game to preclude the introduction or further spread of communicable fish diseases into California watersheds. Collaborative studies which followed revealed the nationwide distribution of the disease. This unusual disease soon attracted the attention of the Bureau of Sport Fisheries and Wildlife, the Food and Drug Administration, Public Health Service, and several western State health and conservation agencies.

Progressive Fish-Culturist↗
USGS2025

The 3D Elevation Program—Supporting Utah’s economy

Introduction High-quality elevation data for Utah inform decision making to improve the State’s economy. Light detection and ranging (lidar) data are used to support infrastructure planning and management, assess natural resources, and improve resiliency to hazards. The expanding availability of current and more accurate lidar data helps to better support natural resource conservation, wildfire risk management, geologic hazard investigation and mitigation, flood risk management, water supply planning, and urban planning and development. Critical applications that meet the State’s management needs depend on lidar data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features. The 3D Elevation Program is managed by the U.S. Geological Survey in partnership with Federal, State, Tribal, U.S. territorial, and local agencies to acquire consistent lidar coverage at quality level 2 or better to meet the many needs of the Nation and Utah. The status of available and in-progress 3DEP baseline lidar data in Utah is shown in figure 1. 3DEP baseline lidar data include quality level 2 or better, 1-meter or better digital elevation models, and lidar point clouds, and must meet the Lidar Base Specification version 1.2 ( https://www.usgs.gov/3dep/lidarspec ) or newer requirements. The National Enhanced Elevation Assessment identified user requirements and conservatively estimated that availability of lidar data would result in at least $8.70 million in new benefits annually to the State. The top 10 Utah business uses for 3D elevation data, which are based on the estimated annual conservative benefits of 3DEP, are shown in table 2.

Utah↗
USGS2002

Slope evolution at the Calvert Cliffs, Maryland — Measuring the change from eroding bluffs to stable slopes

Despite a long history of geomorphic studies, it is difficult to ascertain the time required for slopes to change from near vertical exposures to relatively stable slopes due to inadequate age control. Actively eroding coastal bluffs along the western shore of the Chesapeake Bay provide a key for understanding the centennial-scale development of stable slopes from eroding bluff faces. The Calvert Cliffs are composed of sandy silts, silty sands, and clayey silts of Miocene-age. Active wave erosion at the bluff toes encourages rapid sloughing from bluff faces and maintains slope angles of 70-80 degrees and relatively constant bluff-retreat rates. Naturally stabilized slopes are preserved as a fossil bluff line inland from a prograding cuspate foreland at Cove Point. The foreland is migrating southward at a rate of ca. 1.5 m/yr. As it moves south, it progressively protects bluffs from wave action as new beaches are deposited at their toes. Wave erosion is reinitiated at the northern end of the complex as the landform passes. An incremental record of slope change is preserved along the fossil bluff line. 14C dating of swales between beach ridges shows the complex to span 1700 years of progressive migration history. We hypothesized that slopes would change from steep, eroding faces to low-angle slopes covered with vegetation and sought to document the rate of change. Our team measured slope angles at intervals along the fossil bluff line and dated profiles by interpolating 14C ages of adjacent beach ridges. There was no progressive decrease in slope with age. All slopes along the fossil bluff line were 30-40 degrees with a mean of 35 degrees. Constancy in slope angle suggests that steep, actively eroding bluffs were quickly changed to stable slopes by landslides and slumping once they were protected. Given the accuracy of our age control, we conclude that the time required to attain a stable slope under natural processes is less than one century. This indicates that once toe erosion is ended (naturally or through engineering) slopes are reduced to 35-degrees over a period of decades and not centuries.

Maryland↗
USGS1976

Stability of highwalls in surface coal mines, western Powder Ridge Basin, Wyoming and Montana

Preliminary results from the first part of a two-part investigation of the stability of highwalls in open-pit coal mines in the Fort Union Formation of the western Powder River Basin of Wyoming and Montana indicate that these highwalls are subject to time-dependent deformation. Field investigations and laboratory physical-properties tests of coal and overburden rocks suggest that several factors influence highwall stability. Some of these factors are rebound of overconsolidated rocks, desiccation, water, orientation and spacing of fractures, and strength and deformation properties. Factors of safety for a typical highwall in the study area (calculated by the finite-element method) may be less than 1.0 when open fractures are present and the highwall has degraded. Although it is concluded that most open-pit mines in the Fort Union Formation within the study area have generally stable highwalls, these highwalls do deteriorate and become progressively less stable. Because of this, postmining failures are common and could be critical if mining were delayed and then resumed after a period of several months. The second part of the investigation will utilize field measurements of rock-mass properties and instrumentation of actively mined highwalls to obtain data for comparison with the results of the initial investigation. Because the height of highwalls will increase as the more shallow coal is exhausted, these data will also be used to predict the behavior of slopes higher than those presently found in the western Powder River Basin.

Open-File Report↗
USGS1934

Part 1. The coal field from Gallup eastward toward Mount Taylor, with a measured section of pre-Dakota(?) rocks near Navajo Church

The report describes the geology and coal deposits of the southwestern part of the San Juan Basin, N.Mex. The field lies northeast of the town of Gallup, on the Atchison, Topeka & Santa Fe Railway, and is an irregular tract of about 630 square miles in central and west-central McKinley County; it includes the southeast corner of the Navajo Indian Reservation. Settlement is confined to the white families at a few trading posts and the Indian agency at Crown Point and to scattered Navajo Indians. The land forms, drainage, vegetation, and climate are those typical of the highland in the semiarid Southwest. The investigation disclosed complicated relations of the Mancos shale and the Mesaverde formation, of Upper Cretaceous age, and a marked variation in the stratigraphic boundary between them. At the western edge of the field, as in the adjoining Gallup coal district, the Mancos consists of about 725 feet of marine shale almost wholly of Benton (lower Colorado) age. It is overlain by about 1,800 feet of chiefly estuarine and fluviatile deposits that represent the lower part of the Mesaverde formation. In ascending order the Mesaverde here consists of the Gallup sandstone member (which includes local lenses of valuable coal), the Dilco coal member, the Bartlett barren member, the Gibson coal member, and the Allison barren member. Eastward through the field the outcrops extend obliquely across the trend of old shore lines out into the ancient basin of marine deposition, and some of the beds consequently show a progressive lateral change into rocks of littoral and marine types. The Gallup sandstone member is in part replaced by marine shale of the Mancos. The upper part of the Dilco coal member is replaced by the Dalton sandstone member, and still farther east the bottom of the Dalton and the top of the remaining Dilco are replaced by the Mulatto tongue of the Mancos shale. The Bartlett barren member becomes coal-bearing and thus merges with the Gibson. The Gibson coal member is split by the thick Hosta sandstone member, which toward the east and northeast is in turn split by the Satan tongue of the Mancos shale, of upper Niobrara (upper Colorado) age. In general the structure of the rocks is simple, showing a gentle northward dip into the San Juan Basin. At the west edge of the field the rocks dip steeply west in the north end of the prominent ridges known locally as the Hogback. In the eastern part there is a series of pronounced folds, whose crests and troughs retain the gentle basinward dip but whose limbs are steep monoclines that in places are faulted. The coal is of subbituminous rank and of fairly good grade. The coal beds are very irregular and lenticular. Those in the Gallup and Dilco members are of comparatively little importance, reaching a thickness of 4 to 5 feet in only a few places and, in general, being less than 3 feet thick. The coal beds of the Gibson, especially of its lower part, are more numerous and thicker, measurements of 4 to 6 feet thick being fairly common and one bed showing a thickness of 12 feet for more than a mile. No commercial mining has been undertaken in this field, but a few small mines have been used to supply trading posts and the Indian schools at Crown Point and Tohatchi.

New Mexico↗
USGS1980

The heliothermic lake: a direct method of collecting and storing solar energy

Heliothermic lakes contain a sun-heated layer of warm, saline water beneath a surface layer of cooler, less saline water. The two layers are separated by a chemocline, a stratum in which salinity increases progressively with depth. The chemocline, the position of which varies from lake to lake, functions as a heat trap. Most sunlight that penetrates this stratum is transformed into heat, which cannot escape by radiation because water is opaque to infrared light, and which cannot escape by convection because the specific gravity of the dense water below the chemocline is not significantly decreased by the increasing temperature. Heat can escape only by conduction through the chemocline, and water or brine is a very poor conductor. As a result, the temperature within and commonly below the chemocline rises. Under ideal conditions of a clear solution, high isolation, and a suitable salinity distribution, the temperature of the chemocline will increase to the boiling point. The lower part of the chemocline in a shallow (0.8-m) manmade heliothermic lake at Sedom, Israel, for example, reached a temperature of 96°C (205°F) in spite of a brine with poor light transmissibility. About 30 natural heliothermic lakes have been reported. The best known, Lake Ursului, occurs in Transylvania, Romania (latitude, 46°35'N). During four consecutive summers, 1899 to 1902, this lake had temperatures of 60-70°C (140-158°F) at a depth of 1-2 m. Heliothermic conditions have persisted in this lake for at least 28 and probably for more than 77 years. The most unusual, Lake Vanda, Victoria Land, Antarctica (latitude, 77°35'S), has a temperature of 26°C near the base of the chemocline at a depth of 61 despite a mean atmospheric temperature of -20°C. Sunlight penetrates into the chemocline through 5 m of remarkably clear ice. Maintenance of the chemocline is the chief problem preventing commercial use of manmade heliothermic lakes for the collection and storage of solar energy. The most effective means of preserving this stratum from destruction by diffusion and wind mixing may be the use of salts, such as sodium sulfate and sodium borate, whose solubilities are markedly influenced by temperature. The chemoclines of ponds constructed with such salts, in theory, would persist indefinitely and could be of great size.

Open-File Report↗
USGS2025

The 3D Elevation Program—Supporting Rhode Island’s economy

Introduction High-resolution elevation data are critical to applications of landscape modeling and planning, both of which have a significant effect on Rhode Island’s economy. In these and other enterprises, program managers, while aiming to strike a balance between accuracy and cost, strive to obtain the best available elevation data to help them address a range of issues. Programs focused on climate change, environmental management, transportation design and asset management, aviation navigation and safety, riverine ecosystem management, wildlife habitat characterization and management, shellfish aquaculture, and the management and mapping of forests, parks and recreation areas, soils, wetlands, and impervious surfaces are also among the critical applications that meet the State’s management needs and depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features. The 3D Elevation Program (3DEP) is managed by the U.S. Geological Survey (USGS) in partnership with Federal, State, Tribal, U.S. territorial, and local agencies to acquire consistent lidar coverage at quality level 2 or better to meet the many needs of the Nation and Rhode Island. The status of available and in-progress 3DEP baseline lidar data in Rhode Island is shown in figure 1. 3DEP baseline lidar data include quality level 2 or better, 1-meter or better digital elevation models, and lidar point clouds, and must meet the Lidar Base Specification version 1.2 ( https://www.usgs.gov/3dep/lidarspec ) or newer requirements. The National Enhanced Elevation Assessment identified user requirements and conservatively estimated that availability of lidar data would result in at least $178,560 in new benefits annually to the State. The top 10 Rhode Island business uses for 3D elevation data, which are based on the estimated annual conservative benefits of 3DEP, are shown in table 2.

Rhode Island↗
USGS1975

Water availability, Jefferson County, Alabama

The average annual precipitation in Jefferson County is about 53 inches (1,346.2 millimeters) or about 2,820 mgd (million gallons per day), which is equivalent to 124 m 3 /s (cubic meters per second). Part of the rainfall (about 1,130 mgd or 50 m 3 /s) runs off directly into streams, and the remaining 1,690 mgd (74 m 3 /s) replenishes soil moisture to underground reservoirs. Potential sources of ground water in the county are limestone, dolomite, sandstone, and chert aquifers. Wells developed in these aquifers may produce as much as 0.5 mgd (0.022 m 3 /s) per well. In some areas, wells developed in the limestone, dolomite, and chert aquifers may produce more than 0.5 mgd (0.022 m 3 / s) per well. Potential sources of surface water in Jefferson County are the Black Warrior and Cahaba Rivers, Locust Fork, and Valley, Village, Fivemile, Shades, and Turkey Creeks. Average flows at the mouth of these streams or at the point where the stream leaves the county are 4, 070, 250, 1, 230, 360, 100, 120, 100, and 90 mg (178, 11, 54, 16, 4.4, 5. 3, 4. 4, and 3.9 m 3 /s), respectively. Low flows (7-day Q 2 ) are generally in the range of 10 to 100 mgd (0. 44 to 4.4 m 3 /s). Most streams, however, are affected in some way by urbanization. These effects must be considered and better defined before extensive use of streamflow is made. Water from the limestone and dolomite aquifers generally is moderately hard to very hard, contains less than 0.3 mg/1 (milligrams per liter) iron, and has 3 median value of 150 mg/1 dissolved solids. Water from the sandstone aquifer generally is soft to moderately hard, contains iron in excess of 0.3 mg/1, and has a median value of 210 mg/1 dissolved solids. The concentrations of mineral constituents of surface water generally become progressively greater in the downstream direction. The increase in concentration of mineral constituents is attributed to inflow of municipal and industrial waste in the downstream reaches of the stream. This waste disposal has degraded the quality of water in Shades, Valley, Village, and Fivemile Creeks, and Locust Fork. The average water use in Jefferson County was estimated to be about 200 mgd (8.8 m 3 /s) in 1970. The major sources of this supply are Lewis Smith Lake, Inland Lake, and Lake Purdy. These three sources supply water for about 75 percent of Jefferson County's population or 66 percent of the water used.

Alabama↗
USGS1979

Hydrologic data for urban studies in the Fort Worth, Texas, metropolitan area, 1977

Hydrologic investigations of urban areas in Texas were begun by the U.S. Geological Survey in 1954. These investigations are now in progress in several major metropolitan areas including Austin, Dallas, Dallas County, Fort Worth, Houston, and San Antonio. In October 1968, the Geological Survey, in cooperation with the city of Fort Worth, began a program of hydrologic investigations on several small streams in Fort Worth. The investigations are designed to evaluate factors affecting floods on small streams in the metropolitan area. Studies of additional streams were added to the program in October 1969. In October 1976, a reduction in the scope of data collection was made, and the U.S. Army Corps of Engineers, Fort Worth District, assumed financing of the data collection.

Texas↗
USGS2022

Seasonal and long-term clarity trend assessment of Lake Tahoe, California–Nevada

The clarity of Lake Tahoe, observed using a Secchi disk on a regular basis since the late 1960s, continues to be a sentinel metric of lake health. Water clarity is influenced by physical and biological processes and has declined in the five decades of monitoring, revealing differences between summer (June–September) and winter (December–March). This document summarizes key findings of a study of Lake Tahoe water clarity, including long-term variability and the relative importance of several influencing variables and processes. This study, prepared in cooperation with the Nevada Division of Environmental Protection, focused on (1) an apparent divergence in clarity trends between summer and winter periods, (2) observed changes in in-lake physical and ecological variables that may influence or control seasonal and annual clarity trends, and (3) five research hypotheses regarding lake clarity that were developed by Lake Tahoe management agencies. Previously collected data were used to complete this study. Trend analysis confirmed that winter clarity stabilized (that is, there is no longer a statistically significant trend up or down) during the last 20 years. Evaluation of clarity for selected months in the 50-year Secchi disk clarity dataset showed that only two summer months, July and August, had statistically significant decreases in clarity from 2000–19. Different subsets of available data were analyzed to reveal the presence or absences of trends for each season, decade, and month. Five hypotheses related to lake clarity were part of the study described by this report. Hypothesis 1 stated that clarity is controlled predominantly by the distribution and volumetric density of fine particles in suspension. This hypothesis was studied using available data describing in-lake fine (0–20 micrometers) particles from 2008–19. Water clarity was negatively correlated with in-lake particle abundance, with particles in the 1.0-4.6 μm range having the greatest effect, consistent with light-scattering theory. Estimated abundances of diatoms of the genus Cyclotella also were found to be negatively correlated with clarity. Data limitations precluded a complete investigation of hypothesis 2, which stated that the observed improvements in winter water clarity are a response to decreasing fine suspended-sediment concentrations in the lake resulting from load reductions from upland sources in and near urbanized areas. Data describing fine-sediment loading from urban areas to the lake were only available since 2014, and only once or twice per month. A slight, statistically significant, negative correlation was identified between urban fine-particle loading and monthly lake clarity with a 4-month lag. Particle abundance in monitored streams is highly correlated with simultaneous particle abundance in the lake. Hypothesis 3 stated that changing hydrodynamic conditions in the lake are increasing thermal stability and resistance to mixing. Trend analyses performed on stability index and buoyancy frequency time series computed from long-term observations of lake temperatures support the hypothesis that hydrodynamic conditions have evolved since 1969 to increase the lake’s resistance to mixing. The date of maximum mixing in winter has become progressively earlier in the year. Lake density stratification, defined using the stability index, is commencing earlier in the year and extending a month longer than in the early years of the monitoring program. Hypothesis 4 stated that the trend of decreasing summer clarity is a result of earlier, prolonged, and more intense stratification. Statistically significant correlations were found between summer clarity and (1) date of onset of stratification, (2) duration of stratification, and (3) buoyancy frequency. Hypothesis 5 stated that ecological (food web) interactions are causing changes in the trends of seasonal or annual clarity; data supporting hypothesis 5 were limited to examples from other systems and to intermittent monitoring of Lake Tahoe and Emerald Bay. The resulting narrative assessment was motivated by a 6-year study of Mysis shrimp disappearance and return in Emerald Bay. The available data and a large body of published literature are consistent with the inference that Mysis shrimp-induced food web changes are causing changes in the trends of seasonal or annual clarity. This food-web study focused on the relations between introduced Mysis shrimp, the native cladocerans ( Daphnia and Bosmina ) that were largely eliminated following Mysis introduction, and the effect on fine particles within the lake. The records of Mysis and other zooplankton data for Lake Tahoe are episodic and have large gaps. Consequently, statistical analyses could not be conducted to compare zooplankton data with other variables. The long-term record, however, indicates that the key effect was a change to the phytoplankton assemblage, where larger diatoms disappeared, likely due to Mysis grazing, only to be replaced by Cyclotella that are an order-of-magnitude smaller and have increased the abundance and volumetric density of total fine particles in suspension (biotic and abiotic).

California↗
USGS2019

Earthquake arrival association with backprojection and graph theory

The association of seismic‐wave arrivals with causative earthquakes becomes progressively more challenging as arrival detection methods become more sensitive, and particularly when earthquake rates are high. For instance, seismic waves arriving across a monitoring network from several sources may overlap in time, false arrivals may be detected, and some arrivals may be of unknown phase (e.g., P or S waves). We propose an automated method to associate arrivals with earthquake sources and obtain source locations applicable to such situations. To do so, we use a pattern detection metric based on the principle of backprojection to reveal candidate sources followed by graph‐theory‐based clustering and an integer linear optimization routine to associate arrivals with the minimum number of sources necessary to explain the data. This method solves for all sources and phase assignments simultaneously, rather than in a sequential greedy procedure as is common in other association routines. We demonstrate our method on both synthetic and real data from the Integrated Plate Boundary Observatory Chile seismic network of northern Chile. For the synthetic tests, we report results for cases with varying complexity, including rates of 500 earthquakes/day and 500 false arrivals/station/day, for which we measure true positive detection accuracy of >95% . For the real data, we develop a new catalog between 1 January 2010 and 31 December 2017 containing 817,548 earthquakes, with detection rates on average 279 earthquakes/day and a magnitude‐of‐completion of M∼1.8 ⁠ . A subset of detections are identified as sources related to quarry and industrial site activity, and we also detect thousands of foreshocks and aftershocks of the 1 April 2014 M w 8.2 Iquique earthquake. During the highest rate of aftershock activity, >600 earthquakes/day are detected in the vicinity of the Iquique earthquake rupture zone.

Bulletin of the Seismological Society of America↗
USGS2015

U.S. Geological Survey science for the Wyoming Landscape Conservation Initiative—2014 annual report

This is the seventh report produced by the U.S. Geological Survey (USGS) for the Wyoming Landscape Conservation Initiative (WLCI) to detail annual activities conducted by the USGS for addressing specific management needs identified by WLCI partners. In FY2014, there were 26 projects, including a new one that was completed, two others that were also completed, and several that entered new phases or directions. The 26 projects fall into several categories: (1) synthesizing and analyzing existing data to identify current conditions on the landscape and using the data to develop models for projecting past and future landscape conditions; (2) monitoring indicators of ecosystem conditions and the effectiveness of on-the-ground habitat projects; (3) conducting research to elucidate the mechanisms underlying wildlife and habitat responses to changing land uses; (4) managing and making accessible the large number of databases, maps, and other products being developed; and (5) coordinating efforts among WLCI partners, helping them use USGS-developed decision-support tools, and integrating WLCI outcomes with future habitat enhancement and research projects. The new (completed) project was the development and publication of a public outreach piece for visitors of Fossil Butte National Monument. The final product was a USGS Fact Sheet that capitalized on previously collected elk-monitoring data to interpret the ecology of the Monument’s elk population and the importance of the Monument’s habitats to this highly visible wildlife species. One of the completed projects entailed developing and evaluating a synthetic approach to high-resolution satellite imagery for use in effectiveness monitoring, which culminated in a journal article. The other completed project was a coalescing of two similar tasks under data and information management that pertain to Web application development and the development of outreach and graphic products into a single integrated project that focuses on developing and maintaining/upgrading Web applications and other tools for visualizing, mapping, and using geospatial data. Major accomplishments for FY2014 included several publications, including Part B of an energy resources map that (with Part A) depicts coal, wind, oil, gas, oil shale, uranium, and solar energy production in the WLCI region. Two published works associated with sage-grouse included a Wildlife Monograph on prioritizing species’ habitats across large landscapes, multiple seasons, and novel areas (using sage-grouse in Wyoming as an example), and a USGS Data Series report that includes both the data used in the habitat-prioritization models and the habitat prioritization models developed for sage-grouse. Our Science Team also published a framework for conducting large, collaborative projects that rely on geospatial data, and a paper that describes the efficacy of fusing satellite data collected at various resolutions for measuring and monitoring vegetation changes. These products are all invaluable tools for maximizing the efficiency and effectiveness of managing species of concern, conducting future landscape-scale assessments, and monitoring status and trends of landscape conditions. Other highlights of FY2014 included a renewed effort to gather and analyze wildlife and habitat status and trend data for the WLCI Interagency Monitoring Database (IAMD) to assess long-term trends and cumulative effects associated with land-use and climate changes. Water-monitoring efforts included drilling four new groundwater-monitoring wells in the Green and New Fork River basins near the proposed Normally Pressured Lance Formation energy development, and continued data collection at established water-monitoring sites. Three additional wells were sampled as part of the Wyoming Groundwater Monitoring Network, bringing the total to 19 Network wells sampled in the WLCI region since 2010. Combined, these water-monitoring efforts can help to identify potential changes in water quality or levels that may result from land-use changes. Major terrestrial monitoring accomplishments included processing satellite imagery from 1985−2010 to develop a historical perspective of long-term vegetation changes, which can serve as a basis for monitoring current and future trends in sagebrush steppe. Such data are crucial tools for agencies tasked with sage-grouse management and conservation. The USGS WLCI Science Team also continued monitoring and testing methods for evaluating WLCI habitat treatments designed to promote aspen regeneration and enhance sage-grouse habitat, and to assess how those treatments influence invasive species distributions and ungulate herbivory. Highlights included analyzing field data collected to elucidate the relationships between sage-grouse habitat use and the proximity of energy infrastructure, and using new instruments to measure productivity responses of aspen woodlands to various factors. Numerous FY2014 accomplishments specifically addressed agency needs to manage and conserve Wyoming’s wildlife species of concern. A pygmy rabbit habitat model and Wyoming distribution map were completed to identify factors associated with rabbit habitat occupancy. Previous work on sage-grouse population dynamics was expanded to better understand the factors that drive long-term viability of sage-grouse populations and to develop a tool that helps to identify key factors limiting sage-grouse persistence in Wyoming. Field work and data analyses continued for elucidating the relationships between sagebrush songbird abundance and productivity, the intensity of energy development, and community dynamics of nest predators. For the mule deer study, mixed mountain shrublands important to migrating and wintering mule deer were mapped and delivered to WLCI partners. Additionally, the relationships between energy development and crucial winter habitat for mule deer were evaluated, and a new phase of work was implemented to better understand relationships between plant phenology and mule deer migration movements. Finally, initial analyses of data collected to evaluate fish-community composition in relation to habitat quality indicate that water quality, as measured by concentrations of hydrocarbons, water temperature, and others parameters, has been diminished in subwatersheds with higher levels of energy development. Overall, the outcomes and products of these wildlife studies contribute significantly to the information and tools needed for addressing effects of land-use changes on Wyoming’s species of concern. Finally, capabilities of the WLCI Web site and the USGS ScienceBase infrastructure were maintained and upgraded to help ensure access to and efficient use of all the WLCI data, products, assessment tools, and outreach materials that have been developed. Of particular note is the completion of three Web applications developed for mapping (1) the 1900−2008 progression of oil and gas development;(2) the predicted distributions of Wyoming’s Species of Greatest Conservation Need; and (3) the locations of coal and wind energy production, sage-grouse distribution and core management areas, and alternative routes for transmission lines within the WLCI region. Collectively, these applications tools provide WLCI planners and managers with powerful tools for better understanding the distributions of wildlife species and potential alternatives for energy development.

Wyoming↗
USGS2017

Spectrally monitoring the response of the biocrust moss Syntrichia caninervis to altered precipitation regimes

Climate change is expected to impact drylands worldwide by increasing temperatures and changing precipitation patterns. These effects have known feedbacks to the functional roles of dryland biological soil crust communities (biocrusts), which are expected to undergo significant climate-induced changes in community structure and function. Nevertheless, our ability to monitor the status and physiology of biocrusts with remote sensing is limited due to the heterogeneous nature of dryland landscapes and the desiccation tolerance of biocrusts, which leaves them frequently photosynthetically inactive and difficult to assess. To address this critical limitation, we subjected a dominant biocrust species Syntrichia caninervis to climate-induced stress in the form of small, frequent watering events, and spectrally monitored the dry mosses’ progression towards mortality. We found points of spectral sensitivity responding to experimentally-induced stress in desiccated mosses, indicating that spectral imaging is an effective tool to monitor photosynthetically inactive biocrusts. Comparing the Normalized Difference Vegetation Index (NDVI), the Simple Ratio (SR), and the Normalized Pigment Chlorophyll Index (NPCI), we found NDVI minimally effective at capturing stress in precipitation-stressed dry mosses, while the SR and NPCI were highly effective. Our results suggest the strong potential for utilizing spectroscopy and chlorophyll-derived indices to monitor biocrust ecophysiological status, even when biocrusts are dry, with important implications for improving our understanding of dryland functioning.

Scientific Reports↗