Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geological & Geophysical Surveys”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65Linked to original sources
USGS2021

Completion summary for boreholes USGS 148, 148A, and 149 at the Materials and Fuels Complex, Idaho National Laboratory, Idaho

In 2019, the U.S. Geological Survey (USGS), in cooperation with the U.S. Department of Energy, drilled and constructed boreholes USGS 148A and USGS 149 for stratigraphic framework analyses and long-term groundwater monitoring of the eastern Snake River Plain aquifer at the Idaho National Laboratory (INL) in southeastern Idaho. Initially, boreholes USGS 148A and USGS 149 were continuously cored to allow the USGS and INL subcontractor to collect select geophysical and seismic data and evaluate properties of recovered core material. The USGS geophysical data and descriptions of core material are described in this report; however, data collected by the INL contractor, including seismic data, are not included as part of the report. The unsaturated zone at both borehole locations is relatively thick, depth to water was measured at approximately 663.6 feet (ft) below land surface (BLS) in USGS 148A, and at approximately 654.1 ft BLS at USGS 149. On completion of coring and data collection, both boreholes (USGS 148A and USGS 149) were repurposed as monitoring wells. Well USGS 148A was constructed to a depth of 759 ft BLS and instrumented with a dedicated submersible pump and measurement line; well USGS 149 was constructed to a depth of 974 ft BLS and instrumented with a multilevel monitoring system (Westbay TM ). Geophysical data, collected by the USGS, were used to characterize the subsurface geology and aquifer conditions. Natural gamma log measurements were used to assess sediment-layer thickness and location. Neutron and gamma-gamma source logs were used to confirm fractured and vesicular basalt identified for aquifer testing and multilevel monitoring well zone testing. Acoustic televiewer logs, collected for well USGS 149, were used to identify fractures and assess groundwater movement when compared with neutron measurements. Furthermore, gyroscopic deviation measurements were used to measure horizontal and vertical displacement for the constructed boreholes USGS 148A and USGS 149. A single-well aquifer test was done in well USGS 148A during November 6–7, 2019, to provide estimates of transmissivity and hydraulic conductivity. Estimates for transmissivity and hydraulic conductivity were 6.34×10 3 feet squared per day and 3.17 feet per day, respectively. The aquifer test was run overnight (21.3 hours) and measured drawdown was relatively small (0.09 ft) at sustained pumping rates ranging from 15.7 to 16.1 gallons per minute. The transmissivity estimates for well USGS 148A were slightly lower than those determined from previous aquifer tests for wells near the Materials and Fuels Complex, but well within range of other aquifer tests done at the INL. Water-quality samples, collected from well USGS 148A and from four zones in well USGS 149, were analyzed for cations, anions, metals, nutrients, volatile organic compounds, stable isotopes, and radionuclides. Water samples for most of the inorganic constituents showed similar chemistry in USGS 148A and all four zones in USGS 149. Water samples for stable isotopes of oxygen and hydrogen indicated some possible influence of irrigation on the water quality. Nitrate plus nitrite concentrations indicated influence from anthropogenic sources. The volatile organic compound and radiochemical data indicated that wastewater disposal practices at the Materials and Fuels Complex or from drilling had no detectable influence on these wells.

Idaho↗
USGS2020

Multiple-well monitoring site adjacent to the Lost Hills oil field, Kern County, California

The U.S. Geological Survey (USGS), in cooperation with the California State Water Resources Control Board, is evaluating several questions about oil and gas development and groundwater resources in California, including (1) the location of groundwater resources; (2) the proximity of oil and gas operations and groundwater and the geologic materials between them; (3) the location of evidence (or no evidence) of fluids from oil and gas sources in groundwater; and (4) the pathways or processes responsible when fluids from oil and gas sources are present in groundwater (U.S. Geological Survey, 2019). As part of this evaluation, the USGS installed a multiple-well monitoring site in the southern San Joaquin Valley near Lost Hills, California, adjacent to the Lost Hills oil field. Data collected at the Lost Hills multiple-well monitoring site (LHSP) provide information about the geology, hydrology, geophysics, and geochemistry of the aquifer system, thus enhancing understanding of relations between adjacent groundwater and the Lost Hills oil field in an area where there is little groundwater data. This report presents construction information for the LHSP and initial geohydrologic data collected from the site.

California↗
USGS2013

Geology, water-quality, hydrology, and geomechanics of the Cuyama Valley groundwater basin, California, 2008--12

To assess the water resources of the Cuyama Valley groundwater basin in Santa Barbara County, California, a series of cooperative studies were undertaken by the U.S. Geological Survey and the Santa Barbara County Water Agency. Between 2008 and 2012, geologic, water-quality, hydrologic and geomechanical data were collected from selected sites throughout the Cuyama Valley groundwater basin. Geologic data were collected from three multiple-well groundwater monitoring sites and included lithologic descriptions of the drill cuttings, borehole geophysical logs, temperature logs, as well as bulk density and sonic velocity measurements of whole-core samples. Generalized lithologic characterization from the monitoring sites indicated the water-bearing units in the subsurface consist of unconsolidated to partly consolidated sand, gravel, silt, clay, and occasional cobbles within alluvial fan and stream deposits. Analysis of geophysical logs indicated alternating layers of finer- and coarser-grained material that range from less than 1 foot to more than 20 feet thick. On the basis of the geologic data collected, the principal water-bearing units beneath the monitoring-well sites were found to be composed of younger alluvium of Holocene age, older alluvium of Pleistocene age, and the Tertiary-Quaternary Morales Formation. At all three sites, the contact between the recent fill and younger alluvium is approximately 20 feet below land surface. Water-quality samples were collected from 12 monitoring wells, 27 domestic and supply wells, 2 springs, and 4 surface-water sites and were analyzed for a variety of constituents that differed by site, but, in general, included trace elements; nutrients; dissolved organic carbon; major and minor ions; silica; total dissolved solids; alkalinity; total arsenic and iron; arsenic, chromium, and iron species; and isotopic tracers, including the stable isotopes of hydrogen and oxygen, activities of tritium, and carbon-14 abundance. Of the 39 wells sampled, concentrations of total dissolved solids and sulfate from 38 and 37 well samples, respectively, were greater than the U.S. Environmental Protection Agency’s secondary maximum contaminant levels. Concentrations greater than the maximum contaminant levels for nitrate were observed in five wells and were observed for arsenic in four wells. Differences in the stable-isotopic values of hydrogen and oxygen among groundwater samples indicated that water does not move freely between different formations or between different zones within the Cuyama Valley. Variations in isotopic composition indicated that recharge is derived from several different sources. The age of the groundwater, expressed as time since recharge, was between 600 and 38,000 years before present. Detectable concentrations of tritium indicated that younger water, recharged since the early 1950s, is present in parts of the groundwater basin. Hydrologic data were collected from 12 monitoring wells, 56 domestic and supply wells, 3 surface-water sites, and 4 rainfall-gaging stations. Rainfall in the valley averaged about 8 inches annually, whereas the mountains to the south received between 12 and 19 inches. Stream discharge records showed seasonal variability in surface-water flows ranging from no-flow to over 1,500 cubic feet per second. During periods when inflow to the valley exceeds outflow, there is potential recharge from stream losses to the groundwater system Water-level records included manual quarterly depth-to-water measurements collected from 68 wells, time-series data collected from 20 of those wells, and historic water levels from 16 wells. Hydrographs of the manual measurements showed declining water levels in 16 wells, mostly in the South-Main zone, and rising water levels in 14 wells, mostly in the Southern Ventucopa Uplands. Time-series hydrographs showed daily, seasonal, and longer-term effects associated with local pumping. Water-level data from the multiple-well monitoring sites indicated seasonal fluctuations as great as 80 feet and water-level differences between aquifers as great as 40 feet during peak pumping season. Hydrographs from the multiple-well groundwater monitoring sites showed vertical hydraulic gradients were upward during the winter months and downward during the irrigation season. Historic hydrographs showed water-level declines in the Southern-Main, Western Basin, Caliente Northern-Main, and Southern Sierra Madre zone ranging from 1 to 7 feet per year. Hydrographs of wells in the Southern Ventucopa Uplands zone showed several years with marked increases in water levels that corresponded to increased precipitation in the Cuyama Valley. Investigation of hydraulic properties included hydraulic conductivity and transmissivity estimated from aquifer tests performed on 63 wells. Estimates of horizontal hydraulic conductivity ranged from about 1.5 to 28 feet per day and decreased with depth. The median estimated hydraulic conductivity for the older alluvium was about five times that estimated for the Morales Formation. Estimates of transmissivity ranged from 560 to 163,400 gallons per day per foot and decreased with depth. The median estimated transmissivity for the younger alluvium was about three times that estimated for the older alluvium. Geomechanical analysis included land-surface elevation changes at five continuously operating global positioning systems (GPS) and land-subsidence detection at five interferometric synthetic aperture radar (InSAR) reference points. Analysis of data collected from continuously operating GPS stations showed the mountains to the south and west moved upward about 1 millimeter (mm) annually, whereas the station in the center of the Southern-Main zone moved downward more than 7 mm annually, indicating subsidence. It is likely that this subsidence is inelastic (permanent) deformation and indicates reduced storage capacity in the aquifer sediments. Analysis of InSAR data showed local and regional changes that appeared to be dependent, in part, on the time span of the interferogram, seasonal variations in pumping, and tectonic uplift. Long-term InSAR time series showed a total maximum detected subsidence rate of approximately 12 mm per year at one location and approximately 8 mm per year at a second location, while short-term InSAR time series showed maximum subsidence of about 15 mm at one location and localized maximum uplift of about 10 mm at another location.

California↗
USGS2002

Hydrogeology and simulation of ground-water flow in the aquifers underlying Belvidere, Illinois

The U.S. Geological Survey investigated the ground-water-flow system and distribution of contaminants in the vicinity of Belvidere, Illinois, during 1992?2000. The study included the compilation, collection, and analyses of hydrogeologic and water-quality data and simulation of the ground-water-flow system. Hydrogeologic data include lithologic, stratigraphic, geophysical, hydraulic-property, water-level, ground-water withdrawal, and streamflow data. Water-quality data include analyses of water samples primarily for volatile organic compounds (VOC?s) and selectively for tritium and inorganic constituents. Data were collected from about 250 wells and 21 surfacewater sites. These data were used (1) to describe the hydrogeologic framework of the ground-waterflow system, preferential pathways and directions of ground-water movement and contaminant distribution, ground-water/surface-water relations, and the water budget and (2) to develop and calibrate the ground-water-flow model. The glacial drift (sand and gravel with some clay) and Galena-Platteville (fractured dolomite) aquifers and the sandstone aquifers of the Cambrian-Ordovician aquifer system compose the ground-water-flow system underlying Belvidere and vicinity. The Glenwood confining unit separates the Galena-Platteville aquifer from the underlying sandstone aquifers. The Galena- Platteville aquifer and confining unit may be absent in parts of the Troy Bedrock Valley, about 1.5 miles west of Belvidere. Throughout the study area, the Kishwaukee River and its tributaries seem to be gaining flow from shallow ground-water discharge. Potentiometric levels in the glacial drift and Galena-Platteville aquifers range from about 900 feet above sea level in the upland areas to 740 feet along the Kishwaukee River. Estimated horizontal hydraulic conductivity of the glacial drift aquifer ranges from about 0.13 to 280 feet per day. The Galena-Platteville aquifer is a dual-porosity unit with the greatest percentage of flow through fractures and bedding-plane partings. Estimated horizontal hydraulic conductivity ranges from about 0.005 to 2,500 feet per day. Estimated horizontal hydraulic conductivity of the St. Peter aquifer (the uppermost sandstone aquifer of the Cambrian-Ordovician aquifer system ranges from about 4.7 to 17.5 feet per day. Volatile organic compounds have been detected in all aquifers underlying Belvidere. Trichloroethene and tetrachloroethene are the principal VOC?s detected at concentrations above regulatory levels, with the largest number of detections and highest concentrations in the glacial drift aquifer. VOC?s generally are not detected in the glacial drift aquifer farther than 1,000 feet from known or potential source areas (industrial or disposal sites), because most source areas are near the Kishwaukee River, where shallow ground water discharges. Across most of the study area, the Glenwood confining unit seems to restrict downward movement of VOC?s into the underlying St. Peter aquifer; in the immediate vicinity of Belvidere, downward movement also seems restricted by lateral movement toward the municipal wells through permeable intervals in the 2 Hydrogeology and Simulation of Ground-Water Flow in the Aquifers Underlying Belvidere, Illinois Galena-Platteville aquifer. Fractures and (or) unused wells that may penetrate the confining unit seem to provide local pathways for limited movement of VOC?s to the sandstone aquifers. At least two municipal wells seem to intercept the bedding-plane partings at about 525 and 485 feet above sea level. Water levels in the lower one-third of the Galena-Platteville aquifer rapidly respond to withdrawals at these wells. The ground-water-flow system underlying Belvidere was simulated to test the conceptual model of the system. The three-dimensional, steady-state model represents the glacial drift, Galena-Platteville, and sandstone aquifers sep

Water-Resources Investigations Report↗
USGS2007

Site Report for USGS Test Holes Drilled at Cape Charles, Northampton County, Virginia, in 2004

The U.S. Geological Survey drilled two test holes near Cape Charles, Virginia, during May and June 2004, as part of an investigation of the buried, late Eocene Chesapeake Bay impact structure. The first hole is designated as the USGS-Sustainable Technology Park test hole #1 (USGS-STP1). This test hole was abandoned at a depth of 300 ft; cuttings samples were collected, but no cores or geophysical logs were acquired. The second hole is designated as the USGS-Sustainable Technology Park test hole #2 (USGS-STP2). This test hole was drilled to a depth of 2,699 ft. Cores were collected between depths of 1,401.7 ft and 1,420.7 ft and between 2,440.0 ft and 2,699.0 ft. Cuttings samples were collected from the uncored intervals below 280-ft depth. Interim sets of geophysical logs were acquired during the drilling operation, and one final set was acquired at the end of drilling. Two wells were installed in the USGS-STP2 test hole. The deep well (designated 62G-24) was screened between 2,260 ft and 2,280 ft, and the shallow well (designated 62G-25) was screened between 1,360 ft and 1,380 ft. Ground-water salinities stabilized at 40 parts per thousand for the deep well and 20 parts per thousand for the shallow well. The geologic section encountered in the test holes consists of three main units: (1) Eocene, Oligocene, Miocene, Pliocene, and Pleistocene sands and clays are present between land surface and a depth of 1,163 ft; (2) sediment-clast breccias of the impact structure are present between depths of 1,163 ft and 2,150 ft; and (3) crystalline-clast breccias and cataclastic gneiss of the impact structure are present between depths of 2,150 ft and 2,699 ft.

Open-File Report↗
USGS2023

Active volcanism on the Arabian Shield—Geology, volcanology, and geophysics of northern Harrat Rahat and vicinity, Kingdom of Saudi Arabia

Active volcanic systems pose serious hazards to people and property including inundation and incineration by lava, blanketing by tephra (volcanic ash), exposure to noxious volcanic gases, and damage from shallow earthquakes triggered by ascending molten material (magma). To improve understanding of volcanism and associated seismicity on the western Arabia Plate, the Saudi Geological Survey and the U.S. Geological Survey conducted a multi-year investigation of the northern Harrat Rahat volcanic field adjacent to the city of Al Madīnah al Munawwarah, Kingdom of Saudi Arabia. Project components included creation of a high-resolution digital topographic base; interpretation of eruptive history supported by detailed geologic mapping, paleomagnetism, and abundant high-precision geochronology of volcanic deposits; assessments of eruptive styles and volcanic hazards by physical volcanology; investigation of the origins of magmas in the mantle and of their differentiation in the crust revealed by chemical and isotopic petrology; gravity and magnetotelluric surveys to reveal crustal structures and to search for magma reservoirs; and regional and local seismic tomography and analyses of seismic hazards. Project results are presented in this Professional Paper as chapters written for technical scientific audiences.

Professional Paper↗
USGS2013

Sediment distribution and hydrologic conditions of the Potomac aquifer in Virginia and parts of Maryland and North Carolina

Sediments of the heavily used Potomac aquifer broadly contrast across major structural features of the Atlantic Coastal Plain Physiographic Province in eastern Virginia and adjacent parts of Maryland and North Carolina. Thicknesses and relative dominance of the highly interbedded fluvial sediments vary regionally. Vertical intervals in boreholes of coarse-grained sediment commonly targeted for completion of water-supply wells are thickest and most widespread across the central and southern parts of the Virginia Coastal Plain. Designated as the Norfolk arch depositional subarea, the entire sediment thickness here functions hydraulically as a single interconnected aquifer. By contrast, coarse-grained sediment intervals are thinner and less widespread across the northern part of the Virginia Coastal Plain and into southern Maryland, designated as the Salisbury embayment depositional subarea. Fine-grained intervals that are generally avoided for completion of water-supply wells are increasingly thick and widespread northward. Fine-grained intervals collectively as thick as several hundred feet comprise two continuous confining units that hydraulically separate three vertically spaced subaquifers. The subaquifers are continuous northward but merge southward into the single undivided Potomac aquifer. Lastly, far southeastern Virginia and northeastern North Carolina are designated as the Albemarle embayment depositional subarea, where both coarse- and fine-grained intervals are of only moderate thickness. The entire sediment thickness functions hydraulically as a single interconnected aquifer. A substantial hydrologic separation from overlying aquifers is imposed by the upper Cenomanian confining unit. Potomac aquifer sediments were deposited by a fluvial depositional complex spanning the Virginia Coastal Plain approximately 100 to 145 million years ago. Westward, persistently uplifted granite and gneiss source rocks sustained a supply of coarse-grained sand and gravel. Immature, high-gradient braided streams deposited longitudinal bars and channel fills across the Norfolk arch subarea. By contrast, across the Salisbury and Albemarle embayment subareas, mature, medium- to low-gradient meandering streams deposited medium- to coarse-grained channel fills and point bars segregated from fine-grained overbank deposits. The Virginia depositional complex merged northward across the Salisbury embayment subarea with another complex in Maryland. Here, additional sediments were received from schist source rocks that underwent three cycles of initial uplift and rapid erosion followed by crustal stability and erosional leveling. Because of the predominance of coarse-grained sediments, transmissivity, hydraulic conductivity, and regional velocities of lateral flow through the Potomac aquifer are greatest across the Norfolk arch depositional subarea, but decrease progressively northward with increasingly fine-grained sediments. Confining units hydraulically separate the Potomac aquifer from overlying aquifers, as indicated by large vertical hydraulic gradients. By contrast, most of the Potomac aquifer internally functions hydraulically as a single interconnected aquifer, as indicated by uniformly small vertical gradients. Most fine-grained sediments within the aquifer do not hydraulically separate overlying and underlying coarse-grained sediments. Across the Salisbury embayment depositional subarea, however, hydraulic separation among the vertically spaced subaquifers is imposed by the intervening confining units. The Potomac aquifer is the largest and most heavily used source of groundwater in the Virginia Coastal Plain. Water-level declines as great as 200 feet create the potential for saltwater intrusion. Conventional stratigraphic correlation has been generally ineffective at accurately characterizing complexly distributed fluvial sediments that compose the Potomac aquifer. Consequently, the aquifer’s internal hydraulic connectivity and overall hydrologic function have not been well understood. Water-supply planning and development efforts have been hampered, and interpretations of regulatory criteria for allowable water-level declines have been ambiguous. An investigation undertaken during 2010–11 by the U.S. Geological Survey, in cooperation with the Virginia Department of Environmental Quality, provides a comprehensive regional description of the spatial distribution of Potomac aquifer sediments and their relation to hydrologic conditions. Altitudes and thicknesses of 2,725 vertical sediment intervals represent the spatial distribution of Potomac aquifer sediments in the Virginia Coastal Plain and adjacent parts of Maryland and North Carolina. Sediment intervals are designated as either dominantly coarse or fine grained and were determined by interpretation of geophysical logs and ancillary information from 456 boreholes. Sediment-interval and borehole summary statistical data indicate regional trends in sediment lithology and stratigraphic continuity, upon which three structurally based and hydrologically distinct sediment depositional subareas are designated. Broad patterns of sediment deposition over time are inferred from published sediment pollen-age data. Discrepancies in previously drawn hydrostratigraphic relations between southeastern Virginia and northeastern North Carolina are partly resolved based on borehole geophysical logs and a recently documented geologic map and corehole. A conceptual model theorizes the depositional history of the sediments and geologically accounts for their distribution. Documented pumping tests of the Potomac aquifer at 197 locations produced 336 values of transmissivity and 127 values of storativity. Based on effective aquifer thicknesses, 296 values of sediment hydraulic conductivity and 113 values of sediment specific storage are calculated. Vertical hydraulic gradients are calculated from 9,479 pairs of water levels measured between November 17, 1953, and October 4, 2011, in 129 closely spaced pairs of wells. Borehole sediment-interval and related data provide a means to achieve high yielding production wells in the Potomac aquifer by site-specific targeting of drilling operations toward water-bearing coarse-grained sand and gravel. Advance knowledge of the potential of different parts of the aquifer also aids in planning optimal groundwater-development areas. Depositional subareas further provide a possible context for resource management. Current (2013) regulatory limits on water-level declines are relative to top surfaces of subdivided upper, middle, and lower Potomac aquifers across the entire Virginia Coastal Plain, but have the potential to exceed the same limit relative to a single undivided Potomac aquifer. By contrast, designation of the sediments as a single aquifer in the Norfolk arch and Albemarle embayment subareas—and as a series of vertically spaced subaquifers and intervening confining units in the Salisbury embayment subarea—best reflects understanding of the Potomac aquifer and can avoid the potential for excessive water-level declines. Simulation modeling to evaluate effects of groundwater withdrawals could be designed similarly, including vertical discretization and (or) zonation of the Potomac aquifer based on depositional subareas and a geostatistical distribution of aquifer properties derived from borehole sediment-interval data. Further resource-management information needs extend beyond the developed part of the Potomac aquifer, particularly across the Northern Neck and Middle Peninsula where only the shallowest part of the aquifer is known, and include structural aspects such as faults, basement bedrock, and the Chesapeake Bay impact crater.

Maryland, North Carolina, Virginia↗
USGS2009

Investigation of coastal hydrogeology utilizing geophysical and geochemical tools along the Broward County coast, Florida

Geophysical (CHIRP, boomer, and continuous direct-current resistivity) and geochemical tracer studies (continuous and time-series 222 Radon) were conducted along the Broward County coast from Port Everglades to Hillsboro Inlet, Florida. Simultaneous seismic, direct-current resistivity, and radon surveys in the coastal waters provided information to characterize the geologic framework and identify potential groundwater-discharge sites. Time-series radon at the Nova Southeastern University National Coral Reef Institute (NSU/NCRI) seawall indicated a very strong tidally modulated discharge of ground water with 222 Rn activities ranging from 4 to 10 disintegrations per minute per liter depending on tidal stage. CHIRP seismic data provided very detailed bottom profiles (i.e., bathymetry); however, acoustic penetration was poor and resulted in no observed subsurface geologic structure. Boomer data, on the other hand, showed features that are indicative of karst, antecedent topography (buried reefs), and sand-filled troughs. Continuous resistivity profiling (CRP) data showed slight variability in the subsurface along the coast. Subtle changes in subsurface resistivity between nearshore (higher values) and offshore (lower values) profiles may indicate either a freshening of subsurface water nearshore or a change in sediment porosity or lithology. Further lithologic and hydrologic controls from sediment or rock cores or well data are needed to constrain the variability in CRP data.

Florida↗
USGS2010

Completion Summary for Well NRF-16 near the Naval Reactors Facility, Idaho National Laboratory, Idaho

In 2009, the U.S. Geological Survey in cooperation with the U.S. Department of Energy's Naval Reactors Laboratory Field Office, Idaho Branch Office cored and completed well NRF-16 for monitoring the eastern Snake River Plain (SRP) aquifer. The borehole was initially cored to a depth of 425 feet below land surface and water samples and geophysical data were collected and analyzed to determine if well NRF-16 would meet criteria requested by Naval Reactors Facility (NRF) for a new upgradient well. Final construction continued after initial water samples and geophysical data indicated that NRF-16 would produce chemical concentrations representative of upgradient aquifer water not influenced by NRF facility disposal, and that the well was capable of producing sustainable discharge for ongoing monitoring. The borehole was reamed and constructed as a Comprehensive Environmental Response Compensation and Liability Act monitoring well complete with screen and dedicated pump. Geophysical and borehole video logs were collected after coring and final completion of the monitoring well. Geophysical logs were examined in conjunction with the borehole core to identify primary flow paths for groundwater, which are believed to occur in the intervals of fractured and vesicular basalt and to describe borehole lithology in detail. Geophysical data also were examined to look for evidence of perched water and the extent of the annular seal after cement grouting the casing in place. Borehole videos were collected to confirm that no perched water was present and to examine the borehole before and after setting the screen in well NRF-16. Two consecutive single-well aquifer tests to define hydraulic characteristics for well NRF-16 were conducted in the eastern SRP aquifer. Transmissivity and hydraulic conductivity averaged from the aquifer tests were 4.8 x 103 ft2/d and 9.9 ft/d, respectively. The transmissivity for well NRF-16 was within the range of values determined from past aquifer tests in other wells near NRF of 4.4 x 102 to 5.1 x 105 ft2/d. Water samples were analyzed for metals, nutrients, total organic carbon, volatile organic compounds, semi-volatile organic compounds, herbicides, pesticides, polychlorinated biphenols, and radionuclides. All chloride, nitrate, and sulfate concentrations were less than background concentrations for the eastern SRP aquifer north of the NRF. Concentrations in water samples for most of the organic compounds and radionuclides were less than the reporting limits and reporting levels.

Scientific Investigations Report↗
USGS2021

Conceptual and numerical groundwater flow model of the Cedar River alluvial aquifer system with simulation of drought stress on groundwater availability near Cedar Rapids, Iowa, for 2011 through 2013

Between July 2011 and February 2013, the City of Cedar Rapids observed water level declines in their horizontal collector wells approaching 11 meters. As a result, pumping from these production wells had to be halted, and questions were raised about the reliability of the alluvial aquifer under future drought conditions. The U.S. Geological Survey, in cooperation with the City of Cedar Rapids, completed a study to better understand the effects of drought stress on the Cedar River alluvial aquifer using a numerical groundwater flow model. Previously published groundwater flow models were combined with newly collected airborne, waterborne, down-hole, and land-based geophysical survey data and provided a detailed three-dimensional lithologic model of the Cedar River alluvial aquifer and surrounding area. An improved conceptual model for the groundwater flow system and a lithologic model were used to build and inform a numerical groundwater flow model capable of simulating water levels observed in the City of Cedar Rapids horizontal collector wells during the 2012 drought. Model performance was assessed primarily on the ability of the model to simulate water table elevation at six monitoring wells. Statistical tests were used to assess the numerical model during the calibration period, and results varied from satisfactory to unsatisfactory, likely because of stage changes in the Cedar River and production well withdrawal rates near monitoring wells. Simulated water levels during the 2012 drought indicated a depression near the horizontal collector wells, although simulated elevations at these locations and at monitoring wells were generally overestimated compared to measured values. The numerical groundwater flow model was modified to account for a decrease in seepage rate caused by low flow in the Cedar River and increased production. With seepage rate modification, model results improved; the simulated water table elevations were like those observed in horizontal collector and monitoring wells. Results demonstrated the ability of the model to simulate water levels observed in the horizontal collector wells during the 2012 drought when accounting for a decrease in infiltration from the Cedar River.

Iowa↗
USGS2013

Cold-seep habitat mapping: high-resolution spatial characterization of the Blake Ridge Diapir seep field

Relationships among seep community biomass, diversity, and physiographic controls such as underlying geology are not well understood. Previous efforts to constrain these relationships at the Blake Ridge Diapir were limited to observations from piloted deep-submergence vehicles. In August 2012, the autonomous underwater vehicle (AUV) Sentry collected geophysical and photographic data over a 0.131 km2 area at the Blake Ridge Diapir seeps. A nested survey approach was used that began with a regional or reconnaissance-style survey using sub-bottom mapping systems to locate and identify seeps and underlying conduits. This survey was followed by AUV-mounted sidescan sonar and multibeam echosounder systems mapping on a mesoscale to characterize the seabed physiography. At the most detailed survey level, digital photographic imaging was used to resolve sub-meter characteristics of the biology. Four pockmarks (25–70 m diameter) were documented, each supporting chemosynthetic communities. Concentric zonation of mussels and clams suggests the influence of chemical gradients on megafaunal distribution. Data collection and analytical techniques used here yield high-resolution habitat maps that can serve as baselines to constrain temporal evolution of seafloor seeps, and to inform ecological niche modeling and resource management.

Deep-Sea Research Part II: Topical Studies in Ocea↗
USGS2023

Multiple-well monitoring site within the Poso Creek Oil Field, Kern County, California

Introduction The Poso Creek Oil Field is one of the many fields selected for regional groundwater mapping and monitoring by the California State Water Resources Control Board as part of the Oil and Gas Regional Monitoring Program (RMP; California State Water Resources Control Board, 2015, 2022b; U.S. Geological Survey, 2022a). The U.S. Geological Survey (USGS), in cooperation with the California State Water Resources Control Board, is evaluating several questions about oil and gas development and groundwater resources in California, including (1) the location of groundwater resources; (2) the proximity of oil and gas operations to groundwater and the geologic materials between them; (3) evidence (or no evidence) of fluids from oil and gas sources in groundwater; and (4) the pathways or processes responsible when fluids from oil and gas sources are present in groundwater (U.S. Geological Survey, 2022a). As part of this evaluation, the USGS installed a multiple-well monitoring site within the administrative boundary of the Poso Creek Oil Field about 12 miles north of Bakersfield, California (fig. 1). Data collected at the Poso Creek multiple-well monitoring site (PCCT) provide information about the geology, hydrology, geophysical properties, and water quality of the aquifer system overlying the oil-bearing zone, thus enhancing understanding of relations between adjacent groundwater and the Poso Creek Oil Field in an area where groundwater data are limited, particularly at different depths in the aquifer. This report presents construction information for the PCCT and initial geohydrologic data collected from the site. Similar sites installed on the east side of the Lost Hills Oil Field and North and South Belridge Oil Fields were described by Everett and others (2020a, b).

California↗
USGS1999

Hydrogeology and analysis of aquifer characteristics in west-central Pinellas County, Florida

The U.S. Geological Survey, in cooperation with Pinellas County, Florida, conducted an investigation to describe the hydrogeology and analyze the aquifer characteristics in west-central Pinellas County. A production test well and four monitor wells were constructed in Pinellas County at Walsingham Park during 1996-97. Water-quality sampling, static and dynamic borehole geophysical surveys, and hydraulic tests were conducted at the wells to delineate the hydrogeology at Walsingham Park. A 9-day aquifer test was conducted to determine the hydraulic characteristics of the aquifer system and observe the changes in water quality due to pumping. A numerical model was constructed to simulate the aquifer test and calculate values for hydraulic conductivity and storage coefficient for permeable zones and confining units at Walsingham Park. Final calibrated values for hydraulic conductivity for the different permeable zones and confining units at the test site were 18 feet per day for Upper Zone A, 750 feet per day for Lower Zone A, 1 foot per day for Zone B, 1x10-4 feet per day for the intermediate confining unit, and 10 feet per day for the semiconfining unit separating Upper Zone A and Lower Zone A. Final calibrated values for storage coefficient were 3.1x10-4 for Upper Zone A, 8.6x10-5 for Lower Zone A, 2.6x10-5 for Zone B, 3.1x10-4 for the intermediate confining unit, and 4.3x10-5 for the semiconfining unit separating Upper Zone A and Lower Zone A. Estimates of transmissivity for Upper Zone A and Lower Zone A were about 2,500 and 37,500 feet squared per day, respectively.

Florida↗
USGS2011

Hydrogeology and simulation of groundwater flow at the Green Valley reclaimed coal refuse site near Terre Haute, Indiana

The Green Valley reclaimed coal refuse site, near Terre Haute, Ind., was mined for coal from 1948 to 1963. Subsurface coal was cleaned and sorted at land surface, and waste material was deposited over the native glacial till. Approximately 2.7 million cubic yards of waste was deposited over 159 acres (92.3 hectares) in tailings ponds and gob piles. During 1993, the Indiana Department of Natural Resources, Division of Reclamation, improved the site by grading gob piles, filling tailings ponds, and covering the refuse with a layer of glacial drift. During 2008, the Division of Reclamation and U.S. Geological Survey initiated a cooperative investigation to characterize the hydrogeology of the site and construct a calibrated groundwater flow model that could be used to simulate the results of future remedial actions. In support of the modeling, a data-collection network was installed at the Green Valley site to measure weather components, geophysical properties, groundwater levels, and stream and seep flow. Results of the investigation indicate that (1) there is negligible overland flow from the site, (2) the prevailing groundwater-flow direction is from northeast to southwest, with a much smaller drainage to the northeast, (3) there is not a direct hydraulic connection between the refuse and West Little Sugar Creek, (4) about 24 percent of the groundwater recharge emerges through seeps, and water from the seeps evaporates or eventually flows to West Little Sugar Creek and the Green Valley Mine Pond, and (5) about 72 percent of groundwater recharge moves vertically downward from the coal refuse into the till and follows long, slow flow paths to eventual dischage points.

Indiana↗
USGS2012

Borehole geophysical, fluid, and hydraulic properties within and surrounding the freshwater/saline-water transition zone, San Antonio segment of the Edwards aquifer, south-central Texas, 2010-11

The freshwater zone of the San Antonio segment of the Edwards aquifer is used by residents of San Antonio and numerous other rapidly growing communities in south-central Texas as their primary water supply source. This freshwater zone is bounded to the south and southeast by a saline-water zone with an intermediate zone transitioning from freshwater to saline water, the transition zone. As demands on this water supply increase, there is concern that the transition zone could potentially move, resulting in more saline water in current supply wells. Since 1985, the U.S. Geological Survey (USGS), San Antonio Water System (SAWS), and other Federal and State agencies have conducted studies to better understand the transition zone. During 2010 and 2011, the USGS, in cooperation with SAWS, conducted a study to further assess the potential for movement of the transition zone in part of the San Antonio segment of the Edwards aquifer. Equivalent freshwater heads were computed to investigate the transition from saline to freshwater zones in the San Antonio segment and evaluate the potential for lateral flow at the freshwater/saline-water interface. Data were collected within and surrounding the transition zone from 13 wells in four transects (East Uvalde, Tri-County, Fish Hatchery, and Kyle). Hydraulic head and geophysical log data were used to calculate equivalent freshwater heads and then analyzed to identify possible horizontal gradients across the transition zone and thus flow. Unlike previous studies that used indirect methods to calculate fluid conductivity from fluid resistivity, in this study geophysical tools that directly measured fluid conductivity were used. Electromagnetic (EM) flowmeter logs were collected under both ambient and stressed (pumping) conditions and were processed to identify vertical flow zones within the borehole. The San Antonio segment of the Edwards aquifer (the study area) is about 175 miles long and extends from the western groundwater divide near Brackettville in Kinney County to the eastern groundwater divide near Kyle in Hays County. The four transects consist of two to five wells per transect and were configured approximately perpendicular to and across the expected trace of the freshwater/saline-water interface. The deep flow zone indicated by the EM flowmeter data for East Uvalde transect well EU2 corresponds directly with a large, negative deflection of the fluid logs, indicating an inflow of fresher water from the Devils River Limestone. To the southwest, towards the freshwater/saline-water interface, this same flow zone was observed in well EU1, but with a reduction of flow, and displayed no apparent fluid curve deflections. The highest observed transmissivity of the study area was observed in the saline zone of the Tri-County transect, at well TC3, which had a total transmissivity of 24,900 square feet per day. Zones of high transmissivity throughout the study site were observed to not be continuous and are likely caused by localized secondary porosity such as intersecting faults or karst features. Although analyses of daily mean equivalent freshwater heads for the East Uvalde transect indicated that the gradient across the freshwater/saline-water interface varied between into and out of the freshwater zone, the data indicate that there was a slightly longer period during which the gradient was out of the freshwater zone. Analyses of all daily mean equivalent freshwater heads for the Tri-County transect indicated that the lateral-head gradients across the freshwater/saline-water interface were typically mixed (not indicative of flow into or out of freshwater zone). Assessment of the daily mean equivalent freshwater heads indicated that, although the lateral-head gradient at the Kyle transect varied between into and out of the freshwater zone, the lateral-head gradient was typically from the transition zone into the freshwater zone.

Texas↗
USGS2017

Three-dimensional hydrogeologic framework model of the Rio Grande transboundary region of New Mexico and Texas, USA, and northern Chihuahua, Mexico

As part of a U.S. Geological Survey study in cooperation with the Bureau of Reclamation, a digital three-dimensional hydrogeologic framework model was constructed for the Rio Grande transboundary region of New Mexico and Texas, USA, and northern Chihuahua, Mexico. This model was constructed to define the aquifer system geometry and subsurface lithologic characteristics and distribution for use in a regional numerical hydrologic model. The model includes five hydrostratigraphic units: river channel alluvium, three informal subdivisions of Santa Fe Group basin fill, and an undivided pre-Santa Fe Group bedrock unit. Model input data were compiled from published cross sections, well data, structure contour maps, selected geophysical data, and contiguous compilations of surficial geology and structural features in the study area. These data were used to construct faulted surfaces that represent the upper and lower subsurface hydrostratigraphic unit boundaries. The digital three-dimensional hydrogeologic framework model is constructed through combining faults, the elevation of the tops of each hydrostratigraphic unit, and boundary lines depicting the subsurface extent of each hydrostratigraphic unit. The framework also compiles a digital representation of the distribution of sedimentary facies within each hydrostratigraphic unit. The digital three-dimensional hydrogeologic model reproduces with reasonable accuracy the previously published subsurface hydrogeologic conceptualization of the aquifer system and represents the large-scale geometry of the subsurface aquifers. The model is at a scale and resolution appropriate for use as the foundation for a numerical hydrologic model of the study area.

Chihuahua, New Mexico, Texas↗
USGS2022

Assessment of well yield, dominant fractures, and groundwater recharge in Wake County, North Carolina

A cooperative study led by the U.S. Geological Survey and Wake County Environmental Services was initiated to characterize the fractured-rock aquifer system and assess the sustainability of groundwater resources in and around Wake County. This report contributes to the development of a comprehensive groundwater budget for the study area, thereby helping to enable resource managers to make sound and sustainable water-supply and water-use decisions. Construction information was used to analyze the well depth, casing depth, and reported well yield of more than 7,500 inventoried wells. The median well depth and casing depth were 265 feet (ft) below land surface (bls) and 68 ft bls, respectively, and the median well yield was 10 gallons per minute. Generally, well yield increased with depth to around 200 ft bls and then began to decrease with depth within the fractured-rock aquifer. Borehole geophysical logging methods were used to characterize the fractured-rock aquifer by mapping the orientation of geologic structures within the subsurface. Structure measurements were made on resulting log data and mapped to observed general spatial trends within the regional groundwater system and more distinct hydrogeologic units. Many of the fractures observed within the borehole logs are steeply dipping across Wake County, although open fractures with shallow dip angles were also observed in most rock classes. Regional geologic structural trends were observed in proximity to the Jonesboro Fault. Potential groundwater recharge in the study area was estimated using a Soil-Water-Balance (SWB) model, as well as using base flow hydrograph separation. The SWB model calculated net infiltration below the root zone for 1981 through 2019 for a 5,402-square-mile area that extends to the counties surrounding Wake County. The mean annual net infiltration rate for the 39-year period was about 8.6 inches per year for the study area. The mean annual net infiltration results from the SWB model were comparable to annual base flow estimates using the PART hydrograph-separation method at six U.S. Geological Survey streamgages within the study area. Mean annual base flow for all six drainage basins was near 7.5 inches per year and estimates ranged from 2.9 to 8.9 inches. Comparisons of mean annual potential recharge from the SWB model and base flow estimates were generally within 2 inches, except during high flows for most of the drainage basins in the study area.

North Carolina↗
USGS2008

Continuous Temperature and Water-Level Data Collected for a Heat Tracer Study on a Selected Reach of Tri-State Canal, Western Nebraska, 2007

The water supply in parts of the North Platte River Basin in the Nebraska Panhandle has been designated as fully appropriated or over appropriated by the Nebraska Department of Natural Resources. Recent legislation (LB 962) requires the North Platte Natural Resources District and the Nebraska Department of Natural Resources to develop an Integrated Management Plan to balance ground- and surface-water supply and demand within the North Platte Natural Resources District. For a ground-water-flow model to accurately simulate existing or future ground-water and surface-water conditions, accurate estimates of specific input variables such as streambed conductance or canal-seepage rates are required. As of 2008, the values input into ground-water models were estimated on the basis of interpreted lithology from test holes and geophysical surveys. Often, contrasts of several orders of magnitude exist for streambed conductance among the various sediment textures present locally, and thin, near-surface layers of fine sediment can clog the streambed, substantially reducing conductance. To accurately quantify the rates of leakage from irrigation canals and estimate ground-water recharge, the U.S. Geological Survey, in cooperation with the North Platte Natural Resources District, collected continuous temperature and water-level data to use heat as a tracer for a selected reach of Tri-State Canal west of Scottsbluff, Nebraska. Continuous records of subsurface temperature, ground-water level, canal stage, and water temperature, and sediment core data are presented in this report. Subsurface temperature was monitored at four vertical sensor arrays of thermocouples installed at various depths beneath the canal bed from March through September 2007. Canal stage and water temperature were measured from June to September 2007. Ground-water level was recorded continuously in an observation well drilled near the subsurface temperature monitoring site. These data sets were collected for use as inputs for a computer model to estimate the vertical hydraulic conductivity. Before the initiation of flow, diurnal variations in subsurface temperature occurred because of daytime heating and nighttime cooling of bed sediment. Flow in Tri-State Canal was first detected on June 16 at the monitoring site as a disruption in the temperature signal in the shallowest thermocouple in all four vertical sensor arrays. This disruption in the temperature pattern occurred in deeper thermocouples at slightly later times during the rapid infiltration of canal water. The ground-water level began to rise approximately 23 hours after flow was first detected at the monitoring site. Canal stage rose for 7 days until the maximum flow capacity of the canal was approached on June 23, 2007. Measured water temperatures ranged from 18 to 25 degrees Celsius (C) while the canal was flowing near maximum capacity. Small diurnal variations of 1.0 to 1.5 degrees C in water temperature were recorded during this time. Measured ground-water levels rose constantly during the entire irrigation season until levels peaked on September 3, 2007, 3 days after diversions to Tri-State Canal ceased.

Data Series↗