Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Gas Science and Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,693 records · Page 63Linked to original sources
USGS2026

A practical decision tool for marine bird mortality assessments

Given the rise in anthropogenic, environmental, and disease events contributing to marine bird mortality, there is a critical need to improve the rigor of mortality assessments. Deficits in data collection and mortality estimation can hinder a manager’s ability to document the scale of events and assess population level impacts. Therefore, to inform decisions required during activities, such as conservation status assessments or harvest management, organizations may choose to incorporate mortality assessments into response plans. Resources, capacity, and assets to assess mortality vary across jurisdictions (federal, state, Indigenous, local, etc.), and clear guidance to support mortality assessments is often unavailable or not clearly addressed. Here, we present a decision support tool to help managers identify and evaluate survey options to assess bird mortality in a diverse array of scenarios. The objective of the decision tool is to improve data collection and availability, which will increase the ability to estimate mortality robustly, given situation-specific attributes and constraints. This decision tool is designed to guide the response when a mortality event is initially encountered and offers suggestions for assessment and reporting procedures in the absence of other guidance or to complement existing protocols. The decision tool is also meant to inform decision making for response determination and resource allocation. The tool facilitates examination of options for further assessment and monitoring, which users determine by examining questions pertaining to species prioritization, determination of mortality minimum spatial extent, and the potential magnitude of impacts on affected species. Finally, identification of appropriate survey methods that address imperfect detection when a complete census is not possible are determined by exploring location, spatial and temporal extent, and the type of species affected. Ultimately, this decision tool aims to facilitate and improve the standardization of mortality assessments, equipping managers with a practical resource to navigate the decision-making process for marine bird mortality estimation.

Ornithological Applications↗
USGS2026

Teach me how to pycap: A high-capacity well decision support tool using analytical solutions in Python

Regulatory agencies in humid temperate environments rely on timely evaluations of streamflow depletion and drawdown to protect aquatic ecosystems and existing water users. Numerical models offer detailed insights, but their complexity and time demands often preclude their practical use in rapid decision-making. We present pycap-dss, an open-source Python package that implements a suite of analytical solutions for estimating streamflow depletion and drawdown. The tool supports superposition of multiple wells and time-varying pumping, enabling cumulative impact assessments in situations with multiple wells and streams. The software is modular and extensible, allowing users to interchange solutions or add new analytical methods. A YAML-based configuration supports batch processing of multiple wells, and an optional AnalysisProject class facilitates integration with regulatory workflows. Rigorous unit and regression testing ensures computational reliability, and continuous integration supports ongoing development. We demonstrate deterministic examples of drawdown where multiple solutions are readily compared and streamflow depletion with multiple wells in the Central Sands region of Wisconsin. We also show the value of Monte Carlo analyses of streamflow depletion in the same Central Sands example, leveraging computational efficiency to evaluate the uncertainty of individual and cumulative streamflow depletion calculations from over 200 high-capacity wells.

Wisconsin↗
USGS2025

The GorDAS Distributed Acoustic Sensing experiment above the Cascadia locked zone and subducted Gorda Slab

The southernmost portion of the Cascadia Subduction zone in Northern California produces high rates of moderate and large earthquakes owing to subduction of the Gorda slab and deformation associated with the Mendocino Triple Junction. Distributed Acoustic Sensing (DAS) is rapidly advancing as a method for detecting earthquakes and imaging crustal structure. We have begun a long-term DAS monitoring experiment on buried telecom fiber in Arcata, California, with the goal of increasing the available recordings of moderate to large earthquakes as well as imaging seismogenic structures. We have recorded over a year's worth of data, including most aftershocks of the 2022 M w 6.4 Ferndale earthquake, though not the mainshock itself. The dataset includes numerous magnitude 3.5 and larger earthquakes including the 2023/01/01 M w 5.4 Rio Dell earthquake. Here we present initial results comparing an earthquake detection algorithm, run in real-time on the processing unit of the interrogator system, with both the ShakeAlert earthquake early warning system as well as a post-processed earthquake catalog developed with deep-learning phase-picker algorithms. The rapid onboard processing of the detector demonstrates the potential utility of DAS-based edge computing for earthquake early warning. We also verify the quality of the strain waveforms both in terms of peak amplitudes and waveform similarity using about five months of nodal seismometer data. These instruments were deployed roughly every 300 m along the ~15km long cable and validate large variations in peak strain over short distances that are seen in the DAS data. All data from time windows surrounding both the local and teleseismic earthquakes are publicly available, which will improve our understanding of both the performance of DAS systems in moderate earthquakes and earthquake hazards associated with the Gorda subduction zone.

California↗
USGS2026

Detecting snow avalanche activity using infrasound: Hooker Valley, New Zealand

Snow avalanches pose considerable hazards to people and infrastructure in alpine environments. Traditional avalanche monitoring relies on meteorological data and visual observations, which can be limited in scope and timeliness. Infrasound offers a promising complementary monitoring tool by detecting the low-frequency sound waves generated by avalanches. Here, we present infrasound and camera observations during a 50-day field campaign in the Hooker Valley of Aoraki/Mount Cook National Park, New Zealand. Our study detected seven avalanches with the cameras, whereas the infrasound system identified only one of these events, which was the largest and occurred under conditions that likely favoured infrasound propagation. The infrasound system recorded numerous other events not captured by the cameras, indicating the benefit of further investigation to determine their sources. These findings highlight the potential of infrasound technology for detecting avalanches and providing broad spatial coverage, capturing events in areas not monitored by cameras, while also showcasing limitations in infrasound capabilities. The limited detection of smaller avalanches underscores the opportunity for further research to enhance detection capabilities and understand environmental influences such as snow cover and wind noise. Overall, this study emphasises the utility of multidisciplinary monitoring techniques to improve avalanche detection in alpine environments.

Hooker Valley↗
USGS2025

The influence of nodule versus crust morphology on the composition of seamount-hosted ferromanganese minerals

Ferromanganese mineral precipitation in the global oceans is ubiquitous, occurring in the form of both crusts and nodules at a broad range of depths and seafloor terrains. Although ferromanganese crusts and nodules are both composed of ferromanganese minerals, mineralogy and mean element concentrations compiled for regional crust versus nodule occurrences differ. Notably, most published compilations compare nodules from abyssal plain sediments to crusts forming on seamounts, and do not address the question as to whether mineral morphology may affect the composition of crusts and nodules in addition to environmental factors. To address this, we have compiled a dataset of co-located hydrogenetic (seawater sourced) open-ocean ferromanganese crusts and seamount-hosted nodules. The preliminary data presented here support our hypothesis that co-located crusts and nodules exhibit similar compositions, both in terms of their mineralogy and mean element concentrations, as well as overall variance in concentrations for any given element. These data indicate that local processes influence sample-to-sample variation in both crusts and nodules, in contrast to broader ferromanganese variation reported between open-ocean seamounts- hosted crusts and abyssal plain-hosted nodules.

Conference Paper↗
USGS2025

Using hydrogeologic context and water budgets to evaluate the potential for groundwater contributions to contaminants in Lake Superior

This study presents a synthesis of the hydrogeology in the U.S. Lake Superior watershed and the contribution of groundwater to the water budget of the U.S. Lake Superior basin. Much of the shoreline of Lake Superior in Minnesota and Michigan is composed of hydrogeologic units contributing very little direct groundwater discharge to the lake. Groundwater in watersheds adjacent to the lake typically flows in short, local flow systems characterized by thin glacial sediments with active groundwater flow in fractured bedrock within the top 60–90 m below land surface. The complex groundwater system in Wisconsin’s Bayfield Peninsula has the largest groundwater reservoir near the lake, characterized by thick sand and gravel glacial deposits and underlying sandstone aquifer. Although these thick sandy glacial deposits are not in direct contact with the lake at the shoreline, groundwater discharge may still be significant via subsurface exposures beyond the shoreline or flow through the underlying sandstone aquifer. Overall, most groundwater in the watershed is contributed as indirect base flow in streams around the lakeshore and comprises about 60 percent of the upland water budget. Direct groundwater flow to the shoreline contributes 2 to 9 percent of the inflow. Identifying possible contamination sources through direct sampling of groundwater would be an inefficient way to detect problems if sources are unknown, particularly for some chemicals of concern such as PFAS, pesticides, PCBs, chloride, and nutrients. Evaluating the chemical characteristics of contamination is also important to consider in evaluating how groundwater may contribute to pollution in Lake Superior.

Lake Superior↗
USGS2026

Rapid earthquake magnitude classification via P-wave strains from borehole strainmeters and Distributed Acoustic Sensing

Distributed Acoustic Sensing (DAS) offers a promising approach for earthquake early warning (EEW) in settings where seismic networks are costly to maintain. By repurposing fiber-optic cables as dense strainmeter arrays, DAS enables real-time earthquake detection wherever those fibers are accessible. However, poor azimuthal coverage and challenges in estimating magnitude from strain measurements remain key hurdles in applying for earthquake monitoring. Here, we develop a machine learning method to distinguish large (M≥5.4) earthquakes from smaller ones within the first 4 seconds of a strain waveform after a P-wave arrival without determining location. Using ensemble decision tree models trained on borehole strainmeter data (3.5≤M≤7.1) and tested on onshore DAS waveforms (including the 2024 M7 Offshore Cape Mendocino earthquake), we find that low-frequency (0.2–0.5 Hz) continuous wavelet transform coefficients are the strongest predictors of magnitude, in addition to strain amplitude. Both DAS and borehole strainmeters effectively capture long-period strain signals, making these findings valuable for EEW systems. Our method shows high precision compared to the real-time EEW system, ShakeAlert®, supporting the position that DAS is a viable technology for earthquake monitoring and magnitude classification.

California↗
USGS2025

Chemical and isotopic fractionation during melt inclusion formation

Melt inclusions are used to study the origin and evolution of magmas. The extent to which they represent equilibrium melt compositions, however, critically hinges on the ratio of crystal growth rate to diffusion rate in melts. If the rate of crystal growth is limited by the supply of nutrients and the dissipation of unwanted components, the trapped melt will be depleted in compatible elements and enriched in incompatible elements. Despite widespread recognition of the potential for melt inclusions to trap disequilibrium compositions, their identification remains a challenge. Here, we demonstrate how stable isotopes provide a solution to this problem. Melt inclusions in basaltic tephra from Kīlauea volcano, Hawai‘i, display Mg isotope fractionation up to 0.49‰ ( 26 Mg/ 24 Mg) relative to bulk rock. These observations indicate that kinetic processes, such as chemical diffusion, are at play, as equilibrium mineral-melt isotope fractionation at high temperatures is an order of magnitude smaller. We propose that the heavy Mg isotopic compositions of the melt inclusions were generated by the faster diffusion and thus preferential incorporation of 24 Mg by the growing olivine, leaving the slower diffusant ( 26 Mg) behind. The incompatible elements (e.g., Ca, Ti, and K) are predicted to display similarly large fractionations when boundary layer effects are significant. These findings show that stable isotopes can be a useful tool in identifying disequilibrium compositions in melt inclusions.

Geology↗
USGS2025

Analysis of aquifer framework and properties, Alvahs Lane well field, Cutchogue, New York

The U.S. Geological Survey, in cooperation with the Suffolk County Water Authority, evaluated the aquifer transmissivity and storage properties at the Alvahs Lane well field north of the village of Cutchogue, New York. This analysis of aquifer properties provides the Suffolk County Water Authority with hydrogeologic information needed to develop water supplies to meet the increasing water demands of the residents of Suffolk County, New York. An aquifer test was conducted at the Alvahs Lane well field from October 18 through October 21, 2022, when a production well was pumped at 550 gallons per minute for about 24 hours, and groundwater-level drawdown and recovery were measured in two monitoring wells. The three wells are screened in a glaciofluvial aquifer under unconfined (water table) conditions. Drawdown and recovery data were analyzed with an analytical solution for partial penetration and delayed yield in an unconfined aquifer to provide estimates of the glaciofluvial aquifer properties. Inclusion of lateral aquifer boundaries was not necessary for the analysis to result in satisfactory matches with the observed water-level responses. Aquifer transmissivity was estimated at 32,000 feet squared per day. Assuming a saturated aquifer thickness of 120 feet, this result is equivalent to a horizontal hydraulic conductivity value of 270 feet per day. Specific yield was estimated at 0.15 (dimensionless). The estimated properties are consistent with those of a highly transmissive unconfined aquifer.

New York↗
USGS2024

Subducting plate structure and megathrust morphology from deep seismic imaging linked to earthquake rupture segmentation at Cascadia

The origin of rupture segmentation along subduction zone megathrusts and linkages to the structural evolution of the subduction zone are poorly understood. Here, regional-scale seismic imaging of the Cascadia margin is used to characterize the megathrust spanning ~900 km from Vancouver Island to the California border, across the seismogenic zone to a few tens of kilometers from the coast. Discrete domains in lower plate geometry and sediment underthrusting are identified, not evident in prior regional plate models, which align with changes in lithology and structure of the upper plate and interpreted paleo-rupture patches. Strike-slip faults in the lower plate associated with oblique subduction mark boundaries between regions of distinct lower plate geometry. Their formation may be linked to changes in upper plate structure across long-lived upper plate faults. The Juan de Fuca plate is fragmenting within the seismogenic zone at Cascadia as the young plate bends beneath the heterogeneous upper plate resulting in structural domains that coincide with paleo-rupture segmentation.

Oregon, Washington↗
USGS1989

An investigation of shallow ground-water quality near East Fork Poplar Creek, Oak Ridge, Tennessee

Alluvial soils and fill materials in and near the floodplain of East Fork Poplar Creek in Oak Ridge, Tennessee, are contaminated with various trace metals (primarily mercury), organic compounds, and radionuclides that were lost to the stream as a result of past operations at the Y-12 Plant, a nuclear-processing facility located within the U.S. Department of Energy’s Oak Ridge Reservation. Observation wells were installed in the shallow (above bedrock) aquifer in and near the floodplain of East Fork Poplar Creek and water-quality samples were collected to determine if contaminants found in the soils and fill are also present in the shallow ground water. The shallow aquifer in the East Fork Poplar Creek flood plain consists primarily of alluvial silt and clay with lesser amounts of sand and gravel. Thickness of the shallow aquifer ranges from essentially zero to as much as 20 feet. A silty-clay glei horizon is present between the base of the alluvium and the top of bedrock at most flood-plain locations and, where present, likely impedes downward ground-water movement. Water in the shallow aquifer near East Fork Poplar Creek occurs under water-table conditions. Recharge to the shallow aquifer is principally from precipitation, and discharge is through springs and seeps to East Fork Poplar Creek and its tributaries. During spring, summer; and fall, evapotranspiration also accounts for the removal of water in storage in the shallow aquifer. Water levels in the shallow aquifer fluctuate seasonally in response to variations in recharge and evapotranspiration. Generally, the depth to water in the observation wells ranged from about 1 to 4 feet below land surface in late winter, and from about 2 to 7 feet below land surface in late fall. During extremely dry periods, the water table recedes below the top of bedrock in some flood-plain areas, possibly causing East Fork Poplar Creek to lose water to the shallow aquifer along some reaches. Contaminants found in water samples collected from several of the observation wells in concentrations (total and (or) total-recoverable) which equaled or exceeded drinking-water standards established by the U.S. Environmental Protection Agency are antimony, chromium, lead, mercury, selenium, total phenols, and strontium-90. Total and dissolved uranium concentrations exceeded 1.0 microgram per liter in samples from nearly 70 percent of the wells in the East Fork Poplar Creek flood plain. Organic compounds that were identified in low concentrations in samples from a few wells in the flood plain are: Arochlor 1260, benzo(a)anthracene, benzo(b)fluoranthene, chrysene, 3,3-dichlorobenzidine, di-n-butylphthalate, N-nitrosodiphenylamine, and pyrene. Water from one well in the East Fork Poplar Creek flood plain at a contaminated fill site contained 37and 8 micrograms per liter of trichloroethene and trans-1,2-dichloroethene, respectively. Comparison of the results of total and (or) total-recoverable trace-metal determinations with those from dissolved determinations demonstrates that elevated concentrations of these substances in water collected from several of the wells in the East Fork Poplar Creek flood plain resulted from sorption of trace metals (and possibly organic compounds and radionuclides) by fine sediment suspended in the samples. The occurrence of contaminated sediment in these samples is suspected to be the result of borehole contamination during well installation.

Tennessee↗
USGS2025

Systematic approach to prioritize wells for effective groundwater monitoring and management in the Arkansas Headwaters Basin, Colorado, USA

Study region The Arkansas Headwaters Basin, an intermountain basin in the Southern Rocky Mountains of North America. Study focus Our specific focus is choosing a set of wells to support a possible future regional groundwater-surface water model that would support water management. We present a three-step process using multiple criteria to score, predict, and choose prioritized wells that capture the full distribution of data including extremes. The three-step process provides accessible visualizations, fiscally efficient well prioritization, and screening useful for subsequent groundwater modeling. The novelty of the proposed methodology is the systematic approach integrating a scoring and a predictive approach to support a selection path. The systematic approach may be broadly adapted for other basins. New hydrological insights for the region Understanding regional hydrology hinges on efficient collection of hydrologic data that captures the relevant dynamics including extremes. The present study, a case study for a particular basin in the Southern Rocky Mountains, is the first use of a scripted (R software) strategy to select an economical and representative set of monitoring wells. Our findings suggest caution when using proximity as a proxy for correlation, because proximal wells in the same geologic formation and similar depths are not always correlated. In the Arkansas Headwaters Basin, subsurface geology may be less influential on groundwater elevations than broader hydrologic influences, such as regional drought.

Colorado↗
USGS2026

Is satellite-derived bathymetry vertical accuracy dependent on satellite mission and processing method?

This research focusses on three satellite-derived bathymetry methods and optical satellite instruments: (1) a stereo photogrammetry bathymetry module (SaTSeaD) developed for the NASA Ames stereo pipeline open-source software (version 3.6.0) using stereo WorldView data; (2) physics-based radiative transfer equations (PBSDB) using Landsat data; and (3) a modified composite band-ratio method for Sentinel-2 (SatBathy) with an initial simplified calibration, followed by a more rigorous linear regression against in situ bathymetry data. All methods were tested in three different areas with different geological and environmental conditions, Cabo Rojo, Puerto Rico; Key West, Florida; and Cocos Lagoon and Achang Flat Reef Preserve, Guam. It is demonstrated that all satellite derived bathymetry (SDB) methods have increased accuracy when the results are aligned with higher-accuracy ICESat-2 ATL24 track bathymetry data using the iterative closest point (ICP). SDB vertical accuracy depends more on location characteristics than the method or optical satellite instrument used. All error metrics considered (mean absolute error, median absolute deviation, and root mean square error) can be less than 5% of the maximum bathymetry depth penetration for at least one method, although not necessarily for the same method for all sites. The SDB error distribution tends to be bimodal irrespective of method, satellite instrument, alignment, site, or maximum bathymetry depth, leading to the potential ineffectiveness of traditional error metrics, such as the root mean square error. However, our analysis demonstrates that performing detrending where possible can achieve an error distribution as close to normality as possible for which error metrics are more diagnostic.

Florida↗
USGS2025

Young explosive eruptions from the Clear Lake volcanic field

The Clear Lake volcanic field is the northernmost and youngest field in a chain of volcanic fields in and near the California Coast Range mountains. For 2 million years, numerous eruptions have happened around (and through) Clear Lake. The most recent period of activity in the Clear Lake volcanic field probably started around 40,000 years ago and was mainly explosive eruptions concentrated on and near faults in and around the lake. The combination of hot magma and groundwater created explosive releases of hot steam. The craters, called maars, threw out volcanic ash, pumice, and lava fragments, which fell back to the ground and draped the surrounding landscape. The deposits are visible in many places around the southeast end of the lake.

California↗
USGS2025

Preferential groundwater discharges along stream corridors are disregarded sources of greenhouse gases

Groundwater delivery of greenhouse gases (GHGs) to stream banks and riparian areas, before mixing with surface waters, has not been well quantified. We measured preferential groundwater delivery of GHGs to stream banks within three stream reaches, and found that stream banks with discharging groundwater emitted more CO 2 and were sources of N 2 O compared to stream banks without actively discharging groundwater, which emitted less CO 2 and were N 2 O sinks. At one of our stream reaches, groundwater CO 2 and N 2 O concentrations were 1.4–19.2 and 1.1–40.6 times higher than those in surface water, respectively, and groundwater delivery rates of CO 2 and N 2 O were 1.5 and 1.6 times higher than surface water emissions per unit area. On average, 21% (range 0%–100%) of CO 2 and N 2 O were emitted at the stream bank before mixing with surface waters. Preferential groundwater GHG emissions may contribute substantially to stream corridor emissions and may be underestimated when using a channel-centric approach to estimate riverine GHG budgets.

JGR Biogeosciences↗
USGS2025

U.S. Geological Survey Integrated Water Availability Assessment—2010–20

This professional paper is a multichapter report that assesses water availability in the United States for water years 2010–20. This work was conducted as part of the fulfillment of the mandates of Subtitle F of the Omnibus Public Land Management Act of 2009 (Public Law 111-11), also known as the SECURE Water Act. As such, this work examines the spatial and temporal distribution of water quantity and quality in surface water and groundwater, as related to human and ecosystem needs and as affected by human and natural influences. Chapter A introduces the National Integrated Water Availability Assessment and provides important background and definitions for how the report characterizes water availability and its components. Chapter A also presents the key findings of Chapters B–F and thus acts as a summary of the entire report. Chapter B is a national assessment of water supply, which is the quantity of water supplied through climatic inputs. Chapter C is a national assessment of water quality, which is the chemical and physical characteristics of water. Chapter D assesses water use including withdrawals and consumptive use in the conterminous United States. Chapter E presents an analysis of factors affecting future water availability under changing climate conditions. The National Integrated Water Availability Assessment culminates with Chapter F, which is an integrated assessment of water availability that considers the amount and quality of water coupled with the suitability of that water for specific uses. Together, these six chapters constitute the National Integrated Water Availability Assessment for water years 2010–20.

Professional Paper↗
USGS2025

Widespread occurrence of former anhydrite phenocrysts in Laramide-age magmas related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, USA

Reports of magmatic anhydrite are relatively rare, with only ~30 occurrences documented worldwide so far. However, magmatic anhydrite saturation is difficult to recognize because anhydrite decomposes rapidly in near-surface environments. In most cases, only anhydrite inclusions shielded within other phenocryst phases were able to survive. Alternatively, since anhydrite phenocrysts preserved in fresh volcanic rocks are characteristically intergrown with apatite phenocrysts, the former presence of anhydrite phenocrysts can be recognized based on the occurrence of lath-shaped cavities that show a strong spatial association with apatite phenocrysts. These cavities can be either empty or filled with low-temperature, secondary minerals such as zeolites, carbonates, or microcrystalline silica. A systematic search for the occurrence of such cavities, combined with optical and Raman-spectroscopic identification of anhydrite inclusions preserved within apatite, hornblende and quartz phenocrysts, demonstrates that most of the Laramide-age magmas associated with the Santa Rita and Hanover-Fierro porphyry-skarn Cu (Zn, Mo, Au, Pb) deposits were saturated in magmatic anhydrite. The anhydrite typically coexisted with monosulfide solid solution (MSS), suggesting oxygen fugacities of ~2.0±0.5 log units above the fayalite-magnetite-quartz buffer. The magmas range from andesitic to rhyodacitic in composition, and from shortly pre-mineralization (~61 Ma) to shortly post-mineralization (~57 Ma) in age. In three samples with particularly well-recognizable former anhydrite phenocrysts, their modal abundance could be quantified based on high-resolution scans of polished hand specimens. The observed modal anhydrite abundances of 0.63–1.8 vol% translate into minimum magma sulfur contents of 0.20–0.56 wt% S. The highest sulfur content of 0.56 wt% S is difficult to reconcile with available anhydrite solubility models, but it could be reproduced in an anhydrite solubility experiment performed at 950 °C and 1.15 GPa on a natural latite containing 13.1 wt% dissolved H2O. The sample with the second-highest sulfur content of 0.26 wt% S requires ~10 wt% H2O in the silicate melt, and, consequently, a minimum pressure of ~0.5 GPa. Taken together, the results suggest that the magmas of the Central Mining District were extremely hydrous and thus originated from great depth. Indeed, their major element compositions and reconstructed H2O and S contents agree well with experimentally observed and numerically predicted compositions of residual silicate melts after 50–70 wt% crystallization of ordinary arc basalts at high pressure and high oxygen fugacities.

New Mexico↗
USGS2024

Estimating groundwater level records using MOVE.1 and computing monthly percentiles from estimated groundwater records in Massachusetts

The U.S. Geological Survey, in cooperation with the Massachusetts Department of Environmental Protection, performed record extensions on groundwater levels at select wells using the Maintenance of Variance Extension type 1 (MOVE.1) method. The groundwater levels estimated from these record extensions were used to compute monthly percentiles to improve future determinations of a groundwater index. In Massachusetts, 27 of 29 short-record study wells with continuous groundwater levels between 0.8 and 8.1 years were suitable for record extensions; 37 long-record index wells were used to extend the groundwater level records at the study wells. The index well selected to pair with a study well was chosen based on Pearson correlation coefficient values; cross-correlation between the two wells; geologic and topographic similarity; and smallest distance spanning the wells. Each study well and its corresponding index well have 1 or more years of concurrent, overlapping data; a Pearson correlation coefficient that exceeded a threshold value of 0.8; and a similar aquifer type and hydrologic characteristics. Of the 29 study wells, 2 showed poor correlations with all index wells and were not considered for record extensions. Performance metrics used to assess the accuracy of the MOVE.1 models indicated that most models provided reasonable estimates of groundwater levels. Root mean square error values ranged from 0.097 to 2.292 feet, with a median of 0.536 foot. Nash-Sutcliffe efficiency coefficient values ranged from 0.623 to 0.996, with a median value of 0.759. Generally, study wells in close geographical proximity to their index well resulted in stronger model performance. The average length of groundwater level records was extended by 14.1 years to a new average of 18.1 years. The estimated groundwater level records from the MOVE.1 models resulted in an increase in the range of highest and lowest groundwater levels at 23 of 27 wells. The increase in range of groundwater levels was between 0.08 to 7.95 feet. Monthly percentiles for State drought indices were computed from the estimated MOVE.1 records and observed records through December 31, 2021. Percentiles computed from estimated records show an average groundwater level about 1.0 foot lower than observed data at the 2d percentile and 0.1 foot lower at the 30th percentile.

Massachusetts↗