Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Southeastern Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63Linked to original sources

Airborne electromagnetics (EM) as a three-dimensional aquifer-mapping tool

The San Pedro River in southeastern Arizona hosts a major migratory bird flyway, and was declared a Riparian Conservation Area by Congress in 1988. Recharge of the adjacent Upper San Pedro Valley aquifer was thought to come primarily from the Huachuca Mountains, but the U. S. Army Garrison of Fort Huachuca and neighboring city of Sierra Vista have been tapping this aquifer for many decades, giving rise to claims that they jointly threatened the integrity of the Riparian Conservation Area. For this reason, the U. S. Army funded two airborne geophysical surveys over the Upper San Pedro Valley (see figure 1), and these have provided us valuable information on the aquifer and the complex basement structure underlying the modern San Pedro Valley. Euler deconvolution performed on the airborne magnetic data has provided a depth-to-basement map that is substantially more complex than a map obtained earlier from gravity data, as would be expected from the higher-resolution magnetic data. However, we found the output of the Euler deconvolution to have "geologic noise" in certain areas, interpreted to be post-Basin-and-Range Tertiary volcanic flows in the sedimentary column above the basement but below the ground surface.

Arizona↗

Active metamorphism of upper Cenozoic sediments in the Salton Sea geothermal field and the Salton Trough, southeastern California

The Salton Sea geothermal system is entirely within Pliocene and Quaternary sediments of the Colorado River delta at the north end of the Gulf of California. At the time of deposition, these sediments consisted of sands, silts, and clays of uniform original mineralogic composition, but under the elevated temperatures and pressures of the geothermal system they are being transformed to low-grade metamorphic rocks of the greenschist facies. We have studied these transformations by X-ray, petrographic, and chemical analyses of cuttings and core from deep wells that penetrate the sedimentary section. Temperatures within the explored geothermal system range up to 360° C at 7100 feet. The wells produce a brine containing over 250,000 ppm dissolved solids, primarily Cl, Na, Ca, K, and Fe, plus a host of minor constituents.

California↗

Two diamictons in a landslide scarp on Admiralty Island, Alaska, and the tectonic insignificance of an intervening peat bed

Two till-like diamictons, 700 feet above present sea level on Admiralty Island, Alaska, are separated by peat near the top of a landslide scarp. The lower diamicton is glaciomarine; the upper diamicton is probably a mudflow. The lower diamicton contains the foraminifer Elphidium clavatum Cushman, a species typical of fiords. Similar diamicton crops out along Gastineau Channel near Juneau, 15 miles eastward. Diamicton in both areas reflects deposition in glacier-free fiords during land depression and sea transgression. Consequently, till-like deposits less than 700 feet above sea level elsewhere in southeastern Alaska should be considered as possibly glaciomarine. Sliding occurred after late 1962, but before July 1964; the March 27, 1964, Alaska earthquake might have caused sliding of diamicton saturated by melting snow and spring rains. The peat in the landslide scarp has a published radiocarbon date of 3,400±250 years B.P. (W-1955). The peat was expected to be older, and to relate to Holocene tectonic movement of Admiralty Island. The unexpectedly young date led to additional field study that showed the material over the peat to be a probable mudflow derived from glaciomarine diamicton upvalley; the date has no tectonic significance.

Alaska↗

A previously unrecognized path of early Holocene base flow and elevated discharge from Lake Minong to Lake Chippewa across eastern Upper Michigan

It has long been hypothesized that flux of fresh meltwater from glacial Lake Minong in North America's Superior Basin to the North Atlantic Ocean triggered rapid climatic shifts during the early Holocene. The spatial context of recent support for this idea demands a reevaluation of the exit point of meltwater from the Superior Basin. We used ground penetrating radar (GPR), foundation borings from six highway bridges, a GIS model of surface topography, geologic maps, U.S. Department of Agriculture–Natural Resources Conservation Service soils maps, and well logs to investigate the possible linkage of Lake Minong with Lake Chippewa in the Lake Michigan Basin across eastern Upper Michigan. GPR suggests that a connecting channel lies buried beneath the present interlake divide at Danaher. A single optical age hints that the channel aggraded to 225 m as elevated receipt of Lake Agassiz meltwater in the Superior Basin began to wane <10.6 ka. The large supply of sediment required to accommodate aggradation was immediately available at the channel's edge in the littoral shelves of abandoned Lake Algonquin and in distal parts of post-Algonquin fans. As discharge decreased further, the aggraded channel floor was quickly breached and interbasin flow to Lake Chippewa was restored. Basal radiocarbon ages on wood from small lakes along the discharge path and a GIS model of Minong's shoreline are consistent with another transgression of Minong after ca. 9.5 ka. At the peak of the latter transgression, the southeastern rim of the Superior Basin (Nadoway Drift Barrier) failed, ending Lake Minong. Upon Minong's final drop, aggradational sediments were deposited at Danaher, infilling the prior breach.

Michigan↗

Estimated agricultural pesticide use for Southeast Stream-Quality Assessment, 2014

Introduction One of the goals of the U.S. Geological Survey (USGS) Southeast Stream-Quality Assessment (SESQA) is to characterize contaminants at perennial-stream sites throughout the southern Piedmont and southern Appalachian Mountains. The evaluation of pesticide inputs from agricultural sources will aid in that characterization. Methods used for calculating county-level pesticide use documented in this report are from methods developed and described by Thelin and Stone (2013) and Baker and Stone (2015). Two methods for calculating estimated pesticide use (EPest) rates&mdash;EPest-low and EPest-high&mdash;were applied in this study to estimate a probable range in the annual amounts of pesticide used for agriculture in 2014. To calculate watershed-level estimates, county-level use was proportionally allocated to agricultural land within each watershed. Concentrations of 262 pesticide compounds were estimated and compiled for subsequent analysis by the USGS National Water Quality Assessment Program, Southeast Stream-Quality Assessment. This report provides estimates of annual agricultural use of 262 pesticide compounds for counties and selected watersheds in parts of eight southeastern States for 2014. Estimates of county- and watershed-level annual agricultural pesticide use are provided as downloadable, tab-delimited files for both EPest-high and EPest-low.

Alabama, Georgia, Kentucky, North Carolina, South ↗

Selected metals in sediments and streams in the Oklahoma Part of the Tri-State Mining District, 2000-2006

The abandoned Tri-State mining district includes 1,188 square miles in northeastern Oklahoma, southeastern Kansas, and southwestern Missouri. The most productive part of the Tri-State mining district was the 40-square mile part in Oklahoma, commonly referred to as 'the Picher mining district' in north-central Ottawa County, Oklahoma. The Oklahoma part of the Tri-State mining district was a primary producing area of lead and zinc in the United States during the first half of the 20th century. Sulfide minerals of cadmium, iron, lead, and zinc that remained in flooded underground mine workings and in mine tailings on the land surface oxidized and dissolved with time, forming a variety of oxide, hydroxide, and hydroxycarbonate metallic minerals on the land surface and in streams that drain the district. Metals in water and sediments in streams draining the mining district can potentially impair the habitat and health of many forms of aquatic and terrestrial life. Lakebed, streambed and floodplain sediments and/or stream water were sampled at 30 sites in the Oklahoma part of the Tri-State mining district by the U.S. Geological Survey and the Oklahoma Department of Environmental Quality from 2000 to 2006 in cooperation with the U.S. Environmental Protection Agency, and the Quapaw and Seneca-Cayuga Tribes of Oklahoma. Aluminum and iron concentrations of several thousand milligrams per kilogram were measured in sediments collected from the upstream end of Grand Lake O' the Cherokees. Manganese and zinc concentrations in those sediments were several hundred milligrams per kilogram. Lead and cadmium concentrations in those sediments were about 10 percent and 0.1 percent of zinc concentrations, respectively. Sediment cores collected in a transect across the floodplain of Tar Creek near Miami, Oklahoma, in 2004 had similar or greater concentrations of those metals than sediment cores collected at the upstream end of Grand Lake O' the Cherokees. The greatest concentrations of cadmium, iron, lead, and zinc were detected in sediments beneath an intermittent tributary to Tar Creek, a slough which drains mined areas near Commerce, Oklahoma. In surface water, aluminum and iron concentrations were greatest in the Neosho River, perhaps a result of runoff from areas underlain by shales. The greatest aqueous concentrations of cadmium, lead, manganese, and zinc were measured in water from Tar Creek, the primary small stream draining the Picher mining district with the largest proportion of mined area. Water from the Spring River had greater zinc concentrations than water from the Neosho River, perhaps as a result of a greater proportion of mined area in the Spring River Basin. Dissolved metals concentrations were generally much less than total metals concentrations, except for manganese and zinc at sites on Tar Creek, where seepage of ground water from the mine workings, saturated mine tailings, and/or metalliferous streambed sediments may be sources of these dissolved metals. Iron and lead concentrations generally decreased with increasing streamflow in upstream reaches of Tar Creek, indicating dilution of metals-rich ground water by runoff. Farther downstream in Tar Creek, and in the Neosho and Spring Rivers, metals concentrations tended to increase with increasing streamflow, indicating that most metals in these parts of these streams were associated with runoff and re-suspension of metals precipitated as oxide, hydroxide, and hydroxycarbonate minerals on land surface and streambeds. Estimated total aluminum, cadmium, iron, manganese, and zinc loads generally were greatest in water from the Neosho and Spring Rivers, primarily because of comparatively large streamflows in those rivers. Slight increases in metal loads in the downstream directions on those rivers indicated contributions of metals from inflows of small tributaries such as Tar Creek and from runoff.

Kansas, Missouri, Oklahoma↗

Postimpact deformation associated with the late Eocene Chesapeake Bay impact structure in southeastern Virginia

Upper Cenozoic strata covering the Chesapeake Bay impact structure in southeastern Virginia record intermittent differential movement around its buried rim. Miocene strata in a graben detected by seismic surveys on the York River exhibit variable thickness and are deformed above the crater rim. Fan-like interformational and intraformational angular unconformities within Pliocene–Pleistocene strata, which strike parallel to the crater rim and dip 2°–3° away from the crater center, indicate that deformation and deposition were synchronous. Concentric, large-scale crossbedded, bioclastic sand bodies of Pliocene age within ∼20 km of the buried crater rim formed on offshore shoals, presumably as subsiding listric slump blocks rotated near the crater rim.

Geology↗

Sediment characterization and dynamics in Lake Pontchartrain, Louisiana

Lake Pontchartrain in southeastern Louisiana is the largest of several shallow estuaries that together cover over 15,000 km 2 . Wetlands, forests, and large urban areas surround the lake. Primary transport mechanisms of sediments to Lake Pontchartrain include urban runoff, major diversions of the Mississippi River, discharge from streams along the north and west shores, and tidal circulation. Sediments deposited in Lake Pontchartrain are subjected to resuspension and mixing by natural and human activities. Bioturbation and water turbulence throughout the lake are the major mixing agents, and mechanical shell dredging has reworked much of the lake bottom over the last century. Sediment characterization through direct sampling and geophysical surveys indicates that these processes continually rework the top meter of sediment. The lake receives discharge from roadways and industrial and agricultural sources. Contaminants from these sources accumulate in the lake sediments and are an important contributor to the degradation of the estuary. Decline in populations of various benthic organisms, such as shrimp and clams, has been documented in the lake. To characterize the health of this important estuary, the U.S. Geological Survey (USGS) conducted a comprehensive evaluation of the geology, geomorphology, coastal processes, and environmental condition of the Pontchartrain Basin from 1994 to 1997. This report presents an assessment of sediment distribution and quality using a multidisciplinary approach to characterize the influence of various physical and chemical parameters: nearsurface stratigraphy, major trace metal concentrations (Cu, Pb, Zn, and Ni), and short-lived radionuclides ( 210 Pb, 7 Be, and 137 Cs). The results are compared with water-circulation patterns to determine high-resolution sedimentation patterns in the lake. The data show a significant increase in trace metals in the top 1 m of lake sediments. Above this horizon, pollen analysis indicates a correlation with land clearing in the area, a proxy for increasing human development of the surrounding landscape and an increase in surface run-off. The data also show that the top meter of sediment undergoes frequent resuspension during high-energy circulation events and via circulation gyres in the lake. This regular turnover does not allow stratification of recently deposited sediments, restricting the sequestration of contaminated material that enters the lake.

Louisiana↗

Evidence for extensive methane venting on the southeastern U.S. Atlantic margin

We present the first evidence for widespread seabed methane venting along the southeastern United States Atlantic margin beyond the well-known Blake Ridge diapir seep. Recent ship- and autonomous underwater vehicle (AUV)–collected data resolve multiple water-column anomalies (>1000 m height) and extensive new chemosynthetic seep communities at the Blake Ridge and Cape Fear diapirs. These results indicate that multiple, highly localized fluid conduits punctuate the areally extensive Blake Ridge gas hydrate province, and enable the delivery of significant amounts of methane to the water column. Thus, there appears to be an abundance of seabed fluid flux not previously ascribed to the Atlantic margin of the United States.

Geology↗

Ground-water supplies of the Ypsilanti area, Michigan

As of the date of this report (August 1945), the major water users in the Ypsilanti area are: (1) the city of Ypsilanti, (2) the Willow Run bomber plant, built by the Federal Government and operated by the Ford Motor Co., and (3) the war housing project of the Federal Public Housing Authority, designated in this report the Willow Run Townsite. The city, bomber plant, and townsite have required large quantities of water for domestic and industrial uses, and the necessary water supplies have been developed from wells. The Federal Works Agency had the responsibility of deciding whether the existing water facilities were adequate to meet the expected demands and determining the character of any additional public water-supply facilities that might be constructed with Federal assistance. In order to appraise the ground-water resources of the area the Federal Works Agency requested the Geological Survey to investigate the adequacy of the existing supplies and the availability of additional water. The present report is the result of the investigation, which was made in cooperation with the Michigan Geological Survey Division. The water supplies of the three major users are obtained from wells penetrating glacial and associated sands and gravels. Supplies for the city of Ypsilanti and the Willow Run bomber plant are obtained from wells in the valley of the Huron River; the supply for the Willow Run Townsite is obtained from wells penetrating glacial gravels underlying the upland northeast of the valley. The bedrock formations of the area either yield little water to wells or yield water that is too highly mineralized for most uses. The water supply for the bomber plant is obtained from three closely spaced, highly productive wells at the northern edge of the Huron River, a little more than 3 miles southeast of Ypsilanti. The water receives complete treatment in a modern treatment plant. River water also can be treated and has been used occasionally in the winter and spring. The average daily pumpage during periods of maximum production at the bomber plant has been 4.5 to 4.75 million gallons. On June 30, 1945, production of bombers was suspended, and the plant went on a. maintenance basis. The water supply of the bomber-plant well field is replenished by recharge from precipitation and from the Huron River. The evidence shows that recharge from the river is one of the principal sources of water and gives assurance both of the adequacy of the present supply and of the availability of additional water if needed. The safe yield of the three existing wells is estimated to be not less than 6 million gallons per day. The Ypsilanti public water supply is obtained from three tubular wells drilled in 1943, which replaced a number of suction-pumped tubular wells and one large dug well. All the wells penetrate sand and gravel in the bend of the Huron River in the southeastern part of Ypsilanti. The water is treated in a modern treatment plant completed in 1939. The average daily pumpage in million gallons was about 1.68 in 1942, 1.70 in 1943, and 1.66 in 1944. Considerable water was furnished to the Willow Run bomber plant from the Ypsilanti public-supply system during the period from August 1941 through March 1943. The available information indicates that the water pumped from the Ypsilanti well field is replenished by ground-water flow from adjacent stretches of the Huron Valley and from the upland areas outside the valley, from precipitation on the valley in the vicinity of the well field, and possibly from the Huron River. It is believed that sufficient water can be obtained from the well field to meet the expected demand for a considerable time. The safe yield of the present wells is estimated to be not less than 3 million gallons per day, and detailed pumping tests might show that still larger supplies could be safely developed. The water supply of the Willow Run Townsite is obtained from four wells in two well fields about 2 miles apart, one well in the northwest or Prospect and Geddes Road field, and three wells in the southeast or Wiard Road field. The pumpage was originally expected to be 2 to 3 million gallons per day, but it averaged only about 450,000 gallons per day from March 1943 through June 1945. The evidence afforded by logs of wells and by pumping tests indicates that the water-bearing gravels at the townsite are covered by relatively impermeable materials and thus that the rate of recharge is low. However, only relatively small declines in water level have occurred during more than 2 years' operation of the wells, indicating that recharge may occur nearby. The safe yield of the present wells is estimated to be 1.0 to 1.5 million gallons per day, and detailed pumping tests might show it to be somewhat greater. The water supply of the Willow Run Townsite has the smallest potential capacity of the three major ground-water supplies in the area; however, the demand has been relatively small, and no difficulty should arise unless this demand increases greatly. The investigation involved the drilling of 13 test wells to locate additional ground-water supplies, on the assumption that the wartime demand for water in the Ypsilanti area might increase beyond the capacity of the present sources. All 13 wells were drilled at sites selected by the Geological Survey. Two wells on the Willow Run Townsite were drilled by the Federal Public Housing Authority and 11 at other sites by the Federal Works Agency. Records of the wells are given in the report and discussed with respect to the availability of water at the different sites; similarly, the results of the controlled pumping tests made on four of the test wells drilled by the Federal Works Agency are analyzed and discussed with respect to the availability of additional water. The combined results of the test drilling and the pumping tests show that emergency supplies of several million gallons per day can be developed at the sites of the test wells. The best site shown by the test drilling is on the south bank of the Huron River opposite the bomber-plant well field, where a Well with a capacity of several thousand gallons per minute could be constructed if necessary. Three wells in the outwash-filled valley now occupied by Fleming Creek, on two of which pumping tests were made, show that emergency supplies ranging from a few hundred thousand to a million gallons per day could be developed at these test-well sites if necessary. Smaller Supplies ranging from a gallon or two per minute to perhaps 100,000 or 200,000 gallons per day could be developed at the sites of the remaining test Wells. Pumping tests made on the supply wells of the three major water users by the consulting-engineering firms who designed the systems are analyzed and discussed briefly by the authors. The report includes maps and graphs showing the surficial geology of the area, the location of wells, and fluctuations of water level in selected wells. Alsp included are tables giving data on water levels and pumpage, chemical analyses of representative ground waters, and records of wells.

Michigan↗

Map showing distribution of cadmium and antimony in the nonmagnetic fraction of heavy-mineral concentrates, Richfield 1° x 2° quadrangle, Utah

This map of the Richfield 1° x 2° quadrangle, Utah, shows the regional distribution of cadmium and antimony in the nonmagnetic fraction of drainage-sediment samples. It is part of a folio of maps of the Richfield 1° x 2° quadrangle, Utah, prepared under the Conterminuous United States Mineral Assessment Program. Other published geochemical maps in this folio are listed in the references (this publication). The Richfield quadrangle is located in west-central Utah and includes the eastern part of the Pioche-Marysvale igneous and mineral belt, which extends from the vicinity of Pioche in southeastern Nevada, east-northeastward for 155 miles into central Utah. The western two-thirds of the Richfield quadrangle is part of the Basin and Range province, whereas the eastern third is part of the High Plateaus of Utah, a subprovince of the Colorado Plateau. Bedrock in the northern part of the Richfield quadrangle consists predominantly of Late Proterozoic and Paleozoic sedimentary strata that were thrust eastward during the Sevier orogeny in Cretaceous time onto an autochthon of Mesozoic sedimentary rocks located in the eastern part of the quadrangle. The southern part of the quadrangle is largely underlain by Oligocene and younger volcanic rocks and related intrusions. Extensional tectonism in late Cenozoic time broke the bedrock terrain into a series of north-trending fault blocks; the uplifted mountain areas were eroded to various degrees and the resulting debris was deposited in adjacent basins. Most of the mineral deposits in the Pioche-Marysvale mineral belt were formed as a result of igneous activity in the middle and late Cenozoic time. A more complete description of the geology and a mineral-resource appraisal of the Richfield quadrangle appears in Steven and Morris (1984 and 1987). The regional sampling program was designed to define broad geochemical patterns and trends that can be utilized along with geological and geophysical data to assess the mineral-resource potential for this quadrangle. Reconnaissance geochemical surveys are valuable tools in mineral exploration, especially when used in conjunction with data obtained from other earth science disciplines. Identifying specific exploration targets generally involves additional, more detailed investigations.

Utah↗

Map showing distribution of silver in the nonmagnetic fraction of heavy-mineral concentrates, Richfield 1° x 2° quadrangle, Utah

This map of the Richfield 1° x 2° quadrangle, Utah, shows the regional distribution of silver in the nonmagnetic fraction of heavy-mineral concentrates of drainage-sediment samples. It is part of a folio of maps of the Richfield 1° x 2° quadrangle, Utah, prepared under the Conterminuous United States Mineral Assessment Program. Other published geochemical maps in this folio are listed in the references (this publication). The Richfield quadrangle is located in west-central Utah and includes the eastern part of the Pioche-Marysvale igneous and mineral belt, which extends from the vicinity of Pioche in southeastern Nevada, east-northeastward for 155 miles into central Utah. The western two-thirds of the Richfield quadrangle is part of the Basin and Range province, whereas the eastern third is part of the High Plateaus of Utah, a subprovince of the Colorado Plateau. Bedrock in the northern part of the Richfield quadrangle consists predominantly of Late Proterozoic and Paleozoic sedimentary strata that were thrust eastward during the Sevier orogeny in Cretaceous time onto an autochthon of Mesozoic sedimentary rocks located in the eastern part of the quadrangle. The southern part of the quadrangle is largely underlain by Oligocene and younger volcanic rocks and related intrusions. Extensional tectonism in late Cenozoic time broke the bedrock terrain into a series of north-trending fault blocks; the uplifted mountain areas were eroded to various degrees and the resulting debris was deposited in adjacent basins. Most of the mineral deposits in the Pioche-Marysvale mineral belt were formed as a result of igneous activity in the middle and late Cenozoic time. A more complete description of the geology and a mineral-resource appraisal of the Richfield quadrangle appears in Steven and Morris (1984 and 1987). The regional sampling program was designed to define broad geochemical patterns and trends that can be utilized along with geological and geophysical data to assess the mineral-resource potential for this quadrangle. Reconnaissance geochemical surveys are valuable tools in mineral exploration, especially when used in conjunction with data obtained from other earth science disciplines. Identifying specific exploration targets generally involves additional, more detailed investigations.

Utah↗

Map showing distribution of barium in stream-sediment samples, Richfield 1° x 2° quadrangle, Utah

This map of the Richfield 1° x 2° quadrangle shows the regional distribution of barium in the less-than-0.180-mm (minus-80-mesh) fraction of stream sediments. It is part of a folio of maps of the Richfield 1° x 2° quadrangle, Utah, prepared under the Conterminuous United States Mineral Assessment Program. Other published geochemical maps in this folio are listed in the references (this publication). The Richfield quadrangle is located in west-central Utah and includes the eastern part of the Pioche-Marysvale igneous and mineral belt, which extends from the vicinity of Pioche in southeastern Nevada, east-northeastward for 155 miles into central Utah. The western two-thirds of the Richfield quadrangle is part of the Basin and Range province, whereas the eastern third is part of the High Plateaus of Utah, a subprovince of the Colorado Plateau. Bedrock in the northern part of the Richfield quadrangle consists predominantly of Late Proterozoic and Paleozoic sedimentary strata that were thrust eastward during the Sevier orogeny in Cretaceous time onto an autochthon of Mesozoic sedimentary rocks located in the eastern part of the quadrangle. The southern part of the quadrangle is largely underlain by Oligocene and younger volcanic rocks and related intrusions. Extensional tectonism in late Cenozoic time broke the bedrock terrain into a series of north-trending fault blocks; the uplifted mountain areas were eroded to various degrees and the resulting debris was deposited in adjacent basins. Most of the mineral deposits in the Pioche-Marysvale mineral belt were formed as a result of igneous activity in the middle and late Cenozoic time. A more complete description of the geology and a mineral-resource appraisal of the Richfield quadrangle appears in Steven and Morris (1984 and 1987). The regional sampling program was designed to define broad geochemical patterns and trends that can be utilized along with geological and geophysical data to assess the mineral-resource potential for this quadrangle. Reconnaissance geochemical surveys are valuable tools in mineral exploration, especially when used in conjunction with data obtained from other earth science disciplines. Identifying specific exploration targets generally involves additional, more detailed investigations.

Utah↗

Map showing distribution of bismuth and cadmium in stream-sediment samples, Richfield 1° x 2° quadrangle, Utah

This map of the Richfield 1° x 2° quadrangle shows the regional distribution of bismuth and cadimum in the less-than-0.180-mm (minus-80-mesh) fraction of stream sediments. It is part of a folio of maps of the Richfield 1° x 2° quadrangle, Utah, prepared under the Conterminuous United States Mineral Assessment Program. Other published geochemical maps in this folio are listed in the references (this publication). The Richfield quadrangle is located in west-central Utah and includes the eastern part of the Pioche-Marysvale igneous and mineral belt, which extends from the vicinity of Pioche in southeastern Nevada, east-northeastward for 155 miles into central Utah. The western two-thirds of the Richfield quadrangle is part of the Basin and Range province, whereas the eastern third is part of the High Plateaus of Utah, a subprovince of the Colorado Plateau. Bedrock in the northern part of the Richfield quadrangle consists predominantly of Late Proterozoic and Paleozoic sedimentary strata that were thrust eastward during the Sevier orogeny in Cretaceous time onto an autochthon of Mesozoic sedimentary rocks located in the eastern part of the quadrangle. The southern part of the quadrangle is largely underlain by Oligocene and younger volcanic rocks and related intrusions. Extensional tectonism in late Cenozoic time broke the bedrock terrain into a series of north-trending fault blocks; the uplifted mountain areas were eroded to various degrees and the resulting debris was deposited in adjacent basins. Most of the mineral deposits in the Pioche-Marysvale mineral belt were formed as a result of igneous activity in the middle and late Cenozoic time. A more complete description of the geology and a mineral-resource appraisal of the Richfield quadrangle appears in Steven and Morris (1984 and 1987). The regional sampling program was designed to define broad geochemical patterns and trends that can be utilized along with geological and geophysical data to assess the mineral-resource potential for this quadrangle. Reconnaissance geochemical surveys are valuable tools in mineral exploration, especially when used in conjunction with data obtained from other earth science disciplines. Identifying specific exploration targets generally involves additional, more detailed investigations.

Utah↗

Map showing distribution of copper in stream-sediment samples, Richfield 1° x 2° quadrangle, Utah

This map of the Richfield 1° x 2° quadrangle shows the regional distribution of copper in the less-than-0.180-mm (minus-80-mesh) fraction of stream sediments. It is part of a folio of maps of the Richfield 1° x 2° quadrangle, Utah, prepared under the Conterminuous United States Mineral Assessment Program. Other published geochemical maps in this folio are listed in the references (this publication). The Richfield quadrangle is located in west-central Utah and includes the eastern part of the Pioche-Marysvale igneous and mineral belt, which extends from the vicinity of Pioche in southeastern Nevada, east-northeastward for 155 miles into central Utah. The western two-thirds of the Richfield quadrangle is part of the Basin and Range province, whereas the eastern third is part of the High Plateaus of Utah, a subprovince of the Colorado Plateau. Bedrock in the northern part of the Richfield quadrangle consists predominantly of Late Proterozoic and Paleozoic sedimentary strata that were thrust eastward during the Sevier orogeny in Cretaceous time onto an autochthon of Mesozoic sedimentary rocks located in the eastern part of the quadrangle. The southern part of the quadrangle is largely underlain by Oligocene and younger volcanic rocks and related intrusions. Extensional tectonism in late Cenozoic time broke the bedrock terrain into a series of north-trending fault blocks; the uplifted mountain areas were eroded to various degrees and the resulting debris was deposited in adjacent basins. Most of the mineral deposits in the Pioche-Marysvale mineral belt were formed as a result of igneous activity in the middle and late Cenozoic time. A more complete description of the geology and a mineral-resource appraisal of the Richfield quadrangle appears in Steven and Morris (1984 and 1987). The regional sampling program was designed to define broad geochemical patterns and trends that can be utilized along with geological and geophysical data to assess the mineral-resource potential for this quadrangle. Reconnaissance geochemical surveys are valuable tools in mineral exploration, especially when used in conjunction with data obtained from other earth science disciplines. Identifying specific exploration targets generally involves additional, more detailed investigations.

Utah↗

Map showing distribution of gold in stream-sediment samples, Richfield 1° x 2° quadrangle, Utah

This map of the Richfield 1° x 2° quadrangle, Utah, shows the regional distribution of gold in the less-than-0.180-mm (minus-80-mesh) fraction of stream sediments. It is part of a folio of maps of the Richfield 1° x 2° quadrangle, Utah, prepared under the Conterminuous United States Mineral Assessment Program. Other published geochemical maps in this folio are listed in the Selected References of this report. The Richfield quadrangle is located in west-central Utah and includes the eastern part of the Pioche-Marysvale igneous and mineral belt, which extends from the vicinity of Pioche in southeastern Nevada, east-northeastward for 155 miles into central Utah. The western two-thirds of the Richfield quadrangle is part of the Basin and Range province, whereas the eastern third is part of the High Plateaus of Utah, a subprovince of the Colorado Plateau. Bedrock in the northern part of the Richfield quadrangle consists predominantly of Late Proterozoic and Paleozoic sedimentary strata that were thrust eastward during the Sevier orogeny in Cretaceous time onto an autochthon of Mesozoic sedimentary rocks located in the eastern part of the quadrangle. The southern part of the quadrangle is largely underlain by Oligocene and younger volcanic rocks and related intrusions. Extensional tectonism in late Cenozoic time broke the bedrock terrain into a series of north-trending fault blocks; the uplifted mountain areas were eroded to various degrees and the resulting debris was deposited in adjacent basins. Most of the mineral deposits in the Pioche-Marysvale mineral belt were formed as a result of igneous activity in the middle and late Cenozoic time. A more complete description of the geology and a mineral-resource appraisal of the Richfield quadrangle appears in Steven and Morris (1984 and 1987). The regional sampling program was designed to define broad geochemical patterns and trends that can be utilized along with geological and geophysical data to assess the mineral-resource potential for this quadrangle. Reconnaissance geochemical surveys are valuable tools in mineral exploration, especially when used in conjunction with data obtained from other earth science disciplines. Identifying specific exploration targets generally involves additional, more detailed investigations.

Utah↗

Map showing the distribution of molybdenum in stream-sediment samples, Richfield 1° x 2° quadrangle, Utah

This map of the Richfield 1° x 2° quadrangle, Utah, shows the regional distribution of lead in the less-than-0.180-mm (minus-80-mesh) fraction of stream sediments. It is part of a folio of maps of the Richfield 1° x 2° quadrangle, Utah, prepared under the Conterminuous United States Mineral Assessment Program. Other published geochemical maps in this folio are listed in the references (this publication). The Richfield quadrangle is located in west-central Utah and includes the eastern part of the Pioche-Marysvale igneous and mineral belt, which extends from the vicinity of Pioche in southeastern Nevada, east-northeastward for 155 miles into central Utah. The western two-thirds of the Richfield quadrangle is part of the Basin and Range province, whereas the eastern third is part of the High Plateaus of Utah, a subprovince of the Colorado Plateau. Bedrock in the northern part of the Richfield quadrangle consists predominantly of Late Proterozoic and Paleozoic sedimentary strata that were thrust eastward during the Sevier orogeny in Cretaceous time onto an autochthon of Mesozoic sedimentary rocks located in the eastern part of the quadrangle. The southern part of the quadrangle is largely underlain by Oligocene and younger volcanic rocks and related intrusions. Extensional tectonism in late Cenozoic time broke the bedrock terrain into a series of north-trending fault blocks; the uplifted mountain areas were eroded to various degrees and the resulting debris was deposited in adjacent basins. Most of the mineral deposits in the Pioche-Marysvale mineral belt were formed as a result of igneous activity in the middle and late Cenozoic time. A more complete description of the geology and a mineral-resource appraisal of the Richfield quadrangle appears in Steven and Morris (1984 and 1987). The regional sampling program was designed to define broad geochemical patterns and trends that can be utilized along with geological and geophysical data to assess the mineral-resource potential for this quadrangle. Reconnaissance geochemical surveys are valuable tools in mineral exploration, especially when used in conjunction with data obtained from other earth science disciplines. Identifying specific exploration targets generally involves additional, more detailed investigations.

Utah↗

Map showing the distribution of molybdenum in stream-sediment samples, Richfield 1° x 2° quadrangle, Utah

This map of the Richfield 1° x 2° quadrangle, Utah, shows the regional distribution of molybdenum in the less-than-0.180-mm (minus-80-mesh) fraction of stream-sediments. It is part of a folio of maps of the Richfield 1° x 2° quadrangle, Utah, prepared under the Conterminuous United States Mineral Assessment Program. Other published geochemical maps in this folio are listed in the references (this publication). The Richfield quadrangle is located in west-central Utah and includes the eastern part of the Pioche-Marysvale igneous and mineral belt, which extends from the vicinity of Pioche in southeastern Nevada, east-northeastward for 155 miles into central Utah. The western two-thirds of the Richfield quadrangle is part of the Basin and Range province, whereas the eastern third is part of the High Plateaus of Utah, a subprovince of the Colorado Plateau. Bedrock in the northern part of the Richfield quadrangle consists predominantly of Late Proterozoic and Paleozoic sedimentary strata that were thrust eastward during the Sevier orogeny in Cretaceous time onto an autochthon of Mesozoic sedimentary rocks located in the eastern part of the quadrangle. The southern part of the quadrangle is largely underlain by Oligocene and younger volcanic rocks and related intrusions. Extensional tectonism in late Cenozoic time broke the bedrock terrain into a series of north-trending fault blocks; the uplifted mountain areas were eroded to various degrees and the resulting debris was deposited in adjacent basins. Most of the mineral deposits in the Pioche-Marysvale mineral belt were formed as a result of igneous activity in the middle and late Cenozoic time. A more complete description of the geology and a mineral-resource appraisal of the Richfield quadrangle appears in Steven and Morris (1984 and 1987). The regional sampling program was designed to define broad geochemical patterns and trends that can be utilized along with geological and geophysical data to assess the mineral-resource potential for this quadrangle. Reconnaissance geochemical surveys are valuable tools in mineral exploration, especially when used in conjunction with data obtained from other earth science disciplines. Identifying specific exploration targets generally involves additional, more detailed investigations.

Utah↗