Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Stages”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63Linked to original sources
USGS2017

Effects of native herbs and light on garlic mustard ( Alliaria petiolata ) invasion

The degree to which invasive species drive or respond to environmental change has important implications for conservation and invasion management. Often characterized as a driver of change in North American woodlands, the invasive herb garlic mustard may instead respond to declines in native plant cover and diversity. We tested effects of native herb cover, richness, and light availability on garlic mustard invasion in a Minnesota oak woodland. We planted 50 garlic mustard seeds into plots previously planted with 0 to 10 native herb species. We measured garlic mustard seedling establishment, survival to rosette and adult stages, and average (per plant) and total (per plot) biomass and silique production. With the use of structural equation models, we analyzed direct, indirect, and net effects of native cover, richness, and light on successive garlic mustard life stages. Native plant cover had a significant negative effect on all life stages. Species richness had a significant positive effect on native cover, resulting in indirect negative effects on all garlic mustard stages, and net negative effects on adult numbers, total biomass, and silique production. Light had a strong negative effect on garlic mustard seedling establishment and a positive effect on native herb cover, resulting in significant negative net effects on garlic mustard rosette and adult numbers. However, light's net effect on total garlic mustard biomass and silique production was positive; reproductive output was high even in low-light/high-cover conditions. Combined effects of cover, richness, and light suggest that native herbs provide biotic resistance to invasion by responding to increased light availability and suppressing garlic mustard responses, although this resistance may be overwhelmed by high propagule pressure. Garlic mustard invasion may occur, in part, in response to native plant decline. Restoring native herbs and controlling garlic mustard seed production may effectively reduce garlic mustard spread and restore woodland diversity.

Invasive Plant Science and Management↗
USGS2020

Lesser prairie-chicken (Tympanuchus pallidicinctus) use of man-made water sources

The lesser prairie-chicken ( Tympanuchus pallidicinctus ) occurs in the semiarid southern Great Plains, a region prone to periods of drought. Researchers generally believe that lesser prairie-chickens are able to satisfy their water requirements through preformed water and metabolic processes, but also know that they experience low survival and reproductive success during periods of drought. We used motion-sensing cameras to assess lesser prairie-chicken visits to man-made free water sources over a 48-month period from March 2009 to February 2013 in west Texas. Our objective was to examine temporal patterns of water use by lesser prairie-chickens, and to explore life history phenology and environmental conditions that may influence the species' use of free water. We documented 1,439 visits to water sources by lesser prairie-chickens. Their use of water sources was high during the winter months (December–February; 92 visits per 100 trap days) but the highest average visit rate to water sources occurred during the lekking-nesting life stage (March–May; 146 visits per 100 trap days). Water use was lower during the brood-rearing stage (June–August; 71 visits per 100 trap days) and lowest during the brood dispersal and independence stage (September–November; 19 visits per 100 trap days). Water use was strongly associated with dew point (P < 0.0001) and temperature (P = 0.0002) but was not associated with precipitation (P = 0.1037). These data indicate life-cycle stage (e.g., lekking-nesting) and reduced availability of preformed water may influence use of free water sources by lesser prairie-chickens. Current climate models predict the region of the study area will experience increases in temperature and decreases in frequency of precipitation. The combined effect of this would be reduced environmental moisture. If the prediction of increasing aridity in the region holds true, man-made water sources may become a tool for conservation of the species.

Texas↗
USGS2004

Re-Os sulfide geochronology of the Red Dog sediment-hosted Zn-Pb-Ag deposit, Brooks Range, Alaska

The Red Dog sediment-hosted deposit in the De Long Mountains of northern Alaska is the largest Zn producer in the world. Main stage mineralization is characterized by massive sulfide ore and crosscutting subvertical veins. Although the vein mineralization is clearly younger than the massive ore, the exact temporal relationship between the two is unclear. Re-Os geochronology of pyrite is used to determine the absolute age of main stage ore at Red Dog. A 10-point isochron on both massive and vein pyrite yields an age of 338.3 ?? 5.8 Ma and is interpreted to represent the age of main stage ore. The Re-Os data indicate that both massive and vein ore types are coeval within the resolution of the technique. Formation of the Red Dog deposit was associated with extension along a passive continental margin, and therefore the Re-Os age of main stage ore constrains the timing of rifting as well as the age of the host sedimentary rocks. Sphalerite from both massive and vein ore yields imprecise ages and shows a high degree of scatter compared to pyrite. We suggest that the Re-Os systematics of sphalerite can be disturbed and that this mineral is not reliable for Re-Os geochronology. ?? 2004 by Economic Geology.

Economic Geology↗
USGS2010

Geochemical evolution of a high arsenic, alkaline pit-lake in the Mother Lode Gold District, California

The Harvard orebody at the Jamestown gold mine, located along the Melones fault zone in the southern Mother Lode gold district, California, was mined in an open-pit operation from 1987 to 1994. Dewatering during mining produced a hydrologic cone of depression; recovery toward the premining ground-water configuration produced a monomictic pit lake with alkaline Ca-Mg-HCO 3 -SO 4 –type pit water, concentrations of As up to 1,200 μ g/L, and total dissolved solids (TDS) up to 2,000 mg/L. In this study, pit-wall rocks were mapped and chemically analyzed to provide a context for evaluating observed variability in the composition of the pit-lake waters in relationship to seasonal weather patterns. An integrated hydrogeochemical model of pit-lake evolution based on observations of pit-lake volume, water composition (samples collected between 1998–2000, 2004), and processes occurring on pit walls was developed in three stages using the computer code PHREEQC. Stage 1 takes account of seasonally variable water fluxes from precipitation, evaporation, springs, and ground water, as well as lake stratification and mixing processes. Stage 2 adds CO 2 fluxes and wall-rock interactions, and stage 3 assesses the predictive capability of the model. Two major geologic units in fault contact comprise the pit walls. The hanging wall is composed of interlayered slate, metavolcanic and metavolcaniclastic rocks, and schists; the footwall rocks are chlorite-actinolite and talc-tremolite schists generated by metasomatism of greenschist-facies mafic and ultramafic igneous rocks. Alteration in the ore zone provides evidence for mineralizing fluids that introduced CO 2 , S, and K 2 O, and redistributed SiO 2 . Arsenian pyrite associated with the alteration weathers to produce goethite and jarosite on pit walls and in joints, as well as copiapite and hexahydrite efflorescences that accumulate on wall-rock faces during dry California summers. All of these pyrite weathering products incorporate arsenic at concentrations from <100 up to 1,200 ppm. In the pit lake, pH and TDS reach seasonal highs in the summer epilimnion; pH is lowest in the summer hypolimnion. Arsenic and bicarbonate covary in the hypolimnion, rising as stratification proceeds and declining during winter rains. The computational model suggests that water fluxes alone do not account for this seasonal variability. Loss of CO 2 to the atmosphere, interaction with pit walls including washoff of efflorescent salts during the first flush and seasonal rainfall, and arsenic sorption appear to contribute to the observed pit-lake characteristics.

California↗
USGS1936

The Battle Branch gold mine, Auraria, Georgia

The Battle Branch mine, in north-central Georgia, is well known locally for its pockets of exceptionally rich gold ore. During the period from May 24, 1934, to May 20, 1935, 781.97 ounces of bullion, of an average fineness of about 850, was shipped to the mint. The deposit is of the lode type; it consists of many quartz stringers and lenses grouped in three zones in a schistose phase of the Carolina gneiss. Three stages of mineralization are recognized. An early high-temperature stage produced coarsely crystalline silicates, such as garnet, kyanite, tourmaline, biotite, and muscovite, which were probably formed by a recrystallization of the minerals in the country rock. During the intermediate stage ankerite, quartz, and pyrrhotite were formed. The last stage was marked by chlorite, galena, and gold. Throughout the period of mineralization minor amounts of movement in and across the lode occurred. The distribution of the ore shoots is dependent to a large extent upon the distribution of the cross fractures. The ore shoots are pod-shaped bodies, which pinch and swell abruptly. The gold in the rich shoots is contemporaneous with galena and is clearly of hypogene origin.

Georgia↗
USGS1936

Hydrothermal leaching in the Virginia mining district, New Mexico

The tourmaline-copper deposits of the Virginia mining district, New Mexico, lie along veins that were plugged and reopened repeatedly during the process of mineral deposition. At some time between the second and third stages of deposition the solutions removed calcite, sericite, and chlorite from interstitial and included fragments of altered wall-rock in the veins and thereby produced honeycombed box-works of first- and second-stage minerals, chiefly specularite, quartz, and chalcopyrite, on the walls of which minerals of later stages were deposited. It is suggested that the leaching solutions may have been acid and that the leaching was done by the fresh solutions of the third stage before their acidity was neutralized through reactions along their channelways. A mechanism is suggested to account for their presence at places previously traversed by alkaline or neutral solutions.

New Mexico↗
USGS1961

Sulfide ores formed from sulfide-deficient solutions 1

Assuming that many hydrothermal ore deposits are formed from emanations given off from a magma at depth while it cools through the interval in which latent heat of crystallization is generated, it is shown that this cooling interval for magmatic bodies of moderate size must be measured in tens or hundreds of thousands of years. Emanations from such a magma should change at the source with time: relatively insoluble volatiles should depart early and the more soluble ones late; the general order is probably sulfur gases and oxides of carbon, water, chlorides, and fluorides. Experimental and field evidence indicates that this order approximates the increasing solubility of these gases in natural magmas. Theoretical considerations show that within a hydrothermal conduit a relatively small gradient would soon be established between the magma and the surface. A small gradient suggests that temperature drop is a minor factor in precipitating substances in solution , whereas a drop in pressure and reaction with wall rocks or with material precipitated from earlier emanations would be of major importance. The sulfur-rich early emanations tend to react with indigenous iron of the country rock, or with iron carried by carbon dioxide-rich solutions to where a marked pressure drop occurs; either of these reactions will form abundant early iron sulfide . Later sulfur-deficient emanations, which then carry soluble halides of ore metals, react with this early iron sulfide to precipitate the ore mineral sulfides by replacement and deposition with loss of iron to the solution . Precipitation of much sulfide ore is thus commonly accomplished by sulfur that was fixed near the site of the ore body by earlier emanations from the magmatic source; a large amount of ore , however, may be precipitated from late-stage magmatic solutions where they mingle with early-stage sulfur-bearing solutions from a different magmatic source.

Economic Geology↗
USGS1992

Organic matter diagenesis as the key to a unifying theory for the genesis of tabular uranium-vanadium deposits in the Morrison Formation, Colorado Plateau

Interstitial, epigenetic amorphous organic matter is intimately associated with uranium in the Grants uranium region on the southern part of the Colorado Plateau in northwestern New Mexico and is considered essential to genetic models for these deposits. In contrast, uranium minerals are intimately associated with authigenic vanadium chlorite and vanadium oxides in amorphous organic matter-poor ores of the Slick Rock and Henry Mountains mining districts on the northern part of the plateau, and therefore, in some genetic models amorphous organic matter is not considered crucial to the formation of these deposits. Differences in organic matter content can be explained by recognizing that amorphous organic matter-poor deposits have been subjected to more advanced stages of diagenesis than amorphous organic matter-rich deposits, during which organic compounds were broken down, solubilized, and removed during various diagenetic stages (e.g., sulfate reduction, methanogenesis, and organic acid production). Most diagenetic alterations (e.g., dissolution of framework grains and cements and precipitation of coarse-grained coffinite, vanadium clays, and vanadium oxides) characteristic of amorphous organic matter-poor deposits occurred when temperatures exceeded 80 degrees C--a temperature typical of the organic acid stage of diagenesis.Two factors combined to assure that a high percentage of the amorphous organic matter was removed from the Morrison Formation during diagenesis: the fact that the organic matter was humic (and therefore highly oxygenated), and that the juxtaposition of authigenic smectite and amorphous organic matter on grain rims facilitated clay mineral-organic catalysis reactions leading to the breakdown of large organic molecules into smaller, soluble molecules.Evidence that amorphous organic matter was involved in the genesis of organic matter-poor, as well as organic matter-rich, deposits includes the presence of leached iron-titanium oxides and strongly etched garnets (both attributed to leaching by organic acids), the gradation from organic matter-rich to organic matter-poor deposits in the Grants uranium region, the inverse correlation between the amount of amorphous organic matter and the intensity of diagenetic alteration, the ubiquitous occurrence of amorphous organic matter inclusions in coffinite, and the similarity in geometry of tabular uranium-vanadium ores and Holocene humate deposits. By recognizing that amorphous organic matter was crucial to the initial concentration of uranium (even in those deposits that presently contain little amorphous organic matter) and by recognizing the effects of the various stages of diagenesis on the ore, one genetic model may be applied to all of the sandstone-hosted, tabular-type uranium-vanadium deposits in the Morrison Formation on the Colorado Plateau.

Economic Geology↗
USGS2002

Genesis of the Doğankuzu and Mortaş Bauxite deposits, Taurides, Turkey: separation of Al, Fe, and Mn and implications for passive margin metallogeny

The Taurides region of Turkey is host to a number of important bauxite, Al-rich laterite, and Mn deposits. The most important bauxite deposits, Doğankuzu and Mortaş, are karst-related, unconformity-type deposits in Upper Cretaceous limestone. The bottom contact of the bauxite ore is undulatory, and bauxite fills depressions and sinkholes in the footwall limestone, whereas its top surface is concordant with the hanging-wall limestone. The thickness of the bauxite varies from 1 to 40 m and consists of böhmite, hematite, pyrite, marcasite, anatase, diaspore, gypsum, kaolinite, and smectite. The strata-bound, sulfide- and sulfate-bearing, low-grade lower part of the bauxite ore bed contains pyrite pseudomorphs after hematite and is deep red in outcrop owing to supergene oxidation. The lower part of the bauxite body contains local intercalations of calcareous conglomerate that formed in fault-controlled depressions and sinkholes. Bauxite ore is overlain by fine-grained Fe sulfide-bearing and calcareous claystone and argillaceous limestone, which are in turn overlain by massive, compact limestone of Santonian age. That 50-m-thick limestone is in turn overlain by well-bedded bioclastic limestone of Campanian or Maastrichtian age, rich with rudist fossils. Fracture fillings in the bauxite orebody are up to 1 m thick and consist of bluish-gray-green pyrite and marcasite (20%) with böhmite, diaspore, and anatase. These sulfide veins crosscut and offset the strata-bound sulfide zones. Sulfur for the sulfides was derived from the bacterial reduction of seawater sulfate, and Fe was derived from alteration of oxides in the bauxite. Iron sulfides do not occur within either the immediately underlying or overlying limestone. The platform limestone and shale that host the bauxite deposits formed at a passive margin of the Tethys Ocean. Extensive vegetation developed on land as the result of a humid climate, thereby creating thick and acidic soils and enhancing the transport of large amounts of organic matter to the ocean. Alteration of the organic matter provided CO 2 that contributed to formation of a relatively 12 C-rich marine footwall limestone. Relative sea-level fall resulted from strike-slip faulting associated with closure of the ocean and local uplift of the passive margin. That uplift resulted in karstification and bauxite formation in topographic lows, as represented by the Doğankuzu and Mortaş deposits. During stage 1 of bauxite formation, Al, Fe, Mn, and Ti were mobilized from deeply weathered aluminosilicate parent rock under acidic conditions and accumulated as hydroxides at the limestone surface owing to an increase in pH. During stage 2, Al, Fe, and Ti oxides and clays from the incipient bauxite (bauxitic soil) were transported as detrital phases and accumulated in the fault-controlled depressions and sinkholes. During stage 3, the bauxitic material was concentrated by repeated desilicification, which resulted in the transport of Si and Mn to the ocean through a well-developed karst drainage system. The transported Mn was deposited in offshore muds as Mn carbonates. The sulfides also formed in stage 3 during early diagenesis. Transgression into the foreland basin resulted from shortening of the ocean basin and nappe emplacement during the latest Cretaceous. During that time bioclastic limestone was deposited on the nappe ramp, which overlapped bauxite accumulation.

Taurides Region↗
USGS2006

Intensity of quartz cathodoluminescence and trace-element content in quartz from the porphyry copper deposit at Butte, Montana

Textures of hydrothermal quartz revealed by cathodoluminescence using a scanning electron microscope (SEM-CL) reflect the physical and chemical environment of quartz formation. Variations in intensity of SEM-CL can be used to distinguish among quartz from superimposed mineralization events in a single vein. In this study, we present a technique to quantify the cathodoluminescent intensity of quartz within individual and among multiple samples to relate luminescence intensity to specific mineralizing events. This technique has been applied to plutonic quartz and three generations of hydrothermal veins at the porphyry copper deposit in Butte, Montana. Analyzed veins include early quartz-molybdenite veins with potassic alteration, pyrite-quartz veins with sericitic alteration, and Main Stage veins with intense sericitic alteration. CL intensity of quartz is diagnostic of each mineralizing event and can be used to fingerprint quartz and its fluid inclusions, isotopes, trace elements, etc., from specific mineralizing episodes. Furthermore, CL intensity increases proportional to temperature of quartz formation, such that plutonic quartz from the Butte quartz monzonite (BQM) that crystallized at temperatures near 750 ??C luminesces with the highest intensity, whereas quartz that precipitated at ???250 ??C in Main Stage veins luminesces with the least intensity. Trace-element analyses via electron microprobe and laser ablation-ICP-MS indicate that plutonic quartz and each generation of hydrothermal quartz from Butte is dominated by characteristic trace amounts of Al, P, Ti, and Fe. Thus, in addition to CL intensity, each generation of quartz can be distinguished based on its unique trace-element content. Aluminum is generally the most abundant element in all generations of quartz, typically between 50 and 200 ppm, but low-temperature, Main Stage quartz containing 400 to 3600 ppm Al is enriched by an order of magnitude relative to all other quartz generations. Phosphorous is present in abundances between 25 and 75 ppm, and P concentrations in quartz show little variation among quartz generations. Iron is the least abundant of these elements in most quartz types and is slightly enriched in CL-dark quartz in pyrite-quartz veins with sericitic alteration. Titanium is directly correlated with both temperature of quartz precipitation, and intensity of quartz luminescence, such that BQM quartz contains hundreds of ppm Ti, whereas Main Stage quartz contains less than 10 ppm Ti. Our results suggest that Ti concentration in quartz is controlled by temperature of quartz precipitation and that increased Ti concentrations in quartz may be responsible for increased CL intensities.

American Mineralogist↗
USGS2010

Epic Flooding in Georgia, 2009

Metropolitan Atlanta-September 2009 Floods The epic floods experienced in the Atlanta area in September 2009 were extremely rare. Eighteen streamgages in the Metropolitan Atlanta area had flood magnitudes much greater than the estimated 0.2-percent (500-year) annual exceedance probability. The Federal Emergency Management Agency (FEMA) reported that 23 counties in Georgia were declared disaster areas due to this flood and that 16,981 homes and 3,482 businesses were affected by floodwaters. Ten lives were lost in the flood. The total estimated damages exceed $193 million (H.E. Longenecker, Federal Emergency Management Agency, written commun., November 2009). On Sweetwater Creek near Austell, Ga., just north of Interstate 20, the peak stage was more than 6 feet higher than the estimated peak stage of the 0.2-percent (500-year) flood. Flood magnitudes in Cobb County on Sweetwater, Butler, and Powder Springs Creeks greatly exceeded the estimated 0.2-percent (500-year) floods for these streams. In Douglas County, the Dog River at Ga. Highway 5 near Fairplay had a peak stage nearly 20 feet higher than the estimated peak stage of the 0.2-percent (500-year) flood. On the Chattahoochee River, the U.S. Geological Survey (USGS) gage at Vinings reached the highest level recorded in the past 81 years. Gwinnett, De Kalb, Fulton, and Rockdale Counties also had record flooding. South Georgia March and April 2009 Floods The March and April 2009 floods in South Georgia were smaller in magnitude than the September floods but still caused significant damage. No lives were lost in this flood. Approximately $60 million in public infrastructure damage occurred to roads, culverts, bridges and a water treatment facility (Joseph T. McKinney, Federal Emergency Management Agency, written commun., July 2009). Flow at the Satilla River near Waycross, exceeded the 0.5-percent (200-year) flood. Flows at seven other stations in South Georgia exceeded the 1-percent (100-year) flood.

Fact Sheet↗
USGS2016

U.S. Geological Survey response to flooding in Texas, May–June 2015

As a Federal science agency within the Department of the Interior, the U.S. Geological Survey (USGS) collects and disseminates streamflow stage and discharge information along with other types of water information as a major part of its Water mission area. Data collected at USGS streamflow-gaging stations (hereinafter referred to as “streamgages”) are used for a variety of purposes including flood warning, engineering design, management of water resources, and scientific research. During flood events, the need for timely, accurate, and complete streamflow data is underscored because these data are relied on by local, State, and Federal emergency management personnel for flood response purposes. For example, the National Weather Service uses the data from USGS streamgages to develop flood forecasts for specific locations on a river. Tasks that the USGS performs in response to floods include monitoring the operation of gages and responding to any interruptions in data collection, calibrating and verifying stage-discharge ratings, and documenting extreme events including peak stage and peak discharge. Frequent, severe storms during May and June 2015 caused widespread flooding in Texas. By various measures, the storms that caused the flooding were extreme and persistent. May 2015 was the wettest month on record for Texas, with a statewide average precipitation of 9.06 inches. In comparison, the long-term statewide average monthly precipitation is 3.37 inches, with the previous record average monthly precipitation reported as 6.66 inches during June 2004. The Office of the Texas State Climatologist compiled monthly precipitation amounts for 19 selected cities throughout Texas and for 1 city in Louisiana; the total monthly precipitation amounts exceeded the monthly normal precipitation for 18 of the 19 selected cities in Texas, with 5 of these cities exceeding their previous record for the month of May. The onset of abundant precipitation in May 2015 resulted in the National Weather Service flood stage being exceeded at USGS streamgages on numerous rivers. The widespread and prolonged nature of the flooding was unusual; most flood events in Texas are localized, typically affecting only one or two river basins and generally lasting only a few days. With the exception of the Rio Grande, flooding was widespread in all of the major rivers in Texas during May–June 2015.

Texas↗
USGS2003

Flooding in Illinois, April-June 2002

Widespread flooding occurred throughout most of Illinois in spring 2002 as a result of multiple intense rainstorms that moved through the State during an extended 2-month period from the third week in April through the month of May in central and southern Illinois, the first week in June in northern Illinois, and the second week in June in west-central Illinois. The scale of flooding was highly variable in time and intensity throughout the State. A Federal disaster was declared for central and southern Illinois to deal with the extensive damage incurred during the severe weather, and to provide emergency aid relief. Discharge and stage records for the flood periods described above are presented for 193 streamflow-gaging stations throughout Illinois and in drainages just upstream of the State. New maximum instantaneous discharge was recorded at 12 stations during this flood period, and new maximum stage was recorded at 15 stations. Flood stage was exceeded for at least 1 day during this 2-month period at 67 of the 82 stations with established flood-stage elevations given by the National Weather Service. Of the 162 streamflowgaging stations with an established flood-frequency distribution, a 5-year or greater flood discharge was recorded at 87 stations, and a 100-year or greater flood discharge occurred at six stations.

Illinois↗
USGS2013

The Shoreline Management Tool—An ArcMap tool for analyzing water depth, inundated area, volume, and selected habitats, with an example for the lower Wood River Valley, Oregon

The Shoreline Management Tool is a geographic information system (GIS) based program developed to assist water- and land-resource managers in assessing the benefits and effects of changes in surface-water stage on water depth, inundated area, and water volume. Additionally, the Shoreline Management Tool can be used to identify aquatic or terrestrial habitat areas where conditions may be suitable for specific plants or animals as defined by user-specified criteria including water depth, land-surface slope, and land-surface aspect. The tool can also be used to delineate areas for use in determining a variety of hydrologic budget components such as surface-water storage, precipitation, runoff, or evapotranspiration. The Shoreline Management Tool consists of two parts, a graphical user interface for use with Esri™ ArcMap™ GIS software to interact with the user to define scenarios and map results, and a spreadsheet in Microsoft® Excel® developed to display tables and graphs of the results. The graphical user interface allows the user to define a scenario consisting of an inundation level (stage), land areas (parcels), and habitats (areas meeting user-specified conditions) based on water depth, slope, and aspect criteria. The tool uses data consisting of land-surface elevation, tables of stage/volume and stage/area, and delineated parcel boundaries to produce maps (data layers) of inundated areas and areas that meet the habitat criteria. The tool can be run in a Single-Time Scenario mode or in a Time-Series Scenario mode, which uses an input file of dates and associated stages. The spreadsheet part of the tool uses a macro to process the results from the graphical user interface to create tables and graphs of inundated water volume, inundated area, dry area, and mean water depth for each land parcel based on the user-specified stage. The macro also creates tables and graphs of the area, perimeter, and number of polygons comprising the user-specified habitat areas within each parcel. The Shoreline Management Tool is highly transferable, using easily generated or readily available data. The capabilities of the tool are demonstrated using data from the lower Wood River Valley adjacent to Upper Klamath and Agency Lakes in southern Oregon.

Oregon↗
USGS2024

Lidar estimation of storage capacity for managed water resources used by Desert Bighorn Sheep (Ovis canadensis mexicana) at Cabeza Prieta National Wildlife Refuge, Arizona

In cooperation with the U.S. Fish and Wildlife Service, the U.S. Geological Survey Southwest Biological Science Center employed ground-based light detection and ranging (lidar) during February 2022 to help meet two resource management objectives at the Cabeza Prieta National Wildlife Refuge (CPNWR), Arizona. The two objectives are (1) characterize the water storage capacity for one developed and two modified tanks, which are bedrock catchments also referred to as tinajas, that are important water sources for desert bighorn sheep ( Ovis canadensis mexicana ) in designated wilderness at the CPNWR; and (2) develop a stage-storage model to estimate water volumes from monitoring observations of water surface levels in each tank. We measured storage capacity for the three tanks identified by refuge managers, Buckhorn, Senita, and Eagle, using ground-based lidar collected during February 2022. These data produced high-resolution (centimeter scale) topographic models that improved estimates of maximum water storage capacity over previous geometry-based estimates, permitting estimations of storage capacity at multiple water surface levels (stage heights). We found that the maximum water storage capacity for the Buckhorn, Senita, and Eagle tanks was 9,108.730, 8,623.308, and 6,039.603 US gallons (gal), respectively. For each tank we report a stage-storage model based on a polynomial function that best explained variability in water storage capacity as a function of water stage height. The results presented herein will permit the CPNWR managers to (1) easily estimate water available for wildlife at any point of time, (2) interpret tank recharge following rainstorms, and (3) decide whether and when to transport water via vehicles to mechanically refill the tanks in designated wilderness.

Arizona↗
USGS1957

Geology of the Basin Quadrangle, Montana

The Basin quadrangle, in the northern part of the Boulder Mountains between Butte and Helena, Montana, is underlain principally by igneous rocks that include Late Cretaceous quartz latitic and andesitic Elkhorn Mountains volcanics, quartz monzonite and related rocks of the Boulder batholith, Oligocene(?) quartz latitic volcanic rocks, and late Miocene(?)-early Pliocene(?) rhyolitic volcanic rocks. Sedimentary rocks of the Late Jurassic Morrison formation, the Early Cretaceous Kootenai formation, and the Early Cretaceous lower part of the Colorado formation, crop out in the northwest part of the quadrangle. The batholithic rocks include early stage quartz monzonite, intermediate or main stage quartz monzonite and granodiorite, and late stage aplite and alaskite. The rocks of the main stage are in discontinuous layers approximately conformable to the folded Elkhorn Mountains volcanics that form the roof of the batholith, and may be part of a sill-like body rather than of a batholith in the classic sense. Metamorphic changes in the roof rocks are not conspicuous except in one stratigraphic unit that probably was especially susceptible to thermal reorganization. The batholithic rocks and Elkhorn Mountains volcanics are jointed, and are cut by faults that trend about east, north, N. 20° E., northeast, and northwest. The east-trending faults are most abundant, especially in the eastern part of the quadrangle, and cut only the batholithic and pre-batholithic rocks, whereas many of the faults of other trends cut Tertiary volcanic rocks and a few cut Pleistocene glacial deposits. A surface of moderate relief was cut before eruption of the Oligocene(?) volcanic rocks, and the late Miocene(?)-early Pliocene(?) volcanic rocks covered a deeply weathered surface of low relief. By the Pleistocene a landscape essentially like that of today had been formed, and during the one period of Pleistocene glaciation, valley glaciers and a mountain ice sheet modified the earlier landforms and left extensive deposits of till and outwash. These deposits have been modified in many places by mass-wasting processes that have dominated post-glacial erosion. Mineral deposits in the quadrangle include deposits of disseminated auriferous pyrite, base- and precious-metal bearing quartz veins that occupy the east-trending fault zones, placer deposits of gold and tin, and a few non-metallic deposits, chiefly stone, gravel, and dumortierite. Nearly all of the metallic minerals mined in the quadrangle have come from the east-trending quartz veins and from the placer deposits.

Montana↗
USGS1960

Floods of May 1959 in the Au Gres and Rifle River basins, Michigan

The floods of May 1959 in the Au Gres and Rifle River basins, Michigan, resulted from heavy rainfall during the night of May 19-20. Peak unit discharges for small drainage areas (less than about 15 square miles) were the highest ever measured in the Lower Peninsula of Michigan, and for very small areas (about one square mile) were of the same order of magnitude as those for the record Ontonagon River flood of August 1942 in the Upper Peninsula. Because the flood area is sparsely populated, damages were largely confined to farm lands and facilities and to secondary roads and their appurtenant drainage structures. The U. S. Geological Survey, through the district office in Lansing, Michigan, operates a network of streamgaging stations and crest-stage stations in the area affected by this flood. Six recording rain gages are operated in the upper Rifle River basin. Most of the gaging stations have been in operation for 7 to 9 years giving systematic records of stage, discharge, and volume of flow covering the range from drought to flood. This report contains records of -stage and discharge at 9 gaging stations for the flood period, peak discharges at 7 crest-stage stations and 2 miscellaneous sites within the flood area, and other data pertinent to the flood.

Michigan↗
USGS1972

Analysis of water level data for Everglades National Park, Florida

Stage-duration curves were developed for five gaging stations in Everglades National Park, Florida. Four of the five curves show similar characteristics with an increase in the slope when the water level is below land surface. Monthly stage-duration curves, developed for one of the stations, reflect the seasonal trends of the water level. Recession curves were prepared for the same five stations. These curves represent the average water-level decline during periods of little or no rainfall. They show the decline in level at the end of 10, 20, and 60 days for any given initial stage. A family of curves was also prepared to give the recession from various initial stages for any period up to 60 days.

Florida↗