Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Interpretation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66Linked to original sources

Geology of the Harper Quadrangle, Liberia

As part of a program undertaken cooperatively by the Liberian Geological Survey (LGS) and the U. S. Geological Survey (USGS), under the sponsorship of the Government of Liberia and the Agency for International Development, U. S. Department of State, Liberia was mapped by geologic and geophysical methods during the period 1965 to 1972. The resulting geologic and geophysical maps are published in ten folios, each covering one quadrangle (see index map). The first systematic mapping in the Harper quadrangle was by Baker, S. P. Srivastava, and W. E. Stewart (LGS) at a scale of 1:500,000 in the vicinity of Harper in the southeastern, and of Karloke in the northeastern part of the quadrangle in 1960-61. Brock and Chidester carried out systematic mapping of the quadrangle at a scale of 1:250,000 in the period September 1971-May 1972; the geologic map was compiled from field data gathered by project geologists and private companies as indicated in the source diagram, photogeologic maps, interpretation of airborne magnetic and radiometric surveys, field mapping, and ground-based radiometric surveys in which hand-held scintillators were used. R. W. Bromery, C. S. Wotorson, and J. C. Behrendt contributed to the interpretation of geophysical data. Total-intensity aeromagnetic and total-count gamma radiation maps (Behrendt and Wotorson, in press a, b), and unpublished data derived from those maps, including the near-surface and the regional magnetic components and aeromagnetic/radiometric correlations, were used in the interpretation.

Harper Quadrangle↗

Chemical analyses (raw laboratory data) and locality index maps of the Confederate Gulch area, Broadwater and Meagher Counties, Montana

Analysis of the side looking airborn radar imagery of Massachusetts, Connecticut and Rhode Island indicates that radar shows the topography in great detail. Since bedrock geologic features are frequently expressed in the topography the radar lends itself to geologic interpretation. The radar was studied by comparisons with field mapped geologic data first at a scale of approximately 1:125,000 and then at a scale of 1:500,000. The larger scale comparison revealed that faults, minor faults, joint sets, bedding and foliation attitudes, lithology and lithologic contacts all have a topographic expression interpretable on the imagery. Surficial geologic features were far less visible on the imagery over most of the area studied. The smaller scale comparisons revealed a pervasive, near orthogonal fracture set cutting all types and ages of rock and trending roughly N40?E and N30?W. In certain places the strike of bedding and foliation attitudes and some lithologic Contacts were visible in addition to the fractures. Fracturing in southern New England is apparently far more important than has been previously recognized. This new information, together with the visibility of many bedding and foliation attitudes and lithologic contacts, indicates the importance of radar imagery in improving the geologic interpretation of an area.

Montana↗

Use of USGS earth science products by city planning agencies in the San Francisco Bay region, California

An inventory of the use of USGS products in selected planning studies, plans, plan implementation devices, and other planning-related activities was completed for the ninety-one cities in the nine-county San Francisco Bay region. This inventory was designed to determine and document the use of the 85 earth science products prepared as a part of the San Francisco Bay Region Environment and Resources Planning Study (SFBRS). This inventory showed that: (1) three-fourths of the cities had planning staffs who were familiar with SFBRS products, or had made use of such products; (2) over half of the cities had prepared planning documents which contained references to SFBRS products; (3) the types of planning applications most often indicated were: geologic hazards studies; seismic safety, public safety, conservation, and open-space plan elements; general reference; and the preparation and review of environmental impact reports and statements; (4) almost 90 percent of all 85 SFBRS products were used at least once for a city planning activity, and one product was used at least 67 times for various city planning activities; and (5) at least forty-five other other USGS products were also used for various city planning activities. All of the seven SFBRS products that were used 30 or more times for city planning activities were small-scale, large-areal-coverage, hazard-type products. Each product is interpretative and contains additional data which makes it more relevant or more interesting. The planning staffs of each city were also interviewed and asked to indicate any problems in the use of the SFBRS products, to recommend improvements, and to identify any needed or desired earth science data. The responses showed that: (1) the map scales commonly used by cities were much larger than 1:12,000; (2) few cities had planning staffs with training or experience in the earth sciences or engineering; (3) less than one-fourth of the cities failed to use SFBRS products-primarily because their staffs were unaware of the SFBRS, unfamiliar with its products, or lacked adequate capability; (4) almost two-thirds of the cities expressed some problems in using the products-primarily scale and detail; (5) over two-thirds of the cities expressed an interest in continuing to use, or planning to use, the SFBRS products in the future, and a need or desire for additional earth science, engineering or other data; and (6) over one-half of the cities suggested improvements-primarily larger scale or more detail and less technical or more interpretative products. From the inventory and responses to the interviews, it is concluded that the cities in the Bay region have considerable familiarity with, and have made substantial use of, SFBRS products. This use was made by many cities despite their small size, limited staff capability, and the design of the products which was intended primarily for regional planning at a regional scale. Suggestions are made to ensure more familiarity with, and more effective use of, earth science data in the future. These suggestions include: (1) providing engineering interpretations and land-use capability ratings to make earth science data more readily usable; (2) monitoring and analyzing new state laws and regulations to better anticipate and respond to local earth science data needs; (3) including technical assistance with any earth science data designed for planners and decision-makers; (4) providing larger scale and greater detail earth science data on a demonstration basis; (5) giving priority to urban and urbanizing areas so as to conserve limited staff resources; and (6) ensuring product distribution to all potential users.

California↗

Paleomagnetism of the Plio-Pleistocene sediments of Lake Tecopa, California, and East Rudolf, Kenya; magnetic stratigraphy and polarity transitions

High resolution paleomagnetic records were obtained from Plio-Pleistocene lake deposits in California and Kenya. The objectives of this research were correlation of the stratigraphic sections with the geomagnetic reversal time scale and measurement of the magnetic changes which occur during polarity transitions. In addition, the properties of reliable and unreliable paleomagnetic sediments were investigated. The Brunhes-Matuyama reversal boundary (700,000 years B.P.) was located in the deposits of Lake Tecopa. A detailed study of this polarity transition gave the .following results: 1). .During the transitions the intensity of the field in the southwestern U.S. dropped to a minimum of 10 percent of the intensity after the transition. 2). Intervals of low field intensity preceded and followed the interval during which the field direction reversed, the latter being shorter than the interval of low intensity by a factor of at least 2.5. 3). Pole paths for the Brunhes-Matuyama transition observed in Japan and California are completely different, indicating that the dipole field decayed. The transition field appears to be essentially the non-dipole field. 4). The transitional field may be a stationary non-dipole field, but one which is different during different transitions.. The small amount of drift during polarity transitions may reflect loss of core mantle induction coupling, which is usually provided by the dipole field. Paleomagnetic stratigraphy was determined from the archaeological sites at Lake Rudolf; however, the dating of these deposits remains ambiguous. Two interpretations have been proposed. In the first . xi interpretation the age of the lower member of the Koobi Fora Formation is 2..6 - 3.7 m.y.; whereas, in the second interpretation the age is 1.6 - 3.1 m.y. Studies of rock magnetism showed that in the deposits of both lakes the magnetic remanence is carried by grains of oxidized titano-magnetite, most with diameters ranging between 1 and 100 microns. At Lake Tecopa the least reliable paleomagnetic results were found in sediments which had undergone diagenesis in a highly oxidizing environment. In a comparison of magnetically stable and unstable specimens from Lake Rudolf, it was found that stability depended on grain size. Stable magnetic behavior was observed in sediments in which the bulk of the magnetic grains had diameters of less than 20 microns. Specimen: which contained large proportions of grains with diameters greater than 50 microns tended to be unstable.

California↗

Use of U.S. Geological Survey earth-science products by selected regional agencies in the San Francisco Bay region, California

An inventory of the use of U.S. Geological Survey (USGS) products in studies, plans, implementation, and other planning activities was made for seven selected regional agencies in the San Francisco Bay region -- a region of over five million people. This inventory was designed to determine and document the use of over 100 earth-science products prepared as a part of the San Francisco Bay Region Environment and Resources Planning Study (SFBRS). The inventory showed that: (1) all seven agencies have staff members who are familiar with SFBRS products and make frequent use of them; (2) all seven agencies have prepared planning documents citing SFBRS products; (3) the types of planning applications most often indicated were water-quality and physical resources studies, potential site evaluation, and general reference; (4) almost 80 percent of the over 100 SFBRS products were used at least once, and eleven of the products were used 20 or more times each for various regional planning activities; and (5) at least 46 other USGS products were also used for various regional planning activities. During the inventory, over 50 regional agency. officials, employees, and consultants were interviewed and asked -- among other things -- to indicate any problems they had noted in the use of the SFBRS products, to suggest improvements, and to identify any additional earth-science information needed or desired. The responses showed that: (1) the scales commonly used for "work" maps were 1:62,500 or larger, and for "implementation" maps were 1:24,000 or larger; (2) two agencies have a geologist on their planning staff, others have staff members with training or experience in earth-science or engineering, and all had the benefit of geotechnical services from outside their agency; (3) all seven agencies experienced some problems in using the products, primarily because the scale was too small or the detail not great enough; (4) all seven agencies expressed interest in the topical interpretive reports in preparation and a need or desire for additional earth-science, engineering, or other related information; (5) six of the seven agencies suggested specific improvements to future products -- primarily larger scale or more detail and less technical or more interpretive information; and (6) all seven agencies received educational, advisory or review services from USGS personnel. Fifteen selected examples of the application of SFBRS products to various regional planning activities are discussed and illustrated. These examples include six planning studies, five plans, two implementation activities, and two other types of activities. From the inventory and responses to the interviews, it is concluded that the selected regional agencies in the bay region are familiar with, make frequent use of, and will continue to use SFBRS products for a wide range of regional planning activities. Suggestions to ensure more effective use of earth-science information in the future include: (1) monitoring and analyzing new State and Federal laws or regulations and emerging critical issues so as to anticipate and respond to regional earth-science information needs; (2) creating a users advisory committee to help identify critical issues and needs; (3) providing engineering interpretations and land- and water-use capability ratings to make earth-science information more readily usable; (4) giving priority to areas impacted by development; (5) providing earth-science information at the larger scale and greater detail commonly used and needed by regional agencies; (6) releasing earth-science information faster and according to a formal distribution pattern; and (7) providing educational, advisory, and review services in connection with any earth-science information designed for planners and decisionmakers.

California↗

Analysis of borehole geophysical data in an evaporite sequence at Salt Valley, Utah

Interpretation of the lithology of an interbed sequence (thin-bedded sediments between thick layers of salt) is often difficult due to the presence of dolomitic sandstones and halite inclusions. The most useful well logging measurements in an evaporite sequence are gamma-ray, neutron-neutron, density, and acoustic velocity. The high resistivity of salt and the low resistivity of commonly used drilling fluids (brine muds) make it difficult to obtain measurements of electrical properties in an evaporite sequence. Tests of a single-coil induction probe at Salt Valley show good resolution of the interbed lithologies and may be useful in determining moisture in the halite. Complex structural features (faulting and folding) are difficult to interpret with individual well logs. Interpretation of complex folding can be aided by plotting the percent frequency of occurrence of well log response values for the interbeds. Limbs of a fold that intersect the drill hole at different dip angles yield similar distribution patterns on these percent-frequency plots.

Utah↗

Hole-to-surface resistivity measurements at Salt Valley, Utah

Evaporites are an important potential medium for the storage of radioactive wastes. In order to ascertain the viability of a proposed waste isolation site, it is necessary to study its geology without extensive drilling that might destroy its structural integrity. Hole-to-surface and hole-to-hole geophysical measurements can be useful in supplementing geologic data obtained from a few drill holes and can be used to aid the interpretation of surface geophysical measurements. The study presented in this paper was conducted at Salt Valley, Utah to test the feasibility of using hole-to-surface direct-current resistivity measurements to detect geologic inhomogeneities in evaporites. These measurements show the following: (1) It is feasible to make hole-to-surface resistivity measurements over evaporites. However, near-surface steel casing can make it difficult to quantitatively analyze the field data with present interpretation techniques. Future investigations should include theoretical studies to solve interpretation problems when steel casing is in the hole and the mud is a high-conductivity brine. (2) A comparison of measurements made from the three different source drill holes shows that the halite acts as an electrical insulator and most of the current emitted from the source is contained in the caprock. (3) A comparison of measurements made parallel and perpendicular to the valley walls shows that there are more variations in the halitecaprock interface perpendicular than parallel to the axis of the Salt Valley anticline. (4) Structurally complex interbeds within the salt may cause differences in the current distribution measured at the surface from current sources buried at different depths. (5) Total field mapping would be more useful than the single-component data that were collected in this study.

Utah↗

Hole-to-surface resistivity measurements at Gibson Dome (drill hole GD-1) Paradox basin, Utah

Hole-to-surface resistivity measurements were made in a deep drill hole (GD-1), in San Juan County, Utah, which penetrated a sequence of sandstone, shale, and evaporite. These measurements were made as part of a larger investigation to study the suitability of an area centered around the Gibson Dome structure for nuclear waste disposal. The magnitude and direction of the total electric field resulting from a current source placed in a drill hole is calculated from potential difference measurements for a grid of closely-spaced stations. A contour map of these data provides a detailed map of the distribution of the electric field away from the drill hole. Computation of the apparent resistivity from the total electric field helps to interpret the data with respect to the ideal situation of a layered earth. Repeating the surface measurements for different source depths gives an indication of variations in the geoelectric section with depth. The quantitative interpretation of the field data at Gibson Dome was hindered by the pressure of a conductive borehole fluid. However, a qualitative interpretation of the field data indicates the geoelectric section around drill hole GD-1 is not perfectly layered. The geoelectric section appears to dip to the northwest, and contains anomalies in the resistivity distribution that may be representative of localized thickening or folding of the salt layers.

Open-File Report↗

Sedimentology of the lower part of the upper Triassic Chinle Formation and its relationship to uranium deposits, White Canyon area, southeastern Utah

Closely spaced measured stratigraphic sections of the lower part of the Late Triassic Chinle Formation in the White Canyon area of southeastern Utah depict a fluvial-deltaic-lacustrine depositional sequence that hosts uranium deposits in basal fluvial sandstones. The basal Shinarump Member consists of predominantly trough-crossbedded, coarse-grained sandstone and minor gray, carbonaceous mudstone and is interpreted as a valley-fill sequence overlain by deposits of a braided stream system. The overlying Monitor Butte Member is composed of cyclic- and foreset-bedded siltstone, sandstone, and mudstone and is interpreted as a succession of low-energy fluvial, deltaic and orqanicrich, lacustrine-marsh sediments. The overlying Moss Back Member is composed of a laterally extensive, coarse- to medium-grained, conglomeratic sandstone and is interpreted as a braided-stream system that flowed north to northwest. The entire sequence was deposited in response to changes in local base level associated with a large lake that lay to the west. Isopachs of lithofacies indicate distinct lacustrine basins and a correspondence between these facies and modern structural synclines. Facies changes and coincidence of isopach thicks suggest that structural synclines were active in the Late Triassic and influenced the pattern of sediment distribution within the basins. Uranium mineralization appears to be related to certain low-energy depositional environments in that uranium is localized in fluvial sandstones that lie beneath organic-rich lacustrine-marsh mudstones and carbonaceous delta-front sediments. The reducing environment preserved in these facies may have played an important role in the localization of uranium.

Utah↗

Time series analysis of Cenozoic era sea level and paleotemperature data

A statistical analysis of Cenozoic era sea level and paleotemperature data was performed to determine the cycles of each data set and the correspondence between them. Accordingly, each of the four time series were first analyzed independently in the univariate mode of a spectral analysis. The two basic data sets were then analyzed in a paired cross-spectral analysis. The prominent periodic cycles remaining in the data sets after linear trend removal, were: sea level surface from seismic stratigraphy--9.6 million years, updated version of sea level surface from seismic stratigraphy--9.5 million years, continental paleotemperatures from paleobotanical interpretations--9.6 million years, and marine paleotemperatures from foraminiferal isotopic data--12.7 million years. The cross-correlation properties between the data sets of continental paleotemperatures from paleobotanical interpretations and sea level surface from seismic stratigraphy at the common prominent period of 9.6 million years were: (1) The squared coherency value which measures cross correlation between the two data sets has the value 0.30, and (2) the amount by which the continental paleotemperatures from paleobotanical interpretations data lags the sea level surface from seismic stratigraphy data is 2.70 million years.

Open-File Report↗

Principles for selecting earthquake motions in engineering design of large dams

This report gives a synopsis of the various tools and techniques used in selecting earthquake ground motion parameters for large dams. It presents 18 charts giving newly developed relations for acceleration, velocity, and duration versus site earthquake intensity for near- and far-field hard and soft sites and earthquakes having magnitudes above and below 7. The material for this report is based on procedures developed at the Waterways Experiment Station. Although these procedures are suggested primarily for large dams, they may also be applicable for other facilities. Because no standard procedure exists for selecting earthquake motions in engineering design of large dams, a number of precautions are presented to guide users. The selection of earthquake motions is dependent on which one of two types of engineering analyses are performed. A pseudostatic analysis uses a coefficient usually obtained from an appropriate contour map; whereas, a dynamic analysis uses either accelerograms assigned to a site or specified respunse spectra. Each type of analysis requires significantly different input motions. All selections of design motions must allow for the lack of representative strong motion records, especially near-field motions from earthquakes of magnitude 7 and greater, as well as an enormous spread in the available data. Limited data must be projected and its spread bracketed in order to fill in the gaps and to assure that there will be no surprises. Because each site may have differing special characteristics in its geology, seismic history, attenuation, recurrence, interpreted maximum events, etc., as integrated approach gives best results. Each part of the site investigation requires a number of decisions. In some cases, the decision to use a 'least ork' approach may be suitable, simply assuming the worst of several possibilities and testing for it. Because there are no standard procedures to follow, multiple approaches are useful. For example, peak motions at a site may be obtained from several methods that involve magnitude of earthquake, distance from source, and corresponding motions; or, alternately, peak motions may be assigned from other correlations based on earthquake intensity. Various interpretations exist to account for duration, recurrence, effects of site conditions, etc. Comparison of the various interpretations can be very useful. Probabilities can be assigned; however, they can present very serious problems unless appropriate care is taken when data are extrapolated beyond their data base. In making deterministic judgments, probabilistic data can provide useful guidance in estimating the uncertainties of the decision. The selection of a design ground motion for large dams is based in the end on subjective judgments which should depend, to an important extent, on the consequences of failure. Usually, use of a design value of ground motion representing a mean plus one standard deviation of possible variation in the mean of the data puts one in a conservative position. If failure presents no hazard to life, lower values of design ground motion may be justified, providing there are cost benefits and the risk is acceptable to the owner. Where a large hazard to life exists (i.e., a dam above an urbanized area) one may wish to use values of design ground motion that approximate the very worst case. The selection of a design ground motion must be appropriate for its particular set of circumstances.

Open-File Report↗

Crustal structure of southwestern Saudi Arabia

The southwestern Arabian Shield is composed of uplifted Proterozoic metamorphic and plutonic rocks. The Shield is bordered on the southwest by Cenozoic sedimentary and igneous rocks of the Red Sea paar and on the east by the Arabian Platform, an area of basin sedimentation throughout Phanerozoic time. The Shield appears to have been formed by successive episodes of island arc volcanism and sea-floor spreading, followed by several cycles of compressive tectonism and metamorphism. An interpretation and synthesis of a deep-refraction seismic profile from the Riyadh area to the Farasan Islands, and regional gravity, aeromagnetic, heat flow, and surface geologic data have yielded a self-consistent regional-scale model of the crust and upper mantle for this area. The model consists of two 20 km-thick layers of crust with an average compressional wave velocity in the upper crust of about 6.3 km/s and an average velocity in the lower. crust of about 7.0 km/s. This crust thins abruptly to less than 20 km near the southwestern end of the profile where Precambrian outcrops abut the Cenozoic rocks and to 8 km beneath the Farasan Islands. The data over the coastal plain and Red Sea shelf areas are fit satisfactorily by an oceanic crustal model. A major lateral velocity inhomogeneity in the crust is inferred about 25 km northeast of Sabhah and is supported by surface geologic evidence. The major velocity discontinuities occur at about the same depth across the entire Shield and are interpreted to indicate horizontal metamorphic stratification of the Precambrian crust. Several lateral inhomogenities in both the upper and lower .crust of the . Shield are interpreted, to indicate bulk compositional variations. The subcrustal portion of the model is composed of a hot, low-density lithosphere beneath the Red Sea which is systematically cooler and denser to the northeast. This model provides a mechanism which explains the observed topographic uplift, regional gravity pattern, heat flow, and mantle compressional wave velocities. Such a lithosphere could be produced by upwelling of hot asthenosphere beneath the Red Sea which then flows laterally beneath the lithosphere of the Arabian Plate.

Open-File Report↗

Common-depth-point seismic-reflection survey on the Mississippi River in the vicinity of Alton, Illinois

A high-resolution seismic-reflection survey was run on the Mississippi River using marine common-depth-point (CDP), digital, and multichannel techniques in an attempt to locate a possible fault that had been interpreted by others from magnetic and land seismic data to be in the vicinity of Lock and Dam No. 26. The geologic feature is commonly known in the literature as the Cap au Ores Fault or Cap au Ores Uplift. A second objective was to demonstrate that the marine seismic system could be used successfully for making relatively deep penetration seismic-reflection surveys on inland waterways with shallow water depths (less than 10 meters) and organic sediments on the waterway bottom. The survey was made by agreement between the U.S. Army Corps of Engineers (COE), St. Louis District, and the U.S. Geological Survey (USGS). The USGS used a specially equipped, trailerable, 38-ft aluminum boat for the work. The quality of the survey records can be classified as from fair to good. Seismic-reflection events could be interpreted in the upper 200 ms of data. Five reflecting horizons with little slope were recorded between Mississippi River Miles 195 and 210 without any evidence of faulting of the magnitude (50 to 100 m) suggested by the Shannon and Wilson report (1980). Minor faulting and buried channeling could be interpreted. This survey demonstrated the value and economy of obtaining deeper penetration seismic data on inland water using an offshore marine, CDP, digital, multichannel seismic-reflection system. On-going modifications in field procedure, equipment configuration, equipment, and data processing will further improve the results obtained with such equipment. Future marine-style surveys conducted with the newly available hydraulic waterguns (80-, 200-, and 400-in 3 ) would probably produce data that are a significant improvement over data obtained with the 15-in 3 pneumatic watergun and 40-in 3 airgun used during the 1980 survey.

Illinois, Missouri↗

Water resources activities in Louisiana district, fiscal year 1985

Water resources activities of the U.S. Geological Survey (USGS) in Louisiana consist of collecting water resources data and conducting interpretive hydrologic investigations and research. The water resources data and the results of the interpretive investigations are published or released by either the USGS or by cooperating agencies. The USGS water resources activities in Louisiana for the 1985 fiscal year (October 1, 1984 to September 30, 1985) are described, including data collection and dissemination, water resources appraisals (interpretive studies) and research. (Lantz-PTT)

Open-File Report↗

Map of Western Copper River Basin, Alaska, Showing Lake Sediments and Shorelines, Glacial Moraines, and Location of Stratigraphic Sections and Radiocarbon-Dated Samples

The purpose of this report is to make available basic data on radiocarbon dating of 61 organic samples from 40 locations in the western Copper River Basin and adjacent uplands and in the uppermost Matanuska River Valley. The former distribution of late Quaternary glacial lakes and of glaciers as mapped from field work and photo interpretation is provided as background for interpretation of the radiocarbon dates and are the basic data needed for construction of the late Quaternary chronology. The glacial boundaries, formed and expressed by moraines, ice-contact margins, marginal channels, deltas, and other features, are obscured by a drape of glaciolacustrine deposits in a series of glacial lakes. The highest lake, represented by bottom sediments as high as 914 m to 975 m above sea level, extends from Fog Lakes lowland on Susitna River upstream into the northwestern part of the Copper River Basin (the part now draining to Susitna River) where it apparently was held in by an ice border. It was apparently dammed by ice from the Mt. McKinley area, by Talkeetna G1acier, and may have had a temporary drainage threshold at the headwaters of Chunilna Creek. No shorelines have been noted within the map area, although Nichols and Yehle (1961) reported shorelines within the 914-975 m range in the Denali area to the north of that mapped. Recent work by geologic consultants for the Susitna Hydroelectric Project has confirmed the early inferences (Karlstrom, 1964) about the existence of a lake in the Susitna canyon, based originally on drilling by the Bureau of Reclamation about 35 years ago. According to dating of deposits at Tyone Bluff (map locations 0, P), Thorson and others (1981) concluded that a late Wisconsin advance of the glaciers between 11,535 and 21,730 years ago was followed by a brief interval of lacustrine sedimentation, and was preceded by a long period of lake deposition broken by a lowering of the lake between 32,000 and about 25,000 years ago. An alternate interpretation of the late Wisconsin till at Tyone Bluff is that it is a glaciolacustrine diamicton of the 914-975 m lake into which the ice advanced to the Hatchet Lake and to the Old Man moraines. The level of this regional lake in the Susitna drainage and on Heartland Ridge then dropped from over 914 m to about 777 m, to uncover the Tyone Spillway. An intermediate lake level in the Susitna-Tyone-Louise lake region was lowered rapidly by erosion of the spillway to 747 m. The drainage of the 747 m lake was concentrated in the spillway leading west from the West Fork Gulkana River. This spillway or a rock threshold downstream apparently was stable enough to permit formation of basin-wide, apparently undeformed, shoreline systems at 747 m, and, on recession, local shorelines at 717 m and 700 m and lower levels. The level of the 747 m lake that was confined to about 9000 km2 of the present Copper River Basin fluctuated for one or more reasons such as: the volume of ice added to or withdrawn from the system, because of changes in water budget (assuming no outflow), and/or because of temporary releases through the only outlets, perhaps Mentasta Pass, but importantly, the Copper River canyon. The 747 m lake persisted until glaciers had withdrawn to well within the Chugach Mountains, perhaps 10 to 20 km from the present glaciers.

Open-File Report↗

Water-resources activities in New England, fiscal year 1993

The U.S. Geological Survey has 82 active or complete-except-report projects of hydrologic investigations ongoing within the New England Program Area. Of this total, 23 are data projects. Data projects contain statistics and data on the conditions of surface water, ground water, water quality and (or) water use for the study area. There currently are six data projects in Connecticut, five in Maine, four in Massachusetts, four in Rhode Island, and four in New Hampshire and Vermont. The remaining 59 of these projects are interpretive projects. Interpretive projects include research, aerial appraisal, and other hydrologic studies and include projects as diverse as (1) determining the direction of ground-water flow at a toxic site, (2) predicting the effect of acid rain on water quality of a reservoir, and (3) estimating yields of aquifers on Cape Cod. Of the interpretive projects, 26 are in Massachusetts, 17 in Connecticut, 17 are in New Hampshire and Vermont, 6 are in Maine, and 3 in Rhode Island. The report is compiled from project descriptions for fiscal year 1993. It briefly describes the water-resources activities and projects that were active in each District of the USGS, Water Resources Division, New England Program Area of September 30, 1993. Cooperator or funding source, problem statements, objectives, approaches, progress, and plans for next year are described for each project. The project area is located on a map of the appropriate State(s). The report contains a bibliography, by District and by author, of reports completed since 1977.

Open-File Report↗

Circum-North Pacific tectonostratigraphic terrane map

The companion tectonostratigraphic terrane and overlap assemblage of map the Circum-North Pacific presents a modern description of the major geologic and tectonic units of the region. The map illustrates both the onshore terranes and overlap volcanic assemblages of the region, and the major offshore geologic features. The map is the first collaborative compilation of the geology of the region at a scale of 1:5,000,000 by geologists of the Russian Far East, Japanese, Alaskan, Canadian, and U.S.A. Pacific Northwest. The map is designed to be a source of geologic information for all scientists interested in the region, and is designed to be used for several purposes, including regional tectonic analyses, mineral resource and metallogenic analyses (Nokleberg and others, 1993, 1994a), petroleum analyses, neotectonic analyses, and analyses of seismic hazards and volcanic hazards. This text contains an introduction, tectonic definitions, acknowledgments, descriptions of postaccretion stratified rock units, descriptions and stratigraphic columns for tectonostratigraphic terranes in onshore areas, and references for the companion map (Sheets 1 to 5). This map is the result of extensive geologic mapping and associated tectonic studies in the Russian Far East, Hokkaido Island of Japan, Alaska, the Canadian Cordillera, and the U.S.A. Pacific Northwest in the last few decades. Geologic mapping suggests that most of this region can be interpreted as a collage of fault-bounded tectonostratigraphic terranes that were accreted onto continental margins around the Circum- . orth Pacific mainly during the Mesozoic and Cenozoic (Fujita and ewberry, 1983; 1987; Parfenov, 1984, 1991; Howell, 1985; Watson and Fujita, 1985; Parfenov and Natal'in, 1984; Jones and others. 1987; Monger and Berg, 1987, Fujita and Cook. 1990; Zonenshain and others. 1990; Natal'in, 1991, 1993; Moore and others, 1992; Silberling and others, 1992; Nokleberg and others. 1992, 1993, 1994a; Parfenov and others. 1993; Plaflcer and Berg, 1994; Tabor, 1994). This map is the result of extensive geologic mapping and associated tectonic studies in the Russian Far East, Hokkaido Island of Japan, Alaska, the Canadian Cordillera, and the U.S.A. Pacific Northwest in the last few decades. Geologic mapping suggests that most of this region can be interpreted as a collage of fault-bounded tectonostratigraphic terranes that were accreted onto continental margins around the Circum- . orth Pacific mainly during the Mesozoic and Cenozoic (Fujita and ewberry, 1983; 1987; Parfenov, 1984, 1991; Howell, 1985; Watson and Fujita, 1985; Parfenov and Natal'in, 1984; Jones and others. 1987; Monger and Berg, 1987, Fujita and Cook. 1990; Zonenshain and others. 1990; Natal'in, 1991, 1993; Moore and others, 1992; Silberling and others, 1992; Nokleberg and others. 1992, 1993, 1994a; Parfenov and others. 1993; Plaflcer and Berg, 1994; Tabor, 1994). On the companion map and in the descriptions bel?w· terranes are interpreted according to inferred tectonic environments. These environments are (I) cratonai; (2) passive continental margin; (3) metamorphosed continental margin; (4) continental-margin arc; (5) island arc; (6) oceanic crust, seamount, and ophiolite; (7) accretionary wedge and subduction zone: (8) turbidite basin; and (9) metamorphic for terranes that are too highly-deformed and metamorphosed to de~ermine the original tectonic environment. For terranes with complex geologic histories, the chosen color indicates the tectonic environment most prevalent during this history of the terrane. The tectonic environments inf~rred for igneous rocks are both temporal and genetic. The temporal environments are preaccretion and postaccretion. The genetic environments are subduction-related, rift-related, and collisional (anatectic)- related. In addition to terranes, the map also depicts postaccretion units that include: (I) Cenozoic and Mesozoic overlap assemblages of sedimentary and volcanic rocks that are deposited across two or more terranes that formed generally after accretion of most terranes in the region; (2) Cenozoic and Mesozoic basinal deposits that occur within a terrane or on the craton; (3) plutonic rocks. The postaccretion igneous units are identified by age-lithologic abbreviations and by name. These overlap assemblages and basinal deposits formed mainly during sedimentation and magmatism that occurred after accretion of terranes to each other or to a continental margin. Overlap assemblages provide minimum ages on the timing of accretion of terranes. Some Cenozoic and Mesozoic overlap assemblages and basinal deposits, as well as fragments of terranes, are extensively offset by movement along postaccretion faults. In addition, in onshore areas, the map depicts major preaccretion plutonic rocks that are limited to individual terranes. and in offshore areas. the map depicts major oceanic plates,-ocean floor magnetic lineations. oceanic spreading ridges, and seamounts. The map consists of five sheets. Sheets I and 2 depict, at a scale of I :5.000.000. the tectonostratigraphic terranes. preaccretion plutonic rocks, and postaccretion Cenozoic and Mesozoic overlap sedimentary, volcanic. and plutonic assemblages, and basinal deposits for the Circum- orth Pacific including the Russian Far East, northern Hokkaido Island of Japan, Alaska. the Canadian Cordillera, part of the U.S.A. Pacific Northwest. and adjacent offshore areas. Sheet 3 provides the list of map units for Sheets I and 2. Sheet 4 is a index map showing generalized onshore terranes and overlap assemblages for onshore parts of the Circum-North Pacific at a scale of I: I 0,000,000. Sheet 4 is a guide to the more complicated onshore features depicted on Sheets I and 2. Sheet 5 is an index map showing the major geographic regions for the Circum-North Pacific. Significant differences exist between the representation of onshore and offshore geology on Sheets I and 2. These are: (I) compared to the onshore part of the map, the offshore part is depicted in a more schematic fashion because of more limited data and because the offshore terranes and early Cenozoic and older overlap assemblages generally are obscured by extensive late Cenozoic sedimentary cover that is not shown unless thicker than two kilometers; (2) marginal contacts of offshore Cenozoic and Cretaceous sedimentary basins do not match contacts of onshore Cenozoic and Cretaceous sedimentary units because offshore basins are limited to those regions with sediment thicknesses greater than two kilometers; (3) stratigraphic columns, included at the end of this explanation. are provided only for onshore terranes because the geology of offshore terranes is generally less well-known; and (4) for simplicity, the major onshore Cenozoic sedimentary basins are generally not defined and described separately because the onshore part of the map is designed to emphasize terranes and overlap volcanic assemblages that are crucial for both for tectonic and metallogenic analyses published elsewhere (Nokleberg and others, 1993, 1994a). Several key geologic sources were used in the compilation of the map. For Alaska. the basic outcrop pattern for the map is from Beikman (1980), Gehrels and Berg (1992, 1994). Barker and others ( 1994). Brew (1994), and Moli-Stalcup and others ( 1994b). The distribution of terranes is from Jones and others (1987) and Monger and Berg (1987), with modification by Grantz and other (1991 ). Worall (199 1 ), okleberg and others (1993, 1994a), the cited references, and the Alaskan co-authors of this report. For the Canadian Cordillera. the basic outcrop pattern is from Monger and Berg ( 1987), Wheeler and other (1988). and Wheeler and McFeeley ( 1991) with modifications by the Canadian authors. For the northern part of the Russian Far East. the basic outcrop pattern is from So unov (1985) with modifications by the Russian authors. For the outhern part of the Russian Far East, the basic outcrop pattern is from Krasny (1991) and Bazhanov and Oleinik ( 1986) with modification by the Russian authors. The Russian Far East part of the map is the first attempt to define and delineate terranes in that region. In their compilation. the Russian authors utilized the methodology of U.S.A. and Canadian geologists. Because this map is the first attempt to display the terranes. Cenozoic and Mesozoic overlap assemblages. basinal deposit , and plutonic belts of the Russian Far East. the Russian author will appreciate constructive sugge tions for improving the map.

Open-File Report↗

Geochemistry of sediments from coastal marshes of Louisiana

As a part of the U.S. Geological Survey Global Change and Climate History Program we have been studying the biogeochemistry of coastal marshes in Terrebonne Basin, Louisiana. Louisiana has about 40 percent of the coastal wetlands in the conterminous U.S. and it is losing wetlands at one of the highest rates in the U.S. with the conversion of about 65 km2/yr of marsh to open water (Britsch and Dunbar, 1993). The losses have been attributed to human and natural causes including saltwater intrusion through man-made canals, reduced sediment input, and regional subsidence. The net effect of these influences is to change the salinity of interior marshes in a fashion similar to a eustatic sea level rise. We are studying the cycling of carbon, sulfur, and other elements in sediments, waters, and marsh macrophytes in fresh, intermediate/brackish, and saltwater marshes in order to better understand how sea level rise, one aspect of global change, will influence and in turn be influenced by cycling of these elements. By characterizing the critical biogeochemical processes and the recent past environments in these rapidly changing marshes, we can improve predictions of future changes and interpretations of the historic geologic record in similar environments. In this report we describe our coastal marsh study sites in Louisiana, the types of samples collected, the collection methods, the chemical analysis methods, and selected chemical analysis results. Also included are summaries of the project quality control results. The raw chemical analysis results are provided in this report without interpretation. Interpretations will be provided in subsequent reports.

Louisiana↗