Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Interpretation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64Linked to original sources
USGS2002

Digital recovery, modification, and analysis of Tetra Tech seismic horizon mapping, National Petroleum Reserve Alaska (NPRA), northern Alaska

We have digitized, modified, and analyzed seismic interpretation maps of 12 subsurface stratigraphic horizons spanning portions of the National Petroleum Reserve in Alaska (NPRA). These original maps were prepared by Tetra Tech, Inc., based on about 15,000 miles of seismic data collected from 1974 to 1981. We have also digitized interpreted faults and seismic velocities from Tetra Tech maps. The seismic surfaces were digitized as two-way travel time horizons and converted to depth using Tetra Tech seismic velocities. The depth surfaces were then modified by long-wavelength corrections based on recent USGS seismic re-interpretation along regional seismic lines. We have developed and executed an algorithm to identify and calculate statistics on the area, volume, height, and depth of closed structures based on these seismic horizons. These closure statistics are tabulated and have been used as input to oil and gas assessment calculations for the region. Directories accompanying this report contain basic digitized data, processed data, maps, tabulations of closure statistics, and software relating to this project.

Open-File Report↗
USGS2003

A compendium of P- and S-wave velocities from surface-to-borehole logging; summary and reanalysis of previously published data and analysis of unpublished data

For over 28 years, the U.S. Geological Survey (USGS) has been acquiring seismic velocity and geologic data at a number of locations in California, many of which were chosen because strong ground motions from earthquakes were recorded at the sites. The method for all measurements involves picking first arrivals of P- and S-waves from a surface source recorded at various depths in a borehole (as opposed to noninvasive methods, such as the SASW method [e.g., Brown et al., 2002]). The results from most of the sites are contained in a series of U.S. Geological Survey Open-File Reports (see References). Until now, none of the results have been available as computer files, and before 1992 the interpretation of the arrival times was in terms of piecemeal interval velocities, with no attempt to derive a layered model that would fit the travel times in an overall sense (the one exception is Porcella, 1984). In this report I reanalyze all of the arrival times in terms of layered models for P- and for S-wave velocities at each site, and I provide the results as computer files. In addition to the measurements reported in the open-file reports, I also include some borehole results from other reports, as well as some results never before published. I include data for 277 boreholes (at the time of this writing; more will be added to the web site as they are obtained), all in California (I have data from boreholes in Washington and Utah, but these will be published separately). I am also in the process of interpreting travel time data obtained using a seismic cone penetrometer at hundreds of sites; these data can be interpreted in the same way of those obtained from surface-to-borehole logging. When available, the data will be added to the web site (see below for information on obtaining data from the World Wide Web (WWW)). In addition to the basic borehole data and results, I provide information concerning strong-motion stations that I judge to be close enough to the boreholes that the borehole velocity models can be used as the velocity models beneath the stations.

California↗
USGS2003

Sequence-Stratigraphic Analysis of the Regional Observation Monitoring Program (ROMP) 29A Test Corehole and Its Relation to Carbonate Porosity and Regional Transmissivity in the Floridan Aquifer System, Highlands County, Florida

An analysis was made to describe and interpret the lithology of a part of the Upper Floridan aquifer penetrated by the Regional Observation Monitoring Program (ROMP) 29A test corehole in Highlands County, Florida. This information was integrated into a one-dimensional hydrostratigraphic model that delineates candidate flow zones and confining units in the context of sequence stratigraphy. Results from this test corehole will serve as a starting point to build a robust three-dimensional sequence-stratigraphic framework of the Floridan aquifer system. The ROMP 29A test corehole penetrated the Avon Park Formation, Ocala Limestone, Suwannee Limestone, and Hawthorn Group of middle Eocene to Pliocene age. The part of the Avon Park Formation penetrated in the ROMP 29A test corehole contains two composite depositional sequences. A transgressive systems tract and a highstand systems tract were interpreted for the upper composite sequence; however, only a highstand systems tract was interpreted for the lower composite sequence of the deeper Avon Park stratigraphic section. The composite depositional sequences are composed of at least five high-frequency depositional sequences. These sequences contain high-frequency cycle sets that are an amalgamation of vertically stacked high-frequency cycles. Three types of high-frequency cycles have been identified in the Avon Park Formation: peritidal, shallow subtidal, and deeper subtidal high-frequency cycles. The vertical distribution of carbonate-rock diffuse flow zones within the Avon Park Formation is heterogeneous. Porous vuggy intervals are less than 10 feet, and most are much thinner. The volumetric arrangement of the diffuse flow zones shows that most occur in the highstand systems tract of the lower composite sequence of the Avon Park Formation as compared to the upper composite sequence, which contains both a backstepping transgressive systems tract and a prograding highstand systems tract. Although the porous and permeable layers are not thick, some intervals may exhibit lateral continuity because of their deposition on a broad low-relief ramp. A thick interval of thin vuggy zones and open faults forms thin conduit flow zones mixed with relatively thicker carbonate-rock diffuse flow zones between a depth of 1,070 and 1,244 feet below land surface (bottom of the test corehole). This interval is the most transmissive part of the Avon Park Formation penetrated in the ROMP 29A test corehole and is included in the highstand systems tract of the lower composite sequence. The Ocala Limestone is considered to be a semiconfining unit and contains three depositional sequences penetrated by the ROMP 29A test corehole. Deposited within deeper subtidal depositional cycles, no zones of enhanced porosity and permeability are expected in the Ocala Limestone. A thin erosional remnant of the shallow marine Suwannee Limestone overlies the Ocala Limestone, and permeability seems to be comparatively low because moldic porosity is poorly connected. Rocks that comprise the lower Hawthorn Group, Suwannee Limestone, and Ocala Limestone form a permeable upper zone of the Upper Floridan aquifer, and rocks of the lower Ocala Limestone and Avon Park Formation form a permeable lower zone of the Upper Floridan aquifer. On the basis of a preliminary analysis of transmissivity estimates for wells located north of Lake Okeechobee, spatial relations among groups of relatively high and low transmissivity values within the upper zone are evident. Upper zone transmissivity is generally less than 10,000 feet squared per day in areas located south of a line that extends through Charlotte, Sarasota, DeSoto, Highlands, Polk, Osceola, Okeechobee, and St. Lucie Counties. Transmissivity patterns within the lower zone of the Avon Park Formation cannot be regionally assessed because insufficient data over a wide areal extent have not been compiled.

Open-File Report↗
USGS2003

Lithologic coring in the lower Anacostia tidal watershed, Washington, D.C., July 2002

Little is known about the volumetric flux of ground water to the lower tidal Anacostia River, or whether ground-water flow is an important component of the contaminant load in this part of the Anacostia River. The watershed is in the eastern part of Washington, D.C., and has been subjected to over 200 years of urbanization and modifications of the river channel and nearby land areas. These anthropogenic factors, along with tidal fluctuations in the river, make ground-water data collection and interpretations difficult. The U.S. Geological Survey is cooperating with the District of Columbia Department of Health, Environmental Health Administration, Bureau of Environmental Quality, Water Quality Division, in a study to assess nonpoint-source pollution from ground water into the lower tidal Anacostia River. Lithologic cores from drilling activities conducted during July 2002 in the study area have been interpreted in the context of geologic and hydrogeologic information from previous studies in the lower Anacostia tidal watershed. These interpretations can help achieve the overall project goals of characterizing ground-water flow and contaminant load in the study area. Hydrostratigraphic units encountered during drilling generally consisted of late Pleistocene to Holocene fluvial deposits overlying Cretaceous fluvial/deltaic deposits. Cores collected in Beaverdam Creek and the Anacostia River indicated high- and low-energy environments of deposition, respectively. Two cores collected near the river showed different types of anthropogenic fill underlain by low-energy deposits, which were in turn underlain by sand and gravel. A third core collected near the river consisted primarily of sand and gravel with no artificial fill.

Washington DC↗
USGS2004

Selected natural attenuation monitoring data, Operable Unit 1, Naval Undersea Warfare Center, Division Keyport, Washington, June 2002

Previous investigations indicated that natural attenuation and biodegradation of chlorinated volatile organic compounds (CVOCs) are substantial in shallow ground water beneath the 9-acre former landfill at Operable Unit 1 (OU 1), Naval Undersea Warfare Center (NUWC), Division Keyport, Washington. The U.S. Geological Survey (USGS) has continued to monitor ground-water geochemistry to assure that conditions remain favorable for contaminant biodegradation. This report presents the geochemical and selected CVOC data for ground water at OU 1, collected by the USGS during June 10-14, 2002, in support of long-term monitoring for natural attenuation. Overall, the geochemical data for June 2002 indicate that redox conditions in the upper-aquifer water remain favorable for reductive dechlorination of chlorinated VOCs because strongly reducing conditions persisted beneath much of the former landfill. Redox conditions in the intermediate aquifer downgradient of the landfill also remained favorable for reductive dechlorination, although the 2002 dissolved hydrogen (H2) concentration from well MW1-28 is questionable. Changes in redox conditions were observed at certain wells during 2002, but a longer monitoring period and more thorough interpretation are needed to ascertain if phytoremediation activities are affecting redox conditions and if biodegradation processes are changing over time. The Navy intends to complete a more thorough interpretation in preparation for the 5-year review of OU 1 scheduled for 2004. There were a few substantial differences between the 2002 concentrations and previously observed concentrations of volatile organic compounds. Total CVOC concentrations in 2002 samples decreased substantially in all piezometers sampled in the northern plantation, and the largest percentages of decrease were for the compounds trichloroethene (TCE) and cis-1,2-dichloroethene (cis-DCE). Changes in total CVOC concentrations in the southern plantation were less consistent. Historically high concentrations were observed in samples from three piezometers, with particularly substantial increases in TCE and cis-DCE concentrations, and historically low concentrations were observed in two piezometers, with particularly substantial decreases in TCE and cis-DCE concentrations. Similarly to the redox chemistry, a longer monitoring period and more thorough interpretation are needed to ascertain if phytoremediation activities are affecting CVOC concentrations and if biodegradation processes are changing over time. No changes in monitoring plans are proposed for June 2003, although the practice of deploying a data sonde downhole while purging the wells will be discontinued. Downhole monitoring added uncertainty to selected measured dissolved H2 concentrations because of the possibility that the sonde and cable created a bridge that resulted in non-equilibrium dissolved H2 concentrations at the wells.

Open-File Report↗
USGS2005

Early to middle Jurassic salt in Baltimore Canyon trough

A pervasive, moderately deep (5-6 s two-way traveltime), high-amplitude reflection is traced on multichannel seismic sections over an approximately 7500 km² area of Baltimore Canyon Trough. The layer associated with the reflection is about 25 km wide, about 60 m thick in the center, and thins monotonically laterally, though asymmetrically, at the edges. Geophysical characteristics are compatible with an interpretation of this negative-polarity reflector as a salt lens deposited on the top of a synrift evaporite sequence. However, alternative interpretations of the layer as gas-saturated sediments, an overpressured shale, or a weathered igneous intrusion are also worthy of consideration. Geophysical analyses were made on three wavelet- and true-amplitude processed multichannel seismic dip lines. The lens-shaped layer demarked by the reflection has a velocity of 4.4 km/s; the lens lies within strata having velocities of 5.3 to 5.7 km/s. A trough marking the onset of the lens has an amplitude that is 10 to 20 db greater than reflections from the encasing layers and an apparent reflection coefficient of -0.24. Using amplitude versus offset analysis methods, we determined that observed reflection coefficients, though variable, decrease consistently with respect to increasing offset. Linear inversion yields a low density, about 2.2 g/cc . Integration of one of the true-amplitude-processed lines and one-dimensional modeling of the layer provide data on the impedance contrast and interference patterns that further reinforce the salt lens interpretation. The thin, horizontal salt lens was probably deposited or precipitated during the Jurassic in a shallow, narrow (peripheral) rift basin, as rifting progressed down the North Atlantic margin. Unlike thicker deposits in other areas that deformed and flowed, often into diapir structures, this thin lens has remained relatively undisturbed since deposition.

Baltimore Canyon trough↗
USGS2006

Geophysical studies of the Crump Geyser known geothermal resource area, Oregon, in 1975

The U.S. Geological Survey (USGS) conducted geophysical studies in support of the resource appraisal of the Crump Geyser Known Geothermal Resource Area (KGRA). This area was designated as a KGRA by the USGS, and this designation became effective on December 24, 1970. The land classification standards for a KGRA were established by the Geothermal Steam Act of 1970 (Public Law 91-581). Federal lands so classified required competitive leasing for the development of geothermal resources. The author presented an administrative report of USGS geophysical studies entitled 'Geophysical background of the Crump Geyser area, Oregon, KGRA' to a USGS resource committee on June 17, 1975. This report, which essentially was a description of geophysical data and a preliminary interpretation without discussion of resource appraisal, is in Appendix 1. Reduction of sheets or plates in the original administrative report to page-size figures, which are listed and appended to the back of the text in Appendix 1, did not seem to significantly degrade legibility. Bold print in the text indicates where minor changes were made. A colored page-size index and tectonic map, which also show regional geology not shown in figure 2, was substituted for original figure 1. Detailed descriptions for the geologic units referenced in the text and shown on figures 1 and 2 were separately defined by Walker and Repenning (1965) and presumably were discussed in other reports to the committee. Heavy dashed lines on figures 1 and 2 indicate the approximate KGRA boundary. One of the principal results of the geophysical studies was to obtain a gravity map (Appendix 1, fig. 10; Plouff, and Conradi, 1975, pl. 9), which reflects the fault-bounded steepness of the west edge of sediments and locates the maximum thickness of valley sediments at about 10 kilometers south of Crump Geyser. Based on the indicated regional-gravity profile and density-contrast assumptions for the two-dimensional profile, the maximum sediment thickness was estimated at 820 meters. A three-dimensional gravity model would have yielded a greater thickness. Audiomagnotelluric measurements were not made as far south as the location of the gravity low, as determined in the field, due to a lack of communication at that time. A boat was borrowed to collect gravity measurements along the edge of Crump Lake, but the attempt was curtailed by harsh, snowy weather on May 21, 1975, which shortly followed days of hot temperature. Most of the geophysical data and illustrations in Appendix 1 have been published (Gregory and Martinez, 1975; Plouff, 1975; and Plouff and Conradi, 1975), and Donald Plouff (1986) discussed a gravity interpretation of Warner Valley at the Fall 1986 American Geophysical Union meeting in San Francisco. Further interpretation of possible subsurface geologic sources of geophysical anomalies was not discussed in Appendix 1. For example, how were apparent resistivity lows (Appendix 1, figs. 3-6) centered near Crump Geyser affected by a well and other manmade electrically conductive or magnetic objects? What is the geologic significance of the 15-milligal eastward decrease across Warner Valley? The explanation that the two-dimensional gravity model (Appendix 1, fig. 14) was based on an inverse iterative method suggested by Bott (1960) was not included. Inasmuch as there was no local subsurface rock density distribution information to further constrain the gravity model, the three-dimensional methodology suggested by Plouff (1976) was not attempted. Inasmuch as the associated publication by Plouff (1975), which released the gravity data, is difficult to obtain and not in digital format, that report is reproduced in Appendix 2. Two figures of the publication are appended to the back of the text. A later formula for the theoretical value of gravity for the given latitudes at sea level (International Association of Geodesy, 1971) should be used to re-compute gravity anomalies. To merge t

Open-File Report↗
USGS2007

Miocene-Pliocene ice-volcano interactions at monogenetic volcanoes near Hobbs Coast, Marie Byrd Land, Antarctica

Paleoenvironmental reconstructions and 40 Ar/ 39 Ar geochronology of seven eroded monogenetic volcanoes near the Hobbs Coast, Marie Byrd Land, West Antarctica provide proxy records of WAIS paleo-ice-levels in Miocene-Pliocene times. Interpretations, based on lithofacies analysis, indicate whether the volcanoes erupted below, near, or above the level of the ice sheet. Our interpretations differ significantly from previous interpretations as they highlight the abundant evidence for ice-volcano interactions at emergent paleoenvironments but limited evidence of higher-than-present syn-eruptive ice-levels. Evidence for subglacial volcanic paleoenvironments is limited to Kennel Peak, a ~8 Ma volcano where a pillow lava sequence extending 25 m above current ice level overlies an inferred glacial till and unconformity. A major complication in the Hobbs Coast region is that the volcanism occurred on interfluves between regions of fast-flowing ice. Such a setting precludes establishing precise regional paleo-ice-levels although the presence or absence of ice at times of eruptions can be inferred.

Open-File Report↗
USGS2007

Mercury at the Oat Hill Extension Mine and James Creek, Napa County, California: Tailings, sediment, water, and biota, 2003-2004

The Oat Hill Extension (OHE) Mine is one of several mercury mines located in the James Creek/Pope Creek watershed that produced mercury from the 1870's until 1944 (U.S. Bureau of Mines, 1965). The OHE Mine developed veins and mineralized fault zones hosted in sandstone that extended eastward from the Oat Hill Mine. Waste material from the Oat Hill Mine was reprocessed at the OHE Mine using gravity separation methods to obtain cinnabar concentrates that were processed in a retort. The U.S. Bureau of Land Management requested that the U.S. Geological Survey measure and characterize mercury and other chemical constituents that are potentially relevant to ecological impairment of biota in tailings, sediment, and water at the OHE Mine and in the tributaries of James Creek that drain the mine area (termed Drainage A and B ) (Figs. 1 and 2). This report summarizes such data obtained from sampling of tailings and sediments at the OHE on October 17, 2003; water, sediment, and biota from James Creek on May 20, 2004; and biota on October 29, 2004. These data are interpreted to provide a preliminary assessment of the potential ecological impact of the mine on the James Creek watershed. The mine tailings are unusual in that they have not been roasted and contain relatively high concentrations of mercury (400 to 1200 ppm) compared to unroasted waste rock at other mines. These tailings have contaminated a tributary to James Creek with mercury primarily by erosion, on the basis of higher concentration of mercury (780 ng/L) measured in unfiltered (total mercury, Hg T ) spring water flowing from the OHE to James Creek compared to 5 to 14 ng/L Hg T measured in James Creek itself. Tailing piles (presumably from past Oat Hill mine dumping) near the USBLM property boundary and upstream of the main OHE mine drainage channel ( Drainage A ; Fig. 2) also likely emit mercury, on the basis of their mercury composition (930 to 1200 ppm). The OHE spring water is likely an appreciable source of sulfate and carbonate to James Creek, because the spring water was enriched in sulfate (130 mg/L) and carbonate (430 mg/L as CaCO 3 ) compared to James Creek water (70 to 100 mg/L SO 4 2- and 110 to 170 mg/L as CaCO 3 ) at the time of sampling. Concentrations of mercury in active channel sediment from James Creek are variable and potentially high, on the basis of chemical analysis (2.5 to 17 _g/g-wet sediment) and easily visible cinnabar grains in panned concentrates. Average (geometric mean) organic mercury (presumably monomethyl mercury (MMHg); §2.3.3) concentrations in several invertebrate taxa collected from the James Creek watershed locations were higher than invertebrates taken from a Northern California location lacking a known point source of mercury. The mean proportion of MMHg to total mercury in James Creek predatory insect samples was 40 percent (1 standard deviation = 30 percent); only 40 percent of all insect samples had a MMHg/Hg T proportion greater than 0.5. The low proportions of MMHg measured in invertebrates in James Creek and the presence of cinnabar in the creek suggest that some invertebrates may have anomolously high Hg concentrations as a result of the injestion or adhesion of extremely fine-grained cinnabar particles. Interpretation of Hg T in frogs and fish as an indicator of mercury reactivity, biouptake, or trophic transfer is limited, pending MMHg measuremens, by the possibility of these whole-body samples having contained cinnabar particles at the time of analysis. To minimize this limitation, the gastrointestinal tracts and external surfaces of all amphibians, where cinnabar most likely resides, were carefully flushed to remove any visible particles. However, extremely fine-grained, invisible, adhesive cinnabar particles likely exist in the amphibians' habitats. Hg T in foothill yellow-legged frogs collected from the James Creek study area, ranging from 0.1 to 0.6 μg/g Hg, was on average twice that of an extensive database compiled from Hg T in frogs studied throughout Northern California. Average concentrations of Hg T in frogs from James Creek were similar upstream (0.18 μg/g) and downstream (0.15 μg/g) of the confluence with Tributary 1 and at the lower Corona Mine adit drainage (0.14 μg/g). Frogs may be susceptible to trophic transfer of MMHg from invertebrates, but further study is required to rule out cinnabar ‘contamination.’ Hg T concentrations in rainbow trout collected from James Creek upstream and downstream of Tributary 1 averaged 0.10 μg/g and 0.13 μg/g, respectively. Compared to invertebrates, trout Hg T was less variable, suggesting that trout were less contaminated with cinnabar. California roach had significantly higher Hg T on average than trout (0.16 vs. 0.12 μg/g), and can be considered moderately contaminated compared to the same species from other sites in Northern California, which average 0.12 μg/g Hg. While limited measurements of mercury in water, sediment, and fish exceed, in some samples, predefined ecologically protective criteria for mine-impacted California systems, they do not clearly demonstrate that the biota residing in James Creek in the vicinity of the OHE are ecologically impaired. The potential for ecological impairment is clearly evident from invertebrate methyl mercury results and may manifest in other biological ecosystem residents that have yet to be studied (e.g., piscivorous birds). Methyl mercury concentrations in flowing water and sediment from James Creek and the tributary that drains the OHE are relatively low, ranging from 0.04 to 0.08 ng/L, although these data should be cautiously interpreted (see §3.2). While the results of this investigation suggest that the OHE contributes inorganic mercury to James Creek, they do not indicate the extent to which the OHE site is ecologically impairing biota relative to other sources of mercury. Improved sampling and analytical methods are recommended for future study.

California↗
USGS2007

The geology of Six Mile Reef, eastern Long Island Sound

Digital terrain models, which can be produced from multibeam bathymetric data, are ordered arrays of depths for a number of sea-floor positions sampled at regularly spaced intervals. These models provide valuable base maps for marine geological interpretations that help define the variability of the sea floor (one of the primary controls of benthic habitat diversity), improve our understanding of the processes that control the distribution and transport of bottom sediments and the distribution of benthic habitats, and provide a detailed framework to guide and assist future research, monitoring, and management activities. The bathymetry interpreted herein was processed from data collected by National Oceanic and Atmospheric Administration vessels during hydrographic surveys H11361 and H11252. These surveys mapped roughly 156 km² of sea floor in the vicinity of Six Mile Reef, an area of eastern Long Island Sound where the sea floor is characterized by fields of large sand waves and an east-west decreasing gradient of bottom tidal-current speeds (fig. 1). Interpretations of the bathymetry are supplemented by concurrently collected seismic reflection data, as well as archived historic seismic profiles, sediment samples and bottom photography collected as part of a long-standing geologic mapping partnership between the State of Connecticut and the U.S. Geological Survey (fig. 2). The purpose of this digital report is 1) to provide the acoustic data layers produced during the above mentioned surveys, 2) to use them to describe the sea-floor character and bedform morphologies near Six Mile Reef, and 3) to relate these descriptions to ongoing processes and sedimentary environments.

Connecticut, New York↗
USGS2008

Enhanced sidescan-sonar imagery, north-central Long Island Sound

The U.S. Geological Survey, National Oceanic and Atmospheric Administration (NOAA), and Connecticut Department of Environmental Protection have been working cooperatively to map the sea-floor geology within Long Island Sound. Sidescan-sonar imagery collected during three NOAA hydrographic surveys (H11043, H11044, and H11045) was used to interpret the surficial-sediment distribution and sedimentary environments within the Sound. The original sidescan-sonar imagery generated by NOAA was used to evaluate hazards to navigation, which does not require consistent tonal matching throughout the survey. In order to fully utilize these data for geologic interpretation, artifacts within the imagery, primarily due to sidescan-system settings (for example, gain changes), processing techniques (for example, lack of across-track normalization) and environmental noise (for example, sea state), need to be minimized. Sidescan-sonar imagery from surveys H11043, H11044, and H11045 in north-central Long Island Sound was enhanced by matching the grayscale tones between adjacent sidescan-sonar lines to decrease the patchwork effect caused by numerous artifacts and to provide a more coherent sidescan-sonar image for use in geologic interpretation.

New York, Connecticut↗
USGS2009

Land-cover change in the central irregular plains, 1973-2000

Spearheaded by the Geographic Analysis and Monitoring Program of the U.S. Geological Survey (USGS) in collaboration with the U.S. Environmental Protection Agency (EPA) and the National Aeronautics and Space Administration (NASA), the Land Cover Trends is a research project focused on understanding the rates, trends, causes, and consequences of contemporary United States land-use and land-cover change. Using the EPA Level III ecoregions as the geographic framework, scientists process geospatial data collected between 1973 and 2000 to characterize ecosystem responses to land-use changes. The 27-year study period was divided into five temporal periods: 1973-1980, 1980-1986, 1986-1992, 1992-2000 and 1973-2000. General land-cover classes for these periods were interpreted from Landsat Multispectral Scanner, Thematic Mapper, and Enhanced Thematic Mapper Plus imagery to categorize land-cover change and evaluate using a modified Anderson Land Use Land Cover Classification System for image interpretation. The rates of land-cover change are estimated using a stratified, random sampling of 10-kilometer (km) by 10-km blocks allocated within each ecoregion. For each sample block, satellite images are used to interpret land-cover change. Additionally, historical aerial photographs from similar timeframes and other ancillary data such as census statistics and published literature are used. The sample block data are then incorporated into statistical analyses to generate an overall change matrix for the ecoregion. These change statistics are applicable for different levels of scale, including total change for the individual sample blocks and change estimates for the entire ecoregion. The results illustrate that there is no single profile of land-cover change but instead point to geographic variability that results from land uses within ecoregions continuously adapting to various factors including environmental, technological, and socioeconomic.

Open-File Report↗
USGS2009

Land-cover change in the Lower Mississippi Valley, 1973-2000

The Land Cover Trends is a research project focused on understanding the rates, trends, causes, and consequences of contemporary United States land-use and land-cover change. The project is coordinated by the Geographic Analysis and Monitoring Program of the U.S. Geological Survey (USGS) in conjunction with the U.S. Environmental Protection Agency (EPA) and the National Aeronautics and Space Administration (NASA). Using the EPA Level III ecoregions as the geographic framework, scientists process geospatial data collected between 1973 and 2000 were processed to characterize ecosystem responses to land-use changes. The 27-year study period was divided into four temporal periods: 1973 to1980, 1980 to 1986, 1986 to 1992, 1992 to 2000 and overall from 1973 to 2000. General land-cover classes for these periods were interpreted from Landsat Multispectral Scanner, Thematic Mapper, and Enhanced Thematic Mapper Plus imagery to categorize and evaluate land-cover change using a modified Anderson Land Use Land Cover Classification System (Anderson and others, 1976) for image interpretation. The rates of land-cover change were estimated using a stratified, random sampling of 10-kilometer (km) by 10-km blocks allocated within each ecoregion. For each sample block, satellite images were used to interpret land-cover change. The sample block data then were incorporated into statistical analyses to generate an overall change matrix for the ecoregion. These change statistics are applicable for different levels of scale, including total change for the individual sample blocks and change estimates for the entire ecoregion.

Open-File Report↗
USGS2009

Land Cover Change in the Boston Mountains, 1973-2000

The U.S. Geological Survey (USGS) Land Cover Trends project is focused on understanding the rates, trends, causes, and consequences of contemporary U.S. land-cover change. The objectives of the study are to: (1) to develop a comprehensive methodology for using sampling and change analysis techniques and Landsat Multispectral Scanner (MSS), Thematic Mapper (TM), and Enhanced Thematic Mapper Plus (ETM+) data to measure regional land-cover change across the United States; (2) to characterize the types, rates, and temporal variability of change for a 30-year period; (3) to document regional driving forces and consequences of change; and (4) to prepare a national synthesis of land-cover change (Loveland and others, 1999). The 1999 Environmental Protection Agency (EPA) Level III ecoregions derived from Omernik (1987) provide the geographic framework for the geospatial data collected between 1973 and 2000. The 27-year study period was divided into five temporal periods: 1973-1980, 1980-1986, 1986-1992, 1992-2000, and 1973-2000, and the data are evaluated using a modified Anderson Land Use Land Cover Classification System (Anderson and others, 1976) for image interpretation. The rates of land-cover change are estimated using a stratified, random sampling of 10-kilometer (km) by 10-km blocks allocated within each ecoregion. For each sample block, satellite images are used to interpret land-cover change for the five time periods previously mentioned. Additionally, historic aerial photographs from similar time frames and other ancillary data, such as census statistics and published literature, are used. The sample block data are then incorporated into statistical analyses to generate an overall change matrix for the ecoregion. Field data of the sample blocks include direct measurements of land cover, particularly ground-survey data collected for training and validation of image classifications (Loveland and others, 2002). The field experience allows for additional observations of the character and condition of the landscape, assistance in sample block interpretation, ground truthing of Landsat imagery, and determination of the driving forces of change identified in an ecoregion.

Open-File Report↗
USGS2014

Seismicity of the Earth 1900-2012 Java and vicinity

The Sunda convergent margin extends for 5,600 km from the Bay of Bengal and the Andaman Sea, both located northwest of the map area, towards the island of Sumba in the southeast, and then continues eastward as the Banda arc system. This tectonically active margin is a result of the India and Australia plates converging with and subducting beneath the Sunda plate at a rate of approximately 50 to 70 mm/yr. The main physiographic feature associated with this convergent margin is the Sunda-Java Trench, which stretches for 3,000 km parallel to the Java and Sumatra land masses and terminates at 120° E. The convergence of the Indo-Australia and Sunda plates produces two active volcanic arcs: Sunda, which extends from 105 to 122° E and Banda, which extends from 122 to 128° E. The Sunda arc results solely from relatively simple oceanic plate subduction, while the Banda arc represents the transition from oceanic subduction to continental collision, where a complex, broad deforming zone is found. Based on modern activity, the Banda arc can be divided into three distinct zones: an inactive section, the Wetar Zone, bound by two active segments, the Flores Zone in the west and the Damar Zone in the east. The lack of volcanism in the Wetar Zone is attributed to the collision of Australia with the Sunda plate. The absence of gap in volcanic activity is underlain by a gap in intermediate depth seismicity, which is in contrast to nearly continuous, deep seismicity below all three sections of the arc. The Flores Zone is characterized by down-dip compression in the subducted slab at intermediate depths and late Quaternary uplift of the forearc. These unusual features, along with GPS data interpretations indicate that the Flores Zone marks the transition between subduction of oceanic crust in the west and the collision of continental crust in the east. The Java section of the Sunda arc is considered relatively aseismic historically when compared to the highly seismically active Sumatra section, despite both areas being located along the same active subduction margin. Shallow (0–20 km) events have occurred historically in the overlying Sunda plate, causing damage to local and regional communities. A recent example was the May 26, 2006 M6.3 left-lateral strike-slip event that occurred at a depth of 10 km in central Java, and caused over 5,700 fatalities. Intermediate depth (70–300 km) earthquakes frequently occur beneath Java as a result of intraplate faulting within the Australia slab. Deep (300–650 km) earthquakes occur beneath the Java Sea and the back-arc region to the north of Java. Similar to other intermediate depth events, these earthquakes are also associated with intraslab faulting. However, this subduction zone exhibits a gap in seismicity from 250 to 400 km, interpreted as the transition between extensional and compressional slab stresses. Historical examples of large intraplate events include: the 1903 M8.1 event, 1921 M7.5 event, 1977 M8.3 event, and August 2007 M7.5 event. Large thrust earthquakes close to the Java trench are typically interplate faulting events along the slab interface between the Australia and Sunda plates. These earthquakes also generally have high tsunamigenic potential due to their shallow hypocentral depths. In some cases, these events have demonstrated slow moment-release and have been defined as ‘tsunami’ earthquakes, where rupture is large in the weak crustal layers very close to the seafloor. These events are categorized by tsunamis that are significantly larger than predicted by the earthquake’s magnitude. The most notable tsunami earthquakes in the Java region occurred on June 2, 1994 (M7.8) and July 17, 2006 (M7.7). The 1994 event produced a tsunami with wave runup heights of 13 m, killing over 200 people. The 2006 event produced a tsunami of up to 15 m, and killed 730 people. Although both of these tsunami earthquakes were characterized by rupture along thrust faults, they were followed by an abundance of normal faulting aftershocks. These aftershocks are interpreted to result from extension within the subducting Australia plate, whereas the mainshocks represented interplate faulting between the Australia and Sunda plates.

Open-File Report↗
USGS2011

Combined multibeam and LIDAR bathymetry data from eastern Long Island Sound and westernmost Block Island Sound-A regional perspective

Detailed bathymetric maps of the sea floor in Long Island Sound are of great interest to the Connecticut and New York research and management communities because of this estuary's ecological, recreational, and commercial importance. The completed, geologically interpreted digital terrain models (DTMs), ranging in area from 12 to 293 square kilometers, provide important benthic environmental information, yet many applications require a geographically broader perspective. For example, individual surveys are of limited use for the planning and construction of cross-sound infrastructure, such as cables and pipelines, or for the testing of regional circulation models. To address this need, we integrated 12 multibeam and 2 LIDAR (Light Detection and Ranging) contiguous bathymetric DTMs, produced by the National Oceanic and Atmospheric Administration during charting operations, into one dataset that covers much of eastern Long Island Sound and extends into westernmost Block Island Sound. The new dataset is adjusted to mean lower low water, is gridded to 4-meter resolution, and is provided in UTM Zone 18 NAD83 and geographic WGS84 projections. This resolution is adequate for sea floor-feature and process interpretation but is small enough to be queried and manipulated with standard Geographic Information System programs and to allow for future growth. Natural features visible in the grid include exposed bedrock outcrops, boulder lag deposits of submerged moraines, sand-wave fields, and scour depressions that reflect the strength of the oscillating and asymmetric tidal currents. Bedform asymmetry allows interpretations of net sediment transport. Anthropogenic artifacts visible in the bathymetric data include a dredged channel, shipwrecks, dredge spoils, mooring anchors, prop-scour depressions, buried cables, and bridge footings. Together the merged data reveal a larger, more continuous perspective of bathymetric topography than previously available, providing a fundamental framework for research and resource management activities in this major east-coast estuary.

Open-File Report↗
USGS2011

Results of time-domain electromagnetic soundings in Miami-Dade and southern Broward Counties, Florida

Time-domain electromagnetic (TEM) soundings were made in Miami-Dade and southern Broward Counties to aid in mapping the landward extent of saltwater in the Biscayne aquifer. A total of 79 soundings were collected in settings ranging from urban to undeveloped land, with some of the former posing problems of land access and interference from anthropogenic features. TEM soundings combined with monitoring-well data were used to determine if the saltwater front had moved since the last time it was mapped, to provide additional spatial coverage where existing monitoring wells were insufficient, and to help interpret a previously collected helicopter electromagnetic (HEM) survey flown in the southernmost portion of the study area. TEM soundings were interpreted as layered resistivity-depth models. Using information from well logs and water-quality data, the resistivity of the freshwater saturated Biscayne aquifer is expected to be above 30 ohm-meters, and the saltwater-saturated aquifer will have resistivities of less than 10 ohm-meters allowing determination of water quality from the TEM interpretations. TEM models from 29 soundings were compared to electromagnetic induction logs collected in nearby monitoring wells. In general, the agreement of these results was very good, giving confidence in the use of the TEM data for mapping saltwater encroachment.

Florida↗
USGS2013

Principal facts and an approach to collecting gravity data using near-real-time observations in the vicinity of Barstow, California

A gravity survey was done in the vicinity of Barstow, California, in which data were processed and analyzed in the field. The purpose of the data collection was to investigate possible changes in gravity across mapped Quaternary faults and to improve regional gravity coverage, adding to the existing national gravity database. Data were collected, processed, analyzed, and interpreted in the field in order to make decisions about where to collect data for the remainder of the survey. Geological targets in the Barstow area included the Cady Fault, the Manix Fault, and the Yermo Hills. Upon interpreting initial results, additional data were collected to more completely define the fault targets, rather than collecting data to improve the regional gravity coverage in an adjacent area. Both the Manix and Cady Faults showed gravitational expression of the subsurface in the form of steep gravitational gradients that we interpret to represent down-dropped blocks. The gravitational expression of the Cady Fault is on trend with the linear projection of the mapped fault, and the gravitational expression of the Manix Fault is north of the current northernmost mapped strand of the fault. The relative gravitational low over the Yermo Hills was confirmed and better constrained, indicating a significant thickness of sediments at the junction of the Calico, Manix, and Tin Can Alley Faults.

California↗