Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “One Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62Linked to original sources
USGS2021

Hydrogeomorphic recovery and temporal changes in rainfall thresholds for debris flows following wildfire

Wildfire-induced changes to soil and vegetation promote runoff-generated debris flows in steep watersheds. Postfire debris flows are most commonly observed in steep watersheds during the first wet season following a wildfire, but it is unclear how long the elevated threat of debris flow persists and why debris-flow potential changes in recovering burned areas. This work quantifies how rainfall intensity-duration (ID) thresholds for debris-flow initiation change with time since burning and provides a mechanistic explanation for these changes. We constrained a hydrologic model using field and remotely sensed measurements of soil-infiltration capacity, vegetation cover, runoff, and debris-flow activity. We applied this model to estimate rainfall ID thresholds for debris-flow initiation within three burned areas in the southwestern United States over a postfire recovery period of three to four years. Modeling suggests ID thresholds are lowest immediately following the fire (below a one-year recurrence interval [RI] storm) and increase with time, such that a 10- to 25-year RI storm would be required to generate a debris flow after three years of recovery. Modeled changes in rainfall ID thresholds result from increases in soil infiltration capacity, canopy interception, hydraulic roughness, and median grain size of sediment entrained in an incipient debris flow. The relative importance of each of these factors varied among our three sites. Results improve our ability to assess temporal changes in postfire debris-flow potential, highlight how site-specific factors may alter the persistence of postfire debris-flow hazards, and provide additional constraints on the timescale of recovery following wildfire.

Arizona, California, New Mexico↗
USGS2012

Application of continuum models to deformation of the Aleutian Island Arc

Continuum models were constructed to describe large‐scale deformation of the Aleutian Island Arc over the past 5 m.y. These models consider the island arc as a continuum in the horizontal plane with the velocity boundary condition at the Pacific edge stated as a fraction of Pacific plate convergence transferred to the arc. First, a simple model of uniformly distributed strain is formulated to illustrate the mechanics of continuous deformation. Lineaments along the arc massif rotated about a vertical axis are matched by small‐element rotation calculated from the model. However, this model does not predict across‐arc variations in deformation and produces an unrealistic amount of crustal thickening after 5 m.y. A physically more meaningful model of deformation is the thin viscous sheet model based on averages of stress and rheology throughout the lithosphere. The amount of motion transferred from the Pacific plate to the arc is constrained by the rotated lineaments, while the effective stress‐strain exponent ( n ) and the ability the lithosphere has to sustain crustal thickness contrasts (the Argand number) are independent variables. Primarily, bathymetry, earthquake focal mechanisms, and styles of faulting are used to evaluate the models. The preferred model is one where the amount of motion transferred from the Pacific plate is greater in an arc‐parallel direction than in an arc‐normal direction, producing stresses consistent with strike‐slip faulting at the far western end of the arc and tensional stresses consistent with transverse normal faulting elsewhere in the arc massif. This model agrees with observations of slip vectors by Ekström and Engdahl (1989), who conclude that a portion of the arc‐parallel component of relative plate motion is taken up in the overriding plate. This model implies that compressive stress transferred to the arc is small in comparison to along‐arc shear stress and that stresses conducive to strikeslip faulting are prevalent throughout the arc.

Alaska↗
USGS2013

Topological and canonical kriging for design flood prediction in ungauged catchments: an improvement over a traditional regional regression approach?

In the United States, estimation of flood frequency quantiles at ungauged locations has been largely based on regional regression techniques that relate measurable catchment descriptors to flood quantiles. More recently, spatial interpolation techniques of point data have been shown to be effective for predicting streamflow statistics (i.e., flood flows and low-flow indices) in ungauged catchments. Literature reports successful applications of two techniques, canonical kriging, CK (or physiographical-space-based interpolation, PSBI), and topological kriging, TK (or top-kriging). CK performs the spatial interpolation of the streamflow statistic of interest in the two-dimensional space of catchment descriptors. TK predicts the streamflow statistic along river networks taking both the catchment area and nested nature of catchments into account. It is of interest to understand how these spatial interpolation methods compare with generalized least squares (GLS) regression, one of the most common approaches to estimate flood quantiles at ungauged locations. By means of a leave-one-out cross-validation procedure, the performance of CK and TK was compared to GLS regression equations developed for the prediction of 10, 50, 100 and 500 yr floods for 61 streamgauges in the southeast United States. TK substantially outperforms GLS and CK for the study area, particularly for large catchments. The performance of TK over GLS highlights an important distinction between the treatments of spatial correlation when using regression-based or spatial interpolation methods to estimate flood quantiles at ungauged locations. The analysis also shows that coupling TK with CK slightly improves the performance of TK; however, the improvement is marginal when compared to the improvement in performance over GLS.

Hydrology and Earth System Sciences↗
USGS2001

A comparison of U.S. geological survey seamless elevation models with shuttle radar topography mission data

Elevation models produced from Shuttle Radar Topography Mission (SRTM) data will be the most comprehensive, consistently processed, highest resolution topographic dataset ever produced for the Earth's land surface. Many applications that currently use elevation data will benefit from the increased availability of data with higher accuracy, quality, and resolution, especially in poorly mapped areas of the globe. SRTM data will be produced as seamless data, thereby avoiding many of the problems inherent in existing multi-source topographic databases. Serving as precursors to SRTM datasets, the U.S. Geological Survey (USGS) has produced and is distributing seamless elevation datasets that facilitate scientific use of elevation data over large areas. GTOPO30 is a global elevation model with a 30 arc-second resolution (approximately 1-kilometer). The National Elevation Dataset (NED) covers the United States at a resolution of 1 arc-second (approximately 30-meters). Due to their seamless format and broad area coverage, both GTOPO30 and NED represent an advance in the usability of elevation data, but each still includes artifacts from the highly variable source data used to produce them. The consistent source data and processing approach for SRTM data will result in elevation products that will be a significant addition to the current availability of seamless datasets, specifically for many areas outside the U.S. One application that demonstrates some advantages that may be realized with SRTM data is delineation of land surface drainage features (watersheds and stream channels). Seamless distribution of elevation data in which a user interactively specifies the area of interest and order parameters via a map server is already being successfully demonstrated with existing USGS datasets. Such an approach for distributing SRTM data is ideal for a dataset that undoubtedly will be of very high interest to the spatial data user community.

Conference Paper↗
USGS2018

The geochemistry of loess: Asian and North American deposits compared

Loess is widely distributed over Asia and North America and constitutes one of the most important surficial deposits that serve as terrestrial records of the Quaternary. The oldest Pleistocene loess in China is likely ∼2.6 Ma, thus spanning much or all of the Pleistocene. In North America, most loess is no older than the penultimate glacial period, with the exception of Alaska, where the record may go back to ∼3.0 Ma. On both continents, loess deposits date primarily to glacial periods, and interglacial or interstadial periods are represented by paleosols. Both glacial and non-glacial sources of silts that comprise the bulk of loess deposits are found on both continents. Although loess has been considered to be representative of the average upper continental crust, there are regionally distinctive compositions of loess in both Asia and North America. Loess deposits in Asia from Yakutia, Tajikistan, and China have compositionally distinct major element compositions, due to varying abundances of silicate minerals, carbonate minerals, and clay minerals. In North America, loess in the Mississippi River valley, the Great Plains, and Alaska are also distinguishable with regard to major element composition that reflects highly diverse source sediments. Trace element geochemistry (Sc-Th-Zr and the rare earth elements) also shows regional diversity of loess bodies, in both Asia and North America. On both continents, most loess bodies show significant contributions from later-cycle, altered sedimentary rocks, as opposed to direct derivation from igneous rocks. Further, some loess bodies have detectable contributions from mafic igneous rocks as well as major contributions from average, upper-crustal, felsic rocks. Intercalated paleosols in loess sections show geochemical compositions that differ significantly from the underlying loess parent materials. Ratios of soluble-to-insoluble elements show depletions in paleosols due to chemical weathering losses of calcite, dolomite, plagioclase, mica, apatite, and smectite. In Asia and North America, the last interglacial paleosol is more weathered than equivalent modern soils, which could be due either to a climate that was warmer and more humid, a longer period of pedogenesis, or both. In Asia, early Pleistocene loess and paleosols are both more weathered than those from the middle and late Pleistocene, forming prior to a mid-Pleistocene aridification of Asia from uplift of the Tibetan Plateau. Understanding the geochemistry of loess and paleosols can tell us much about past atmospheric circulation, past temperature and moisture regimes, and even tectonic processes.

Journal of Asian Earth Sciences↗
USGS2020

Proposed species extinction target fails to capture the diversity in biodiversity

We believe the 20 species extinction metric is a retrograde proposal, which does not adequately consider the lessons learnt from the 2020 Aichi Biodiversity Targets. Whilst having a single simple overarching target is appealing, we believe a positively-framed target will garner support, rather than one that aims to, at best, limit negative impacts. The Convention on Biological Diversity’s zero draft states that future targets should be clear, consistent and SMART (Specific, Measurable, Achievable, Relevant and Timely). Extinction is problematic as a standalone target: it can take decades to demonstrate and therefore cannot be measured over a relevant time-period, and is biased towards terrestrial vertebrates. The proposal is not scalable across nations, nor is it equitable,one of the key aspirations of the zero draft. Many industrialised countries are unlikely to find the targets challenging because their most vulnerable species have largely gone extinct; tropical species-rich countries, where much biodiversity is yet to be catalogued, will find the targets demanding and unachievable in the short- or medium-term. Despite the authors’ statement to the contrary, species extinction is not necessarily relevant to other aspects of biodiversity, such as ecosystems or genetic diversity. A species may be reduced to a small fraction of its former extent without going extinct. However, its ecosystem will be altered, and its contribution to ecosystem functions and the socio-economic benefits it provided will be lost. The focus on extinction is not novel and has not been particularly successful to date, as demonstrated by the decline of emblematic species such as rhinoceroses. Alternatively, composite indicators can be used to capture biodiversity’s three fundamental components (ecosystems, species and genetic diversity). In conclusion, we cannot support a target that fails to represent the diversity in biodiversity and, in the authors’ words, could be met despite “wholesale and damaging changes to life on Earth.”

Science↗
USGS2025

New paleomagnetic constraints on the eruption timing, stratigraphy, and post-emplacement deformation of the Picture Gorge Basalt within the Columbia River Basalt Group

The Picture Gorge Basalt (PGB) is part of the Miocene Columbia River Basalt Group (CRBG). The PGB, which outcrops in eastern Oregon, is considered coincident in time with the voluminous Grande Ronde Basalt. New radiometric ages have expanded the age‐range of the PGB, suggesting it began erupting prior to the Steens Basalt to its south and continued until after cessation of the Grande Ronde Basalt eruptions, an interval of 1.5 Ma. However, the existing paleomagnetism of the PGB implies this eruption timeline is an overestimate. To reconcile the radiometric and paleomagnetic timescales for the PGB, we conducted a paleomagnetic study on sections of the PGB to construct a detailed, high‐quality magnetostratigraphy. Our data indicate the stratigraphically lowest lava flows in the PGB are of reversed polarity, revealing a new paleomagnetic transition with the PGB and a reversed (R)–normal (N)–reversed (R) sequence. This suggests one of two timeline possibilities for PGB volcanism: (a) eruptions began and during through CRBG polarity chrons R0–N0–R1, penecontemporaneous with Steens Basalt, or (b) eruptions began and persisted during CRBG polarity chrons R1–N1–R2. Our work supports a longer interval of PGB volcanism than was suggested by previous paleomagnetic data but is at odds with the suggestion that PGB eruptions lasted through the entire main CRBG. We favor a scenario wherein PGB eruptions begin with R0 and continue into the R1 paleomagnetic interval. The paleomagnetic results also record a ∼18° vertical‐axis rotation of east‐central Oregon after ∼16 Ma with respect to stable North America.

Oregon↗
USGS2015

Critical metals in manganese nodules from the Cook Islands EEZ, abundances and distributions

The Cook Islands (CIs) Exclusive Economic Zone (EEZ) encompasses 1,977,000 km 2 and includes the Penrhyn and Samoa basins abyssal plains where manganese nodules flourish due to the availability of prolific nucleus material, slow sedimentation rates, and strong bottom currents. A group of CIs nodules was analyzed for mineralogical and chemical composition, which include many critical metals not before analyzed for CIs nodules. These nodules have varying sizes and nuclei material; however all are composed predominantly of δ-MnO 2 and X-ray amorphous iron oxyhydroxide. The mineralogy, Fe/Mn ratios, rare earth element contents, and slow growth rates (mean 1.9 mm/10 6 years) reflect formation primarily by hydrogenetic precipitation. The paucity of diagenetic input can be explained by low primary productivity at the surface and resultant low organic matter content in seafloor sediment, producing oxic seafloor and sub-seafloor environments. The nodules contain high mean contents of Co (0.41%), Ni (0.38%), Ti (1.20%), and total rare earth elements plus yttrium (REY; 0.167%), and also high contents of Mo, Nb, V, W, and Zr. Compiled data from a series of four cruises by the Japan International Cooperation Agency and the Mining agency of Japan from 1985 to 2000 were used to generate a map that defines the statistical distribution of nodule abundance throughout the EEZ, except the Manihiki Plateau. The abundance distribution map shows a belt of high nodule abundance (19–45 kg/m 2 ) that starts in the southeast corner of the EEZ, runs northwest, and also bifurcates into a SW trending branch. Small, isolated areas contain abundances of nodules of up to 58 kg/m 2 . Six ~ 20,000 km 2 areas of particularly high abundance were chosen to represent potential exploration areas, and maps for metal concentration were generated to visualize metal distribution and to extrapolate estimated metal tonnages within the six sites and the EEZ as a whole. Grades for Mn, Cu, and Ni are low in CIs nodules in areas of high abundance; however, Ti, Co, and REY show high contents where nodule abundances are high. Of the six areas identified to represent a range of metal contents, one at the northern end of the N-S abundance main belt optimizes the most metals and would yield the highest dry metric tons for Mn (61,002,292), Ni (1,247,834), Mo (186,166), V (356,247), W (30,215), and Zr (195,323). When compared with the Clarion–Clipperton Zone, the CIs nodules show higher nodule abundances (> 25 kg/m 2 over ~ 123,844 km 2 ), and are more enriched in the green-tech, high-tech, and energy metals Co, Ti, Te, Nb, REY, Pt, and Zr. The CIs EEZ shows a significant resource potential for these critical metals due to their high prices, high demand, and the high nodule abundance, which will allow for a smaller footprint for a 20-year mine site and therefore smaller environmental impact.

Ore Geology Reviews↗
USGS1981

Landsat 3 return beam vidicon response artifacts

The return beam vidicon (RBV) sensing systems employed aboard Landsats 1, 2, and 3 have all been similar in that they have utilized vidicon tube cameras. These are not mirror-sweep scanning devices such as the multispectral scanner (MSS) sensors that have also been carried aboard the Landsat satellites. The vidicons operate more like common television cameras, using an electron gun to read images from a photoconductive faceplate. In the case of Landsats 1 and 2, the RBV system consisted of three such vidicons which collected remote sensing data in three distinct spectral bands. Landsat 3, however, utilizes just two vidicon cameras, both of which sense data in a single broad band. The Landsat 3 RBV system additionally has a unique configuration. As arranged, the two cameras can be shuttered alternately, twice each, in the same time it takes for one MSS scene to be acquired. This shuttering sequence results in four RBV "subscenes" for every MSS scene acquired, similar to the four quadrants of a square. See Figure 1. Each subscene represents a ground area of approximately 98 by 98 km. The subscenes are designated A, B, C, and D, for the northwest, northeast, southwest, and southeast quarters of the full scene, respectively. RBV data products are normally ordered, reproduced, and sold on a subscene basis and are in general referred to in this way. Each exposure from the RBV camera system presents an image which is 98 km on a side. When these analog video data are subsequently converted to digital form, the picture element, or pixel, that results is 19 m on a side with an effective resolution element of 30 m. This pixel size is substantially smaller than that obtainable in MSS images (the MSS has an effective resolution element of 73.4 m), and, when RBV images are compared to equivalent MSS images, better resolution in the RBV data is clearly evident. It is for this reason that the RBV system can be a valuable tool for remote sensing of earth resources. Until recently, RBV imagery was processed directly from wideband video tape data onto 70-mm film. This changed in September 1980 when digital production of RBV data at the NASA Goddard Space Flight Center (GSFC) began. The wideband video tape data are now subjected to analog-to-digital preprocessing and corrected both radiometrically and geometrically to produce high-density digital tapes (HDT's). The HDT data are subsequently transmitted via satellite (Domsat) to the EROS Data Center (EDC) where they are used to generate 241-mm photographic images at a scale of 1:500,000. Computer-compatible tapes of the data are also generated as digital products. Of the RBV data acquired since September 1, 1980, approximately 2,800 subscenes per month have been processed at EDC.

Open-File Report↗
USGS2019

Detrital K-feldspar Pb isotopic evaluation of extraregional sediment transported through an Eocene tectonic breach of southern California's Cretaceous batholith

Sedimentary provenance studies have come to be overwhelmingly based upon U–Pb geochronologic measurements performed with detrital zircon while alternative and potentially complementary approaches such as conglomerate clast studies and heavy mineral analysis have faded in importance. Measurement of Pb isotopic compositions in detrital K-feldspar is among the under-utilized approaches available to ascertain sedimentary source regions. While it has been long recognized that common Pb isotope compositions recorded by K-feldspar vary widely and reflect the crustal provinces from which the host basement rocks crystallized, use of the approach has suffered due to a lack of appropriate statistical models and ground truth compositional data from source regions. In this paper, we: (1) present high-throughput LA-ICPMS analysis protocols needed to generate statistically meaningful detrital K-feldspar Pb isotope data sets; (2) develop an interpretative approach based upon 208 Pb/ 206 Pb vs. 207 Pb/ 206 Pb that incorporate information from the U- and Th-decay systems into one two-dimensional plot that is amenable to analysis using two-dimensional Kolmogorov–Smirnoff statistical tests; (3) generate new Pb isotopic data from basement rocks from southwestern North America to improve knowledge of the Pb isotopic properties of potential source regions; and (4) generate new Pb isotopic data from Lower Eocene to Lower Miocene sedimentary rocks to evaluate changes in drainage patterns that occurred in response to deformation that affected the southern California margin. Through this case study, we demonstrate how our new analytical and interpretative methods could be profitably applied to future geochemical and provenance studies and tectonically driven re-organization of drainage patterns.

Earth and Planetary Science Letters↗
USGS2024

Transdisciplinary research supports the sustainability of barrier island systems threatened by climate change

The management of developed barrier islands is often piece-meal and reactionary despite the complex, dynamic nature of these systems, and sustainable practices will become increasingly difficult due to heightened pressures of climate change. Adaptation actions, including nature-based solutions, need to be thoroughly evaluated prior to implementation to understand system-wide impacts and avoid maladaptation. Anarde et al. (2024a), ( https://doi.org/10.1029/2023ef003672 ), Anarde et al. (2024b), ( https://doi.org/10.1029/2023ef004200 ) is the latest important contribution in a growing body of transdisciplinary research that more robustly evaluates the complex physical process-and-response relationship of barrier systems via sophisticated numerical modeling approaches that also interface with socioeconomic models to inform coastal management actions in response to mitigating coastal risk. This new research indicates the importance of coordinated system-scale barrier island management, as strategies to reduce coastal hazard risk in one location will directly affect adjacent communities. Further, this work demonstrates that reducing barrier management interventions may actually promote barrier recovery and sustainability in the face of sea level rise. In addition, recent advances in the analysis and application of remotely sensed data from satellites and oblique aerial photography provide scientists an unprecedented opportunity to track coastal evolution over a wide range of spatial and temporal scales at minimal cost. As sea level rise and changing storm patterns challenge the sustainable management of barrier island systems, integrating these advanced, transdisciplinary tools will enable scientists and coastal practitioners to more thoroughly evaluate coastal adaptation options, efficiently invest limited resources to mitigate coastal hazard risk for communities, support healthy ecosystems, and reduce system-wide impacts.

Earth's Future↗
USGS1997

Occurrence and significance of Silurian K-bentonite beds at Arisaig, Nova Scotia, eastern Canada

The most extensive succession of K-bentonite beds known in the Silurian of North America occurs at Arisaig on the northern coast of Nova Scotia. At least 40 ash beds are present in the Llandoverian Ross Brook Formation and at least four in the early Ludlovian McAdam Brook Formation. Most of the beds are thin (< 5 cm), but one bed (the Smith Brook K-bentonite bed) in the late Llandoverian crenulata Zone and another (the McAdam Brook K-bentonite bed) in the early Ludlovian nilssoni Zone each reach a thickness of 20 cm. New graptolite collections provide critical information on the biostratigraphic position of the K-bentonite beds in the Ross Brook Formation. Geochemical data show that the Arisaig ash beds represent calc-alkaline magmas from plate margin, subduction-related volcanic vents. Differences in K-bentonite stratigraphic distribution, combined with paleogeographic considerations, suggest that the volcanoes were located much farther to the south in the Iapetus than the source volcanoes of the British–Baltoscandian Llandoverian K-bentonites.

Nova Scotia↗
USGS2011

Hydrologic effects of urbanization and climate change on the Flint River Basin, Georgia

The potential effects of long-term urbanization and climate change on the freshwater resources of the Flint River basin were examined by using the Precipitation-Runoff Modeling System (PRMS). PRMS is a deterministic, distributed-parameter watershed model developed to evaluate the effects of various combinations of precipitation, temperature, and land cover on streamflow and multiple intermediate hydrologic states. Precipitation and temperature output from five general circulation models (GCMs) using one current and three future climate-change scenarios were statistically downscaled for input into PRMS. Projections of urbanization through 2050 derived for the Flint River basin by the Forecasting Scenarios of Future Land-Cover (FORE-SCE) land-cover change model were also used as input to PRMS. Comparison of the central tendency of streamflow simulated based on the three climate-change scenarios showed a slight decrease in overall streamflow relative to simulations under current conditions, mostly caused by decreases in the surface- runoff and groundwater components. The addition of information about forecasted urbanization of land surfaces to the hydrologic simulation mitigated the decreases in streamflow, mainly by increasing surface runoff.

Georgia↗
USGS2003

Preliminary northeast Asia geodynamics map

This map portrays the geodynamics of Northeast Asia at a scale of 1:5,000,000 using the concepts of plate tectonics and analysis of terranes and overlap assemblages. The map is the result of a detailed compilation and synthesis at 5 million scale and is part of a major international collaborative study of the Mineral Resources, Metallogenesis, and Tectonics of Northeast Asia conducted from 1997 through 2002 by geologists from earth science agencies and universities in Russia, Mongolia, Northeastern China, South Korea, Japan, and the USA. This map is the result of extensive geologic mapping and associated tectonic studies in Northeast Asia in the last few decades and is the first collaborative compilation of the geology of the region at a scale of 1:5,000,000 by geologists from Russia, Mongolia, Northeastern China, South Korea, Japan, and the USA. The map was compiled by a large group of international geologists using the below concepts and definitions during collaborative workshops over a six-year period. The map is a major new compilation and re-interpretation of pre-existing geologic maps of the region. The map is designed to be used for several purposes, including regional tectonic analyses, mineral resource and metallogenic analysis, petroleum resource analysis, neotectonic analysis, and analysis of seismic hazards and volcanic hazards. The map consists of two sheets. Sheet 1 displays the map at a scale of 1:5,000,000, explanation. Sheet 2 displays the introduction, list of map units, and source references. Detailed descriptions of map units and stratigraphic columns are being published separately. This map is one of a series of publications on the mineral resources, metallogenesis, and geodynamics,of Northeast Asia. Companion studies and other articles and maps , and various detailed reports are: (1) a compilation of major mineral deposit models (Rodionov and Nokleberg, 2000; Rodionov and others, 2000; Obolenskiy and others, in press a); (2) a series of metallogenic belt maps (Obolenskiy and others, 2001; in press b); (3) a lode mineral deposits and placer districts location map for Northeast Asia (Ariunbileg and others, in press b); (4) descriptions of metallogenic belts (Rodionov and others, in press); and (5) a database on significant metalliferous and selected nonmetalliferous lode deposits, and selected placer districts (Ariunbileg and others, in press a).

Open-File Report↗
USGS2012

A unifying model for planform straightness of ripples and dunes in air and water

Geologists, physicists, and mathematicians have studied ripples and dunes for more than a century, but despite considerable effort, no general model has been proposed to explain perhaps the most fundamental property of their morphology: why are some bedforms straight, continuous, parallel, and uniform in planform geometry (i.e. two-dimensional) whereas others are irregular (three-dimensional)? Here we argue that physical coupling along the crest of a bedform is required to produce straight crests and that along-crest flow and sand transport provide effective physical mechanisms for that coupling. Ripples and dunes with the straightest and most continuous crests include longitudinal and oblique dunes in unidirectional flows, wave ripples, dunes in reversing flows, wind ripples, and ripples migrating along a slope. At first glance, these bedforms appear quite different (ripples and dunes; air and water; transverse, oblique, and longitudinal orientations relative to the net sand-transport direction), but they all have one property in common: a process that increases the amount of along-crest sand transport (that lengthens and straightens their crests) relative to the across-crest transport (that makes them migrate and take the more typical and more three-dimensional planform geometry). In unidirectional flows that produce straight bedforms, along-crest transport of sand is caused by along-crest flow (non-transverse bedform orientation), gravitational transport along an inclined crest, or ballistic splash in air. Bedforms in reversing flows tend to be straighter than their unidirectional counterparts, because reverse transport across the bedform crest reduces the net across-crest transport (that causes the more typical irregular geometry) relative to the along-crest transport (that smoothes and straightens planform geometry).

Earth-Science Reviews↗
USGS2010

The North American upper mantle: Density, composition, and evolution

The upper mantle of North America has been well studied using various seismic methods. Here we investigate the density structure of the North American (NA) upper mantle based on the integrative use of the gravity field and seismic data. The basis of our study is the removal of the gravitational effect of the crust to determine the mantle gravity anomalies. The effect of the crust is removed in three steps by subtracting the gravitational contributions of (1) topography and bathymetry, (2) low-density sedimentary accumulations, and (3) the three-dimensional density structure of the crystalline crust as determined by seismic observations. Information regarding sedimentary accumulations, including thickness and density, are taken from published maps and summaries of borehole measurements of densities; the seismic structure of the crust is based on a recent compilation, with layer densities estimated from P-wave velocities. The resultant mantle gravity anomaly map shows a pronounced negative anomaly (−50 to −400 mGal) beneath western North America and the adjacent oceanic region and positive anomalies (+50 to +350 mGal) east of the NA Cordillera. This pattern reflects the well-known division of North America into the stable eastern region and the tectonically active western region. The close correlation of large-scale features of the mantle anomaly map with those of the topographic map indicates that a significant amount of the topographic uplift in western NA is due to buoyancy in the hot upper mantle, a conclusion supported by previous investigations. To separate the contributions of mantle temperature anomalies from mantle compositional anomalies, we apply an additional correction to the mantle anomaly map for the thermal structure of the uppermost mantle. The thermal model is based on the conversion of seismic shear-wave velocities to temperature and is consistent with mantle temperatures that are independently estimated from heat flow and heat production data. The thermally corrected mantle density map reveals density anomalies that are chiefly due to compositional variations. These compositional density anomalies cause gravitational anomalies that reach ~250 mGal. A pronounced negative anomaly (−50 to −200 mGal) is found over the Canadian shield, which is consistent with chemical depletion and a corresponding low density of the lithospheric mantle, also referred to as the mantle tectosphere. The strongest positive anomaly is coincident with the Gulf of Mexico and indicates a positive density anomaly in the upper mantle, possibly an eclogite layer that has caused subsidence in the Gulf. Two linear positive anomalies are also seen south of 40°N: one with a NE-SW trend in the eastern United States, roughly coincident with the Grenville-Appalachians, and a second with a NW-SE trend beneath the states of Texas, New Mexico, and Colorado. These anomalies are interpreted as being due to (1) the presence of remnants of an oceanic slab in the upper mantle beneath the Grenville-Appalachian suture and (2) mantle thickening caused by a period of shallow, flat subduction during the Laramie orogeny, respectively. Based on these geophysical results, the evolution of the NA upper mantle is depicted in a series of maps and cartoons that display the primary processes that have formed and modified the NA crust and lithospheric upper mantle.

Journal of Geophysical Research B: Solid Earth↗
USGS2001

Finding Your Way with Map and Compass

A topographic map tells you where things are and how to get to them, whether you're hiking, biking, hunting, fishing, or just interested in the world around you. These maps describe the shape of the land. They define and locate natural and manmade features like woodlands, waterways, important buildings, and bridges. They show the distance between any two places, and they also show the direction from one point to another. Distances and directions take a bit of figuring, but the topography and features of the land are easy to determine. The topography is shown by contours. These are imaginary lines that follow the ground surface at a constant elevation; they are usually printed in brown, in two thicknesses. The heavier lines are called index contours, and they are usually marked with numbers that give the height in feet or meters. The contour interval, a set difference in elevation between the brown lines, varies from map to map; its value is given in the margin of each map. Contour lines that are close together represent steep slopes. Natural and manmade features are represented by colored areas and by a set of standard symbols on all U.S. Geological Survey (USGS) topographic maps. Woodlands, for instance, are shown in a green tint; waterways, in blue. Buildings may be shown on the map as black squares or outlines. Recent changes in an area may be shown by a purple overprint. A road may be printed in red or black solid or dashed lines, depending on its size and surface. A list of symbols is available from the Earth Science Information Center (ESIC).

Fact Sheet↗
USGS2000

Finding your way with map and compass

A topographic map tells you where things are and how to get to them, whether you're hiking, biking, hunting, fishing, or just interested in the world around you. These maps describe the shape of the land. They define and locate natural and manmade features like woodlands, waterways, important buildings, and bridges. They show the distance between any two places, and they also show the direction from one point to another. Distances and directions take a bit of figuring, but the topography and features of the land are easy to determine. The topography is shown by contours. These are imaginary lines that follow the ground surface at a constant elevation; they are usually printed in brown, in two thicknesses. The heavier lines are called index contours, and they are usually marked with numbers that give the height in feet or meters. The contour interval, a set difference in elevation between the brown lines, varies from map to map; its value is given in the margin of each map. Contour lines that are close together represent steep slopes. Natural and manmade features are represented by colored areas and by a set of standard symbols on all U.S . Geological Survey (USGS) topographic maps. Woodlands, for instance, are shown in a green tint; waterways, in blue. Buildings may be shown on the map as black squares or outlines. Recent changes in an area may be shown by a purple overprint. A road may be printed in red or black solid or dashed lines, depending on its size and surface. A list of symbols is available from the Earth Science Information Center (ESIC).

Fact Sheet↗