Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Natural Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66Linked to original sources
USGS2010

ATM Coastal Topography-Louisiana, 2001: UTM Zone 15 (Part 1 of 2)

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Louisiana coastline beach face within UTM Zone 15, from Isles Dernieres to Grand Isle, acquired September 7 and 10, 2001. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative scanning lidar instrument originally developed by NASA, and known as the Airborne Topographic Mapper (ATM), was used during data acquisition. The ATM system is a scanning lidar system that measures high-resolution topography of the land surface and incorporates a green-wavelength laser operating at pulse rates of 2 to 10 kilohertz. Measurements from the laser-ranging device are coupled with data acquired from inertial navigation system (INS) attitude sensors and differentially corrected global positioning system (GPS) receivers to measure topography of the surface at accuracies of +/-15 centimeters. The nominal ATM platform is a Twin Otter or P-3 Orion aircraft, but the instrument may be deployed on a range of light aircraft. Elevation measurements were collected over the survey area using the ATM system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first-surface topography.

Louisiana↗
USGS2014

Digital topographic data based on lidar survey of Mount Shasta Volcano, California, July-September 2010

The most voluminous of the Cascade volcanoes, northern California’s Mount Shasta, is a massive compound stratovolcano composed of at least four main edifices constructed over a period of at least 590,000 years. An ancestral Shasta volcano was destroyed by Earth’s largest known Quaternary subaerial debris avalanche, which filled Shasta Valley, northwest of the volcano. The Hotlum cone, forming the present summit, the Shastina lava dome complex, and the Black Butte lava dome on the southwest flank, were constructed during the early Holocene. As part of the American Recovery and Reinvestment Act (ARRA) of 2009, the U.S. Geological Survey was awarded funding for high-precision airborne lidar (light detection and ranging) data collection at several volcanoes in the Cascade Range. Data collection was arranged by the Oregon Lidar Consortium, administered by the Oregon Department of Geology and Mineral Industries (DOGAMI). The Oregon Lidar Consortium contracted with Watershed Sciences, Inc., to collect 1,220 square km of high-precision airborne lidar data. These data provide a digital map of the ground surface beneath forest cover with horizontal resolution of 1 m (average of 1.82 ground laser returns per square meter) and estimated vertical accuracy of ±4 centimeters (1 sigma), and horizontal accuracies of ±1.5 centimeters. These data will contribute to monitoring and description of natural hazards, the study of regional geology and volcanic landforms, and analysis of landscape modification during and after the next volcanic eruption at Mount Shasta. Survey Bounding Coordinates: West Bounding Coordinate: −122.438774 East Bounding Coordinate: −121.888382 North Bounding Coordinate: 41.564495 South Bounding Coordinate: 41.126339

California↗
USGS2013

U.S. Geological Survey science for the Wyoming Landscape Conservation Initiative: 2011 annual report

This is the fourth report produced by the U.S. Geological Survey (USGS) for the Wyoming Landscape Conservation Initiative (WLCI) to detail annual work activities. In FY2011, there were 37 ongoing, completed, or new projects conducted under the five major multi-disciplinary science and technical-assistance activities: (1) Baseline Synthesis, (2) Targeted Monitoring and Research, (3) Data and Information Management, (4) Integration and Coordination, and (5) Decisionmaking and Evaluation. The four new work activities were (1) development of the Western Energy Citation Clearinghouse, a Web-based energy-resource database of references for literature and on-line resources focused on energy development and its effects on natural resources; (2) a study to support the Sublette County Conservation District in ascertaining potential water-quality impacts to the New Fork River from energy development in the Pinedale Anticline Project Area; (3) a study to test the efficacy of blending high-frequency temporal data provided by Moderate Resolution Imaging Spectroradiometer (MODIS) sensors and high-resolution Landsat data for providing the fine-resolution data required to evaluate habitat responses to management activities at the landscape level; and (4) a study to examine the seasonal water chemistry of Muddy Creek, including documenting salinity patterns and providing a baseline for assessing potential effects of energy and other development on water quality in the Muddy Creek watershed. Two work activities were completed in FY2011: (1) the assessment of rancher perceptions of energy development in Southwest Wyoming and (2) mapping aspen stands and conifer encroachment using classification and regression tree (CART) analysis for effectiveness monitoring. The USGS continued to compile data, develop geospatial products, and upgrade Web-based products in support of both individual and overall WLCI efforts, including (1) ranking and prioritizing proposed conservation projects, (2) developing the WLCI integrated assessment, (3) developing the WLCI 5-year Conservation Action Plan, and (4) continuing to upgrade the content and improve the functionality of the WLCI Web site. For the WLCI FY2012 annual report, a decision was made to greatly reduce the overall length of the annual report, which will be accomplished by simplifying the report format and focusing on the take-home messages of each work activity for WLCI partners.

Wyoming↗
USGS2019

Assessment experimental semivariogram uncertainty in the presence of a polynomial drift

The semivariogram, which measures the spatial variability between experimental data, is generally used as a structural input in all two-point geostatistical procedures. However, in most geoscience applications, experimental semivariograms are usually computed from a limited number of sparsely spaced measurements, which results in uncertainty associated with the semivariance values estimated for a specified number of lags. More importantly, considering a spatial variable modelled by a nonstationary random field, uncertainty is not only in the experimental semivariogram of the residuals, but also in the coefficients of the drift model estimated from the available experimental data. Therefore, when assessing the reliability of an experimental semivariogram (or estimated semivariances) in the nonstationary case, both aforementioned uncertainties should be taken into account. The aim of this paper is to extend the “Generalised Bootstrap” procedure to the nonstationary model by propagating the uncertainty associated with the estimated drift coefficients into the uncertainty in the experimental semivariogram of the residuals. The proposed methodology is demonstrated in a case study using abundant geophysical measurements characterised by a nonstationary random function. Two scenarios are evaluated in the case study: (1) it is assumed that the drift coefficients can be estimated without any uncertainty, and (2) uncertainty of the drift coefficients is taken into account. We have explained the methodology that allows to assess the uncertainty of the semivariogram lag estimates in the presence of the drift in the mean. Considering the second scenario, uncertainty is obviously larger than the case where uncertainty of the drift in the mean is ignored. This evaluation should be considered in applications where the data is often rather limited, such as subsurface hydrology (i.e. porosity, transmissivity), soil science (i.e. heavy metal content, soil moisture) and mining (i.e. scoping or pre-feasibility stage of the project). In fact, modern geostatistics should provide not only the semivariogram estimates but also estimation of its uncertainty.

Natural Resources Research↗
USGS2001

In situ spectroscopic and solution analyses of the reductive dissolution of Mn02 by Fe(II)

The reductive dissolution of MnO 2 by Fe(II) under conditions simulating acid mine drainage (pH 3, 100 mM SO 4 2 - ) was investigated by utilizing a flow-through reaction cell and synchrotron X-ray absorption spectroscopy. This configuration allows collection of in situ, real-time X-ray absorption near-edge structure (XANES) spectra and bulk solution samples. Analysis of the solution chemistry suggests that the reaction mechanism changed (decreased reaction rate) as MnO 2 was reduced and Fe(III) precipitated, primarily as ferrihydrite. Simultaneously, we observed an additional phase, with the local structure of jacobsite (MnFe 2 O 4 ), in the Mn XANES spectra of reactants and products. The X-ray absorbance of this intermediate phase increased during the experiment, implying an increase in concentration. The presence of this phase, which probably formed as a surface coating, helps to explain the reduced rate of dissolution of manganese(IV) oxide. In natural environments affected by acid mine drainage, the formation of complex intermediate solid phases on mineral surfaces undergoing reductive dissolution may likewise influence the rate of release of metals to solution.

Environmental Science & Technology↗
USGS2007

The role of natural vegetative disturbance in determining stream reach characteristics in central Idaho and western Montana

We evaluated the relationship between natural vegetative disturbance and changes in stream habitat and macroinvertebrate metrics within 33 randomly selected minimally managed watersheds in central Idaho and western Montana. Changes in stream reach conditions were related to vegetative disturbance for the time periods from 1985 to 1993 and 1993 to 2000, respectively, at the following three spatial scales; within the stream buffer and less than 1 km from the evaluated reach, within the watershed and within 1 km of the stream reach, and within the watershed. Data for stream reaches were based on field surveys and vegetative disturbance was generated for the watershed above the sampled reach using remotely sensed data and geographical information systems. Large scale (>100 ha) vegetative disturbance was common within the study area. Even though natural vegetative disturbance rates were high, we found that few of the measured attributes were related to the magnitude of vegetative disturbance. The three physical habitat attributes that changed significantly were sinuosity, median particle size, and percentage of undercut bank; each was related to the disturbance in the earlier (1985-1993) time frame. There was a significant relationship between changes in two macroinvertebrate metrics, abundance and percent collectors/filterers, and the magnitude of disturbance during the more recent time period (1993-2000). We did not find a consistent relationship between the location of the disturbance within the watershed and changes in stream conditions. Our findings suggest that natural vegetative disturbance within the northern Rocky Mountains is complex but likely does not result in substantial short-term changes in the characteristics of most stream reaches. ?? 2007 by the Northwest Scientific Association. All rights reserved.

Idaho, Montana↗
USGS2009

ATM Coastal Topography - Louisiana, 2001: UTM Zone 16 (Part 2 of 2)

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Louisiana coastline beach face within UTM Zone 16, from Grand Isle to the Chandeleur Islands, acquired September 7 and 9, 2001. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative scanning lidar instrument originally developed by NASA, and known as the Airborne Topographic Mapper (ATM), was used during data acquisition. The ATM system is a scanning lidar system that measures high-resolution topography of the land surface and incorporates a green-wavelength laser operating at pulse rates of 2 to 10 kilohertz. Measurements from the laser-ranging device are coupled with data acquired from inertial navigation system (INS) attitude sensors and differentially corrected global positioning system (GPS) receivers to measure topography of the surface at accuracies of +/-15 centimeters. The nominal ATM platform is a Twin Otter or P-3 Orion aircraft, but the instrument may be deployed on a range of light aircraft. Elevation measurements were collected over the survey area using the ATM system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first-surface topography.

Louisiana↗
USGS2007

Remotely Sensed Data Collections: Offerings from EROS

The U.S. Geological Survey (USGS) Center for Earth Resources Observation and Science (EROS) maintains a wide variety of remotely sensed data collections that contain a wealth of information about the Earth’s land surfaces. Acquired by special sensors carried aboard civilian satellites and aircraft, the images and other data in these collections provide a unique perspective of the terrestrial environment. They represent invaluable resources for scientists, resource managers, policy makers, and educators to use in studying such things as natural hazards, conservation issues, land use and economic development, and environmental change at local, regional, and global levels. Different types of sensors record different types of information, resulting in diverse data products, each with its own particular strengths. Highlighted here are eight remotely sensed data collections that are currently available from EROS.

Fact Sheet↗
USGS1993

Research, conservation, and collaboration: The role of visiting scientists in developing countries

As awareness of environmental problems and the need to protect our natural resources or use them wisely has grown, scientists have become increasingly interested in conservation. Some individuals are involved in conservation-related activities through research or teaching, but most of us participate only as citizens concerned about the world in which we live. Often, we decline to take an active role in conservation issues because we think that "it will take too much time away from our science," or that it is "too much trouble." Both perspectives, I think, are inaccurate. Sometimes investigators fail to participate because they are ignorant of the ways in which scientists (or scientific organizations) interface with conservation - in other words, of how one goes about getting personally involved. Whatever the reason, this lack of involvement is unfortunate, because scientists, and especially "whole organism" biologists (including ornithologists), can make unique contributions to conservation programs, as scientists , without a significant increase in effort or any change in the quality of their work. At the same time, they reap both professional and personal rewards.

The Auk↗
USGS2013

Summary of science, activities, programs, and policies that influence the rangewide conservation of Greater Sage-Grouse (Centrocercus urophasianus)

The Greater Sage-Grouse, has been observed, hunted, and counted for decades. The sagebrush biome, home to the Greater Sage-Grouse, includes sagebrush-steppe and Great Basin sagebrush communities, interspersed with grasslands, salt flats, badlands, mountain ranges, springs, intermittent creeks and washes, and major river systems, and is one of the most widespread and enigmatic components of Western U.S. landscapes. Over time, habitat conversion, degradation, and fragmentation have accumulated across the entire range such that local conditions as well as habitat distributions at local and regional scales are negatively affecting the long-term persistence of this species. Historic patterns of human use and settlement of the sagebrush ecosystem have contributed to the current condition and status of sage-grouse populations. The accumulation of habitat loss, persistent habitat degradation, and fragmentation by industry and urban infrastructure, as indicated by U.S. Fish and Wildlife Service (USFWS) findings, presents a significant challenge for conservation of this species and sustainable management of the sagebrush ecosystem. Because of the wide variations in natural and human history across these landscapes, no single prescription for management of sagebrush ecosystems (including sage-grouse habitats) will suffice to guide the collective efforts of public and private entities to conserve the species and its habitat. This report documents and summarizes several decades of work on sage-grouse populations, sagebrush as habitat, and sagebrush community and ecosystem functions based on the recent assessment and findings of the USFWS under consideration of the Endangered Species Act. As reflected here, some of these topics receive a greater depth of discussion because of the perceived importance of the issue for sagebrush ecosystems and sage-grouse populations. Drawing connections between the direct effects on sagebrush ecosystems and the effect of ecosystem condition on habitat condition, and finally the connection between habitat quality and sage-grouse population dynamics remains an important goal for science, management, and conservation. This effort is necessary, despite the perception that these complicated, indirect relations are difficult to characterize and manage, and the many advances in understanding and application developed toward this end have been documented here to help inform regional planning and policy decisions.

Arizona;California;Colorado;Montana;Nebraska;Nevad↗
USGS2001

A model for lignin alteration - Part II: Numerical model of natural gas generation and application to the Piceance Basin, Western Colorado

The model presented here simulates a network of parallel and sequential reactions that describe the structural and chemical transformation of lignin-derived sedimentary organic matter (SOM) and the resulting generation of mobile species from shallow burial to approximately low-volatile bituminous rank. The model is calibrated to the Upper Cretaceous Williams Fork Formation coal of the Piceance Basin at the Multi-Well Experiment (MWX) Site, assuming this coal is largely derived from lignin. The model calculates the content of functional groups on the residual molecular species, C, H, and O elemental weight percents of the residual species, and moles of residual molecular species and mobile species (including components of natural gas) through time. The model is generally more sensitive to initial molecular structure of the lignin-derived molecule and the H2O content of the system than to initial temperature, as the former affect the fundamental reaction paths. The model is used to estimate that a total of 314 trillion cubic feet (tcf) of methane is generated by the Williams Fork coal over the basin history. ?? 2001 Elsevier Science Ltd. All rights reserved.

Organic Geochemistry↗
USGS2021

Discrete sample introduction module for quantitative and isotopic analysis of methane and other gases by cavity ring-down spectroscopy

Carbon dioxide (CO 2 ) and methane (CH 4 ) are natural and anthropogenic products that play a central role in the global carbon cycle and regulating Earth’s climate. Applications utilizing laser absorption spectroscopy, which continuously measure concentrations and stable isotope ratios of these greenhouse gases, are routinely employed to measure the source and magnitude of atmospheric inputs. We developed a discrete sample introduction module (DSIM) to enable measurements of methane and CO 2 concentrations and δ 13 C values from limited volume (5–100 mL) gas samples when interfaced with a commercially available cavity ring-down spectroscopy (CRDS) analyzer. The analysis has a dynamic range that spans six orders of magnitude from 100% analyte to the lower limit of instrument detection (2 ppm). We demonstrate system performance for methane by comparing concentrations and δ 13 C results from the DSIM-CRDS system and traditional methods for a variety of sample types, including low concentration (nanomolar CH 4 ) seawater and high concentration (>90% CH 4 ) natural gas. The expansive concentration range of the field-portable DSIM-CRDS system can measure enhances analytical performance for investigating methane and CO 2 dynamics and, potentially, other gases measured by laser absorption spectroscopy.

Environmental Science & Technology↗
USGS2004

Stable metal isotopes reveal copper accumulation and loss dynamics in the freshwater bivalve Corbucula

Characterization of uptake and loss dynamics is critical to understanding risks associated with contaminant exposure in aquatic animals. Dynamics are especially important in addressing questions such as why coexisting species in nature accumulate different levels of a contaminant. Here we manipulated copper (Cu) stable isotopic ratios (as an alternative to radioisotopes) to describe for the first time Cu dynamics in a freshwater invertebrate, the bivalve Corbicula fluminea . In the laboratory, Corbicula uptake and loss rate constants were determined from an environmentally realistic waterborne exposure to 65 Cu (5.7 μg L - 1 ). That is, we spiked deionized water with Cu that was 99.4% 65 Cu. Net tracer uptake was detectable after 1 day and strongly evident after 4 days. Thus, short-term exposures necessary to determine uptake dynamics are feasible with stable isotopes of Cu. In Corbicula , 65 Cu depuration was biphasic. An unusually low rate constant of loss (0.0038 d - 1 ) characterized the slow component of efflux, explaining why Corbicula strongly accumulates copper in nature. We incorporated our estimates of rate constants for dissolved 65 Cu uptake and physiological efflux into a bioaccumulation model and showed that dietary exposure to Cu is likely an important bioaccumulation pathway for Corbicula .

Environmental Science & Technology↗
USGS2010

Isotopic composition and origin of indigenous natural perchlorate and co-occurring nitrate in the southwestern United States

Perchlorate (ClO 4 − ) has been detected widely in groundwater and soils of the southwestern United States. Much of this ClO 4 − appears to be natural, and it may have accumulated largely through wet and dry atmospheric deposition. This study evaluates the isotopic composition of natural ClO 4 − indigenous to the southwestern U.S. Stable isotope ratios were measured in ClO 4 − (δ 18 O, Δ 17 O, δ 37 Cl) and associated NO 3 − (δ 18 O, Δ 17 O, δ 15 N) in groundwater from the southern High Plains (SHP) of Texas and New Mexico and the Middle Rio Grande Basin (MRGB) in New Mexico, from unsaturated subsoil in the SHP, and from NO 3 − -rich surface caliche deposits near Death Valley, California. The data indicate natural ClO 4 − in the southwestern U.S. has a wide range of isotopic compositions that are distinct from those reported previously for natural ClO 4 − from the Atacama Desert of Chile as well as all known synthetic ClO 4 − . ClO 4 − in Death Valley caliche has a range of high Δ 17 O values (+8.6 to +18.4 ‰), overlapping and extending the Atacama range, indicating at least partial atmospheric formation via reaction with ozone (O 3 ). However, the Death Valley δ 37 Cl values (−3.1 to −0.8 ‰) and δ 18 O values (+2.9 to +26.1‰) are higher than those of Atacama ClO 4 − . In contrast, ClO 4 − from western Texas and New Mexico has much lower Δ 17 O (+0.3 to +1.3‰), with relatively high δ 37 Cl (+3.4 to +5.1 ‰) and δ 18 O (+0.5 to +4.8 ‰), indicating either that this material was not primarily generated with O 3 as a reactant or that the ClO 4 − was affected by postdepositional O isotope exchange. High Δ 17 O values in ClO 4 − (Atacama and Death Valley) are associated with high Δ 17 O values in NO 3 − , indicating that both compounds preserve characteristics of O 3 -related atmospheric production in hyper-arid settings, whereas both compounds have low Δ 17 O values in less arid settings. Although Δ 17 O variations in terrestrial NO 3 − can be attributed to mixing of atmospheric (high Δ 17 O) and biogenic (low Δ 17 O) NO 3 − , variations in Δ 17 O of terrestrial ClO 4 − are not readily explained in the same way. This study provides important new constraints for identifying natural sources of ClO 4 − in different environments by multicomponent isotopic characteristics, while presenting the possibilities of divergent ClO 4 − formation mechanisms and(or) ClO 4 − isotopic exchange in biologically active environments.

Environmental Science & Technology↗
USGS2009

EAARL Coastal Topography - Northern Gulf of Mexico, 2007: First surface

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) elevation data were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. The project provides highly detailed and accurate datasets of select barrier islands and peninsular regions of Louisiana, Mississippi, Alabama, and Florida, acquired June 27-30, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Alabama, Mississippi↗
USGS2009

EAARL Coastal Topography-Assateague Island National Seashore, 2008: First Surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Assateague Island National Seashore in Maryland and Virginia, acquired March 24-25, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for pre-survey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗
USGS2009

EAARL Coastal Topography-Assateague Island National Seashore, 2008: Bare Earth

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Assateague Island National Seashore in Maryland and Virginia, acquired March 24-25, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL) was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for pre-survey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗