Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Environmental Science and Technology - Water”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,666 records · Page 62Linked to original sources
USGS2024

Bathymetric and velocimetric surveys at highway bridges crossing the Missouri and Mississippi Rivers on the periphery of Missouri, June 13–22, 2022

Bathymetric and velocimetric data were collected by the U.S. Geological Survey, in cooperation with the Missouri Department of Transportation, near seven bridges at six highway crossings of the Missouri and Mississippi Rivers on the periphery of Missouri from June 13–22, 2022. A multibeam echosounder mapping system was used to obtain channel-bed elevations for river reaches about 1,640 feet longitudinally and generally extending laterally across the active channel from bank to bank during minor flood-flow conditions. These surveys provided channel geometry and hydraulic conditions at the time of the surveys and provided characteristics of scour holes that may be useful in developing or verifying predictive guidelines or equations for computing potential scour depth. These data also may be useful to the Missouri Department of Transportation as a minor flood-flow assessment of the bridges for stability and integrity issues with respect to bridge scour during floods. Bathymetric data were collected around every in-channel pier. Scour holes were present at most piers for which bathymetry could be obtained, except those on banks or surrounded by riprap. Occasionally, scour holes were minor and difficult to discern from nearby dunes and ripples. All bridge sites in this study were surveyed and documented in previous studies. Although partial exposure of substructural support elements was observed at several piers, at most sites the exposure most likely is minimal compared to the overall substructure that remains buried in bed material at these piers. The notable exceptions are piers 12 and 13 at structure L0135 on State Highway 51 at Chester, Illinois, where the bedrock material was fully exposed around the piers. The average difference between the bathymetric surfaces between 2022 and 2018 varied from 0.41 foot higher to 1.86 feet lower. Between 2022 and 2014, the average difference between the bathymetric surfaces varied from 1.02 feet higher to 4.69 feet lower. Only the two sites on the Missouri River and the Caruthersville site were surveyed in 2011; for those sites, the average difference between the bathymetric surfaces varied from 5.83 feet higher to 1.34 feet lower. The most substantial overall net gain of sediment in a reach was between 2011 and 2022 at structure A1700 near Caruthersville, Mo. (site 38). This result was expected because structure A1700 is downstream from the confluences of the Missouri and Ohio Rivers, and therefore subject to the largest streamflows, the largest streamflow fluctuations, and the most substantial sediment flux, as has historically been observed at this site. The presence of riprap blankets, pier size and nose shape, and alignment to flow had a substantial effect on the size of the scour hole observed for a given pier. Piers that were surrounded by riprap blankets had scour holes that were substantially smaller (to nonexistent) compared to piers at which no rock or riprap were present. New riprap blankets were surveyed at pier 3 of structure L0098 at Brownville, Nebraska, and at piers 15–18 of structure A1700 near Caruthersville, Mo., that effectively mitigated the scour holes historically observed at these piers. Narrow piers having round or sharp noses that were aligned with flow often had scour holes that were difficult to discern from nearby bed features, whereas piers having wide or blunt noses resulted in larger, deeper scour holes. Several of the structures had piers that were skewed to primary approach flow. Scour holes near these piers consistently displayed greater depth on the side of the pier with impinging flow and deposition on the leeward side of the pier.

Missouri↗
USGS2026

Ground-motion characterization for the 2025 U.S. National Seismic Hazard Model for Puerto Rico and the U.S. Virgin Islands

We develop the ground-motion characterization (GMC) for the 2025 U.S. National Seismic Hazard Model for Puerto Rico and the U.S. Virgin Islands (NSHM-PRVI) for earthquakes in active crustal, subduction interface, and subduction intraslab regimes. Using ground-motion models (GMMs) from the Next-Generation Attenuation (NGA)-West2 and NGA-Subduction projects, the GMC is parameterized by scaled-backbone models for median ground motions and by independent logic trees of aleatory variability. We introduce several novel GMC features into the U.S. NSHM: (1) use of regional ground-motion data for modeling median ground motions; (2) development of scaled-backbone models for median ground motions; and (3) development of independent logic trees of aleatory variability from variance components of GMMs and computed from multiple ground-motion datasets, and incorporating regional ground-motion data effects on variability. We compute probabilistic seismic hazard curves and maps to evaluate the contributions from the GMC components and for comparison with the 2003 GMC. Contributions of the GMC to epistemic uncertainty in seismic hazard are evaluated through spatial variations in epistemic uncertainty in hazard maps, comparisons between mean hazard curves and fractiles, as well as investigations of the contributions of logic-tree branches to hazard maps and curves. Comparisons between seismic hazard from the 2025 and 2003 GMCs allow examination of the changes in hazard curves and mapped values with 2% and 10% probabilities of exceedance in 50 years. The 2025 GMC exhibits modest changes in median predictions, relative to the 2003 GMC; overall, values of aleatory variability are higher, except at long periods ( ), resulting in changes to probabilistic ground motions at low probabilities of exceedance (<10% probability of exceedance in 50 years). Changes in hazard at 2% and 10% probabilities of exceedance in 50 years are also relatively modest (within 20%) at most sites, with the impacts from the 2025 GMC exhibiting minor reductions and increases at 0.2 and 1.0 s periods, respectively, relative to the 2003 GMC.

Puerto Rico, U.S. Virgin Islands↗
USGS2025

Observing northern high-latitude river systems to understand changes in a warming Arctic

Purpose of Review Streams and rivers are undergoing rapid change as the Arctic warms and thaws. We review recent observations in Arctic stream systems to identify ubiquitous changes and the most useful tools for observing change and exploring the underlying processes. Recent Findings Recent literature indicates increasingly significant trends in river hydrology and chemistry due to persistent warming in the Arctic and longer observational records for analysis. However, regional differences in the magnitude and direction of these trends persist. We also observe thresholds in ground thaw and surface–groundwater interactions that can impact river hydrology and chemistry. Summary Warming and thaw are occurring rapidly at high latitudes, resulting in increasing, yet variable responses in stream systems across regions and scales. These differences highlight the need for long-term records and an interdisciplinary approach to explain trends and predict future states. Stream systems respond to multiple landscape changes related to hydrology (changing precipitation and subsurface flow), geology (ground thaw dynamics), and ecology (vegetation change).

Current Climate Change Reports↗
USGS2025

High frequency and region-scale simulations of large (Mw7+) earthquakes on the southern Whidbey Island fault, Washington, USA

We simulate ground shaking in western Washington State from hypothetical M w 7.0–7.5 earthquakes on the southern Whidbey Island fault (SWIF). Ground motions are modeled considering kinematic source distributions on a complex fault plane, a 3D seismic velocity model, and region‐specific soil velocity models. We run simulations with varying model resolutions, including regional‐scale simulations with a maximum‐modeled frequency of ∼1 Hz and local‐scale simulations with a maximum‐modeled frequency of ∼2.5 Hz. Additional local‐scale simulations are run considering high‐resolution surface topography. We explore how source parameters (i.e., magnitude, hypocenter location, and dip direction) and 3D velocity structure impact peak shaking intensity and its variability. In particular, we find that earthquakes on the SWIF would likely produce strong shaking throughout the populated Puget Lowland, including in the cities of Everett, Seattle, Bellevue, and Tacoma, Washington. Simulated short‐period ( T ≤ 2 s) spectral accelerations are strong throughout the Puget Lowland, and long‐period shaking ( T ≥ 5 s) is strong in the deep regional sedimentary basins, especially the Everett and Seattle basins. Source parameters strongly influence intra‐ and interevent variability in response, primarily through changes in source and site geometry, as well as rupture directivity. We also note a potential coupling between rupture directivity and basin effects, wherein directivity pulses are seemingly guided through the region’s deep, interconnected sedimentary basins. Overall, this work highlights the impacts of 3D source, path, and site effects on seismic hazard in the U.S. Pacific Northwest and substantially expands the catalog of simulated ground motions for Puget Sound area crustal faults.

Washington↗
USGS2025

Summary of results from monitoring the Geysers with continuous passive seismic and repeat magnetotelluric measurements (2021-2023)

Understanding temporal variations in a geothermal field can support operators in decision making that pertains to optimizing production and mitigating hazards. Between 2021 and 2023, The Geysers geothermal field in northern California was monitored with an array of continuous passive seismic sensors and annual repeat magnetotelluric (MT) measurements. Each of these data sets were analyzed and modelled separately to understand the data, sensitivity, and any observable changes. Then, the data were inverted jointly using a crossgradient method to further constrain temporal changes in geophysical properties within the geothermal field. Multiple permutations of annual datasets were used as inputs to the joint inversion. Results demonstrate seismic data constrain smooth inversion of the MT data, and the MT data provide supplementary information about the location of temporal fluid changes. Estimating relative changes in steam saturation for various time intervals of the joint models shows compartmentalized changes in the field, and good spatial correlation with the location of injection wells. These results demonstrate that collecting both passive seismic and MT measurements then modeling them jointly provide complementary information and a relatively inexpensive method for monitoring temporal changes in an active geothermal field that provides results to support operators.

California↗
USGS2026

A deep dive into subduction zones and the Japan Trench

Deep beneath the ocean, giant slabs of rock slide beneath one another in areas called subduction zones. These powerful movements shape the planet by building mountains, creating fiery volcanoes, and even causing huge earthquakes. Scientists study subduction zones to understand why these natural events happen and where and how they might occur so we can be better prepared. One important subduction zone is the Japan Trench, where a big earthquake happened in 2011. To learn more about subduction zones, scientists go on ocean drilling expeditions. They sail on research ships, drill into the seafloor, and collect rock samples. These samples help scientists understand what happened in the past and how subduction zones work. In turn, this information helps communities better understand and prepare for future earthquakes.

Frontiers for Young Minds↗
USGS2025

Depth of magma crystallization and fluid exsolution beneath the porphyry-skarn Cu deposits at Santa Rita and Hanover-Fierro, New Mexico, USA

The depth level at which porphyry Cu–forming magmas fractionated and exsolved mineralizing fluids is actively debated. In the classic model, extensive magma fractionation occurs in large, upper crustal magma chambers, and concomitant fluid exsolution leads to forceful expulsion of residual magmas in the form of porphyry dikes, stocks, and breccia pipes, which subsequently serve as pathways for the mineralizing fluids. In contrast, some recent studies highlighting the role of deep crustal magma fractionation in the production of fertile magmas essentially deny the existence of upper crustal magma chambers at the time of mineralization. To address this, we conducted a detailed thermobarometric investigation of 13 intermediate to felsic, porphyritic intrusive rocks related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, United States, representing two premineralization magmas (61–60 Ma), seven synmineralization magmas (60–58 Ma), and four late- to postmineralization magmas (58–57 Ma). For each sample, the pressure of last magma crystallization before final magma ascent to the current exposure level was reconstructed based on Al-in-hornblende barometry of small hornblende inclusions trapped within quartz phenocrysts and through titanium-in-quartz (TitaniQ) thermobarometry of the host quartz phenocrysts themselves. Since quartz is one of the last crystallizing magmatic minerals, and no significant phenocryst growth could have occurred in small dikes and stocks after final magma emplacement, quartz phenocrysts and their contained hornblende inclusions record the depth of last magma crystallization before final magma ascent. When present, hornblende phenocrysts and hornblende inclusions within other major phenocrysts were also analyzed. Both quartz and hornblende barometers return consistent average pressures of 3.2 ± 0.4 kbar for the entire suite of pre- to postmineralization magmas, corresponding to depths of 11 to 14 km. The synmineralization magmas return even more consistent average pressures of 3.1 ± 0.2 kbar, corresponding to a depth of 12 ± 1 km. The volume of the mineralizing porphyry dikes and stocks at the emplacement level is far too small to have provided all the fluids and metals required to form the observed ore deposits. Therefore, the majority of the ore-forming fluids must have originated from the magmas that crystallized at 12 ± 1 km depth. The ore deposits, conversely, formed at ~5-km paleodepth. This implies that most of the mineralizing fluids traveled an average vertical distance of ~7 km from their magmatic source to the eventual site of ore precipitation. The relatively unaltered nature and low veining degree of deeper parts of mineralized porphyry dikes and stocks suggest that the fluid transport through these intrusive bodies occurred mostly at near-solidus conditions by means of fluid percolation along grain boundaries. In summary, our results suggest that (1) a large, upper crustal pluton exists ~7 km beneath the Santa Rita and Hanover-Fierro deposits; (2) abundant phenocryst crystallization occurred at this depth level; and (3) this pluton was the main source for the exsolution of ore-forming fluids. However, the investigated rocks have elevated whole-rock Sr/Y ratios, indicating magma fractionation at deep crustal levels. As a result, our preferred model is a combination of the two end-member models introduced above, with most magma fractionation having occurred in the deep crust and with residual, intermediate to felsic melts having ascended and accumulated at 11 to 14 km paleodepth, where they continued to crystallize with comparatively little crystal-liquid separation, before some of these magmas ascended further to shallow levels and quenched to porphyries.

New Mexico↗
USGS2025

Multi-lithofacies alluvial characterization via airborne electromagnetic-borehole fusion using ordinary interval kriging and geologic constraints

Airborne electromagnetic (AEM) survey provides extensive spatial coverage and detailed resolution at the near surface and can be used to develop hydrogeological models. However, utilization of AEM data is not straightforward because AEM resistivity is an indirect measurement for inferring sediment types. This study develops an ordinary interval kriging (OIK) algorithm and a resistivity-to-multi-lithofacies (R2ML) data fusion workflow for multi-lithofacies alluvial characterization. OIK utilizes irregular interval data to construct three-dimensional (3D) resistivity fields from one-dimensional inverted AEM resistivity models. The R2ML workflow maps the resistivity field generated from OIK into a multi-facies lithological model, incorporating geologic constraints derived from well logs and geological observations. The numerical and real-world cases demonstrate that OIK is computationally efficient, accounts for 3D anisotropy, and minimizes the smoothing effect, thereby preserving resistivity contrasts and reducing interpolation uncertainty. The methodology is applied to lithologic characterization of the Mississippi River Valley alluvial aquifer (MRVA) in the Shellmound area, Mississippi, U.S. A frequency-domain AEM survey was conducted to support groundwater studies for the managed aquifer recharge (MAR) to the MRVA. The resulting lithological model, including four types of lithofacies—clay, very fine sand, fine-medium sands, and graveliferous sands, illustrates the geomorphological processes of the MRVA and implies potential MAR. The alignment between the lithological model and existing geological and hydrogeological investigations demonstrates that OIK and R2ML workflow effectively capture the subsurface architecture of the MRVA. The methods have broad applicability for characterizing alluvial aquifers through AEM-borehole data fusion, supporting sustainable groundwater management.

Mississippi↗
USGS2025

Pre-Acadian tectonics of the eastern Orange-Milford Belt, south-central Connecticut

This excursion presents a reinterpretation of mapping and new analytical data from the eastern Orange-Milford belt (OMB) in south-central Connecticut. The OMB is a fault-bound terrane of argillites and mafic rocks of anomalously low metamorphic grade—and of poorly constrained ages and tectonic affinity—wedged between kyanite/sillimanite-grade peri- Laurentian rocks to the west and anatectic peri-Gondwanan rocks to the east (Fig. 1A). Our data demonstrate that Ordovician(?) igneous and sedimentary rocks of the OMB were variably metamorphosed in the Ordovician and Silurian but escaped regionally pervasive, high-grade Devonian and later metamorphism. Previous interpretations (Fritts 1963a, 1965a, 1965b; Burger, 1967; Burger and others, 1968; Rodgers, 1985) described these rocks as a conformable sequence of low-grade, Ordovician to Devonian metasediments and metavolcanics. Our results reveal that the “metavolcanics” are not extrusive rocks but rather slivers of lower oceanic crust with complicated high- and low-grade metamorphic fabrics, intruded by a swarm of Silurian sheeted basalt dikes, and in fault contact with the surrounding metasediments. The purpose of this trip is to show evidence of early Paleozoic (Taconic) deformation and metamorphism preserved in rocks of the eastern OMB. These rocks remained shallow, cool, and sufficiently dry during the regionally dominant Acadian and Alleghanian orogenies to have avoided significant overprinting. As such, these rocks serve as windows into a geologic history otherwise unavailable between anatectic rocks of the peri-Gondwanan Bronson Hill, Avalon, and Gander terranes east of the Hartford basin and sillimanite-grade rocks of the peri-Laurentian Hartland and gneiss dome belts west of the OMB. We present major and trace element geochemistry including rare-earth element patterns for all mafic units in the eastern OMB as well as 40 Ar/ 39 Ar age spectra of amphibole, muscovite, and K-feldspar from rocks of the Maltby Lakes complex (of Deasy and others, 2017), Savin Schist, and Wepawaug Schist. Our evidence demonstrates that the units of the OMB have been assembled by faulting or intrusion, and that no stratigraphic relationships exist between the argillaceous schists and the metaigneous rocks.

Connecticut↗
USGS2025

Dynamic feedbacks between river meandering and landsliding in northwestern Washington glacial terraces

Landsliding in river valleys poses unique risks for cascading hazards and can damage infrastructure and cause fatalities. In postglacial valleys, many landslides are posited to occur in relation to lateral river erosion, but the dynamics of fluvial-hillslope interactions are not well understood. Here, we investigate a section of the Nooksack River in western Washington State where the channel is flanked by landslide-prone glacial terraces similar to those that failed in the 2014 State Route 530 “Oso” landslide. We map 216 landslides through time across 17 aerial imagery data sets (1933–2022) and analyze them in relation to river meandering and curvature. We observe dynamic feedbacks between lateral river meandering and valley-adjacent landsliding. Terrace lateral retreat rates of up to 25 m/year owing to combined fluvial erosion and slope failure occur on pinned, outer meander bends immediately downstream from peaks in river curvature (>0.0075 1/m); these locations are predisposed to both shallow and deep-seated landslides. Deep-seated landslides extending 17%–32% of the active valley width into the floodplain can displace the river away from the floodplain margin and change the channel planform. River-displacing landslides relocate meanders up- or downstream, thereby conditioning the location of subsequent landslides. This conceptual model of coupled landslide-driven meander displacement and valley-adjacent landsliding is exemplified across western Washington river systems. The distance between up- and downstream valley-adjacent landsliding scales with valley width, meander wavelength, and terrace height. Our results can advance our understanding of the river-hillslope interface in landscape evolution and can be used to inform hazard management in river corridors.

Washington↗
USGS2025

Unveiling coseismic deformation from differenced legacy aerial photography and modern lidar topography: The 1983 M6.9 Borah Peak earthquake, Idaho, USA

The 1983 M6.9 Borah Peak, Idaho, earthquake is one of the largest historical normal fault earthquakes in the western United States. We quantified meter-scale vertical change along the 35 km-long rupture using topographic differencing of 1966 aerial imagery and 2019 lidar-derived data. The initial differencing results are largely obscured by horizontal and vertical georeferencing errors and flight-line stripes. Our error corrections are designed to be insensitive to the coseismic deformation and reduced error by 50%. We calculated vertical separation and resolved a maximum of 2.02 ± 0.46 m at Doublespring Pass. Our vertical separation measurements are generally consistent with those from prior studies using field data and post-earthquake topographic data. However, the differencing measurements are a few decimeters lower than these prior measurements, indicating that differencing can isolate historical from prehistoric earthquake deformation. Our study demonstrates that revisiting historical earthquakes can provide new insights into the magnitude and patterns of coseismic deformation.

Idaho↗
USGS2026

USGS 2025 critical minerals review

The United States Geological Survey (USGS) provides scientific information for the Department of Interior and the nation, consistent with its original mission expressed in the Organic Act of 1879 (43 U.S.C. 31): “the classification of the public lands and examination of the geological structure, mineral resources, and products within and outside the national domain.” Legislation such as the Energy Act of 2020 and the 2022 Infrastructure Investment and Jobs Act (43 USC 31l) and recent executive actions (Executive Orders 14154 , 14153, 14241 Secretary’s Orders 3417, 3418, 3422, 3436) underscore the importance of mineral resources and focus USGS activities on mapping and assessing mineral resources, with a particular focus on those presently identified as critical, both in ground and above ground in mine wastes. This article reviews selected activities and accomplishments by the USGS Mineral Resources Program related to critical minerals in 2025. Highlights include a new List of Critical Minerals, a first-ever national mine waste inventory, international minerals partnerships, mineral resource assessment advancements, and national data collection activities and outcomes of the Earth Mapping Resources Initiative (Earth MRI). The selected contributions are not comprehensive but are intended to demonstrate USGS leadership in critical mineral mapping and assessment, the importance of domestic and global partnerships, and the breadth of research activities that are responsive to national needs and priorities.

Mining Engineering↗
USGS2025

Comparative properties of saponitic fault gouge and serpentinite muds cored from mud volcanoes of the Mariana subduction zone

We obtained 12 core samples for physical and chemical characterization from three serpentinite mud volcanoes (Yinazao, Asùt Tesoru, and Fantangisña) located on the forearc of the Mariana subduction system, that were drilled during International Ocean Discovery Program Expedition 366. Two samples from the Fantangisña mud volcano are interpreted to be clay-rich fault gouges derived from the subduction channel. Their bulk compositions are intermediate between the serpentinites and oceanic basalts. The oceanic crustal materials in the gouges have been thoroughly metasomatized and the serpentinites extensively altered to the trioctahedral, Mg-rich smectite clays saponite and corrensite. The only relict phases in clasts of crustal rock are accessory Ti- and P-bearing minerals. The two fault gouge samples have lower frictional strengths ( μ < 0.2) than the serpentinites ( μ = 0.2–0.4), and their measured permeabilities are also somewhat lower. Their physical and compositional properties correspond to saponitic gouges from other faults that juxtapose serpentinite against crustal rocks, in particular gouges from the two creeping traces of the San Andreas Fault recovered in the core from the San Andreas Fault Observatory at Depth. The décollement beneath Fantangisña mud volcano is thus expected to be very weak and likely characterized by stable slip.

Geophysics, Geochemistry, Geosystems↗
USGS2025

Earthquake probabilities and hazards in the U.S. Pacific Northwest

Earthquakes and their cascading consequences pose a significant threat to the people, environment, infrastructure, and economy of the U.S. Pacific Northwest. The Pacific Northwest is susceptible to three types of earthquakes: deep (intraslab) earthquakes, subduction zone (megathrust) earthquakes, and shallow crustal earthquakes. For each of these earthquake types, earth scientists can use a variety of methods to estimate the probability of occurrence for future events, which constrains seismic hazard and informs building codes. The timing of past earthquakes indicates that there is an 85-percent chance of a magnitude 6.5 or greater deep earthquake in the Puget Sound region; a 10-15-percent chance of an approximately magnitude 9 earthquake on the Cascadia Subduction Zone; and a 17-percent chance of a magnitude 6.5 or greater crustal fault earthquake in the Puget Sound region in the next 50 years. Individuals and communities can take simple steps to prepare for and reduce the impact of future earthquakes.

California, Oregon, Washington↗
USGS2026

Tectonic implications of transitional melting regimes from petrological, geochronological, and compositional characterization of the ophiolitic Seventymile terrane, Alaska, USA

New geochemical, U-Pb geochronology, and Sr-Nd-Hf isotope data provide evidence for the tectonic evolution of the Seventymile terrane in interior Alaska, USA. Ultramafic and mafic rocks of the Seventymile terrane are thought to represent components of a dismembered ophiolite and provide unique constraints on regional terrane evolution and accretion. The Seventymile ophiolite represents fragments of the Devonian to Permian Slide Mountain Ocean (SMO) that separated allochthonous and parautochthonous continental fragments of western North America. It now occurs as multiple thrust sheets containing Permian mafic and ultramafic rocks overlying and/or possibly imbricated with amphibolite-facies supracrustal rocks of allochthonous Yukon-Tanana terrane and parautochthonous North America. Seventymile klippen contain variably serpentinized peridotite, primarily harzburgite, low-grade meta-mafic rocks, and minor oceanic sedimentary rocks (argillite, chert, limestone, and metasandstone). Mafic rocks include gabbro to diabase, typically as dikes, veinlets, or rare massive stocks intruding peridotite. Mafic rocks also include greenstones of the Seventymile assemblage in klippen structurally underlying, and in shear zone contact with, ultramafic klippen. New trace element and radiogenic isotope data from mafic magmatic rocks associated with the Seventymile ultramafic bodies show evidence for a weakly subduction-modified mantle source, like the mantle source of normal mid-ocean-ridge basalt (N-MORB) or back-arc basin basalt (BABB). Seventymile assemblage greenstones are more heterogeneous. They range from N-MORB to enriched mid-ocean-ridge basalt (E-MORB) and ocean-island basalt (OIB), with a subset of samples indicative of continental arc affinity. These geochemistry results indicate that distinct tectonic environments are represented by at least two, and possibly three, lithological and structural units comprising the Seventymile terrane. Hf-Nd isotope systematics are consistent with a depleted MORB mantle (DMM)−like component that overlaps with Pacific MORB. Primary zircon is rare, but new in situ U-Pb data for gabbro and greenstone indicate ca. 274−272 Ma peak zircon and titanite crystallization. Scattered younger zircons define a ca. 255 Ma zircon peak and correspond to secondary crystallization associated with baddeleyite reaction of high-Si fluids during low-grade metamorphism. If Seventymile suites are contemporaneous, obduction associated with the closure of the SMO resulted in the stacking of ophiolitic packages representing distinct tectonomagmatic settings across the transition from pericontinental, to epicontinental, to distal ocean back-arc. Intrusions hosted in klippe of ultramafic rocks, plus the least subduction-modified greenstones underlying them, geologically and compositionally resemble Slide Mountain rocks of the Campbell Range formation in eastern Yukon and may provide a new piercing point across the Tintina fault.

Alaska, British Columbia↗
USGS2024

Geospatial PDF map of the compilation of GIS data for the mineral industries and related infrastructure of Africa

Introduction In 2021, the U.S. Geological Survey's (USGS) National Minerals Information Center (NMIC) completed the project titled "Compilation of geospatial data for the mineral industries and related infrastructure of Africa." This project aimed to leverage the expertise and capabilities of the NMIC to collect, synthesize, and interpret geospatial data to inform on the extractive resources of the African region and expand the NMIC's understanding on the impact of mineral industry of African nations in the global economy. The African region, which comprises the independent nations that make up the African continent and its associated islands and dependencies, consists of a total of 58 mineral producing countries. The primary objective of this effort was to create a fully attributed Geographic Information System (GIS) portraying existing mining infrastructure, resources, and development capacity across Africa along with the related infrastructure capable of supporting current (for the reference year 2018) and future extractive industry operations in the region. The compiled GIS geodatabase with supporting documentation including comprehensive metadata was published as a USGS data release titled "Compilation of Geospatial Data (GIS) for the Mineral Industries and Related Infrastructure of Africa." This georeferenced portable document format (GeoPDF) map sheet presents a new geographic information product containing a partial representation of the GIS data. This GeoPDF map provides a visual comparison of the distribution of mineral industry and related infrastructure GIS data, which contributes to a deeper understanding of the intersections and complexities of the extractive industries within Africa.

Open-File Report↗
USGS2008

Late Jurassic igneous rocks in south-central Arizona and north-central Sonora: Magmatic accompaniment of crustal extension

In Middle Jurassic time, the region of south-central Arizona and north-central Sonora was part of a continental magmatic arc. In early Late Jurassic time, this magmatic arc gradually gave way to a extensional regime. Late Jurassic rifting was accompanied by magmatism, typically small in volume relative to the preceding arc phase, and with mildly alkaline compositions. These igneous rocks, the 158- to 146-Ma Ko Vaya Suite, make up much or most of the Comobabi, Artesa, Quijotoa, and Brownell Mountains and Sierra del Cobre. The bimodal Ko Vaya Suite constitutes volcanic to shallow plutonic complexes comprising chiefly trachyandesite and volcanic wacke; monzodiorite; rhyolite porphyry; distinctive, compositionally and texturally heterogeneous, quartzpoor granite (the Ko Vaya Granite); A-type perthite granite and quartz syenite; aphyric intrusive rhyolite; and locally abundant hematite veins. Alteration, particularly potassic alteration, is widespread. Minimally altered samples of granite and quartz syenite have the composition of trachyte or trachydacite and alkali rhyolite. The Ko Vaya Suite is nonconformably overlain by the latest Jurassic Sand Wells Formation, approximately correlative with the Glance Conglomerate, the basal unit of the Bisbee Group. The Ko Vaya Suite is in some ways analogous to the coeval Independence dike swarm of eastern California, but less diffuse. We infer that the Ko Vaya Suite represents especially intense or focused Late Jurassic extensional magmatism.

Arizona, Sonora↗