Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Energy”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62Linked to original sources

Hydrological and thermal response of lakes to climate: Description and modeling

Lake systems continually respond to climatic conditions that vary over broad scales of space and time. The spatial distribution of lakes on the Earth’s surface is indicative of long-term patterns of atmospheric circulation, and the annual cycle of climate over lake basins is reflected in seasonal change in the size and temperature of lakes. Lake size is determined by the balance of water inputs and outputs, and lake temperature is governed by the balance of heat inputs and outputs. The lake hydrological and energy balances are coupled to the atmosphere. In response to the inputs of mass, energy, and momentum (precipitation, radiation, and wind stress), lakes return heat and moisture to the atmosphere through conduction and evaporation. Global, regional, or local change in the hydrological or thermal states of lakes thus represent interactive responses to climatic variation in the supply of water and energy.

Book chapter↗

Alternative solution model for the ternary carbonate system CaCO3 - MgCO3 - FeCO3 - II. Calibration of a combined ordering model and mixing model

Earlier attempts at solution models for the ternary carbonate system have been unable to adequately accommodate the cation ordering which occurs in some of the carbonate phases. The carbonate solution model of this study combines a Margules type of interaction model with a Bragg-Williams type of ordering model. The ordering model determines the equilibrium state of order for a crystal, from which the cation distribution within the lattice can be obtained. The interaction model addresses the effect that mixing different cation species within a given cation layer has on the total free energy of the system. An ordering model was derived, based on the Bragg-Williams approach; it is applicable to ternary systems involving three cations substituting on two sites, and contains three ordering energy parameters (WCaMg, WCaFe, and WCaMgFe). The solution model of this study involves six Margules-type interaction parameters (W12, W21, W13, W31, W23, and W32). Values for the two sets of energy parameters were calculated from experimental data and from compositional relationships in natural assemblages. ?? 1993 Springer-Verlag.

Physics and Chemistry of Minerals↗

Thermodynamics of gas and steam-blast eruptions

Eruptions of gas or steam and non-juvenile debris are common in volcanic and hydrothermal areas. From reports of non-juvenile eruptions or eruptive sequences world-wide, at least three types (or end-members) can be identified: (1) those involving rock and liquid water initially at boiling-point temperatures (‘boiling-point eruptions’); (2) those powered by gas (primarily water vapor) at initial temperatures approaching magmatic (‘gas eruptions’); and (3) those caused by rapid mixing of hot rock and ground- or surface water (‘mixing eruptions’). For these eruption types, the mechanical energy released, final temperatures, liquid water contents and maximum theoretical velocities are compared by assuming that the erupting mixtures of rock and fluid thermally equilibrate, then decompress isentropically from initial, near-surface pressure (≤10 MPa) to atmospheric pressure. Maximum mechanical energy release is by far greatest for gas eruptions (≤∼1.3 MJ/kg of fluid-rock mixture)-about one-half that of an equivalent mass of gunpowder and one-fourth that of TNT. It is somewhat less for mixing eruptions (≤∼0.4 MJ/kg), and least for boiling-point eruptions (≤∼0.25 MJ/kg). The final water contents of crupted boiling-point mixtures are usually high, producing wet, sloppy deposits. Final erupted mixtures from gas eruptions are nearly always dry, whereas those from mixing eruptions vary from wet to dry. If all the enthalpy released in the eruptions were converted to kinetic energy, the final velocity ( v max ) of these mixtures could range up to 670 m/s for boiling-point eruptions and 1820 m/s for gas eruptions (highest for high initial pressure and mass fractions of rock ( m r ) near zero). For mixing eruptions, v max ranges up to 1150 m/s. All observed eruption velocities are less than 400 m/s, largely because (1) most solid material is expelled when m r is high, hence v max is low; (2) observations are made of large blocks the velocities of which may be less than the average for the mixture; (3) heat from solid particles is not efficiently transferred to the fluid during the eruptions; and (4) maximum velocities are reduced by choked flow or friction in the conduit.

Bulletin of Volcanology↗

The Alabama, U.S.A., seismic event and strata collapse of May 7, 1986

On May 7, 1986, the residents of Tuscaloosa, Alabama, felt a seismic event of local magnitude 3.6 that occurred at the same time as a rock burst and roof collapse in an active longwall coal mine. Visual inspection of the seismograms reveals a deficiency in energy at frequencies above 20 Hz compared to tectonic earthquakes or surface blasts. The predominance of energy below 5 Hz may explain reports of body wave magnitudes (mb) greater than 4.2. Also, 1.0 Hz surface waves were more strongly excited than body waves and may explain local felt effects more typically associated with greater epicentral distances. All recorded first motions were dilatational. The concentration of stations in the northern hemisphere allows reverse motion on an east-trending near-vertical plane or strike-slip motion on northwest or southeast trending planes. The reverse focal mechanism is preferred, because the area of roof collapse and the area of active longwall mining are located between two east-striking loose vertical fracture zones. The characteristics of the seismic event suggest that it might have been sudden shear failure resulting from accumulated strain energy in overlying strata behind an active longwall. Although an alternate interpretation of the focal mechanism as an implosion or shear failure in the strata above previously mined out areas is also allowed by the first motion data, this alternate intepretation is not supported by geological data. ?? 1989 Birkha??user Verlag.

Pure and Applied Geophysics PAGEOPH↗

Man-induced gradient adjustment of the South Fork Forked Deer River, west Tennessee

Channel modifications from 1968 to 1969 on the South Fork Forked Deer River in western Tennessee have caused upstream degradation, downstream aggradation, and bank failures along the altered channels, adjacent reaches, and tributaries. The result of these adjustments is a general decrease in gradient as the channel attempts to absorb the imposed increase in energy conditions created by channelization. Headward degradation at a rate of approximately 2.57 km/yr on the South Fork Forked Deer River caused from 1.52 m to about 3.14 m of incision over a 13.5 km reach from 1969 to 1981. As a consequence of substantially increased sediment supply, approximately 2.13 m of aggradation was induced downstream of this reach during the same period. This accumulation represents a 60% recovery of bed level at the downstream site since the completion of channel work in 1969. Gradient adjustment with time is described by exponential decay functions. The length of time required for adjustment to some new quasi-equilibrium condition is computed by these decay functions and is about 20 years from the completion of channel work. Adjusted slopes are less than predisturbed values, probably because straightened channels dissipate less energy by friction, allowing more energy for sediment transport. An equivalent sediment load, therefore, can be transported at a considerably gentler slope. The predisturbed slope exceeds the adjusted slope by an order of magnitude on the downstream reach of the South Fork Forked Deer River. ?? 1987 Springer-Verlag New York Inc.

Environmental Geology and Water Sciences↗

Effect of dynamical phase on the resonant interaction among tsunami edge wave modes

Different modes of tsunami edge waves can interact through nonlinear resonance. During this process, edge waves that have very small initial amplitude can grow to be as large or larger than the initially dominant edge wave modes. In this study, the effects of dynamical phase are established for a single triad of edge waves that participate in resonant interactions. In previous studies, Jacobi elliptic functions were used to describe the slow variation in amplitude associated with the interaction. This analytical approach assumes that one of the edge waves in the triad has zero initial amplitude and that the combined phase of the three waves φ = θ 1 + θ 2 − θ 3 is constant at the value for maximum energy exchange ( φ = 0). To obtain a more general solution, dynamical phase effects and non-zero initial amplitudes for all three waves are incorporated using numerical methods for the governing differential equations. Results were obtained using initial conditions calculated from a subduction zone, inter-plate thrust fault geometry and a stochastic earthquake slip model. The effect of dynamical phase is most apparent when the initial amplitudes and frequencies of the three waves are within an order of magnitude. In this case, non-zero initial phase results in a marked decrease in energy exchange and a slight decrease in the period of the interaction. When there are large differences in frequency and/or initial amplitude, dynamical phase has less of an effect and typically one wave of the triad has very little energy exchange with the other two waves. Results from this study help elucidate under what conditions edge waves might be implicated in late, large-amplitude arrivals.

Pure and Applied Geophysics↗

PCB concentrations and activity of sea lamprey Petromyzon marinus vary by sex

We determined the polychlorinated biphenyl (PCB) concentrations of 40 male and 40 female adult sea lampreys Petromyzon marinus captured in the Cheboygan River, a tributary to Lake Huron, during May 2011. In addition, we performed a laboratory experiment using passive integrated transponder tags to determine whether male adult sea lampreys were more active than female adult sea lampreys. Sex had a significant effect on PCB concentration, and PCB concentration at a given level of sea lamprey condition was approximately 25 % greater in males than in females. Adjusting for the difference in condition between the sexes, males averaged a 17 % greater PCB concentration compared with females. Results from the laboratory experiment indicated that males were significantly more active than females. The observed sex difference in PCB concentrations was not due to female sea lampreys releasing eggs at spawning because the sea lamprey is semelparous, and we caught the sea lampreys before spawning. Rather, we attributed the sex difference in PCB concentrations to a greater rate of energy expenditure in males compared with females. We proposed that this greater rate of energy expenditure was likely due to greater activity. Our laboratory experiment results supported this hypothesis. A greater resting metabolic rate may also have contributed to a greater rate of energy expenditure. Our findings should eventually be applicable toward improving control of sea lamprey, a pest responsible for considerable damage to fisheries in lakes where it is not native.

Michigan↗

Proximate composition, energetic value, and relative abundance of prey fish from the inshore eastern Bering Sea: Implications for piscivorous predators

Changing ocean conditions and subsequent shifts in forage fish communities have been linked to numerical declines of some piscivorous marine birds and mammals in the North Pacific. However, limited information about fish communities is available for some regions, including nearshore waters of the eastern Bering Sea, where many piscivores reside. We determined proximate composition and energetic value of a suite of potential forage fish collected from an estuary on the Yukon-Kuskokwim Delta, Alaska, during 2002 and 2003. Across species, energy density ranged from 14.5 to 20.7 kJ g −1 dry mass and varied primarily as a function of lipid content. Total energy content was strongly influenced by body length and we provide species-specific predictive models of total energy based on this relationship; some models may be improved further by incorporating year and date effects. Based on observed energetic differences, we conclude that variation in fish size, quantity, and species composition of the prey community could have important consequences for piscivorous predators.

Polar Biology↗

Egg retention of high-latitude sockeye salmon (Oncorhynchus nerka) in the Pilgrim River, Alaska, during the Pacific marine heatwave of 2014–2016

Ocean and freshwater conditions can influence spawning success of Pacific salmon ( Oncorhynchus spp.) by governing the energy content of fish at the start of and during the spawning migration. Ocean conditions determine the energy stores of fish at the freshwater entry, while freshwater conditions determine how quickly stored energy is depleted as individuals migrate to spawning grounds in natal rivers and lakes. We assessed the occurrence of sockeye salmon ( Oncorhynchus nerka ) egg retention (failure to deposit eggs) in a high-latitude (~ 65°N) watershed that has a large, inter-annual variation in the number of returning adults. We also explored relationships between ocean and freshwater conditions with egg retention of female sockeye salmon. The proportion of females with egg retention (> 50 eggs) varied by threefold (12 to 36%) across years (2013 to 2020) and was related to ocean conditions represented by the North Pacific Index (NPI). Egg retention was more common in years with low NPI values (a stronger Aleutian Low) in association with the Pacific marine heatwave of 2014–2016 that disrupted food webs. This initial study contains the first empirical data observing the influence of ocean conditions on egg retention for any Pacific salmon population. The lack of any relationship between egg retention and freshwater temperatures was consistent with water temperatures primarily occurring below thresholds associated with heat stress related mortality (< 18 °C). Understanding the amount of egg retention and how environmental drivers influence egg retention within Pacific salmon populations provides insights for managers assessing the number of successful spawners and helps refine escapement-based management efforts.

Alaska↗

Terrestrial and semi-aquatic scavengers on invasive Pacific pink salmon (Oncorhynchus gorbuscha) carcasses in a riparian ecosystem in northern Norway.

Pacific pink salmon ( Oncorhynchus gorbuscha ) invasions, thought to originate from populations introduced and established in Russia, occurred along the Norwegian coast in 2017 and 2019. Despite several thousand pink salmon entering and establishing in northern Norwegian rivers, current understanding of the ecological effect of the species in northern Europe is limited. Scavengers feeding on pacific salmon carcasses are important vectors for the transport of marine derived energy and nutrients to terrestrial ecosystems in the Pacific Northwest, North America, where the salmon naturally occur. However the role of terrestrial and aquatic scavengers in the consumption and removal of pink salmon beyond the salmon’s native range is unknown. This study has identified terrestrial and sub-aquatic vertebrate scavengers on pink salmon carcasses in a sub-arctic river in northern Norway. Avian scavengers filmed by a camera placed near sites baited with pink salmon carcasses included the Eurasian magpie ( Pica pica ), hooded crow ( Corvus cornix ), common raven ( Corvus corax ), the European herring gull ( Larus argentatus ), redwing ( Turdus iliacus ) and goosander ( Mergus merganser ). However, the largest carcass weight was removed by red foxes ( Vulpes vulpes ). Carcasses entering Vesterelv River in 2019 were estimated to provide energy and nutrients to the river ecosystem an order of magnitude lower than in the Pacific Northwest. This study provides some of the first information in northern Europe on the mechanisms and quantification of energy and nutrient transfer from the ocean to riparian environments via introduced Pacific pink salmon. Results help to begin to determine the ecological effect of pink salmon and the development of appropriate management strategies.

Finnmark, Vesterelv↗

Physiological comparisons of plasma and tissue metrics of selected inland and coastal steelhead kelts.

The physiological status of migrating steelhead kelts ( Oncorhynchus mykiss ) from the Situk River, Alaska, and two tributaries of the Clearwater River, Idaho, was evaluated to explore potential differences in post-spawning survival related to energy reserves. Blood plasma samples were analyzed for metrics related to nutritional and osmotic status, and samples of white muscle tissue collected from recent mortalities at weirs were analyzed for proximate constituents. Female kelts from the Situk River had significantly higher plasma cholesterol, triglycerides, glucose and calcium concentrations, all of which suggested higher lipid and energy stores. Additional support for energy limitation in kelts was provided by evaluating the presence of detectable proteins in the plasma. Most all kelts sampled from the Situk River populations had detectable plasma proteins, in contrast to kelts sampled from the Clearwater River tributary populations where 27 % of kelts from one tributary, and 68 % of the second tributary were below the limits of detection. We found proximate constituents of kelt mortalities were similar between the Situk and Clearwater River populations, and the lipid fraction of white muscle averaged 0.1 and 0.2 %. Our findings lend support to the hypothesis that energetic limitations likely affect post-spawn survival in the Clearwater River kelts.

Alaska, Idaho↗

Life histories, salinity zones, and sublethal contributions of contaminants to pelagic fish declines illustrated with a case study of San Francisco Estuary, California, USA

Human effects on estuaries are often associated with major decreases in abundance of aquatic species. However, remediation priorities are difficult to identify when declines result from multiple stressors with interacting sublethal effects. The San Francisco Estuary offers a useful case study of the potential role of contaminants in declines of organisms because the waters of its delta chronically violate legal water quality standards; however, direct effects of contaminants on fish species are rarely observed. Lack of direct lethality in the field has prevented consensus that contaminants may be one of the major drivers of coincident but unexplained declines of fishes with differing life histories and habitats (anadromous, brackish, and freshwater). Our review of available evidence indicates that examining the effects of contaminants and other stressors on specific life stages in different seasons and salinity zones of the estuary is critical to identifying how several interacting stressors could contribute to a general syndrome of declines. Moreover, warming water temperatures of the magnitude projected by climate models increase metabolic rates of ectotherms, and can hasten elimination of some contaminants. However, for other pollutants, concurrent increases in respiratory rate or food intake result in higher doses per unit time without changes in the contaminant concentrations in the water. Food limitation and energetic costs of osmoregulating under altered salinities further limit the amount of energy available to fish; this energy must be redirected from growth and reproduction toward pollutant avoidance, enzymatic detoxification, or elimination. Because all of these processes require energy, bioenergetics methods are promising for evaluating effects of sublethal contaminants in the presence of other stressors, and for informing remediation. Predictive models that evaluate the direct and indirect effects of contaminants will be possible when data become available on energetic costs of exposure to contaminants given simultaneous exposure to non-contaminant stressors.

California↗

Experimental studies of alunite: II. Rates of alunite-water alkali and isotope exchange

Rates of alkali exchange between alunite and water have been measured in hydrothermal experiments of 1 hour to 259 days duration at 150 to 400°C. Examination of run products by scanning electron microscope indicates that the reaction takes place by dissolution-reprecipitation. This exchange is modeled with an empirical rate equation which assumes a linear decrease in mineral surface area with percent exchange (f) and a linear dependence of the rate on the square root of the affinity for the alkali exchange reaction. This equation provides a good fit of the experimental data for f = 17% to 90% and yields log rate constants which range from −6.25 moles alkali m −2 s −1 at 400°C to − 11.7 moles alkali m −2 s −1 at 200°C. The variation in these rates with temperature is given by the equation log k&#x2217; = &#x2212;8.17(1000/T(K)) + 5.54 (r 2 = 0.987) "> k∗ = −8.17(1000/T(K)) + 5.54 (r 2 = 0.987) which yields an activation energy of 37.4 ± 1.5 kcal/mol. For comparison, data from O'Neil and Taylor (1967) and Merigoux (1968) modeled with a pseudo-second-order rate expression give an activation energy of 36.1 ± 2.9 kcal/mol for alkali-feldspar water Na-K exchange. In the absence of coupled alkali exchange, oxygen isotope exchange between alunite and water also occurs by dissolution-reprecipitation but rates are one to three orders of magnitude lower than those for alkali exchange. In fine-grained alunites, significant D-H exchange occurs by hydrogen diffusion at temperatures as low as 100°C. Computed hydrogen diffusion coefficients range from −15.7 to −17.3 cm 2 s −1 and suggest that the activation energy for hydrogen diffusion may be as low as 6 kcal/mol. These experiments indicate that rates of alkali exchange in the relatively coarse-grained alunites typical of hydrothermal ore deposits are insignificant, and support the reliability of K-Ar age data from such samples. However, the fine-grained alunites typical of low temperature settings may be susceptible to limited alkali exchange at surficial conditions which could cause alteration of their radiometric ages. Furthermore, the rapid rate of hydrogen diffusion observed at 100–150°C suggests that fine-grained alunites are susceptible to rapid D-H re-equilibration even at surficial conditions.

Geochimica et Cosmochimica Acta↗

Spectral estimates of net radiation and soil heat flux

Conventional methods of measuring surface energy balance are point measurements and represent only a small area. Remote sensing offers a potential means of measuring outgoing fluxes over large areas at the spatial resolution of the sensor. The objective of this study was to estimate net radiation (R n ) and soil heat flux (G) using remotely sensed multispectral data acquired from an aircraft over large agricultural fields. Ground-based instruments measured R n and G at nine locations along the flight lines. Incoming fluxes were also measured by ground-based instruments. Outgoing fluxes were estimated using remotely sensed data. Remote R n , estimated as the algebraic sum of incoming and outgoing fluxes, slightly underestimated R n measured by the ground-based net radiometers. The mean absolute errors for remote R n minus measured R n were less than 7%. Remote G, estimated as a function of a spectral vegetation index and remote R n , slightly overestimated measured G; however, the mean absolute error for remote G was 13%. Some of the differences between measured and remote values of R n and G are associated with differences in instrument designs and measurement techniques. The root mean square error for available energy (R n - G) was 12%. Thus, methods using both ground-based and remotely sensed data can provide reliable estimates of the available energy which can be partitioned into sensible and latent heat under nonadvective conditions.

Remote Sensing of Environment↗

Fluvial sedimentation on a quivering craton: Influence of slight crustal movements on fluvial processes, upper Jurassic Morrison formation, western Colorado Plateau

One of the most important challenges facing the fluvial sedimentologist is identification of processes outside the stream channel that influence deposition of fluvial sediments. Detailed studies in the lower sequence of the Salt Wash Member (Morrison Formation, Upper Jurassic) demonstrate that crustal deformation at the site of deposition may considerably influence braided-stream processes. Late Jurassic crustal movements in the western part of the Colorado Plateau are interpreted largely from thickness variations and facies distribution, but other features such as vertical repetition of facies, coincidence with at least parts of present-day folds, and the geographic distribution of bedding parameters measured in the fluvial deposits, are also used as corroborating evidence of syndepositional tectonism. These features indicate that several of the large uplifts and basins in the region as well as some of the smaller folds within them were actively moving during deposition of the lower sequence. Tectonic activity altered the stream gradients, which in turn governed sinuosity, flow regime, energy levels, and sediment distribution. Cross-bedding studies indicate that reduced gradients within downwarped areas led to slight increases in sinuosity of the braided-stream channels and of the small sub-channels within them. The lowered gradients apparently resulted in a decrease in the depth of the channels and allowed the streams to flood more readily, producing abundant upper-flow regime horizontal laminations in the channel deposits. In addition, greater quantities of sediment containing higher proportions of sand were deposited in downwarped areas than in positive localities. The inability of the streams to transport bed load through downwarped areas indicates loss of stream energy. However, an increase in the quantity of upper-flow regime horizontal laminations in the same downwarped areas suggests that an increase in flow regime is not necessarily accompanied by an increase in energy levels, at least in regions of slight tectonic activity where the local configuration of the stream channels may change appreciably. Strata presently dip less than 2° throughout most of the region, and this relatively small amount of deformation reflects the combined effects of Late Jurassic, Cretaceous and Tertiary tectonism. This demonstrates that the amount of structural deformation at the site of deposition may appear to be insignificant, yet it can cause appreciable changes in the nature of braided-stream deposits.

Arizona, Utah↗

MBSSAS: A code for the computation of margules parameters and equilibrium relations in binary solid-solution aqueous-solution systems

The computer code MBSSAS uses two-parameter Margules-type excess-free-energy of mixing equations to calculate thermodynamic equilibrium, pure-phase saturation, and stoichiometric saturation states in binary solid-solution aqueous-solution (SSAS) systems. Lippmann phase diagrams, Roozeboom diagrams, and distribution-coefficient diagrams can be constructed from the output data files, and also can be displayed by MBSSAS (on IBM-PC compatible computers). MBSSAS also will calculate accessory information, such as the location of miscibility gaps, spinodal gaps, critical-mixing points, alyotropic extrema, Henry's law solid-phase activity coefficients, and limiting distribution coefficients. Alternatively, MBSSAS can use such information (instead of the Margules, Guggenheim, or Thompson and Waldbaum excess-free-energy parameters) to calculate the appropriate excess-free-energy of mixing equation for any given SSAS system.

Computers & Geosciences↗

Further discussions on the relationship between cumulated intercepted solar radiation and crop growth

A strong correlation exists between intercepted solar radiation and crop growth. We cautioned that many derivations of the functional relationship between solar energy and biomass use cumulated data, and therefore have logical and arithmetic weaknesses. We examined the growth response of plants to solar energy by using rates of change, of both interception and growth. Our analysis revealed that measurements of light interception can only establish the relationship a posteriori. Replacing interception data with normalized random numbers did not change the quality of the relations. Several scientists have contested our views. This article reconfirms the general validity of our analysis and of our conclusions, that it is not possible to determine plant growth on the sole basis of intercepted solar energy.

Agricultural and Forest Meteorology↗

Control of invasive sea lampreys using the piscicides TFM and niclosamide: Toxicology, successes & future prospects

The invasion of the Laurentian Great Lakes of North America by sea lampreys ( Petromyzon marinus ) in the early 20th century contributed to the depletion of commercial, recreational and culturally important fish populations, devastating the economies of communities that relied on the fishery. Sea lamprey populations were subsequently controlled using an aggressive integrated pest-management program which employed barriers and traps to prevent sea lamprey from migrating to their spawning grounds and the use of the piscicides (lampricides) 3-trifluoromethyl-4-nitrophenol (TFM) and niclosamide to eliminate larval sea lampreys from their nursery streams. Although sea lampreys have not been eradicated from the Great Lakes, populations have been suppressed to less than 10% of their peak numbers in the mid-1900s. The ongoing use of lampricides provides the foundation for sea lamprey control in the Great Lakes, one of the most successful invasive species control programs in the world. Yet, significant gaps remain in our understanding of how lampricides are taken-up and handled by sea lampreys, how lampricides exert their toxic effects, and how they adversely affect non-target invertebrate and vertebrates species. In this review we examine what has been learned about the uptake, handling and elimination, and the mode of TFM and niclosamide toxicity in lampreys and in non-target animals, particularly in the last 10 years. It is now clear that the mode of TFM toxicity is the same in non-target fishes and lampreys, in which TFM interferes with oxidative phosphorylation by the mitochondria leading to decreased ATP production. Vulnerability to TFM is related to abiotic factors such as water pH and alkalinity, which we propose changes the relative amounts of the bioavailable un-ionized form of TFM in the gill microenvironment. Niclosamide, which is also a molluscicide used to control snails in areas prone to schistosomiasis infections of humans, also likely works by uncoupling oxidative phosphorylation, but less is known about other aspects of its toxicology. The effects of TFM include reductions in energy stores, particularly glycogen and high energy phosphagens. However, non-target fishes readily recover from sub-lethal TFM exposure as demonstrated by the rapid restoration of energy stores and clearance of TFM. Although both TFM and niclosamide are non-persistent in the environment and critical for sea lamprey control, increasing public and institutional concerns about pesticides in the environment makes it imperative to explore other means of sea lamprey control. Accordingly, we also address possible “next-generation” strategies of sea lamprey control including genetic tools such as RNA interference and CRISPR-Cas9 to impair critical physiological processes (e.g. reproduction, digestion, metamorphosis) in lamprey, and the use of green chemistry to develop more environmentally benign chemical methods of sea lamprey control.

Great Lakes↗