Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geophysical Investigations Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63Linked to original sources
USGS2007

Spectral element modelling of fault-plane reflections arising from fluid pressure distributions

The presence of fault-plane reflections in seismic images, besides indicating the locations of faults, offers a possible source of information on the properties of these poorly understood zones. To better understand the physical mechanism giving rise to fault-plane reflections in compacting sedimentary basins, we numerically model the full elastic wavefield via the spectral element method (SEM) for several different fault models. Using well log data from the South Eugene Island field, offshore Louisiana, we derive empirical relationships between the elastic parameters (e.g. P-wave velocity and density) and the effective-stress along both normal compaction and unloading paths. These empirical relationships guide the numerical modelling and allow the investigation of how differences in fluid pressure modify the elastic wavefield. We choose to simulate the elastic wave equation via SEM since irregular model geometries can be accommodated and slip boundary conditions at an interface, such as a fault or fracture, are implemented naturally. The method we employ for including a slip interface retains the desirable qualities of SEM in that it is explicit in time and, therefore, does not require the inversion of a large matrix. We performa complete numerical study by forward modelling seismic shot gathers over a faulted earth model using SEM followed by seismic processing of the simulated data. With this procedure, we construct post-stack time-migrated images of the kind that are routinely interpreted in the seismic exploration industry. We dip filter the seismic images to highlight the fault-plane reflections prior to making amplitude maps along the fault plane. With these amplitude maps, we compare the reflectivity from the different fault models to diagnose which physical mechanism contributes most to observed fault reflectivity. To lend physical meaning to the properties of a locally weak fault zone characterized as a slip interface, we propose an equivalent-layer model under the assumption of weak scattering. This allows us to use the empirical relationships between density, velocity and effective stress from the South Eugene Island field to relate a slip interface to an amount of excess pore-pressure in a fault zone. ?? 2007 The Authors Journal compilation ?? 2007 RAS.

Geophysical Journal International↗
USGS2019

Authigenic mineral texture in submarine 1979 basalt drill core, Surtsey volcano, Iceland

Micrometer-scale maps of authigenic microstructures in submarine basaltic tuff specimens from a 1979 Surtsey volcano, Iceland, drill core acquired 15 years after eruptions terminated provide fresh perspectives for deciphering the initial alteration of oceanic basalt in a low temperature hydrothermal system. A novel investigative approach integrates synchrotron source X-ray microdiffraction (µXRD), X-ray microfluoresence (µXRF), micro-computed tomography (µCT), and scanning transmission electron microscopy (S/TEM) coupled with Raman spectroscopy to create finely resolved spatial frameworks that record a continuum of alteration in glass and olivine. Micro-analytical maps of vesicular and fractured lapilli in specimens from 157.1, 137.9, and 102.6 m depth, and borehole temperatures of 83, 93.9 and 141.3 °C measured in 1980, respectively, record the production of nanocrystalline clay mineral, zeolites, and Al-tobermorite in diverse microenvironments. Nanocrystalline clay mineral (nontronite) and zeolite (amicite) texture in linear microstructures have concentrically-oriented crystallographic preferred orientation. Raman spectra indicating degraded organic carbonaceous matter are associated with nanocrystalline clay mineral in 10–25 nm, sub-circular nanoscale cavities in altered glass at 137.9 m depth and in a concentrically-layered, crystallographically-oriented linear microstructure in altered olivine at 102.6 m. These features have little resemblance to previously described alteration features in basalt. Irregular alteration fronts between fresh and altered glass at 157.1 depth, however, show a resemblance to microchannels in older basalts. The integrated analyses describe the complex organization of previously unrecognized mineral textures in very young basalt and provide a foundational mineralogical reference for longitudinal, time-lapse characterizations of palagonitized basalt in oceanic environments.

Geochemistry, Geophysics, Geosystems↗
USGS2007

Near-infrared spectral mapping of Titan's mountains and channels

We investigate the spectral reflectance properties of channels and mountain ranges on Titan using data from Cassini's Visual and Infrared Mapping Spectrometer (VIMS) obtained during the T9 encounter (26 December 2005). We identify the location of channels and mountains using synthetic aperture radar maps obtained from Cassini's RADAR instrument during the T13 (30 April 2006) flyby. Channels are evident even in VIMS imaging with spatial resolution coarser than the channel size. The channels share spectral characteristics with Titan's dark blue terrain (e.g., the Huygens landing site) that is consistent with an enhancement in water ice content relative to the rest of Titan. We use this fact to measure widths of ???1 km for the largest channels. Comparison of the data sets shows that in our study area within the equatorial bright spectral unit east of Xanadu, mountains are darker and bluer than surrounding smooth terrain. These results are consistent with the equatorial bright terrain possessing a veneer of material that is thinner in the regions where there are mountains and streambeds that have likely undergone more recent and extensive erosion. We suggest a model for the geographic relationship of the dark blue, dark brown, and equatorial bright spectral units based on our findings.

Journal of Geophysical Research E: Planets↗
USGS2008

Well Inventory and Geophysical Logging of Selected Wells in Troup County, Georgia, 2007-2008

The U.S. Geological Survey (USGS) - in cooperation with the Troup County Board of Commissioners - conducted a well inventory to provide information to help evaluate ground-water resources for Troup County, Georgia. In addition, borehole geophysical logs were collected in selected wells to provide a better understanding of the subsurface geologic and water-bearing characteristics in specific areas of interest. This investigation provides information to help guide future ground-water development and water-management decisions for Troup County while enhancing understanding of the hydrogeology of fractured rocks in the Piedmont physiographic province. This report presents well data compiled from USGS files and from site visits to wells during November and December 2007. Data were entered into the USGS National Water Information System (NWIS) and made available on the Web at http://waterdata.usgs.gov/ga/nwis/inventory. Previous studies of ground-water resources have been conducted in the vicinity, but did not include Troup County. The ground-water resources of Heard and Coweta Counties, located north and northeast, respectively, of Troup County were part of a larger study by Cressler and others (1983) that encompassed the Greater Atlanta Region. That study evaluated the quantity and quality of ground water in the Atlanta region and described the methods that could be used for locating high-yielding wells in the Piedmont Province. The geology underlying the Atlanta area is similar to that underlying Troup County. Clarke and Peck (1990) conducted a similar investigation that included Meriwether and Coweta Counties, located to the east and northeast of Troup County.

Georgia↗
USGS2022

Assessment of well yield, dominant fractures, and groundwater recharge in Wake County, North Carolina

A cooperative study led by the U.S. Geological Survey and Wake County Environmental Services was initiated to characterize the fractured-rock aquifer system and assess the sustainability of groundwater resources in and around Wake County. This report contributes to the development of a comprehensive groundwater budget for the study area, thereby helping to enable resource managers to make sound and sustainable water-supply and water-use decisions. Construction information was used to analyze the well depth, casing depth, and reported well yield of more than 7,500 inventoried wells. The median well depth and casing depth were 265 feet (ft) below land surface (bls) and 68 ft bls, respectively, and the median well yield was 10 gallons per minute. Generally, well yield increased with depth to around 200 ft bls and then began to decrease with depth within the fractured-rock aquifer. Borehole geophysical logging methods were used to characterize the fractured-rock aquifer by mapping the orientation of geologic structures within the subsurface. Structure measurements were made on resulting log data and mapped to observed general spatial trends within the regional groundwater system and more distinct hydrogeologic units. Many of the fractures observed within the borehole logs are steeply dipping across Wake County, although open fractures with shallow dip angles were also observed in most rock classes. Regional geologic structural trends were observed in proximity to the Jonesboro Fault. Potential groundwater recharge in the study area was estimated using a Soil-Water-Balance (SWB) model, as well as using base flow hydrograph separation. The SWB model calculated net infiltration below the root zone for 1981 through 2019 for a 5,402-square-mile area that extends to the counties surrounding Wake County. The mean annual net infiltration rate for the 39-year period was about 8.6 inches per year for the study area. The mean annual net infiltration results from the SWB model were comparable to annual base flow estimates using the PART hydrograph-separation method at six U.S. Geological Survey streamgages within the study area. Mean annual base flow for all six drainage basins was near 7.5 inches per year and estimates ranged from 2.9 to 8.9 inches. Comparisons of mean annual potential recharge from the SWB model and base flow estimates were generally within 2 inches, except during high flows for most of the drainage basins in the study area.

North Carolina↗
USGS2025

Rupture continuity through intermittent pauses in Cascadia slow slip events

Cascadia slow slip events (SSEs) are often envisioned as smooth, continuous ruptures, progressively activating tremor asperities as they propagate. Macroscopically, geodetic inversions and spatiotemporal maps of tremor epicenters show steady, uniform migration. In detail tremor is more chaotic and discontinuous. Larger long-term SSEs observed in daily geodetic solutions are inferred to exhibit intermittent pauses that reflect temporary re-locking of the fault, but this temporal resolution limits tests for similar re-locking on shorter timescales. We use temporal measurements of the areal growth and radiated energy of tremor clusters to investigate SSE intermittence. We find that ruptures mirror tremor pauses. Areal growth rate, however, does not reset, and removing the pauses results in smoother and more similar growth measurements among all SSEs. The rupture similarity occurs regardless of size or location and hints at an underlying uniformity and lack of predeterminism in eventual SSE size. Epicentral uncertainty precludes quantifying early rupture stages, but for larger events areal growth follows a power-law and slows with increasing size. Temporal correlations in tremor energy with inferred SSE propagation velocities and tremor rates suggest its use as a proxy for slip velocity. We find that tremor energy is tidally modulated at daily and sub-daily frequencies, and this modulation is continuous through pauses, suggesting a memory of slip state is sustained through them. We argue these pauses reflect unsteady propagation of the slip front, marked by rapid re- and un-locking, and excluding them removes rupture complexity to reveal a diffusive-like slip process and underlying universality in growth.

California, Oregon, Washington↗
USGS2018

Seismicity induced by wastewater injection in Washington County, Ohio: Influence of preexisting structure, regional stress regime, and well operations

Recent seismicity in Washington County, Ohio, has been suggested to be induced by wastewater disposal operations despite injection ~2 km above the Precambrian basement. We investigated the relationships between disposal well locations and operational histories, spatiotemporal patterns of seismicity enhanced by waveform correlation, and mapped subsurface structures. We also analyzed proxies for in situ stress conditions to evaluate existing principal stress orientations and magnitudes. Double‐difference relocations of small ( M L ≤ 2.1) seismicity revealed linear clusters defining a NE‐SW orientation that parallels the trend of small‐amplitude folds in Upper Paleozoic rocks within 1–2 km of the injection well. Hypocenter depths of ~3.1 to 4.3 km indicate seismicity occurred along faults below the Silurian injection interval in lower Paleozoic strata and Precambrian crystalline basement. Similar folds/faults imaged in nearby seismic reflection lines were associated with basement‐involved fault systems that cut the injection interval targeted by the injection well, providing permeability pathways for fluid pressure increases that initiated slip. Interpreted faults were also optimally oriented in the regional stress field for reactivation due to injection‐related decreases in effective stress. Well completion records suggest that during the recorded seismicity, the Long Run‐1 well was injecting disposal fluids close to or above the fracture pressure of the targeted Silurian injection interval. A comparison of observed seismicity rates and monthly injection records from the disposal well also indicate a close correspondence between earthquake frequency and injection rate. Taken together, these results provide a physical framework for understanding why wastewater disposal operations induced the Washington County seismic sequence.

Ohio↗
USGS2013

Investigations of groundwater system and simulation of regional groundwater flow for North Penn Area 7 Superfund site, Montgomery County, Pennsylvania

Groundwater in the vicinity of several industrial facilities in Upper Gwynedd Township and vicinity, Montgomery County, in southeast Pennsylvania has been shown to be contaminated with volatile organic compounds (VOCs), the most common of which is the solvent trichloroethylene (TCE). The 2-square-mile area was placed on the National Priorities List as the North Penn Area 7 Superfund site by the U.S. Environmental Protection Agency (USEPA) in 1989. The U.S. Geological Survey (USGS) conducted geophysical logging, aquifer testing, and water-level monitoring, and measured streamflows in and near North Penn Area 7 from fall 2000 through fall 2006 in a technical assistance study for the USEPA to develop an understanding of the hydrogeologic framework in the area as part of the USEPA Remedial Investigation. In addition, the USGS developed a groundwater-flow computer model based on the hydrogeologic framework to simulate regional groundwater flow and to estimate directions of groundwater flow and pathways of groundwater contaminants. The study area is underlain by Triassic- and Jurassic-age sandstones and shales of the Lockatong Formation and Brunswick Group in the Mesozoic Newark Basin. Regionally, these rocks strike northeast and dip to the northwest. The sequence of rocks form a fractured-sedimentary-rock aquifer that acts as a set of confined to partially confined layers of differing permeabilities. Depth to competent bedrock typically is less than 20 ft below land surface. The aquifer layers are recharged locally by precipitation and discharge locally to streams. The general configuration of the potentiometric surface in the aquifer is similar to topography, except in areas affected by pumping. The headwaters of Wissahickon Creek are nearby, and the stream flows southwest, parallel to strike, to bisect North Penn Area 7. Groundwater is pumped in the vicinity of North Penn Area 7 for industrial use, public supply, and residential supply. Results of field investigations by USGS at the site and results from other studies support, and are consistent with, a conceptual model of a layered leaky aquifer where the dip of the beds has a strong control on hydraulic connections in the groundwater system. Connections within and (or) parallel to bedding tend to be greater than across bedding. Transmissivities of aquifer intervals isolated by packers ranged over three orders of magnitude [from about 2.8 to 2,290 square feet per day (ft 2 /d) or 0.26 to 213 square meters per day (m 2 /d)], did not appear to differ much by mapped geologic unit, but showed some relation to depth being relatively smaller in the shallowest and deepest intervals (0 to 50 ft and more than 250 ft below land surface, respectively) compared to the intermediate depth intervals (50 to 250 ft below land surface) tested. Transmissivities estimated from multiple-observation well aquifer tests ranged from about 700 to 2,300 ft 2 /d (65 to 214 m 2 /d). Results of chemical analyses of water from isolated intervals or monitoring wells open to short sections of the aquifer show vertical differences in concentrations; chloride and silica concentrations generally were greater in shallow intervals than in deeper intervals. Chloride concentrations greater than 100 milligrams per liter (mg/L), combined with distinctive chloride/bromide ratios, indicate a different source of chloride in the western part of North Penn Area 7 than elsewhere in the site. Groundwater flow at a regional scale under steady-state conditions was simulated by use of a numerical model (MODFLOW-2000) for North Penn Area 7 with different layers representing saprolite/highly weathered rock near the surface and unweathered competent bedrock. The sedimentary formations that underlie the study area were modeled using dipping model layers for intermediate and deep zones of unweathered, fractured rock. Horizontal cell model size was 100 meters (m) by 100 meters (328 ft by 328 ft), and model layer thickness ranged from 6 m (19.7 ft) representing shallow weathered rock and saprolite up to 200 m (656 ft) representing deeper dipping bedrock. The model did not include detailed structure to account for local-scale differences in hydraulic properties, with the result that local-scale groundwater flow may not be well simulated. Additional detailed multi-well aquifer tests would be needed to establish the extent of interconnection between intervals at the local scale to address remediation of contamination at each source area. This regional groundwater-flow model was calibrated against measured groundwater levels (1996, 2000, and 2005) and base flow estimated from selected streamflow measurements by use of nonlinear-regression parameter-estimation algorithms to determine hydraulic conductivity and anisotropy of hydraulic conductivity, streambed hydraulic conductivity, and recharge during calibration periods. Results of the simulation using the calibrated regional model indicate that the aquifer appears to be anisotropic where hydraulic conductivity is greatest parallel to the orientation of bedding of the formations underlying the area and least in the cross-bed direction. The maximum hydraulic conductivity is aligned with the average regional strike of the formations, which is “subhorizontal” in the model because the altitudes of the beds and model cells vary in the strike, as well as dip, direction. Estimated subhorizontal hydraulic conductivities (in strike direction parallel to dipping beds) range from 0.001 to 1.67 meters per day (0.0032 to 5.5 feet per day). The ratio of minimum (dip direction) to maximum (strike direction) subhorizontal hydraulic conductivity ranges from 1/3.1 to 1/8.6, and the ratio of vertical to horizontal hydraulic conductivity ranges from 1/1 to 1/478. However, limited available field data precluded rigorous calibration of vertical anisotropy in the model. Estimated recharge rates corresponding to calibration periods in 1996, 2000, and 2005 are 150, 109, and 124 millimeters per year (5.9, 4.3, and 4.9 inches per year), respectively. The calibrated groundwater-flow model was used to simulate groundwater flow under steady-state conditions during periods of relatively high withdrawals (pumpage) (1990) and relatively low withdrawals (2000 and 2005). Groundwater-flow paths originating from recharge areas near known areas of soil contamination (sources) were simulated. Pumped industrial and production wells captured more groundwater from several of these sources during 1990 than after 1990 when pumping declined or ceased and greater amounts of contaminated groundwater moved away from North Penn Area 7 Superfund site to surrounding areas. Uncertainty in simulated groundwater-flow paths from contaminant sources and contributing areas, resulting from uncertainty in estimated hydraulic properties of the model, was illustrated through Monte Carlo simulations. The effect of uncertainty in the vertical anisotropy was not included in the Monte Carlo simulations. Contributing areas indicating the general configuration of groundwater flow towards production well MG-202 (L-22) in the study area also were simulated for the different time periods; as simulated, the flow paths do not pass through any identified contaminant source in North Penn Area 7. However, contributing areas to wells, such as MG-202, located near many pumped wells are particularly complex and, in some cases, include areas that contribute flow to streams that subsequently recharge the aquifer through stream loss. In these cases, water-quality constituents, including contaminants that are present in surface water may be drawn into the aquifer to nearby pumped wells. Results of a simulated shutdown of well MG-202 under steady-state 2005 conditions showed that the area contributing recharge for nearby production well MG-76 (L-17), when MG-202 is not pumping, shifts downstream and is similar to the area contributing recharge for MG-202 when both wells are pumping. Concentrations of constituents in groundwater samples collected in fall 2005 or spring 2006 were compared to simulated groundwater-flow paths for the year 2005 to provide a qualitative assessment of model results. The observed spatial distribution of selected constituents, including TCE, CFC-11, and CFC-113 in groundwater in 2005 and the chloride/bromide mass ratios in 2006, generally were consistent with the model results of the simulated 2005 groundwater-flow paths at North Penn Area 7, indicating the presence of several separate sources of contaminants within North Penn Area 7.

Pennsylvania↗
USGS1999

Application of continuous seismic-reflection techniques to delineate paleochannels beneath the Neuse River at U.S. Marine Corps Air Station, Cherry Point, North Carolina

A continuous seismic-reflection profiling survey was conducted by the U.S. Geological Survey on the Neuse River near the Cherry Point Marine Corps Air Station during July 7-24, 1998. Approximately 52 miles of profiling data were collected during the survey from areas northwest of the Air Station to Flanner Beach and southeast to Cherry Point. Positioning of the seismic lines was done by using an integrated navigational system. Data from the survey were used to define and delineate paleochannel alignments under the Neuse River near the Air Station. These data also were correlated with existing surface and borehole geophysical data, including vertical seismic-profiling velocity data collected in 1995. Sediments believed to be Quaternary in age were identified at varying depths on the seismic sections as undifferentiated reflectors and lack the lateral continuity of underlying reflectors believed to represent older sediments of Tertiary age. The sediments of possible Quaternary age thicken to the southeast. Paleochannels of Quaternary age and varying depths were identified beneath the Neuse River estuary. These paleochannels range in width from 870 feet to about 6,900 feet. Two zones of buried paleochannels were identified in the continuous seismic-reflection profiling data. The eastern paleochannel zone includes two large superimposed channel features identified during this study and in re-interpreted 1995 land seismic-reflection data. The second paleochannel zone, located west of the first paleochannel zone, contains several small paleochannels near the central and south shore of the Neuse River estuary between Slocum Creek and Flanner Beach. This second zone of channel features may be continuous with those mapped by the U.S. Geological Survey in 1995 using land seismic-reflection data on the southern end of the Air Station. Most of the channels were mapped at the Quaternary-Tertiary sediment boundary. These channels appear to have been cut into the older sediments and deepen in a southerly or downgradient direction. If these paleochannels continue beneath the Marine Corps Air Station and are filled with permeable sediment, they may act as conduits for ground-water flow or movement of contaminants between the surficial and underlying freshwater aquifers where confining units are breached.

North Carolina↗
USGS2008

Digital surfaces and thicknesses of selected hydrogeologic units within the Mississippi Embayment Regional Aquifer Study (MERAS)

Digital surfaces of selected Tertiary and younger age hydrogeologic units within the Mississippi embayment aquifer system were created using more than 2,600 geophysical logs for an area that covers approximately 70,000 square miles and encompasses parts of eight states. The digital surfaces were developed to define and display the hydrogeologic framework for the Mississippi Embayment Regional Aquifer Study (MERAS). The digital surfaces also provide a foundation of the selected hydrogeologic units for development of a steady-state and transient regional ground-water flow model of the Mississippi embayment aquifer system from the top of the Midway confining unit upwards to land surface. The ground-water flow model is under development as part of the U.S. Geological Survey Ground-Water Resources Program. Using a Geographic Information System, nine digital surfaces of the tops of selected hydrogeologic units were created using the Australian National University Digital Elevation Model method as an interpolation scheme. Thickness maps also were constructed using the Geographic Information System by calculating the difference between the altitude of the interpreted base of an overlying unit and the altitude of the interpreted top of an underlying unit. In general, the highest hydrogeologic unit altitudes are located along the eastern edge of the study area in the outcrop, and the lowest altitudes, in general, are located along the southern edge of the study area along the axis of the embayment. The Mississippi River Valley alluvial aquifer and the lower Claiborne aquifer are the thinnest aquifers of importance in the study area; the thickest aquifer of importance is the middle Claiborne aquifer.

Mississippi Embayment Regional Aquifer↗
USGS1998

Non-water-ice constituents in the surface material of the icy Galilean satellites from the Galileo near-infrared mapping spectrometer investigation

We present evidence for several non‐ice constituents in the surface material of the icy Galilean satellites, using the reflectance spectra returned by the Galileo near infrared mapping spectrometer (NIMS) experiment. Five new absorption features are described at 3.4, 3.88, 4.05, 4.25, and 4.57 μm for Callisto and Ganymede, and some seem to exist for Europa as well. The four absorption bands strong enough to be mapped on Callisto and Ganymede are each spatially distributed in different ways, indicating different materials are responsible for each absorption. The spatial distributions are correlated at the local level in complex ways with surface features and in some cases show global patterns. Suggested candidate spectrally active groups, perhaps within larger molecules, producing the five absorptions include C‐H, S‐H, SO 2 , CO 2 , and C≡N. Organic material like tholins are candidates for the 4.57‐ and 3.4‐μm features. We suggest, based on spectroscopic evidence, that CO 2 is present as a form which does not allow rotational modes and that SO 2 is present neither as a frost nor a free gas. The CO 2 , SO 2 , and perhaps cyanogen (4.57 μm) may be present as very small collections of molecules within the crystal structure, perhaps following models for radiation damage and/or for comet and interstellar grain formation at low temperatures. Some of the dark material on these surfaces may be created by radiation damage of the CO 2 and other carbon‐bearing species and the formation of graphite. These spectra suggest a complex chemistry within the surface materials and an important role for non‐ice materials in the evolution of the satellite surfaces.

Journal of Geophysical Research E: Planets↗
USGS2021

Investigation of scale-dependent groundwater/surface-water exchange in rivers by gradient self-potential logging: Numerical modeling and field experiments

Exchanges of groundwater and surface-water are fundamental to a wide range of water-supply and water-quality management issues but challenging to map beyond the reach scale. Waterborne gradient self-potential (SP) measurements are directly sensitive to water flow through riverbed sediments and can be used to infer exchange locations, direction (gain versus loss), scale, and relative changes, but to date applications to river corridor hydrology are limited. Numerical modeling and field experiments were therefore performed herein, each emphasizing waterborne gradient SP logging for identifying and locating focused vertical groundwater discharge (surface-water gain) and recharge (surface-water loss) in a river. Two and three-dimensional numerical models were constructed to simulate the polarities, appearances, and peak amplitudes of streaming-potential and electric-field anomalies on a riverbed and in the surface-water that were attributable to steady-state vertical fluxes of groundwater through high-permeability conduits in the riverbed. Effects of varied hydraulic length-scale of exchange and surface-water depth were tested through numerical modeling. Modeling results aided in data acquisition and interpretation for three repeated field experiments performed along a 1.5–2.0 km reach of the Quashnet River in Cape Cod, Massachusetts, where focused, meter-scale groundwater discharges occur at discrete locations within otherwise ubiquitous and more diffuse groundwater upwelling conditions. Strong gradient SP anomalies were repeatedly measured in the Quashnet River at previously confirmed locations of focused groundwater discharge, showing the efficacy of waterborne gradient SP logging in identifying and characterizing groundwater/surface water exchange dynamics at multiple river network scales.

Massachusetts↗
USGS2012

Seismic reflection/refraction mapping of faulting and regional dips in the eastern Alaska Range

We present the results of a Trans‐Alaska Crustal Transect (TACT) investigation of the upper 2–5 km of the eastern Alaska Range in the vicinity of the Denali fault based on seismic reflection/refraction data, laboratory measurements of rock velocities, and structural mapping. The Denali fault is a major dextral slip structure mappable for more than 2000 km separating the Wrangellia and adjacent terranes to the south from the Yukon‐Tanana and adjacent terranes to the north. Geologic mapping suggests over 400 km of dextral slip has occurred on the fault, yet within the upper 1.5 km of the crust along the TACT corridor, basement rocks juxtaposed along the Denali fault reveal no significant seismic velocity differences, although the fault zone itself is associated with a minor lowering of velocity. The lack of seismic velocity contrast adjacent to the fault is in agreement with laboratory measurements of elastic wave velocities of samples from terranes bordering the fault. Laboratory measurements of elastic wave velocities of the metasedimentary mica‐quartz schists comprising the Yukon‐Tanana basement are highly anisotropic because of preferred orientation of mica and predict significant variations in velocity accompanying variations in foliation dip. Although other interpretations are possible, the northward shallowing of foliation dip of basement rocks in the Yukon‐Tanana terrane combined with the strong anisotropy associated with these highly foliated rocks can explain an observed northward increase in seismic velocity within this terrane. Seismic reflections from basement rocks within the Yukon‐Tanana terrane may originate from variations in anisotropy with depth and/or changes in composition reflecting different proportions of sandstone and shale in the protolith.

Alaska↗
USGS2004

Paleomagnetism and 40Ar/39Ar ages from volcanics extruded during the Matuyama and Brunhes Chrons near McMurdo Sound, Antarctica

Maps of virtual geomagnetic poles derived from international geomagnetic reference field models show large lobes with significant departures from the spin axis. These lobes persist in field models for the last few millenia. The anomalous lobes are associated with observation sites at extreme southerly latitudes. To determine whether these features persist for millions of years, paleomagnetic vector data from the continent of Antarctica are essential. We present here new paleomagnetic vector data and 40 Ar/ 39 Ar ages from lava flows spanning the Brunhes and Matuyama Chrons from the vicinity of McMurdo Sound, Antarctica. Oriented paleomagnetic samples were collected from 50 lava flows by E. Mankinen and A. Cox in the 1965–1966 austral summer season. Preliminary data based largely on the natural remanent magnetization (NRM) directions were published by Mankinen and Cox [1988]. We have performed detailed paleomagnetic investigations of 37 sites with multiple fully oriented core samples to investigate the reliability of results from this unique sample collection. Of these, only one site fails to meet our acceptance criteria for directional data. Seven sites are reversely magnetized. The mean normal and reverse directions are antipodal. The combined mean direction has = 12, = −86, α = 4, κ = 37 and is indistinguishable from that expected from a GAD field. We obtained reproducible absolute paleointensity estimates from 15 lava flows with a mean dipole moment of 49 ZAm 2 and a standard deviation of 28 ZAm 2 . 40 Ar/ 39 Ar age determinations were successfully carried out on samples from 18 of the flows. Our new isotopic ages and paleomagnetic polarities are consistent with the currently accepted geomagnetic reversal timescales.

Geochemistry, Geophysics, Geosystems↗
USGS2014

The 17 May 2012 M4.8 earthquake near Timpson, East Texas: An event possibly triggered by fluid injection

This study summarizes our investigation of the 17 May 2012 MW-RMT4.8 earthquake near Timpson, Texas, the largest earthquake recorded historically in eastern Texas. To identify preshocks and aftershocks of the 17 May event we examined the arrivals recorded at Nacogdoches (NATX) 30 km from the 17 May epicenter, at nearby USArray Transportable Array stations, and at eight temporary stations deployed between 26 May 2012 and mid-2013. At NATX we identified seven preshocks, the earliest occurring in April 2008. Reliably located aftershocks recorded by the temporary stations lie along a 6 km long NW-SE linear trend corresponding to a previously mapped basement fault that extends across the highest-intensity (MMI VII) region of the 17 May main shock. Earthquakes in this sequence are relatively shallow—with focal depths ranging from 1.6 to 4.6 km. Evidence supporting these depths include: hypocentral locations of exceptionally well-recorded aftershocks, S-P intervals at the nearest stations, and comparisons of synthetics and observed seismograms. Within 3 km of the linear trend of aftershock activity there are two Class II injection disposal wells injecting at 1.9 km depth beginning in August 2006 and February 2007, with injection rates averaging 42,750 m3/mo and 15,600 m3/mo, respectively. Several observations support the hypothesis that fluid injection triggered the Timpson sequence: well-located epicenters are situated near a mapped basement fault and near high-volume injection wells, focal depths are at or below the depths of injection, and the earliest preshock (April 2008) occurred after the onset of injection in 2006.

Texas↗
USGS2012

Landslides in Valles Marineris, Mars

Large landslides in the Martian equatorial troughs have been investigated with respect to morphology, geologic structure of the troughs, time of emplacement, similarity to terrestrial landslides, and origin and mechanism of transport. Viking Orbiter images provided a base for morphologic analyses, mapping, crater counts, and volumetric considerations. Results showed that the morphologic variations of the landslides can be attributed mainly to their degree of confinement on trough floors. Many prominent landslides appear to be of similar age and were emplaced after a major episode of faulting that created scarps of great relief. Most sliding apparently occurred after these scarps were dissected into spurs, gullies, and tributary canyons. Much of the slide activity coincided with a major late eruptive phase of the Tharsis volcanoes, as deduced from the crater density, over the total deposit area, of 570±130 craters larger than 1 km in diameter per 10 6 km 2 . The huge size of many landslides is due to their occurrence on fault scarps that may have attained several kilometers in height in the absence of vigorous fluvial erosion on Mars. The mechanical efficiency of the Martian landslides is high but in accord with predictions from large landslides on earth. The slides may have originated as gigantic mudflows with slump blocks at their heads; water that may have existed in aquifers in the wallrock below and behind a lid of ice may have been liberated through minor disturbances from Marsquakes. Liquefaction and collapse of extensive wall sections may then have ensued, and the debris rushed out onto the trough floors at speeds exceeding 100 km/h.

Journal of Geophysical Research Solid Earth↗
USGS1996

Identifying coseismic subsidence in tidal-wetland stratigraphic sequences at the Cascadia subduction zone of western North America

Tidal-wetland stratigraphy reveals that great plate boundary earthquakes have caused hundreds of kilometers of coast to subside at the Cascadia subduction zone. However, determining earthquake recurrence intervals and mapping the coastal extent of past great earthquake ruptures in this region are complicated by the effects of many sedimentologic, hydrographic, and oceanographic processes that occur on the coasts of tectonically passive as well as active continental margins. Tidal-wetland stratigraphy at many Cascadia estuaries differs little from that at similar sites on passive-margin coasts where stratigraphic sequences form through nonseismic processes unrelated to coseismic land level changes. Methods developed through study of similar stratigraphic sequences in Europe provide a framework for investigating the Cascadia estuarine record. Five kinds of criteria must be evaluated when inferring regional coastal subsidence due to great plate boundary earthquakes: the suddenness and amount of submergence, the lateral extent of submerged tidal-wetland soils, the coincidence of submergence with tsunami deposits, and the degree of synchroneity of submergence events at widely spaced sites. Evaluation of such criteria at the Cascadia subduction zone indicates regional coastal subsidence during at least two great earthquakes. Evidence for a coseismic origin remains equivocal, however, for the many peat-mud contacts in Cascadia stratigraphic sequences that lack (1) contrasts in lithology or fossils indicative of more than half a meter of submergence, (2) well-studied tsunami deposits, or (3) precise ages needed for regional correlation. Paleoecologic studies of fossil assemblages are particularly important in estimating the size of sudden sea level changes recorded by abrupt peat-mud contacts and in helping to distinguish erosional and gradually formed contacts from coseismic contacts. Reconstruction of a history of great earthquakes for the Cascadia subduction zone will require rigorous application of the above criteria and many detailed investigations.

Journal of Geophysical Research B: Solid Earth↗
USGS1998

Evaluation of hydrologic data collected at the North Penn Area 12 Superfund Site, Montgomery County, Pennsylvania

The North Penn Area 12 Superfund Site is underlain by the Lockatong Formation, which consists of interbedded gray to black siltstone and shale. The beds of the Lockatong Formation strike northeast and dip about 10d to 20d to the northwest in the vicinity of the site. Ground water moves through fractures that are nearly vertical and horizontal in the shale and siltstone. Permeability and storage are very low. Borehole-geophysical logs were obtained from eight wells to determine the location of fractures, water-producing and water-receiving intervals, and intervals of borehole flow. The logs also were used to quantify fluid movement in the borehole, to characterize the lithology, and to obtain data on well construction. The logs indicate fractures at depths less than 100 feet are more frequent and generally are more productive than fractures at depths greater than 100 feet. The fluid resistivity of water in shallow intervals usually was greater than that in deeper intervals. The rate and direction of fluid movement under nonpumping conditions differs in the boreholes logged. In the northwest part of the site, no vertical flow was detected in three wells and very small amounts of flow were measured in two wells. In the southwest part of the site, downward flow was measured in two wells. Aquifer-isolation tests in three wells provided information on hydraulic heads and specific capacities in discrete vertical intervals and allowed collection of water samples form discrete water-bearing intervals. Natural annual fluctuations of water levels in 11 wells ranged form 11.4 to 28.3 feet. Seven of the 11 wells gave very similar water-level hydrographs. The four southernmost wells on the site show rises in water levels after precipitation much sooner than the other seven wells. Two other wells show daily fluctuations caused by pumping. A potentiometric-surface map of the site and vicinity was prepared from water-level measurements made in late July 1995. The map can be used to determine the approximate direction of ground-water flow.

Water-Resources Investigations Report↗