Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geological & Geophysical Surveys”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66Linked to original sources

Aeromagnetic maps of the Latir Peak and Wheeler Peak Wildernesses and the Columbine-Hondo Wilderness Study Area, Taos County, New Mexico

This report interprets data from a helicopter-borne magnetic survey to help delineate subsurface geology. Such data, acquired near the ground, reflect greater magnetic detail than do data acquired at higher altitude. Data from a high-altitude reconnaissance aeromagnetic survey (U.S. Geological Survey, 1976) are used selectively to assist in the interpretation of the helicopter data. Interpretations are chiefly empirical, wherein magnetic anomalies characterizing known geologic features in the region are used as interpretive criteria for identifying such features where they are concealed. Identifying geologic environments favorable for mineral deposits is a primary objective of this report. Geophysical interpretations of a broader and more general scope are made from other geophysical data by Cordell and Jones (in press).

New Mexico↗

U.S. Geological Survey coastal plain amplification virtual workshop

In early October of 2020, the U.S. Geological Survey (USGS) held a virtual workshop to discuss Gulf and Atlantic Coastal Plains site-response models. Earthquake researchers came together to assess (1) research related to proposed Coastal Plains amplification models and (2) USGS plans for implementing these models. Presentations spanned a broad range of topics from Atlantic and Gulf Coastal Plains geophysical properties including seismic velocity and attenuation, to ground motion amplification models and their impacts on seismic hazard. Interspersed with these presentations were discussions regarding the definition and extent of the Atlantic and Gulf Coastal Plains, potential complexities of wave propagation in the Atlantic and Gulf Coastal Plains, and problems that need to be overcome to implement various proposed site-response models. Based on feedback from this workshop, the USGS working group on Coastal Plain Amplification is considering applying published models that depend on sediment thickness. The working group is also exploring potential application of models that depend on the length of path traversed across the Coastal Plain, including the Gulf Coastal Plain ground-motion model adjustments from the Next Generation Attenuation Relationships for the Eastern United States.

Gulf and Atlantic Coast Plains↗

A deposit model for Mississippi Valley-Type lead-zinc ores

This report is a descriptive model of Mississippi Valley-Type (MVT) lead-zinc deposits that presents their geological, mineralogical and geochemical attributes and is part of an effort by the U.S. Geological Survey Mineral Resources Program to update existing models and develop new models that will be used for an upcoming national mineral resource assessment. This deposit modeling effort by the USGS is intended to supplement previously published models for use in mineral-resource and mineral-environmental assessments. Included in this report are geological, geophysical and geochemical assessment guides to assist in mineral resource estimation. The deposit attributes, including grade and tonnage of the deposits described in this report are based on a new mineral deposits data set of all known MVT deposits in the world. Mississippi Valley-Type (MVT) lead-zinc deposits are found throughout the world but the largest, and more intensely researched deposits occur in North America. The ores consist mainly of sphalerite, galena, and generally lesser amounts of iron sulfides. Silver is commonly an important commodity, whereas Cu is generally low, but is economically important in some deposits. Gangue minerals may include carbonates (dolomite, siderite, ankerite, calcite), and typically minor barite. Silicification of the host rocks (or quartz gangue) is generally minor, but may be abundant in a few deposits. The deposits have a broad range of relationships with their host rocks that includes stratabound, and discordant ores; in some deposits, stratiform and vein ore are important. The most important characteristics of MVT ore deposits are that they are hosted mainly by dolostone and limestone in platform carbonate sequences and usually located at flanks of basins, orogenic forelands, or foreland thrust belts inboard of the clastic rock-dominated passive margin sequences. They have no spatial or temporal relation to igneous rocks, which distinguishes them from skarn or other intrusive rock-related Pb-Zn ores. Abundant evidence has shown that the ore fluids were derived mainly from evaporated seawater and were driven within platform carbonates by large-scale tectonic events. MVT deposits formed mainly during the Phanerozoic with more than 80 percent of the deposits hosted in Phanerozoic rocks and less than 20 percent in Precambrian rocks. Phanerozoic-hosted MVT deposits also account for 94 percent of total MVT ore, and 93 percent of total MVT lead and zinc metal. Many MVT deposits formed during Devonian to Permian time, corresponding to a series of intense tectonic events during assimilation of Pangea. The second most important period for MVT deposit genesis was Cretaceous to Tertiary time when microplate assimilation affected the western margin of North America and Africa-Eurasia. Many subtypes or alternative classifications have been applied to MVT deposits. These alternative classifications reflect geographic and or specific geological features that some workers believe set them apart as unique (for example, Appalachian-, Alpine-, Reocin-, Irish-, Viburnum trend-types). However, we do not consider these alternative classifications or sub-types to be sufficiently different to warrant using them. This report also describes the geoenvironmental characteristic of MVT deposits. The response of MVT ores in the supergene environment is buffered by their placement in carbonate host rocks which commonly results in near-neutral associated drainage water. The geoenvironmental features and anthropogenic mining effects presented in this report illustrates this important environmental aspect of MVT deposits which separates them from other deposit types (especially coal, VHMS, Cu-porphyry, SEDEX, acid-sulfate polymetallic vein).

Scientific Investigations Report↗

Survey explores active tectonics in northeastern Caribbean

There is renewed interest in studying the active and complex northeastern Caribbean plate boundary to better understand subduction zone processes and for earthquake and tsunami hazard assessments [e.g., ten Brink and Lin , 2004; ten Brink et al ., 2004; Grindlay et al ., 2005]. To study the active tectonics of this plate boundary, the GEOPRICO-DO (Geological, Puerto Rico-Dominican) marine geophysical cruise, carried out between 28 March and 17 April 2005 (Figure 1), studied the active tectonics of this plate boundary. Initial findings from the cruise have revealed a large underwater landslide, and active faults on the seafloor (Figures 2a and 2c). These findings indicate that the islands within this region face a high risk from tsunami hazards, and that local governments should be alerted in order to develop and coordinate possible mitigation strategies.

Eos, Transactions, American Geophysical Union↗

Borehole Geophysical Logging of Water-Supply Wells in the Piedmont, Blue Ridge, and Valley and Ridge, Georgia

Crystalline and carbonate-rock aquifers in northern Georgia provide water to an ever-increasing number of private and public wells in the region. Understanding the depth and yield of water-bearing zones in such wells is crucial for the development and long-term sustainability of ground-water resources and for keeping wells in good operating condition. Portable geophysical logging units are now widely available and have greatly increased the ability of geoscientists to obtain subsurface information from water wells.

Georgia↗

Rare chemical constituents of amelia (Virginia) pegmatite dikes, and their mineral sources

Students of Igneous phenomena have long since become familiar with the occurrence of rare minerals in pegmatitic bodies. The great local concentration of rare elements in pegmatite minerals provides a remarkably good opportunity for the Investigation of deep-seated rock constituents, for it is reasonable to suppose that these same elements are widely distributed in minute amounts through the parent rocks to which they are genetically related; but their concentration in pegmatite bodies affords a record of their presence that is lacking in other rocks. The unusual number of rare minerals of the Amelia, Virginia, pegmatites has long attracted attention, and the rare elements of the more abundant minerals which have been investigated in the laboratories of the United States Geological Survey afford an unusual opportunity to study the rare constituents of a pegmatite. This famous locality for rare minerals is situated 38 miles southwest of Richmond, just south of Appomattox River, on the Piedmont plateau.

Eos, Transactions, American Geophysical Union↗

A conceptual hydrogeologic model for the hydrogeologic framework, geochemistry, and groundwater-flow system of the Edwards-Trinity and related aquifers in the Pecos County region, Texas

The Edwards-Trinity aquifer is a vital groundwater resource for agricultural, industrial, and municipal uses in the Trans-Pecos region of west Texas. A conceptual model of the hydrogeologic framework, geochemistry, and groundwater-flow system in the 4,700 square-mile study area was developed by the U.S. Geological Survey (USGS) in cooperation with the Middle Pecos Groundwater Conservation District, Pecos County, City of Fort Stockton, Brewster County, and Pecos County Water Control and Improvement District No. 1. The model was developed to gain a better understanding of the groundwater system and to establish a scientific foundation for resource-management decisions. Data and information were collected or obtained from various sources to develop the model. Lithologic information obtained from well reports and geophysical data were used to describe the hydrostratigraphy and structural features of the groundwater system, and aquifer-test data were used to estimate aquifer hydraulic properties. Groundwater-quality data were used to evaluate groundwater-flow paths, water and rock interaction, aquifer interaction, and the mixing of water from different sources. Groundwater-level data also were used to evaluate aquifer interaction as well as to develop a potentiometric-surface map, delineate regional groundwater divides, and describe regional groundwater-flow paths. Several previous studies have been done to compile or collect physical and chemical data, describe the hydrogeologic processes, and develop conceptual and numerical groundwater-flow models of the Edwards-Trinity aquifer in the Trans-Pecos region. Documented methods were used to compile and collect groundwater, surface-water, geochemical, geophysical, and geologic information that subsequently were used to develop this conceptual model.

Texas↗

Earth‐tides shown by fluctuations of water‐levels in wells in New Mexico and Iowa

It is quite generally known that ocean‐tides produce fluctuations of the water‐level in wells of the artesian type located close to the seashore by periodically changing the external load on the aquifer [see 1 of “References” at end of paper]. Fluctuations of ground‐water as a result of earth‐tides, however, are not generally known although they were observed and studied in a flooded coal‐mine in Europe [2] as early as 1879, and later 1905 to 1912 in wells in South Africa [3]. The phenomena of earth‐tides first came to the attention of the writer in March, 1938, when studying fluctuations of the water‐level In an artesian well near Carlsbad, New Mexico, recorded on charts of a water‐stage recorder, which had an approximately semidiurnal period. Because of the distance from the ocean, about 500 miles, and the altitude of the water‐bearing formation, about 2700 feet, it appeared that the fluctuations could not be the result of ocean‐tides. Neither did it appear they could be the result of other natural phenomena such as changing air‐pressure or changes in water‐level of a nearby lake and river. There was no pumpage from the aquifer, so the fluctuations of the water could not be caused by pumping. T. M. Cramer, Resident Manager of the United States Potash Company at Carlsbad, New Mexico, suggested that the fluctuations must be the result of some lunar attraction. Further study of the fluctuation was made by Dr. C. V. Theis, of the United States Geological Survey, and the writer, whereby the effect of changing air‐pressure was eliminated by correcting the water‐levels to an assumed constant atmospheric pressure. In this study it was demonstrated after applying the barometric correction that the remaining fluctuations were fairly regular and progressed with the transit of the Moon. It was also demonstrated that the fluctuations were of the greatest amplitude during the period of new Moon. Further work by W. E. Hale, of the United States Geological Survey, and the writer, has shown that the fluctuations were much more regular and of greater amplitude during the periods of new and full Moon than during the first and third quarters. It was, therefore, concluded that they are related to true earth‐tides. A preliminary note was published in the Transactions of the American Geophysical Union for 1938 [4].

New Mexico↗

Index for reports released through the Department of Energy, DOE National Uranium Resource Evaluation Program, and Atomic Energy Commission

The U.S. Government's National Uranium Resource Evaluation (NURE) Program commenced in 1974 and was last comprehensively reported on in An Assessment Report on Uranium in the United States of America , GJO-111(80), dated October 1980. During the seven years of the NURE Program, an unprecedented quantity of geoscience information was gathered throughout the conterminous United States and Alaska. The resulting data bases in geology, geophysics, and geochemistry are substantial and can be applied to the search for many mineral resource commodities other than uranium. This paper describes briefly what data are available, where the data are located, and how they can be obtained by the public. These data fall into seven major categories: Geologic Quadrangle Maps, Radiometric Data from Aerial Surveys, Magnetic Data from Aerial Surveys, Geochemical Data from Waters and Sediments, Radiometric Data from Borehole Logging, Mineralogic Data from Rock Sample Analysis, Evaluation Data for Resource Estimates. Nearly all the NURE data were acquired, are organized, and can be accessed by National Topographic Map Series (NTMS) 1:250,000-scale quadrangle. Figures 1 and 2 show the distribution of these quadrangles throughout the lower 48 states and Alaska, respectively. Listed below are the 20 repositories scattered across the country where the U.S. Department of Energy (DOE) has placed most of the information on open-file.

Report↗

Geophysical data collected during the 2014 minute 319 pulse flow on the Colorado River below Morelos Dam, United States and Mexico

Geophysical methods were used to monitor infiltration during a water release, referred to as a “pulse flow,” in the Colorado River delta in March and April 2014. The pulse flow was enabled by Minute 319 of the 1944 United States–Mexico Treaty concerning water of the Colorado River. Fieldwork was carried out by the U.S. Geological Survey and the Centro de Investigación Científica y de Educación Superior de Ensenada as part of a binational effort to monitor the hydrologic effects of the pulse flow along the limitrophe (border) reach of the Colorado River and into Mexico. Repeat microgravity measurements were made at 25 locations in the southern limitrophe reach to quantify aquifer storage change during the pulse flow. Observed increases in storage along the river were greater with distance to the south, and the amount of storage change decreased away from the river channel. Gravity data at four monitoring well sites indicate specific yield equal to 0.32±0.05. Electromagnetic induction methods were used at 12 transects in the limitrophe reach of the river along the United States– Mexico border, and farther south into Mexico. These data, which are sensitive to variation in soil texture and water content, suggest relatively homogeneous conditions. Repeat direct-current resistivity measurements were collected at two locations to monitor groundwater elevation. Results indicate rapid groundwater-level rise during the pulse flow in the limitrophe reach and smaller variation at a more southern transect. Together, these data are useful for hydrogeologic characterization and hydrologic model development. Electronic data files are provided in the accompanying data release (Kennedy and others, 2016a).

Arizona, Baja California, California↗

Streams, springs, and volcanic lakes for volcano monitoring

Introduction Volcanic unrest can trigger appreciable change to surface waters such as streams, springs, and volcanic lakes. Magma degassing produces gases and soluble salts that are absorbed into groundwater that feeds streams and lakes. As magma ascends, the amount of heat and degassing will increase, and so will any related geochemical and thermal signal. Subsurface magma movement can cause pressurization that alters hydrostatic head and may induce groundwater discharge. Fluid-pressure changes have been linked to distal volcano-tectonic earthquakes (White and McCausland, 2016; Coulon and others, 2017) and phreatic eruptions (for example, Yamaoka and others, 2016). Clearly, changes in groundwater and surface waters are both indicators of unrest and clues to how and where magma is rising toward the surface. Where possible, it is prudent to incorporate real-time hydrologic data into multiparameter monitoring of restless volcanoes. Hydrologic dynamics can also be tracked by changes in groundwater levels that are commonly measured in shallow boreholes (see of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–K, 5 p., https://doi.org/10.3133/sir20245062k. ">chapter K , this volume, on boreholes; Hurwitz and Lowenstern, 2024). Although inferred to be common, relatively few volcano-hydrology anomalies are well documented, and many are essentially anecdotal (Newhall and others, 2001), reflecting the fact that high-resolution time series remain rare. Extreme examples include the 2008 eruption of Nevado del Huila, Colombia, where relatively minor phreatomagmatic eruptions were accompanied by expulsion of as much as 300 million cubic meters of groundwater from fissures high on the volcano (Worni and others, 2011), generating large lahars. Substantial decreases in flow rate from springs about 8 kilometers from the summit of Mayon Volcano, Philippines, have been noted before most eruptions in the 20th century (Newhall and others, 2001). Stream monitoring at Redoubt Volcano in 2009 allowed Werner and others (2012) to recognize that groundwater was unable to absorb (or scrub) the high flux of volcanic gas and that a high CO 2 /SO 2 precursor signal had been evident for 5 months prior to the eruption. A key to better interpreting hydrologic anomalies—or even identifying them—is therefore obtaining adequate baseline data. Most hydrologic monitoring at U.S. volcanoes has been accomplished by intermittent sampling surveys with annual or less frequent sampling (for example, https://hotspringchem.wr.usgs.gov/index.php ). More frequent sampling, however, generally is needed to establish reliable baselines. A recent hydrologic and hydrothermal monitoring experiment at 25 sites and 10 of the 12 level 4 (very high threat) volcanoes in the U.S. portion of the Cascade Range demonstrated that there is sufficient temporal variability in hydrothermal fluxes, even during quiescent periods, that one-time measurements will commonly have limited interpretive value (Crankshaw and others, 2018). Thus, surveys are best augmented with data from streamgages (for example, Evans and others, 2004; Bergfeld and others, 2008). Streamflow (water discharge) data allow measured temperature and specific conductance to be converted to heat and solute mass fluxes, which could be insightful parameters for detecting anomalous activity (McCleskey and others, 2012). At the Yellowstone Caldera, long-term monitoring of river solutes has allowed calculation of the chloride flux, a proxy for heat discharge (Hurwitz and others, 2007; McCleskey and others, 2016) from the subsurface magma. This is readily accomplished because data from streamgages are continuously recorded and archived by the U.S. Geological Survey (USGS) National Water Information System (NWIS) (USGS, 2024). Similar studies on stratovolcanoes or shield volcanoes would be scientifically useful, and yet are logistically challenging, requiring streamgages on numerous radial drainages complemented by either frequent manual sampling or numerous deployments of equipment to measure water temperature and specific conductance as a proxy for water chemistry. Another challenge is that some volcanic areas, especially shield volcanoes, are characterized by near-surface porous rocks and soils, such that surface streams are rare and replaced by distant, dilute large-volume springs with only a trace of any original volcanically sourced water (Manga, 2001; Hurwitz and others, 2021). Volcanic lakes are worthy of special attention for monitoring efforts, as their temperature and composition can provide evidence of increased flux of volatile-rich fluids from below. Quantifying changes in volatile and heat release from magma can be simpler in lakes than for volcanoes with radial drainages and no major lakes. Moreover, volcanic lakes pose a range of hazards themselves, including phreatomagmatic eruptions, debris flows, flank collapse, tsunamis, and toxic gas release (Mastin and Witter, 2000; Delmelle and others, 2015; Manville, 2015; Rouwet and others, 2015)—hazards that have historically been responsible for substantial loss of life at many volcanoes worldwide (Manville, 2015). Catastrophic CO 2 release at Lake Nyos, Cameroon, in 1986 suffocated about 1,750 people and about 3,500 livestock and was probably triggered by a large landslide into the gas-saturated lake (Kling and others, 1987; Evans and others, 1993). Gas-charged springs in Soda Bay within Clear Lake (California) have caused almost a dozen deaths to bathers in the past hundred years (ABC News, 2000). A 2005 example of lake overturn and abundant gas release was documented at Mount Chiginagak in Alaska (Schaefer and others, 2008) but did not result in any human casualties. Although thermally stratified lakes, which promote trapping of exsolved magmatic gas, tend to develop in tropical regions, the phenomenon can also arise where salinity creates meromixis (a condition in which a lake does not mix completely), as occurs in Mono Lake, California (Jellison and Melack, 1993; Jellison and others, 1998). If magma erupts or flows into a lake, the interaction between hot magma and cold water can be explosive (Mastin and others, 2004; Zimanowski and others, 2015) and substantially expand the area affected by the eruption. Another hazard is the breaching of crater rims by landslides triggered by volcanic and (or) seismic activity. Under some circumstances, substantial volumes of water can be displaced, leading to large floods and lahars. Late Holocene lake flooding from Aniakchak Crater in the Alaska Peninsula (Waythomas, 2022) and from Paulina Lake in Newberry Crater, Oregon (Chitwood and Jensen, 2000), caused by the failure of outlet sills, testify to the substantial hazards at lake-filled calderas. Several volcanic systems in the United States host lakes known to receive heat and gas from underlying magma. These lakes vary widely in area, depth, and chemical composition. Lakes are present at level 4 volcanoes, including Crater Lake and Newberry Volcano in Oregon; Yellowstone Caldera in Wyoming; Long Valley Caldera, Clear Lake volcanic field, Medicine Lake, and Salton Buttes in California; and Aniakchak Crater, Mount Katmai, Fisher Caldera, Mount Okmok, and Kaguyak Crater, among others, in Alaska. A water lake was present in Halemaʻumaʻu, the crater of Kīlauea, Hawai‘i (fig. F1), from October 2019 to December 2020. Level 3 volcanoes with lakes include Mono Lake volcanic field (Calif.), Mount Bachelor (Ore.), Ukinrek Maars and Mount Chiginagak (Alaska), and Soda Lake (Nevada). In addition, there are lakes at many levels 1 and 2 volcanoes. In the United States, there are no strongly acidic lakes that receive abundant input of magmatic gas, such as those found at Mount Ruapehu (New Zealand), Ijen and Kelud (Indonesia), and Poás (Costa Rica). Nevertheless, many contain fluids that provide clues to magmatic processes below. Since publication of a previous report on recommended instrumentation for volcano monitoring (Moran and others, 2008), continuous hydrologic monitoring has become increasingly feasible. However, changes in water pressure, temperature, and chemistry remain, in general, poorly studied phenomena at volcanoes (Sparks, 2003; National Academies of Sciences, Engineering, and Medicine, 2017). Recent efforts by the USGS have included the temporary study of Cascade Range volcanoes, which included frequent (15 minute to hourly) temporal sampling of temperature, depth, and conductivity (Crankshaw and others, 2018; Ingebritsen and Evans, 2019). At Yellowstone Caldera, many streamgages have now added thermistors and specific conductance sensors, allowing estimation of time-dependent chloride flux as a proxy for variations in subsurface heat flux (McCleskey and others, 2012, 2016). Efforts to better understand lakes have also accelerated, with bathymetric mapping and sampling carried out at several locations in the United States. Especially thorough work was done at Yellowstone Lake thanks to the Hydrothermal Dynamics of Yellowstone Lake (HD-YLAKE, https://hdylake.org ) project, funded primarily by the National Science Foundation. In addition to geophysical surveys and recovery of cores and other samples, HD-YLAKE investigations included remotely operated vehicle (ROV) investigations of hydrothermal vents on the lake floor (fig. F2). Data collected by the ROV provided a better understanding of the thermal and chemical influx from lake-bottom hydrothermal systems (Sohn and others, 2017). In this chapter, we focus on detecting changes in the chemistry, temperature, discharge, or water levels of streams, springs, and lakes that can be caused by seismicity, volumetric strains, or increases in gas flux associated with ascending magma. There is unavoidable overlap with other chapters of this report. Samples of water and gas can also be obtained in boreholes ( of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–K, 5 p., https://doi.org/10.3133/sir20245062k. ">chapter K , this volume; Hurwitz and Lowenstern, 2024), both shallow and deep. Gas monitoring ( of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–E, 11 p., https://doi.org/10.3133/sir20245062e.">chapter E , this volume; Lewicki and others, 2024) relies in part on samples from springs and wells, particularly where measurable gas plumes are absent. Water acts as a trigger and lubricant for landslides and sediment-rich floods, and so hydrology has obvious relevance for lahar monitoring, as discussed in of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–H, 6 p., https://doi.org/10.3133/sir20245062h. ">chapter H (this volume; Thelen and others, 2024). Shared situational awareness among scientists engaged in geophysical, gas, and hydrologic monitoring will improve overall understanding of the volcanic hazard.

Scientific Investigations Report↗

Changes in groundwater flow and volatile organic compound concentrations at the Fischer and Porter Superfund Site, Warminster Township, Bucks County, Pennsylvania, 1993-2009

The 38-acre Fischer and Porter Company Superfund Site is in Warminster Township, Bucks County, Pa. Historically, as part of the manufacturing process, trichloroethylene (TCE) degreasers were used for parts cleaning. In 1979, the Bucks County Health Department detected TCE and other volatile organic compounds (VOCs) in water from the Fischer and Porter on-site supply wells and nearby public-supply wells. The Fischer and Porter Site was designated as a Superfund Site and placed on the National Priorities List in September 1983. A 1984 Record of Decision for the site required the Fischer and Porter Company to pump and treat groundwater contaminated by VOCs from three on-site wells at a combined rate of 75 gallons per minute to contain groundwater contamination on the property. Additionally, the Record of Decision recognized the need for treatment of the water from two nearby privately owned supply wells operated by the Warminster Heights Home Ownership Association. In 2004, the Warminster Heights Home Ownership Association sold its water distribution system, and both wells were taken out of service. The report describes changes in groundwater levels and contaminant concentrations and migration caused by the shutdown of the Warminster Heights supply wells and presents a delineation of the off-site groundwater-contamination plume. The U.S. Geological Survey (USGS) conducted this study (2006-09) in cooperation with the U.S. Environmental Protection Agency (USEPA). The Fischer and Porter Site and surrounding area are underlain by sedimentary rocks of the Stockton Formation of Late Triassic age. The rocks are chiefly interbedded arkosic sandstone and siltstone. The Stockton aquifer system is comprised of a series of gently dipping lithologic units with different hydraulic properties. A three-dimensional lithostratigraphic model was developed for the site on the basis of rock cores and borehole geophysical logs. The model was simplified by combining individual lithologic units into generalized units representing upward fining sedimentary cycles capped by a siltstone bed. These cycles were labeled units 1 through 8 and are called stratigraphic units in this report. Groundwater in the unweathered zone mainly moves through a network of interconnecting secondary openings--bedding-plane fractures and joints. Groundwater generally is unconfined in the shallower part of the aquifer and confined or semiconfined in the deeper part of the aquifer. The migration of VOCs from the Fischer and Porter Site source area is influenced by geologic and hydrologic controls. The hydrologic controls have changed with time. Stratigraphic units 2 and 3 crop out beneath the former Fischer and Porter plant. VOCs originating at the plant source area entered these stratigraphic units and moved downdip to the northwest. When the wells at and in the vicinity of the site were initially sampled in 1979-80, three public-supply wells (BK-366, BK-367, MG-946) and three industrial-supply wells (BK-368, BK-370, and BK-371) were pumping. Groundwater contaminated with VOCs flowed downdip and then northeast along strike toward well BK-366, downdip toward well BK-368, and downdip and then west along strike toward well MG-946. The long axis of the TCE plume is oriented about N. 18° W. in the direction of dip. In 1979-80, the leading edge of the plume was about 3,500 feet wide. With the cessation of pumping of the supply wells in 2004, the size of the plume has decreased. In 2007-09, the plume was approximately 2,000 feet long and 2,000 feet wide at the leading edge. On the western side of the site, TCE and tetrachloroethylene (PCE) appear to be moving downdip though stratigraphic unit 3. The downdip extent of TCE and PCE migration extended approximately 550 feet off-site to the northwest and 750 feet off-site to the north. TCE concentrations in water samples from wells at the western site boundary increased from 1996 to 2007. On the northern side of the site, TCE and PCE appeared to be moving downward and laterally though stratigraphic units 2, 3, and 4. Groundwater-flow directions shifted to the northwest in the intermediate and deep zones after cessation of pumping of well BK-366 in 2004. The shutdown of the Warminster Heights wells had little effect on the direction of groundwater flow in the shallow zone. In 2007, TCE concentrations measured in water samples from the three remediation wells by the USGS ranged from less than 340 to 3,000 µg/L, and PCE concentrations ranged from less than 8.4 to 51 µg/L. TCE concentrations in water samples from the source-area remediation wells have decreased with time but remain highly variable. From 2001 to 2008, the TCE and PCE concentrations in water samples from wells BK-370 and BK-371 showed a linear decreasing trend. TCE and PCE concentrations in water samples from well BK-1324 showed an exponentially decreasing trend. In 2007, TCE concentrations measured in water samples from shallow wells ranged from less than 0.1 to 14,000 µg/L, and PCE concentrations ranged from less than 0.1 to 340 µg/L. The TCE and PCE plumes followed the hydraulic gradient in the shallow zone. In 2007, TCE concentrations measured in water samples from on-site intermediate-depth monitor wells ranged from less than 0.1 to 500 µg/L, and PCE concentrations ranged from 1.3 to 28 µg/L. The TCE and PCE plumes followed the hydraulic gradient in the intermediate zone and extended off-site to the north and northwest of the source area. Concentrations of TCE in water samples north and west of the source area increased from 1996 to 2007. In 2007, the TCE concentrations measured in water samples from on-site monitor wells in the deep zone ranged from 1.1 to 86 µg/L, and PCE concentrations ranged from less than 0.1 to 8.4 µg/L. The TCE and PCE plumes generally followed the hydraulic gradient in the deep zone and extended off-site to the northwest of the source area. In general, concentrations of TCE in water samples from monitor wells outside the source area increased between 1996 and 2005 and decreased between 2005 and 2007; concentrations were less in 2007 than in 1996.

Pennsylvania↗

Geologic, hydrologic, and water-quality data from multiple-well monitoring sites in the Bunker Hill and Yucaipa Groundwater Subbasins, San Bernardino County, California, 1974–2016

In 1974, the U.S. Geological Survey (USGS), in cooperation with the San Bernardino Valley Municipal Water District, initiated a study to assess the regional groundwater resources in the Bunker Hill Subbasin of the Upper Santa Ana Valley Groundwater Basin in San Bernardino County, California. The study area expanded east into the Yucaipa Subbasin in 1996. This report compiles the geologic (borehole lithology and geophysical logs) and hydrologic (water-quality and water-level) data collected from 1974–2016 for 11 multiple-well monitoring sites (48 individual wells) constructed by the USGS in the Bunker Hill (7 sites) and Yucaipa (4 sites) Groundwater Subbasins. Approximately 240 water-quality samples from the 11 sites were analyzed for constituents including major and minor ions, nutrients, selected trace elements, organic wastewater compounds (OWCs), volatile organic compounds (VOCs), pesticides and pesticide degradates, the stable isotopes of hydrogen, oxygen, and nitrogen, and the radiogenic isotopes of tritium and carbon-14. All environmental data associated with these sites are available on the project web page for the San Bernardino Optimal Basin Management study ( https://ca.water.usgs.gov/sanbern/ ) and the Yucaipa Valley Hydrogeology study ( https://ca.water.usgs.gov/yucaipa/ ). Quality-assurance blank samples were processed periodically throughout the study and show that approximately 2.4 percent of the analytical results for major and minor ions, trace elements, and nutrients, and 1.5 percent of the results for VOCs fall below the acceptable study reporting limits and therefore are censored.

California↗

Images of Kilauea East Rift Zone eruption, 1983-1993

This CD-ROM disc contains 475 scanned photographs from the U.S. Geological Survey Hawaii Observatory Library. The collection represents a comprehensive range of the best photographic images of volcanic phenomena for Kilauea's East Rift eruption, which continues as of September 1995. Captions of the images present information on location, geologic feature or process, and date. Short documentations of work by the USGS Hawaiian Volcano Observatory in geology, seismology, ground deformation, geophysics, and geochemistry are also included, along with selected references. The CD-ROM was produced in accordance with the ISO 9660 standard; however, it is intended for use only on DOS-based computer systems.

Data Series↗

Seamounts and ferromanganese crusts within and near the U.S. EEZ off California - Data for RV Farnella cruise F7-87-SC

The purpose of this report is to present and briefly describe ship-board and laboratory data for a U.S. Geological Survey (USGS) research cruise aboard the RV Farnella that took place December 3-21, 1987 (cruise F7-87-SC). The purpose of the cruise was to survey seamounts and ferromanganese crusts within and near the U.S. Exclusive Economic Zone (EEZ) off California. Eight seamounts were studied - Rodriguez, San Marcos, Adam, Hoss, Little Joe, Ben, Flint, and Jasper. A geophysical survey of Jasper Seamount took place, but that seamount was not sampled; whereas Adam and Hoss Seamounts were sampled, but not surveyed with geophysics lines.

California↗

Chuckwalla Valley multiple-well monitoring site, Chuckwalla Valley, Riverside County

The U.S. Geological Survey (USGS), in cooperation with the Bureau of Land Management, is evaluating the geohydrology and water availability of the Chuckwalla Valley, California. As part of this evaluation, the USGS installed the Chuckwalla Valley multiple-well monitoring site (CWV1) in the southeastern portion of the Chuckwalla Basin. Data collected at this site provide information about the geology, hydrology, geophysics, and geochemistry of the local aquifer system, thus enhancing the understanding of the geohydrologic framework of the Chuckwalla Valley. This report presents construction information for the CWV1 multiple-well monitoring site and initial geohydrologic data collected from the site.

California↗

Multiple-well monitoring site adjacent to the North and South Belridge Oil Fields, Kern County, California

The U.S. Geological Survey (USGS), in cooperation with the California State Water Resources Control Board, is evaluating several questions about oil and gas development and groundwater resources in California, including (1) the location of groundwater resources; (2) the proximity of oil and gas operations to groundwater and the geologic materials between them; (3) evidence (or no evidence) of fluids from oil and gas sources in groundwater; and (4) the pathways or processes responsible when fluids from oil and gas sources are present in groundwater (U.S. Geological Survey, 2017). As part of this evaluation, the USGS installed a multiple-well monitoring site in the southern San Joaquin Valley groundwater basin adjacent to the North and South Belridge oil fields, about 7 miles southwest of Lost Hills, California. Data collected at the Belridge multiple-well monitoring site (BWSD) provide information about the geology, hydrology, geophysical properties, and geochemistry of the aquifer system, thus enhancing understanding of relations between adjacent groundwater and the North and South Belridge oil fields in an area where there are few groundwater data. This report presents construction information for the BWSD and initial hydrogeologic data collected from the site. A similar site installed to the east of the Lost Hills oil field, 11.5 miles to the north of the BWSD site, was described by Everett and others (2020a).

California↗

Hydrology of the Claiborne aquifer and interconnection with the Upper Floridan aquifer in southwest Georgia

The U.S. Geological Survey conducted a study, in cooperation with the Georgia Environmental Protection Division, to define the hydrologic properties of the Claiborne aquifer and evaluate its connection with the Upper Floridan aquifer in southwest Georgia. The effort involved collecting and compiling hydrologic data from the aquifer in subarea 4 of southwestern Georgia. Data collected for this study include borehole geophysical logs in 7 wells, and two 72-hour aquifer tests to determine aquifer properties. The top of the Claiborne aquifer extends from an altitude of about 200 feet above the North American Vertical Datum of 1988 (NAVD 88) in Terrell County to 402 feet below NAVD 88 in Decatur County, Georgia. The base of the aquifer extends from an altitude of about 60 feet above NAVD 88 in eastern Sumter County to about 750 feet below NAVD 88 in Decatur County. Aquifer thickness ranges from about 70 feet in eastern Early County to 400 feet in Decatur County. The transmissivity of the Claiborne aquifer, determined from two 72-hour aquifer tests, was estimated to be 1,500 and 700 feet squared per day in Mitchell and Early Counties, respectively. The storage coefficient was estimated to be 0.0006 and 0.0004 for the same sites, respectively. Aquifer test data from Mitchell County indicate a small amount of leakage occurred during the test. Groundwater-flow models suggest that the source of the leakage was the underlying Clayton aquifer, which produced about 2.5 feet of drawdown in response to pumping in the Claiborne aquifer. The vertical hydraulic conductivity of the confining unit between the Claiborne and Clayton aquifers was simulated to be about 0.02 foot per day. Results from the 72-hour aquifer tests run for this study indicated no interconnection between the Claiborne and overlying Upper Floridan aquifers at the two test sites. Additional data are needed to monitor the effects that increased withdrawals from the Claiborne aquifer may have on future water resources.

Georgia↗