Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geological Society of London Special Publications”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,664 records · Page 63Linked to original sources
USGS2024

Probabilistic assessment of postfire debris-flow inundation in response to forecast rainfall

Communities downstream of burned steep lands face increases in debris-flow hazards due to fire effects on soil and vegetation. Rapid postfire hazard assessments have traditionally focused on quantifying spatial variations in debris-flow likelihood and volume in response to design rainstorms. However, a methodology that provides estimates of debris-flow inundation downstream of burned areas based on forecast rainfall would provide decision-makers with information that directly addresses the potential for downstream impacts. We introduce a framework that integrates a 24 h lead-time ensemble precipitation forecast with debris-flow likelihood, volume, and runout models to produce probabilistic maps of debris-flow inundation. We applied this framework to simulate debris-flow inundation associated with the 9 January 2018 debris-flow event in Montecito, California, USA. When the observed debris-flow volumes were used to drive the probabilistic forecast model, analysis of the simulated inundation probabilities demonstrates that the model is both reliable and sharp. In the fully predictive model, however, in which debris-flow likelihood and volume were computed from the atmospheric model ensemble's predictions of peak 15 min rainfall intensity, I 15 , the model generally under-forecasted the inundation area. The observed peak I 15 lies in the upper tail of the atmospheric model ensemble spread; thus a large fraction of ensemble members forecast lower I 15 than observed. Using these I 15 values as input to the inundation model resulted in lower-than-observed flow volumes which translated into under-forecasting of the inundation area. Even so, approximately 94 % of the observed inundated area was forecast to have an inundation probability greater than 1 %, demonstrating that the observed extent of inundation was generally captured within the range of outcomes predicted by the model. Sensitivity analyses indicate that debris-flow volume and two parameters associated with debris-flow mobility exert significant influence on inundation predictions, but reducing uncertainty in postfire debris-flow volume predictions will have the largest impact on reducing inundation outcome uncertainty. This study represents a first step toward a near-real-time hazard assessment product that includes probabilistic estimates of debris-flow inundation and provides guidance for future improvements to this and similar model frameworks by identifying key sources of uncertainty.

California↗
USGS2026

Earthquake rupture arrest from depth‐dependent frictional stability on the Pütürge segment of the East Anatolian Fault Zone, Türkiye (Turkey)

Determining why earthquake ruptures stop is a central challenge in earthquake science and seismic hazard assessment. The Pütürge segment of the East Anatolian Fault Zone, Türkiye, exhibits shallow creep (<∼3 km depth) yet hosts M > 6.5 earthquake ruptures at greater depth. Here, we evaluate whether variations in frictional stability along this segment aided arrest of the 2020 M 6.7 Elaziğ and 2023 M 7.8 Pazarcık earthquake ruptures. Analysis of Sentinel‐1 Synthetic Aperture Radar imagery indicates the 2023 M 7.8 rupture propagated laterally into a metamorphic massif within the Pütürge segment, where slip rapidly decayed below detection limits. Creepmeters along this segment recorded no significant surface afterslip (<3 mm) in the following year. To investigate this fault‐slip behavior, we conducted triaxial friction experiments on Pütürge fault gouge sampled from an outcrop exposure. The gouge, composed primarily of muscovite, quartz, and calcite, is velocity strengthening at conditions approximating 0–2.5 km depth and velocity weakening at 4–5 km depth. This transition to velocity‐weakening friction is associated with enhanced comminution and shear localization observed microstructurally. Our results suggest that depth‐dependent frictional stability of the Pütürge fault segment facilitates rupture nucleation and propagation at depth while maintaining rupture‐arresting behavior near Earth’s surface.

Pütürge segment of the East Anatolian Fault Zone↗
USGS2024

Shallow lake, strong shake: Record of seismically triggered lacustrine sedimentation from the 1959 M7.3 Hebgen Lake earthquake within Henrys Lake, Idaho

We investigate a shallow lake basin for evidence of a large historic intraplate earthquake in western North America. Henrys Lake, Idaho is an atypical candidate for a lacustrine paleoseismic study given its shallow depth (~7 m) and low relief (≤2° slopes ). Here, we test the earthquake-recording capacity of this basin type by showing sedimentological evidence of the 1959 M7.3 Hebgen Lake earthquake within sediment cores, using anthropogenically produced 137 Cs activity to constrain timing. In addition to expanding the morphologic range of basins targeted for lacustrine paleoseismic studies, this work has implications for sediment response in dam-enhanced basins. Lack of sedimentological evidence for other earthquakes coupled with radiocarbon chronology reveals that the 1959 event is the only clearly recorded earthquake within Henrys Lake since the mid-Holocene. Henrys Lake offers a proxy for paleo-earthquake signatures within similar lacustrine environments and underscores the importance of further paleoseismic studies in the region.

Idaho↗
USGS2021

Factors influencing distribution of Coccidioides immitis in soil, Washington State, 2016

Coccidioides immitis and Coccidioides posadasii are causative agents of Valley fever, a serious fungal disease endemic to regions with hot, arid climate in the United States, Mexico, and Central and South America. The environmental niche of Coccidioide s spp. is not well defined, and it remains unknown whether these fungi are primarily associated with rodents or grow as saprotrophs in soil. To better understand the environmental reservoir of these pathogens, we used a systematic soil sampling approach, quantitative PCR (qPCR), culture, whole-genome sequencing, and soil chemical analysis to identify factors associated with the presence of C. immitis at a known colonization site in Washington State linked to a human case in 2010. We found that the same strain colonized an area of over 46,000 m 2 and persisted in soil for over 6 years. No association with rodent burrows was observed, as C. immitis DNA was as likely to be detected inside rodent holes as it was in the surrounding soil. In addition, the presence of C. immitis DNA in soil was correlated with elevated levels of boron, calcium, magnesium, sodium, and silicon in soil leachates. We also observed differences in the microbial communities between C. immitis -positive and -negative soils. Our artificial soil inoculation experiments demonstrated that C. immitis can use soil as a sole source of nutrients. Taken together, these results suggest that soil parameters need to be considered when modeling the distribution of this fungus in the environment.

Washington↗
USGS2025

Foundational uncertainties in terminal Ediacaran chronostratigraphy revealed by high-precision zircon U-Pb geochronology of the Nama Group, Namibia

The Nama Group of southern Namibia and northwestern South Africa hosts the best-dated mixed carbonate-siliciclastic foreland basin succession of the terminal Ediacaran [ca. 551 million years (Ma) ago to <538 Ma] and is key for resolving the chronology of early metazoan evolution. Numerous silicified volcanic tuff interbeds are present, but differing interpretations regarding the fidelity of their ages lead to different regional stratigraphic correlations, especially for the Urusis Formation of the Schwarzrand Subgroup. An expanded record of the Urusis Formation is found in the Swartpunt area of southern Namibia, which has yielded an important metazoan biota. But the succession in this area is preserved as a series of thrusts at the leading edge of the Gariep orogenic belt and zircon U-Pb data show systematic age repetition. We use regional stratigraphic and structural mapping, integrated with carbonate carbon isotope (δ 13 C carb ) chemostratigraphy and high-precision radioisotope U-Pb zircon geochronology from outcrop and recently acquired drill core to develop a temporally calibrated basin-wide depositional model. This integrated dataset either reflects complex zircon reworking, inheritance, or potential analytical biases (Scenario 1) or the presence of a Gariep-related cryptic décollement within the Spitskop Member that has resulted in stratigraphic repetition (Scenario 2). We investigate the evidence for and against both scenarios and consider their implications for stratigraphic and δ 13 C carb correlations between the Swartpunt area and coeval exposures along the Orange River border with South Africa. Given that these issues are in an area that hosts numerous silicified ash beds and extensive exposure, an inability to confidently discount either scenario highlights a level of compounding uncertainty in zircon U-Pb geochronology that must be considered when attempting to build global chronostratigraphic frameworks. Scenario 1 implies that some of the weighted mean ages and Bayesian eruption ages from the Swartpunt area may be >1 Myr older than the depositional age of their respective ash beds when assuming existing stratigraphic correlations. If this scenario is preferred, then a cautious approach would be to consider all weighted mean zircon U-Pb ages from ash beds to reflect maximum depositional ages. Both scenarios support deposition of the Huns Member >540 Ma in the Swartpunt area if the oldest weighted mean age reported here represents a near-depositional age, which has significant implications for the temporal calibration of important terminal Ediacaran ichnofossil assemblages and future cyclostratigraphic studies. Stratigraphic correlations common to both scenarios allow us to temporally calibrate a basin evolution model for the Nama Group. Temporal trends in initial hafnium isotope (εHf) compositions of zircon grains from ash beds throughout the succession may support progressive crustal thickening associated with underplating of the Damara orogenic belt along the northern periphery of the Kalahari craton from ca. 547 Ma to ca. 538 Ma. The compilation of new and published zircon U-Pb ages may also imply that the locus of carbonate platform development migrated from north to south (present co-ordinates), tracking the migration of foredeep subsidence.

Earth-Science Reviews↗
USGS2025

Invited perspectives: Integrating hydrologic information into the next generation of landslide early warning systems

Although rainfall-triggered landslides are initiated by subsurface hydro-mechanical processes related to the loading, weakening, and eventual failure of slope materials, most landslide early warning systems (LEWS) have relied solely on rainfall event information. In previous decades, several studies demonstrated the value of integrating proxies for subsurface hydrologic information to improve rainfall-based forecasting of shallow landslides. More recently, broader access to commercial sensors and telemetry for real-time data transmission has invigorated new research into hydrometeorological thresholds for LEWS. Given the increasing number of studies across the globe using hydrologic monitoring, mathematical modeling, or both in combination, it is now possible to make some insights into the advantages versus limitations of this approach. The extensive progress demonstrates the value of in situ hydrologic information for reducing both failed and false alarms, through the ability to characterize infiltration during, as well as the drainage and drying processes between major storm events. There are also some areas for caution surrounding the long-term sustainability of subsurface monitoring in landslide-prone terrain, as well as unresolved questions in hillslope hydrologic modeling, which relies heavily on the assumptions of diffuse flow and vertical infiltration but often ignores preferential flow and lateral drainage. Here, we share a collective perspective based on our previous collaborative work across Europe, North America, Africa, and Asia to discuss these challenges and provide some guidelines for integrating knowledge of hydrology and climate into the next generation of LEWS. We propose that the greatest opportunity for improvement is through a measure-and-model approach to develop an understanding of landslide hydro-climatology that accounts for local controls on subsurface storage dynamics. Additionally, new efforts focused on the subsurface hydrology are complementary to existing rainfall-based methods, so leveraging these with near-term precipitation forecasts is a priority for increasing lead times.

Alaska↗
USGS2024

Quantitative risk of earthquake disruption to global copper and rhenium supply

Earthquakes have the potential to substantially affect mining operations, potentially leading to supply chain disruptions and adversely affecting the global economy. This study explores the quantification of earthquake risk to copper and rhenium commodity supply by examining the spatial concentration of high earthquake hazard areas and the commodity-specific mining, smelting, and refining operations across the globe. Because many of the largest facilities are concentrated geographically near the highly seismic regions of South America, East Asia, and the Pacific, there is a potential for cascading effects on the entire supply chain. The analysis indicates that the expected annual disruption of global production is 0.3–1.1 percent for copper mines, 1.8–4.0 percent for smelters, and 1.5–3.3 percent for refineries. Expected annual disruption of global rhenium production capacity is 0.32–1.32 percent. The research highlights that the potential lost revenue from earthquake disruptions is from $315 million to $1.29 billion for copper mining, $1.92 billion to $4.33 billion for copper smelting, $2.06 billion to $4.52 billion for copper refining, and $337,000 to $1.40 million for rhenium production capacity.

Open-File Report↗
USGS2026

Structural evolution and slip rate variations through time of the Puente-Hills blind-thrust fault beneath Los Angeles: Implications for seismic hazard and folding kinematics

Using seismic reflection profiles, historical well logging data, and luminescence and radiocarbon ages, we determine a Pleistocene-Holocene slip history for the central, Santa Fe Springs segment of the Puente Hills blind-thrust fault (PHT), a major seismogenic fault situated beneath the urbanized Los Angeles metropolitan region. We analyze the geometry of correlative stratigraphic units in the forelimb and backlimb of the overlying growth-fold, the Santa Fe Springs anticline, and determine the uplift of seven age-correlative markers. Uplift measurements are converted to thrust displacements on the underlying PHT using a structural method laid out by Don et al. (2022, https://doi.org/10.1785/0120220048 ) that accounts for the geometry of the fault. These data indicate that deep thrust displacement on the PHT is partially consumed updip in the creation of a hanging-wall fault-bend fold, with forelimb growth strata recording <80% of the slip documented within the backlimb. Chronological data from growth strata yield age constraints for folding and faulting on the underlying PHT, providing a detailed incremental slip history derived from both the forelimb and backlimb folding for seven discrete growth horizons, spanning the past 1.4 million years. The resulting six incremental slip rates demonstrate that fault slip has varied through time from the middle Pleistocene to the Holocene. Moreover, these results reveal synchronous acceleration of both the central, Santa Fe Springs and western, Los Angeles segments of the fault system since late Pleistocene time (after 200 ka) and slip rates of greater than 2 mm/yr on the downdip, backlimb, fault-ramp below the anticline.

California↗
USGS2024

Timing and geometry of the Chemehuevi Formation reveal a late Pleistocene sediment pulse into the Lower Colorado River

The Chemehuevi Formation is a distinctive 50−150-m-thick wedge-shaped Pleistocene sedimentary unit deposited by the Colorado River. It lines the perimeters of the river’s floodplains and bedrock canyons for more than 600 km between the mouth of the Grand Canyon and the delta region in the Gulf of California. The formation is composed of a basal tan to light-yellowish-brown and pale-orange mud-dominated facies overlain and interbedded by a light-yellow-brown sand-dominated facies. The unit is one of two extensively exposed aggradational packages in the Lower Colorado River corridor, in addition to a series of other smaller alluvial terrace deposits. The Chemehuevi Formation appears to represent the response of a fully integrated Colorado River system to a significant perturbation, in contrast to the Bullhead Alluvium, which is likely a unique result of Pliocene river integration. The aggradation of the Chemehuevi Formation in the Lower Colorado River corridor may be similarly due to a unique event in the Colorado River system, or it may instead be a well-preserved sedimentary sequence recording typical behavior of the Colorado River below the Grand Canyon in the late Pleistocene. As such, multiple causal mechanisms have been proposed, but no study to date has conclusively explained the Chemehuevi Formation. To help resolve its timing, duration, and origin, we applied post-infrared infrared stimulated luminescence, carbonate U-Th series, and zircon sensitive high-resolution ion microprobe U-Th series geochronology to determine the ages of key exposures of the unit over a wide spatial area. These new data demonstrate that the Chemehuevi Formation was deposited ca. 110−90 ka. The depositional ages collectively overlap, suggesting that deposition occurred rapidly relative to the resolution of the geochronometers. The new depositional timing coincides with a shift from glacial to interglacial conditions after the marine isotope stage 5-6 transition. This observation is consistent with a climate-induced sediment pulse as a causal mechanism, yet correlations with similar deposits in the Colorado River headwaters or in neighboring catchments appear elusive. Potentially, climate transitions between glacial and interglacial periods induced a sediment pulse from hillslopes of the Colorado River system that resulted in the Chemehuevi Formation. An alternative or additional explanation is that the Chemehuevi Formation represents release of lava dam−impounded sediment in the Grand Canyon. The surface geometry of the Chemehuevi Formation projects upstream to the approximate location of lava dams, and the largest possible lava dam impoundment (the Upper Prospect dam) is comparable in volume to the formation. The lava dam hypothesis appears to be a possible explanation for the Chemehuevi Formation. However, tying deposition to a specific lava dam or series of lava dams remains challenging due to discrepancies in timing and volume. The combined effects of a series of lava dams may have led to the Chemehuevi Formation, as the last Pleistocene lava dam eruption coincides with the onset of deposition. Alternatively, the formation may result from the combined effects of both regional climate transitions and the lava dams that created a transient reservoir to compound a climate transition−driven sediment pulse. The geochronologic data presented here do not allow us to distinguish between the lava dam or climate transition hypotheses but will need to be reconciled with any future proposed depositional model.

Arizona, California, Nevada↗
USGS2026

Effects of human activity on Khumbu Glacier: Towards a sustainable Everest Base Camp

The Everest Base Camp (EBC), a critical staging area for mountaineers attempting to summit Mount Everest, has seen a significant increase in human activity over the past few decades. The increasing number of climbers, trekkers, and support staff, particularly at the campsite area, has intensified environmental impacts on the Khumbu Glacier. This study investigates the effects of human activity at EBC, focusing on three contributors to glacier melt: global climate change, local fossil fuel consumption, and human urinary discharge. Through field data collected during the spring 2023 climbing season, this study examines the energy released through the use of liquefied petroleum gas (LPG), kerosene, and petrol for cooking, heating, and electricity, as well as the heat generated by human urinary discharge. The total heat energy released from these activities at EBC in the spring of 2023 was 849,174 ± 179,774 MJ, which would be sufficient to melt 2492 ± 528 tons of glacier ice and snow. Trends in land surface temperature at EBC and adjacent environments during the 1991–2023 period were calculated from Landsat 5, 7, and 9 satellite data. The 32-year Landsat record reveals that EBC surface temperature increased by 0.28 °C year −1 , which was roughly twice the rate of warming at the surface of Khumbu Glacier adjacent to EBC and about 15% higher than the temperature increase of the debris-covered terrain immediately to the north of EBC. The findings suggest that addressing these anthropogenic influences could help to preserve the Khumbu Glacier and support the sustainability of mountaineering in the region. This paper also takes a transformative approach and explores stable and safer locations in case there is a necessity to relocate the current EBC. Two sites have been identified southwest of the existing EBC, which, unlike the current supraglacial site, are situated on stable ground.

Everest Base Camp, Khumbu Glacier↗
USGS2026

The Great Salt Lake (Utah, USA) acoustic and sedimentary archive of Wasatch Front earthquakes

As the largest low-relief basin in the western United States, the Great Salt Lake offers an opportunity to explore acoustic and sedimentary archives of earthquake ruptures in a shallow terminal basin. Here, we use subbottom compressed high intensity radiated pulse (Chirp) profiles and sedimentary cores to address questions related to how Great Salt Lake sediments respond to surface rupture and earthquake shaking and whether the lake is sensitive to both Great Salt Lake fault (GSLF) and Wasatch fault zone (WFZ) earthquakes. Chirp profiles reveal laterally continuous seismic stratigraphy with vertically displaced strata, onlap surfaces, and growth stratigraphy produced by GSLF surface ruptures. We identify and date two ruptures on the Fremont Island section and three on the Antelope Island section; temporal overlap of these ruptures supports synchronous rupture of both sections. Combined with previous data, our results yield a record of four Holocene surface-rupturing (M W 6.9−7.3) earthquakes on the GSLF with a mean recurrence of ∼3.2 k.y. Sediment cores include ≤41-cm-thick, massive, homogeneous to normally graded disturbance beds that interrupt laminated bioclastic sediment. Disturbance bed correlations yield four lacustrine earthquake deposits since ca. 1.7 ka; the youngest possibly records the most recent GSLF surface rupture whereas older deposits were likely produced by WFZ earthquakes. Modeled historical earthquakes yield a Great Salt Lake sediment disturbance shaking threshold of MMI ∼VI, controlled in part by the lake-bottom expression of the GSLF scarp. Our integration of primary (fault-related) and secondary (shaking-related) earthquake evidence improves our understanding of sediment disturbance processes and the archival potential of low-relief lake basins.

Utah↗
USGS1989

An investigation of shallow ground-water quality near East Fork Poplar Creek, Oak Ridge, Tennessee

Alluvial soils and fill materials in and near the floodplain of East Fork Poplar Creek in Oak Ridge, Tennessee, are contaminated with various trace metals (primarily mercury), organic compounds, and radionuclides that were lost to the stream as a result of past operations at the Y-12 Plant, a nuclear-processing facility located within the U.S. Department of Energy’s Oak Ridge Reservation. Observation wells were installed in the shallow (above bedrock) aquifer in and near the floodplain of East Fork Poplar Creek and water-quality samples were collected to determine if contaminants found in the soils and fill are also present in the shallow ground water. The shallow aquifer in the East Fork Poplar Creek flood plain consists primarily of alluvial silt and clay with lesser amounts of sand and gravel. Thickness of the shallow aquifer ranges from essentially zero to as much as 20 feet. A silty-clay glei horizon is present between the base of the alluvium and the top of bedrock at most flood-plain locations and, where present, likely impedes downward ground-water movement. Water in the shallow aquifer near East Fork Poplar Creek occurs under water-table conditions. Recharge to the shallow aquifer is principally from precipitation, and discharge is through springs and seeps to East Fork Poplar Creek and its tributaries. During spring, summer; and fall, evapotranspiration also accounts for the removal of water in storage in the shallow aquifer. Water levels in the shallow aquifer fluctuate seasonally in response to variations in recharge and evapotranspiration. Generally, the depth to water in the observation wells ranged from about 1 to 4 feet below land surface in late winter, and from about 2 to 7 feet below land surface in late fall. During extremely dry periods, the water table recedes below the top of bedrock in some flood-plain areas, possibly causing East Fork Poplar Creek to lose water to the shallow aquifer along some reaches. Contaminants found in water samples collected from several of the observation wells in concentrations (total and (or) total-recoverable) which equaled or exceeded drinking-water standards established by the U.S. Environmental Protection Agency are antimony, chromium, lead, mercury, selenium, total phenols, and strontium-90. Total and dissolved uranium concentrations exceeded 1.0 microgram per liter in samples from nearly 70 percent of the wells in the East Fork Poplar Creek flood plain. Organic compounds that were identified in low concentrations in samples from a few wells in the flood plain are: Arochlor 1260, benzo(a)anthracene, benzo(b)fluoranthene, chrysene, 3,3-dichlorobenzidine, di-n-butylphthalate, N-nitrosodiphenylamine, and pyrene. Water from one well in the East Fork Poplar Creek flood plain at a contaminated fill site contained 37and 8 micrograms per liter of trichloroethene and trans-1,2-dichloroethene, respectively. Comparison of the results of total and (or) total-recoverable trace-metal determinations with those from dissolved determinations demonstrates that elevated concentrations of these substances in water collected from several of the wells in the East Fork Poplar Creek flood plain resulted from sorption of trace metals (and possibly organic compounds and radionuclides) by fine sediment suspended in the samples. The occurrence of contaminated sediment in these samples is suspected to be the result of borehole contamination during well installation.

Tennessee↗
USGS2025

A glimpse into the future of tectonic tremor monitoring

Tectonic tremor is a weak, long-duration seismic signal often observed in subduction zones and on some other plate-bounding faults. Because of tremor's characteristically low amplitude (and low signal-to-noise) and lack of clear phase arrivals, detecting and locating tremor usually requires techniques distinct from those applied to typical earthquakes. Major advances in detection and understanding of tremor have derived in the past from a powerful combination of new data and new analysis techniques. In a recent study, Sagae et al. (2025, https://doi.org/10.1029/2025jb031348 ) exploit that combination again, developing a new machine-learning based workflow and applying it to the S-net cabled seismic network in the Japan trench offshore northern Honshu. Their approach, although complex, succeeds in detecting several times more tremor activity than earlier studies, resulting in new insights and providing a blueprint for similar approaches that could be applied elsewhere. As real-time earthquake monitoring adopts similar tools, it may present an opportunity to bring tremor monitoring into operational workflows. In turn, this could solidify tremor monitoring as a component of future operational earthquake forecasting.

JGR Solid Earth↗
USGS2024

Formation of vertical columnar seismic structures and seafloor depressions by groundwater discharge in the drowned Miami Terrace platform and overlying deep-water carbonates, southeastern Florida

The presence of vertical cross-formational fluid migration passageways within sedimentary basins can profoundly impact aquifer and reservoir fluid-flow and their identification is fundamental to informing management of subsurface fluid resources (groundwater, oil, gas). In an onshore and offshore southeastern part of Florida, 2D/3D seismic-reflection and bathymetry data document ∼153 vertical columnar structures composed of reflection disruptions up to 790 m in the height and averaging 360 m in diameter, and ∼219 subcircular to circular seafloor depressions up to 1334 m wide. Our study focuses on these features found within the offshore shallow-marine carbonate Miami Terrace platform, which drowned approximately at the end of the middle Miocene, and within overlying Plio-Quaternary deep-water carbonate slope and drift deposits. Most columnar structures are rooted in stratiform aquifers of the Miami Terrace platform and associated with faults or fault intersections produced by Eocene and circa late Miocene tectonics. The columns commonly terminate within the platform or as subcircular depressions along an amalgamated karstic and drowning unconformity at the platform top. The columns typically stretch upwards from a zone of deep karst cavity collapse through the Miami Terrace platform with upward decreasing sag on internal reflections. Following drowning and Plio-Quaternary partial burial of the Miami Terrace platform by deep-water deposits, the subcircular depressions and faults along the platform top were points of origin for a second phase of column growth upward into the deep-water deposits. The continuation of deep platform cavity collapse and column evolution produced pockmarks along paleo-seafloors within the deep-water deposits and at the present-day sea floor. The Plio-Quaternary pockmarks formed at water depths too deep to suggest an origin related to meteoric karst above or near sea level, but rather their formation is suggested to be related to cyclic sea level falls that drove increased groundwater head and density gradients, and seafloor discharge of offshore freshened groundwater sourced from the underlying platform. Plausibly, mixing of freshened groundwater and seawater at the seafloor discharge sites drove dissolution of the host deep-water deposits, which together with erosion by groundwater venting and current scouring formed the pockmarks. Seaward of the Plio-Quaternary seafloor pockmarks, at the late-middle Miocene upper slope of the Miami Terrace platform and along the regional karst/drowning unconformity is a slope-parallel band of ∼189 densely distributed subcircular seafloor depressions with diameters up to 1334 m at water depths up to ∼660 m. It is plausible that along the upper slope, faults and fractures produced by gravity-driven slope instability and possibly tectonics formed a dense network of fluid passageways that promoted upward artesian freshened groundwater flow to sites of discharge where mixing with seawater generated limestone dissolution and the depressions. But tectonic uplift may have forced emersion and initial meteoric sinkhole formation circa late Miocene with later enhancement by freshened groundwater discharge and bottom current erosion.

Florida↗
USGS2026

Low-frequency earthquakes track the motion of a captured slab fragment

Accurate tectonic models are essential for assessing seismic hazard and fault interactions. However, the plate configuration at the complex Mendocino triple junction, where the San Andreas Fault and the Cascadia subduction zone meet, remains uncertain. We analyzed fault slip associated with a recently identified zone of tectonic tremor and low-frequency earthquakes (LFEs) near the southern edge of the subducting Gorda slab. Based on tidal sensitivity and P-wave first motions, we show that the LFEs are generated by dipping, strike-slip motion. This suggests that a former Farallon slab fragment, now captured by the Pacific plate, is translating northward beneath westernmost North America. This geometry effectively extends the slab interface fault, challenging prevailing interpretations of slab window formation and creating a potential unaccounted earthquake hazard in this region.

Science↗
USGS2026

The role of groundwater in contributing to surface water salinization in the Upper Colorado River Basin

Freshwater salinization impacts the availability of water for human use and ecosystem needs worldwide. It has been estimated that total dissolved solids (TDS) in the Colorado River Basin cause $350 million/year in damages and substantial resources are devoted to reducing TDS loading to streams. This study describes the development and application of coupled watershed models that enable TDS source tracking through the subsurface and across the landscape at a seasonal timestep for 35 years in the Upper Colorado River Basin. Results indicate that, on average, 75% of TDS loading to streams originates as baseflow, and 50% of loading is lagged in delivery by longer than one season. Snowmelt was identified as a dominant process controlling the transport of lagged TDS to streams. This approach informs when and where TDS mitigation efforts may be effective in a watershed that serves as a critical water supply for the southwestern United States.

Arizona, Colorado, New Mexico, Utah, Wyoming↗
USGS2024

Compositional and structural mapping of Northwest Africa 15507 angrite

Angrite meteorites represent interesting sampling of planetary crustal environments. Quench-textured angrites with strong crystal zoning originated from the shallow surface region, with evidence of reducing conditions during solidification. Plutonic angrites have more coarse-grained igneous and metamorphic textures with comparatively less zoning and are interpreted as having equilibrated at greater depth. Plutonic angrites contain the minerals magnetite Fe 3 O 4 comprised of Fe 2+ and Fe 3+ , and rhönite, where Fe 3+ is required by inspection of mineral stoichiometry. NWA 15507 is a plutonic angrite with a microgabbroic texture (mean grainsize ∼1.4 mm) composed of zoned Al-Ti-augite, Ca-bearing olivine, anorthite, with accessory kirschsteinite, rhönite, hercynite, low-Ni kamacite, merrillite, Ti-free magnetite and troilite [ 1 ]. Rhönite analyzed by electron-probe microanalysis (EPMA) has the formula Ca 2.04 (Mg 0.32 Fe 2+ 4.25 Fe 3+ 0.47 Ti 0.33 Al 0.61 )(Si 3.74 Al 2.26 )O 20 , where Fe 3+ was estimated by stoichiometric analysis. During preliminary cathodoluminescence (CL) analysis, complex subgrain and oscillatory zoning was observed in the anorthite. In this study we use a combined approach of electron probe microanalysis (EPMA), cathodoluminescence (CL), electron-backscatter diffraction (EBSD), and laser ablation inductively-coupled plasma mass spectrometry (LA-ICP-MS) to further investigate the anorthite and distribution of Fe 3+ in NWA 15507.

Microscopy and Microanalysis↗
USGS2025

The impact of 3D structure on coseismic coastal land-level change and tsunami generation in the Cascadia Subduction Zone

Estimates of coseismic vertical displacements from past and potential future subduction zone earthquakes provide critical constraints on regional seismic and tsunami hazard. Many studies use elastic homogeneous half-space models to calculate vertical displacements from a specified earthquake slip distribution, neglecting complexities of 3D structure in subduction zone settings. Here, we use 3D ground motion simulations of potential Cascadia Subduction Zone earthquakes to investigate the impact of realistic 3D Earth structure on estimated vertical displacements. We show that offshore uplift increases when including 3D structure due to high fault slip in low-rigidity accretionary wedge sediments and coastal subsidence decreases due to higher rigidity material at depth. These larger offshore uplifts cause increased tsunami maximum wave heights, and coastal subsidence at paleoseismic sites decreases on average by ∼17 cm, or ∼60%, which can have important implications for the amplitude and extent of slip in earthquake scenarios developed based on paleoseismic data constraints.

California, Oregon, Washington↗