SEARCH · Geology Reports

Results for “Nature, Scientific Data”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66Linked to original sources

USGS2016

Regional chloride distribution in the Northern Atlantic Coastal Plain aquifer system from Long Island, New York, to North Carolina

The aquifers of the Northern Atlantic Coastal Plain are the principal source of water supply for the region’s nearly 20 million residents. Water quality and water levels in the aquifers, and maintenance of streamflow, are of concern because of the use of this natural resource for water supply and because of the possible effects of climate change and changes in land use on groundwater. The long-term sustainability of this natural resource is a concern at the local community scale, as well as at a regional scale, across state boundaries. In 2010, the U.S. Geological Survey (USGS) began a regional assessment of the Northern Atlantic Coastal Plain aquifers. An important part of this assessment is a regional interpretation of the extent of saltwater and the proximity of saltwater to fresh-groundwater resources and includes samples and published interpretations of chloride concentrations newly available since the last regional chloride assessment in 1989. This updated assessment also includes consideration of chloride samples and refined interpretations that stem from the 1994 discovery of the buried 35 million year old Chesapeake Bay impact structure that has substantially altered the understanding of the hydrogeologic framework and saltwater distribution in eastern Virginia. In this study, the regional area of concern for the chloride samples and interpretations extends from the Fall Line in the west to the outer edge of the Continental Shelf in the east and from the eastern tip of Long Island in the north to about halfway down the North Carolina coast in the south. Discussions of chloride distribution are presented for each of the 10 regional aquifer layers of the Northern Atlantic Coastal Plain, including the offshore extents. Maps of interpreted lines of equal concentration or isochlors were manually prepared for nine of the regional aquifers; a map was not prepared for the surficial regional aquifer. The isochlor interpretations include the offshore extent of the nine regional aquifers and are presented on a 1:2,000,000 scale base map. Vertically, the chloride samples and interpretations range from deepest (oldest) to shallowest (youngest)—Potomac-Patuxent, Potomac-Patapsco, Magothy, Matawan, Monmouth-Mount Laurel, Aquia, Piney Point, Lower Chesapeake, and Upper Chesapeake regional aquifers. The approach of this study maximizes the overall density of chloride information and data by assessing relevant published interpretations, all USGS chloride samples, and all relevant offshore samples in one comprehensive interpretation. Published isochlors, where they were interpreted by regional aquifer, were used as much as possible for this regional isochlor assessment. Publication dates for the isochlors used range from 1982 to 2015, and the scales for the isochlors range from local (county or municipality) to state (sub-regional) to regional. The USGS National Water Information System database provided well sample data for the parts of aquifers that are mainly beneath the land areas and yielded 37,517 water-quality records for 1903 through 2011. Published data reports from four phases of research-related offshore coring (1976, 1993, 1997, 2009) were the main source of water-quality data for the parts of aquifers from the shoreline to the outer edge of the Continental Shelf and yielded samples from multiple depths of each of 13 cores. This study also used interpretations and offshore core data from the last regional chloride assessment (1989) which, in addition to 7 offshore cores, included water-quality data from about 500 wells, and borehole geophysics interpretations from a subset of 11 wells. All published information and data that were used in this study were considered time independent and did not assess the published interpretations or data for temporal trends. The approach used here examined only published interpretations and available chloride data, and did not directly use supplemental techniques that can provide insight into the distribution of saltwater, such as geochemical characterization, borehole geophysical information, and geochronology. Isochlor maps for this study are limited to manual interpretations of the 250-milligram per liter (mg/L) and 10,000-mg/L boundaries developed for 9 of the 10 regional aquifers that constitute the regional hydrogeologic framework of the Northern Atlantic Coastal Plain. For a given aquifer, the approach was to initially consider published isochlor interpretations, where available, then to modify the published interpretations, if necessary, to the extent indicated by the well and core samples. The final step was to interpolate isochlors to the full extent of each aquifer layer in areas with sufficient samples or cited interpretations, or to extrapolate isochlors in areas with no samples or where samples were sparse. The principal limitation of this study is that, because of its regional extent, data and information density can vary greatly, and thus confidence in interpretations can vary widely for onshore and offshore areas across the study area. In areas of sparse data, some samples of elevated chloride could be misinterpreted as being part of a regional elevated chloride trend, and in other cases, an elevated concentration could be misinterpreted as being of only local importance. The interpretive work of this study was applied to a 1:2,000,000 scale base map. Locations of isochlors, wells, cores, political boundaries, and shorelines are meant to be considered approximate. The isochlors presented in this study were manually interpreted for each aquifer unit as a conceptual representation of an equal concentration line approximately in the middle of an aquifer’s thickness. Differences in chloride concentration lines between the top and bottom of an aquifer could be substantial, especially for the thick parts of aquifers, but that information is not presented in this regional assessment. Although additional offshore chloride data are available compared to 27 years ago (1989), the offshore information remains sparse, resulting in less confidence in the offshore interpretations than in the onshore interpretations. Regionally, the 250- and 10,000-mg/L isochlors tend to map progressively eastward from the deepest to the shallowest aquifers across the Northern Atlantic Coastal Plain aquifer system but with some exceptions. The additional data, conceptual understanding, and interpretations in the vicinity of the buried Chesapeake Bay impact structure in eastern Virginia resulted in substantial refinement of isochlors in that area. Overall, the interpretations in this study are updates of the previous regional study from 1989 but do not comprise major differences in interpretation and do not indicate regional movement of the freshwater-saltwater interface since then.

Delaware, Maryland, New Jersey, New York, North Ca↗

USGS2010

Occurrence and distribution of organic chemicals and nutrients and comparison of water-quality data from public drinking-water supplies in the Columbia aquifer in Delaware, 2000-08

The U.S. Geological Survey, in cooperation with the Delaware Department of Natural Resources and Environmental Control and the Delaware Geological Survey, conducted a groundwater-quality investigation to (a) describe the occurrence and distribution of selected contaminants, and (b) document any changes in groundwater quality in the Columbia aquifer public water-supply wells in the Coastal Plain in Delaware between 2000 and 2008. Thirty public water-supply wells located throughout the Columbia aquifer of the Delaware Coastal Plain were sampled from August through November of 2008. Twenty-two of the wells in the sampling network for this project were previously sampled in 2000. Eight new wells were selected to replace wells no longer in use. Groundwater collected from the wells was analyzed for the occurrence and distribution of selected pesticides, pesticide degradates, volatile organic compounds, nutrients, and major inorganic ions. Nine of the wells were analyzed for radioactive elements (radium-226, radium-228, and radon). Groundwater-quality data were compared for sites sampled in both 2000 and 2008 to document any changes in water quality. One or more pesticides were detected in samples from 29 of the 30 wells. There were no significant differences in pesticide and pesticide degradate concentrations and similar compounds were detected when comparing sampling results from 2000 and 2008. Pesticide and pesticide degradate concentrations were generally less than 1 microgram per liter. Twenty-four compounds, 14 pesticides, and 10 pesticide degradates were detected in at least one sample; the pesticide degradates, metolachlor ethanesulfonic acid, deethylatrazine, and alachlor ethanesulfonic acid were the most frequently detected compounds, each found in more than 50 percent of samples. Almost 80 percent of the detected pesticides were agricultural herbicides, which reflects the prevalence and wide distribution of agriculture in sampled areas, as well the dominance of agricultural pesticides among the target analytes for this study. No concentration of a pesticide or pesticide degradate exceeded any regulatory standard. Dieldrin, an insecticide that has been banned for several decades, was detected at a concentration that exceeded a non-regulatory health-based screening level of 0.002 micrograms per liter at nine sites. Volatile organic compounds (VOCs) were generally detected at concentrations of less than 1 microgram per liter, although 7 of the 31 detected VOCs had concentrations greater than 1 microgram per liter. There were no significant differences in VOC concentrations from 2000 to 2008; however, among the resampled wells, the mean number of VOCs detected per well was significantly different over the 8-year period. The number of VOCs detected per well decreased in 73 percent of the resampled wells; the decrease ranged from one to eight fewer detections in 2008 than in 2000. Chloroform and methyl tert-butyl ether were the most frequently detected VOCs, at 90 percent and 63 percent, respectively, among the 30 wells. Solvents were the most frequently detected class of VOCs. All measured concentrations of VOCs in groundwater were below established standards for drinking water and below other health-based guidelines. There were no significant differences in nutrient or major-ion concentrations between 2000 and 2008, however, the medians of two field measurements, pH and dissolved oxygen, were significantly higher in 2008 than in 2000 in the resampled wells. Although pH and dissolved oxygen were higher, water was still acidic and predominantly oxic. Nitrate was the predominant nutrient species in the Columbia aquifer, with a 90-percent detection frequency. The median nitrate concentration in groundwater was 4.88 milligrams per liter, which was slightly lower than, but not significantly different from, the median of 5.23 milligrams per liter for the 2000 samples. Concentrations of nitrate exceeded the U.S. Environmental Protection Agency's Maximum Contaminant Level or Federal drinking-water standard of 10 milligrams per liter as nitrogen in samples from two wells. Eight of the 30 wells sampled had iron or manganese concentrations that exceeded the U.S. Environmental Protection Agency's Secondary Maximum Contaminant Level; nine samples exceeded the Health Advisory Limit set by the Delaware Division of Public Health of 20 milligrams per liter for sodium in drinking water. Two radiochemical isotopes, radium-226 and radon-222, were detected in all nine groundwater samples analyzed; five samples had detectable levels of radium-228 activity. None of the samples exceeded the U.S Environmental Protection Agency's Maximum Contaminant Level for radium or radon in drinking water. Although radioactive elements were more frequently detected in 2008 than in 2000, this increased detection frequency is more likely due to lower detection levels in 2008 than 2000. The average age of groundwater entering the screens of the production wells sampled in 2008 ranged from 6 to 35 years, with a median groundwater age of 22 years. Groundwater age was positively correlated with well depth and negatively correlated with dissolved oxygen. Data from the 22 resampled wells indicate a significant positive difference in the average modeled groundwater-sample-age results. The average groundwater age from samples collected in 2008 was generally 7 years older than the average groundwater age from samples collected in 2000.

Delaware↗

USGS2011

Hydrogeology, chemical characteristics, and water sources and pathways in the zone of contribution of a public-supply well in San Antonio, Texas

In 2001, the National Water-Quality Assessment (NAWQA) Program of the U.S. Geological Survey initiated a series of studies on the transport of anthropogenic and natural contaminants (TANC) to public-supply wells (PSWs). The main goal of the TANC project was to better understand the source, transport, and receptor factors that control contaminant movement to PSWs in representative aquifers of the United States. Regional- and local-scale study areas were selected from within existing NAWQA study units, including the south-central Texas Edwards aquifer. The local-scale TANC study area, nested within the regional-scale NAWQA study area, is representative of the regional Edwards aquifer. The PSW selected for study is within a well field of six production wells. Although a single PSW was initially selected, because of constraints of well-field operation, samples were collected from different wells within the well field for different components of the study. Data collected from all of the well-field wells were considered comparable because of similar well construction, hydrogeology, and geochemistry. An additional 38 PSWs (mostly completed in the confined part of the aquifer) were sampled throughout the regional aquifer to characterize water quality. Two monitoring well clusters, with wells completed at different depths, were installed to the east and west of the well field (the Zarzamora and Timberhill monitoring well clusters, respectively). One of the monitoring wells was completed in the overburden to evaluate potential hydrologic connectivity with the Edwards aquifer. Geophysical and flowmeter logs were collected from one of the well-field PSWs to determine zones of contribution to the wellbore. These contributing zones, associated with different hydrogeologic units, were used to select monitoring well completion depths and groundwater sample collection depths for depth-dependent sampling. Depth-dependent samples were collected from the PSW from three different depths and under three different pumping conditions. Additionally, selected monitoring wells and one of the well-field PSWs were sampled several times in response to a rainfall and recharge event to assess short-term (event-scale) temporal variations in water quality. For comparison purposes, groundwater samples were categorized as being from regional aquifer PSWs, from the well field (wellhead samples), from the monitoring wells (excluding the overburden well), from the overburden well, from the PSW depth-dependent sampling, and from temporal sampling. Groundwater samples were analyzed for inorganic, organic, isotopic, and age-dating tracers to characterize geochemical conditions in the aquifer and provide understanding of the mechanisms of mobilization and movement of selected constituents from source areas to a PSW. Sources, tracers, and conditions used to assess water quality and processes affecting the PSW and the aquifer system included (1) carbonate host rock composition; (2) physicochemical constituents; (3) major and trace element concentrations; (4) saturation indices with respect to minerals in aquifer rocks; (5) elemental ratios, such as magnesium to calcium ratios, that are indicative of water-rock interaction processes; (6) oxidation-reduction conditions; (7) nutrient concentrations, in particular nitrate concentrations; (8) the isotopic composition of nitrate, which can point to specific nitrate sources; (9) strontium isotopes; (10) stable isotopes of hydrogen and oxygen; (11) organic contaminant concentrations, including pesticides and volatile organic compounds; (12) age tracers, apparent-age distribution, and dissolved gas data used in age interpretations; (13) depth-dependent water chemistry collected from the PSW under different pumping conditions to assess zones of contribution; and (14) temporal variability in groundwater composition from the PSW and selected monitoring wells in response to an aquifer recharge event. Geochemical results indicate that the well-field and monitoring well samples were largely representative of groundwater in the regional confined aquifer. Constituents of concern in the Edwards aquifer for the long-term sustainability of the groundwater resource include the nutrient nitrate and anthropogenic organic contaminants. Nitrate concentrations (as nitrogen) for regional aquifer PSWs had a median value of 1.9 milligrams per liter, which is similar to previously reported values for the regional aquifer. Nitrate-isotope compositions for groundwater samples collected from the well-field PSWs and monitoring wells had a narrow range, with values indicative of natural soil organic values. A comparison with historical nitrate-isotope values, however, suggests that a component of nitrate in groundwater from biogenic sources might have increased over the last 30 years. Several organic contaminants (the pesticide atrazine, its degradate deethylatrazine, trichloromethane (chloroform; a drinking-water disinfection byproduct), and the solvent tetrachloroethene (PCE)) were widely distributed throughout the regional aquifer and in the local-scale TANC study area at low concentrations (less than 1 microgram per liter). Higher concentrations of PCE were detected in samples from the well-field PSWs and Zarzamora monitoring wells relative to the regional aquifer PSWs. The urban environment is a likely source of contaminants to the aquifer, and these results indicate that one or more local urban sources might be supplying PCE to the Zarzamora monitoring wells and the well-field wells. Samples from the well field also had high concentrations of chloroform relative to the monitoring wells and regional aquifer PSWs. For samples from the regional aquifer PSWs, the most frequently detected organic contaminants generally decreased in concentration with increasing well depth. Deeper wells might intercept longer regional flow paths with higher fractions of older water or water recharged in rural recharge areas in the western part of the aquifer that have been less affected by anthropogenic contaminants. A scenario of hypothetical contaminant loading was evaluated by using results from groundwater-flow-model particle tracking to assess the response of the aquifer to potential contamination. Results indicate that the aquifer responds quickly (less than 1 year to several years) to contaminant loading; however, it takes a relatively long time (decades) for concentrations to reach peak values. The aquifer also responds quickly (less than 1 year to several years) to the removal of contaminant loading; however, it also takes a relatively long time (decades) to reach near background concentrations. Interpretation of geochemical age tracers in this well-mixed karst system was complicated by contamination of a majority of measured tracers and complexities of extensive mixing. Age-tracer results generally indicated that groundwater samples were composed of young, recently recharged water with piston-flow model ages ranging from less than 1 to 41 years, with a median of 17 years. Although a piston-flow model is typically not valid for karst aquifers, the model ages provide a basis for comparing relative ages of different samples and a reference point for more complex hydrogeologic models for apparent-age interpretations. Young groundwater ages are consistent with particle-tracking results from hydrogeologic modeling for the local-scale TANC study area. Age-tracer results compared poorly with other geochemical indicators of groundwater residence time and anthropogenic effects on water quality, indicating that hydrogeologic conceptual models used in groundwater age interpretations might not adequately account for mixing in this karst system. Groundwater samples collected from the well field under a variety of pumping conditions were relatively homogeneous and well mixed for numerous geochemical constituents (with the notable exception of age tracers). Groundwater contributions to the PSW were dominated by well-mixed, relatively homogeneous groundwater, typical of the regional confined aquifer. Zones of preferential flow were determined for the PSW, but groundwater samples from different stratigraphic units were not geochemically distinct. Variations in chemical constituents in response to a rainfall and aquifer recharge event occurred but were relatively minor in the PSW and monitoring wells. This observation is consistent with the hypothesis that the response to individual recharge events in the confined aquifer, unless intersecting conduit flow paths, might be attenuated by mixing processes along regional flow paths. Results of this study are consistent with the existing conceptual understanding of aquifer processes in this karst system and are useful for water-resource development and management practices.

Texas↗

USGS2006

Physical and hydrochemical evidence of lake leakage near Jim Woodruff Lock and Dam and of ground-water inflow to Lake Seminole, and an assessment of karst features in and near the lake, southwestern Georgia and northwestern Florida

Hydrogeologic data and water-chemistry analyses indicate that Lake Seminole leaks into the Upper Floridan aquifer near Jim Woodruff Lock and Dam, southwestern Georgia and northwestern Florida, and that ground water enters Lake Seminole along upstream reaches of the lake’s four impoundment arms (Chattahoochee and Flint Rivers, Spring Creek, and Fishpond Drain). Written accounts by U.S. Army Corps of Engineers geologists during dam construction in the late 1940s and early 1950s, and construction-era photographs, document karst-solution features in the limestone that comprise the lake bottom and foundation rock to the dam, and confirm the hydraulic connection of the lake and aquifer. More than 250 karst features having the potential to connect the lake and aquifer were identified from preimpoundment aerial photographs taken during construction. An interactive map containing a photomosaic of 53 photographic negatives was orthorectfied to digital images of 1:24,000-scale topographic maps to aid in identifying karst features that function or have the potential to function as locations of water exchange between Lake Seminole and the Upper Floridan aquifer. Some identified karst features coincide with locations of mapped springs, spring runs, and depressions that are consistent with sinkholes and sinkhole ponds. Hydrographic surveys using a multibeam echosounder (sonar) with sidescan sonar identified sinkholes in the lake bottom along the western lakeshore and in front of the dam. Dye-tracing experiments indicate that lake water enters these sinkholes and is transported through the Upper Floridan aquifer around the west side of the dam at velocities of about 500 feet per hour to locations where water "boils up" on land (at Polk Lake Spring) and in the channel bottom of the Apalachicola River (at the "River Boil"). Water discharging from Polk Lake Spring joins flow from a spring-fed ground-water discharge zone located downstream of the dam; the combined flow disappears into a sinkhole located on the western floodplain of the river and is transmitted through the Upper Floridan aquifer, eventually discharging to the Apalachicola River at the River Boil. Acoustic Doppler current profiling yielded flow estimates from the River Boil in the range from about 140 to 220 cubic feet per second, which represents from about 1 to 3 percent of the average daily flow in the river. Binary mixing-model analysis using naturally occurring isotopes of oxygen and hydrogen (oxygen-18 and deuterium) indicates that discharge from the River Boil consists of a 13-to-1 ratio of lake water to ground water and that other sources of lake leakage and discharge to the boil probably exist. Analyses of major ions, nutrients, radon-222, and stable isotopes of hydrogen and oxygen contained in water samples collected from 29 wells, 7 lake locations, and 5 springs in the Lake Seminole area during 2000 indicate distinct chemical signatures for ground water and surface water. Ground-water samples contained higher concentrations of calcium and magnesium, and higher alkalinity and specific conductance than surface-water samples, which contained relatively high concentrations of total organic carbon and sulfate. Solute and isotopic tracers indicate that, from May to October 2000, springflow exhibited more ground-water qualities (high specific conductance, low dissolved oxygen, and low temperature) than surface water; however, the ratio of ground water to surface water of the springs was difficult to quantify from November to April because of reduced springflow and rapid mixing of springflow and lake water during sampling. The saturation index of calcite in surface-water samples indicates that while surface water is predominately undersaturated with regard to calcite year-round, a higher potential for dissolution of the limestone matrix exists from late fall through early spring than during summer. The relatively short residence time (5–7 hours) and rapid flow velocity (nearly 500 feet per hour) of lake water leaking into the Upper Floridan aquifer and exiting at the River Boil in the Apalachicola River implies that calcite-undersaturated water is in constant contact with the limestone, increasing the potential for limestone dissolution and enlargement of flow pathways by erosion. A relatively low potential exists, however, for limestone dissolution to cause sudden sinkhole collapse followed by catastrophic lake drainage because ground-water levels close to the lake, except near the dam, are nearly the same as lake stage, resulting in low vertical and lateral hydraulic gradients and low flow between the lake and aquifer. An increased potential for lake leakage and sinkhole formation and collapse exists near some in-lake springs during colder months of the year, as density differences and the hydraulic potential between lake water and ground water establish the conditions for calcite-undersaturated lake water to enter nonflowing springs and contact limestone.

Florida, Georgia↗

USGS2014

Assessment of ethylene dibromide, dibromochloropropane, other volatile organic compounds, radium isotopes, radon, and inorganic compounds in groundwater and spring water from the Crouch Branch and McQueen Branch aquifers near McBee, South Carolina, 2010-2012

Public-supply wells near the rural town of McBee, in southwestern Chesterfield County, South Carolina, have provided potable water to more than 35,000 residents throughout Chesterfield County since the early 1990s. Groundwater samples collected between 2002 and 2008 in the McBee area by South Carolina Department of Health and Environmental Control (DHEC) officials indicated that groundwater from two public-supply wells was characterized by the anthropogenic compounds ethylene dibromide (EDB) and dibromochloropropane (DBCP) at concentrations that exceeded their respective maximum contaminant levels (MCLs) established by the U.S. Environmental Protection Agency’s (EPA) National Primary Drinking Water Regulations (NPDWR). Groundwater samples from all public-supply wells in the McBee area were characterized by the naturally occurring isotopes of radium-226 and radium-228 at concentrations that approached, and in one well exceeded, the MCL for the combined isotopes. The local water utility installed granulated activated carbon filtration units at the two EDB- and DBCP-contaminated wells and has, since 2011, shut down these two wells. Groundwater pumped by the remaining public-supply wells is currently (2014) centrally treated at a water-filtration plant. To assess the occurrence, distribution, and potential sources of the anthropogenic and naturally occurring compounds detected in groundwater in the McBee area, samples of groundwater and spring water were collected from public-supply, domestic-supply, agricultural-supply, and monitoring wells and springs, respectively, between 2010 and 2012 by the U.S. Geological Survey. The water samples were analyzed for concentrations of EDB, DBCP, other volatile organic compounds (VOCs), radium-226 and radium-228, radon, and inorganic compounds. All wells sampled were screened in the shallow Crouch Branch aquifer, the deeper McQueen Branch aquifer, or, for most public-supply wells, both aquifers. In areas where no wells existed or wells could not be installed, passive samplers that adsorb EDB, DBCP, and various VOCs, were installed in the shallow subsurface. A representative groundwater flow pathway to each public supply well and selected other wells was determined by using a calibrated three-dimensional groundwater-flow model of the Atlantic Coastal Plain in Chesterfield County and particle-tracking analysis. The aerial extent of the groundwater flow pathway to public-supply wells was mapped by using chlorofluorocarbon-concentration based, apparent-age dates of the groundwater. The water-quality data collected between 2010 and 2012, in conjunction with groundwater flow pathways and historical aerial photographs of land uses near McBee, indicate an area where EDB-, DBCP-, 1,2-dichloropropane-, 1,3-dichloropropane-, and carbon disulfide-contaminated groundwater exists in the Crouch Branch aquifer in the Cedar Creek Basin and north of McBee and is most likely related to the past use of these compounds between the early 1900s and the 1980s as soil fumigants in predominately agricultural areas north of McBee. The highest EDB concentration detected (18.6 micrograms per liter) during the 3-year study was in a groundwater sample from an agricultural-supply well located north of McBee. Other VOCs, such as dichloromethane and 1,1,2-trichloroethane, also were detected in groundwater samples from this EDB-contaminated agricultural-supply well but are from unknown source(s). The fact that the agricultural area north of McBee is located in a recharge area for the Crouch Branch aquifer most likely facilitated the groundwater contamination in this area. DBCP-contaminated groundwater detected in three public-supply wells south of McBee in the deeper McQueen Branch aquifer appears to be related to past soil fumigation practices that used DBCP in agricultural areas located south of McBee. One of the three DBCP-contaminated public-supply wells also contained EDB, most likely present in groundwater due to the release of leaded gasolines that contained EDB as a fuel additive between the 1940s and 1970s. A gasoline-source of EDB, rather than a soil-fumigation source, is supported by the co-detection in groundwater from the well of 1,2-dichloroethane, a lead scavenger compound also added to leaded gasoline. Groundwater pumped from two public-supply wells located within and to the east of the McBee town limits and one domestic-supply well east of McBee was characterized by the detection of 1,1-dichloroethane, trichloroethylene, 1,1-dichloroethylene, and perchloroethylene. Groundwater flow pathways determined for these wells indicate that the potential source(s) of these compounds detected in one public-supply well and the domestic-supply well may be located within the McBee town limits, and that the potential source(s) of these compounds detected in the public-supply well to the east of McBee may be located in an area north of McBee formerly used for agriculture, but used for industry since at least the 1970s. Radium isotopes (defined in this study as the sum of radium-226 and radium-228 concentrations) and radon were detected in all wells sampled in the McBee area between 2010 and 2012. Wells characterized by radium isotope concentrations in groundwater that exceeded the MCL of 5.0 picocuries per liter were also characterized by specific conductance values greater than 30 microsiemens per centimeter and clustered north of McBee in a predominately agricultural area, and in agricultural and urban areas located within and east of McBee. The elevated specific conductance values measured in groundwater from these wells most likely are due to recharge by water mineralized by fertilizer application in agricultural areas, or due to the recharge by water mineralized by septic-tank drain-field effluent near urban areas. Radon was detected in groundwater from all wells sampled, and radon concentrations in groundwater from three monitoring wells exceeded the proposed MCL of 300 picocuries per liter. Concentrations of uranium in groundwater in the McBee area increased with increased groundwater-sample depth, most likely due to the proximity of the sample-collection location to basement rock that contains uranium-bearing minerals.

South Carolina↗

USGS2021

Evaluation of hydrologic simulation models for fields with subsurface drainage to mitigated wetlands in Barnes, Dickey, and Sargent Counties, North Dakota

Proper identification of wetlands, along with a better understanding of the hydrology of mitigated wetlands, is needed to assist with conservation efforts aimed at maintaining the productivity and ecological function (wetland mitigation) of agricultural lands. The U.S. Geological Survey, in cooperation with the U.S. Department of Agriculture Natural Resources Conservation Service, completed a study to evaluate two models for simulating hydrologic conditions in fields with subsurface drainage to mitigated wetlands at several sites in North Dakota. These two models were evaluated as possible tools for water resource managers to use for designing wetland mitigation projects in the area in the future. The Soil-Plant-Atmosphere-Water (SPAW) model simulates the daily hydrologic water budgets of agricultural landscapes by two linked routines, one for farm fields (field hydrology) and one for impoundments such as wetlands and ponds (pond model). The DRAINMOD model was used in conjunction with the SPAW model because although the SPAW model can be used to simulate the hydrology of small drainage basins containing wetlands, the SPAW model does not contain routines to simulate drainage, either subsurface drainage or surface (drainage ditches), that can directly affect the wetland hydrology. The wetlands in the study areas in this report are all downstream from and adjacent to drained agricultural fields. SPAW and DRAINMOD models were developed and calibrated at three study areas (study areas B, D, and S) to evaluate how the models simulated field-scale hydrologic characteristics and the water balance in wetlands from January 1, 2003, through December 31, 2018. The SPAW model developed for study area B included five modeled fields in the field hydrology portion of SPAW that contributed inflow to one wetland simulated in the pond model portion of SPAW. Simulated wetland water depths were most similar to water depths measured at site BWET1, with an absolute mean error of 0.10 foot and a root mean square error of 0.14 foot. Site BWET2 had slightly larger errors, with an absolute mean error of 0.22 foot and a root mean square error of 0.28 foot. Simulated water depths were similar to the pattern of measured water depths at BWET1 and BWET2 from about mid-April 2018 through about mid-September 2018, but overpredicted water depths in the fall from about mid-September 2018 through about mid-October 2018. The SPAW model developed for study area D included six modeled fields in the field hydrology portion of SPAW that contributed inflow to five wetlands connected in series in the pond model portion of SPAW. Simulated water depths compared relatively well to water depths in the five wetlands, with the absolute mean error ranging from 0.17 foot (DWET1) to 0.39 foot (DWET2), and the root mean square error ranging from 0.28 foot (DWET1) to 0.56 foot (DWET5). The SPAW model developed for study area S included one modeled field in the field hydrology portion of SPAW that contributed inflow to one wetland in the pond model portion of SPAW. Among the SPAW models developed for the three study areas, the model for study area S had the best comparison between simulated and measured water depths, with an absolute mean error of 0.06 foot and a root mean square error of 0.10 foot. DRAINMOD models were developed and calibrated at the three study areas and provided inflow from subsurface drainage discharge to the SPAW models for simulating water levels in wetlands in the study areas. The calibrated DRAINMOD model for study area B showed the variability of hydrologic processes in the modeled field throughout the wide range of hydrologic conditions from January 1, 2003, through December 31, 2018. In general, the discharge through the modeled subsurface drainage system was in the spring and early summer (April through June) most years, with little to no discharge later in the year. Although the subsurface drainage system in study area D was the most complex among the three study areas and was simplified into a uniform system within DRAINMOD, simulated water table depths at study area D correlated better to measured water table depths compared to results from the model applications at the other two study areas. Simulated water table depths had an absolute mean error of 0.30 foot and root mean square error of 0.37 foot at site DGW1 and an absolute mean error of 0.29 foot and a root mean square error of 0.34 foot at site DGW2. Although the subsurface drainage system in study area S was the simplest and the modeled field was the smallest among the three study areas, simulated water table depths at study area S did not correlate as well to measured water table depths compared to results from the model applications at the other two study areas. The SPAW and DRAINMOD model applications at the three study areas in southeast North Dakota adequately simulated the hydrologic processes for fields with subsurface drainage that are connected to adjacent wetlands. However, more measured data would be needed to fully evaluate the models throughout the range of possible climatic conditions.

North Dakota↗

USGS2013

Status and understanding of groundwater quality in the South Coast Range-Coastal study unit, 2008: California GAMA Priority Basin Project

Groundwater quality in the South Coast Range–Coastal (SCRC) study unit was investigated from May through November 2008 as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The study unit is located in the Southern Coast Range hydrologic province and includes parts of Santa Barbara and San Luis Obispo Counties. The GAMA Priority Basin Project is conducted by the U.S. Geological Survey (USGS) in collaboration with the California State Water Resources Control Board and the Lawrence Livermore National Laboratory. The GAMA Priority Basin Project was designed to provide a statistically unbiased, spatially distributed assessment of untreated groundwater quality within the primary aquifer system. The primary aquifer system is defined as that part of the aquifer corresponding to the perforation interval of wells listed in the California Department of Public Health (CDPH) database for the SCRC study unit. The assessments for the SCRC study unit were based on water-quality and ancillary data collected in 2008 by the USGS from 55 wells on a spatially distributed grid, and water-quality data from the CDPH database. Two types of assessments were made: (1) status, assessment of the current quality of the groundwater resource, and (2) understanding, identification of the natural and human factors affecting groundwater quality. Water-quality and ancillary data were collected from an additional 15 wells for the understanding assessment. The assessments characterize untreated groundwater quality, not the quality of treated drinking water delivered to consumers by water purveyors. The first component of this study, the status assessment of groundwater quality, used data from samples analyzed for anthropogenic constituents such as volatile organic compounds (VOCs) and pesticides, as well as naturally occurring inorganic constituents such as major ions and trace elements. Although the status assessment applies to untreated groundwater, Federal and California regulatory and non-regulatory water-quality benchmarks that apply to drinking water are used to provide context for the results. Relative-concentrations (sample concentration divided by benchmark concentration) were used for evaluating groundwater. A relative-concentration greater than (>) 1.0 indicates a concentration greater than the benchmark and is classified as high. Inorganic constituents are classified as moderate if relative-concentrations are >0.5 and less than or equal to (≤) 1.0, or low if relative-concentrations are ≤0.5. For organic constituents, the boundary between moderate and low relative-concentrations was set at 0.1. Aquifer-scale proportion was used in the status assessment as the primary metric for evaluating regional-scale groundwater quality. High aquifer-scale proportion is defined as the areal percentage of the primary aquifer system with a high relative-concentration for a particular constituent or class of constituents. Moderate and low aquifer-scale proportions were defined as the areal percentage of the primary aquifer system with moderate and low relative-concentrations, respectively. Two statistical approaches—grid-based and spatially weighted—were used to evaluate aquifer-scale proportions for individual constituents and classes of constituents. Grid-based and spatially weighted estimates were comparable for the study (within 90 percent confidence intervals). For inorganic constituents with human-health benchmarks, relative-concentrations were high for at least one constituent for 33 percent of the primary aquifer system in the SCRC study unit. Arsenic, molybdenum, and nitrate were the primary inorganic constituents with human-health benchmarks that were detected at high relative-concentrations. Inorganic constituents with aesthetic benchmarks, referred to as secondary maximum contaminant levels (SMCLs), had high relative-concentrations for 35 percent of the primary aquifer system. Iron, manganese, total dissolved solids (TDS), and sulfate were the inorganic constituents with SMCLs detected at high relative-concentrations. In contrast to inorganic constituents, organic constituents with human-health benchmarks were not detected at high relative-concentrations in the primary aquifer system in the SCRC study unit. Of the 205 organic constituents analyzed, 21 were detected—13 with human-health benchmarks. Perchloroethene (PCE) was the only VOC detected at moderate relative-concentrations. PCE, dichlorodifluoromethane (CFC-12), and chloroform were detected in more than 10 percent of the primary aquifer system. Of the two special-interest constituents, one was detected; perchlorate, which has a human-health benchmark, was detected at moderate relative-concentrations in 29 percent of the primary aquifer system and had a detection frequency of 60 percent in the SCRC study unit. The second component of this study, the understanding assessment, identified the natural and human factors that may have affected groundwater quality in the SCRC study unit by evaluating statistical correlations between water-quality constituents and potential explanatory factors. The potential explanatory factors evaluated were land use, septic tank density, well depth and depth to top-of-perforations, groundwater age, density and distance to the nearest formerly leaking underground fuel tank (LUFT), pH, and dissolved oxygen (DO) concentration. Results of the statistical evaluations were used to explain the occurrence and distribution of constituents in the study unit. DO was the primary explanatory factor influencing the concentrations of many inorganic constituents. Arsenic, iron, and manganese concentrations increased as DO concentrations decreased, consistent with patterns expected as a result of reductive dissolution of iron and (or) manganese oxides in aquifer sediments. Molybdenum concentrations increased in anoxic conditions and in oxic conditions with high pH, reflecting two mechanisms for the mobilization of molybdenum—reductive dissolution and pH-dependent desorption under oxic conditions from aquifer sediments. Nitrate concentrations decreased as DO concentrations decreased which would be consistent with degradation of nitrate under anoxic conditions (denitrification). It also is possible that nitrate concentrations decreased in relation to increasing depth and groundwater age and not as a result of denitrification. Groundwater age was another explanatory factor frequently correlated to several inorganic constituents. Iron and manganese concentrations were higher in pre-modern (water recharged before 1952) or mixed-age groundwater. This correlation is one indication that iron and manganese are from natural sources. Nitrate, TDS, and sulfate concentrations were higher in modern groundwater (water recharged since 1952) and may indicate that human activities increase concentrations of nitrate, TDS, and sulfate. Land use was a third explanatory factor frequently correlated with inorganic constituents. Nitrate, TDS, and sulfate concentrations were higher in agricultural land-use areas than in natural land-use areas, indicating that increased concentrations may be a result of agricultural practices. Organic constituents usually were detected at low relative-concentrations; therefore, statistical analyses of relations to explanatory factors usually were done for classes of constituents (for example, pesticides or solvents) as well as for selected constituents. The number of VOCs detected in a well was not correlated to any of the explanatory factors evaluated. The number of pesticide and solvent detections and PCE and CFC-12 concentrations were higher in modern groundwater than in pre-modern groundwater. PCE and CFC-12 also were positively correlated to the density of LUFTs. PCE was negatively correlated to natural land use. Chloroform concentrations were positively correlated to the density of septic systems. Perchlorate concentrations were greater in agricultural areas than in urban or natural areas. Correlation of perchlorate with DO may indicate that perchlorate biodegradation under anoxic conditions may occur. Anthropogenic sources have contributed perchlorate to groundwater in the SCRC study unit, although low levels of perchlorate may occur naturally.

California↗

USGS2014

Aquifers of Arkansas: protection, management, and hydrologic and geochemical characteristics of groundwater resources in Arkansas

Sixteen aquifers in Arkansas that currently serve or have served as sources of water supply are described with respect to existing groundwater protection and management programs, geology, hydrologic characteristics, water use, water levels, deductive analysis, projections of hydrologic conditions, and water quality. State and Federal protection and management programs are described according to regulatory oversight, management strategies, and ambient groundwater-monitoring programs that currently (2013) are in place for assessing and protecting groundwater resources throughout the State. Physical attributes, groundwater geochemistry, and groundwater quality are described for each of the 16 aquifers of the State. Information in regard to the hydrology and geochemistry of each of the aquifers is summarized from about 550 historical and recent publications. Additionally, more than 8,000 sites with groundwater-quality data were obtained from the U.S. Geological Survey National Water Information System and the Arkansas Department of Environmental Quality databases and entered into a spatial database to investigate distribution and trends in chemical constituents for each of the aquifers. The 16 aquifers of the State were divided into two major physiographic regions of the State: the Coastal Plain Province (referred to as Coastal Plain) of eastern and southern Arkansas, which includes 11 of the 16 aquifers, and the Interior Highlands Division (referred to as Interior Highlands) of western Arkansas, which includes the remaining 5 aquifers. The 11 aquifers in the Coastal Plain consist of various geologic units that are Cenozoic in age and consist primarily of Cretaceous, Tertiary, and Quaternary sands, gravels, silts, and clays. Groundwater in the Coastal Plain represents one of the most valuable natural resources in the State, driving the economic engines of agriculture, while also supplying abundant water for commercial, industrial, and public-supply use. In terms of age from youngest to oldest, the aquifers of the Coastal Plain include Quaternary alluvial aquifers, including the Mississippi River Valley alluvial aquifer (the most important aquifer in Arkansas in terms of volume of use and economic benefits), the Jackson Group (a regional confining unit that served for decades as an important source of domestic supply), and the Cockfield, Sparta, Cane River, Carrizo, Wilcox, Nacatoch, Ozan, Tokio, and Trinity aquifers. The Mississippi River Valley alluvial aquifer accounts for approximately 94 percent of all groundwater used in the State, and the aquifer is used primarily for irrigation purposes. The Sparta aquifer is the second most important aquifer in terms of use, and the aquifer was used in the past dominantly as a source of public and industrial supply, although increasing irrigation use is occurring because of critically declining water levels in the Mississippi River Valley alluvial aquifer. Other aquifers of the Coastal Plain generally are used as important local sources of domestic, industrial, and public supply, in addition to other minor uses. Water quality generally is good for all aquifers of the Coastal Plain, except for elevated iron concentrations and localized areas of high salinity. The high salinity results from intrusion from underlying formations, evapotranspiration processes in areas of low recharge, and inadequate flushing in downgradient areas of residual salinity from deposition in marine environments. Trends in the spatial distribution of individual chemical constituents are related to position along the flow path for most aquifers of the Coastal Plain. These trends include elevated iron and nitrate concentrations with lower pH values and dissolved solids in groundwater from the outcrop areas, transitioning to lower iron and nitrate (related to changes in redox) and higher pH and dissolved solids (dominantly from the dissolution of carbonate minerals) in groundwater downgradient from outcrop areas. Groundwater generally trended from a calcium- to a sodium-bicarbonate water type with increasing cation exchange along the flow path. The Interior Highlands of western Arkansas has less reported groundwater use than other areas of the State, reflecting a combination of factors. These factors include prevalent and increasing use of surface water, less intensive agricultural uses, lower population and industry densities, lesser potential yield of the resource, and lack of detailed reporting. The overall low yields of aquifers of the Interior Highlands result in domestic supply as the dominant use, with minor industrial, public, and commercial-supply use. Where greater volumes are required for growth of population and industry, surface water is the greatest supplier of water needs in the Interior Highlands. The various aquifers of the Interior Highlands generally occur in shallow, fractured, well-indurated, structurally modified bedrock of this mountainous region of the State, as compared to the relatively flat-lying, unconsolidated sediments of the Coastal Plain. In terms of age from youngest to oldest, the aquifers of the Interior Highlands include: the Arkansas River Valley alluvial aquifer, the Ouachita Mountains aquifer, the Western Interior Plains confining system, the Springfield Plateau aquifer, and the Ozark aquifer. Spatial trends in groundwater geochemistry in the Interior Highlands differ greatly from trends noted for aquifers of the Coastal Plain. In the Coastal Plain, the prevalence of long regional flow paths results in regionally predictable and mappable geochemical changes along the flow paths. In the Interior Highlands, short, topographically controlled flow paths (from hilltops to valleys) within small watersheds represent the predominant groundwater-flow system. As such, dense data coverage from numerous wells would be required to effectively characterize these groundwater basins and define small-scale geochemical changes along any given flow path for aquifers of the Interior Highlands. Changes in geochemistry generally were related to rock type and residence time along individual flow paths. Dominant changes in geochemistry for the Ouachita Mountains aquifer and the Western Interior Plains confining system are attributed to rock/water interaction and changes in redox zonation along the flow path. In these areas, groundwater evolves along flow paths from a calcium- to a sodium-bicarbonate water type with increasing reducing conditions resulting in denitrification, elevated iron and manganese concentrations, and production of methane in the more geochemically evolved and strongest reducing conditions. In the Ozark and Springfield Plateau aquifers, rapid influx of surface-derived contaminants, especially nitrogen, coupled with few to no attenuation processes was attributed to the karst landscape developed on Mississippian- and Ordovician-age carbonate rocks of the Ozark Plateaus. Increasing nitrate concentrations are related to increasing agricultural land use, and areas of mature karst development result in higher nitrate concentrations than areas with less karst features.

Arkasas↗

USGS2013

Hydrogeology, groundwater seepage, nitrate distribution, and flux at the Raleigh hydrologic research station, Wake County, North Carolina, 2005-2007

rom 2005 to 2007, the U.S. Geological Survey and the North Carolina Department of Environment and Natural Resources, Division of Water Quality, conducted a study to describe the geologic framework, measure groundwater quality, characterize the groundwater-flow system, and describe the groundwater/surface-water interaction at the 60-acre Raleigh hydrogeologic research station (RHRS) located at the Neuse River Waste Water Treatment Plant in eastern Wake County, North Carolina. Previous studies have shown that the local groundwater quality of the surficial and bedrock aquifers at the RHRS had been affected by high levels of nutrients. Geologic, hydrologic, and water-quality data were collected from 3 coreholes, 12 wells, and 4 piezometers at 3 well clusters, as well as from 2 surface-water sites, 2 multiport piezometers, and 80 discrete locations in the streambed of the Neuse River. Data collected were used to evaluate the three primary zones of the Piedmont aquifer (regolith, transition zone, and fractured bedrock) and characterize the interaction of groundwater and surface water as a mechanism of nutrient transport to the Neuse River. A conceptual hydrogeologic cross section across the RHRS was constructed using new and existing data. Two previously unmapped north striking, nearly vertical diabase dikes intrude the granite beneath the site. Groundwater within the diabase dike appeared to be hydraulically isolated from the surrounding granite bedrock and regolith. A correlation exists between foliation and fracture orientation, with most fractures striking parallel to foliation. Flowmeter logging in two of the bedrock wells indicated that not all of the water-bearing fractures labeled as water bearing were hydraulically active, even when stressed by pumping. Groundwater levels measured in wells at the RHRS displayed climatic and seasonal trends, with elevated groundwater levels occurring during the late spring and declining to a low in the late fall. Vertical gradients in the groundwater discharge area near the Neuse River were complex and were affected by fluctuations in river stage, with the exception of a well completed in a diabase dike. Water-quality data from the wells and surface-water sites at the RHRS were collected continuously as well as during periodic sampling events. Surface-water samples collected from a tributary were most similar in chemical composition to groundwater found in the regolith and transition zone. Nitrate (measured as nitrite plus nitrate, as nitrogen) concentrations in the sampled wells and tributary ranged from about 5 to more than 120 milligrams per liter as nitrogen. Waterborne continuous resistivity profiling conducted on the Neuse River in the area of the RHRS measured areas of low apparent resistivity that likely represent groundwater contaminated by high concentrations of nitrate. These areas were located on either side of a diabase dike and at the outfall of two unnamed tributaries. The diabase dike preferentially directed the discharge of groundwater to the Neuse River and may isolate groundwater movement laterally. Discrete temperature measurements made within the pore water beneath the Neuse River revealed seeps of colder groundwater discharging into warmer surface water near a diabase dike. Water-quality samples collected from the pore water beneath the Neuse River indicated that nitrate was present at concentrations as high as 80 milligrams per liter as nitrogen on the RHRS side of the river. The highest concentrations of nitrate were located within pore water collected from an area near a diabase dike that was identified as a suspected seepage area. Hydraulic head was measured and pore water samples were collected from two 140-centimeter-deep (55.1-inch-deep) multiport piezometers that were installed in bed sediments on opposite sides of a diabase dike. The concentration of nitrate in pore water at a suspected seepage area ranged from 42 to 82 milligrams per liter as nitrogen with a median concentration of 79 milligrams per liter as nitrogen. On the opposite side of the dike, concentrations of nitrate in pore water samples ranged from 3 to 91 milligrams per liter as nitrogen with a median concentration of 52 milligrams per liter. At one of the multiport piezometers the vertical gradient of hydraulic head between the Neuse River and the groundwater was too small to measure. At the multiport piezometer located in the suspected seepage area, an upward gradient of about 0.1 was present and explains the occurrence of higher concentrations of nitrate near the sediment/water interface. Horizontal seepage flux from the surficial aquifer to the edge of the Neuse River was estimated for 2006. Along a 130-foot flow path, the estimated seepage flux ranged from –0.52 to 0.2 foot per day with a median of 0.09 foot per day. The estimated advective horizontal mass flux of nitrate along a 300-foot reach of the Neuse River ranged from –10.9 to 5 pounds per day with a median of 2.2 pounds per day. The total horizontal mass flux of nitrate from the surficial aquifer to the Neuse River along the 130-foot flow path was estimated to be about 750 pounds for all of 2006. Seepage meters were deployed on the bed of the Neuse River in the areas of the multiport piezometers on either side of the diabase dike to estimate rates of vertical groundwater discharge and flux of nitrate. The average estimated daily seepage flux differed by two orders of magnitude between seepage areas. The potential vertical flux of nitrate from groundwater to the Neuse River was estimated at an average of 2.5 grams per day near one of the multiport piezometers and an average of 784 grams per day at the other. These approximations suggest that under some hydrologic conditions there is the potential for substantial quantities of nitrate to discharge from the groundwater to the Neuse River.

North Carolina↗

USGS2021

Status and understanding of groundwater quality in the northern Sierra Nevada foothills domestic-supply aquifer study units, 2015–17—California GAMA Priority Basin Project

Groundwater quality in the northern Sierra Nevada foothills region of California was investigated as part of California State Water Resources Control Board (SWRCB) Groundwater Ambient Monitoring Assessment Priority Basin Project (GAMA-PBP). The region was divided into two study units: the Yuba-Bear watersheds (YBW) study unit and the American-Cosumnes-Mokelumne watersheds (ACMW) study unit. The GAMA-PBP made a spatially unbiased assessment of aquifer systems used for domestic drinking-water supply in the study region, which are predominantly composed of fractured, hard-rock aquifers of varying lithology. These assessments characterized the quality of raw groundwater to evaluate ambient conditions in the domestic-supply aquifer and not the quality of treated drinking water. The study included three components: (1) a status assessment , which characterized the quality of groundwater resources used for domestic drinking-water supply in the YBW and ACMW study units; (2) an understanding assessment , which evaluated natural and anthropogenic explanatory factors that could potentially affect groundwater quality in the study region; and (3) a comparative assessment between the groundwater resources used for domestic and public drinking-water supply in the study region. The status assessment was based on data collected by the GAMA-PBP from 74 sites in the YBW study unit during 2015–16 and 67 sites in the ACMW study unit from 2016 to 2017. To contextualize water-quality results, concentrations of water-quality constituents in ambient groundwater were compared to regulatory and non-regulatory benchmarks typically used by the State of California and Federal agencies as health-based or aesthetic standards for public drinking water. The status assessment used a grid-based method to estimate proportions of groundwater resources with concentrations approaching or exceeding benchmark thresholds. This method provides spatially unbiased results and allows inter-comparability with similar groundwater-quality assessments. Inorganic constituents with health-based benchmarks were present at high relative concentration (RC), meaning they exceeded the benchmark threshold, in 5.4 and 10 percent of domestic-supply aquifer systems in the YBW and ACMW study units, respectively. Inorganic constituents with aesthetic-based benchmarks were detected at high-RCs in 20 and 28 percent of the YBW and ACMW study units, respectively. The inorganic constituents present at high RC were arsenic, barium, boron, molybdenum, strontium, nitrate, adjusted gross-alpha particle activity, chloride, total dissolved solids, specific conductance, iron, manganese, and hardness. Groundwater samples were tested for presence or absence of three microbial indicators (total coliform, Escherichia coli , and Enterococci ). At least one microbial indicator was present in 26 and 28 percent of the YBW and ACMW study units, respectively. At least one organic constituent was detected in 30 and 42 percent of the YBW and ACMW study units, respectively. Organic constituents were not present at high RC, but tetrachloroethene (PCE), trichloroethene (TCE), and toluene were detected in the YBW study unit at moderate RC (between the benchmark concentration and one-tenth of the benchmark concentration). Methyl tert -butyl ether (MTBE) and chloroform were present at low RC (less than one-tenth of the benchmark concentration) in the YBW and ACMW study units with detection frequencies greater than 10 percent. Perchlorate, a constituent of special interest, was detected in 31 and 41 percent of the YBW and ACMW study units, respectively, at either low or moderate RCs. Relations among select water-quality constituents and potential explanatory factors were evaluated using statistical and graphical approaches. Nitrate, microbial indicators, and perchlorate were all correlated to elevation-dependent variables relating to climate, land use, and recharge condition. Isotopic and dissolved noble-gas tracers indicated these water-quality constituents are associated with recharge conditions associated with irrigation during the summer dry-season, which is common in areas of rural-residential or agricultural land uses. Higher concentrations of iron and manganese were primarily associated with anoxic groundwater in aquifers of metasedimentary lithology. Increased hardness was primarily associated with anoxic groundwater in aquifers of mafic-ultramafic or metavolcanics lithologies at lower elevations in the study region in the Melones fault zone. Chloroform and MTBE were associated with shallow groundwater (wells depths less than 130 m) under oxic and anoxic redox conditions, respectively. The comparative assessment evaluated differences between the aquifer systems used for domestic- and public-supply in study region based on (1) well-construction characteristics, and (2) water quality. Analysis of over 60,000 well-completion reports in the study region showed that although domestic-supply wells span the deepest depth zones in regional aquifers, median depths for public-supply wells were significantly greater than those of domestic-supply wells in both study units. Water-quality data from more than 300 public-supply wells in the study region were assessed using a spatially weighted method for calculation aquifer-scale proportions and compared with the domestic-supply assessment results. Detections of inorganic constituents at high RC and detection frequencies for organic constituents were generally similar between the domestic- and public-supply aquifer systems in both study units, with a few notable exceptions in the ACMW study unit: nitrate was greater for the public- compared to domestic-supply aquifer system and both manganese, hardness, and MTBE were greater in the domestic- compared to public-supply aquifer system. These differences are likely related to contrasting land uses, aquifer lithologies, landscape positions, and depths characterizing domestic- and public-supply wells in the ACMW study unit. Overall, fewer samples from domestic-supply wells in the northern Sierra Nevada foothills exceeded health-based benchmarks compared to aesthetic-based benchmarks for groundwater quality. Exceedences of health-based benchmarks were primarily caused by nitrate and coliform bacteria, which were associated with recharge from diverted surface water used primarily for irrigation. Exceedences of aesthetic-based benchmarks were primarily caused by iron, managanese, and hardness, which were associated with geologic factors. Regional irrigation practices and aquifer lithology can affect groundwater quality in fractured-rock aquifers in the northern Sierra Nevada foothills used for domestic drinking-water supply.

California↗

USGS2014

A reconnaissance spatial and temporal assessment of methane and inorganic constituents in groundwater in bedrock aquifers, Pike County, Pennsylvania, 2012-13

Pike County in northeastern Pennsylvania is underlain by the Devonian-age Marcellus Shale and other shales, formations that have potential for natural gas development. During 2012–13, the U.S. Geological Survey in cooperation with the Pike County Conservation District conducted a reconnaissance study to assess baseline shallow groundwater quality in bedrock aquifers prior to possible shale-gas development in the county. For the spatial component of the assessment, 20 wells were sampled in summer 2012 to provide data on the occurrence of methane and other aspects of existing groundwater quality throughout the county, including concentrations of inorganic constituents commonly present at low levels in shallow, fresh groundwater but elevated in brines. For the temporal component of the assessment, 4 of the 20 wells sampled in summer 2012 were sampled monthly from July 2012 through June 2013 to provide data on seasonal variability in groundwater quality. All water samples were analyzed for major ions, nutrients, selected inorganic trace constituents (including metals and other elements), stable isotopes of water, radon-222, gross alpha- and gross beta-particle activity, dissolved gases (methane, ethane, and ethene), and, if possible, isotopic composition of methane. Additional analyses for boron and strontium isotopes, age-dating of water, and radium-226 were done on water samples collected from six wells in June 2013. Results of the summer 2012 sampling show that water from 16 (80 percent) of 20 wells had detectable concentrations of methane, but concentrations were less than 0.1 milligram per liter (mg/L) in most well-water samples; only two well-water samples had concentrations greater than 1 mg/L. The groundwater with elevated methane also had a chemical composition that differed in some respects (pH, selected major ions, and inorganic trace constituents) from groundwater with low methane concentrations. The two well-water samples with the highest methane concentrations (about 3.7 and 5.8 mg/L) also had the highest pH values (8.7 and 8.3, respectively) and the highest concentrations of sodium, lithium, boron, fluoride, and bromide. Elevated concentrations of some other constituents, such as barium, strontium, and chloride, were not limited to well-water samples with elevated methane, although the two samples with elevated methane also had among the highest concentrations of these constituents. One sample with elevated methane concentrations also had elevated arsenic concentrations, with the arsenic concentration of 30 micrograms per liter (μg/L) exceeding the drinking-water standard of 10 µg/L for arsenic. No other sample from the 20 wells sampled in summer 2012 had concentrations of constituents that exceeded any established primary drinking-water standards. However, radon-222 activities ranging up to 4,500 picocuries per liter (pCi/L) exceeded the proposed drinking-water standard of 300 pCi/L in 85 percent of the 20 well-water samples. The isotopic composition methane in the two high-methane samples (δC CH4 values of -64.55 and -64.41 per mil and δD CH4 values of -216.9 and -201.8 per mil, respectively) indicates a predominantly microbial source for the methane formed by a carbon dioxide reduction process. The stable isotopic composition of water (δD H20 and δ 18 O H20 ) in samples from all 20 wells falls on the local meteoric line, indicating water in the wells was of relatively recent meteoric origin (modern precipitation), including samples with elevated methane concentrations. Analytical results for 4 of the 20 wells sampled monthly for 1 year ending June 2013 in order to assess temporal variability in groundwater quality show that concentrations of major ions generally varied by less than 20 percent, with most differences less than 4 mg/L. Concentrations of methane varied by less than 1 μg/L (0.001 mg/L) in samples from three wells with low methane and by as much as 1 mg/L (1,000 μg/L) in samples from one well with relatively high methane. The isotopic composition of methane in the one well with relatively high methane varied slightly in the monthly samples, ranging from about -64.5 to -64.8 per mil for δ 13 C CH4 and from about -217 to -228 per mil for δD CH4 . The δ 13 C values for dissolved inorganic carbon (DIC) in water from this well were consistent with microbial methane formation by carbon dioxide reduction (drift-type methane) and varied little in the temporal samples, ranging from -10.5 to -10.1 per mil. Additional analyses of samples collected in late June 2013 from six wells with a range of methane and trace constituent concentrations provided baseline data on strontium and boron isotopic compositions ( 87 Sr/ 86 Sr ratios and δ 11 B, respectively) that potentially may be used to differentiate among sources of these constituents. The strontium and boron isotopic composition determined in the six shallow Pike County groundwater samples had 87 Sr/ 86 Sr ratios of 0.71426 to 0.71531 and δ 11 B values of 11.7 to 27.0 per mil, which differ from those reported for brines in Devonian-age formations in Pennsylvania. The June 2013 samples were also analyzed for radium-226 and age-dating dissolved gases. Activities of radium-226 ranged from 0.041 to 0.29 pCi/L in water samples from the six wells and were less than the drinking-water standard of 5 pCi/L for combined radium-226 and radium-228. Age-dating of groundwater using a method based on the presence of anthropogenic gases (chlorofluorocarbons and sulfur hexafluoride) released into the atmosphere yielded estimated recharge dates for water from these six wells that ranged from the 1940s to early 2000s. The oldest water was in samples from wells that had the highest methane concentrations and the youngest water was in samples from a continuously pumped 300-foot deep production well.

Pennsylvania↗

USGS2015

Southern Salish Sea Habitat Map Series: Admiralty Inlet

In 2010 the Environmental Protection Agency, Region 10 initiated the Puget Sound Scientific Studies and Technical Investigations Assistance Program, designed to support research in support of implementing the Puget Sound Action Agenda. The Action Agenda was created in response to Puget Sound having been designated as one of 28 estuaries of national significance under section 320 of the U.S. Clean Water Act, and its overall goal is to restore the Puget Sound Estuary's environment by 2020. The Southern Salish Sea Mapping Project was funded by the Assistance Program request for proposals process, which also supports a large number of coastal-zone- and ocean-management issues. The issues include the recommendations of the Marine Protected Areas Work Group to the Washington State Legislature (Van Cleve and others, 2009), which endorses a Puget Sound and coast-wide marine conservation needs assessment, gap analysis of existing Marine Protected Areas (MPA) and recommendations for action. This publication is the first of four U.S. Geological Survey Scientific Investigation Maps that make up the Southern Salish Sea Mapping Project. The remaining three map blocks to be published in the future, located south of Admiralty Inlet, are shown in figure 1. Puget Sound is a deep, fjord-type estuary covering an area of 2,330 km 2 in the Pacific Northwest region of the United States (fig. 1). It is connected to the ocean by the Strait of Juan de Fuca, a turbulent passage approximately 160 km in length and 22 km wide at its west end, expanding to over 40 km wide at its east end (Thomson, 1994). During the Pleistocene, the area was occupied several times by lobes of continental ice, resulting in a complex basin-fill of glacial and interglacial deposits that are locally as thick as 1100 m (Johnson and others, 2001). The last glaciation, called the Fraser glaciation, began after 28,800±740 14 C yr B.P. when ice started a slow expansion (Clague, 1981). At peak advance the westward Juan de Fuca lobe reached the edge of the continental shelf through the Juan de Fuca Strait shortly before 14,460±200 14 C yr B.P. (Herzer and Bornhold, 1982). The southward Puget lobe advanced to its terminal position in Puget Sound by around 14,150 14 C yr B.P. (Porter and Swanson, 1998). Ice retreated from its maximum to northern Whidbey Island by 13,650±350 14 C yr B.P. (Dethier and others, 1995). Retreating glaciers resulted in a thick sequence of ice-contact, glacial-marine sediment, and early post-glacial sediments (Linden and Schurrer, 1988). These deposits have experienced the effects of a marine transgression followed by regression, resulting in a sea-level several tens of meters lower than the present day (Linden and Schurrer, 1988). A second transgression brought sea level to about the present level by around 5,470±120 14 C yr B.P. (Clague and others, 1982) establishing the present oceanographic and geologic environment Puget Sound is separated into four interconnected basins; Whidbey, Central (Main), Hood Canal, and South (Thomson, 1994). The Whidbey, Central, and Hood Canal basins are the three main branches of the Puget Sound estuary and are separated from the Strait of Juan de Fuca by a double sill at Admiralty Inlet. The Admiralty Inlet map area includes the Inlet and a portion of the Whidbey Basin (fig. 1). The shallower South Basin is separated by a sill at Tacoma Narrows and is highly branched with numerous finger inlets. Flow within Puget Sound is dominated by tidal currents of as much as 1 m/s at Admiralty Inlet, reducing to approximately 0.5 m/s in the Central Basin (Lavelle and others, 1988). The lack of silt and clay-sized sediments in the Admiralty Inlet map area is likely a result of the strong currents (see Ground-Truth Studies for the Admiralty Inlet Map Area, sheet 3). The subtidal component of flow reaches approximately 0.1 m/s and is driven by density gradients arising from the contrast in salty ocean water at the entrance and freshwater inputs from stream flow (Lavelle and others, 1988). The total freshwater input to Puget Sound is approximately 3.4 x 10 6 m 3 /day, primarily from the Skagit River (Cannon, 1983). The subtidal circulation mostly consists of a two-layered flow in the basins with fresher water exiting at the surface and saltier water entering at depth (Ebbesmeyer and Cannon, 2001). In general, surface waters flow north and deeper waters flow south; variations arise from wind effects that can drive a surface current in the same direction as the wind, and a baroclinic response in the lower layer to about 100-m depth (Matsuura and Cannon, 1997). Oceanographic properties are influenced by temporal forcing parameters such as reduced stream flow during the 2000-01 drought that increased surface salinity and decreased differences between surface and bottom waters (Newton and others, 2003). On offshore seismic-reflection profiles, Pleistocene strata (excluding latest Pleistocene glacial and post-glacial deposits) form a distinct seismic unit, bounded below by pre-Tertiary or Tertiary basement and above by typically flat-lying latest Pleistocene to Holocene deposits that fill in erosional or depositional relief (Johnson and others, 2001). Cores from central Puget Sound have accumulation rates that range from 85 to 1200 mg/cm 2 /yr, or 0.12 to 2.4 cm/yr; the highest accumulation rates are near the southern end of central Puget Sound (Carpenter and others, 1985). Carpenter and others (1985) un-weighted arithmetic mean of accumulation rates for central Puget Sound deeper stations is 480±340 (± one standard deviation) mg/cm 2 /yr. Lavelle and others (1985) also found rates as high as 1200 mg/cm 2 /yr over the past approximately 70 years in cores in the Central Basin off of and north and south of Elliott Bay. Puget Sound basin rates are comparable to rates in midshelf silt deposits on the Washington coast north of the Columbia River (Nittrouer and others, 1979). The deep subtidal (in other words, below SCUBA depths) habitats of Puget Sound are relatively poorly known. A few subtidal surveys exist for several habitat types from the 1960s and 1970s (reviewed in Dethier, 1990), using grab and box core data. The Dethier (1990) review divides habitat up into Coast and Marine Ecological Classification Standard (CMECS) substrate, water column energy, and depth zones but does not attempt to map these habitats, rather it is an inventory of habitats found in the area and the flora and fauna associated with each habitat. The approach of the Southern Salish Sea Mapping project is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data (the undersea equivalent of satellite remote-sensing data in terrestrial mapping), acoustic backscatter, seafloor video, seafloor photography, and bottom-sediment sampling data. This approach is based in part on methods presented and data collection and product needs identified at the Washington State Seafloor Mapping Workshop (Washington State Seafloor Mapping Workshop Steering Committee, 2008), attended by coastal and marine managers and scientists. The map products display seafloor geomorphology and substrate, and identify potential marine benthic habitats. It is emphasized that the more interpretive habitat and geology maps rely on the integration of multiple, new high-resolution datasets and that mapping at small scales would not be possible without such data. Oceanographic current and wave data is not included in this analysis, however, the accompanying geographic information system (GIS) data set is designed and intended to be combined with oceanographic and biologic data sets assembled by others in the future and some of the GIS data has already been incorporated in the unpublished Nature Conservancy Benthic Habitats of Puget Sound database. This publication includes four map sheets, explanatory text, and a descriptive pamphlet. Each map sheet is published as a portable document format (PDF) file. ESRI ArcGIS compatible geotiffs (for example, bathymetry) and shapefiles (for example video observation points) will be available for download in the data catalog associated with this publication (Cochrane, 2015). An ArcGIS Project File with the symbology used to generate the map sheets is also provided. For those who do not own the full suite of ESRI GIS and mapping software, the data can be read using ESRI ArcReader, a free viewer that is available at http://www.esri.com/software/arcgis/arcreader/index.html .

Washington↗

USGS2011

Status and understanding of groundwater quality in the Santa Clara River Valley, 2007-California GAMA Priority Basin Project

Groundwater quality in the approximately 460-square-mile Santa Clara River Valley study unit was investigated from April through June 2007 as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The GAMA Priority Basin Project is conducted by the U.S. Geological Survey (USGS) in collaboration with the California State Water Resources Control Board and the Lawrence Livermore National Laboratory. The Santa Clara River Valley study unit contains eight groundwater basins located in Ventura and Los Angeles Counties and is within the Transverse and Selected Peninsular Ranges hydrogeologic province. The Santa Clara River Valley study unit was designed to provide a spatially unbiased assessment of the quality of untreated (raw) groundwater in the primary aquifer system. The assessment is based on water-quality and ancillary data collected in 2007 by the USGS from 42 wells on a spatially distributed grid, and on water-quality data from the California Department of Public Health (CDPH) database. The primary aquifer system was defined as that part of the aquifer system corresponding to the perforation intervals of wells listed in the CDPH database for the Santa Clara River Valley study unit. The quality of groundwater in the primary aquifer system may differ from that in shallow or deep water-bearing zones; for example, shallow groundwater may be more vulnerable to surficial contamination. Eleven additional wells were sampled by the USGS to improve understanding of factors affecting water quality.The status assessment of the quality of the groundwater used data from samples analyzed for anthropogenic constituents, such as volatile organic compounds (VOCs) and pesticides, as well as naturally occurring inorganic constituents, such as major ions and trace elements. The status assessment is intended to characterize the quality of untreated groundwater resources in the primary aquifers of the Santa Clara River Valley study unit, not the quality of treated drinking water delivered to consumers. Relative-concentrations (sample concentration divided by health- or aesthetic-based benchmark concentration) were used for evaluating groundwater quality for those constituents that have Federal and (or) California benchmarks. A relative-concentration greater than 1.0 indicates a concentration greater than a benchmark. For organic and special interest constituents, relative-concentrations were classified as high (greater than 1.0); moderate (greater than 0.1 and less than or equal to 1.0); and low (less than or equal to 0.1). For inorganic constituents, relative-concentrations were classified as high (greater than 1.0); moderate (greater than 0.5 and less than or equal to 1.0); and low (less than or equal to 0.5). Aquifer-scale proportion was used as the primary metric in the status assessment for evaluating regional-scale groundwater quality. High aquifer-scale proportion is defined as the areal percentage of the primary aquifer system with relative-concentrations greater than 1.0. Moderate and low aquifer-scale proportions are defined as the areal percentage of the primary aquifer system with moderate and low relative-concentrations, respectively. Two statistical approaches, grid-based and spatially weighted, were used to evaluate aquifer-scale proportions for individual constituents and classes of constituents. Grid-based and spatially weighted estimates were comparable in the Santa Clara River Valley study unit (within 90 percent confidence intervals). The status assessment showed that inorganic constituents were more prevalent and relative-concentrations were higher than for organic constituents. For inorganic constituents with human-health benchmarks, relative-concentrations (of one or more constituents) were high in 21 percent of the primary aquifer system areally, moderate in 30 percent, and low or not detected in 49 percent. Inorganic constituents with human-health benchmarks with high aquifer-scale proportions were nitrate (15 percent of the primary aquifer system), gross alpha radioactivity (14 percent), vanadium (3.4 percent), boron (3.2 percent), and arsenic (2.3 percent). For inorganic constituents with aesthetic benchmarks, relative-concentrations (of one or more constituents) were high in 54 percent of the primary aquifer system, moderate in 41 percent, and low or not detected in 4 percent. The inorganic constituents with aesthetic benchmarks with high aquifer-scale proportions were total dissolved solids (35 percent), sulfate (22 percent), manganese (38 percent), and iron (22 percent). In contrast, the results of the status assessment for organic constituents with human-health benchmarks showed that relative-concentrations were high in 0 percent (not detected above benchmarks) of the primary aquifer system, moderate in 2.4 percent, and low or not detected in 97 percent. Relative-concentrations of the special interest constituent, perchlorate, were moderate in 12 percent of the primary aquifer system and low or not detected in 88 percent. Relative-concentrations of two VOCs-carbon tetrachloride and trichloroethene (TCE)-were moderate in 2.4 percent of the primary aquifer system. One VOC-chloroform (water disinfection byproduct)-was detected in more than 10 percent of the primary aquifer system but at low relative-concentrations. Of the 88 VOCs and gasoline oxygenates analyzed, 71 were not detected. Pesticides were low or not detected in 100 percent of the primary aquifer system. Of the 118 pesticides and pesticide degradates analyzed, 13 were detected and 5 of those had human-health benchmarks. Two of these five pesticides-simazine and atrazine-were detected in more than 10 percent of the primary aquifer system. The second component of this study, the understanding assessment, was to identify the natural and human factors that affect groundwater quality on the basis of the evaluation of land use, physical characteristics of the wells, and geochemical conditions of the aquifer. Results from these analyses are used to explain the occurrence and distribution of selected constituents in the primary aquifer system of the Santa Clara River Valley study unit. The understanding assessment indicated that water quality varied spatially primarily in relation to depth, groundwater age, reduction-oxidation conditions, pH, and location in the regional groundwater flow system. High and moderate relative-concentrations of nitrate and low relative-concentrations of pesticides were correlated with shallow depths to top-of-perforation, and with high dissolved oxygen. Groundwater of modern and mixed ages had higher nitrate than pre-modern-age groundwater. Decreases in concentrations of total dissolved solids (TDS) and sulfate were correlated with increases in pH. This relationship probably indicates relations of these constituents with increasing depth across most of the Santa Clara River Valley study unit. Previous studies have indicated multiple sources of high concentrations of TDS and sulfate and multiple geochemical processes affecting these constituents in the Santa Clara River Valley study unit. Manganese and iron concentrations were highest in pre-modern-age groundwater at depth and in the downgradient area of the Santa Clara River Valley study unit (closest to the coastline), indicating the prevalence of reducing groundwater conditions in these aquifer zones.

Scientific Investigations Report↗

USGS2016

Surface-water quality and suspended-sediment quantity and quality within the Big River Basin, southeastern Missouri, 2011-13

Missouri was the leading producer of lead in the United States—as well as the world—for more than a century. One of the lead sources is known as the Old Lead Belt, located in southeast Missouri. The primary ore mineral in the region is galena, which can be found both in surface deposits and underground as deep as 200 feet. More than 8.5 million tons of lead were produced from the Old Lead Belt before operations ceased in 1972. Although active lead mining has ended, the effects of mining activities still remain in the form of large mine waste piles on the landscape typically near tributaries and the main stem of the Big River, which drains the Old Lead Belt. Six large mine waste piles encompassing more than 2,800 acres, exist within the Big River Basin. These six mine waste piles have been an available source of trace element-rich suspended sediments transported by natural erosional processes downstream into the Big River. A study was performed by the U.S. Geological Survey in cooperation with U.S. Environmental Protection Agency, Region 7, to calculate and characterize suspended-sediment quantity and quality within the Big River basin after reclamation of the mine waste piles ended in 2012. Streamflow and suspended sediments were quantified and sampled at two locations along a 68-mile reach of the Big River between Bonne Terre and Byrnes Mill, Missouri. The results will help regulatory agencies, such as the U.S. Environmental Protection Agency and U.S. Fish and Wildlife Service, determine impaired reaches and ecosystems for remedial and restoration efforts. Continuous stream stage, water temperature, and turbidity, and discrete suspended-sediment concentration data were collected at the two sites between October 2011 and September 2013. Suspended-sediment samples were collected during various hydrologic conditions to develop a regression model between discrete suspended-sediment concentration and continuous turbidity. Suspended sediments collected during stormflow events were analyzed for concentrations of trace elements such as barium, cadmium, lead, and zinc within two sediment size fractions. Event loads and annual loads of suspended sediment and select trace elements in suspended sediments also were calculated. Suspended-sediment loads computed by the regression model increased downstream from about 201,000 tons at the upstream site to about 355,000 tons at the downstream site during the study period. Stormflow-event-based (hereinafter referred to as “event-based”) suspended-sediment loads ranged from 180 to 32,000 tons at the upstream sampling site and 390 to 53,000 tons at the downstream site along the Big River. Although only seven stormflow events at the upstream site and six at the downstream site were sampled, the event-based suspended-sediment loads accounted for nearly 30 percent of the total suspended-sediment loads computed at both sites, indicating most of the suspended sediment transported through the Big River occurs during higher streamflows. Sediment quality guidelines, known as the threshold effect concentration and the probable effect concentration, used to assess toxicity of trace-element concentrations in sediments were compared to the cadmium, lead, and zinc concentrations in suspended sediment samples collected during stormflow events. All concentrations of cadmium, lead, and zinc in event-based suspended sediment samples exceeded the threshold and probable effect concentrations. Lead and zinc concentrations in the sediment size fraction less than 0.063 millimeters also exceeded the toxic effect threshold, above which sediment is considered to be heavily polluted causing adverse effects on sediment-dwelling organisms. Concentrations of cadmium and zinc in event-based suspended sediment samples were notably higher in samples from the upstream site than samples from the downstream site, indicating the sources of sediments enriched in these trace elements decrease in the downstream area of the watershed. The reduction in concentration of cadmium and zinc could be from dissolution of the constituents during transport or possibly a decrease in downstream source material. The lead concentration exceedance of the probable effects concentration as well as the threshold effects concentration indicates that lead-rich suspended sediments in the fraction less than 0.063 millimeters are readily available within the Big River Basin for transport. These sediments remain in the system from historical mining, and as the reclamation of mine waste piles in the upstream area of the watershed reduce additional sediment loadings, these fine sediments may be continually released as the river scours the streambed and erodes stream banks causing the lead-rich suspended sediment to remain in a state of equilibrium. Barium concentrations in suspended-sediments were nearly twice as high in stormflow event samples collected at the downstream site as compared to samples from the upstream site. The source of barium in the Big River could be from Mineral Fork and Mill Creek, which flow through the historical barite (barium sulfate, also known as tiff) mining district in Washington County, and discharge into the Big River between the two study sites. Total trace-element loads and yields in suspended sediments were computed from the sampled events for each year in the study. The total barium loads in suspended sediments were higher for sampled events collected at the downstream site than the upstream site during both study years. Cadmium and zinc loads in suspended sediments were lower at the downstream site than the upstream site, although the decrease in total load was not substantial during the study period. Lead loads in suspended sediments were lower at the downstream site during the first study year, with a slightly higher load downstream in the second year though the increase from upstream to downstream was small. Event-based yields were higher at the upstream site, indicating that readily available sediment sources are closer to the upstream site where more mining affected areas are located. The estimates determined during large precipitation events indicate that large sources of suspended sediments with large concentrations of trace elements are still available for transport within the Big River.

Missouri↗

USGS2013

Status and understanding of groundwater quality in the Madera, Chowchilla Study Unit, 2008: California GAMA Priority Basin Project

Groundwater quality in the approximately 860-square-mile Madera and Chowchilla Subbasins (Madera-Chowchilla study unit) of the San Joaquin Valley Basin was investigated as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The study unit is located in California's Central Valley region in parts of Madera, Merced, and Fresno Counties. The GAMA Priority Basin Project is being conducted by the California State Water Resources Control Board in collaboration with the U.S. Geological Survey (USGS) and the Lawrence Livermore National Laboratory. The Project was designed to provide statistically robust assessments of untreated groundwater quality within the primary aquifer systems in California. The primary aquifer system within each study unit is defined by the depth of the perforated or open intervals of the wells listed in the California Department of Public Health (CDPH) database of wells used for municipal and community drinking-water supply. The quality of groundwater in shallower or deeper water-bearing zones may differ from that in the primary aquifer system; shallower groundwater may be more vulnerable to contamination from the surface. The assessments for the Madera-Chowchilla study unit were based on water-quality and ancillary data collected by the USGS from 35 wells during April-May 2008 and water-quality data reported in the CDPH database. Two types of assessments were made: (1) status , assessment of the current quality of the groundwater resource, and (2) understanding , identification of natural factors and human activities affecting groundwater quality. The primary aquifer system is represented by the grid wells, of which 90 percent (%) had depths that ranged from about 200 to 800 feet (ft) below land surface and had depths to the top of perforations that ranged from about 140 to 400 ft below land surface. Relative-concentrations (sample concentrations divided by benchmark concentrations) were used for evaluating groundwater quality for those constituents that have Federal or California regulatory or non-regulatory benchmarks for drinking-water quality. A relative-concentration (RC) greater than 1.0 indicates a concentration above a benchmark. RCs for organic constituents (volatile organic compounds and pesticides) and special-interest constituents (perchlorate) were classified as "high" (RC is greater than 1.0), "moderate" (RC is less than or equal to 1.0 and greater than 0.1), or "low" (RC is less than or equal to 0.1). For inorganic constituents (major and minor ions, trace elements, nutrients, and radioactive constituents), the boundary between low and moderate RCs was set at 0.5. The assessments characterize untreated groundwater quality, not the quality of treated drinking water delivered to consumers by water purveyors; drinking-water benchmarks, and thus relative-concentrations, are used to provide context for the concentrations of constituents measured in groundwater. Aquifer-scale proportion was used in the status assessment as the primary metric for evaluating regional-scale groundwater quality. High aquifer-scale proportion is defined as the percentage of the area of the primary aquifer system with RCs greater than 1.0 for a particular constituent or class of constituents; moderate and low aquifer-scale proportions are defined as the percentages of the area of the primary aquifer system with moderate and low RCs, respectively. Percentages are based on an areal, rather than a volumetric basis. Two statistical approaches--grid-based, which used one value per grid cell, and spatially weighted, which used multiple values per grid cell--were used to calculate aquifer-scale proportions for individual constituents and classes of constituents. The spatially weighted estimates of high aquifer-scale proportions were within the 90% confidence intervals of the grid-based estimates for all constituents except iron. The status assessment showed that inorganic constituents had greater high and moderate aquifer-scale proportions in the Madera-Chowchilla study unit than did organic constituents. RCs for inorganic constituents with health-based benchmarks were high in 37% of the primary aquifer system, moderate in 30%, and low in 33%. The inorganic constituents contributing most to the high aquifer-scale proportion were arsenic (13%), uranium (17%), gross alpha particle activity (20%), nitrate (6.7%), and vanadium (3.3%). RCs for inorganic constituents with non-health-based benchmarks were high in 6.7% of the primary aquifer system, and the constituent contributing most to the high aquifer-scale proportion was total dissolved solids (TDS). RCs for organic constituents with health-based benchmarks were high in 10% of the primary aquifer system, moderate in 3.3%, and low in 40%; organic constituents were not detected in 47% of the primary aquifer system. The fumigant 1,2-dibromo-3-chloropropane (DBCP) was the only organic constituent detected at high RCs. Seven organic constituents were detected in 10% or more of the primary aquifer system: DBCP; the fumigant additive 1,2,3-trichloropropane; the herbicides simazine, atrazine, and diuron; the trihalomethane chloroform; and the solvent tetrachloroethene (PCE). RCs for the special-interest constituent perchlorate were moderate in 20% of the primary aquifer system. The second component of this study, the understanding assessment , identified the natural and human factors that may affect groundwater quality by evaluating statistical correlations between water-quality constituents and potential explanatory factors, such as land use, position relative to important geologic features, groundwater age, well depth, and geochemical conditions in the aquifer. Results of the statistical evaluations were used to explain the distribution of constituents in the study unit. Depth to the top of perforations in the well and groundwater age were the most important explanatory factors for many constituents. High and moderate RCs of nitrate, uranium, and TDS and the presence of herbicides, trihalomethanes, and solvents were all associated with depths to the top of perforations less than 235 ft and modern- and mixed-age groundwater. Positive correlations between uranium, bicarbonate, TDS, and the proportion of calcium and magnesium in the total cations suggest that downward movement of recharge from irrigation water contributed to the elevated concentrations of these constituents in the primary aquifer system. High and moderate RCs of arsenic were associated with depths to the top of perforations greater than 235 ft, mixed- and pre-modern-age groundwater, and location in sediments from the Chowchilla River alluvial fan, suggesting that increased residence time and appropriate aquifer materials were needed for arsenic to accumulate in the groundwater. High and moderate RCs of fumigants were associated with depths to the top of perforations of less than 235 ft and location south of the city of Madera; low RCs of fumigants were detected in wells dispersed across the study unit with a range of depths to top of perforations.

California↗

USGS2007

Hydrogeology, Ground-Water-Age Dating, Water Quality, and Vulnerability of Ground Water to Contamination in a Part of the Whitewater Valley Aquifer System near Richmond, Indiana, 2002-2003

Assessments of the vulnerability to contamination of ground-water sources used by public-water systems, as mandated by the Federal Safe Drinking Water Act Amendments of 1996, commonly have involved qualitative evaluations based on existing information on the geologic and hydrologic setting. The U.S. Geological Survey National Water-Quality Assessment Program has identified ground-water-age dating; detailed water-quality analyses of nitrate, pesticides, trace elements, and wastewater-related organic compounds; and assessed natural processes that affect those constituents as potential, unique improvements to existing methods of qualitative vulnerability assessment. To evaluate the improvement from use of these methods, in 2002 and 2003, the U.S. Geological Survey, in cooperation with the City of Richmond, Indiana, compiled and interpreted hydrogeologic data and chemical analyses of water samples from seven wells in a part of the Whitewater Valley aquifer system in a former glacial valley near Richmond. This study investigated the application of ground-water-age dating, dissolved-gas analyses, and detailed water-quality analyses to quantitatively evaluate the vulnerability of ground water to contamination and to identify processes that affect the vulnerability to specific contaminants in an area of post-1972 greenfield development. The aquifer system in the study area includes an unconfined sand and gravel aquifer used for public-water supply (upper aquifer) and a confined sand and gravel aquifer (lower aquifer) separated by a till confining unit. Several hydrogeologic and cultural measures indicate that the upper aquifer is qualitatively vulnerable to contamination: the upper aquifer is unconfined and has a shallow depth to the water table (from about 4.75 to 14 feet below land surface), low-permeability sediments in the unsaturated zone are thin (less than 10 feet thick), estimated ground-water-flow rates through the upper aquifer are relatively rapid (the highest estimated rates ranged from 0.44 to about 5.0 feet per day), and potential contaminant sources were present. Ground-water-age dates indicate that ground-water samples represented recharge from about the time greenfield development began south of the ground-water-flow divide and that changes in water quality would lag changes in contaminant inputs. Estimates of ground-water age, computed with dichlorodifluoromethane (CFC-12) and trichlorotrifluoroethane (CFC-113) concentrations in water samples collected from seven observation wells in February and March 2003, indicated that water in the upper aquifer had recharged within about 13 to 30 years before sampling. Ground-water ages were youngest (from about 13 to 15 years since recharge) in water from the shallow wells along the glacial-valley margin and oldest (30 years) in water from a well at the base of the aquifer in the valley center. Ground-water ages determined for the shallow wells may be affected by mixing of recent recharge with older ground water from deeper in the aquifer, as indicated by upward hydraulic gradients between paired shallow and deep wells in the upper aquifer. Other parts of the Whitewater Valley aquifer system with similar hydrogeologic characteristics could be expected to have similarly young ground-water ages and residence times. Analyses of water samples collected from the seven observation wells in August and September 2002 indicated that concentrations of chloride, sodium, and nitrate generally were larger in ground water from the upper aquifer than in other parts of the Whitewater Valley aquifer system. Drinking-water-quality standards for Indiana were exceeded in water samples from one well for chloride concentrations, from four wells for dissolved-solids concentrations, and from one well for nitrate concentrations. Application of low-level methods for trace-element analyses determined that concentrations of aluminum, cobalt, iron, lithium, molybdenum, nickel, selenium, uranium, vanadium, and zinc were less than or equal to 8 micrograms per liter; concentrations of arsenic, cadmium, chromium, and copper were less than or equal to 1 microgram per liter. Application of low-level analytical methods to water samples enabled the detection of several pesticides and volatile, semivolatile, and wastewater-related organic compounds; concentrations of individual pesticides and volatile organic compounds were less than 0.1 microgram per liter and concentrations of individual wastewater organic compounds were less than 0.5 microgram per liter. The low-level analytical methods will provide useful data with which to compare future changes in water quality. Results of detailed water-quality analyses, ground-waterage dating, and dissolved-gas analyses indicated the vulnerability of ground water to specific types of contamination, the sequence of contaminant introduction to the aquifer relative to greenfield development, and processes that may mitigate the contamination. Concentrations of chloride and sodium and chloride/bromide weight ratios in sampled water from five wells indicated the vulnerability of the upper aquifer to roaddeicer contamination. Ground-water-age estimates from these wells indicated the onset of upgradient road-deicer use within the previous 25 years. Nitrate in the upper aquifer predates the post-1972 development, based on a ground-water-age date (30 years) and the nitrate concentration (5.12 milligrams per liter as nitrogen) in water from a deep well. Vulnerability of the aquifer to nitrate contamination is limited partially by denitrification. Detection of one to four atrazine transformation products in water samples from the upper aquifer indicated biological and hydrochemical processes that may limit the vulnerability of the ground water to atrazine contamination. Microbial processes also may limit the aquifer vulnerability to small inputs of halogenated aliphatic compounds, as indicated by microbial transformations of trichlorofluoromethane and trichlorotrifluoroethane relative to dichlorodifluoromethane. The vulnerability of ground water to contamination in other parts of the aquifer system also may be mitigated by hydrodynamic dispersion and biologically mediated transformations of nitrate, pesticides, and some organic compounds. Identification of the sequence of contamination and processes affecting the vulnerability of ground water to contamination would have been unlikely with conventional assessment methods.

Indiana, Ohio↗

USGS2020

Groundwater quality in relation to drinking water health standards and geochemical characteristics for 54 domestic wells in Clinton County, Pennsylvania, 2017

Despite the reliance on groundwater by approximately 2.4 million rural Pennsylvania residents, publicly available data to characterize the quality of private well water are limited. As part of a regional effort to characterize groundwater in rural areas of Pennsylvania, samples from 54 domestic wells in Clinton County were collected and analyzed in 2017. The samples were evaluated for a wide range of constituents and compared to drinking-water health standards and geochemical characteristics. The sampled wells were completed to depths ranging from 46 to 500 feet in bedrock that was of predominantly sandstone, shale, or carbonate lithology. Results of this study show that the sampled groundwater quality in Clinton County generally met most drinking-water standards that apply to public water supplies. However, a percentage of samples exceeded drinking-water maximum contaminant levels (MCLs) for total coliform bacteria (57.4 percent), Escherichia coli ( E. coli ) (25.9 percent), nitrate (1.9 percent), and arsenic (1.9 percent); and secondary maximum contaminant levels (SMCLs) for pH (31.5 percent), manganese (29.6 percent), iron (13 percent), total dissolved solids (7.4 percent), aluminum (1.9 percent), and chloride (1.9 percent). Sodium concentrations exceeded the U.S. Environmental Protection Agency drinking-water advisory recommendation in 16.7 percent of the samples. Radon-222 activities exceeded the proposed drinking-water standard of 300 picocuries per liter (pCi/L) in 59.3 percent of the samples. The only volatile organic compounds (VOCs) detected were acetone and methyl ethyl ketone in two separate samples; neither constituent exceeded drinking-water standards. Higher median nitrate concentrations were found in the carbonate (3.26 milligrams per liter [mg/L]) versus shale (less than 0.04 mg/L) and sandstone (0.27 mg/L) aquifer subsets. Most of the elevated nitrate concentrations were associated with E. coli detections in the carbonate aquifers, where transmissive bedrock can facilitate groundwater contamination by human activities at the land surface. The median pH of groundwater from the sandstone aquifers (6.53) was less than those for the shale aquifers (7.31) and carbonate aquifers (7.43). Generally, the lower pH samples had greater potential for elevated concentrations of dissolved metals, including beryllium, copper, lead, nickel, and zinc, whereas the higher pH samples had greater potential for elevated concentrations of total dissolved solids, sodium, fluoride, boron, and uranium. Near-neutral samples (pH 6.5 to 7.5) had greater hardness and alkalinity concentrations than other samples with pH outside this range. Many samples from the shale or sandstone aquifers, particularly those with pH less than 6.5, were identified as having serious potential corrosivity based on the combination of the calcite saturation index and the chloride to sulfate mass ratio; however, none of the samples from the carbonate aquifers was identified as seriously corrosive. Groundwater from 3.7 percent of the wells had concentrations of methane greater than the Pennsylvania action level of 7 mg/L, and 48 of the 54 wells (88.9 percent) had detectable concentrations of methane greater than the 0.0002 mg/L detection limit. Greater methane concentrations were found more frequently in groundwater sampled from the shale aquifers than the carbonate or sandstone aquifers in the study area. Most of the samples containing elevated methane (greater than 0.2 mg/L) were located outside the area of the Appalachian Plateaus. The elevated concentrations of methane generally were associated with suboxic groundwater (dissolved oxygen less than 0.5 mg/L) that had near-neutral to alkaline pH and were correlated with concentrations of iron, manganese, ammonia, sodium, lithium, barium, fluoride, and boron. The stable carbon and hydrogen isotopic compositions of methane in two of four samples analyzed for isotopes were consistent with compositions reported for mud-gas logging samples from gas-bearing geologic units (thermogenic gas) in the Appalachian Plateaus region, whereas two others were consistent with methane of microbial origin or a mixture of microbial and thermogenic gas. Forty-two percent of samples had chloride concentrations greater than 20 mg/L with variable bromide concentrations. Corresponding chloride/bromide ratios are consistent with low-bromide sources such as road-deicing salt and septic effluent or animal waste, or, in a few cases, high-bromide brine. Brines characterized by relatively high bromide are naturally present in deeper parts of the regional groundwater system and, in some cases, may be mobilized by gas drilling. The chloride, bromide, and other constituents in road-deicing salt or brine solutions tend to be diluted by mixing with fresh groundwater in shallow aquifers used for water supply. One of the four groundwater samples with methane concentrations greater than 4 mg/L had chloride and bromide concentrations and a chloride/bromide ratio that indicates mixing with a salinity source such as road-deicing salt, whereas the chloride and bromide concentrations and ratios for the other three high-methane samples indicate mixing with a small amount of brine (0.03 percent or less). In two other eastern Pennsylvania county studies where gas drilling is absent, groundwater with comparable chloride/bromide ratios, bromide, and chloride concentrations plus other element associations have been reported. Additional sampling and analysis, such as isotopic analysis of the dissolved gas, fracture analysis, and more detailed evaluation of surrounding land uses, may be warranted to better understand the origin of the methane and brine constituents in groundwater at specific locations.

Pennsylvania↗

USGS2022

Hydrogeologic characterization of the San Antonio Creek Valley watershed, Santa Barbara County, California

The San Antonio Creek Valley watershed (SACVW) is located in western Santa Barbara County, about 15 miles south of Santa Maria and 55 miles north of Santa Barbara, California. The SACVW is about 135 square miles and encompasses the San Antonio Creek Valley groundwater basin; the SACVW is separated from adjacent groundwater basins by the Casmalia and Solomon Hills to the north, and the Purisima Hills to the south. At the western, downstream part of the valley, uplifted, consolidated rocks cause groundwater to discharge at land surface at Barka Slough. Since the late 1800s, groundwater has been the primary source of water for agricultural, military, municipal, and domestic uses. Groundwater withdrawal by pumping exceeded the amount of water replenishing the aquifer system during water years 1948–2018, causing groundwater-level declines of more than 150 feet in parts of the valley and reducing base flow at Barka Slough. Reliance on groundwater for agricultural water use (primarily for the irrigation and frost protection of vineyards, and fruit and berry crops) continues to strain the sustainability of the groundwater system. Through a cooperative agreement, the Santa Barbara County Water Agency and Vandenberg Space Force Base invited the U.S. Geological Survey to address declines in groundwater levels, develop a better understanding of the hydrogeologic system, and provide tools to help evaluate and manage the effects of future development of the San Antonio Creek Valley groundwater basin within the encompassing San Antonio Creek Valley watershed (SACVW). The objectives of this study were to (1) refine the hydrogeologic framework of the San Antonio Creek Valley watershed, (2) quantify the hydrologic budget of the valley, and (3) develop hydrologic modeling tools to evaluate and aid in managing the groundwater resource. This report focuses on the first and second objectives to construct a hydrogeologic framework and characterize the historical and present-day hydrologic conditions of the SACVW during water years 1948–2018. As part of the second objective, work included quantifying the hydrologic budget and evaluating the hydrogeologic system using a combination of existing data and geologic and hydrologic data collected for this study. The groundwater-flow system in the SACVW consists of five hydrogeologic units. These separate water-bearing units were identified based on hydrogeologic properties, such as sediment grain size, vertical-head differences in multiple-depth, monitoring-well sites, long-term groundwater level responses to pumping and climate, and the chemical character of groundwater and groundwater age in the mostly semi-consolidated to unconsolidated basin-fill sediments. The hydrogeologic units that comprise the different aquifers vary in their lithologic composition. The upper and lower aquifers (upper Paso Robles Formation, and lower Paso Robles Formation and Careaga Sandstone, respectively) are relatively coarse grained and are comprised of sand, gravel, and clay; the middle confining unit (the middle Paso Robles Formation) is relatively fine grained and is comprised of primarily clay, silt, and sand. The Pezzoni-Casmalia and Los Alamos faults, which are inferred to transect the SACVW between the western and eastern areas of the valley floor, do not appear to substantially affect the groundwater system. Present-day recharge to the study area occurs primarily as infiltration from precipitation and streams in the upland areas of the Casmalia Hills and Solomon Hills, and along the main channel of San Antonio Creek. Reported estimates of annual natural recharge during water years 1948–2018 generally ranged from about 5,000 acre-feet to more than about 30,000 acre-feet. Stable and radioactive isotopes show that groundwater from the lower aquifer is old and probably was recharged as infiltration from precipitation and streams in the eastern upland areas of the Solomon Hills; however, the infiltration and recharge from these sources probably does not occur under present-day climatic conditions. Anthropogenic recharge, from sources such as return flow from agricultural irrigation, municipal water systems, and wastewater effluent, was estimated to range from about 600 acre-feet in 1948 to about 6,600 acre-feet in 2018. The average annual amount of groundwater removed from the SACVW by pumping during 1948–2018 was estimated to be about 17,200 acre-feet per year, increasing from about 3,000 acre-feet in 1948 to about 32,600 acre-feet in 2018. Estimates of annual pumpage generally exceeded estimates of annual recharge beginning in the mid-1970s and continuing through 2018. The predominant direction of groundwater flow under historical and present-day conditions was from the eastern uplands in the Solomon Hills to the west along San Antonio Creek to the discharge area in Barka Slough, and from the northern uplands in the Casmalia Hills south to San Antonio Creek. Pumpage since the early 1900s and the subsequent groundwater-level declines have substantially reduced the amount of natural groundwater discharge at Barka Slough. Estimates of base flow to San Antonio Creek at the western, downstream extent of the SACVW have varied over time in response to changes in groundwater pumpage and climate; however, there was an overall decline in base flow during water years 1956–2018, decreasing from an average of about 1,700 acre-feet per year during 1956–69, to about 300 acre-feet per year during 2016–18. The long-term extraction of groundwater correlates with a decrease in groundwater levels by more than about 150 feet since the early 1940s in the eastern part of the basin near Los Alamos, and as much as about 50 feet in the upland areas and in the western part of the basin. At Barka Slough, groundwater levels have declined below land surface in some places, altering native riparian vegetation in and around the slough. Surface-water quality in the SACVW varied depending on location and the time of year the samples were collected and on the amount of annual precipitation Most groundwater in the SACVW was calcium-bicarbonate-type water with total dissolved-solids concentrations of about 500–800 milligrams per liter generally representing water naturally recharged as infiltration from precipitation and streams. Total dissolved-solids concentrations in some wells ranged from 800 to 8,000 milligrams per liter, suggesting mixing of naturally recharged infiltrated water with water associated with oil-bearing geologic formations, agricultural products, or the evaporation of shallow groundwater. Concentrations of total dissolved solids and the chemical constituents chloride, nitrate plus nitrite (as nitrogen), calcium, and magnesium at selected wells generally increased during water years 1980–2018; increasing concentrations of these constituents may be associated with the expansion of agriculture in the watershed over time and the corresponding increase in the use of nitrates and calcium- and magnesium-based fertilizers and soil additives in modern agricultural practices. The predominant direction of groundwater flow during historical and present-day conditions was from the eastern uplands in the Solomon Hills to the west along San Antonio Creek toward Barka Slough, and from the western uplands in the Casmalia Hills south to San Antonio Creek. The age of groundwater in the SACVW was evaluated using radioactive isotopes, and the flow of groundwater within the SACVW was evaluated using radioactive and stable isotopes. Modern groundwater (recharged after 1952) was generally found adjacent to San Antonio Creek and its tributaries in wells with perforated depths that averaged about 270 feet below land surface. Pre-modern groundwater (recharged before 1952) was found in wells that had average perforation depths of about 540 ft below land surface. Pre-modern groundwater identified in wells in the eastern upland area is interpreted to have had long, slow travel times to the western part of the SACVW where it was eventually discharged as base flow at Barka Slough or extracted as groundwater pumpage.

California↗