SEARCH · Geology Reports

Results for “Interfaces”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65Linked to original sources

USGS1997

Environment of ore deposition in the creede mining district, San Juan Mountains, Colorado: Part V. Epithermal mineralization from fluid mixing in the OH vein

Detailed fluid inclusion studies on coarse-grained sphalerite from the OH vein, Creede, Colorado, have shown that the abrupt color changes between growth zones correspond to abrupt changes in the nature of the ore fluids. Within each growth zone, however, the composition of the fluids remained constant. The base of a distinctive orange-brown growth zone marks a sharp increase in both temperature and salinity relative to the preceding yellow-white zone. The orange-brown growth zone can be correlated along much of the vein and is believed to represent a time-stratigraphic interval. Along the vein, temperatures and salinities of fluid inclusions within this interval show a systematic decrease from about 285??C and 11.5 wt percent NaCl equiv near the base of the vein to about 250??C and 8 wt percent NaCl equiv, respectively, near the top of the vein. The iron concentration of this sphalerite growth zone shows a similar pattern, decreasing from about 2.8 to 1.2 mole percent FeS. When plotted on an enthalpy-salinity diagram, the fluid inclusion data define a spatial trend indicating the progressive mixing of deeply circulating hydrothermal brines with overlying, dilute ground waters. The hydrothermal brines entered the OH vein from below at a temperature, salinity, and density of approximately 285??C, 11.5 wt percent NaCl equiv, and 860 kg/m3, respectively, whereas the overlying ground waters appear to have been preheated to roughly 150??C and had an assumed salinity of 0 wt percent and a density of 920 kg/m3. The greater density of the heated ground water promoted mixing with the hydrothermal brine within the open fractures, causing sphalerite deposition. Although there were also episodes of boiling during vein mineralization, boiling appears unimportant for this sphalerite. Isotopic evidence and geochemical modeling studies also indicate that mixing was the depositional mechanism for sphalerite. An important aspect of the mixing hydrology of the Creede system involves an aquitard overlying the OH vein. This low permeability zone restricted the flow of ground water into the vein from above and forced the upwelling hydrothermal fluids to flow laterally along the vein. The mixing environment thus occurred along the interface between a deeply circulating hydrothermal convection cell and a topographically driven shallow ground-water system.

Economic Geology↗

USGS1997

Element distribution patterns in the ordovician Galena group, Southeastern Minnesota: Indicators of fluid flow and provenance of terrigenous material

As part of a regional geochemical investigation of lower Paleozoic strata in the Hollandale embayment of southeastern Minnesota, elemental concentrations in acid-insoluble residues were determined for carbonate rock in the Middle Ordovician Galena Group. Elemental distribution patterns within the insoluble residues, particularly those of Ti, Al, and Zr, show that the Wisconsin dome and the Wisconsin arch, which contributed sediment to the embayment prior to Galena time, continued as weak sources of sediment during this period. In contrast, trace metals commonly associated with Mississippi Valley-type lead-zinc mineralization, including Pb, Zn, Cu, Ag, Ni, Co, As, and Mo, show dispersal patterns that are independent of those associated with primary depositional phenomena. These trace metals are concentrated in southern Minnesota in carbonate rocks near the interface between limestone- and dolostone-dominated strata. Dispersal patterns imply that the metals were carried by a north-flowing regional ground-water system. The results show that the geochemical attributes of insoluble residues can be used to distinguish provenance and transport directions of primary sediments within a depositional basin from effects of subsequent regional ground-water flow systems.

Economic Geology↗

USGS2007

Crossing disciplines and scales to understand the critical zone

The Critical Zone (CZ) is the system of coupled chemical, biological, physical, and geological processes operating together to support life at the Earth's surface. While our understanding of this zone has increased over the last hundred years, further advance requires scientists to cross disciplines and scales to integrate understanding of processes in the CZ, ranging in scale from the mineral-water interface to the globe. Despite the extreme heterogeneities manifest in the CZ, patterns are observed at all scales. Explanations require the use of new computational and analytical tools, inventive interdisciplinary approaches, and growing networks of sites and people.

Elements↗

USGS2016

Where is the hot rock and where is the ground water— Using CSAMT to map beneath and around Mount St. Helens

We have observed several new features in recent controlled-source audio-frequency magnetotelluric (CSAMT) soundings on and around Mount St. Helens, Washington State, USA. We have identified the approximate location of a strong electrical conductor at the edges of and beneath the 2004–08 dome. We interpret this conductor to be hot brine at the hot-intrusive-cold-rock interface. This contact can be found within 50 meters of the receiver station on Spine 5, which extruded between April and July of 2005. We have also mapped separate regional and glacier-dome aquifers, which lie one atop the other, out to considerable distances from the volcano.

Washington↗

USGS1969

Flow of a disperse emulsion of crude oil in water in porous media

It has been suggested that oil migrates through reservoir sands in the form of a fine, disperse emulsion of oil in water, and that oil accumulations occur where the stream enters finer-grained rock such as silt or shale. In order to investigate the possible mechanisms, stable emulsions of oil in water were prepared without the use of wetting agents. They consisted of droplets 1/2 to 1-1/2 microns in diameter, in a concentration of 20 to 40 parts of oil per million of water. These emulsions passed freely through filter paper and ordinary passed freely through filter paper and ordinary sand. A plastic tube containing glass beads of 200-microns diameter included a bed 1/2-cm thick of crushed beads 37 to 88 microns in diameter. When the emulsion was passed through this tube, up to 80 percent of the oil was screened out at the coarse-fine interface. The amount removed depended on the contrast in grain size, the nature and the preferential wettability of the media. Similar results occurred when quartz sand was used as the coarse, and crushed sand as the fine medium. This screening did not occur as a result of capillary effects., because the pores were many times the diameter of the droplets. The oil collected as a result of flocculation of the droplets into strings and clusters., and the oil saturation in the pores consisted of masses of droplets with very little coalescence. Possibly electrostatic forces are more important Possibly electrostatic forces are more important than capillary in the behavior of fine, disperse, oil-in-water emulsions. our current ideas on multiphase flow in porous media may not apply to disperse emulsions.

Conference Paper↗

USGS1997

Kansas geological survey's Digital Petroleum Atlas (DPA) project

The Kansas Digital Petroleum Atlas (DPA) is a new approach to generating and publishing petroleum reservoir, field, play and basin studies. Atlas products are available anywhere in the world using a standard point-and-click World-Wide-Web interface. All information and technology in the DPA can be accessed, manipulated and downloaded in order to provide efficient transfer of the technology for client-defined solutions. The DPA design provides a dynamic product that is constantly evolving through new information structures, the latest research results, and incorporation of additional data. Through complete and flexible user access to both interpretative products and underlying reservoir and well data, the DPA significantly alters the relationship between research results, data access, and the transfer of technology.

Proceedings - SPE Annual Technical Conference and ↗

USGS2008

Determination of dominant biogeochemical processes in a contaminated aquifer-wetland system using multivariate statistical analysis

Determining the processes governing aqueous biogeochemistry in a wetland hydrologically linked to an underlying contaminated aquifer is challenging due to the complex exchange between the systems and their distinct responses to changes in precipitation, recharge, and biological activities. To evaluate temporal and spatial processes in the wetland-aquifer system, water samples were collected using cm-scale multi-chambered passive diffusion samplers (peepers) to span the wetland-aquifer interface over a period of 3 yr. Samples were analyzed for major cations and anions, methane, and a suite of organic acids resulting in a large dataset of over 8000 points, which was evaluated using multivariate statistics. Principal component analysis (PCA) was chosen with the purpose of exploring the sources of variation in the dataset to expose related variables and provide insight into the biogeochemical processes that control the water chemistry of the system. Factor scores computed from PCA were mapped by date and depth. Patterns observed suggest that (i) fermentation is the process controlling the greatest variability in the dataset and it peaks in May; (ii) iron and sulfate reduction were the dominant terminal electron-accepting processes in the system and were associated with fermentation but had more complex seasonal variability than fermentation; (iii) methanogenesis was also important and associated with bacterial utilization of minerals as a source of electron acceptors (e.g., barite BaSO 4 ); and (iv) seasonal hydrological patterns (wet and dry periods) control the availability of electron acceptors through the reoxidation of reduced iron-sulfur species enhancing iron and sulfate reduction.

Journal of Environmental Quality↗

USGS2015

Importance of the colmation layer in the transport and removal of cyanobacteria, viruses, and dissolved organic carbon during natural lake-bank filtration

This study focused on the importance of the colmation layer in the removal of cyanobacteria, viruses, and dissolved organic carbon (DOC) during natural bank filtration. Injection-and-recovery studies were performed at two shallow (0.5 m deep), sandy, near-shore sites at the southern end of Ashumet Pond, a waste-impacted, kettle pond on Cape Cod, MA, that is subject to periodic blooms of cyanobacteria and continuously recharges a sole-source drinking-water aquifer. The experiment involved assessing the transport behaviors of bromide (conservative tracer), Synechococcus sp. IU625 (cyanobacterium, 2.6 ± 0.2 µm), AS-1 (tailed cyanophage, 110 nm long), MS2 (coliphage, 26 nm diameter), and carboxylate-modified microspheres (1.7 µm diameter) introduced to the colmation layer using a bag-and-barrel (Lee-type) seepage meter. The injectate constituents were tracked as they were advected across the pond water–groundwater interface and through the underlying aquifer sediments under natural-gradient conditions past push-point samplers placed at &sim;30-cm intervals along a 1.2-m-long, diagonally downward flow path. More than 99% of the microspheres, IU625, MS2, AS-1, and &sim;44% of the pond DOC were removed in the colmation layer (upper 25 cm of poorly sorted bottom sediments) at two test locations characterized by dissimilar seepage rates (1.7 vs. 0.26 m d −1 ). Retention profiles in recovered core material indicated that >82% of the attached IU625 were in the top 3 cm of bottom sediments. The colmation layer was also responsible for rapid changes in the character of the DOC and was more effective (by three orders of magnitude) at removing microspheres than was the underlying 20-cm-thick segment of sediment.

Massachusetts↗

USGS1985

Geophysical techniques for reconnaissance investigations of soils and surficial deposits in mountainous terrain

Two techniques were assessed for their capabilities in reconnaissance studies of soil characteristics: depth to the water table and depth to bedrock beneath surficial deposits in mountainous terrain. Ground-penetrating radar had the best near-surface resolution in the upper 2 m of the profile and provided continuous interpretable imagery of soil profiles and bedrock surfaces. Where thick colluvium blankets side slopes, the GPR could not consistently define the bedrock interface. In areas with clayey or shaley sediments, the GPR is also more limited in defining depth and is less reliable. Seismic refraction proved useful in determining the elevation of the water table and depth to bedrock, regardless of thickness of overlying material, but could not distinguish soil-profile characteristics.

Soil Science Society of America Journal↗

USGS2008

Measuring the electrical properties of soil using a calibrated ground-coupled GPR system

Traditional methods for estimating vadose zone soil properties using ground penetrating radar (GPR) include measuring travel time, fitting diffraction hyperbolae, and other methods exploiting geometry. Additional processing techniques for estimating soil properties are possible with properly calibrated GPR systems. Such calibration using ground-coupled antennas must account for the effects of the shallow soil on the antenna's response, because changing soil properties result in a changing antenna response. A prototype GPR system using ground-coupled antennas was calibrated using laboratory measurements and numerical simulations of the GPR components. Two methods for estimating subsurface properties that utilize the calibrated response were developed. First, a new nonlinear inversion algorithm to estimate shallow soil properties under ground-coupled antennas was evaluated. Tests with synthetic data showed that the inversion algorithm is well behaved across the allowed range of soil properties. A preliminary field test gave encouraging results, with estimated soil property uncertainties (????) of ??1.9 and ??4.4 mS/m for the relative dielectric permittivity and the electrical conductivity, respectively. Next, a deconvolution method for estimating the properties of subsurface reflectors with known shapes (e.g., pipes or planar interfaces) was developed. This method uses scattering matrices to account for the response of subsurface reflectors. The deconvolution method was evaluated for use with noisy data using synthetic data. Results indicate that the deconvolution method requires reflected waves with a signal/noise ratio of about 10:1 or greater. When applied to field data with a signal/noise ratio of 2:1, the method was able to estimate the reflection coefficient and relative permittivity, but the large uncertainty in this estimate precluded inversion for conductivity. ?? Soil Science Society of America.

Conference Paper↗

USGS2018

Filtering of cyclic period infiltration in a layered vadose zone: 1. Approximation of damping and time lags

Core Ideas We describe an approximation for filtering of periodic infiltration in layered soil. Transitions in soil‐water properties between soil layers affect the filtering. Errors are smaller in soils where changes in soil‐water properties are small. Infiltration and downward percolation of water in the vadose zone are important processes that can define the availability of water resources. We present an approach that provides insight into how periodic infiltration forcings at the land surface filter in a layered vadose zone in terms of changes in the timing and magnitude of hydrologic responses. To represent geologically realistic systems, we used vertical sequences of one‐dimensional periodic solutions, where each solution represents a single soil in a layered profile. The overall approach is based on a linearized Richards equation and assumes that the effects on flow of continuous pressure head changes at soil interfaces are negligible. We evaluated the limit of these approximations by comparison with results from the numerical model HYDRUS‐1D, which uses the full Richards equation. We compared (i) the depth at which flux variations became steady, and (ii) the travel time of wetting fronts to reach a depth of 3 m. The solution was reasonably accurate (error less than a factor of 2) for infiltration cycles with periods from 30 to 365 d and for fluxes common in arid and semiarid environments (0–2 mm d −1 ). Lag times between a surface forcing and response at any depth were accurate (error less than a factor of 1.1). The approximation generally provided consistent estimates of the damping and time lag, such that it overestimated the depths where fluxes were steady and underestimated the time for a forcing to reach a specific depth.

Vadose Zone Journal↗

USGS2006

Identifying the effects of petrologic processes in a closed basaltic system using trace element concentrations in olivines and glasses: Implications for comparative planetology

We use trace-element concentrations in olivines and glasses from a closed basaltic system to identify the effects of petrologic processes on the trace-element record of that system. The closed basaltic system in question is the Makaopuhi Lava Lake (MLL), which is closed with respect to magma mixing. Detailed studies of this lava lake have provided important information about system variables and petrologic processes that have been measured and observed at the lake. These previous studies show that olivine crystallized from the lava lake at all stages of the lake’s evolution, which means that olivine and residual glasses contain a record of the lake’s petrologic history. We use this information, in conjunction with variations in trace-element concentrations in olivines and glasses, to show that mineral crystallization, gravitational settling, convective flow, filter pressing, and mineral-melt interface kinetics have characteristic effects on the trace element record of a closed basaltic system. These results are pertinent to the field of comparative planetology because they can be used to evaluate petrologic information in small samples from other planetary bodies, where information about system variables and/or petrologic processes is limited.

Hawaii↗

USGS2011

Anatomy of a metabentonite: Nucleation and growth of illite crystals and their coalescence into mixed-layer illite/smectite

The illite layer content of mixed-layer illite/smectite (I/S) in a 2.5 m thick, zoned, metabentonite bed from Montana decreases regularly from the edges to the center of the bed. Traditional X-ray diffraction (XRD) pattern modeling using Markovian statistics indicated that this zonation results from a mixing in different proportions of smectite-rich R0 I/S and illite-rich R1 I/S, with each phase having a relatively constant illite layer content. However, a new method for modeling XRD patterns of I/S indicates that R0 and R1 I/S in these samples are not separate phases (in the mineralogical sense of the word), but that the samples are composed of illite crystals that have continuous distributions of crystal thicknesses, and of 1 nm thick smectite crystals. The shapes of these distributions indicate that the crystals were formed by simultaneous nucleation and growth. XRD patterns for R0 and R1 I/S arise by interparticle diffraction from a random stacking of the crystals, with swelling interlayers formed at interfaces between crystals from water or glycol that is sorbed on crystal surfaces. It is the thickness distributions of smectite and illite crystals (also termed fundamental particles, or Nadeau particles), rather than XRD patterns for mixed-layer I/S, that are the more reliable indicators of geologic history, because such distributions are composed of well-defined crystals that are not affected by differences in surface sorption and particle arrangements, and because their thickness distribution shapes conform to the predictions of crystal growth theory, which describes their genesis.

Montana↗

USGS2015

Progress on water data integration and distribution: a summary of select U.S. Geological Survey data systems

Critical water-resources issues ranging from flood response to water scarcity make access to integrated water information, services, tools, and models essential. Since 1995 when the first water data web pages went online, the U.S. Geological Survey has been at the forefront of water data distribution and integration. Today, real-time and historical streamflow observations are available via web pages and a variety of web service interfaces. The Survey has built partnerships with Federal and State agencies to integrate hydrologic data providing continuous observations of surface and groundwater, temporally discrete water quality data, groundwater well logs, aquatic biology data, water availability and use information, and tools to help characterize the landscape for modeling. In this paper, we summarize the status and design patterns implemented for selected data systems. We describe how these systems contribute to a U.S. Federal Open Water Data Initiative and present some gaps and lessons learned that apply to global hydroinformatics data infrastructure.

Journal of Hydroinformatics↗

USGS2012

Initiation of long-term coupled microbiological, geochemical, and hydrological experimentation within the seafloor at North Pond, western flank of the Mid-Atlantic Ridge

Integrated Ocean Drilling Program (IODP) Expedition 336 successfully initiated subseafloor observatory science at a young mid-ocean-ridge flank setting. All of the drilled sites are located in the North Pond region of the Atlantic Ocean (22°45′N, 46°05′W) in 4414–4483 m water depth. This area is known from previous ocean drilling and site survey investigations as a site of particularly vigorous circulation of seawater in permeable 8 Ma basaltic basement underlying a <300 m thick sedimentary pile. Understanding how this seawater circulation affects microbial and geochemical processes in the uppermost basement was the primary science objective of Expedition 336. Basement was cored and wireline-logged in Holes U1382A and U1383C. Upper oceanic crust in Hole U1382A, which is only 50 m west of Deep Sea Drilling Project (DSDP) Hole 395A, recovered 32 m of core between 110 and 210 meters below seafloor (mbsf). Core recovery in basement was 32%, yielding a number of volcanic flow units with distinct geochemical and petrographic characteristics. A unit of sedimentary breccia containing clasts of basalt, gabbroic rocks, and mantle peridotite was found intercalated between two volcanic flow units and was interpreted as a rock slide deposit. From Hole U1383C we recovered 50.3 m of core between 69.5 and 331.5 mbsf (19%). The basalts are aphyric to highly plagioclase-olivine-phyric tholeiites that fall on a liquid line of descent controlled by olivine fractionation. They are fresh to moderately altered, with clay minerals (saponite, nontronite, and celadonite), Fe oxyhydroxide, carbonate, and zeolite as secondary phases replacing glass and olivine to variable extents. In addition to traditional downhole logs, we also used a new logging tool for detecting in situ microbial life in ocean floor boreholes—the Deep Exploration Biosphere Investigative tool (DEBI-t). Sediment thickness was ~90 m at Sites U1382 and U1384 and varied between 38 and 53 m at Site U1383. The sediments are predominantly nannofossil ooze with layers of coarse foraminiferal sand and occasional pebble-size clasts of basalt, serpentinite, gabbroic rocks, and bivalve debris. The bottommost meters of sections cored with the advanced piston corer feature brown clay. Extended core barrel coring at the sediment/ basement interface recovered <1 m of brecciated basalt with micritic limestone. Sediments were intensely sampled for geochemical pore water analyses and microbiological work. In addition, high-resolution measurements of dissolved oxygen concentration were performed on the whole-round sediment cores Major strides in ridge-flank studies have been made with subseafloor borehole observatories (CORKs) because they facilitate combined hydrological, geochemical, and microbiological studies and controlled experimentation in the subseafloor. During Expedition 336, two fully functional observatories were installed in two newly drilled holes (U1382A and U1383C) and an instrument and sampling string were placed in an existing hole (395A). Although the CORK wellhead in Hole 395A broke off and Hole U1383B was abandoned after a bit failure, these holes and installations are intended for future observatory science targets. The CORK observatory in Hole U1382A has a packer seal in the bottom of the casing and monitors/samples a single zone in uppermost oceanic crust extending from 90 to 210 mbsf. Hole U1383C was equipped with a three-level CORK observatory that spans a zone of thin basalt flows with intercalated limestone (~70–146 mbsf), a zone of glassy, thin basaltic flows and hyaloclastites (146–200 mbsf), and a lowermost zone (~200–331.5 mbsf) of more massive pillow flows with occasional hyaloclastites in the upper part.

Integrated Ocean Drilling Program: Preliminary Rep↗

USGS2021

Leveraging existing technology: Developing a trusted digital repository for the U.S. Geological Survey

As Federal Government agencies in the United States pivot to increase access to scientific data (Sheehan, 2016), the U.S. Geological Survey (USGS) has made substantial progress (Kriesberg et al., 2017). USGS authors are required to make federally funded data publicly available in an approved data repository (USGS, 2016b). This type of public data product, known as a USGS data release, serves as a method for publishing reviewed and approved data. In this paper, we present major milestones in the approach the USGS took to transition an existing technology platform to a Trusted Digital Repository. We describe both the technical and the non-technical actions that contributed to a successful outcome.We highlight how initial workflows revealed patterns that were later automated, and the ways in which assessments and user feedback influenced design and implementation. The paper concludes with lessons learned, such as the importance of a community of practice, application programming interface (API)-driven technologies, iterative development, and user-centered design. This paper is intended to offer a potential roadmap for organizations pursuing similar goals.

International Journal of Digital Curation↗

USGS2024

Examining inter-regional and intra-seasonal differences in wintering waterfowl landscape associations among Pacific and Atlantic flyways

The Central Valley of California (CVC) and Mid-Atlantic (MA) in the U.S. are both critical sites for nationwide food security (California Poultry Federation 2016, Prosser et al. 2017), and many waterfowl species annually, especially during the winter, providing feeding and roosting locations for a variety of species. Mapping waterfowl distributions, using NEXRAD, may aid in the adaptive management of important waterfowl habitat and allow various government agencies to better understand the interface between wild and domestic birds and commercial agricultural practices. We used 9 years (2014–2023) of data from the US NEXRAD network to model winter waterfowl relative abundance in the CVC and MA as a function of weather, temporal period, environmental conditions, and landcover characteristics using Boosted Regression Tree modelling. We were able to quantify the variability in effect size of 28 different covariates across space and time within two geographic regions which are critical to nationwide waterfowl management and host a high density of nationally important commercial agriculture. In general, weather, geographic (distance to features), and landcover condition (wetness index) predictors had the strongest relative effect on predicting wintering waterfowl relative abundance in both regions, while effects of land cover composition were more regionally and temporally specific. Increased daily mean temperature was a major predictor of increasing relative waterfowl abundance in both regions throughout the winter. Increasing precipitation had differing effects within regions, increasing relative waterfowl abundance in the MA, while decreasing in general within the CVC. Increasing relative waterfowl abundance in the CVC are strongly tied to the flooding of the landscape and rice availability, whereas waterfowl in the MA, where water is less limiting, are generally governed by waste grain availability and emergent wetland on the landscape. Waterfowl relative abundance in the MA was generally higher nearer to the Atlantic coast and lakes, while in the CVC they were higher nearer to lakes. Our findings promote a better understanding of spatial associations of waterfowl to landscape features and may aid in conservation and biosecurity management protocols.

Authorea↗

USGS1989

Retention and transport of nutrients in a third-order stream in northwestern California; hyporheic processes

Chloride and nitrate were coinjected into the surface waters of a third—order stream for 20 d to examine solute retention, and the fate of nitrate during subsurface transport. A series of wells (shallow pits) 0.5—10 m from the adjacent channel were sampled to estimate the lateral interflow of water. Two subsurface return flows beneath the wetted channel were also examined. The conservative tracer (chloride) was hydrologically transported to all wells. Stream water was >88% of flow in wells <4 m from the wetted channel. The lowest percentage of stream water was 47% at a well 10 m perpendicular to the stream. Retention of solutes was greater in the hyporheic zone than in the channel under summer low—flow conditions. Nominal travel time (the interval required for chloride concentration to reach 50% of the plateau concentration) was variable by well location, indicating different flow paths and presumably permeability differences in subsurface gravels. Nominal travel time was M 24 h for wells <5 m from the wetted channel. Coinjected nitrate was not conservative. Two wells were significantly (P < .05) higher in nitrate—N than would be predicted from chloride, while four were significantly lower. Wells 2.0—4.0 m from the wetted channel tended to have higher nitrate concentration than predicted, whereas nitrate sink locations tended to have transport distances >4.3 m. The capacity of the hyporheic zone for transient solute storage and as potential biological habitat varies with channel morphology, bed roughness, and permeability. A conceptual model that considers the groundwater—stream water interface as the fluvial boundary is proposed. Emerging paradigms of the riverine network should consider the hyporheic zone and associated nutrient cycling as an integral component of fluvial structure and function.

Ecology↗