Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geological Society of London Special Publications”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,664 records · Page 66Linked to original sources
USGS2025

A regional model comparison between MODPATH and MT3D of groundwater travel time distributions

Groundwater quality changes in wells and streams lag behind changes to land use due to groundwater travel times. Two contaminant transport methods were compared to assess differences in their simulated travel time distributions (TTDs) to streams and wells in the Wisconsin Central Sands. MODPATH simulates advective groundwater flow with particle tracking, while MT3D simulates age-mass using a finite difference solution without dispersion to allow for direct comparison of the two methods. MODPATH appropriately simulates groundwater TTDs from the water table to surface discharge but is subject to inaccuracies at weak-sink well cells due to the flow-model grid discretization and imprecise location of well discharge within well cells. MT3D better represents weak-sink well cells since it removes mass in proportion to the prescribed pumping rate, although travel time within well cells is neglected. Conversely, MT3D's treatment of surface water boundary cells is not as accurate as MODPATH because mass should be removed from the water table rather than the full cell volume. MT3D simulations of TTDs can also be confounded by the instantaneous vertical distribution of mass introduced throughout recharge cells instead of at the water table, which initiates mass along deeper flow paths. We evaluated 9 MODPATH and 13 MT3D implementations, generating differences in median travel times of up to 18 years. Both methods have strengths and weaknesses, with MT3D better representing weak-sink well cell behavior and MODPATH better representing surficial recharge and discharge. The effect of these characteristics on simulated TTDs, along with ideas for ameliorating method weaknesses, is discussed.

Wisconsin↗
USGS2024

Fairweather transform boundary Oligocene to present orogenesis: Fairweather Range vertical extrusion and rotation of the Yakutat microplate at ca. 3 Ma

Oblique-slip along transform fault boundaries is often partitioned between a strike-slip system and thrust faults that accommodate contraction. However, topography along the Yakutat-North American transform (Fairweather fault), is asymmetric with low-terrain above active thrusts on the western, Yakutat side of the transform and high topography on the continental side with peaks >4500 m (Mount Fairweather: 4671 m) to the west of the Border Ranges fault, limited recorded earthquakes >M4, and no apparent reverse faults to generate the highest terrain. In this study we compile, for the first time, published U-Pb zircon, 40 Ar/ 39 Ar and K-Ar (hornblende, muscovite, and biotite) and U-Th/He and fission-track (zircon and apatite) bedrock ages (109) from 75 samples to investigate the exhumation history of the Fairweather Range region, complemented by a published detrital sample (ZFT and AFT) and 13 new 40 Ar/ 39 Ar (hornblende, biotite, and K-feldspar) ages on 9 bedrock samples from both sides of the Fairweather fault. Additionally, we examined published seismicity and geodetic data of the Fairweather region and assessed if plate paleo-vectors correlate with the cooling history of the Fairweather Range. Cooling age, seismic, and block-motion patterns indicate the Fairweather Range has been vertically extruded between the Fairweather and the Border Ranges faults as a coherent block since ca. 25 Ma. The pre-6 Ma Pacific plate motion (N30°W) aligns with the N33°W strike of the Fairweather Fault whereas a hypothetical pre-6 Ma Yakutat microplate paleo-vector of (N39°W) does not: indicating a post-6 Ma timing for Yakutat microplate counter-clockwise rotation (9°). We infer that rotation and impingement of the Yakutat microplate along the Fairweather fault at ca. 3 Ma led to the development of the Fairweather restraining bend and increased cooling rates. The resultant thickened Fairweather welt and the ∼30 km thick southeast end of the Yakutat microplate compounded double-indenter tectonics into Alaska's southeast convergent corner

Tectonophysics↗
USGS2025

Measurement of in situ-produced cosmogenic nuclides in fine-grained quartz from shale

In situ -produced 10 Be in quartz is widely used to constrain exposure ages and denudation rates, traditionally measured in sand-sized grains. Here we report a new method for isolating fine-grained quartz from shale and demonstrate its reliability for grain sizes down to single microns. Sequential dissolution tests and analyses of grain size separates show that meteoric 10 Be is eliminated and that recoil losses during cosmogenic nuclide production are balanced by implantation from other mineral grains. High-temperature combustion leads to diffusion of meteoric 10 Be into fine-grained quartz and must be used with caution.

Nuclear Instruments and Methods in Physics Researc↗
USGS2025

Groundwater surveillance of swine pathogens from private wells supplying swine farms in Iowa

Biosecurity practices are essential for maintaining pig health and productivity. Despite these measures, pathogen spread still occurs. Water is one of the largest daily inputs on swine farms by volume and is not routinely tested or disinfected before it is consumed by the animals [1-3], making it a poorly understood biosecurity risk. Groundwater from privately-owned wells is a common water source for swine farms. Pathogens in the landscape, such as bacteria, viruses, and protozoa, can reach groundwater more rapidly through soil macropores, maintaining viability and facilitating transmission of pathogens into aquifers [3-13].

Iowa↗
USGS2025

A spatiotemporal deep learning approach for predicting daily air-water temperature signal coupling and identification of key watershed physical parameters in a montane watershed

Seasonal shifts from runoff to groundwater dominance influence daily headwater stream temperatures, especially where local groundwater input is strong. This input buffers temperature during hot periods, supporting cold-water habitats. Recent studies use air–water temperature signal metrics to identify zones of strong stream–groundwater connectivity. While Previous studies used air–water signal ratios as proxies for groundwater influence but were limited to specific sites and periods, without dynamic forecasting. This study is the first to forecast daily A r as a spatiotemporal signal using a Graph Convolutional Network–Long Short-Term Memory (GCN-LSTM) model. The model was trained using hydroclimate data (air temperature, precipitation, shortwave radiation, streamflow) and watershed physical features (e.g., sand content, slope). Results showed high predictive skill, achieving R 2 (NSE, RMSE) of 0.86 (0.73, 0.0004) for one-day-ahead to 0.52 (0.50, 0.0009) for seven-days ahead forecasts. Prior studies often have not explicitly incorporated spatial hydrogeologic drivers, but this model explicitly incorporates them to assess their impact on A r forecasting and stream-groundwater connectivity. Feature analysis identified mean sand, elevation, slope, clay, and TWI as key predictors of A r . Stronger groundwater signals appeared in hillslopes, elevations, and tributaries, highlighting watershed influence on streamflow. However, limitations include reliance on historical air–water temperature patterns for training and limited representation of extreme climate conditions. Despite these limitations, unlike previous studies relying on measured in-situ stream and air temperature, this study forecasts A r directly from climate and physiographic features after training, avoiding in-situ data requirements. Findings aiding predictions of stream ecosystem resilience.

New York↗
USGS2026

Using a temporary emigration model to estimate abundance of stream fishes from hybrid removal surveys with and without block nets

Monitoring programs are often faced with a decision to allocate resources into either robust spatiotemporal coverage to estimate a population index (e.g., not true abundance) or confirming closed sampling conditions (e.g., with block nets) for an unbiased population estimate at the cost of spatiotemporal coverage. However, making accurate and precise abundance estimates at robust spatiotemporal scales is possible when combining open and closed sampling designs with integrated modeling techniques. We used simulations and a case study of backpack electrofishing surveys in the Santa Ana River, California to test the efficacy of an integrated abundance model (temporary emigration model, TE) to estimate abundance of fishes using removal sampling methods with a hybrid sampling design (sampling with and without block nets during removal sampling). We found that the TE model performed well under most modeling scenarios (sample size, amount of closure violation, number of samples collected during closure), although at least a few samples with block nets were necessary for all parameters to be estimable. When applied to fish surveys in the Santa Ana River, we found that catch of the fishes fit to the TE model (Santa Ana Sucker, Arroyo Chub, Channel Catfish, Largemouth Bass, Yellow Bullhead) showed little evidence that the closure assumption was violated when block nets were not used. Additionally, we found that the abundance of non-native fishes negatively affected the abundance of the native Santa Ana Sucker, which was also found to adversely affect the native fish’s access to critical habitat consisting of gravel and cobble substrate. Our results indicate that the TE model presents a viable solution to common sampling problems that impact many monitoring programs, where precise and accurate population estimates can be made at large spatiotemporal scales even when most samples violate the closure assumption.

California↗
USGS2024

Bioconcentration of per- and polyfluoroalkyl substances and precursors in fathead minnow tissues environmentally exposed to aqueous film-forming foam-contaminated waters

Exposure to per- and polyfluoroalkyl substances (PFAS) has been associated with toxicity in wildlife and negative health effects in humans. Decades of fire training activity at Joint Base Cape Cod (MA, USA) incorporated the use of aqueous film-forming foam (AFFF), which resulted in long-term PFAS contamination of sediments, groundwater, and hydrologically connected surface waters. To explore the bioconcentration potential of PFAS in complex environmental mixtures, a mobile laboratory was established to evaluate the bioconcentration of PFAS from AFFF-impacted groundwater by flow-through design. Fathead minnows ( n = 24) were exposed to PFAS in groundwater over a 21-day period and tissue-specific PFAS burdens in liver, kidney, and gonad were derived at three different time points. The ∑PFAS concentrations in groundwater increased from approximately 10,000 ng/L at day 1 to 36,000 ng/L at day 21. The relative abundance of PFAS in liver, kidney, and gonad shifted temporally from majority perfluoroalkyl sulfonamides (FASAs) to perfluoroalkyl sulfonates (PFSAs). By day 21, mean ∑PFAS concentrations in tissues displayed a predominance in the order of liver > kidney > gonad. Generally, bioconcentration factors (BCFs) for FASAs, perfluoroalkyl carboxylates (PFCAs), and fluorotelomer sulfonates (FTS) increased with degree of fluorinated carbon chain length, but this was not evident for PFSAs. Perfluorooctane sulfonamide (FOSA) displayed the highest mean BCF (8700 L/kg) in day 21 kidney. Suspect screening results revealed the presence of several perfluoroalkyl sulfinate and FASA compounds present in groundwater and in liver for which pseudo-bioconcentration factors are also reported. The bioconcentration observed for precursor compounds and PFSA derivatives detected suggests alternative pathways for terminal PFAS exposure in aquatic wildlife and humans.

Environmental Toxicology and Chemistry↗
USGS2024

Geomorphic map of the Umatilla River corridor, Oregon

This map portrays the distribution of landforms along the Umatilla River in northeastern Oregon and covers a corridor 127 kilometers long from the confluence of the Umatilla River with the Columbia River upstream to Meacham Creek. The map encompasses the valley bottom and extends about 1 kilometer up the adjoining hillslopes. Map data are intended to support water quality and fisheries enhancement efforts pursuant to the First Foods, a resource-management approach that focuses on traditionally gathered foods including water, fish, big game, roots, and berries and calls attention to the reciprocity between people and the foods upon which humans depend. The Umatilla River drains about 6,300 square kilometers on the northwest slope of the Blue Mountains in northeast Oregon. Most of the drainage basin is underlain by Miocene basalt flows of the Columbia River Basalt Group. Younger, weakly lithified, late Miocene and early Pliocene gravel deposits of local origin (for example, McKay Formation) are mapped in a few places. Upland surfaces are mantled with windborne silt (loess) correlative with deposits elsewhere known as the Palouse Formation. Surfaces below an elevation of about 340 meters were inundated repeatedly by large Pleistocene glacial outburst floods, most emanating from glacial Lake Missoula in western Montana. In backflooded areas such as the lower Umatilla River valley, Missoula floods deposited extensive slack-water silt. Areas mapped as open water, active channel and tie channel, flood basin, valley bottom, and modified land constitute the geomorphic floodplain: the area subject to occasional inundation by the Umatilla River. Deposits and landforms within the floodplain are inset into Missoula flood deposits and hence postdate the 20–15-kilo-annum Missoula floods. Some floodplain deposits are no more than a few centuries old, as indicated by substantial erosion and deposition during the Umatilla River flood of February 2020, the largest since systematic measurements began in October 1903. Deposits and landforms of the floodplain are transient features within the longer-term incision of the Umatilla River into mid-Miocene flood basalts and younger gravel of the McKay Formation.

Oregon↗
USGS2026

Microclimate mediates the strength and direction of avian biotic interactions

Theory predicts that that the strength and direction of species interactions can shift from being competitive in benign environments toward being facilitative in stressful environments. However, the environmental context dependency of species interactions has rarely been tested in animal communities. We capitalized on a 15-year, landscape-scale dataset, collected annually in a relatively stable old-growth forest environment to test the long-held hypothesis that the strength and direction of species interactions might be mediated by climatic conditions. It is generally accepted that competitive and facilitative interactions drive the distributions of many species. Using multi-species dynamic occupancy models applied to long-term data, we tested whether annual settlement by bird species could affect either the persistence or settlement by other phylogenetically related species, and whether these interactions are mediated by microclimate. We found that species interactions were influenced by microclimate for some, but not all avian species pairs. Related species pairs more often showed settlement dynamics that were indicative of attraction rather than repulsion. In some cases, competitive interactions at warmer microclimates flipped to become facilitative in colder ones. However, the reverse was also true: facilitative interactions amplified for some species under warm conditions. Furthermore, species pairs that were closely related were more likely to exhibit competitive relationships along at least part of the microclimatic gradient. Our results highlight the importance of using long-term data to incorporate competitive and facilitative interactions into species distribution models and support the notion that the strength and direction of species interactions can be dependent on microclimatic environmental conditions.

Oregon↗
USGS2000

Quality assurance and analysis of water levels in wells on Pahute Mesa and vicinity, Nevada Test Site, Nye County, Nevada

Periodic and continual water-level data from 1963 to 1998 were compiled and quality assured for 65 observation wells on Pahute Mesa and vicinity, Nye County, Nevada. As part of the quality assurance of all water levels, ancillary data pertinent to computing hydraulic heads in wells were compiled and analyzed. Quality-assured water levels that were not necessarily in error but which did not represent static heads in the regional aquifer system, or required some other qualification, were flagged. Water levels flagged include those recovering from recent pumping or well construction, water levels affected by nuclear tests, and measurements affected by borehole deviations. A cursory examination of about 30 wells with available water-level and down-hole temperature data indicate that water levels in most wells on Pahute Mesa would not be significantly affected by temperature if corrected to 95 degrees Fahrenheit. Wells with large corrections (greater than 10 feet) are those with long water columns (greater than 1,500 feet of water above the assumed point of inflow) in combination with mean water-column temperatures exceeding 105 degrees Fahrenheit. Water-level fluctuations in wells on Pahute Mesa are caused by several factors including infiltration of precipitation, barometric pressure, Earth tides, ground-water pumpage, and seismic events caused by tectonic activity and underground nuclear testing. No observed water-level fluctuations were attributed to a naturally occurring earthquake. The magnitude and duration of changes in water levels caused by nuclear tests are affected by the test size and the distance from a well to the test. Identifying water levels that might be affected by past nuclear tests is difficult because pre-testing water-level data are sparse. Hydrologically significant trends were found in 13 of 25 wells with multiple years of water-level record. The largest change in water levels (1,029 feet in 25 years) occurred in well U-19v PS 1D as a result of the Almendro nuclear test. Likely explanations for trends in most of the wells are either changes in precipitation patterns that affect recharge rates to the ground-water system, pumping effects from water-supply well U-20 WW, or a combination of these two factors.

Nevada↗
USGS2024

Repeated coseismic uplift of coastal lagoons above the Patton Bay Splay Fault System, Montague Island, Alaska, USA

Coseismic slip on the Patton Bay splay fault system during the 1964 M w 9.2 Great Alaska Earthquake contributed to local tsunami generation and vertically uplifted shorelines as much as 11 m on Montague Island in Prince William Sound (PWS). Sudden uplift of 3.7–4.3 m caused coastal lagoons along the island's northwestern coast to gradually drain. The resulting change in depositional environment from marine lagoon to freshwater muskeg created a sharp, laterally continuous stratigraphic contact between silt and overlying peat. Here, we characterize the geomorphology, sedimentology, and diatom ecology across the 1964 earthquake contact and three similar prehistoric contacts within the stratigraphy of the Hidden Lagoons locality. We find that the contacts signal instances of abrupt coastal uplift that, within error, overlap the timing of independently constrained megathrust earthquakes in PWS—1964 Common Era, 760–870 yr BP, 2500–2700 yr BP, and 4120–4500 yr BP. Changes in fossil diatom assemblages across the inferred prehistoric earthquake contacts reflect ecological shifts consistent with repeated draining of a lagoon system caused by >3 m of coseismic uplift. Our observations provide evidence for four instances of combined megathrust-splay fault ruptures that have occurred in the past ∼4,200 years in PWS. The possibility that 1964-style combined megathrust-splay fault ruptures may have repeated in the past warrants their consideration in future seismic and tsunami hazards assessments.

Alaska↗
USGS2026

Insights into Mountain Pass carbonatite formation from in-situ sulfur isotopes and geochemistry of sulfate and sulfide minerals

The Mountain Pass carbonatite stock hosts a world-class rare earth element deposit and may be classified as a carbonate-sulfate igneous rock, as it contains on average > 50 volume percent carbonate minerals and 20 to 30 volume percent sulfate minerals. The sulfates range in composition from barite to celestine and locally occur with sparse sulfide minerals. We investigate the origin of sulfur enrichment and the occurrence of sulfur-bearing minerals in the Mountain Pass carbonatite with in-situ sulfur isotope and mineral chemistry. Barite cores with δ 34 S of 1 to 3‰ do not coexist with sulfides, whereas celestine rims with δ 34 S of > 3‰ are associated with sulfides with δ 34 S < -10‰. We propose a model in which sulfur-bearing sediments were subducted during episodes of plate convergence in the Mojave Province that preceded Mountain Pass magmatism. Metasomatism of the overlying mantle by melts derived from the subducted sediments generated an unusually carbon- and sulfur-rich source to yield carbonatite magmas. Sulfur from primary carbonatite magmas and ~ 1 to 7% sulfur from subducted sediment melts yielded a slightly enriched δ 34 S composition (relative to depleted mantle δ 34 S of -1‰) for early crystallizing barite. Celestine rims on magmatic barite cores formed at low, hydrothermal temperatures (< 350 °C) based on S isotope thermometry for equilibrium celestine-galena and celestine-pyrite pairs. The sparse sulfides in the carbonatite stock are not in equilibrium with the primary barite cores and therefore do not permit S isotope thermometry estimates of magmatic temperatures. The S/Se ratios of sulfide minerals (> 3,400) typically exceed primitive mantle values (S/Se of 3,340), also consistent with their derivation from hydrothermal fluids. Trace occurrences of sulfide and sulfate minerals in alkaline silicate stocks related to the carbonatite stock have similar δ 34 S compositions and yield similarly low formation temperatures, suggesting regionally extensive and chemically similar sulfur-bearing hydrothermal fluids that imparted lithologically diverse rocks with a consistent sulfur isotope fingerprint.

California, Nevada↗
USGS2025

James Buttle review: The characteristics of baseflow resilience across diverse ecohydrological terrains

The dynamic storage of aquifers is the portion of groundwater that can potentially drain to any given point along a stream to create baseflow. Baseflow typically occurs year-round in perennial streams, though the characteristics and stability of dynamic storage are often most important to instream processes during extended dry periods (without precipitation and snowmelt) when runoff and quickflows are minimised. The term ‘baseflow resilience’ is defined for this review as the tendency of baseflow in streams to maintain a consistent volume and water quality year to year while under stress from climate variability and extremes, along with anthropogenic stressors such as water withdrawals, land use change, and water quality degradation. ‘Baseflow resilience’ has, in part, a user-defined meaning spanning water supply and water quality variables of primary interest. Watershed characteristics that directly impact resilience can often produce non-intuitive feedbacks that enhance some attributes of baseflow while simultaneously impairing others. For example, permeable stream corridor geology creates strong stream-groundwater hydrologic connectivity, yet fast groundwater drainage via preferential high-permeability flowpaths can lead to streamflow not being sustained during extended dry periods. Also, shallow groundwater sources are generally more immediately vulnerable to extreme events, warming, salinization, transpiration, and precipitation drought, compared to deeper groundwater. Yet baseflow drought in streams influenced by deeper groundwater can lag precipitation drought by years, and contaminant legacies may propagate through deep groundwater flowpaths to receiving waters for decades to centuries. Finally, irrigation withdrawals can intercept groundwater that would have drained to streams, and the application of irrigation may leach contaminants from the soil zone by unnaturally raising water tables, yet irrigation return flows can sustain baseflow and groundwater-dependent habitats in semiarid areas. This review covers the concept of hydrologic resilience in the context of stream baseflow processes and summarises the common hydrogeological controls on, and multiscale stressors of, dynamic groundwater storage. Further, we present several quantitative metrics to assess a range of water supply to water quality baseflow characteristics using both broadly available and boutique data types, a subset of which are demonstrated using data from the Delaware River Basin, USA.

Delaware River Basin↗
USGS2024

Constraining the earthquake recording threshold of intraslab earthquakes with turbidites in southcentral Alaska’s lakes and fjords

Strong ground motion from intraslab earthquakes, which do not produce primary paleoseismic evidence, may initiate gravity-driven turbidity flows in subaqueous basins. The resulting deposits (turbidites) can provide a paleoseismic proxy if the conditions that initiate these flows are known. To better constrain the initiating conditions, we use two recent intraslab earthquakes in southcentral Alaska, the M w 7.1 30 November 2018 Anchorage earthquake and the M w 7.1 24 January 2016 Iniskin earthquake, as calibration events. Through a multilake investigation, we document the occurrence, or the absence, of earthquake-generated turbidity flows from these two events. Both earthquakes are recorded by centimeter-scale turbidites that can be differentiated from climatically generated deposits, as well as other seismic sources based on deposit thickness, sedimentological properties, and deposit age. We show that a Modified Mercalli Intensity (MMI) of ∼V–V1/2 is the minimum shaking intensity required to generate localized sediment remobilization from deltaic slopes, and an MMI of ∼V1/2 is required to produce a deposit of sufficient thickness that a seismic origin can be confidently assigned. The documentation of seismically generated deposits in quick succession (∼2 years) with diagnostic features highlights the utility of using recent earthquakes as calibration events to investigate the subaqueous response to strong ground motion.

Alaska↗
USGS2024

The advantages of electric-grade heat storage in long closed-loop wells

Though long (e.g., tens of kilometers) closed-loop geothermal wells are under consideration for the extraction of subsurface heat, these wells might also serve as an efficient energy storage mechanism for electricity generation. Using a semi-analytic model solution, the potential for electric-grade heat storage as a function of ambient temperature (e.g., corresponds to depth of loop), well length, well diameter, and flow rate is evaluated. The following simplified cases for comparison of standard closed loop operation with energy storage operation were considered: [1] constant flow rate and constant temperature (90 °C) injection to represent the standard closed-loop base-case; and [2] constant flow rate and annual cycle sinusoidal temperature (90-150 °C) to represent seasonal (summer) charging while solar resources are peak. Initial temperatures for all scenarios considered herein are a uniform 175 °C. Electric-grade heat is assumed to be delivered whenever temperatures at the extraction point exceed 90 °C. For calculation purposes only, if temperature falls below 100 °C, it is assumed that heat delivered is sub-economic, so no electricity would be produced. For all scenarios, temperatures at the extraction well asymptotically approach the flow-weighted average injection temperature, but energy storage scenarios exhibited a damped time-varying signal that diminishes in magnitude with length of the loop. The asymptotic approach depends on initial temperatures in the rock and the heat extraction rate (a function of well diameter and flowrate). This analysis demonstrates that shorter closed loops can produce more electricity over time than longer closed-loops previously proposed for electricity production over typical engineering design lifetimes (e.g., 30 years). Although only a high-temperature scenario is considered herein, rock that is initially below boiling temperature would not host a standard closed-loop resource, but injection of hot water seasonally would asymptotically heat this low-temperature system to temperatures capable of electricity production. In other words, regardless of initial temperatures, closed loops could be used to store electricity with no critical minerals in the geothermal battery.

Conference Paper↗
USGS2024

Apatite and monazite geochemistry record magmatic and metasomatic processes in rare earth element mineralization at Mountain Pass, California

The largest rare earth element (REE) deposit in the United States is a carbonatite intrusion at Mountain Pass in the Mojave Desert, California. Despite a clear spatiotemporal association of alkaline silicate and carbonatite intrusions at Mountain Pass, a genetic model of their mutual formation has not been resolved. The Mountain Pass carbonatite has long been upheld as an example of a primary magmatic body, but recent work has suggested it could be fluid-derived. This study investigates the geochemistry of apatite and monazite grains from the alkaline silicate and carbonatite stocks and dikes of the Mountain Pass district, to elucidate the magmatic history of the intrusive suite and identify the role of fluids in rare earth element mineralization. Three apatite populations are identified in the alkaline silicate rocks. A primary magmatic apatite group supports intrusion of the stocks as separate pulses of magma derived from a spatially extensive metasomatized mantle source region. The second group implicates the role of a regional fluid that mobilized light rare earth elements from apatite grains. A minor group of inherited apatite cores, identified by low Sr and negative Eu anomalies, supports assimilation of crustal material in the formation of the intrusive suite. Analyses of monazite and apatite grains from the carbonatite orebody also reveal a mix of primary magmatic and metasomatic (fluid-related) minerals. Compositional similarities between primary phosphates in the carbonatite and alkaline silicate rocks support a genetic link between the intrusive suites. The presence of fluids regionally and within the carbonatite orebody indicates the Mountain Pass carbonatite should not be classified as a purely magmatic REE deposit.

Arizona, California, Nevada↗
USGS2024

Assessing potential effects of oil and gas development activities on groundwater quality near and overlying the Elk Hills and North Coles Levee Oil Fields, San Joaquin Valley, California

Groundwater resources are utilized near areas of intensive oil and gas development in California’s San Joaquin Valley. In this study, we examined chemical and isotopic data to assess if thermogenic gas or saline water from oil producing formations have mixed with groundwater near the Elk Hills and North Coles Levee Oil Fields in the southwestern San Joaquin Valley. Major ion concentrations and stable isotope compositions were largely consistent with natural processes, including mixing of different recharge sources and water-rock interactions. Trace methane concentrations likely resulted from microbial rather than thermogenic sources. Trace concentrations of benzene and other dissolved hydrocarbons in three wells had uncertain sources that could occur naturally or be derived from oil and gas development activities or other anthropogenic sources. In the mid-1990s, two industrial supply wells had increasing Cl and B concentrations likely explained by mixing with up to 15 percent saline oil-field water injected for disposal in nearby injection disposal wells. Shallow groundwater along the western margin of Buena Vista Lake Bed had elevated Cl, B, and SO 4 concentrations that could be explained by accumulation of salts during natural wetting and drying cycles or, alternatively, legacy surface disposal of saline oil-field water in upgradient ephemeral drainages. This study showed that groundwater had relatively little evidence of thermogenic gas or saline water from oil and gas sources in most parts of the study area. However, the evidence for groundwater mixing with injected disposal water, and possibly legacy surface disposal water, demonstrates produced water management practices as a potential risk factor for groundwater-quality degradation near oil and gas fields. Additional studies in the San Joaquin Valley and elsewhere could improve understanding of such risks by assessing the locations, volumes, and types of produced water disposal practices used during the life of oil fields.

California↗
USGS2024

Upper crustal seismic velocity structure of the Hayward fault zone, San Francisco Bay, California, USA: Results from the 2016 East Bay Seismic Experiment (EBSI-16)

We developed Vp, Vs, Vp / Vs ratio, and Poisson’s ratio models of the uppermost crust (<4 km depth) from the eastern San Francisco (SF) Bay (California, USA) to near the Calaveras fault along a 15-km-long, linear profile. Upper crustal velocities are highly variable beneath, west, and well east of the Hayward fault. We observe eight notable features, from west to east: (1) Near San Francisco Bay, there is an ~2-km-wide structure with high Vp / Vs ratios (up to 5) and Poisson’s ratios (up to 0.48) extending from the surface to the base of our model, which we suggest the structure is a near-vertical fault that lies along a straight-line projection between the Silver Creek fault to the south and the Point Richmond fault to the north. The structure may be part of an ~90-km-long fault along the eastern SF Bay. (2) The western East Bay Plain, the lower lying area between the bay and the hills, includes up to 800 m of low-velocity sediments ( Vp ~1600–3000 m/s, Vs ~500 m/s to ~1000 m/s), underlain by higher velocity basement rocks ( Vp ~3000–5800 m/s; Vs ~1000–1500 m/s). (3) Between ~1 km and 3 km east of the Bay shoreline, sediments thin in a series of steps (likely faults) toward the Hayward fault. (4) Between ~3 km west and ~1 km east of the Hayward fault (at the East Chabot fault) at depths greater than 1 km, basement Vp (up to 6000 m/s) and Vs (up to 2800 m/s) are high, and Vp / Vs ratios (<2) and Poisson’s ratios (<0.3) are low, suggesting crystalline rocks. Furthermore, a near-vertical zone of low Vp / Vs ratios and Poisson’s ratios is between near-surface traces of the Hayward and East Chabot faults, likely corresponding to the San Leandro Gabbro of Ponce et al. (2003) . (5) Eastward of the East Chabot fault in the upper 1.5 km, basement Vp (~3000 m/s to ~4200 m/s) and Vs (~1200–2000 m/s) are lower than those west of the fault. (6) In the eastern Hayward/Oakland Hills, there are zones of laterally varying, high- and low-velocity ( Vp ~2500–3000 m/s) Jurassic–Cretaceous and Tertiary sediments in the shallow subsurface that likely extend much deeper than imaged. (7) Seismic energy that propagates westward from sources east of the Hayward fault (HF) appear weaker than energy that propagates eastward from sources west of the HF, suggesting that the HF acts as a partial barrier to shallow seismic energy propagation into the more populated eastern SF Bay area. (8) Unlike many fault zones, it appears that the active trace of the Hayward fault (in our study area) is not cored by a prominent, low-velocity zone relative to rocks to the east and west of the active trace. However, the active trace does mark a prominent change from relatively higher velocities to the west and lower velocities to the east.

California↗