SEARCH · Geology Reports

Results for “Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67Linked to original sources

USGS1994

Deglaciation, lake levels, and meltwater discharge in the Lake Michigan basin

The deglacial history of the Lake Michigan basin, including discharge and routing of meltwater, is complex because of the interaction among (1) glacial retreats and re-advances in the basin (2) the timing of occupation and the isostatic adjustment of lake outlets and (3) the depositional and erosional processes that left evidence of past lake levels. In the southern part of the basin, a restricted area little affected by differential isostasy, new studies of onshore and offshore areas allow refinement of a lake-level history that has evolved over 100 years. Important new data include the recognition of two periods of influx of meltwater from Lake Agassiz into the basin and details of the highstands gleaned from sedimentological evidence. Major disagreements still persist concerning the exact timing and lake-level changes associated with the Algonquin phase, approximately 11,000 BP. A wide variety of independent data suggests that the Lake Michigan Lobe was thin, unstable, and subject to rapid advances and retreats. Consequently, lake-level changes were commonly abrupt and stable shorelines were short-lived. The long-held beliefs that the southern part of the basin was stable and separated from deformed northern areas by a hinge-line discontinuity are becoming difficult to maintain. Numerical modeling of the ice-earth system and empirical modeling of shoreline deformation are both consistent with observed shoreline tilting in the north and with the amount and pattern of modern deformation shown by lake-level gauges. New studies of subaerial lacustrine features suggest the presence of deformed shorelines higher than those originally ascribed to the supposed horizontal Glenwood level. Finally, the Lake Michigan region as a whole appears to behave in a similar manner to other areas, both local (other Great Lakes) and regional (U.S. east coast), that have experienced major isostatic changes. Detailed sedimentological and dating studies of field sites and additional development of geophysical models offer hope for reconciling the field data with our understanding of earth rheology. ?? 1995.

Lake Michigan Basin↗

USGS1995

Volcanic and structural evolution of Taupo Volcanic Zone, New Zealand: A review

The Taupo Volcanic Zone (TVZ) in the central North Island is the main focus of young volcanism in New Zealand. Andesitic activity started at c. 2 Ma, joined by voluminous rhyolitic (plus minor basaltic and dacitic) activity from c. 1.6 Ma. The TVZ is c. 300 km long (200 km on land) and up to 60 km wide, as defined by vent positions and caldera structural boundaries. The total volume of TVZ volcanic deposits is uncertain because a sub-volcanic basement has not been identified, but present data suggest bulk volumes of 15–20,000 km 3 , and that faulted metasediments form most of the immediate subvolcanic basement. Rhyolite (≥15,000 km 3 bulk volume, typically 70–77% SiO 2 ) is the dominant magma erupted in the TVZ (mostly as calderaforming ignimbrite eruptions), andesite is an order of magnitude less abundant, and basalt and dacite are minor in volume (< 100 km 3 each). The history of the TVZ is here divided into ‘old TVZ’ from 2.0 Ma to 0.34 Ma, and ‘young TVZ’ from 0.34 Ma onwards, separated by the Whakamaru eruptions, which obscured much of the evidence for older activity within the zone. The TVZ shows a pronounced segmentation into northeastern and southwestern andesite-dominated extremities with composite cones and no calderas, and a central 125-km-long rhyolite-dominated segment. Eight rhyolitic caldera centres have so far been identified in the central segment, of which two (Mangakino and Kapenga) are composite features, and more centres will probably be delineated as further data accumulate. These centres account for 34 inferred caldera-forming ignimbrite eruptions, in the c. 1.6-Ma lifetime of the central TVZ. The modern central TVZ is the most frequently active and productive silicic volcanic system on Earth, erupting rhyolite at c. 0.28 m 3 s −1 , and available information suggests this has been so for at least the past 0.34 Ma. The rhyolites show no major compositional changes with time, though the extent of magma chamber zonation may have changed with the incoming of rifting and crustal extension in the past c. 0.9 Ma. Within the central TVZ, non-rhyolitic compositions have been erupted apparently irregularly in time and space; in particular there is no evidence for a geographic separation of basalts from andesites. Between 0.9 and 0.34 Ma, a major episode of uplift affected areas around the TVZ, while at the same time the main focus of activity may have migrated eastwards within the TVZ accompanying rifting along the axis of the zone. The modern TVZ is rifting at rates between 7 and 18 mm a −1 and restoration of the thin (15km) ‘crust’ ( V p ≤ 6.1 km s −1 ) beneath the central TVZ to its pre-rifting thickness (25 km) implies that rifting at such rates may have begun only at c. 0.9 Ma. The TVZ is a rifted arc, but its longitudinally segmented nature, high thermal flux and voluminous rhyolitic volcanism make it unique on Earth.

Taupo Volcanic Field↗

USGS1990

Global data collection and the surveillance of active volcanoes

Data relay systems on existing earth-orbiting satellites provide an inexpensive way to collect environmental data from numerous remote sites around the world. This technology could be used effectively for fundamental monitoring of most of the world's active volcanoes. Such global monitoring would focus attention on the most dangerous volcanoes that are likely to significantly impact the geosphere and the biosphere.

Palaeogeography, Palaeoclimatology, Palaeoecology↗

USGS2007

The geochemistry of pesticides

The mid-1970s marked a major turning point in human history, for it was at that moment that the ability of the Earth’s ecosystems to absorb most of the biological impacts of human activities appears to have been exceeded by the magnitude of those impacts. This conclusion is based partly upon estimates of the rate of carbon dioxide emission during the combustion of fossil fuels, relative to the rate of its uptake by terrestrial ecosystems ( Loh, 2002 ). A very different threshold, however, had already been crossed several decades earlier with the birth of the modern chemical industry, which produced novel substances for which no such natural assimilative capacity existed. Among these new chemical compounds, none has posed a greater challenge to the planet’s ecosystems than synthetic pesticides, compounds that have been intentionally released into the hydrologic system in vast quantities—several hundred million pounds of active ingredient (a.i.) per year in the United States alone ( Donaldson et al. , 2002 )—for many decades. To gauge the extent to which we are currently able to assess the environmental implications of this new development in the Earth’s history, this chapter presents an overview of current understanding regarding the sources, transport, fate, and biological effects of pesticides, their transformation products, and selected adjuvants in the hydrologic system. (Adjuvants are the so-called inert ingredients included in commercial pesticide formulations to enhance the effectiveness of the active ingredients.)

Book chapter↗

USGS2021

Dating by cosmogenic nuclides

Since the 1990s, cosmogenic nuclides have revolutionized the study of Earth surface processes, particularly the understanding of rates and dates. These nuclides, including 3 He, 10 Be, 14 C, 21 Ne, 26 Al, and 36 Cl, enable dating of landforms and the measurement of erosion rates both at the scale of drainage basins and at specific locations on Earth's surface. Cosmogenic nuclides are produced at low rates (several to hundreds of atoms per gram per year) by the interaction of cosmic rays with elements both in the atmosphere and in surficial materials, including in rock and soil. Measuring nuclide concentrations requires elemental separation from source geologic material followed by counting of atoms using sensitive accelerator mass spectrometers. Because nuclide production rates have been quantified, the measured concentration of these nuclides can be interpreted as a near-surface residence time. Here, we review the systematics of commonly used cosmogenic nuclides, describe how they are extracted and measured, and then present case studies focusing on the most commonly measured cosmogenic nuclide, 10 Be. We present common applications such as dating surface features, including moraines and outcrops shaped by glaciation, the use of cosmogenic nuclides for inferring tectonic and erosion processes in drainage basins, and the use of these nuclides to trace sediment sources in drainage basins. When multiple nuclides are measured in one sample, they can be used to model burial and exposure histories in stratigraphic sections. We conclude by exploring what the future might bring in terms of measurements and applications.

Book chapter↗

USGS2018

Extreme-event geoelectric hazard maps: Chapter 9

Maps of geoelectric amplitude covering about half the continental United States are presented that will be exceeded, on average, once per century in response to an extreme-intensity geomagnetic disturbance. These maps are constructed using an empirical parameterization of induction: convolving latitude-dependent statistical maps of extreme-value geomagnetic disturbances, obtained from decades of 1-minute magnetic observatory data, with local estimates of Earth-surface impedance obtained at discrete geographic sites from magnetotelluric surveys. Geoelectric amplitudes are estimated for geomagnetic waveforms having a 240-s (and 1200-s) sinusoidal period and amplitudes over 10 min (1 h) that exceed a once-per-century threshold. As a result of the combination of geographic differences in geomagnetic variation and Earth-surface impedance, once-per-century geoelectric amplitudes span more than two orders of magnitude and are a highly granular function of location. Specifically for north-south 240-s induction, once-per-century geoelectric amplitudes across large parts of the United States have a median value of 0.34 V/km; for east-west variation, they have a median value of 0.23 V/km. In Northern Minnesota, amplitudes exceed 14.00 V/km for north-south geomagnetic variation (23.34 V/km for east-west variation), while just over 100 km away, amplitudes are only 0.08 V/km (0.02 V/km). At some sites in the northern-central United States, once-per-century geoelectric amplitudes exceed the 2 V/km realized in Québec during the March 1989 storm.

Book chapter↗

USGS2015

11.12 – Tools and techniques: gravitational method

The gravitational method is used to investigate density variations within the subsurface at depths of several meters to tens of meters, as in depth-to-bedrock investigations, or at depths of several kilometers, as in sedimentary basin thickness investigations. This chapter covers fundamental relations, densities of Earth materials, instruments, field procedures, data reduction, filtering, forward modeling, inversion, and field examples. The focus is on near-surface investigations as distinct from the solid Earth studies found elsewhere in this treatise. The gravitational method is often used in conjunction with other geophysical methods, such as the magnetic method or the seismic method, which target similar physical properties at similar depths.

Book chapter↗

USGS2009

Vadose water

Vadose water is subsurface water between the land surface and the saturated zone below the water table. The vadose (or unsaturated) zone includes soil water, which is immediately available to the biosphere. It acts as a controlling agent in the transmission of water and other substances between various components of the earth system: aquifers, land surface, bodies of water, atmosphere, and so on. As an accessible body of material near the earth's surface, the vadose zone is a focus of much human activity, including agriculture, mining, construction, and waste disposal. Thus, it is affected by anthropogenic modifications of its chemical and physical components. Modern hydrology must consider interactions not only among the natural constituents, but also with a wide variety of contaminants, including pesticides, fertilizers, irrigation wastewater, sewage, toxic chemicals, radioactive substances, bacteria, mine wastes, and organic liquids.

Book chapter↗

USGS2007

Crust and lithospheric structure – Global crustal structure

The Earth’s crust has played an important role in all aspects of this planet’s evolution. This chapter presents a review of our current understanding of the physical properties of the crust on a global basis. This understanding comes from extensive seismic measurements using many techniques, as well as nonseismic geophysics, including gravity, magnetic, geoelectric, and heat flow measurements. Seismic measurements include those that employ active (man-made) sources and those that use passive (naturally occurring) sources. Deep seismic reflection profiles provide a seismic image of the crust in twodimensions with a high (50–100m) resolution. Local earthquake tomography can provide three-dimensional (3-D) seismic images at moderate (500–1000m) resolution and higher, depending on the number and spacing of seismographs. Nonseismic methods provide estimates of crustal density, magnetic properties, conductivity and geotherms (temperature vs depth). The crust in deep ocean basins is 6–7km thick and has a relatively uniform seismic velocity structure, but there are numerous oceanic regions with anomalous crustal structure, including mid-ocean ridges, trenches, volcanic islands, and oceanic plateaux. Ocean–continent passive margins are also highly variable in structure, and may be classified as volcanic versus nonvolcanic margins. Continental crust ranges in thickness from 16 to 80km, and has a highly variable seismic velocity and density structure. The proportions of continental crust, by area, are 69% shield and platform (cratons), 15% old and young orogens, 9% extended (stretched) crust, 6 % magmatic arc, and 1% rifts. The weighted mean continental crustal thickness and average crustal velocity are 41km (SD 6.2km) and 6.45kms−1 (SD 0.21kms−1), respectively. A global geographic distribution of seismic data has made it possible to create global crustal models with cell sizes as small as 2°×2°. These models provide a complete description of seismic velocities and density within the crust and uppermost mantle, including, where present, ice, water, and sedimentary layers and the crystalline crust (parameterized in three layers, upper, middle and lower crust), and sub-Moho properties. The crust is the most intensely studied region of the Earth’s interior and consequently is the best understood in terms of its structure, composition, and evolution. © 2007 Elsevier B.V. All rights reserved.

Book chapter↗

USGS2013

The geologic records of dust in the Quaternary

Study of geologic records of dust composition, sources and deposition rates is important for understanding the role of dust in the overall planetary radiation balance, fertilization of organisms in the world’s oceans, nutrient additions to the terrestrial biosphere and soils, and for paleoclimatic reconstructions. Both glacial and non-glacial processes produce fine-grained particles that can be transported by the wind. Geologic records of dust flux occur in a number of depositional archives for sediments: (1) loess deposits; (2) lake sediments; (3) soils; (4) deep-ocean basins; and (5) ice sheets and smaller glaciers. These archives have several characteristics that make them highly suitable for understanding the dynamics of dust entrainment, transport, and deposition. First, they are often distributed over wide geographic areas, which permits reconstruction of spatial variation of dust flux. Second, a number of dating methods can be applied to sediment archives, which allows identification of specific periods of greater or lesser dust flux. Third, aeolian sediment particle size and composition can be determined so that dust source areas can be ascertained and dust transport pathways can be reconstructed. Over much of the Earth’s surface, dust deposition rates were greater during the last glacial period than during the present interglacial period. A dustier Earth during glacial periods is likely due to increased source areas, greater aridity, less vegetation, lower soil moisture, possibly stronger winds, a decreased intensity of the hydrologic cycle, and greater production of dust-sized particles from expanded ice sheets and glaciers.

Aeolian Research↗

USGS2020

Keeping up with the times: Mapping range-wide habitat suitability for endangered species in a changing environment

Biologists and policy-makers have the difficult task of allocating limited resources to habitat conservation and management for endangered species in the face of changing environmental conditions. Satellite remote sensing can inform conservation because it is an efficient means to obtain environmental data over broad spatial and temporal extents. Yet, the challenges of accessing, processing, and analyzing remote sensing data hinder wider application of these techniques in conservation planning. We used Landsat data and hierarchical statistical models to link satellite-derived habitat measurements with abundance of endangered Yuma Ridgway's rails ( Rallus obsoletus yumanensis ) within the Lower Colorado River Basin and Salton Sink, USA. We addressed many of the challenges facing the application of remote sensing techniques by using the web-based, freely-available Google Earth Engine to process Landsat datasets, apply habitat models, and generate maps to predict habitat suitability at a fine spatial grain (30 m) across the range of the species. These maps are shareable, interactive, and easy to update annually as habitat conditions change using a Google Earth Engine App we developed. Thus, we provide a framework for building habitat suitability models and maps to help target adaptive habitat management over broad extents for sensitive species, enabling biologists to improve conservation and restoration efforts regularly as conditions change in highly variable ecosystems. We demonstrate this approach for Yuma Ridgway's rails, but our methods for merging hierarchical statistical models with open-source mapping software to describe spatial-temporal heterogeneity in habitat quality are applicable to any species, and are especially helpful to species inhabiting highly variable ecosystems.

Arizona, California, Nevada↗

USGS2012

Distribution and geochemistry of selected trace elements in the Sacramento River near Keswick Reservoir

The effect of heavy metals from the Iron Mountain Mines (IMM) Superfund site on the upper Sacramento River is examined using data from water and bed sediment samples collected during 1996-97. Relative to surrounding waters, aluminum, cadmium, cobalt, copper, iron, lead, manganese, thallium, zinc and the rare-earth elements (REE) were all present in high concentrations in effluent from Spring Creek Reservoir (SCR), which enters into the Sacramento River in the Spring Creek Arm of Keswick Reservoir. SCR was constructed in part to regulate the flow of acidic, metal-rich waters draining the IMM Superfund site. Although virtually all of these metals exist in SCR in the dissolved form, upon entering Keswick Reservoir they at least partially converted via precipitation and/or adsorption to the particulate phase. In spite of this, few of the metals settled out; instead the vast majority was transported colloidally down the Sacramento River at least to Bend Bridge, 67 km from Keswick Dam. The geochemical influence of IMM on the upper Sacramento River was variable, chiefly dependent on the flow of Spring Creek. Although the average flow of the Sacramento River at Keswick Dam is 250 m 3 /s (cubic meters per second), even flows as low as 0.3 m 3 /s from Spring Creek were sufficient to account for more than 15% of the metals loading at Bend Bridge, and these proportions increased with increasing Spring Creek flow. The dissolved proportion of the total bioavailable load was dependent on the element but steadily decreased for all metals, from near 100% in Spring Creek to values (for some elements) of less than 1% at Bend Bridge; failure to account for the suspended sediment load in assessments of the effect of metals transport in the Sacramento River can result in estimates which are low by as much as a factor of 100.

California↗

USGS2013

Introduction to the special issue on ‘Frontiers in gas geochemistry’

The study of the geochemistry of gases pervades the Earth and Environmental Sciences. This is due in no small measure to the well-established thermodynamic properties of gases which allow their application to a variety of processes occurring over a wide spectrum of natural conditions. In this respect, both major and associated minor gases have been proven useful: indeed, the trace gases have been particularly important given their role as sensitive geochemical tracers. Examples where gas geochemistry places key constraints on geochemical processes include the degassing history of the solid Earth to form the atmosphere and oceans, the origin and migration characteristics of hydrocarbon deposits, the scale of climate variability, the P–T characteristics of geothermal reservoirs, and the dynamics of the earthquake cycle and volcanic activity, to name but a few. This volume continues this rich tradition with an eclectic selection of papers aimed at exploring and exploiting gas geochemistry over a myriad set of research themes.

Chemical Geology↗

USGS2008

Mineralogy and geochemistry of boehmite-rich coals: New insights from the Haerwusu Surface Mine, Jungar Coalfield, Inner Mongolia, China

Boehmite-rich coal of Pennsylvanian age was discovered earlier at the Heidaigou Surface Mine, Jungar Coalfield, Inner Mongolia, China. This paper reports new results on 29 bench samples of the no. 6 coal from a drill core from the adjacent Haerwusu Surface Mine, and provides new insights into the origin of the minerals and elements present. The results show that the proportion of inertinite in the no. 6 coal is higher than in other Late Paleozoic coals in northern China. Based on mineral proportions (boehmite to kaolinite ratio) and major element concentrations in the coal benches of the drill core, the no. 6 coal may be divided into five sections (I to V). Major minerals in Sections I and V are kaolinite. Sections II and IV are mainly kaolinite with a trace of boehmite, and Section III is high in boehmite. The boehmite is derived from bauxite in the weathered surface (Benxi Formation) in the sediment-source region. The no. 6 coal is rich in Al2O3 (8.89%), TiO2 (0.47%), Li (116????g/g), F (286????g/g), Ga (18????g/g), Se (6.1????g/g), Sr (350????g/g), Zr (268????g/g), REEs (172????g/g), Pb (30????g/g), and Th (17????g/g). The elements are classified into five associations by cluster analysis, i.e. Groups A, B, C, D, and E. Group A (ash-SiO2-Al2O3-Na2O-Li) and Group B (REE-Sc-In-Y-K2O-Rb-Zr-Hf-Cs-U-P2O5-Sr-Ba-Ge) are strongly correlated with ash yield and mainly have an inorganic affinity. The elements that are negatively or less strongly correlated with ash yield (with exceptions of Fe2O3, Be, V, and Ni) are grouped in the remaining three associations: Group C, Se-Pb-Hg-Th-TiO2-Bi-Nb-Ta-Cd-Sn; Group D, Co-Mo-Tl-Be-Ni-Sb-MgO-Re-Ga-W-Zn-V-Cr-F-Cu; and Group E, S-As-CaO-MnO-Fe2O3. Aluminum is mainly distributed in boehmite, followed by kaolinite. The high correlation coefficients of the Li-ash, Li-Al2O3, and Li-SiO2 pairs indicate that Li is related to the aluminosilicates in the coal. The boehmite-rich coal is high in gallium and F, which occur in boehmite and the organic matter. Selenium and Pb are mainly in epigenetic clausthalite fillings in fractures. The abundant rare earth elements in the coal benches were supplied from two sources: the bauxite on the weathered surface of the Benxi Formation and from adjacent partings by groundwater leaching during diagenesis. The light rare earth elements (LREEs) are more easily leached from the partings and incorporated into the organic matter than the heavy REEs, leading to a higher ratio of LREEs to HREEs in the coal benches than in the overlying partings. ?? 2008 Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗

USGS2010

Geochemistry of trace elements in coals from the Zhuji Mine, Huainan Coalfield, Anhui, China

The abundances of nine major elements and thirty-eight trace elements in 520 samples of low sulfur coals from the Zhuji Mine, Huainan Coalfield, Anhui, China, were determined. Samples were mainly collected from 10 minable coal seams of 29 boreholes during exploration. The B content in coals shows that the influence of brackish water decreased toward the top of coal seams; marine transgression and regression occurred frequently in the Lower Shihezi Formation. A wide range of elemental abundances is found. Weighted means of Na, K, Fe, P, Be, B, Co, Ni, Cr, Se, Sb, Ba, and Bi abundances in Zhuji coals are higher, and the remainder elements are either lower or equal to the average values of elements in coals of northern China. Compared to the Chinese coals, the Zhuji coals are higher in Na, K, Be, B, Cr, Co, Se, Sn, Sb, and Bi, but lower in Ti, P, Li, V and Zn. The Zhuji coals are lower only in S, P, V and Zn than average U.S. and world coals. Potassium, Mg, Ca, Mn, Sr, As, Se, Sb and light rare earth elements (LREE) had a tendency to be enriched in thicker coal seams, whereas Fe, Ti, P, V, Co, Ni, Y, Mo, Pb and heavy rare earth elements (HREE) were inclined to concentrate in thinner coal seams. The enrichment of some elements in the Shanxi or Upper Shihezi Formations is related to their depositional environments. The elements are classified into three groups based on their stratigraphic distributions from coal seams 3 to 11-2, and the characteristics of each group are discussed. Lateral distributions of selected elements are also investigated. The correlation coefficients of elemental abundances with ash content show that the elements may be classified into four groups related to modes of occurrence of these elements. ?? 2009 Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗

USGS2025

A laboratory-based spectrometer intercomparison for the measurement of snow spectra

Seasonal snow is an integral component of global hydrological systems, global energy budget and Earth's climate. As an important part of many Earth systems, seasonal snow is also an essential source of water for many human populations and ecosystems around the world. As such, the measurement of seasonal snow and characterization of uncertainty in those measurements is crucial. To elucidate potential uncertainty attributable to commonly used field spectrometers (and to a lesser extent imaging spectrometers) and associated reference panels, this work presents results from an intercalibration experiment conducted synchronously with the NASA 2023 Snow Experiment (SnowEx) Albedo campaign near Fairbanks, Alaska USA. Three sets of experiments were carried out under controlled laboratory conditions to characterize the radiometric and spectral wavelength consistency of the instruments as well as the white reference panels used to calculate reflectance from field measurements. Although there was generally good agreement between the instruments, panels, and the references, there were also some notable differences. One instrument showed an average − 74 % change from the reference for radiance, and multiple instruments exceeded the suggested 0.5 nm threshold for spectral wavelength scale. The Discussion section highlights how some of these findings and their implications could improve future field campaigns and general use/maintenance of these high-precision scientific instruments.

Alaska↗

USGS2014

Global ocean conveyor lowers extinction risk in the deep sea

General paradigms of species extinction risk are urgently needed as global habitat loss and rapid climate change threaten Earth with what could be its sixth mass extinction. Using the stony coral Lophelia pertusa as a model organism with the potential for wide larval dispersal, we investigated how the global ocean conveyor drove an unprecedented post-glacial range expansion in Earth׳s largest biome, the deep sea. We compiled a unique ocean-scale dataset of published radiocarbon and uranium-series dates of fossil corals, the sedimentary protactinium–thorium record of Atlantic meridional overturning circulation (AMOC) strength, authigenic neodymium and lead isotopic ratios of circulation pathways, and coral biogeography, and integrated new Bayesian estimates of historic gene flow. Our compilation shows how the export of Southern Ocean and Mediterranean waters after the Younger Dryas 11.6 kyr ago simultaneously triggered two dispersal events in the western and eastern Atlantic respectively. Each pathway injected larvae from refugia into ocean currents powered by a re-invigorated AMOC that led to the fastest postglacial range expansion ever recorded, covering 7500 km in under 400 years. In addition to its role in modulating global climate, our study illuminates how the ocean conveyor creates broad geographic ranges that lower extinction risk in the deep sea.

Deep Sea Research Part A, Oceanographic Research P↗

USGS2022

Accessibility of environmental data for sharing: The role of UX in large cyberinfrastructure projects

Incorporating user experience (UX) testing when creating research cyberinfrastructure is often overlooked, but if left too late, the cost of retrofitting is considerable, and the very clients the cyberinfrastructure was built to serve may be lost. Successfully integrating UX testing into the product development cycle can be difficult but rewarding. This paper describes how UX evaluations were incorporated over ten years of operation of DataONE ( www.dataone.org ), a multi-sector science research cyberinfrastructure project created to support the discovery, access, and sustainability of data about life on Earth and the environment that sustains it. The diverse stakeholders in DataONE include data creators and users such as researchers and government workers across the broad scope of the earth and environmental sciences as well as those who hold and manage data such as libraries and data repositories. Between 2009 and 2019 DataONE members designed and constructed data management tools and services to fulfill the DataONE objectives. To assist in achieving its goals, a participatory design approach was used by establishing several largely volunteer and stakeholder-representative working groups, including the Usability and Assessment Working Group. This Working Group conducted over forty UX evaluations to assess the usability of DataONE products and websites at various stages of the development process. In addition to improving the usability of DataONE products, the UX evaluations fostered community involvement by building trust and engagement with the products being developed. The DataONE UX experience yields several important lessons which will improve the success of other projects. It is our conclusion that UX testing should be a mandatory part of the design of any cyberinfrastructure project.

Ecological Informatics↗