Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Nature”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67Linked to original sources

Natural recharge and localization of fresh ground water in Kuwait

Fresh ground water (200 parts per million total dissolved solids and upwards) occurs in portions of Pleistocene sandstone aquifers beneath basins and wadis in north Kuwait where the mean rainfall is about five inches per year. The fresh water is surrounded and underlain by brackish water (> 4000 ppm TDS). Drilling and testing show that fresh water saturation is restricted to wadis and basin areas; in Rawdatain basin it attains a maximum thickness of about 110 feet and a lateral extent of about seven miles. The fresh ground water represents recharge localized, during infrequent, torrential rain storms, in areas of concentrated runoff where sediments in the vadose zone are moderately permeable and depth to the water table is generally less than a hundred feet. Concentration of runoff appears to be the primary control in the localization of recharge. The fresh water percolates downward to the ground-water reservoir following rare storms, then flows in the direction of hydraulic gradient and gradually becomes brackish. Theoretical delineation of the recharge area and ground-water flow pattern in Rawdatain was confirmed by tritium and C 14 dating of the water. Brackish ground-water conditions prevail from water table downward in areas where rainfall infiltrates essentially where it falls, permeability of sediments in the vadose zone is low, or the water table is several hundred feet below land surface. In these areas, rainfall is retained and lost within the soil zone or becomes mineralized during deep percolation.

Journal of Hydrology↗

Natural groundwater recharge in an upland area of central North Dakota, U.S.A.

The magnitude of groundwater recharge to coal aquifers in a 150-km 2 area in west-central North Dakota was determined using three separate approaches: (1) the net water level rise in water-table wells; (2) calculations of the fluid flux between nested piezometers, using the Darcy equation and measured values of hydraulic conductivity and vertical gradients; and (3) evaluation of the inputs to and outputs from the coal aquifer, using a steady-state control volume approach in which the aquifer was divided into semi-rectangular cells bounded by equipotential lines and flow lines. Measurements of potential gradients and hydraulic conductivity permitted indirect determination of all components of flow into and out of the cell except the recharge input, which was determined by difference. All methods yielded consistent results on the order of 0.04-0.01 m yr. −1 These values, which represent 2–9% of the annual precipitation, are consistent with results of other studies on recharge throughout the prairies of North America. Evaluation of site hydrology and stable-isotope data indicates that recharge is restricted in both time and place. Most recharge occurs in late spring and in the fall following heavy rainfall events. During these seasons the ground is not frozen and vegetation is not transpiring large amounts of water. Some recharge may occur during very heavy localized summer storms, but it is not considered volumetrically significant. Major permanent depressions on the site are a source of significant recharge. In addition, the extensive area of ephemeral standing water bodies that result from snowmelt can produce significant amounts of infiltration over the entire site.

central North Dakota↗

Beach lamination: Nature and origin

A distinctive two-fold sedimentation unit characterizes lamination in the upper swash zone of beaches. Within the unit a fine and/or a heavy mineral rich layer at the base grades upward into a coarser and/or a heavy mineral poor layer at the top. This distinctive type of lamination results from grain segregation within bed flow during wave backwash.

Marine Geology↗

Geochemistry of a naturally occurring massive marine gas hydrate

During Deep Sea Drilling Project (DSDP) Leg 84 a core 1 m long and 6 cm in diameter of massive gas hydrate was unexpectedly recovered at Site 570 in upper slope sediment of the Middle America Trench offshore of Guatemala. This core contained only 5–7% sediment, the remainder being the solid hydrate composed of gas and water. Samples of the gas hydrate were decomposed under controlled conditions in a closed container maintained at 4°C. Gas pressure increased and asymptotically approached the equilibrium decomposition pressure for an ideal methane hydrate, CH 4 .5-3/4H 2 O, of 3930 kPa and approached to this pressure after each time gas was released, until the gas hydrate was completely decomposed. The gas evolved during hydrate decomposition was 99.4% methane, ∼0.2% ethane, and ∼0.4% CO 2 . Hydrocarbons from propane to heptane were also present, but in concentrations of less than 100 p.p.m. The carbon-isotopic composition of methane was −41 to −44 permil(( 0 00 "> 000 ), relative to PDB standard. The observed volumetric methane/water ratio was 64 or 67, which indicates that before it was stored and analyzed, the gas hydrate probably had lost methane. The sample material used in the experiments was likely a mixture of methane hydrate and water ice. Formation of this massive gas hydrate probably involved the following processes: (i) upward migration of gas and its accumulation in a zone where conditions favored the growth of gas hydrates, (ii) continued, unusually rapid biological generation of methane, and (iii) release of gas from water solution as pressure decreased due to sea level lowering and tectonic uplift.

Middle America Trench↗

Interaction of rising frazil with suspended particles: Tank experiments with applications to nature

Widespread occurrence of sediment-laden (turbid) sea ice and high concentrations of diatoms and foraminifers in ice have recently been reported from both polar regions. Many possible mechanisms of particle entrainment into ice have been postulated, among which scavenging by rising frazil ice and nucleation or adhesion of ice onto suspended particles appear to be the most likely ones. No reliable experimental data on the mechanisms, however, are available. Because of the importance of turbid ice for sediment transport, tanks for laboratory-scale experiments were constructed, in which frazil crystals produced at the base were monitored rising through water column laden with various types of particulate matter, including plankton. Observations made in salt water are reported here. Over a distance of 1.5 m, frazil < 1 mm in diameter grew to crystals or flocs several cm in diameter, rising at average velocities of 2 to 3 cm/s. Rise velocities were a function of frazil size, but varied greatly due to interactions of ice particles of different size and velocity and the resulting turbulence. Sand-size particles could be either trapped permanently by rising frazil, or were temporarily supported and again released. With live plankton, a several-fold enrichment of ice occurred, suggesting that their irregular shapes or appendages were caught by ice flocs. Diatom- and foram tests were also relatively effectively trapped. The concentration of silt- and clay-size terrigenous detritus in frazil tended to increase relative to the water. We found no preferential sorting by ice in this size range. Various kinds of evidence showed that ice does not nucleate onto foreign particles, and has no adhesive properties. Foreign material resided in the interstices of crystal aggregates, and particles denser than water could be released by agitation, suggesting that scavenging is a mechanical process. With rising frazil, the settling of particulate matter therefore is either retarded or reversed, resulting in a net upward sediment flux and a sediment-laden ice cover from this process of suspension freezing.

Cold Regions Science and Technology↗

The geochemical nature of the Archean Ancient Gneiss Complex and Granodiorite Suite, Swaziland: A preliminary study

The Ancient Gneiss Complex (AGC) of Swaziland, an Archean gray gneiss complex, lies southeast and south of the Barberton greenstone belt and includes the most structurally complex and highly metamorphosed portions of the eastern Kaapvaal craton. The AGC is not precisely dated but apparently is older than 3.4 Ga. The AGC consists of three major units: (a) a bimodal suite of closely interlayered siliceous, low-K gneisses and metabasalt; (b) homogeneous tonalite gneiss; and (c) interlayered siliceous microcline gneiss, metabasalt, and minor metasedimentary rocks - termed the metamorphite suite. A geologically younger gabbro-diorite-tonalite-trondhjemite suite, the Granodiorite Suite, is spatially associated with the AGC and intrusive into it. The bimodal suite consists largely of two types of low-K siliceous gneiss: one has SiO 2 < 75%, Al 2 O 3 > 14%, low Rb/Sr ratios, and depleted heavy rare earth elements (REE's); the other has SiO 2 > 75%, Al 2 O 3 < 13%, high Rb/Sr ratios, and relatively abundant REE's except for negative Eu anomalies. The interlayered metabasalt ranges from komatiitic to tholeiitic compositions. Lenses of quartz monzonitic gneiss of K 2 O/Na 2 O close to 1 form a minor part of the bimodal suite. Tonalitic to trondhjemitic migmatite locally is abundant and has major-element abundances similar to those of non-migmatitic varieties. The siliceous gneisses of the metamorphic suite show low Al 2 O, K 2 O/Na 2 O ratios of about 1, high Rb/Sr ratios, moderate REE abundances and negative Eu anomalies. K/Rb ratios of siliceous gneisses of the bimodal suite are very low (∼130); of the tonalitic gneiss, low (∼225); of the siliceous gneiss of the metamorphite suite, moderate (∼300); and of the Granodiorite Suite, high (∼400). Rocks of the AGC differ geochemically in several ways from the siliceous volcanic and hypabyssal rocks of the Upper Onverwacht Group and from the diapirs of tonalite and trondhjemite that intrude the Swaziland Group.

Precambrian Research↗

The nature of Archean terrane boundaries: An example from the northern Wyoming Province

The Archean northern Wyoming Province can be subdivided into two geologically distinct terranes, the Beartooth-Bighorn magmatic terrane (BBMT) and the Montana metasedimentary terrane (MMT). The BBMT is characterized by voluminous Late Archean (2.90-2.74 Ga) magmatic rocks (primarily tonalite, trondhjemite, and granite); metasedimentary rocks are preserved only as small, rare enclaves in this magmatic terrane. The magmatic rocks typically have geochemical and isotopic signatures that suggest petrogenesis in a continental magmatic arc environment. The MMT, as exposed in the northern Gallatin and Madison Ranges, is dominated by Middle Archean trondhjemitic gneisses (3.2-3.0 Ga); metasedimentary rocks, however, are significantly more abundant than in the BBMT. Each terrane has experienced a separate and distinct geologic history since at least 3.6 Ga ago based on differences in metamorphic and structural styles, composition of magmatic and metasupracrustal rocks, and isotopic ages; consequently, these may be described as discrete terranes in the Cordilleran sense. Nonetheless, highly radiogenic and distinctive Pb-Pb isotopic signatures in rocks of all ages in both terranes indicate that the two terranes share a significant aspect of their history. This suggests that these two Early to Middle Archean crustal blocks, that initially evolved as part of a larger crustal province, experienced different geologic histories from at least 3.6 Ga until their juxtaposition in the Late Archean (between 2.75 to 2.55 Ga ago). Consequently, the boundary between the BBMT and MMT appears to separate terranes that are not likely to be exotic in the sense of their Phanerozoic counterparts. Other Archean provinces do appear to contain crustal blocks with different isotopic signatures (e.g. West Greenland, India, South Africa). The use of the term exotic, therefore, must be cautious in situations where geographic indicators such as paleontologic and/or paleomagnetic data are not available. In these cases, isotopic signatures are one of the most useful features for assessing overall genetic relations amongst geologically distinct terranes.

Idaho, Montana, Wyoming↗

The nature of carbon dioxide waters in Snaefellsnes, western Iceland

Over 20 occurrences of thermal and non-thermal waters rich in carbon dioxide are known in the Snaefellsnes Peninsula of western Iceland. On the basis of the thermal, chemical and isotopic characteristics of these waters, and hydrological considerations, it is concluded that they represent meteoric waters which have seeped to variable depths into the bedrock. Ascending carbon dioxide gas originating from intrusions or the mantle mixes with the meteoric waters to produce carbon dioxide waters: at considerable depth in the case of the thermal carbon dioxide waters but close to the surface in the case of cold carbon dioxide waters. The occurrence of carbon dioxide waters cannot be regarded as evidence for underground geothermal reservoirs.

Geothermics↗

Surface chemical effects on colloid stability and transport through natural porous media

Surface chemical effects on colloidal stability and transport through porous media were investigated using laboratory column techniques. Approximately 100 nm diameter, spherical, iron oxide particles were synthesized as the mobile colloidal phase. The column packing material was retrieved from a sand and gravel aquifer on Cape Cod, MA. Previous studies have indicated enhanced stability and transport of iron oxide particles due to specific adsorption of some inorganic anions on the iron oxide surface. This phenomenon was further evaluated with an anionic surfactant, sodium dodecyl sulfate. Surfactants constitute a significant mass of the contaminant loading at the Cape Cod site and their presence may contribute to colloidal transport as a significant transport mechanism at the site. Other studies at the site have previously demonstrated the occurrence of this transport mechanism for iron phosphate particles. Photon correlation spectroscopy, micro-electrophoretic mobility, and scanning electron microscopy were used to evaluate particle stability, mobility and size. Adsorption of negatively charged organic and inorganic species onto the surface of the iron oxide particles was shown to significantly enhance particle stability and transport through alterations of the electrokinetic properties of the particle surface. Particle breakthrough generally occurred simultaneously with tritiated water, a conservative tracer. The extent of particle breakthrough was primarily dependent upon colloidal stability and surface charge.

Massachusetts↗

Stability of low levels of perchlorate in drinking water and natural water samples

Perchlorate ion (ClO4-) is an environmental contaminant of growing concern due to its potential human health effects, impact on aquatic and land animals, and widespread occurrence throughout the United States. The determination of perchlorate cannot normally be carried out in the field. As such, water samples for perchlorate analysis are often shipped to a central laboratory, where they may be stored for a significant period before analysis. The stability of perchlorate ion in various types of commonly encountered water samples has not been generally examined-the effect of such storage is thus not known. In the present study, the long-term stability of perchlorate ion in deionized water, tap water, ground water, and surface water was examined. Sample sets containing approximately 1000, 100, 1.0, and 0.5 ??g l-1 perchlorate ion in deionized water and also in local tap water were formulated. These samples were analyzed by ion chromatography for perchlorate ion concentration against freshly prepared standards every 24 h for the first 7 days, biweekly for the next 4 weeks, and periodically after that for a total of 400 or 610 days for the two lowest concentrations and a total of 428 or 638 days for the high concentrations. Ground and surface water samples containing perchlorate were collected, held and analyzed for perchlorate concentration periodically over at least 360 days. All samples except for the surface water samples were found to be stable for the duration of the study, allowing for holding times of at least 300 days for ground water samples and at least 90 days for surface water samples. ?? 2006 Elsevier B.V. All rights reserved.

Analytica Chimica Acta↗

Elevated naturally occurring arsenic in a semiarid oxidizing system, Southern High Plains aquifer, Texas, USA

High groundwater As concentrations in oxidizing systems are generally associated with As adsorption onto hydrous metal (Al, Fe or Mn) oxides and mobilization with increased pH. The objective of this study was to evaluate the distribution, sources and mobilization mechanisms of As in the Southern High Plains (SHP) aquifer, Texas, relative to those in other semiarid, oxidizing systems. Elevated groundwater As levels are widespread in the southern part of the SHP (SHP-S) aquifer, with 47% of wells exceeding the current EPA maximum contaminant level (MCL) of 10 μg/L (range 0.3–164 μg/L), whereas As levels are much lower in the north (SHP-N: 9% ⩾ As MCL of 10 μg/L; range 0.2–43 μg/L). The sharp contrast in As levels between the north and south coincides with a change in total dissolved solids (TDS) from 395 mg/L (median north) to 885 mg/L (median south). Arsenic is present as arsenate (As V) in this oxidizing system and is correlated with groundwater TDS (Spearman’s ρ = 0.57). The most likely current source of As is sorbed As onto hydrous metal oxides based on correlations between As and other oxyanion-forming elements (V, ρ = 0.88; Se, ρ = 0.54; B, ρ = 0.51 and Mo, ρ = 0.46). This source is similar to that in other oxidizing systems and constitutes a secondary source; the most likely primary source being volcanic ashes in the SHP aquifer or original source rocks in the Rockies, based on co-occurrence of As and F ( ρ = 0.56), oxyanion-forming elements and SiO 2 ( ρ = 0.41), which are found in volcanic ashes. High groundwater As concentrations in some semiarid oxidizing systems are related to high evaporation. Although correlation of As with TDS in the SHP aquifer may suggest evaporative concentration, unenriched stable isotopes (δ 2 H: −65 to −27; δ 18 O: −9.1 to −4.2) in the SHP aquifer do not support evaporation. High TDS in the SHP aquifer is most likely related to upward movement of saline water from the underlying Triassic Dockum aquifer. Mobilization of As in other semiarid oxidizing systems is caused by increased pH; however, pH in the SHP aquifer is near neutral (10–90 percentiles, 7.0–7.6). Although many processes, such as competitive desorption with SiO 2 , VO 4 , or PO 4 , could be responsible for local mobilization of As in the SHP aquifer, the most plausible explanation for the regional As distribution and correlation with TDS is the counterion effect caused by a change from Ca- to Na-rich, water as shown by the high correlation between As and Na/(Ca) 0.5 ratios ( ρ = 0.57). This change in chemistry is related to mixing with saline water that moves upward from the underlying Dockum aquifer. This counterion effect may mobilize other anions and oxyanion-forming elements that are correlated with As (F, V, Se, B, Mo and SiO 2 ). Competition among the oxyanions for sorption sites may enhance As mobilization. The SHP case study has similar As sources to those of other semiarid, oxidizing systems (original volcanic ash source followed by sorption onto hydrous metal oxides) but contrasts with these systems by showing lack of evaporative concentration and pH mobilization of As but counterion mobilization of As instead in the SHP-S aquifer.

Texas↗

Contaminants from Cretaceous black shale: I. Natural weathering processes controlling contaminant cycling in Mancos Shale, southwestern United States, with emphasis on salinity and selenium

Soils derived from black shale can accumulate high concentrations of elements of environmental concern, especially in regions with semiarid to arid climates. One such region is the Colorado River basin in the southwestern United States where contaminants pose a threat to agriculture, municipal water supplies, endangered aquatic species, and water-quality commitments to Mexico. Exposures of Cretaceous Mancos Shale (MS) in the upper basin are a major contributor of salinity and selenium in the Colorado River. Here, we examine the roles of geology, climate, and alluviation on contaminant cycling (emphasis on salinity and Se) during weathering of MS in a Colorado River tributary watershed. Stage I (incipient weathering) began perhaps as long ago as 20 ka when lowering of groundwater resulted in oxidation of pyrite and organic matter. This process formed gypsum and soluble organic matter that persist in the unsaturated, weathered shale today. Enrichment of Se observed in laterally persistent ferric oxide layers likely is due to selenite adsorption onto the oxides that formed during fluctuating redox conditions at the water table. Stage II weathering (pedogenesis) is marked by a significant decrease in bulk density and increase in porosity as shale disaggregates to soil. Rainfall dissolves calcite and thenardite (Na 2 SO 4 ) at the surface, infiltrates to about 1 m, and precipitates gypsum during evaporation. Gypsum formation (estimated 390 kg m −2 ) enriches soil moisture in Na and residual SO 4 . Transpiration of this moisture to the surface or exposure of subsurface soil (slumping) produces more thenardite. Most Se remains in the soil as selenite adsorbed to ferric oxides, however, some oxidizes to selenate and, during wetter conditions is transported with soil moisture to depths below 3 m. Coupled with little rainfall, relatively insoluble gypsum, and the translocation of soluble Se downward, MS landscapes will be a significant nonpoint source of salinity and Se to the Colorado River well into the future. Other trace elements weathering from MS that are often of environmental concern include U and Mo, which mimic Se in their behavior; As, Co, Cr, Cu, Ni, and Pb, which show little redistribution; and Cd, Sb, V, and Zn, which accumulate in Stage I shale, but are lost to varying degrees from upper soil intervals. None of these trace elements have been reported previously as contaminants in the study area.

Colorado↗

Cinnamon gulch revisited: Another look at separating natural and mining-impacted contributions to instream metal load

Baseline, premining data for streams draining abandoned mine lands is virtually non existent, and indirect methods for estimating premining conditions are needed to establish realistic, cost effective cleanup goals. One such indirect method is the proximal analog approach, in which premining conditions are estimated using data from nearby mineralized areas that are unaffected by mining. In this paper, we combine the proximal analog approach with a quantitative mass balance framework using data from a spatially-detailed synoptic sampling campaign. The combined approach is applied to Cinnamon Gulch, a headwater stream with numerous draining adits. Synoptic sampling results indicate that three of the top five metal sources are affected by mining activities, and stream segments draining these sources account for a large percentage of overall metal loading within the study reach. These initial calculations overestimate the effects of mining, as the affected stream segments were likely acidic and metal rich prior to mining. Premining loads and concentrations were therefore determined through a replacement approach in which the chemistry of each mining-affected stream segment is revised based on proximal analog concentrations. The revised loading profiles indicate that 15–17% of the Al, Cd, Cu, Mn, Ni, and Zn loads are attributable to mining, whereas the mining contribution for Pb is 40%. Premining concentrations of Al, Cd, Cu, Mn, and Zn are estimated to be in excess of aquatic life standards over the length of the study reach.

Colorado↗