SEARCH · Geology Reports

Results for “Special Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64Linked to original sources

USGS1983

Problems of rising ground-water levels in urban areas with special reference to the Louisville, Kentucky area

Rising ground-water levels are a problem for cities such as San Bernadino, California; Greely and Fort Collins, Colorado; New York City boroughs of Brooklyn and Queens; and Louisville, Kentucky. Ground-water levels showed a steeply rising trend in the alluvial aquifer underlying Louisville during the early and middle 1970 's in response to above average precipitation and a decrease in ground-water withdrawals. This rising trend flattened in 1979 and the water levels are stabilizing at 25 to 45 feet below land surface in the downtown area. Basements are generally 20 to 25 feet below land surface and some utility lines are as much as 40 feet below land surface in this area. Because of the shallow depth to water, any resumption of the upward trend would require preventive measures such as selective dewatering to avoid damage to some structures. (USGS)

Water-Resources Investigations Report↗

USGS2000

U.S. Geological Survey Library classification system

The U.S. Geological Survey Library classification system has been designed for earth science libraries. It is a tool for assigning call numbers to earth science and allied pure science materials in order to collect these materials into related subject groups on the library shelves and arrange them alphabetically by author and title. The classification can be used as a retrieval system to access materials through the subject and geographic numbers. The classification scheme has been developed over the years since 1904 to meet the ever-changing needs of increased specialization and the development of new areas of research in the earth sciences. The system contains seven schedules: Subject schedule Geological survey schedule Earth science periodical schedule Government document periodical schedule General science periodical schedule Earth science map schedule Geographic schedule Introduction provides detailed instructions on the construction of call numbers for works falling into the framework of the classification schedules. The tables following the introduction can be quickly accessed through the use of the newly expanded subject index. The purpose of this publication is to provide the earth science community with a classification and retrieval system for earth science materials, to offer sufficient explanation of its structure and use, and to enable library staff and clientele to classify or access research materials in a library collection.

Bulletin↗

USGS2015

Wildlife specimen collection, preservation, and shipment

Specimens are used to provide supporting information leading to the determination of the cause of disease or death in wildlife and for disease monitoring or surveillance. Commonly used specimens for wildlife disease investigations include intact carcasses, tissues from carcasses, euthanized or moribund animals, parasites, ingested food, feces, or environmental samples. Samples from live animals or the environment (e.g., contaminated feed) in the same vicinity as a mortality event also may be helpful. The type of specimen collected is determined by availability of samples and biological objectives. Multiple fresh, intact carcasses from affected species are the most useful in establishing a cause for a mortality event. Submission of entire carcasses allows observation of gross lesions and abnormalities, as well as disease testing of multiple tissues. Samples from live animals may be more appropriate when sick animals cannot be euthanized (e.g., threatened or endangered species) or for research and monitoring projects examining disease or agents circulating in apparently healthy animals or those not exhibiting clinical signs. Samples from live animals may include collections of blood, hair, feathers, feces, or ectoparasites, or samples obtained by swabbing lesions or orifices. Photographs and videos are useful additions for recording field and clinical signs and conveying conditions at the site. Collection of environmental samples (e.g., feces, water, feed, or soil) may be appropriate when animals cannot be captured for sampling or the disease agent may persist in the environment. If lethal collection is considered necessary, biologists should refer to the policies, procedures, and permit requirements of their institution/facility and the agency responsible for species management (U.S. Fish and Wildlife Service or State natural resource agency) prior to use in the field. If threatened or endangered species are found dead, or there is evidence of illegal take, field personal should contact local wildlife law enforcement authorities immediately and prior to handling the carcass. Prior to collecting samples, it is important to determine the capabilities and submission criteria of the laboratory receiving the samples. Some laboratories may specialize in a limited number of tests, be equipped to accept only certain types of tissues (instead of entire carcasses), or specialize in particular species or group of animals (e.g., reptiles, birds, mammals). Diagnostic laboratories have specific requirements regarding preparation, labeling, and shipping of samples. Adherence to these requirements helps ensure the usefulness of any submitted specimens. Although laboratories may vary in the cost and turnaround times for diagnostic tests, some laboratories may be able to prioritize samples and accommodate accelerated time frames if communicated at the time of submission. Keeping a prepacked kit with basic carcass-collection supplies, including a paper copy of the specimen history form (available for download from the Web sites of most diagnostic laboratories), in the office or vehicle will decrease the chances of forgetting an essential item and decrease response time for arriving at an event.

Techniques and Methods↗

USGS1996

Management of northern prairies and wetlands for the conservation of neotropical migratory birds

Grasslands and wetlands of the northern prairies provide important breeding habitat for a number of birds. Deciding which species deserve most attention in managing those habitats depends, in part, on the importance of the area to the species. Many species in northern prairies are more common elsewhere and need no special consideration in that area. Several species, however, are critically dependent on the prairies. These species merit particular attention if protection of biodiversity is a goal. Both grasslands and wetlands in the northern prairies have been extensively converted for agricultural use, which has reduced the value of these habitats for breeding birds. Most land-use changes took place before monitoring programs for birds began, so quantitative assessments of changes in avian populations are lacking. This paper discusses the status of bird populations in the northern prairies, key upland and wetland habitats, effects of common management practices, and issues that specifically result from a landscape perspective. Most management practices are employed for other objectives; consequences to nongame birds are incidental, but vitally important to some species.

General Technical Report↗

USGS2016

A software tool for rapid flood inundation mapping

The GIS Flood Tool (GFT) was developed by the U.S. Geological Survey with support from the U.S. Agency for International Development’s Office of U.S. Foreign Disaster Assistance to provide a means for production of reconnaissance-level flood inundation mapping for data-sparse and resource-limited areas of the world. The GFT has also attracted interest as a tool for rapid assessment flood inundation mapping for the Flood Inundation Mapping Program of the U.S. Geological Survey. The GFT can fill an important gap for communities that lack flood inundation mapping by providing a first-estimate of inundation zones, pending availability of resources to complete an engineering study. The tool can also help identify priority areas for application of scarce flood inundation mapping resources. The technical basis of the GFT is an application of the Manning equation for steady flow in an open channel, operating on specially processed digital elevation data. The GFT is implemented as a software extension in ArcGIS. Output maps from the GFT were validated at 11 sites with inundation maps produced previously by the Flood Inundation Mapping Program using standard one-dimensional hydraulic modeling techniques. In 80 percent of the cases, the GFT inundation patterns matched 75 percent or more of the one-dimensional hydraulic model inundation patterns. Lower rates of pattern agreement were seen at sites with low relief and subtle surface water divides. Although the GFT is simple to use, it should be applied with the oversight or review of a qualified hydraulic engineer who understands the simplifying assumptions of the approach.

Open-File Report↗

USGS1977

Genesis of a zoned granite stock, Seward Peninsula, Alaska

A composite epizonal stock of biotite granite has intruded a diverse assemblage of metamorphic rocks in the Serpentine Hot Springs area of north-central Seward Peninsula, Alaska. The metamorphic rocks include amphibolite-facies orthogneiss and paragneiss, greenschist-facies fine-grained siliceous and graphitic metasediments, and a variety of carbonate rocks. Lithologic units within the metamorphic terrane trend generally north-northeast and dip moderately toward the southeast. Thrust faults locally juxtapose lithologic units in the metamorphic assemblage, and normal faults displace both the metamorphic rocks and some parts of the granite stock. The gneisses and graphitic metasediments are believed to be late Precambrian in age, but the carbonate rocks are in part Paleozoic. Dating by the potassium-argon method indicates that the granite stock is Late Cretaceous. The stock has sharp discordant contacts, beyond which is a well-developed thermal aureole with rocks of hornblende hornfels facies. The average mode of the granite is 29 percent plagioclase, 31 percent quartz, 36 percent K-feldspar, and 4 percent biotite. Accessory minerals include apatite, magnetite, sphene, allanite, and zircon. Late-stage or deuteric minerals include muscovite, fluorite, tourmaline, quartz, and albite. The stock is a zoned complex containing rocks with several textural facies that are present in four partly concentric zones. Zone 1 is a discontinuous border unit, containing fine- to coarse-grained biotite granite, that grades inward into zone 2. Zone 2 consists of porphyritic biotite granite with oriented phenocrysts of pinkish-gray microcline in a coarse-grained equigranular groundmass of plagioclase, quartz, and biotite. It is in sharp, concordant to discordant contact with rocks of zone 3. Zone 3 consists of seriate-textured biotite granite that has been intruded by bodies of porphyritic biotite granite containing phenocrysts of plagioclase, K-feldspar, quartz, and biotite in an aplitic groundmass. Flow structures, pegmatite and aplite segregations, and miarolitic cavities are common in the seriate-textured granite. Zone 4, which forms the central part of the complex, consists of fine- to medium-grained biotite granite and locally developed leucogranite. Small miarolitic cavities are common within it. Eight textural facies have been defined within the complex, and mineralogic, petrographic, modal, and chemical variations are broadly systematic within the facies sequence. Study of these variations shows that the gradational facies of zones l and 2 systematically shift toward more mafic compositions inward within the complex. Seriate-textured rocks of zone 3 are similar in composition to those of zone 2, but porphyritic rocks of zone 3 and rocks of zone 4 mark shifts to more felsic compositions. These late-crystallizing felsic rocks are products of an interior residual magma system. This system was enriched in water and certain trace elements including tin, lithium, niobium, lead, and zinc. The complex as a whole has higher concentrations of these elements than many other granites. The nature of this geochemical specialization is particularly well demonstrated by the trace-element composition of biotite. The crystallization history of the pluton was complex. The available data suggest that this history could have included: (1) chilling and metasomatic alteration adjacent to the contact, (2) in-situ crystallization in several marginal facies accompanied by some transfer of residual constituents toward interior parts of the pluton, (3) slight upward displacement of magma that was subjacent to the crystallized walls, accompanied by disequilibrium crystallization and local vapor saturation, (4) upward displacement of part of the residual water-rich interior magma, accompanied by rapid loss of a separated vapor phase, and (5) displacement of the margins of the pluton by normal faults, accompanied by loss of an exsolved vapor phase from th

Open-File Report↗

USGS2012

Status of groundwater quality in the Upper Santa Ana Watershed, November 2006--March 2007--California GAMA Priority Basin Project

Groundwater quality in the approximately 1,000-square-mile (2,590-square-kilometer) Upper Santa Ana Watershed (USAW) study unit was investigated as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The study unit is located in southern California in Riverside and San Bernardino Counties. The GAMA Priority Basin Project is being conducted by the California State Water Resources Control Board in collaboration with the U.S. Geological Survey and the Lawrence Livermore National Laboratory. The GAMA USAW study was designed to provide a spatially unbiased assessment of untreated groundwater quality within the primary aquifer systems in the study unit. The primary aquifer systems (hereinafter, primary aquifers) are defined as the perforation interval of wells listed in the California Department of Public Health (CDPH) database for the USAW study unit. The quality of groundwater in shallower or deeper water-bearing zones may differ from that in the primary aquifers; shallower groundwater may be more vulnerable to surficial contamination. The assessment is based on water-quality and ancillary data collected by the U.S. Geological Survey (USGS) from 90 wells during November 2006 through March 2007, and water-quality data from the CDPH database. The status of the current quality of the groundwater resource was assessed based on data from samples analyzed for volatile organic compounds (VOCs), pesticides, and naturally occurring inorganic constituents, such as major ions and trace elements. The status assessment is intended to characterize the quality of groundwater resources within the primary aquifers of the USAW study unit, not the treated drinking water delivered to consumers by water purveyors. Relative-concentrations (sample concentration divided by the health- or aesthetic-based benchmark concentration) were used for evaluating groundwater quality for those constituents that have Federal or California regulatory or non-regulatory benchmarks for drinking-water quality. A relative-concentration greater than (>) 1.0 indicates a concentration above a benchmark, and a relative-concentration less than or equal to (≤) 1.0 indicates a concentration equal to or less than a benchmark. Organic and special-interest constituent relative-concentrations were classified as "high" (> 1.0), "moderate" (0.1 < relative-concentration ≤ 1.0), or "low" (≤ 0.1). Inorganic constituent relative-concentrations were classified as "high" (> 1.0), "moderate" (0.5 < relative-concentration ≤ 1.0), or "low" ( ≤ 0.5). Aquifer-scale proportion was used as the primary metric in the status assessment for evaluating regional-scale groundwater quality. Aquifer-scale proportions are defined as the percentage of the area of the primary aquifer system with concentrations above or below specified thresholds relative to regulatory or aesthetic benchmarks. High aquifer-scale proportion is defined as the percentage of the area of the primary aquifers with a relative-concentration greater than 1.0 for a particular constituent or class of constituents; percentage is based on an areal, rather than a volumetric basis. Moderate and low aquifer-scale proportions were defined as the percentage of the primary aquifers with moderate and low relative-concentrations, respectively. Two statistical approaches—grid-based and spatially weighted—were used to evaluate aquifer-scale proportions for individual constituents and classes of constituents. Grid-based and spatially weighted estimates were comparable in the USAW study unit (within 90-percent confidence intervals). Inorganic constituents with human-health benchmarks had relative-concentrations that were high in 32.9 percent of the primary aquifers, moderate in 29.3 percent, and low in 37.8 percent. The high aquifer-scale proportion of these inorganic constituents primarily reflected high aquifer-scale proportions of nitrate (high relative-concentration in 25.3 percent of the aquifer), although seven other inorganic constituents with human-health benchmarks also were detected at high relative-concentrations in some percentage of the aquifer: arsenic, boron, fluoride, gross alpha activity, molybdenum, uranium, and vanadium. Perchlorate, as a constituent of special interest, was evaluated separately from other inorganic constituents, and had high relative-concentrations in 11.1 percent, moderate in 53.3 percent, and low or not detected in 35.6 percent of the primary aquifers. In contrast to the inorganic constituents, relative-concentrations of organic constituents (one or more) were high in 6.7 percent, moderate in 11.1 percent, and low or not detected in 82.2 percent of the primary aquifers. Of the 237 organic and special-interest constituents analyzed for, 39 constituents were detected (21 VOCs, 13 pesticides, 3 pharmaceuticals, and 2 constituents of special interest). All of the detected VOCs had health-based benchmarks, and five of these—1,1-dichloroethene, 1,2-dibromo-3-chloropropane (DBCP), tetrachloroethene (PCE), carbon tetrachloride, and trichloroethene (TCE)—were detected in at least one sample at a concentration above a benchmark (high relative-concentration). Seven of the 13 pesticides had health-based benchmarks, and none were detected above these benchmarks (no high relative-concentrations). Pharmaceuticals do not have health-based benchmarks. Thirteen organic constituents were frequently detected (detected in at least 10 percent of samples without regard to relative-concentrations): bromodichloromethane, chloroform, cis-1,2-dichloroethene, 1,1-dichloroethene, dichlorodifluoromethane (CFC-12), methyl tert-butyl ether (MTBE), PCE, TCE, trichlorofluoromethane (CFC-11), atrazine, bromacil, diuron, and simazine.

California↗

USGS1971

The acoustic streamflow-measuring system on the Columbia River at The Dalles, Oregon

Records of discharge on the Columbia River at The Dalles, Oreg., are vital to the management of the complex water-development projects in the Columbia River basin. Accurate discharge figures are needed for consistent day-to-day management and are required to meet treaty obligations with Canada. Because dams have been erected that completely control watersurface elevations at nearly all points in the river from Bonneville Dam to the Canadian border, conventional stream-gaging methods, used historically, are no longer adequate. Consequently, new techniques must be used to obtain the accurate discharge records required--records that are computed independently from the hydroelectric operation logs and that stand alone as the recognized flow records in the basin. This need for an accurate, independent gaging system has been met by the installation of an acoustic streamflow-measuring system in the river channel at The Dalles, Oreg. This device provides an index of water velocity by measuring the difference in traveltimes of acoustic pulses transmitted through the water in each direction along a diagonal path across the river. The flow of water along the path increases the speed of one signal and retards the speed of the other. The difference in time of travel is related linearly to the water velocity along the path. The velocity index and river stage are used as a two-variable index in the computation of flow. These variables, correlated against current-meter measurements made with specialized boat equipment, provide a reliable basis for computations of instantaneous and daily mean discharges. Installation of this sytem, which is the first application of an AVM (acoustic velocity meter) in a large natural channel, was completed in April 1969. It has been in continuous operation since that date. Performance has been satisfactory, and similar installations at other key points in the Columbia River basin are now under consideration. This paper covers the general theory behind acoustic velocity meters, tracing development from earlier concepts to the present commercially available system. Conclusions are that the AVM can now be considered as an operational instrument which permits accurate gaging of river discharge at many sites where conventional stream-gaging procedures have proved to be unreliable.

Oregon↗

USGS1983

The oil and gas industry of coastal Louisiana and its effects on land use and other socioeconomic patterns

Louisiana's coastal wetlands, alone with their well-drained urbanized strips, have been significantly affected by the oil and gas industry. Onshore, more than 6,300 exploratory wells and more than 21,000 development wells were drilled in Louisiana's eight southernmost parishes between 1937 and 1977. Nearly all those wells were in wetlands or inland water bodies. The wetlands, totaling more than 2 million hectares (ha), extend inland to roughly latitude 30? N, and are about 15 percent forested swamp and 85 percent nonforested marsh. Inland waters within the Louisiana coastal zone total more than 1 million ha. Nearly all these waters are quite shallow. More than 235,000 ha of this coastal area is used for major activities associated with the extraction of oil and gas. Production in the eight southern parishes peaked in 1970 to 120 million m3 of oil and 172 billion m 3 of gas. Connecting extensive onshore fields--and also servicing offshore fields--are intricate networks of canals for pipelines and maritime traffic related to the oil and gas industry. Offshore, more than 2,400 drilling and production platforms had been installed by May of 1981. Oil production from wells in both Federal and State waters off Louisiana peaked at 71 million m3 in 1972. Offshore gas production continues to increase, with 131 billion m3, in 1979. Since the early 1950's southern Louisiana's population has shifted from remote rural areas in the marshes to the more densely settled areas on the natural levees and beach ridges where employment is available in oil-field support industries and businesses. In 1975, in the 14 primary settlement clusters within the coastal wetlands, more than 3,600 advertised business activities were connected directly to the oil and gas industry. This compares to about 1,200 such activities in 1955, at the start of offshore development. These businesses are listed as water transportation, transportation equipment, pipelines, chemicals, special trade contractors, and petroleum refining, as well as actual oil and gas extraction. Area measurements of urban land uses reveal a major concentration of industry and transportation facilities along the navigable waterways. Ship and rig construction are important activities; of 148 fixed drilling platforms under construction in the United States in March 1981, 94 were being built in Louisiana to be barged out into the Gulf of Mexico and beyond. Of the 122 petroleum-industry support boats being built in the United States in 1976, 82 were in Louisiana shipyards; the worldwide total was estimated to be only about 200. In 1980, the Nation's marine con- tractors were building 129 logistic support vessels. Louisiana-based firms had 98 vessels under construction.

Open-File Report↗

USGS2012

Magnetostratigraphy susceptibility for the Guadalupian Series GSSPs (Middle Permian) in Guadalupe Mountains National Park and adjacent areas in West Texas

Here we establish a magnetostratigraphy susceptibility zonation for the three Middle Permian Global boundary Stratotype Sections and Points (GSSPs) that have recently been defined, located in Guadalupe Mountains National Park, West Texas, USA. These GSSPs, all within the Middle Permian Guadalupian Series, define (1) the base of the Roadian Stage (base of the Guadalupian Series), (2) the base of the Wordian Stage and (3) the base of the Capitanian Stage. Data from two additional stratigraphic successions in the region, equivalent in age to the Kungurian–Roadian and Wordian–Capitanian boundary intervals, are also reported. Based on low-field, mass specific magnetic susceptibility (χ) measurements of 706 closely spaced samples from these stratigraphic sections and time-series analysis of one of these sections, we (1) define the magnetostratigraphy susceptibility zonation for the three Guadalupian Series Global boundary Stratotype Sections and Points; (2) demonstrate that χ datasets provide a proxy for climate cyclicity; (3) give quantitative estimates of the time it took for some of these sediments to accumulate; (4) give the rates at which sediments were accumulated; (5) allow more precise correlation to equivalent sections in the region; (6) identify anomalous stratigraphic horizons; and (7) give estimates for timing and duration of geological events within sections.

Texas↗

USGS2007

Estimation of Freely-Dissolved Concentrations of Polychlorinated Biphenyls, 2,3,7,8-Substituted Congeners and Homologs of Polychlorinated dibenzo-p-dioxins and Dibenzofurans in Water for Development of Total Maximum Daily Loadings for the Bluestone River Watershed, Virginia and West Virginia

The Commonwealth of Virginia Department of Environmental Quality, working closely with the State of West Virginia Department of Environmental Protection and the U.S. Environmental Protection Agency is undertaking a polychlorinated biphenyl source assessment study for the Bluestone River watershed. The study area extends from the Bluefield area of Virginia and West Virginia, targets the Bluestone River and tributaries suspected of contributing to polychlorinated biphenyl, polychlorinated dibenzo-p-dioxin and dibenzofuran contamination, and includes sites near confluences of Big Branch, Brush Fork, and Beaver Pond Creek. The objectives of this study were to gather information about the concentrations, patterns, and distribution of these contaminants at specific study sites to expand current knowledge about polychlorinated biphenyl impacts and to identify potential new sources of contamination. Semipermeable membrane devices were used to integratively accumulate the dissolved fraction of the contaminants at each site. Performance reference compounds were added prior to deployment and used to determine site-specific sampling rates, enabling estimations of time-weighted average water concentrations during the deployed period. Minimum estimated concentrations of polychlorinated biphenyl congeners in water were about 1 picogram per liter per congener, and total concentrations at study sites ranged from 130 to 18,000 picograms per liter. The lowest concentration was 130 picograms per liter, about threefold greater than total hypothetical concentrations from background levels in field blanks. Polychlorinated biphenyl concentrations in water fell into three groups of sites: low (130-350 picogram per liter); medium (640-3,500 picogram per liter; and high (11,000-18,000 picogram per liter). Concentrations at the high sites, Beacon Cave and Beaverpond Branch at the Resurgence, were about four- to sixfold higher than concentrations estimated for the medium group of sites. Minimum estimated concentrations of polychlorinated dibenzo-p-dioxin and dibenzofuran congeners in water were about 0.2 to 1 femtograms per liter. Estimated total concentrations of 2,3,7,8-substituted congeners in water at study sites ranged from less than 1 to 22,000 femtograms per liter and less than 1 to 2,300 femtograms per liter for polychlorinated dibenzo-p-dioxin and dibenzofuran congeners, respectively. Total concentrations of 2,3,7,8-substituted congeners in water were comprised largely of octachlorodibenzo-p-dioxin and dibenzofuran, with less than 10 percent of the total contributed by concentrations of other congeners, mainly 2,3,7,8-heptachlorodibenzo-p-dioxin and dibenzofuran. Of special interest for this study was 2,3,7,8-tetrachlorodibenzo-p-dioxin with a regulatory surface water-quality criterion of 1,200 femtograms per liter. Estimated concentrations in water ranged from 0.5 to 41 femtograms per liter. Concentrations in water were less than 5 femtograms per liter at all study sites, except the Bluefield Westside Sewage Treatment Plan, with an estimated concentration of 41 femtograms per liter. Estimated total concentrations of homologs of polychlorinated dibenzo-p-dioxins and dibenzofurans in water at the study sites ranged from 3,200 to 36,000 femtograms per liter and 210-4,800 femtograms per liter, respectively. Again, homologs of polychlorinated dibenzo-p-dioxins and dibenzofurans in water were comprised largely of octachlorodibenzo-p-dioxin and dibenzofuran.

Open-File Report↗

USGS1996

Synthesis of monthly natural flows for selected sites in the Musselshell River basin, Montana, base period 1929-89

Synthesized monthly natural streamflows were required at 13 sites for use in a streamflow- accounting model to evaluate the effects of various water-allocation schemes on water availability in the Musselshell River Basin in central Montana. Records of monthly streamflow at 14 streamflow-gaging stations were used to synthesize monthly natural flows at tributaries and the 13 synthesis sites. A streamflow-record extension program was used to extend flow records at the 14 gaged sites to a common base period, 1929-89. To synthesize monthly natural flows at 10 sites on the Musselshell River mainstem, synthesized monthly natural flows at all signi- ficant tributary streams were required. Results from a previous study were used to synthesize tributary natural flows. Monthly natural flows at each mainstem site downstream from the first site were synthesized by successively adding monthly natural flows from intervening tributaries to the next upstream mainstem site. Special methods using extended-record flows from gaged tributaries were used to synthesize monthly natural flows at three tributary sites. Synthesized mean annual natural flows were found to be greater than mean annual extended-record flows at three selected comparison sites on the Musselshell River. The differences between mean natural and extended-record flows (depletions) at Harlowton and Musselshell were considered to be reasonable given the amount of irrigated acreage upstream from the two sites. The differences at Mosby, the site farthest downstream, was less than at Musselshell, the next upstream site, indicating that the methods of synthesis had error. The synthesis error generally was attributed to the larger natural variability of tributary flows in the lower portion of the Musselshell River Basin.

Water-Resources Investigations Report↗

USGS1981

A wind powered, ground-water monitoring installation at a radioactive waste management site in Idaho

In 1971, four wells were drilled just outside a radioactive solid waste storage and disposal facility located on the Idaho National Engineering Laboratory in southeastern Idaho. This facility, the Radioactive Waste Management Complex (RWMC), has been in use since 1952. These wells serve several purposes: to study the geology and hydrology at the RWMC, to determine the potential for radioactive waste migration, and to obtain water samples to determine if waste products are migrating downward into the Snake River Plain aquifer. Special efforts are made to insure that surface contamination does not enter the wells by either water, wind, or contaminated equipment. A submersible pump and a continuous water-level measuring device were installed in each well. Permanent installation of this equipment allowed the well heads to be sealed while providing for collection of data from these wells. The water-level measuring device is a small diameter, differential-pressure, transducer probe. The transducer produces a variable-reluctance signal which is converted to an analog signal and recorded as the depth to water on a strip chart recorder. Windmill-charged storage batteries provide power for the water-level measuring system. This system is reliable, sensitive, and relatively maintenance free.

Idaho↗

USGS1969

The Geologic Story of Mount Rainier

Ice-clad Mount Rainier, towering over the landscape of western Washington, ranks with Fuji-yama in Japan, Popocatepeti in Mexico, and Vesuvius in Italy among the great volcanoes of the world. At Mount Rainier, as at other inactive volcanoes, the ever-present possibility of renewed eruptions gives viewers a sense of anticipation, excitement, and apprehension not equaled by most other mountains. Even so, many of us cannot imagine the cataclysmic scale of the eruptions that were responsible for building the giant cone which now stands in silence. We accept the volcano as if it had always been there, and we appreciate only the beauty of its stark expanses of rock and ice, its flower-strewn alpine meadows, and its bordering evergreen forests. Mount Rainier owes its scenic beauty to many features. The broad cone spreads out on top of a major mountain range - the Cascades. The volcano rises about 7,000 feet above its 7,000-foot foundation, and stands in solitary splendor - the highest peak in the entire Cascade Range. Its rocky ice-mantled slopes above timberline contrast with the dense green forests and give Mount Rainier the appearance of an arctic island in a temperate sea, an island so large that you can see its full size and shape only from the air. The mountain is highly photogenic because of the contrasts it offers among bare rock, snowfields, blue sky, and the incomparable flower fields that color its lower slopes, shadows cast by the multitude of cliffs, ridges, canyons, and pinnacles change constantly from sunrise to sunset, endlessly varying the texture and mood of the mountain. The face of the mountain also varies from day to day as its broad snowfields melt during the summer. The melting of these frozen reservoirs makes Mount Rainier a natural resource in a practical as well as in an esthetic sense, for it ensures steady flows of water for hydroelectric power in the region, regardless of season. Seen from the Puget Sound country to the west, Mount Rainier has an unreal quality - its white summit, nearly 3 miles high, seems to float among the clouds. We share with the populace of the entire lowland a thrill as we watch skyward the evening's setting sun reddens the volcano's western snowfields. When you approach the mountain in its lovely setting, you may find something that appeals especially to you - the scenery, the wildlife, the glaciers, or the wildflowers. Or you may feel challenged to climb to the summit. Mount Rainier and its neighboring mountains have a special allure for a geologist because he visualizes the event - some ordinary, some truly spectacular - that made the present landscape. Such is the fascination of geology. A geologist becomes trained to see 'in his mind's eye' geologic events of thousands or even millions of years ago. And, most remarkable, he can 'see' these events by studying rocks in a cliff or roadcut, or perhaps by examining earthy material that looks like common soil beneath pastureland many miles away from the volcano. Our key to understanding the geology of Mount Rainier is that each geologic event can be reconstructed - or imagined - from the rocks formed at the time of the event. With this principle as our guide, we will review the geologic ancestry of this majestic volcano and learn what is behind its scenery.

Washington↗

USGS2021

Status and understanding of groundwater quality in the northern Sierra Nevada foothills domestic-supply aquifer study units, 2015–17—California GAMA Priority Basin Project

Groundwater quality in the northern Sierra Nevada foothills region of California was investigated as part of California State Water Resources Control Board (SWRCB) Groundwater Ambient Monitoring Assessment Priority Basin Project (GAMA-PBP). The region was divided into two study units: the Yuba-Bear watersheds (YBW) study unit and the American-Cosumnes-Mokelumne watersheds (ACMW) study unit. The GAMA-PBP made a spatially unbiased assessment of aquifer systems used for domestic drinking-water supply in the study region, which are predominantly composed of fractured, hard-rock aquifers of varying lithology. These assessments characterized the quality of raw groundwater to evaluate ambient conditions in the domestic-supply aquifer and not the quality of treated drinking water. The study included three components: (1) a status assessment , which characterized the quality of groundwater resources used for domestic drinking-water supply in the YBW and ACMW study units; (2) an understanding assessment , which evaluated natural and anthropogenic explanatory factors that could potentially affect groundwater quality in the study region; and (3) a comparative assessment between the groundwater resources used for domestic and public drinking-water supply in the study region. The status assessment was based on data collected by the GAMA-PBP from 74 sites in the YBW study unit during 2015–16 and 67 sites in the ACMW study unit from 2016 to 2017. To contextualize water-quality results, concentrations of water-quality constituents in ambient groundwater were compared to regulatory and non-regulatory benchmarks typically used by the State of California and Federal agencies as health-based or aesthetic standards for public drinking water. The status assessment used a grid-based method to estimate proportions of groundwater resources with concentrations approaching or exceeding benchmark thresholds. This method provides spatially unbiased results and allows inter-comparability with similar groundwater-quality assessments. Inorganic constituents with health-based benchmarks were present at high relative concentration (RC), meaning they exceeded the benchmark threshold, in 5.4 and 10 percent of domestic-supply aquifer systems in the YBW and ACMW study units, respectively. Inorganic constituents with aesthetic-based benchmarks were detected at high-RCs in 20 and 28 percent of the YBW and ACMW study units, respectively. The inorganic constituents present at high RC were arsenic, barium, boron, molybdenum, strontium, nitrate, adjusted gross-alpha particle activity, chloride, total dissolved solids, specific conductance, iron, manganese, and hardness. Groundwater samples were tested for presence or absence of three microbial indicators (total coliform, Escherichia coli , and Enterococci ). At least one microbial indicator was present in 26 and 28 percent of the YBW and ACMW study units, respectively. At least one organic constituent was detected in 30 and 42 percent of the YBW and ACMW study units, respectively. Organic constituents were not present at high RC, but tetrachloroethene (PCE), trichloroethene (TCE), and toluene were detected in the YBW study unit at moderate RC (between the benchmark concentration and one-tenth of the benchmark concentration). Methyl tert -butyl ether (MTBE) and chloroform were present at low RC (less than one-tenth of the benchmark concentration) in the YBW and ACMW study units with detection frequencies greater than 10 percent. Perchlorate, a constituent of special interest, was detected in 31 and 41 percent of the YBW and ACMW study units, respectively, at either low or moderate RCs. Relations among select water-quality constituents and potential explanatory factors were evaluated using statistical and graphical approaches. Nitrate, microbial indicators, and perchlorate were all correlated to elevation-dependent variables relating to climate, land use, and recharge condition. Isotopic and dissolved noble-gas tracers indicated these water-quality constituents are associated with recharge conditions associated with irrigation during the summer dry-season, which is common in areas of rural-residential or agricultural land uses. Higher concentrations of iron and manganese were primarily associated with anoxic groundwater in aquifers of metasedimentary lithology. Increased hardness was primarily associated with anoxic groundwater in aquifers of mafic-ultramafic or metavolcanics lithologies at lower elevations in the study region in the Melones fault zone. Chloroform and MTBE were associated with shallow groundwater (wells depths less than 130 m) under oxic and anoxic redox conditions, respectively. The comparative assessment evaluated differences between the aquifer systems used for domestic- and public-supply in study region based on (1) well-construction characteristics, and (2) water quality. Analysis of over 60,000 well-completion reports in the study region showed that although domestic-supply wells span the deepest depth zones in regional aquifers, median depths for public-supply wells were significantly greater than those of domestic-supply wells in both study units. Water-quality data from more than 300 public-supply wells in the study region were assessed using a spatially weighted method for calculation aquifer-scale proportions and compared with the domestic-supply assessment results. Detections of inorganic constituents at high RC and detection frequencies for organic constituents were generally similar between the domestic- and public-supply aquifer systems in both study units, with a few notable exceptions in the ACMW study unit: nitrate was greater for the public- compared to domestic-supply aquifer system and both manganese, hardness, and MTBE were greater in the domestic- compared to public-supply aquifer system. These differences are likely related to contrasting land uses, aquifer lithologies, landscape positions, and depths characterizing domestic- and public-supply wells in the ACMW study unit. Overall, fewer samples from domestic-supply wells in the northern Sierra Nevada foothills exceeded health-based benchmarks compared to aesthetic-based benchmarks for groundwater quality. Exceedences of health-based benchmarks were primarily caused by nitrate and coliform bacteria, which were associated with recharge from diverted surface water used primarily for irrigation. Exceedences of aesthetic-based benchmarks were primarily caused by iron, managanese, and hardness, which were associated with geologic factors. Regional irrigation practices and aquifer lithology can affect groundwater quality in fractured-rock aquifers in the northern Sierra Nevada foothills used for domestic drinking-water supply.

California↗

USGS1978

Field determination of vertical permeability to air in the unsaturated zone

The vertical permeability to air of layered materials in the unsaturated zone may be determined from air pressure data obtained at depth during a period when air pressure is changing at land surface. Such data may be obtained by monitoring barometric pressure with a microbarograph or surveying altimeter and simultaneously measuring down-hole pneumatic head differences in specially constructed piezometers. These data, coupled with air-filled porosity data from other sources, may be compared with the results of electric-analog or numerical solution of the one-dimensional diffusion equation to make a trial-and-error determination of the air permeability for each layer. The permeabilities to air may in turn be converted to equivalent hydraulic conductivity values if the materials are well drained, are permeable enough that the Klinkenberg effect is small, and are structurally unaffected by wetting. The method offers potential advantages over present methods to evaluate sites for artificial recharge by spreading; to evaluate ground-water pollution hazards from feedlots, sanitary landfills , and land irrigated with sewage effluent; and to evaluate sites for temporary storage of gas in the unsaturated zone. (Woodard-USGS)

Professional Paper↗

USGS2024

Environmental DNA dynamics of three species of unionid freshwater mussels

North American freshwater mussels are of special conservation concern due to their high endemism and the multiple anthropogenic stressors affecting them. Of the over 300 species in North America, nearly one third of these species are federally listed as threatened or endangered. Environmental DNA (eDNA) analysis has been successful in detecting freshwater mussels and could aid in monitoring their populations. Production and degradation rates of eDNA for the species of interest are needed to inform interpretation of eDNA detections, allow possible modeling of relative abundance and population location, and aid in mussel conservation through population identification. Here, we designed and tested qPCR assays for three freshwater mussel species, mucket ( Ortmanniana ligamentina ), fatmucket ( Lampsilis siliquoidea ), and the federally endangered spectaclecase ( Cumberlandia monodonta ). We performed laboratory experiments under controlled conditions to measure eDNA shedding and degradation rates for each species. Different biomasses, temperatures, and food regimens were tested independently to determine if these factors influence the amount of DNA produced by the mussels. Degradation rates of eDNA were measured from experimental tank water after mussels were removed. Overall, we observed low eDNA shedding rates for freshwater mussels compared to previous studies of fish eDNA shedding rates. Furthermore, temperature and feeding showed limited or no significant effects in the species studied. Environmental DNA degradation rates were consistent with those reported in the literature for other taxa. Collectively, our results will be useful for designing eDNA monitoring studies, modeling eDNA dispersal, and interpreting eDNA results to help inform freshwater mussel conservation efforts.

Environmental DNA↗

USGS2014

Geologic implications of gas hydrates in the offshore of India: Krishna-Godavari Basin, Mahanadi Basin, Andaman Sea, Kerala-Konkan Basin

Gas hydrate resource assessments that indicate enormous global volumes of gas present within hydrate accumulations have been one of the primary driving forces behind the growing interest in gas hydrates. Gas hydrate volumetric estimates in recent years have focused on documenting the geologic parameters in the “gas hydrate petroleum system” that control the occurrence of gas hydrates in nature. The primary goals of this report are to review our present understanding of the geologic controls on the occurrence of gas hydrate in the offshore of India and to document the application of the petroleum system approach to the study of gas hydrates. National Gas Hydrate Program of India executed the National Gas Hydrate Program Expedition 01 (NGHP-01) in 2006 in four areas located on the eastern and western margins of the Indian Peninsula and in the Andaman Sea. These areas have experienced very different tectonic and depositional histories. The peninsular margins are passive continental margins resulting from a series of rifting episodes during the breakup and dispersion of Gondwanaland to form the present Indian Ocean. The Andaman Sea is bounded on its western side by a convergent margin where the Indian plate lithosphere is being subducted beneath southeast Asia. NGHP-01 drilled, logged, and/or cored 15 sites (31 holes) in the Krishna–Godavari Basin, 4 sites (5 holes) in the Mahanadi Basin, 1 site (2 holes) in the Andaman Sea, and 1 site (1 hole) in the Kerala–Konkan Basin. Holes were drilled using standard drilling methods for the purpose of logging-while-drilling and dedicated wireline logging; as well as through the use of a variety of standard coring systems and specialized pressure coring systems. NGHP-01 yielded evidence of gas hydrate from downhole log and core data obtained from all the sites in the Krishna–Godavari Basin, the Mahanadi Basin, and in the Andaman Sea. The site drilled in the Kerala–Konkan Basin during NGHP-01 did not yield any evidence of gas hydrate. Most of the downhole log-inferred gas hydrate and core-recovered gas hydrate were characterized as either fracture-filling in clay-dominated sediments or as pore-filling or grain-displacement particles disseminated in both fine- and coarse-grained sediments. Geochemical analyses of gases obtained from sediment cores recovered during NGHP-01 indicated that the gas in most all of the hydrates in the offshore of India is derived from microbial sources; only one site in the Andaman Sea exhibited limited evidence of a thermogenic gas source. The gas hydrate petroleum system concept has been used to effectively characterize the geologic controls on the occurrence of gas hydrates in the offshore of India.

Marine and Petroleum Geology↗