Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geophysical Investigations Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65Linked to original sources
USGS1960

The chief oxide-burgin area discoveries, East Tintic district, Utah; A case history

In 1955 exploration for base and precious metals was undertaken by Bear Creek Mining Company immediately north of the Main Tintic district , Utah . During the course of this work Bear Creek became interested in the East Tintic district , primarily as a result of the activities of the U.S. Geological Survey in that area . Data published on the East Tintic district by the Survey and others were studied and map data made available from various mining companies were compiled. Preliminary economic studies were made to determine the present day value of the type of ore body discovered previously in the district . Encouraging results from these investigations led to the selection of specific targets for exploration. Recommendations for a project program were made and approved. Negotiations were successfully concluded in mid-1956 for a unit lease agreement on lands in the East Tintic district owned by the Tintic Standard and Chief Consolidated mining companies and their subsidiaries. Of the targets selected for exploration, the Chief Oxide area seemed to be one of the most prominent. Our preliminary work in the Chief Oxide area corroborated the findings of the U.S. Geological Survey described in Part I of this paper. After careful consideration it was decided to gamble the cost of an exploration shaft in this area for the purpose of providing an underground drilling platform. We also hoped by means of underground workings to establish the existence and nature of the postulated fault. A limited amount of surface drilling was done prior to shaft sinking in order to locate a shaft site and also to obtain additional information of subvolcanic structure and alteration. Underground exploration in the Chief Oxide area was started in January, 1957. The Burgin shaft was sunk to a depth of 1,100 feet and by August, 1959, lateral development on the 1050 level totaled 4,721 feet and underground diamond drilling totaled 15,480 feet. Results of the work done to date are as follows: ( a ) Identification of the sedimentary rock section and an interpretation of the structure in the Burgin mine area . (b) Discovery by penetration of the previously postulated East Tintic thrust fault. (c) Discovery of large zones of manganese oxides and carbonates, which were found to be closely related to silver-lead-zinc mineralization. (d) Discovery of ore-grade lead-zinc mineralization within the footwall rocks of the East Tintic thrust. (e) Discovery of high-grade silver-lead ore within the thrust zone. Insofar as ore localization is concerned the most important structural feature in the Burgin mine area is the East Tintic thrust fault- a fact that opens up new ore potential over a large part of the East Tintic district not previously explored. Although the discoveries to date must be attributed essentially to the application of geology to exploration, the tools of geochemical prospecting and geophysics were also used, and the geochemical work, in particular, was found to be a definite aid in the selection of areas for further exploration.

Utah↗
USGS2007

Abstracts of the Annual Meeting of Planetary Geologic Mappers, Tucson, AZ 2007

Introduction Report of the Annual Mappers Meeting Planetary Science Institute Tucson, Arizona June 28 and 29, 2007 Approximately 22 people attended this year's mappers meeting, and many more submitted abstracts and maps in absentia. The 2007 meeting was convened by Tracy Gregg, Les Bleamaster, Steve Saunders, and Ken Tanaka and was hosted by David Crown and Les Bleamaster of the Planetary Science Institute (PSI) in Tucson, Arizona. Oral presentations and poster discussions took place on Thursday, June 28 and Friday, June 29. This year's meeting also included a unique opportunity to visit the operations centers of two active Mars missions; field trips to the University of Arizona took place on Thursday and Friday afternoons. Outgoing Geologic Mapping Subcommittee (GEMS) chairperson, Tracy Gregg, commenced the meeting with an introduction and David Crown followed with a discussion of logistics and the PSI facility; Steve Saunders (Planetary Geology and Geophysics Discipline Scientist) then provided a brief program update. Science presentations kicked off with Venus mapper Vicki Hansen and graduate students Eric Tharalson and Bhairavi Shankar of the University of Minnesota, Duluth, showing a 3-D animation of the global distribution of tesserae and discussing the implications, a progress report for V-45 quadrangle mapping, and a brief discussion of circular lows. Les Bleamaster (PSI) followed with a progress report on mapping of the V-50 quadrangle and the 1:10M Helen Planitia quadrangle. David Crown (PSI) concluded the Venus presentations with a discussion of progress made on the V-30 quadrangle. The remainder of Thursday's presentations jumped around the Solar System including Mars, Io, and Earth. Ken Tanaka of the U.S. Geological Survey (USGS) began the afternoon with a general discussion of the status of the planetary mapping program at USGS. Buck Janes (University of Arizona) provided background information about the Mars Odyssey Gamma Ray Spectrometer (GRS) and presented some new element maps, which may be useful for geologic mapping. Dave Williams of Arizona State University reported on the progress of his global Io map and James Dohm (University of Arizona) discussed results of terrestrial remote mapping studies. Thursday afternoon, the mappers were given a tour of the High Resolution Imaging Science Experiment (HiRISE) operations facility and were given some basic information about how the images are obtained, processed, and publicly released. With official GEMS transition completed at lunch on Thursday, incoming GEMS chair Leslie Bleamaster took the reigns of Friday's meeting. Science presentations began with Ken Tanaka discussing 1:20M-scale global and 1:2M-scale polar mapping of Mars. Jim Zimbelman (Smithsonian Institution) described his 1:1M Medusae Fossae map (MC-8 SE), which is nearing completion, and new mapping (MC-16 NW and MC-23 NW) to further evaluate the Medusae Fossae. Brent Garry, also of the Smithsonian Institution, presented work on Ascraeus Mons. Peter Mouginis-Mark (University of Hawai`i) reported progress on his 1:200K and larger maps of Tooting crater and of the Olympus Mons summit caldera. Laszlo Keszthelyi (USGS) presented mapping of Athabasca Valles, with much of the credit going to Windy Jaeger. Jim Skinner (USGS) introduced a new mapping project including nine MTM quadrangles in the Utopia Planitia region. Tracy Gregg finished off the day's science presentations with discussion of Hesperia Planum. After discussion was complete, the group once again traveled to the University of Arizona - this time for a tour of the Mars Phoenix operations center. Principal Investigator Peter Smith beamed as he led mappers through the multi-million dollar facility. A main topic of discussion throughout the entire meeting was that of nomenclature, specifically how to classify the individual depressions at the tops of volcanoes. Paterae, as has been used for Mars, Venus, and Io, was suggested, but i

Open-File Report↗
USGS2022

Mapping the altitude of the top of the Dockum Group and paleochannel analysis using surface geophysical methods on and near Cannon Air Force Base in Curry County, New Mexico, 2020

The hydrogeology on and near Cannon Air Force Base (AFB) in eastern New Mexico was assessed to gain a better understanding of preferential groundwater flow paths through paleochannels. In and near the study area, paleochannels incised the top surface of the Dockum Group (Chinle Formation) and were subsequently filled in with electrically resistive coarse-grained sediments of the overlying Ogallala Formation, resulting in a preferential groundwater flow path in the form of a paleochannel network. A better understanding of the spatial characteristics of this preferential groundwater flow path is needed to support ongoing efforts to remediate groundwater contamination at Cannon AFB. Therefore, the U.S. Geological Survey, in cooperation with the U.S. Air Force Civil Engineer Center, used surface geophysical resistivity methods and data compiled from previous studies to better understand the spatial distribution and characteristics of the paleochannel network incised into the top of the Dockum Group. Previous studies have shown these paleochannels incised into the top of the Dockum Group with increasing resolution, but limited borehole data on and near Cannon AFB continued to make accurately mapping the top of Dockum Group challenging. For this study, surface geophysical resistivity measurements in the form of time-domain electromagnetic soundings made by the U.S. Geological Survey were used in conjunction with data previously published by Architecture, Engineering, Construction, Operations, and Management and borehole data compiled from the New Mexico Water Rights Reporting System database to prepare an updated map of the top of the Dockum Group that includes the location and characteristics of paleochannels incised into the top of the Dockum Group (Chinle Formation). A total of 149 borehole picks (determinations of the tops and bases of geologic units and their hydrogeologic-unit equivalents) were obtained from previous studies, along with 72 additional borehole picks from the New Mexico Water Rights Reporting System database and 43 picks from newly collected time-domain electromagnetic soundings. The data were gridded and contoured using Oasis Montaj v. 9.8.1. The updated map of the top of Dockum Group has many areas of uncertainty greater than 20 feet, because there are not enough data for the gridding process to reliably determine a value. However, this interpretation of the altitude of the top of the Dockum Group represents a substantial improvement in data resolution compared to previous studies. Two methodologies were used to evaluate paleochannels incised in the top of the Dockum Group across the study area: (1) trend-removal grid analysis and (2) analysis with Esri’s ArcMap Hydrology toolset. These two paleochannel analysis techniques show groundwater flow direction as well as areas having the deepest saturated thickness. Hydrologically, these techniques show where aquifer storage is highest (in the deepest parts of the paleochannel network), as well as the spatial distribution of preferential groundwater flow paths (the paleochannels). The analyses indicate a large paleochannel trending to the southeast, with smaller channels feeding in from the west. Areas where groundwater management could be more beneficial are indicated by locations where these flow lines intersect the deeper parts of the paleochannel.

New Mexico↗
USGS2007

Hydrology of Polk County, Florida

Local water managers usually rely on information produced at the State and regional scale to make water-resource management decisions. Current assessments of hydrologic and water-quality conditions in Polk County, Florida, commonly end at the boundaries of two water management districts (South Florida Water Management District and the Southwest Florida Water Management District), which makes it difficult for managers to determine conditions throughout the county. The last comprehensive water-resources assessment of Polk County was published almost 40 years ago. To address the need for current countywide information, the U.S. Geological Survey began a 3?-year study in 2002 to update information about hydrologic and water-quality conditions in Polk County and identify changes that have occurred. Ground-water use in Polk County has decreased substantially since 1965. In 1965, total ground-water withdrawals in the county were about 350 million gallons per day. In 2002, withdrawals totaled about 285 million gallons per day, of which nearly 95 percent was from the Floridan aquifer system. Water-conservation practices mainly related to the phosphate-mining industry as well as the decrease in the number of mines in operation in Polk County have reduced total water use by about 65 million gallons per day since 1965. Polk County is underlain by three principal hydrogeologic units. The uppermost water-bearing unit is the surficial aquifer system, which is unconfined and composed primarily of clastic deposits. The surficial aquifer system is underlain by the intermediate confining unit, which grades into the intermediate aquifer system and consists of up to two water-bearing zones composed of interbedded clastic and carbonate rocks. The lowermost hydrogeologic unit is the Floridan aquifer system. The Floridan aquifer system, a thick sequence of permeable limestone and dolostone, consists of the Upper Floridan aquifer, a middle semiconfining unit, a middle confining unit, and the Lower Floridan aquifer. The Upper Floridan aquifer provides most of the water required to meet demand in Polk County. Data from about 300 geophysical and geologic logs were used to construct hydrogeologic maps showing the tops and thicknesses of the aquifers and confining units within Polk County. Thickness of the surficial aquifer system ranges from several feet thick or less in the extreme northwestern part of the county and along parts of the Peace River south of Bartow to more than 200 feet along the southern part of the Lake Wales Ridge in eastern Polk County. Thickness of the intermediate aquifer system/intermediate confining unit is highly variable throughout the county because of past erosional processes and sinkhole formation. Thickness of the unit ranges from less than 25 feet in the extreme northwestern part of the county to more than 300 feet in southwestern Polk County. The altitude of the top of the Upper Floridan aquifer in the county ranges from about 50 feet above National Geodetic Vertical Datum of 1929 (NGVD 29) in the northwestern part to more than 250 feet below NGVD 29 in the southern part. Water levels in the Upper Floridan aquifer fluctuate seasonally, increasing during the wet season (June through September) and decreasing during the rest of the year. Water levels in the Upper Floridan aquifer also can change from year to year, depending on such factors as pumpage and climatic variations. In the southwestern part of the county, fluctuations in water use related to phosphate mining have had a major impact on ground-water levels. Hydrographs of selected wells in southwestern Polk County show a general decline in water levels that ended in the mid-1970s. This water-level decline coincides with an increase in water use associated with phosphate mining. A substantial increase in water levels that began in the mid-1970s coincides with a period of decreasing water use in the county. Despite reductions in water use since 1970, howev

Scientific Investigations Report↗
USGS2006

Distribution of stress drop, stiffness, and fracture energy over earthquake rupture zones

Using information provided by slip models and the methodology of McGarr and Fletcher (2002), we map static stress drop, stiffness (k = ????/u, where ???? is static stress drop and u is slip), and fracture energy over the slip surface to investigate the earthquake rupture process and energy budget. For the 1994 M6.7 Northridge, 1992 M7.3 Landers, and 1995 M6.9 Kobe earthquakes, the distributions of static stress drop show strong heterogeneity, emphasizing the importance of asperities in the rupture process. Average values of static stress drop are 17, 11, and 4 Mpa for Northridge, Landers, and Kobe, respectively. These values are substantially higher than estimates based on simple crack models, suggesting that the failure process involves the rupture of asperities within the larger fault zone. Stress drop as a function of depth for the Northridge and Landers earthquakes suggests that stress drops are limited by crustal strength. For these two earthquakes, regions of high slip are surrounded by high values of stiffness. Particularly for the Northridge earthquake, the prominent patch of high slip in the central part of the fault is bordered by a ring of high stiffness and is consistent with expectations based on the failure of an asperity loaded at its edge due to exterior slip. Stiffness within an asperity is inversely related to its dimensions. Estimates of fracture energy, based on static stress drop, slip, and rupture speed, were used to investigate the nature of slip weakening at four locations near the hypocenter of the Kobe earthquake for comparison with independent results based on a dynamic model of this earthquake. One subfault updip and to the NE of the hypocenter has a fracture energy of 1.1 MJ/m2 and a slip-weakening distance, Dc, of 0.66 m. Right triangles, whose base and height are Dc and the dynamic stress drop, respectively, approximately overlie the slip-dependent stress given by Ide and Takeo (1997) for the same locations near the hypocenter. The total fracture energy for the Kobe earthquake, 3.7 ?? 1014 J, is about the same as the seismic energy (Ea = 3.2 ?? 1014 J.

Journal of Geophysical Research B: Solid Earth↗
USGS2007

Hydrostratigraphic Framework and Selection and Correlation of Geophysical Log Markers in the Surficial Aquifer System, Palm Beach County, Florida

The surficial aquifer system is the major source of freshwater for public water supply in Palm Beach County, Florida, yet many previous studies of the hydrogeology of this aquifer system have focused only on the eastern one-half to one-third of the county in the more densely populated coastal area (Land and others, 1973; Swayze and others, 1980; Swayze and Miller, 1984; Shine and others, 1989). Population growth in the county has resulted in the westward expansion of urbanized areas into agricultural areas and has created new demands on the water resources of the county. Additionally, interest in surface-water resources of central and western areas of the county has increased. In these areas, plans for additional surface-water storage reservoirs are being made under the Comprehensive Everglades Restoration Plan originally proposed by the U.S. Army Corps of Engineers and the South Florida Water Management District (1999), and stormwater treatment areas have been constructed by the South Florida Water Management District. Surface-water and ground-water interactions in the Everglades are thought to be important to water budgets, water quality, and ecology (Harvey and others, 2002). Most of the previous hydrogeologic and ground-water flow simulation studies of the surficial aquifer system have not utilized a hydrostratigraphic framework, in which stratigraphic or sequence stratigraphic units, such as those proposed in Cunningham and others (2001), are delineated in this stratigraphically complex aquifer system. A thick zone of secondary permeability mapped by Swayze and Miller (1984) was not subdivided and was identified as only being within the Anastasia Formation of Pleistocene age. Miller (1987) published 11 geologic sections of the surficial aquifer system, but did not delineate any named stratigraphic units in these sections. This limited interpretation has resulted, in part, from the complex facies changes within rocks and sediments of the surficial aquifer system and the seemingly indistinct and repetitious nature of the most common lithologies, which include sand, shell, sandstone, and limestone. Model construction and layer definition in a simulation of ground-water flow within the surficial aquifer system of Palm Beach County utilized only the boundaries of one or two major hydrogeologic zones, such as the Biscayne aquifer and surficial aquifer system; otherwise layers were defined by average elevations rather than geologic structure or stratigraphy (Shine and others, 1989). Additionally, each major permeable zone layer in the model was assumed to have constant hydraulic conductivity with no allowance for the possibility of discrete (thin) flow zones within the zone. The key to understanding the spatial distribution and hydraulic connectivity of permeable zones in the surficial aquifer system beneath Palm Beach County is the development of a stratigraphic framework based on a consistent method of county-wide correlation. Variability in hydraulic properties in the system needs to be linked to the stratigraphic units delineated in this framework, and proper delineation of the hydrostratigraphic framework should provide a better understanding and simulation of the ground-water flow system. In 2004, the U.S. Geological Survey, in cooperation with the South Florida Water Management District, initiated an investigation to develop a hydrostratigraphic framework for the surficial aquifer system in Palm Beach County.

Scientific Investigations Map↗
USGS2009

Geophysical Characterization of the Quaternary-Cretaceous Contact Using Surface Resistivity Methods in Franklin and Webster Counties, South-Central Nebraska

To help manage and understand the Platte River system in Nebraska, the Platte River Cooperative Hydrology Study (COHYST), a group of state and local governmental agencies, developed a regional ground-water model. The southern boundary of this model lies along the Republican River, where an area with insufficient geologic data immediately north of the Republican River led to problems in the conceptualization of the simulated flow system and to potential problems with calibration of the simulation. Geologic descriptions from a group of test holes drilled in south-central Nebraska during 2001 and 2002 indicated a possible hydrologic disconnection between the Quaternary-age alluvial deposits in the uplands and those in the Republican River lowland. This disconnection was observed near a topographic high in the Cretaceous-age Niobrara Formation, which is the local bedrock. In 2003, the U.S. Geological Survey, in cooperation with the COHYST, collected surface geophysical data near these test holes to better define this discontinuity. Two-dimensional imaging methods for direct-current resistivity and capacitively coupled resistivity were used to define the subsurface distribution of resistivity along several county roads near Riverton and Inavale, Nebraska. The relation between the subsurface distribution of resistivity and geology was defined by comparing existing geologic descriptions of test holes to surface-geophysical resistivity data along two profiles and using the information gained from these comparisons to interpret the remaining four profiles. In all of the resistivity profile sections, there was generally a three-layer subsurface interpretation, with a resistor located between two conductors. Further comparison of geologic data with the geophysical data and with surficial features was used to identify a topographic high in the Niobrara Formation near the Franklin Canal which was coincident with a resistivity high. Electrical properties of the Niobrara Formation made accurate interpretation of the resistivity profile sections difficult and less confident because of similar resistivity of this formation and that of the coarser-grained sediment of the Quaternary-age deposits. However, distinct conductive features were identified within the resistivity profile sections that aided in delineating the contact between the resistive Quaternary-age deposits and the resistive Niobrara Formation. Using this information, an interpretive boundary was drawn on the resistivity profile sections to represent the contact between the Quaternary-age alluvial deposits and the Cretaceous-age Niobrara Formation. A digital elevation model (DEM) of the top of the Niobrara Formation was constructed using the altitudes from the interpreted contact lines. This DEM showed that the general trend of top of the Niobrara Formation dips to the southeast. At the north edge of the study site, the Niobrara Formation topographic high trends east-west with an altitude range of 559 meters in the west to 543 meters in the east. Based on the land-surface elevation and the Niobrara Formation DEM, the estimated thickness of the Quaternary-age alluvial deposits throughout the study area was mapped and showed a thinning of the Quaternary-age alluvial deposits to the north, approximately where the topographic high of the Niobrara Formation is located. This topographic high in the Niobrara Formation has the potential to act as a barrier to ground-water flow from the uplands alluvial aquifer to the Republican River alluvial aquifer as shown in the resistivity profile sections. The Quaternary-age alluvial deposits in the uplands and those in the Republican River Valley are not fully represented as disconnected because it is possible that there are ground-water flow paths that were not mapped during this study.

Scientific Investigations Report↗
USGS2008

Synthesis of the Hydrogeologic Framework of the Floridan Aquifer System and Delineation of a Major Avon Park Permeable Zone in Central and Southern Florida

The carbonate Floridan aquifer system of central and southern Florida (south of a latitude of about 29 degrees north) is an invaluable resource with a complex framework that has previously been mapped and managed primarily in a subregional context according to geopolitical boundaries. As interest and use of the Floridan aquifer system in this area increase, a consistent regional hydrogeologic framework is needed for effective management across these boundaries. This study synthesizes previous studies on the Floridan aquifer system and introduces a new regional hydrogeologic conceptual framework, linking physical relations between central and southern Florida and between the west and east coastal areas. The differences in hydrogeologic nomenclature and interpretation across the study area from previous studies were identified and resolved. The Floridan aquifer system consists of the Upper Floridan aquifer, middle confining unit, and Lower Floridan aquifer. This study introduces and delineates a new major, regional productive zone or subaquifer, referred to as the Avon Park permeable zone. This zone is contained within the middle confining unit and synthesizes an extensive zone that has been referred to differently in different parts of the study area in previous studies. The name of this zone derives from the description of this zone as the ?Avon Park highly permeable zone? in west-central Florida in a previous study. Additionally, this zone has been identified previously in southeastern Florida as the ?middle Floridan aquifer.? An approximately correlative or approximate time-stratigraphic framework was developed and was used to provide guidance in the identification and determination of aquifers, subaquifers, and confining units within the Floridan aquifer system and to determine their structural relations. Two stratigraphic marker horizons within the Floridan aquifer system and a marker unit near the top of the aquifer system were delineated or mapped. The marker horizons are correlative points in the stratigraphic section rather than a unit with upper and lower boundaries. The two marker horizons and the marker unit originated from previous studies, wherein they were based on lithology and correlation of geophysical log signatures observed in boreholes. The depths of these marker horizons and the marker unit were extended throughout the study area by correlation of natural gamma-ray logs between wells. The Floridan aquifer system includes, in ascending order, the upper part of the Cedar Keys Formation, Oldsmar Formation, Avon Park Formation, Ocala Limestone, Suwannee Limestone, and in some areas the lower part of the Hawthorn Group. The first marker horizon is in the lower part of the aquifer system near the top of the Oldsmar Formation and is associated with the top of distinctive glauconitic limestone beds that are present in some regions; the second marker horizon is near the middle of the aquifer system in the middle part of the Avon Park Formation. The marker unit lies at the top of a basal unit in the Hawthorn Group and provides a stratigraphic constraint for the top of the Floridan aquifer system. The marker horizons do not have distinguishing lithologic characteristics or a characteristic gamma-ray log pattern in all areas but are still thought to be valid because of correlation of the entire section and correlation of all sufficiently deep wells with gamma-ray logs. The Avon Park permeable zone is contained entirely within the Avon Park Formation; its position within the section is either near the middle Avon Park marker horizon or within a thick part of the section that extends several hundred feet above the marker horizon. This subaquifer is present over most of the study area and characteristically consists of thick units of dolostone and interbedded limestone, and limestone in its upper part. Permeability is primarily associated with fracturing. This subaquifer is well developed in west-cen

Scientific Investigations Report↗
USGS1998

Paleoseismic investigations in the Santa Cruz mountains, California: Implications for recurrence of large-magnitude earthquakes on the San Andreas fault

Trenching, microgeomorphic mapping, and tree ring analysis provide information on timing of paleoearthquakes and behavior of the San Andreas fault in the Santa Cruz mountains. At the Grizzly Flat site alluvial units dated at 1640–1659 A.D., 1679–1894 A.D., 1668–1893 A.D., and the present ground surface are displaced by a single event. This was the 1906 surface rupture. Combined trench dates and tree ring analysis suggest that the penultimate event occurred in the mid-1600 s, possibly in an interval as narrow as 1632–1659 A.D. There is no direct evidence in the trenches for the 1838 or 1865 earthquakes, which have been proposed as occurring on this part of the fault zone. In a minimum time of about 340 years only one large surface faulting event (1906) occurred at Grizzly Flat, in contrast to previous recurrence estimates of 95–110 years for the Santa Cruz mountains segment. Comparison with dates of the penultimate San Andreas earthquake at sites north of San Francisco suggests that the San Andreas fault between Point Arena and the Santa Cruz mountains may have failed either as a sequence of closely timed earthquakes on adjacent segments or as a single long rupture similar in length to the 1906 rupture around the mid-1600 s. The 1906 coseismic geodetic slip and the late Holocene geologic slip rate on the San Francisco peninsula and southward are about 50–70% and 70% of their values north of San Francisco, respectively. The slip gradient along the 1906 rupture section of the San Andreas reflects partitioning of plate boundary slip onto the San Gregorio, Sargent, and other faults south of the Golden Gate. If a mid-1600 s event ruptured the same section of the fault that failed in 1906, it supports the concept that long strike-slip faults can contain master rupture segments that repeat in both length and slip distribution. Recognition of a persistent slip rate gradient along the northern San Andreas fault and the concept of a master segment remove the requirement that lower slip sections of large events such as 1906 must fill in on a periodic basis with smaller and more frequent earthquakes.

Journal of Geophysical Research B: Solid Earth↗
USGS1981

Significant results from using earth observation satellites for mineral and energy resource exploration

A large number of Earth-observation satellites orbit our world several times each day, providing new information about the land and sea surfaces and the overlying thin layer of atmosphere that makes our planet unique. Meteorological satellites have had the longest history of experimental use and most are now considered operational. The geologic information collected by the Landsat, Polar Orbiting Geophysical Observatory (POGO), Magsat, Heat Capacity Mapping Mission (HCMM) and Seasat land and ocean observation systems is being thoroughly tested, and some of these systems are now approaching operational use. Landsat multispectral images provide views of large areas of the Earth under uniform lighting conditions and can be obtained at a variety of scales and formats. Not only do the Landsat data provide highly useful images showing surficial materials and structures such as folds and faults, but also measurements and computer-derived ratios of the brightness of different rock types, alteration zones, and mineral associations. These data have led to the finding of a variety of new ore deposits. In addition, the combination of Landsat digital data and aeromagnetic data has extended the use of Landsat as an exploration tool which can be used to readily relate surface features to subsurface anomalies. Magsat data, now being collected, are helping refine information on major crustal anomalies that were first recognized during the analysis of POGO data. The more nearly circular orbit, lower altitude, and increased sophistication of its vector magnetometer enable Magsat to provide more precise information than POGO. Information of this type is required to develop crustal models. Although Magsat is designed to operate for only 4–8 months, the number of orbits that it should be able to make will be sufficient to accomplish its mission and to record a major magnetic storm expected in 1980. HCMM is a two-band visible to near-IR (0.55–1.1 μm) and thermal infrared (10.2–12.5 μm) system designed to measure reflected solar energy, determine the heat capacity of rocks and to monitor soil moisture, thermal effluents, plant canopy temperatures and snow cover. Launched in April 1978, it is in sun-synchronous, circular orbit at an altitude of 620 km. It is a relatively low-resolution system with an instantaneous field of view (IFOV) of 500–600 m and a swath width of 716 km. However, the system is designed to detect objects in the range of 260°–340° K with a sensitivity (NEδT) of 0.4°K at 280°. Recording the thermal radiation of urban heat islands and high thermal inertia of quartzite strata in the Appalachian region are two examples of its land applications. Launched in June 1978, Seasat operated for only 100 days, but successfully acquired much information over both sea and land. The collection of synthetic aperture radar (SAR) imagery and radar altimetry was particularly important to geologists. Although there are difficulties in processing and distributing these data in a timely manner, initial evaluations indicate that the radar imagery supplements Landsat data by increasing the spectral range and offering a different look angle. The radar altimeter provides accurate profiles over narrow strips of land (1 km wide) and has demonstrated usefulness in measuring icecap surfaces (Greenland, Iceland, and Antarctica). The Salar of Uyuni in southern Bolivia served as a calibration site for the altimeter and has enabled investigators to develop a land-based smoothing algorithm that is believed to increase the accuracy of the system to 10 cm. Data from the altimeter are currently being used to measure subsidence resulting from ground water withdrawal in the Phoenix-Tucson area.

Advances in Space Research↗
USGS2001

Surface-geophysical characterization of ground-water systems of the Caloosahatchee River basin, southern Florida

The Caloosahatchee River Basin, located in southwestern Florida, includes about 1,200 square miles of land. The Caloosahatchee River receives water from Lake Okeechobee, runoff from the watershed, and seepage from the underlying ground-water systems; the river loses water through drainage to the Gulf of Mexico and withdrawals for public-water supply and agricultural and natural needs. Water-use demands in the Caloosahatchee River Basin have increased dramatically, and the Caloosahatchee could be further stressed if river water is used to accommodate restoration of the Everglades. Water managers and planners need to know how much water will be used within the river basin and how much water is contributed by Lake Okeechobee, runoff, and ground water. In this study, marine seismic-reflection and ground-penetrating radar techniques were used as a means to evaluate the potential for flow between the river and ground-water systems. Seven test coreholes were drilled to calibrate lithostratigraphic units, their stratal geometries, and estimated hydraulic conductivities to surface-geophysical profiles. A continuous marine seismic-reflection survey was conducted over the entire length of the Caloosahatchee River and extending into San Carlos Bay. Lithostratigraphic units that intersect the river bottom and their characteristic stratal geometries were identified. Results show that subhorizontal reflections assigned to the Tamiami Formation intersect the river bottom between Moore Haven and about 9 miles westward. Oblique and sigmoidal progradational reflections assigned to the upper Peace River Formation probably crop out at the floor of the river in the Ortona area between the western side of Lake Hicpochee and La Belle. These reflections image a regional-scale progradational deltaic depositional system containing quartz sands with low to moderate estimated hydraulic conductivities. In an approximate 6-mile length of the river between La Belle and Franklin Lock, deeper karstic collapse structures are postulated. These structures influence the geometries of parallel reflections that intersect the river channel. Here, reflections assigned to the Buckingham Limestone Member of the Tamiami Formation (a confining unit) and reflections assigned to the clastic zone of the sandstone aquifer likely crop out at the river bottom. Beneath these shallow reflections, relatively higher amplitude parallel reflections of the carbonate zone of the sandstone aquifer are well displayed in the seismic-reflection profiles. In San Carlos Bay, oblique progradational reflections assigned to the upper Peace River Formation are shown beneath the bay. Almost everywhere beneath the river, a diffuse ground-water flow system is in contact with the channel bottom. Ground-penetrating radar profiles of an area about 2 miles north of the depositional axis of the deltaic depositional system in the Ortona area show that progradational clinoforms imaged on seismic reflection profiles in the Caloosahatchee River are present within about 17 feet of the ground surface. Ground-penetrating radar profiles show southward dipping, oblique progradational reflections assigned to the upper Peace River Formation that are terminated at their tops by a toplapping or erosional discontinuity. These clinoformal reflections image clean quartz sand that is probably characterized by moderate hydraulic conductivity. This sand could be mapped using ground-penetrating radar methods.

Water-Resources Investigations Report↗
USGS2016

Regional chloride distribution in the Northern Atlantic Coastal Plain aquifer system from Long Island, New York, to North Carolina

The aquifers of the Northern Atlantic Coastal Plain are the principal source of water supply for the region’s nearly 20 million residents. Water quality and water levels in the aquifers, and maintenance of streamflow, are of concern because of the use of this natural resource for water supply and because of the possible effects of climate change and changes in land use on groundwater. The long-term sustainability of this natural resource is a concern at the local community scale, as well as at a regional scale, across state boundaries. In 2010, the U.S. Geological Survey (USGS) began a regional assessment of the Northern Atlantic Coastal Plain aquifers. An important part of this assessment is a regional interpretation of the extent of saltwater and the proximity of saltwater to fresh-groundwater resources and includes samples and published interpretations of chloride concentrations newly available since the last regional chloride assessment in 1989. This updated assessment also includes consideration of chloride samples and refined interpretations that stem from the 1994 discovery of the buried 35 million year old Chesapeake Bay impact structure that has substantially altered the understanding of the hydrogeologic framework and saltwater distribution in eastern Virginia. In this study, the regional area of concern for the chloride samples and interpretations extends from the Fall Line in the west to the outer edge of the Continental Shelf in the east and from the eastern tip of Long Island in the north to about halfway down the North Carolina coast in the south. Discussions of chloride distribution are presented for each of the 10 regional aquifer layers of the Northern Atlantic Coastal Plain, including the offshore extents. Maps of interpreted lines of equal concentration or isochlors were manually prepared for nine of the regional aquifers; a map was not prepared for the surficial regional aquifer. The isochlor interpretations include the offshore extent of the nine regional aquifers and are presented on a 1:2,000,000 scale base map. Vertically, the chloride samples and interpretations range from deepest (oldest) to shallowest (youngest)—Potomac-Patuxent, Potomac-Patapsco, Magothy, Matawan, Monmouth-Mount Laurel, Aquia, Piney Point, Lower Chesapeake, and Upper Chesapeake regional aquifers. The approach of this study maximizes the overall density of chloride information and data by assessing relevant published interpretations, all USGS chloride samples, and all relevant offshore samples in one comprehensive interpretation. Published isochlors, where they were interpreted by regional aquifer, were used as much as possible for this regional isochlor assessment. Publication dates for the isochlors used range from 1982 to 2015, and the scales for the isochlors range from local (county or municipality) to state (sub-regional) to regional. The USGS National Water Information System database provided well sample data for the parts of aquifers that are mainly beneath the land areas and yielded 37,517 water-quality records for 1903 through 2011. Published data reports from four phases of research-related offshore coring (1976, 1993, 1997, 2009) were the main source of water-quality data for the parts of aquifers from the shoreline to the outer edge of the Continental Shelf and yielded samples from multiple depths of each of 13 cores. This study also used interpretations and offshore core data from the last regional chloride assessment (1989) which, in addition to 7 offshore cores, included water-quality data from about 500 wells, and borehole geophysics interpretations from a subset of 11 wells. All published information and data that were used in this study were considered time independent and did not assess the published interpretations or data for temporal trends. The approach used here examined only published interpretations and available chloride data, and did not directly use supplemental techniques that can provide insight into the distribution of saltwater, such as geochemical characterization, borehole geophysical information, and geochronology. Isochlor maps for this study are limited to manual interpretations of the 250-milligram per liter (mg/L) and 10,000-mg/L boundaries developed for 9 of the 10 regional aquifers that constitute the regional hydrogeologic framework of the Northern Atlantic Coastal Plain. For a given aquifer, the approach was to initially consider published isochlor interpretations, where available, then to modify the published interpretations, if necessary, to the extent indicated by the well and core samples. The final step was to interpolate isochlors to the full extent of each aquifer layer in areas with sufficient samples or cited interpretations, or to extrapolate isochlors in areas with no samples or where samples were sparse. The principal limitation of this study is that, because of its regional extent, data and information density can vary greatly, and thus confidence in interpretations can vary widely for onshore and offshore areas across the study area. In areas of sparse data, some samples of elevated chloride could be misinterpreted as being part of a regional elevated chloride trend, and in other cases, an elevated concentration could be misinterpreted as being of only local importance. The interpretive work of this study was applied to a 1:2,000,000 scale base map. Locations of isochlors, wells, cores, political boundaries, and shorelines are meant to be considered approximate. The isochlors presented in this study were manually interpreted for each aquifer unit as a conceptual representation of an equal concentration line approximately in the middle of an aquifer’s thickness. Differences in chloride concentration lines between the top and bottom of an aquifer could be substantial, especially for the thick parts of aquifers, but that information is not presented in this regional assessment. Although additional offshore chloride data are available compared to 27 years ago (1989), the offshore information remains sparse, resulting in less confidence in the offshore interpretations than in the onshore interpretations. Regionally, the 250- and 10,000-mg/L isochlors tend to map progressively eastward from the deepest to the shallowest aquifers across the Northern Atlantic Coastal Plain aquifer system but with some exceptions. The additional data, conceptual understanding, and interpretations in the vicinity of the buried Chesapeake Bay impact structure in eastern Virginia resulted in substantial refinement of isochlors in that area. Overall, the interpretations in this study are updates of the previous regional study from 1989 but do not comprise major differences in interpretation and do not indicate regional movement of the freshwater-saltwater interface since then.

Delaware, Maryland, New Jersey, New York, North Ca↗
USGS2009

Estimation of Leakage Potential of Selected Sites in Interstate and Tri-State Canals Using Geostatistical Analysis of Selected Capacitively Coupled Resistivity Profiles, Western Nebraska, 2004

With increasing demands for reliable water supplies and availability estimates, groundwater flow models often are developed to enhance understanding of surface-water and groundwater systems. Specific hydraulic variables must be known or calibrated for the groundwater-flow model to accurately simulate current or future conditions. Surface geophysical surveys, along with selected test-hole information, can provide an integrated framework for quantifying hydrogeologic conditions within a defined area. In 2004, the U.S. Geological Survey, in cooperation with the North Platte Natural Resources District, performed a surface geophysical survey using a capacitively coupled resistivity technique to map the lithology within the top 8 meters of the near-surface for 110 kilometers of the Interstate and Tri-State Canals in western Nebraska and eastern Wyoming. Assuming that leakage between the surface-water and groundwater systems is affected primarily by the sediment directly underlying the canal bed, leakage potential was estimated from the simple vertical mean of inverse-model resistivity values for depth levels with geometrically increasing layer thickness with depth which resulted in mean-resistivity values biased towards the surface. This method generally produced reliable results, but an improved analysis method was needed to account for situations where confining units, composed of less permeable material, underlie units with greater permeability. In this report, prepared by the U.S. Geological Survey in cooperation with the North Platte Natural Resources District, the authors use geostatistical analysis to develop the minimum-unadjusted method to compute a relative leakage potential based on the minimum resistivity value in a vertical column of the resistivity model. The minimum-unadjusted method considers the effects of homogeneous confining units. The minimum-adjusted method also is developed to incorporate the effect of local lithologic heterogeneity on water transmission. Seven sites with differing geologic contexts were selected following review of the capacitively coupled resistivity data collected in 2004. A reevaluation of these sites using the mean, minimum-unadjusted, and minimum-adjusted methods was performed to compare the different approaches for estimating leakage potential. Five of the seven sites contained underlying confining units, for which the minimum-unadjusted and minimum-adjusted methods accounted for the confining-unit effect. Estimates of overall leakage potential were lower for the minimum-unadjusted and minimum-adjusted methods than those estimated by the mean method. For most sites, the local heterogeneity adjustment procedure of the minimum-adjusted method resulted in slightly larger overall leakage-potential estimates. In contrast to the mean method, the two minimum-based methods allowed the least permeable areas to control the overall vertical permeability of the subsurface. The minimum-adjusted method refined leakage-potential estimation by additionally including local lithologic heterogeneity effects.

Scientific Investigations Report↗
USGS2002

Crustal structure and relocated earthquakes in the Puget Lowland, Washington, from high-resolution seismic tomography

The availability of regional earthquake data from the Pacific Northwest Seismograph Network (PNSN), together with active source data from the Seismic Hazards Investigation in Puget Sound (SHIPS) seismic experiments, has allowed us to construct a new high-resolution 3-D, P wave velocity model of the crust to a depth of about 30 km in the central Puget Lowland. In our method, earthquake hypocenters and velocity model are jointly coupled in a fully nonlinear tomographic inversion. Active source data constrain the upper 10–15 km of the model, and earthquakes constrain the deepest portion of the model. A number of sedimentary basins are imaged, including the previously unrecognized Muckleshoot basin, and the previously incompletely defined Possession and Sequim basins. Various features of the shallow crust are imaged in detail and their structural transitions to the mid and lower crust are revealed. These include the Tacoma basin and fault zone, the Seattle basin and fault zone, the Seattle and Port Ludlow velocity highs, the Port Townsend basin, the Kingston Arch, and the Crescent basement, which is arched beneath the Lowland from its surface exposure in the eastern Olympics. Strong lateral velocity gradients, consistent with the existence of previously inferred faults, are observed, bounding the southern Port Townsend basin, the western edge of the Seattle basin beneath Dabob Bay, and portions of the Port Ludlow velocity high and the Tacoma basin. Significant velocity gradients are not observed across the southern Whidbey Island fault, the Lofall fault, or along most of the inferred location of the Hood Canal fault. Using improved earthquake locations resulting from our inversion, we determined focal mechanisms for a number of the best recorded earthquakes in the data set, revealing a complex pattern of deformation dominated by general arc-parallel regional tectonic compression. Most earthquakes occur in the basement rocks inferred to be the lower Tertiary Crescent formation. The sedimentary basins and the eastern part of the Olympic subduction complex are largely devoid of earthquakes. Clear association of hypocenters and focal mechanisms with previously mapped or proposed faults is difficult; however, seismicity, structure, and focal mechanisms associated with the Seattle fault zone suggest a possible high-angle mode of deformation with the north side up. We suggest that this deformation may be driven by isostatic readjustment of the Seattle basin.

Washington↗
USGS2001

Pond-aquifer interaction at South Pond of Lake Cochituate, Natick, Massachusetts

A U.S. Army facility on a peninsula in South Pond of Lake Cochituate was designated a Superfund site by the U.S. Environmental Protection Agency in 1994 because contaminated ground water was detected at the facility, which is near the Natick Springvale public-supply wellfield. The interaction between South Pond and the underlying aquifer controls ground-water flow patterns near the pond and determines the source of water withdrawn from the wellfield.A map of the bathymetry and the thickness of fine-grained pond-bottom sediments was prepared on the basis of fathometer, ground-penetrating radar, and continuous seismic-reflection surveys. The geophysical data indicate that the bottom sediments are fine grained toward the middle of the pond but are coarse grained in shoreline areas. Natick Springvale wellfield, which consists of three active public-supply wells adjacent to South Pond, is 2,200 feet downgradient from the boundary of the Army facility. That part of South Pond between the Natick Springvale wellfield and the Army facility is 18 feet deep with at least 14 feet of fine-grained sediment beneath the pond-bottom. Water levels from the pond and underlying sediments indicate a downward vertical gradient and the potential for infiltration of pond water near the wellfield. Head differences between the pond and the wellfield ranged from 1.66 to 4.41 feet during this study. The velocity of downward flow from South Pond into the pond-bottom sediments, determined on the basis of temperature profiles measured over a diurnal cycle at two locations near the wellfield, was 0.5 and 1.0 feet per day. These downward velocities resulted in vertical hydraulic conductivities of 1.1 and 2.9 feet per day for the pond-bottom sediments.Naturally occurring stable isotopes of oxygen and hydrogen were used as tracers of pond water and ground water derived from recharge of precipitation, two potential sources of water to a well in a pond-aquifer setting. The isotopic composition of pond water varied seasonally and was distinctly different from the isotopic composition of ground water. The isotopic composition of shallow water beneath and adjacent to South Pond near the wellfield corresponds to the temporal variation of pond water, indicating that nearly all water at shallow depths was derived from pond water. A two-component mixing model based on the average stable isotope values of the source waters indicated that 64 ?15 percent at the 95-percent confidence interval of the water withdrawn at the public-supply wells was derived from the pond; pond water accounted for most of the uncertainty in the result. The rate of infiltration of pond water into the aquifer and discharging to the wellfield was 1.0 million gallons per day at the average pumping rate.

Water-Resources Investigations Report↗
USGS2022

Potential effects of energy development on environmental resources of the Williston Basin in Montana, North Dakota, and South Dakota—Water resources

The Williston Basin has been a leading oil and gas producing area for more than 50 years. While oil production initially peaked within the Williston Basin in the mid-1980s, production rapidly increased in the mid-2000s, largely because of improved horizontal (directional) drilling and hydraulic fracturing methods. In 2012, energy development associated with the Bakken Formation was identified as a priority requiring collaboration toward improved timeliness of issuing permits for new wells combined with reasonable measures to maintain environmental quality. Shortly thereafter, the Bakken Federal Executive Group was created to address common challenges associated with energy development. The Bakken Federal Executive Group partner agencies identified a gap in current understanding of the cumulative environmental challenges attributed to energy development throughout the area, resulting in an effort to aggregate scientific data and identify additional research and information needs related to natural resources within areas of energy development in the Williston Basin. As part of this effort, water resources in the area (including groundwater; streams and rivers; and lakes, reservoirs, and wetlands) were characterized and described in terms of physical occurrence, flow characteristics, recharge, water quality, and water use. Similarly, waters produced during energy-development activities also were characterized even though these waters are not considered usable resources within the area. Groundwater resources were characterized by the major hydrogeologic units, or aquifers, identifying the units that supply most groundwater used for domestic, stock, agricultural, and industrial purposes. The groundwater characterization included other deeper hydrogeologic units in the Williston Basin that may be a useable source of water with treatment, have utility as a reservoir for reinjection of produced waters, or be a source of minerals and energy resources. A generalized groundwater budget and flow system identifying the sources of recharge (stream infiltration, precipitation, and movement [leakage] from other aquifers) and the general groundwater flow direction is included for each of the major hydrogeologic units. Rivers and streams within the Williston Basin with 10 or more years of continuous streamflow data were identified. For a subset of these sites, streamflow characteristics, including the monthly and annual mean flow, were generated to identify seasonal and interannual changes in streamflow and thus provide information on the drivers and reliability of streamflow at the seasonal or multiyear scale. Daily streamflow and annual extreme flows (peak and low flow) also were estimated for the subset of sites. The daily streamflow and annual extreme flow values provide information on short-term or extreme events that are relevant to infrastructure design and evaluating spills, leaks, or accidental discharges of water or petroleum products. Surface-water features (lakes, ponds, and wetlands) were classified using the Cowardin system and identified on the National Wetlands Inventory maps generated by the U.S. Fish and Wildlife Service. The spatial distribution of the surface-water features was analyzed by State, county, and specifically in comparison to the Prairie Pothole Region. The proximity of the surface-water features to energy development infrastructure (specifically oil or gas well pads) was evaluated. It was determined that, although oil or gas wells are often near a surface-water feature, most surface-water features do not have wells nearby, with the exception of wells in the Prairie Pothole Region. Water-quality data were aggregated from two data sources: (1) the Water-Quality Portal, sponsored by the U.S. Geological Survey (USGS), U.S. Environmental Protection Agency (EPA), and National Water Quality Monitoring Council; and (2) a data compilation completed as part of the USGS National Water-Quality Assessment project. The Water-Quality Portal integrates publicly available water-quality data from databases maintained by the USGS, EPA, and U.S. Department of Agriculture, including water-quality data from Tribal, State, and local databases. Water-quality data for 15 commonly measured water-quality constituents were aggregated for groundwater, rivers and streams, and lakes and reservoirs. For each aggregated dataset (groundwater, rivers and streams, and lakes and reservoirs), analyses of the water-quality data included summary statistics, maps of spatial distribution of constituent values, boxplots of constituent values by timeframe or hydrogeologic unit, spatial comparisons of site locations and constituent values to petroleum well density, and comparisons of the constituent values measured to EPA drinking-water standards/guidelines. Produced water includes all fluids brought to the surface along with the targeted hydrocarbons as part of the oil and gas exploration and extraction processes. These fluids may include formation water (waters that co-exist with rock/oil/gas), hydraulic fracturing fluids, and other combinations of water and chemicals used during oil and gas well drilling, development, treatments, recompletions, and workovers. Produced water datasets were aggregated from two sources: the USGS National Produced Waters Geochemical database (ver. 2.1) and a series of projects focused specifically on sampling produced water in the Williston Basin from 2010 to 2014. The National Produced Waters Geochemical database was useful for a general understanding of produced-water chemistry. Produced waters are characterized by extreme salinity and contain elevated concentrations of other constituents (including arsenic, barium, cadmium, lead, zinc, radium-226/radium-228, and ammonium) that could negatively affect water and aquatic resources if released. Produced waters also have a generally unique chemical (isotopic) signature that may be useful in tracking water from different geologic units; for example, the oxygen/deuterium and strontium ratio values measured in brine waters from the Bakken Formation are distinct from brines collected from other geologic units in the Williston Basin. Water-use information related to energy production in the area also was aggregated and summarized. The summary of water use is not limited to oil and gas production but includes water used to produce all types of energy resources in the Williston Basin, including coal/lignite, thermoelectric power, oil and gas, hydropower, biomass and biofuels, wind, geothermal, and solar. Each State has its own methods for regulating and reporting water usage within its jurisdiction. These methods can introduce problems when examining water use from sources, such as the Missouri River or Fox Hills aquifer, that are shared across political boundaries. Without the one-to-one match for usage types and amounts used from a water source, it is difficult to develop a comprehensive water budget for the water source being evaluated. A large amount of freshwater is required to prepare a well for oil and gas well production; in some cases, 3 to 7 million gallons of water are needed per well. The EPA estimates that hydraulic fracturing in the Williston Basin uses between 70 to 140 billion gallons per year. Water also is used for myriad other purposes related to ancillary oil and gas extraction. In addition to water used for immediate energy development, the expanded human workforce migrating into the area and other support staff who have moved into the area during the development also use water. Research and information needs were identified that could be relevant in the evaluation of the effects of energy development on water resources. Information needs related to the evaluation of groundwater resources include the following: improved potentiometric-surface maps for glacial units; availability of a uniform stream network digital geographic coverage that spans the international boundary with Canada; enhanced surface-water use information with regards to the gain and loss of streamflow to shallow groundwater, which would increase understanding groundwater and surface-water interactions; and expanded geophysical assessments. Gaps in the availability of streamflow data include the lack of information on ice-jam flooding despite potential for effects to infrastructure (pipelines, roads, and facilities) and an understanding of the cumulative effects of largely undocumented stock and diversion dams. Although this study resulted in the aggregation of a large quantity of water-quality data, the availability of consistently collected, systematically processed and reported data over large parts of the Williston Basin is sparse. Few samples have been analyzed for constituents that may indicate the effect of energy development on water resources. Constituents that could be considered include boron, chloride, bromide, iodine, fluoride, manganese, lithium, radium, strontium isotopes, volatile organic compounds, and isotopes of inorganic ions (such as hydrogen and carbon). Collaboration between Tribal, Federal, State, and local entities to identify a common study design, common monitoring constituents, and consistent sampling locations would generate datasets with broad utility and would likely result in overall cost savings for monitoring over time. Similarly, there is a need for standardized sample collection, processing, laboratory analytical methods, and the collection of ancillary data for produced waters sampling. Additional characterization of the range of chemical, microbial, and isotopic compositions and quantities of “end-member” produced waters, and the collection of time-series datasets to document the changes in produced waters during and after well development also were needs identified during this study. Water-use estimates would be improved through the implementation of comprehensive studies of water use from groundwater and surface-water sources using consistent methodologies across the Williston Basin. The submission of chemical and water data related to hydraulic fracturing collected by the oil and gas industry would add to the quantity of available data. Consistent implementation of regulations and monitoring controls across political boundaries (State, county, and international) would further improve the consistency of data available for the estimates of water use.

Montana, North Dakota, South Dakota↗
USGS2006

Geology, ground-water hydrology, geochemistry, and ground-water simulation of the Beaumont and Banning Storage Units, San Gorgonio Pass area, Riverside County, California

Ground water has been the only source of potable water supply for residential, industrial, and agricultural users in the Beaumont and Banning storage units of the San Gorgonio Pass area, Riverside County, California. Ground-water levels in the Beaumont area have declined as much as 100 feet between the early 1920s and early 2000s, and numerous natural springs have stopped flowing. In 1961, the San Gorgonio Pass Water Agency (SGPWA) entered into a contract with the California State Department of Water Resources to receive 17,300 acre-feet per year of water to be delivered by the California State Water Project (SWP) to supplement natural recharge. Currently (2005), a pipeline is delivering SWP water into the area, and the SGPWA is artificially recharging the ground-water system using recharge ponds located along Little San Gorgonio Creek in Cherry Valley with the SWP water. In addition to artificial recharge, SGPWA is considering the direct delivery of SWP water for the irrigation of local golf courses and for agricultural supply in lieu of ground-water pumpage. To better understand the potential hydrologic effects of different water-management alternatives on ground-water levels and movement in the Beaumont and Banning storage units, existing geohydrologic and geochemical data were compiled, new data from a basin-wide ground-water level and water-quality monitoring network were collected, monitoring wells were installed near the Little San Gorgonio Creek recharge ponds, geohydrologic and geochemical analyses were completed, and a ground-water flow simulation model was developed. The San Gorgonio Pass area was divided into several storage units on the basis of mapped or inferred faults. This study addresses primarily the Beaumont and Banning storage units. The geologic units in the study area were generalized into crystalline basement rocks and sedimentary deposits. The younger sedimentary deposits and the surficial deposits are the main water-bearing deposits in the San Gorgonio Pass area. The water-bearing deposits were divided into three aquifers: (1) the perched aquifer, (2) the upper aquifer, and (3) the lower aquifer based on lithologic and downhole geophysical logs. Natural recharge in the San Gorgonio Pass area was estimated using INFILv3, a deterministic distributed- parameter precipitation-runoff model. The INFILv3 model simulated that the potential recharge of precipitation and runoff in the Beaumont and Banning storage units was about 3,710 acre-feet per year and that the potential recharge in 28 sub-drainage basins upstream of the storage units was about 6,180 acre-feet per year. The water supply for the Beaumont and Banning storage units is supplied by pumping ground water from wells in the Canyon (Edgar and Banning Canyons), Banning Bench, Beaumont, and Banning storage units. Total annual pumpage from the Beaumont and Banning storage units ranged from about 1,630 acre-feet in 1936 to about 20,000 acre-feet in 2003. Ground-water levels declined by as much as 100 feet in the Beaumont storage unit from 1926-2003 in response to ground-water pumping of about 450,160 acre-feet during this period. Since ground-water development began in the San Gorgonio Pass area, there have been several sources of artificial recharge to the basin including return flow from applied water on crops, golf courses, and landscape; septic-tank seepage; and infiltration of storm runoff diversions and imported water into recharge ponds. Return flow from applied water and septic-tank seepage was estimated to reach a maximum of about 8,100 acre-feet per year in 2003. Owing to the great depth of water in much of study area (in excess of 150 feet), the return flow and septic-tank seepage takes years to decades to reach the water table. Stable-isotope data indicate that the source of ground-water recharge was precipitation from storms passing through the San Gorgonio Pass as opposed to runoff from the higher altitudes of the San Bernar

Scientific Investigations Report↗
USGS2001

Upper crustal structure in Puget Lowland, Washington: Results from the 1998 Seismic Hazards Investigation in Puget Sound

A new three-dimensional (3-D) model shows seismic velocities beneath the Puget Lowland to a depth of 11 km. The model is based on a tomographic inversion of nearly one million first-arrival travel times recorded during the 1998 Seismic Hazards Investigation in Puget Sound (SHIPS), allowing higher-resolution mapping of subsurface structures than previously possible. The model allows us to refine the subsurface geometry of previously proposed faults (e.g., Seattle, Hood Canal, southern Whidbey Island, and Devils Mountain fault zones) as well as to identify structures (Tacoma, Lofall, and Sequim fault zones) that warrant additional study. The largest and most important of these newly identified structures lies along the northern boundary of the Tacoma basin; we informally refer to this structure here as the Tacoma fault zone. Although tomography cannot provide information on the recency of motion on any structure, Holocene earthquake activity on the Tacoma fault zone is suggested by seismicity along it and paleoseismic evidence for abrupt uplift of tidal marsh deposits to its north. The tomography reveals four large, west to northwest trending low-velocity basins (Tacoma, Seattle, Everett, and Port Townsend) separated by regions of higher velocity ridges that are coincident with fault-bounded uplifts of Eocene Crescent Formation basalt and pre-Tertiary basement. The shapes of the basins and uplifts are similar to those observed in gravity data; gravity anomalies calculated from the 3-D tomography model are in close agreement with the observed anomalies. In velocity cross sections the Tacoma and Seattle basins are asymmetric: the basin floor dips gently toward a steep boundary with the adjacent high-velocity uplift, locally with a velocity "overhang" that suggests a basin vergent thrust fault boundary. Crustal fault zones grow from minor folds into much larger structures along strike. Inferred structural relief across the Tacoma fault zone increases by several kilometers westward along the fault zone to Lynch Cove, where we interpret it as a zone of south vergent faulting overthrusting Tacoma basin. In contrast, structural relief along the Seattle fault zone decreases west of Seattle, which we interpret as evidence that the N-S directed compression is being accommodated by slip transfer between the Seattle and Tacoma fault zones. Together, the Tacoma and Seattle fault zones raise the Seattle uplift, one of a series of east-west trending, pop-up structures underlying Puget Lowland from the Black Hills to the San Juan Islands.

Washington↗