SEARCH · Geology Reports

Results for “Data”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67Linked to original sources

USGS1969

Hydrologic and climatologic data, 1968, Salt Lake County, Utah

An investigation of the water resources of Salt Lake County, Utah, was undertaken by the Water Resources Division of the U.S. Geological Survey in July 1963. This investigation is a cooperative project financed chiefly by equal contributions of the State of Utah and the Federal Government in accordance with an agreement between the Division of Water Rights, Utah Department of Natural Resources, and the Geological Survey. The investigation was financed during the period covered by this report by the following organizations: Utah Division of Water Rights (formerly State Engineer), Utah Division of Water Resources (formerly Water and Power Board), Salt Lake County, Salt Lake County Water Conservancy District, Central Utah Water Conservancy District, Metropolitan Water District of Salt Lake City, City of Murray, Granger-Hunter Improvement District, Taylorsville-Bennion Improvement District, Holladay Water Company, Magna Water and Sewer District, U.S. Bureau of Reclamation, U.S. Geological Survey The investigation encompasses the collection and interpretation of a large variety of climatologic, hydrologic, and geologic data in and near Salt Lake County. Utah Basic-Data Releases 11-13 and 15 contain data collected through 1967. This release contains climatologic and surface-water data for the 1968 water year (October 1967 to September 1968) and ground-water data collected during the 1968 calendar year. This is the final annual release of basic data for this investigation. Interpretive reports summarizing the results are in preparation. Organizations that furnished data are acknowledged in station descriptions and footnotes to tables.

Utah↗

USGS2023

The Landscape Data Commons: A system for standardizing, accessing, and applying large environmental datasets for agroecosystem research and management

Understanding where, when, and why agroecosystems are changing requires quality information about ecosystems that span land tenure, ecological processes, and spatial scales. Over the past two decades, land management agencies and research groups have adopted a suite of standardized methods for monitoring rangelands, which have been implemented at over 85,000 monitoring locations globally. However, the ability to use these data to understand agroecosystem dynamics and change across scales and across land ownership has been limited because, until now, these data have not been available in a harmonized, accessible format for analyses, modeling, and decision-support tools. We present the Landscape Data Commons, a cyberinfrastructure platform that harmonizes and aggregates standardized agroecosystem data, enables linkages to models, and facilitates analysis and interpretation of data within decision-support tools. The Landscape Data Commons provides a community platform for users to contribute data and develop next-generation tools to support agroecosystem management through the 21st century.

Agricultural & Environmental Letters↗

USGS2026

Incorporating data sets with multiple sources of uncertainty in integrated species distribution models

Data integration methods aim to improve species distribution estimates by incorporating multiple sources of uncertainty across datasets. Two major sources of uncertainty are: (1) variation in sampling effort across space and within datasets, and (2) variation in reliability associated with data collection protocols or timing among datasets. Our goal was to evaluate how different approaches to address these uncertainties influence predictive performance of integrated models. We modeled distributions of four bird species using three datasets that differed in sampling design. We examined three strategies to reduce uncertainty: (1) filtering data, (2) incorporating functions that account for uncertainty in observation models, and (3) varying how datasets are integrated into a single estimate. We first examine methods to account for variable effort in observations, focusing on both spatial differences in sampling intensity and effort given to a single observation record. We then examine approaches to account for data sets with differing reliability. Sampling effort was best addressed through conservative filtering, including spatial thinning and excluding observations with highly variable effort. Next, we considered how to account for potential false positive detections—due to either misidentification or changes in distributions. We found that treating less reliable data as a covariate, an approach previously suggested for data integration that can greatly speed up model fitting, performed well. Other effective approaches included directly modeling false positive rates and complete exclusion of less reliable data sets. Our results provide insights into best practices in integrated modeling for handling uncertainty in integrated models. We demonstrate the flexible options available when using integrated models to address uncertainty.

Pennsylvania↗

USGS2014

Inferences about population dynamics from count data using multi-state models: A comparison to capture-recapture approaches

Wildlife populations consist of individuals that contribute disproportionately to growth and viability. Understanding a population's spatial and temporal dynamics requires estimates of abundance and demographic rates that account for this heterogeneity. Estimating these quantities can be difficult, requiring years of intensive data collection. Often, this is accomplished through the capture and recapture of individual animals, which is generally only feasible at a limited number of locations. In contrast, N-mixture models allow for the estimation of abundance, and spatial variation in abundance, from count data alone. We extend recently developed multistate, open population N-mixture models, which can additionally estimate demographic rates based on an organism's life history characteristics. In our extension, we develop an approach to account for the case where not all individuals can be assigned to a state during sampling. Using only state-specific count data, we show how our model can be used to estimate local population abundance, as well as density-dependent recruitment rates and state-specific survival. We apply our model to a population of black-throated blue warblers ( Setophaga caerulescens ) that have been surveyed for 25 years on their breeding grounds at the Hubbard Brook Experimental Forest in New Hampshire, USA. The intensive data collection efforts allow us to compare our estimates to estimates derived from capture–recapture data. Our model performed well in estimating population abundance and density-dependent rates of annual recruitment/immigration. Estimates of local carrying capacity and per capita recruitment of yearlings were consistent with those published in other studies. However, our model moderately underestimated annual survival probability of yearling and adult females and severely underestimates survival probabilities for both of these male stages. The most accurate and precise estimates will necessarily require some amount of intensive data collection efforts (such as capture–recapture). Integrated population models that combine data from both intensive and extensive sources are likely to be the most efficient approach for estimating demographic rates at large spatial and temporal scales.

New Hampshire↗

USGS2016

Leveraging constraints and biotelemetry data to pinpoint repetitively used spatial features

Satellite telemetry devices collect valuable information concerning the sites visited by animals, including the location of central places like dens, nests, rookeries, or haul‐outs. Existing methods for estimating the location of central places from telemetry data require user‐specified thresholds and ignore common nuances like measurement error. We present a fully model‐based approach for locating central places from telemetry data that accounts for multiple sources of uncertainty and uses all of the available locational data. Our general framework consists of an observation model to account for large telemetry measurement error and animal movement, and a highly flexible mixture model specified using a Dirichlet process to identify the location of central places. We also quantify temporal patterns in central place use by incorporating ancillary behavioral data into the model; however, our framework is also suitable when no such behavioral data exist. We apply the model to a simulated data set as proof of concept. We then illustrate our framework by analyzing an Argos satellite telemetry data set on harbor seals ( Phoca vitulina ) in the Gulf of Alaska, a species that exhibits fidelity to terrestrial haul‐out sites.

Alaska↗

USGS2025

Sparse genetic data limit biodiversity assessments in protected areas globally

Global conservation targets include protecting genetic diversity within species. Yet few studies have assessed whether protected areas (PAs) include genetically diverse populations across species globally. A first step is understanding the availability of population genetic data that could be used in these assessments. We surveyed georeferenced population-level nuclear (as opposed to mitochondrial or plastid-based) genetic data across continents and marine biomes (36,354 populations, 2809 species) and found substantial geographic and taxonomic gaps. Most data were concentrated in Europe and North America, with major gaps in Africa and Asia. For most taxonomic groups, data were available for <1% of described species. Globally, 52.08% of the total areal extent of PAs lacked genetically sampled populations. These gaps in data availability highlight the need for targeted genetic data collection, harmonization, and sharing to improve genetic diversity monitoring and conservation planning. Combined with proxy-based genetic indicators, such data are needed to inform PA assessments, bolster area-based conservation initiatives like 30 × 30, and support achievement of global genetic conservation targets.

Frontiers in Ecology and the Environment↗

USGS2025

Power source, data retrieval method, and attachment type affect success of dorsally mounted tracking tag deployments in 37 species of shorebirds

Animal-borne trackers are commonly used to study bird movements, including in long-distance migrants such as shorebirds. Selecting a tracker and attachment method can be daunting, and methodological advancements often have been made by trial and error and conveyed by word of mouth. We synthesized tracking outcomes across 2745 dorsally mounted trackers on 37 shorebird species around the world. We evaluated how attachment method, power source, data retrieval method, relative tracker mass, and biological traits affected success, where success was defined as whether or not each tag deployment reached its expected tracking duration (i.e. all aspects succeeded for the intended duration of the study: attachment, tracking, data acquisition, and bird survival). We conducted separate analyses for tag deployments with remote data retrieval (‘remote-upload tag deployments') and those that archived data and had to be recovered (‘archival tag deployments'). Among remote-upload tag deployments, those that were a lighter mass relative to the bird, were beyond their first year of production, transmitted data via satellite, or were attached with a leg-loop harness were most often successful at reaching their expected tracking duration. Archival tag deployments were most successful when applied at breeding areas, or when applied to males in any season. Remote-upload tag deployments with solar power, satellite data retrieval, or leg-loop harnesses continued tracking for longer than those with battery power, other types of data retrieval, or glue attachments. However, the majority of tag deployments failed to reach their expected tracking duration (71% of remote-upload, 83% of archival), which could have been due to tracker failure, attachment failure, or bird mortality. Our findings highlight that many tag deployments may fail to meet the goals of a study if tracking duration is crucial. Using our results, we provide guidelines for selecting a tracker and attachment to improve success at meeting study goals.

Journal of Avian Biology↗

USGS2022

Integrating distance sampling survey data with population indices to separate trends in abundance and temporary immigration

Managers rely on accurate estimators of wildlife abundance and trends for management decisions. Despite the focus of contemporary wildlife science on developing methods to improve inference from wildlife surveys, legacy datasets often rely on index counts that lack information about the detection process. Data integration can be a useful tool for combining index counts with data collected under more rigorous designs (i.e., designs that account for the detection process), but care is required when datasets represent different population processes or are mismatched in space and time. This can be particularly problematic in cases where animals aggregate in response to a spatially or temporally limited resource because individuals may temporarily immigrate from outside the study area and be included in the abundance index. Abundance indices based on brown bear ( Ursus arctos ) feeding aggregations within coastal meadows in early summer in Lake Clark National Park and Preserve, Alaska, USA, are one such example. These indices reflect the target population (brown bears residing within the park) and temporary immigrants (i.e., bears drawn from outside the park boundary). To properly account for the effects of temporary immigration, we integrated the index data with abundance data collected via park-wide distance sampling surveys, the latter of which properly addressed the detection process. By assuming that the distance data provide inference on abundance and the index counts represent some combination of abundance and temporary immigration processes, we were able to decompose the relative contribution of each to overall trend. We estimated that the density of brown bears within our study area was 38–54 adults/1,000 km 2 during 2003–2019 and that abundance increased at a rate of approximately 1.4%/year. The contribution of temporary immigrants to overall trend in the index was low, so we created 3 hypothetical scenarios to more fully demonstrate how the integrated approach could be useful in situations where the composite trend in meadow counts may obscure trends in abundance (e.g., opposing trends in abundance and temporary immigration). Our work represents a conceptual advance supporting the integration of legacy index data with more rigorous data streams and is broadly applicable in cases where trends in index values may represent a mixture of population processes.

Alaska↗

USGS2018

Efficacy of using data from angler-caught Burbot to estimate population rate functions

The effective management of a fish population depends on the collection of accurate demographic data from that population. Since demographic data are often expensive and difficult to obtain, developing cost‐effective and efficient collection methods is a high priority. This research evaluates the efficacy of using angler‐supplied data to monitor a nonnative population of Burbot Lota lota . Age and growth estimates were compared between Burbot collected by anglers and those collected in trammel nets from two Wyoming reservoirs. Collection methods produced different length‐frequency distributions, but no difference was observed in age‐frequency distributions. Mean back‐calculated lengths at age revealed that netted Burbot grew faster than angled Burbot in Fontenelle Reservoir. In contrast, angled Burbot grew slightly faster than netted Burbot in Flaming Gorge Reservoir. Von Bertalanffy growth models differed between collection methods, but differences in parameter estimates were minor. Estimates of total annual mortality ( A ) of Burbot in Fontenelle Reservoir were comparable between angled ( A = 35.4%) and netted fish (33.9%); similar results were observed in Flaming Gorge Reservoir for angled (29.3%) and netted fish (30.5%). Beverton–Holt yield‐per‐recruit models were fit using data from both collection methods. Estimated yield differed by less than 15% between data sources and reservoir. Spawning potential ratios indicated that an exploitation rate of 20% would be required to induce recruitment overfishing in either reservoir, regardless of data source. Results of this study suggest that angler‐supplied data are useful for monitoring Burbot population dynamics in Wyoming and may be an option to efficiently monitor other fish populations in North America.

Wyoming↗

USGS2025

A framework for analyzing wild turkey summer sighting data.

Wildlife agencies collect data on productivity (e.g., proportion of hens with poults and number of poults per hen) of wild turkey ( Meleagris gallopavo ) to monitor population status and trends. However, sampling protocols to collect productivity data rely on opportunistic observations reported by wildlife agency personnel and the public and have changed over time and differed among agencies. A protocol to standardize data collection was adopted by most state wildlife agencies in 2019, but long-term historical datasets exist that cannot be analyzed readily to make inferences about spatial and temporal patterns in wild turkey productivity. We developed statistical models to allow comparisons and model trends in productivity among and within states even though data collection protocols changed over time and differed among states. We found greater spatial variation in the proportion of hens with poults than the number of poults per brood, which may reflect how environmental factors influence wild turkey productivity. Our models can also provide inferences about productivity when data are limited or temporally discontinuous for some spatial units. Additionally, we found that temporal and spatial variation in data collection, even under the new protocol, can affect inferences about trends in productivity. The statistical models we developed address the uncontrolled nature of when and where data are collected and offer the ability to investigate long-term patterns of productivity in relation to factors such as changing climate or habitat conditions.

Maryland, New Jersey, New York, Ohio, Pennsylvania↗

USGS2026

Comparison of data handling techniques for modeling bat acoustic activity

With the proliferation of acoustic sampling to investigate bat distribution and ecology, researchers have implemented a myriad of statistical modeling approaches to interpret findings. Bats are taxa of high conservation concern; therefore, ensuring the accuracy of species-level habitat association models is critical for informing management. We sought to determine prediction differences among statistical approaches to modeling counts of acoustic detections, using generalized linear mixed models with 8 acoustic data-handling techniques. We applied each approach or combination of approaches to a rare species, the northern long-eared bat ( Myotis septentrionalis ), and a common species, the eastern red bat ( Lasiurus borealis ), from summer survey results on a landscape in south-central Pennsylvania, USA, 2024. We evaluated the accuracy of habitat association models of bat acoustic activity at the species level using cross-validation and compared resulting predictions of models using spatial correlations. We determined that filtering data by automated identification software (Kaleidoscope Pro), the maximum likelihood estimate (MLE) P -value thresholds reduced relative mean absolute error (rMAE) in cross-validation of northern long-eared bat models. Using the MLE-retained data produced the most accurate predictions over using raw data or the overly conservative match ratio data. However, for the eastern red bat, the results from the most conservative approach of only retaining data with at least a 90% match ratio from software development training sets had the lowest rMAE. We have provided evidence that the current standard of filtering data by nightly MLE can result in more accurate and informative habitat-use acoustic activity models for rare bat species.

Pennsylvania↗

USGS1993

An objective replacement method for censored geochemical data

Geochemical data are commonly censored, that is, concentrations for some samples are reported as "less than" or "greater than" some value. Censored data hampers statistical analysis because certain computational techniques used in statistical analysis require a complete set of uncensored data. We show that the simple substitution method for creating an uncensored dataset, e.g., replacement by 3/4 times the detection limit, has serious flaws, and we present an objective method to determine the replacement value. Our basic premise is that the replacement value should equal the mean of the actual values represented by the qualified data. We adapt the maximum likelihood approach (Cohen, 1961) to estimate this mean. This method reproduces the mean and skewness as well or better than a simple substitution method using 3/4 of the lower detection limit or 3/4 of the upper detection limit. For a small proportion of "less than" substitutions, a simple-substitution replacement factor of 0.55 is preferable to 3/4; for a small proportion of "greater than" substitutions, a simple-substitution replacement factor of 1.7 is preferable to 4/3, provided the resulting replacement value does not exceed 100%. For more than 10% replacement, a mean empirical factor may be used. However, empirically determined simple-substitution replacement factors usually vary among different data sets and are less reliable with more replacements. Therefore, a maximum likelihood method is superior in general. Theoretical and empirical analyses show that true replacement factors for "less thans" decrease in magnitude with more replacements and larger standard deviation; those for "greater thans" increase in magnitude with more replacements and larger standard deviation. In contrast to any simple substitution method, the maximum likelihood method reproduces these variations. Using the maximum likelihood method for replacing "less thans" in our sample data set, correlation coefficients were reasonably accurately estimated in 90% of the cases for as much as 40% replacement and in 60% of the cases for 80% replacement. These results suggest that censored data can be utilized more than is commonly realized. ?? 1993 International Association for Mathematical Geology.

Mathematical Geology↗

USGS1976

Resource data bases-Resource assessment

The U.S. Geological Survey's Office of Resource Analysis is developing computer methods for the handling of mineral-resources data in order to provide improved means for addressing and manipulating data. These methods include: computerized data files and predictive resource models. Data files contain the raw or disaggregated information on mineral deposits and commodities. One operational data file is CRIB (Computerized Resources Information Bank) which is a general purpose inventory and reference file on metallic and nonmetallic mineral deposits. A computer file on resources should contain detailed information on the following main categories: record identification, name and location, description of deposit, analytical data, and production/reserves. A resource model employs postulates and inferences in conjunction with the data to make predictions about resources-as key variables concerning a mineral commodity are changed. The objective is to estimate the availability of minerals including: geological availability (occurrence models), technological availability (exploration and beneficiation models), and economic availability (economics models). ?? 1976.

Computers & Geosciences↗

USGS1976

The national coal-resources data system of the U.S. geological survey

The National Coal Resources Data System (NCRDS) was designed by the U.S. Geological Survey (USGS) to meet the increasing demands for rapid retrieval of information on coal location, quantity, quality, and accessibility. An interactive conversational query system devised by the USGS retrieves information from the data bank through a standard computer terminal. The system is being developed in two phases. Phase I, which currently is available on a limited basis, contains published areal resource and chemical data. The primary objective of this phase is to retrieve, calculate, and tabulate coal-resource data by area on a local, regional, or national scale. Factors available for retrieval include: state, county, quadrangle, township, coal field, coal bed, formation, geologic age, source and reliability of data, and coal-bed rank, thickness, overburden, and tonnage, or any combinations of variables. In addition, the chemical data items include individual values for proximate and ultimate analyses, BTU value, and several other physical and chemical tests. Information will be validated and deleted or updated as needed. Phase II is being developed to store, retrieve, and manipulate basic point source coal data (e.g., field observations, drill-hole logs), including geodetic location; bed thickness; depth of burial; moisture; ash; sulfur; major-, minor-, and trace-element content; heat value; and characteristics of overburden, roof rocks, and floor rocks. The computer system may be used to generate interactively structure-contour or isoline maps of the physical and chemical characteristics of a coal bed or to calculate coal resources. ?? 1976.

Computers & Geosciences↗

USGS2020

Estimating population persistence for at-risk species using citizen science data

Population persistence probability is valuable for characterizing risk to species and informing listing and conservation decisions but is challenging to estimate through traditional methods for rare, data-limited species. Modeling approaches have used citizen science data to mitigate data limitations of focal species and better estimate parameters such as occupancy and detection, but their use to estimate persistence and inform conservation decisions is limited. We developed an approach to estimate persistence using only occurrence records of the target species and citizen science occurrence data of non-target species to account for search effort and imperfect detection. We applied the approach to a highly cryptic and data-limited species, the southern hognose snake ( Heterodon simus ), as part of its USFWS Species Status Assessment, and estimated current (in 2018) and future persistence under plausible scenarios of varying levels of urbanization, sea level rise, and management. Of 222 known populations, 133 (60%) are likely extirpated currently (persistence probability < 50%), and 165 (74%) populations are likely to be extirpated by 2080 with no additional management. Future management scenarios that included strategies to acquire and improve habitat on currently unprotected lands with existing populations lessened the estimated rate of population declines. These results can directly inform listing decisions and conservation planning for the southern hognose snake by Federal, State, and other partners. Our approach – using occurrence records and auxiliary data from non-target species to estimate population persistence – is applicable across rare and at-risk species for evaluating extinction risk with limited data and prioritizing management actions.

Biological Conservation↗

USGS2022

gTOOLS, an open-source MATLAB program for processing high precision, relative gravity data for time-lapse gravity monitoring

gTOOLS is an open-source software for the processing of relative gravity data. gTOOLS is available in MATLAB and as a compiled executable to be run under the free MATLAB Runtime Compiler. The software has been designed for time-lapse (temporal) gravity monitoring. Although programmed to read the Scintrex CG-5 and CG-6 gravimeters output data files, it can be easily modified to read data files from other gravimeters. The software binds together single-task processing modules within a very simple user interface that is based on one text file. Gravity processing involves three modules: (a) gravimeter calibration; (b) automatic processing of gravity data to find adjusted gravity differences; and (c) post processing of results. Each module is optional and runs independently from the others. Data processing includes (a) averaging out the measurements noise, and correction for solid Earth tides, and ocean loading, and residual instrumental drift, and (b) calculate the residual instrumental drift and gravity differences between the base station and monitoring sites, and their uncertainties, by a weighted least square analysis of the gravity data. The software allows the automatic processing of a gravity campaign spanning multiple days in a single run. The software is tested on gravity data from 2015 eruption at Cotopaxi volcano, Ecuador.

Computers & Geosciences↗

USGS2007

PVTx properties of the CO 2 -H 2 O and CO 2 -H 2 O-NaCl systems below 647 K: assessment of experimental data and thermodynamic models

Evaluation of CO 2 sequestration in formation brine or in seawater needs highly accurate experimental data or models of pressure–volume–temperature-composition ( PVTx ) properties for the CO 2 –H 2 O and CO 2 –H 2 O–NaCl systems. This paper presents a comprehensive review of the experimental PVTx properties and the thermodynamic models of these two systems. The following conclusions are drawn from the review: (1) About two-thirds of experimental data are consistent with each other, where the uncertainty in liquid volumes is within 0.5%, and that in gas volumes within 2%. However, this accuracy is not sufficient for assessing CO 2 sequestration. Among the data sets for liquids, only a few are available for accurate modeling of CO 2 sequestration. These data have an error of about 0.1% on average, roughly covering from 273 to 642 K and from 1 to 35 MPa; (2) There is a shortage of volumetric data of saturated vapor phase. (3) There are only a few data sets for the ternary liquids, and they are inconsistent with each other, where only a couple of data sets can be used to test a predictive density model for CO 2 sequestration; (4) Although there are a few models with accuracy close to that of experiments, none of them is accurate enough for CO 2 sequestration modeling, which normally needs an accuracy of density better than 0.1%. Some calculations are made available on www.geochem-model.org .

Chemical Geology↗

USGS2017

Sparse targets in hydroacoustic surveys: Balancing quantity and quality of in situ target strength data

Hydroacoustic sampling of low-density fish in shallow water can lead to low sample sizes of naturally variable target strength (TS) estimates, resulting in both sparse and variable data. Increasing maximum beam compensation (BC) beyond conventional values (i.e., 3 dB beam width) can recover more targets during data analysis; however, data quality decreases near the acoustic beam edges. We identified the optimal balance between data quantity and quality with increasing BC using a standard sphere calibration, and we quantified the effect of BC on fish track variability, size structure, and density estimates of Lake Erie walleye ( Sander vitreus ). Standard sphere mean TS estimates were consistent with theoretical values (−39.6 dB) up to 18-dB BC, while estimates decreased at greater BC values. Natural sources (i.e., residual and mean TS) dominated total fish track variation, while contributions from measurement related error (i.e., number of single echo detections (SEDs) and BC) were proportionally low. Increasing BC led to more fish encounters and SEDs per fish, while stability in size structure and density were observed at intermediate values (e.g., 18 dB). Detection of medium to large fish (i.e., age-2+ walleye) benefited most from increasing BC, as proportional changes in size structure and density were greatest in these size categories. Therefore, when TS data are sparse and variable, increasing BC to an optimal value (here 18 dB) will maximize the TS data quantity while limiting lower-quality data near the beam edges.

Ohio↗