Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Geophysical Research - Atmospheres”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64Linked to original sources
USGS2012

Comparison of Vibroseis and explosive source methods for deep crustal seismic reflection profiling in the Basin and Range province

Direct comparison of low-fold, high-energy explosive and high-fold, lower-energy Vibroseis methods for acquiring deep crustal seismic reflection data in the Basin and Range Province suggests that the high-fold common midpoint (CMP) method there does not provide the best possible image of lower crustal structure. During the recent acquisition of a Vibroseis profile in the Basin and Range Province we fired single deep shot holes to obtain a coincident single-fold explosive section. Within the upper crust (upper 3 s) the explosive source and Vibroseis records are nearly equivalent. For record times below 3 s, however, comparison of the explosive source gathers and the coincident final 60-fold Vibroseis section demonstrates that low-fold explosive profiling provides a higher-quality image of the midcrust to lower crust (3–10 s). The higher record quality of the explosive sources results primarily from the larger seismic energy levels produced by the explosives, making them less sensitive to common noise sources. Whereas deeper than 4–5 s the Vibroseis energy levels on individual source efforts fall to that of ambient noise levels, the explosions provide signal-generated energy exceeding ambient noise levels down to 18–19 s. Although individual reflections can be correlated on explosion and Vibroseis shot gathers, reflection events on the 60-fold Vibroseis stack do not correlate to those on the single-fold explosion profile, suggesting that the high-fold CMP method in our study did not maintain the integrity of the weak lower crustal reflected arrivals. Reasons why the high-fold CMP method apparently failed include complex, even time-varying, statics, nonhyperbolic moveout at long offsets, and the difficulty in resolving stacking velocities with data having low signal-to-noise ratios. Reflections on the explosion section are longer and imply a greater degree of layering than one would infer from the lower-energy Vibroseis section.

Journal of Geophysical Research↗
USGS2012

Visible and near-infrared (0.4-2.5 μm) reflectance spectra of playa evaporite minerals

Visible and near-infrared (VNIR; 0.4–2.4 μm) reflectance spectra were recorded for 35 saline minerals that represent the wide range of mineral and brine chemical compositions found in playa evaporite settings. The spectra show that many of the saline minerals exhibit diagnostic near-infrared absorption bands, chiefly attributable to vibrations of hydrogen-bonded structural water molecules. VNIR reflectance spectra can be used to detect minor hydrate phases present in mixtures dominated by anhydrous halite or thenardite, and therefore will be useful in combination with X ray diffraction data for characterizing natural saline mineral assemblages. In addition, VNIR reflectance spectra are sensitive to differences in sample hydration state and should facilitate in situ studies of minerals that occur as fragile, transitory dehydration products in natural salt crusts. The use of spectral reflectance measurements in playa studies should aid in mapping evaporite mineral distributions and may provide insight into the geochemical and hydrological controls on playa mineral and brine development.

Journal of Geophysical Research↗
USGS2012

Chemical bonding in the outer core: high-pressure electronic structures of oxygen and sulfur in metallic iron

From its density the outer core is believed to be an alloy of iron and a light element such as sulfur or oxygen. The nature of the light element in the core is an important constraint for theories of the Earth's formation. In this paper the electronic structures of oxygen and sulfur impurities in metallic iron are investigated to determine if pressure, temperature, and composition-induced changes in bonding might affect phase equilibria along the Fe-FeS and Fe-FeO binaries. The electronic structure of sulfur in metallic iron is consistent with the miscibility between Fe and FeS liquids. Volume compression strengthens the Fe-S bond, and it is expected that at sufficiently high pressure, sulfur can substitute for Fe and give solid solution behavior between Fe and FeS. In contrast, the electronic structure of oxygen in metallic iron shows that oxygen cannot act as a substitutional impurity (replacing Fe). This explains the observed miscibility gap on the Fe-FeO binary at 1 atm pressure. Volume compression does not greatly change the electronic structure if oxygen substitutes for iron in bcc and fcc iron. Iron-oxygen bonding does occur, however, if oxygen occupies interstitial sites. Insofar as the molar volume of FeO incorporated as interstitial oxygen in metallic iron is smaller than that of pure FeO, the incorporation of oxygen into metallic iron may be favored under the pressures of the Earth's core.

Journal of Geophysical Research↗
USGS2012

Magnetic susceptibility and relation to initial 87Sr/86Sr for granitoids of the central Sierra Nevada, California

Measurement of the magnetic susceptibility of more than 6000 samples of granitic rock from the Mariposa 1° by 2° quadrangle, which crosses the central part of the Sierra Nevada batholith between 37° and 38°N latitude, shows that magnetic susceptibility values are above 10 −2 SI units in the east and central parts of the batholith and drop abruptly to less than 10 −3 SI units in the western foothills. In a narrow transitional zone, intermediate values (10 −3 to 10 −2 ) prevail. Magnetic susceptibility appears to decrease slightly westward within the zones of both high and low values. Magnetic susceptibility in plutonic rocks is chiefly a function of the abundance of magnetite, which depends, in turn, on the total iron content of the rocks and their oxidation ratio. Lower magnetic susceptibilities of felsic members of Sierran intrusive suites and of some felsic rock units relative to adjacent mafic rock units commonly reflect differences in total iron content, but the differences of magnetic susceptibility that define the regional pattern generally are much larger and are determined chiefly by the oxidation ratios of the rocks. The relatively unaltered condition of the samples and restriction of δ 18 O to the range of +7 to +10.3‰ indicate that neither hydrothermal fluids nor subsolidus alteration were important in modifying oxidation ratios. Correlations of magnetic susceptibility with initial 87 Sr/ 86 Sr suggest that oxidation ratios have been inherited from the source regions for the magmas from which the rocks crystallized. Reduction of Fe 3+ to Fe 2+ by organic carbon or other reducing substances may also have affected magnetic susceptibility.

Journal of Geophysical Research↗
USGS2012

Rift flank uplifts and Hinterland Basins: Comparison of the Transantarctic Mountains with the Great Escarpment of southern Africa

Uplifted rift margins are a common feature of continents and oceans. Two variants of rift flank morphologies have been recognized: One in which the topography warps down from an inland high toward the continental margin, and one where the tropographic peak lies close to the continental margin. The Great Escarpment of southern Africa and the Transantarctic Mountains are examples of the first and the second variants of rift flanks, respectively. Both rift flanks are bordered on their landward side by broad continental basins: the Kalahari and the Wilkes hinterland basins. If these basins are interpreted as flexural “outer lows” that deepen in unison with the uplift of the rift flanks, the lithosphere on the uplifted side is very rigid in both cases (elastic thickness T e of 100 ± 20 km for southern Africa and 110 ± 20 km for East Antarctica). We suggest that the variation in rift flank morphology is caused by the isostatic response to uplift forces of elastic plates sharing different boundary conditions. We model the uplift of the Transantarctic Mountains as an upward deflection of an elastic plate which is broken at the front of the Transantarctic Mountains, and we model the uplift of the Great Escarpment as an upward deflection of a continuous elastic plate that is modified by the downward load of sediments on the continental margin. Although the Transantarctic Mountain uplift is young (60–0 Ma) and the southern African uplift is old (<100 Ma), the different isostatic responses of the two margins are not a function of age, because most loading (sedimentation) and unloading (erosion) took place shortly after rifting. Detailed modeling of topography, gravity, geological markers, and the locations of depocenters suggests that lithospheric rigidity decreases under the Transantarctic Mountains, whereas in southern Africa the decrease occurs not under the Great Escarpment but far seaward under the continental shelf and slope. If the distribution of lithospheric rigidity is indicative of the thermal regime of the lithosphere, then uplifted rift flanks are not always underlain by a thermal anomaly. This and other geological evidence indicate that a single mechanism cannot explain the uplift of both the Antarctic and the African margins.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Variations in the reflectivity of the moho transition zone beneath the Midcontinent Rift System of North America: results from true amplitude analysis of GLIMPCE data

True amplitude processing of The Great Lakes International Multidisciplinary Program on Crustal Evolution seismic reflection data from the Midcontinent Rift System of North America shows large differences in the reflectivity of the Moho transition zone beneath the axial rift, beneath the rift flanks, and outside of the rift. The Moho reflection from the axial rift has a discontinuous, diffractive character marginally stronger (several decibels) than an otherwise transparent lower crust and upper mantle. Beneath the axial rift, Moho is interpreted to be a synrift igneous feature. Beneath the rift flanks, the reflectivity of the Moho transition is generally well developed with two identifiable boundaries, although in places it is weakly reflective to nonreflective, similar to Moho outside the rift. The two boundaries are interpreted as the base of essentially intact, although stretched, prerift Archean crust (upper boundary) and new synrift Moho 1-2 s (6-7 km) deeper (lower boundary). Beneath the rift flanks, the layered reflection Moho transition results from the preexisting crustal composition and fabric modified by synrift igneous processes and extensional tectonic/metamorphic processes. The geologic evidence for extensive basaltic magmatism in the rift is the basis for interpreting the Moho signature as a Keweenawan structure that has been preserved for 1.1 b.y. Extension and magmatism appear to enhance reflectivity in the lower crust and Moho transition zone only where stretching factors are moderate (rift flanks) and not where they are extreme (axial rift). This leads to the prediction that the reflectivity across analogous volcanic passive continental margins should be greatest beneath the moderately stretched continental shelves and should decrease towards the ocean-continent boundary.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Strain accumulation across the Wasatch Fault near Ogden, Utah

Deformation of a 70 by 40‐km trilateration network spanning the north trending Wasatch fault near Ogden, Utah, has been monitored from 1972 through 1990. All but nine of the 200 measurements are consistent with deformation that is linear in time. We presume that those nine observations are contaminated by some blunder in making the measurements and that deformation is linear in time. The strain rate over the 1972–1990 interval across a 40‐km‐wide zone west of the Wasatch fault (hanging wall block) is adequately approximated by a 0.04 ± 0.01 μstrain/yr N85°E±5° uniaxial extension. Adequate coverage of the footwall block is available only over the 1981–1990 interval, and the strain rate across a 30‐km‐wide zone there is approximated by a 0.07 ± 0.03 μstrain/yr N20°E±12° uniaxial extension. The observed extension of the hanging wall block in the direction normal to fault strike suggests that the Wasatch fault may be listric; a planar fault would produce a zone of contraction normal to the fault at the surface of the hanging wall block. The component of extension parallel to fault strike observed on the footwall block is unexplained.

Utah↗
USGS2012

Thin, low‐velocity crust beneath the southern Yukon‐Tanana Terrane, east central Alaska: Results from Trans‐Alaska crustal transect refraction/wide‐angle reflection data

A seismic refraction/wide‐angle reflection survey for the Trans‐Alaska Crustal Transect program reveals a thin, reflective crust beneath the southern Yukon‐Tanana terrane (YTT) in east central Alaska. These data are the first detailed refraction survey of the southern YTT and compose a 130‐km‐long reversed profile along the Alaska and Richardson highways. Results from this study indicate that low‐velocity (≤ 6.4 km/s) rocks extend to approximately 27 km in depth. Based on these low velocities and an average Poisson's ratio of 0.23 determined for depths of ≤27 km, an overall silicic composition is interpreted for this portion of the crust beneath the Yukon‐Tanana terrane. From approximately 8 to 27 km depth the crust exhibits an increase in reflectivity. This middle to lower crustal reflectivity is modeled as alternating high‐ and low‐velocity lamellae with an average velocity of 6.1 km/s at 10 km depth to an average velocity of 6.4 km/s at 27 km depth. Beneath these reflective, low‐velocity rocks a 3‐ to 5‐km‐thick, 7.0 km/s basal crustal layer produces a prominent reflection that extends to offsets of up to 280 km. The crust‐mantle boundary, modeled at an average depth of 30 km, produces a variable PmP reflection, which may indicate lateral heterogeneity of this boundary, and a weak and emergent Pn refraction with a velocity of 8.2 km/s. We interpret the crustal section as follows: the low‐velocity rocks of the southern YTT extend from the surface to depths of approximately 10 km; underthrust Mesozoic flysch of the Kahiltna terrane, rocks of the Gravina arc, and basement of the Wrangellia(?) terrane extend from 10 to 27 km depth; a 3‐ to 5‐km‐thick layer of mantle‐derived mafic rocks, relic oceanic crust, or Wrangellia(?) terrane lower crust extends from 27 to approximately 30 km depth; a tectonically young Moho beneath the southern YTT is found at an average depth of 30 km; and it is underlain by a mantle that may be relatively cool and/or olivine rich. In this interpretation, the Yukon‐Tanana terrane is a thin‐skinned terrane. Our results indicate that tectonic, and possibly magmatic, underplating has played a significant role in crustal growth for central Alaska.

Alaska↗
USGS2012

Seismicity and geometry of a 110‐km‐long blind thrust fault 1. The 1985 Kettleman Hills, California, earthquake

The August 4, 1985, Kettleman Hills earthquake was the third in a sequence of moderate shocks to occur beneath the northern half of a 110‐km‐long fold chain bounding the eastern California Coast Ranges. The 1982 M W =5.4 New Idria, 1983 M W =6.5 Coalinga, and 1985 M W =6.1 Kettleman Hills events define a southward progression of seismic activity beneath the fold. We use teleseismic waveforms, geodetic modeling, hypocenters relocated in a three‐dimensional velocity model, and subsurface structural data to investigate the Kettleman Hills earthquake. The main shock results from motion on a shallowly dipping thrust fault buried at ∼10 km depth. Aftershocks and coseismic fault slip extend 20 km along the fold axis, nearly the full extent of the Kettleman Hills North Dome anticline. Aftershocks occur primarily several kilometers in front of the fault tip and in the core of the anticline. The main shock and several foreshocks occurred at a 2‐km right step in the Quaternary fold axis, which also corresponds to the southern end of the 1983 Coalinga and northern end of the 1985 Kettleman Hills aftershock zones. From this we infer that the step in the fold is caused by an offset or tear in the underlying fault. The scalar seismic moment is 1.6 × 10 18 N m, consistent with the geodetic deformation, and the duration of rupture is 16 s, 3–4 times greater than for the average earthquake with this scalar moment. The slow rate of moment release provides an explanation for the low level of ground shaking and low local magnitude reported for the event. The peak of the geodetic uplift is located 5 km perpendicular to the Quaternary fold axis. We argue that the fault is propagating northeast into the undeformed San Joaquin Valley sediments and that the overlying fold is growing at about 0.5 mm/yr.

California↗
USGS2012

Application of continuum models to deformation of the Aleutian Island Arc

Continuum models were constructed to describe large‐scale deformation of the Aleutian Island Arc over the past 5 m.y. These models consider the island arc as a continuum in the horizontal plane with the velocity boundary condition at the Pacific edge stated as a fraction of Pacific plate convergence transferred to the arc. First, a simple model of uniformly distributed strain is formulated to illustrate the mechanics of continuous deformation. Lineaments along the arc massif rotated about a vertical axis are matched by small‐element rotation calculated from the model. However, this model does not predict across‐arc variations in deformation and produces an unrealistic amount of crustal thickening after 5 m.y. A physically more meaningful model of deformation is the thin viscous sheet model based on averages of stress and rheology throughout the lithosphere. The amount of motion transferred from the Pacific plate to the arc is constrained by the rotated lineaments, while the effective stress‐strain exponent ( n ) and the ability the lithosphere has to sustain crustal thickness contrasts (the Argand number) are independent variables. Primarily, bathymetry, earthquake focal mechanisms, and styles of faulting are used to evaluate the models. The preferred model is one where the amount of motion transferred from the Pacific plate is greater in an arc‐parallel direction than in an arc‐normal direction, producing stresses consistent with strike‐slip faulting at the far western end of the arc and tensional stresses consistent with transverse normal faulting elsewhere in the arc massif. This model agrees with observations of slip vectors by Ekström and Engdahl (1989), who conclude that a portion of the arc‐parallel component of relative plate motion is taken up in the overriding plate. This model implies that compressive stress transferred to the arc is small in comparison to along‐arc shear stress and that stresses conducive to strikeslip faulting are prevalent throughout the arc.

Alaska↗
USGS2012

Shear stress and bed roughness estimates for combined wave and current flows over a rippled bed

High‐quality bottom boundary layer measurements and bottom photographs were obtained over a sand substrate during a 10‐day deployment of the GEOPROBE tripod at an inner shelf (35‐m water depth) location off northern California. The seafloor surrounding the tripod was composed of well‐sorted medium‐grained (mean diameter, 0.25 mm) sand which was formed into symmetrical wave ripples with heights of 3–4 cm and wavelengths of 22–30 cm. Mean velocity profiles in the region from 23 cm to 102 cm above the rippled bed were highly logarithmic ( R > 0.95) approximately 30% of the time. Nineteen profiles exhibiting R > 0.997 were analyzed to obtain the shear velocity ( U * c ) and roughness length (Z 0 c ) for the mean current. The near‐bottom flow field was composed of quasi‐steady currents (up to 12 cm s −1 at z = 102 cm) and wave‐induced, oscillatory currents (up to 14 cm s −1 ). The data‐derived estimates of U * c and Z 0 c were 0.3–0.93 cm s −1 and 0.82–1.5 cm, respectively. The mean shear estimates are 50–100% larger than those predicted using a drag coefficient ( C D ) of 3 × 10 −3 that is typical for rough boundaries, and the roughness lengths are up to an order of magnitude larger than the maximum expected values based on the observed wave‐rippled bottom. These results indicate the importance of the combined flow turbulent interaction in producing a large apparent Z 0 c . However, comparison of the shear and roughness estimates derived from the velocity profile analysis to predictions made by the combined flow model of Grant and Madsen (1979) show that direct application of the wave‐ripple roughness equation of Grant and Madsen (1982) yields large overestimates of z 0 c and U * c . Selecting the physical roughness length k b (=30 z 0 ) that produced the best agreement with the data resulted in z 0 values ranging from 0.03 to 0.43 cm. Moreover, a direct correlation exists between these physical roughness estimates and the angle (θ cr ) formed by the mean current and the trend of the wave ripple crests. A simple linear relationship between k b and θ cr is suggested by our limited data set.

California↗
USGS2012

A model for the generation of two-dimensional surf beat

A finite difference model predicting group-forced long waves in the nearshore is constructed with two interacting parts: an incident wave model providing time-varying radiation stress gradients across the nearshore, and a long-wave model which solves the equations of motion for the forcing imposed by the incident waves. Both shallow water group-bound long waves and long waves generated by a time-varying breakpoint are simulated. Model-generated time series are used to calculate the cross correlation between wave groups and long waves through the surf zone. The cross-correlation signal first observed by Tucker (1950) is well predicted. For the first time, this signal is decomposed into the contributions from the two mechanisms of leaky mode forcing. Results show that the cross-correlation signal can be explained by bound long waves which are amplified, though strongly modified, through the surf zone before reflection from the shoreline. The breakpoint-forced long waves are added to the bound long waves at a phase of pi/2 and are a secondary contribution owing to their relatively small size.

Journal of Geophysical Research C: Oceans↗
USGS2012

Reconciliation of stress and structural histories of the Tharsis region of Mars

We present a new compilation of the structural and stratigraphic evolution of the Tharsis region of Mars that incorporates recent advances in understanding its stratigraphy, and we introduce a lithospheric deformation model that can account for the observations. The first period in the formation of Tharsis occurred in Late Noachian/Early Hesperian time with the deposition of volcanic plains materials throughout the surrounding highlands (e.g., Lunae Planum) and on the Tharsis rise (which includes the giant volcanoes and surrounding, elevated lava fields). Extensive radial normal faulting occurred on the rise, locally extending outward at Valles Marineris and Tempe Terra, and concentric wrinkle ridges formed along the edge of the rise. This regional deformation appears to have been modulated by a global compressional stress field due to rapid planetary cooling and contraction. The second period occurred during the Late Hesperian/Amazonian with Tharsis volcanism centered on the rise and radial extensional deformation that extended from the center of the rise for thousands of kilometers. We propose a model in which the lithosphere beneath Tharsis consists of a thin elastic crustal cap on the rise that is mechanically detached from the strong upper mantle by a volcanically thickened, hot, weak lower crust. These layers merge into a single cooler, strong lithospheric layer around the edges of the rise. This model is capable of generating large extensional hoop stresses throughout much of the western hemisphere, in agreement with observations. The tectonic interpretation of the stresses predicted by this model requires the reconciliation of extensional strain within narrow grabens and compressional strain within wrinkle ridges with (1) processes in the deeper lithosphere, (2) the sparsity of strike-slip faults, and (3) other global or locally important stress fields. Stresses predicted by global models affect the entire thickness of the lithosphere, and they can be reconciled with narrow, closely spaced grabens that accommodate large amounts of extensional strain in the upper few kilometers of the lithosphere if the grabens are underlain and kinematically linked with dikes or other tension cracks, such as hydrofractures. Deeper levels of the lithosphere can accommodate this strain by elastic expansion if grabens are spaced far apart (many tens to hundreds of kilometers). Mechanical considerations suggest that deformation on faults beneath wrinkle ridges could extend through a significant thickness of the brittle crust. A number of factors, including stresses generated by the addition of overburden, intrusion of dikes, weakness of geologic materials under extension, and the laterally constrained nature of a single lithospheric plate, may have inhibited the formation of strike-slip faults on Mars. Stresses generated from the removal of overburden could have augmented planetwide wrinkle ridge formation during the Late Noachian/Early Hesperian and in Kasei Valles and western Chryse Planitia during the Early Amazonian. The nonuniform distribution of tectonic features around Tharsis can be understood in terms of the concentration of regional stresses and strain near weaker volcanotectonic centers.

Journal of Geophysical Research↗
USGS2012

Tektites in Cretaceous-Tertiary boundary rocks on Haiti and their bearing on the Alvarez impact extinction hypothesis

Relic tektites are associated with a Pt-group metal abundance anomaly and shocked minerals in a thin marl bed that marks the K-T boundary on Haiti. The presence of these three impact-produced materials at the precise K-T boundary enormously strengthens the Alvarez impact extinction hypothesis. The tektites occur in smectite spherules that have external shapes typical of tektites. Their chemical and physical properties are broadly similar to those of other tektite groups, except that the Haitian tektites have lower Si and higher Fe, Ca, and Na. On average, they contain more Sc, V, Cu, Zn, Ga, Sr, Sn, and Ba and less Cr, Ni, Co, B, Mn, and Hf than Other tektite groups. Amounts of rare earth elements (REE) in the tektites indicate that their progenitor materials were not melted mafic or ultramafic oceanic crust; rather they were sedimentary deposits having a bulk composition of andesite. Rare tektites contain unusually high amounts of CaO (∼20%) and S (0.4%), and these data suggest that some target materials consisted of CaSO 4 . Anhydrite beds occur in the subsurface at two candidate impact sites (Chicxulub and Manson). Sm-Nd isotopic data for the tektites indicate that the melted precursor sediments were most likely deposited less than −400 m.y. between the Late Cretaceous and Silurian periods. Major chemical changes accompanied the diagenetic change of glass to smectite. The Haitian tektites are the first datable impact products in K-T boundary rocks, and 40 Ar- 39 Ar ages of the glass show that the K-T boundary and impact event are coeval at 64.5±0.1 Ma.

Journal of Geophysical Research↗
USGS2012

Limitations of quantitative analysis of deep crustal seismic reflection data: Examples from GLIMPCE

Amplitude preservation in seismic reflection data can be obtained by a relative true amplitude (RTA) processing technique in which the relative strength of reflection amplitudes is preserved vertically as well as horizontally, after compensating for amplitude distortion by near-surface effects and propagation effects. Quantitative analysis of relative true amplitudes of the Great Lakes International Multidisciplinary Program on Crustal Evolution seismic data is hampered by large uncertainties in estimates of the water bottom reflection coefficient and the vertical amplitude correction and by inadequate noise suppression. Processing techniques such as deconvolution, F-K filtering, and migration significantly change the overall shape of amplitude curves and hence calculation of reflection coefficients and average reflectance. Thus lithological interpretation of deep crustal seismic data based on the absolute value of estimated reflection strength alone is meaningless. The relative strength of individual events, however, is preserved on curves generated at different stages in the processing. We suggest that qualitative comparisons of relative strength, if used carefully, provide a meaningful measure of variations in reflectivity. Simple theoretical models indicate that peg-leg multiples rather than water bottom multiples are the most severe source of noise contamination. These multiples are extremely difficult to remove when the water bottom reflection coefficient is large (>0.6), a condition that exists beneath parts of Lake Superior and most of Lake Huron.

Great Lakes↗
USGS2012

Interseismic deformation at the Nankai Trough, Japan, subduction zone

Uplift along the coast of southwestern Japan following the 1944 Tonankai ( M s = 8.0) and 1946 Nankaido ( M s = 8.2) earthquakes has been inferred from the 1950–1985 tide gage records. Although uplift rates vary with geographic position, the temporal dependence at each site can be described as the superposition of an exponentially decaying (time constant ∼5 years) transient, significant only in the first decade postseismic, and a steady interseismic rate. The steady interseismic uplift rate is defined only over the 1956–1985 interval, but the linearity in time ofthat uplift record is such that uplift over the remainder of the interseismic cycle (∼80 years) might reasonably be expected to occur at the same rate. Moreover, the spatial pattern and magnitude of the steady uplift rate are reasonably close to those predicted by a simple dislocation model of subduction. However, the currently observed steady uplift rate is not consistent with the uplift rate inferred from geodetic leveling for the final half of the previous earthquake cycle. Thus, either the hypothesis of a steady interseismic uplift rate after the first decade postseismic is wrong or the strain accumulation pattern for one earthquake need not be the same as for the preceding earthquake on the same segment.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Seismic constraints on the nature of lower crustal reflectors beneath the extending Southern Transition Zone of the Colorado Plateau, Arizona

We determine the reflection polarity and exploit variations in P and S wave reflectivity and P wave amplitude versus offset (AVO) to constrain the origin of lower crustal reflectivity observed on new three-component seismic data recorded across the structural transition of the Colorado Plateau. The near vertical incidence reflection data were collected by Stanford University in 1989 as part of the U.S. Geological Survey Pacific to Arizona Crustal Experiment that traversed the Arizona Transition Zone of the Colorado Plateau. The results of independent waveform modeling methods are consistent with much of the lower crustal reflectivity resulting from thin, high-impedance layers. The reflection polarity of the cleanest lower crustal events is positive, which implies that these reflections result from high-velocity contrasts, and the waveform character indicates that the reflectors are probably layers less than or approximately equal to 200 m thick. The lower crustal events are generally less reflective to incident S waves than to P waves, which agrees with the predicted behavior of high-velocity mafic layering. Analysis of the P wave AVO character of lower crustal reflections demonstrates that the events maintain a constant amplitude with offset, which is most consistent with a mafic-layering model. One exception is a high-amplitude (10 dB above background) event near the base of lower crustal reflectivity which abruptly decreases in amplitude at increasing offsets. The event has a pronounced S wave response, which along with its negative AVO trend is a possible indication of the presence of fluids in the lower crust. The Arizona Transition Zone is an active but weakly extended province, which causes us to discard models of lower crustal layering resulting from shearing because of the high degree of strain required to create such layers. Instead, we favor horizontal basaltic intrusions as the primary origin of high-impedance reflectors based on (1) The fact that most xenoliths in eruptive basalts of the Transition Zone are of mafic igneous composition, (2) indications that a pulse of magmatic activity crossed the Transition Zone in the late Tertiary period, and (3) the high regional heat flow observed in the Transition Zone. The apparent presence of fluids near the base of the reflective zone may indicate a partially molten intrusion. We present a mechanism by which magma can be trapped and be induced to intrude horizontally at rheologic contrasts in extending crust.

Arizona↗
USGS2012

Paleomagnetism and geochronology of 23 Ma gabbroic intrusions in the Keku Strait, Alaska, and implications for the Alexander Terrane

Samples of Tertiary gabbro from 24 sites in the Keku Strait, Alaska, help constrain the displacement history of the Alexander terrane. Step heating experiments on a plagioclase separate from these previously undated intrusions indicate a discordant 40 Ar/ 39 Ar age of 23.1 ± 1.7 Ma. The characteristic magnetization resides in magnetite, is easily isolated by thermal and alternating field demagnetization, and has both normal and reversed polarities. The mean paleomagnetic pole, with no structural correction, is latitude 87.1°N, longitude 141.6°E, A 95 = 10.1°, with N = 20 sites. This pole indicates insignificant tectonic displacement (0.5° ± 8.2° southward) and rotation (0.6° ± 15.2° counterclockwise). We therefore conclude that any northward displacement or vertical axis rotation of the Alexander terrane, and/or tilting in the vicinity of the Keku Strait must have occurred before 23 Ma.

Alaska↗