Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Mining Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61Linked to original sources
USGS1959

Paleozoic and mesozoic fossils in a thick stratigraphic section in the eastern Sierra Nevada, California

A thick section of metamorphosed Paleozoic and Mesozoic rocks is exposed in two roof pend- ants, one each in the Mount Morrison and Devils Postpile quadrangles in the eastern Sierra Nevada near Mammoth Lakes, Cali- fornia (Fig. 1). In the course of geologic mapping in these quadrangles by the U. S. Geo- logical Survey in co-operation with the California Division of Mines, fossils of Ordovician, Pennsylvanian, Permian(P), and Early Jurassic ages were collected from weakly metamorphosed parts of the pendants. Detailed map- ping in the Mount Morrison quadrangle has been completed by Rinehart and Ross, and a report on this area is in preparation. Similar mapping in the Devils Postpile quadrangle by Rinehart and Huber is in progress. In the part of the Devils Postpile quadrangle not yet covered in the present study, the contacts shown on the map (Fig. 1) are after Erwin (1934). Because diagnostic fossils are extremely rare in the metamorphic rocks of the Sierra Nevada, these fossils are considered important enough to merit this short note prior to completion of the detailed mapping in the Devils Postpile quadrangle and the publication of more comprehensive reports on the two quadrangles

California↗
USGS1999

Environmental characteristics of clays and clay mineral deposits

Clays and clay minerals have been mined since the Stone Age; today they are among the most important minerals used by manufacturing and environmental industries. The U.S. Geological Survey (USGS) supports studies of the properties of clays, the mechanisms of clay formation, and the behavior of clays during weathering. These studies can tell us how and where these minerals form and provide industry and land-planning agencies with the information necessary to decide how and where clay and clay mineral deposits (fig. 1) can be developed safely with minimal effects on the environment. The term "clay" is applied both to materials having a particle size of less than 2 micrometers (25,400 micrometers = 1 inch) and to the family of minerals that has similar chemical compositions and common crystal structural characteristics (Velde, 1995) described in the next section. Clay minerals have a wide range of particle sizes from 10's of angstroms to millimeters. (An angstrom ( ) is a unit of measure at the scale of atoms.) Thus, clays may be composed of mixtures of finer grained clay minerals and clay-sized crystals of other minerals such as quartz, carbonate, and metal oxides. Clays and clay minerals are found mainly on or near the surface of the Earth.

Information Handout↗
USGS1983

The Alaska Mineral Resource Assessment Program: Background information to accompany folio of geologic and mineral resource maps of the Ambler River quadrangle, Alaska

The Ambler River quadrangle, consisting of 14,290 km2 (5,520 mi2) in northwest Alaska, was investigated by an interdisciplinary research team for the purpose of assessing the mineral resource potential of the quadrangle. This report provides background information for a folio of maps on the geology, reconnaissance geochemistry, aeromagnetics, Landsat imagery, and mineral resource evaluation of the quadrangle. A summary of the geologic history, radiometric dates, and fossil localities and a comprehensive bibliography are also included. The quadrangle contains jade reserves, now being mined, and potentially significant resources of copper, zinc, lead, and silver.

Alaska↗
USGS1963

High-alumina kaolinitic clay in the United States, exclusive of Alaska and Hawaii

The general distribution of high-alumina kaolinitic clay deposits in the United States (exclusive of Alaska and Hawaii) is shown on the accompanying map. The locations of mines, pits, and prospects are shown by appropriate symbols. Certain clay-bearing areas are shown by patterns that designate the geologic age of the deposits. The locations are numbered consecutively by states and are keyed to an index which lists the name of the deposit, county, and principal references. Only significant references on the size, quality, and geologic occurrence of deposits are listed. Some of the data for the map and index were compiled by John W. Hosterman and the late Leona Boardman.

Mineral Investigations Resource Map↗
USGS2014

A geochemical perspective of Red Mountain: an unmined volcanogenic massive sulfide deposit in the Alaska Range

The U.S. Geological Survey (USGS) has investigated the environmental geochemistry of a group of unmined volcanogenic massive sulfide (VMS) deposits in the Bonnifield mining district, Alaska Range, east-central Alaska. The spectacularly colored Red Mountain deposit is the best exposed of these and provides excellent baseline geochemical data for natural environmental impacts of acidic rock drainage, metal dissolution and transport, and acidic salt and metal precipitation from an exposed and undisturbed VMS deposit.

Alaska↗
USGS2015

Bedrock geologic map of the Spring Valley, West Plains, and parts of the Piedmont and Poplar Bluff 30'x60' quadrangles, Missouri, including the upper Current River and Eleven Point River drainage basins

This map covers the drainage basins of the upper Current River and the Eleven Point River in the Ozark Plateaus physiographic province of southeastern Missouri. The two surface drainage basins are contiguous in their headwaters regions, but are separated in their lower reaches by the lower Black River basin in the southeast corner of the map area. Numerous dye-trace studies demonstrate that in the contiguous headwaters areas, groundwater flows from the Eleven Point River basin into the Current River basin. Much of the groundwater discharge of the Eleven Point River basin emanates from Big Spring, located on the Current River. This geologic map and cross sections were produced to help fulfill a need to understand the geologic framework of the region in which this subsurface flow occurs. The map includes all of the Ozark National Scenic Riverways, a national park created by an Act of Congress in 1964 to protect 134 miles of the Current and Jacks Fork Rivers in south-central Missouri. Located within the park are numerous large springs, including Big Spring, the largest spring in Missouri and one of the ten largest springs in the world. Also within the map area is Greer Spring, which is the main source of the Eleven Point River. Greer Spring is the largest spring on National Forest land in the United States. During flood, flow from Greer Spring is almost as large, volumetrically, as that from Big Spring. The Wild and Scenic Rivers Act in 1968 established a 44-mile section of the Eleven Point River as the Eleven Point National Scenic River, which is entirely within the boundaries of this map. Potentially economic mineral resources are present in the subsurface in the map area. Exploration drill-hole data indicate that anomalously high concentrations of base-metal sulfides locally occur within the Cambrian Bonneterre Formation. The geologic setting of these anomalous concentrations is similar to that found in the Viburnum Trend, part of the largest lead-mining district in the world. The southernmost part of the Viburnum Trend extends into the northern part of the map area and is exploited by the Sweetwater Mine. Undeveloped and potentially economic occurrences of base metals are known also beneath Blair Creek, a tributary to the Current River in the north-central part of the map area.

Missouri↗
USGS1997

Geologic setting and characteristic of mineral deposits in the central Wasatch Mountains, Utah

Base- and precious-metal deposits in the central Wasatch Mountains southeast of Salt Lake City were mined for more than 100 years beginning in 1868. Deposits present in the Park City, Little Cottonwood, and Big Cottonwood mining districts include Ag-Pb-Zn ± Cu ± Au replacements and veins, a low-grade porphyry Cu-Au deposit, Cu-bearing skarns, a quartz monzonite-type (low F) porphyry Mo deposit, and high sulfidation (quartz-alunite) Au deposits. Most production came from polymetallic replacement and vein deposits in the Park City mining district, which has a recorded production of more than 1.4 million oz Au, 253 million oz Ag, 2.7 billion lbs Pb, 1.5 billion lbs Zn, and 129 million lbs Cu from 1872 to 1978. Production in the Little and Big Cottonwood districts, mostly from Pb-Ag replacement deposits, was much smaller. Most mineral deposits in the central Wasatch Mountains are genetically related to the Wasatch igneous belt, a series of high-K calc-alkaline stocks and cogenetic volcanic rocks that formed about 41(?) to 30 Ma. The mineral deposits mostly formed near the end of magmatic activity between about 36 to 31.4 Ma. A subeconomic porphyry Mo deposit in the Little Cottonwood stock is notably younger having formed about 26 to 23.5 Ma. The intrusive rocks were emplaced mostly along the westward extension of the west-trending Uinta arch during a period of NW-SE-directed extension, and much of the mineralization in the Park City district was controlled by ENE-striking normal faults. About 15 degrees of eastward tilting of the central Wasatch Mountains during Late Cenozoic Basin and Range extension has resulted in progressively deeper levels of exposure from <1 km on the east to about 11 km on the west and in profound variations in the types of mineral deposits exposed in different parts of the range. Most deposits formed at paleodepths ≤5 km, and the most productive deposits in the Park City district formed at depths of 1 to 2 km. The porphyry Mo deposit in the Little Cottonwood stock formed at greater depths of about 6 km.

Utah↗
USGS2010

Evolution of Ore Deposits and Technology Transfer Project: Isotope and Chemical Methods in Support of the U.S. Geological Survey Science Strategy, 2003-2008

Principal functions of the U.S. Geological Survey (USGS) Mineral Resources Program are providing assessments of the location, quantity, and quality of undiscovered mineral deposits, and predicting the environmental impacts of exploration and mine development. The mineral and environmental assessments of domestic deposits are used by planners and decisionmakers to improve the stewardship of public lands and public resources. Assessments of undiscovered mineral deposits on a global scale reveal the potential availability of minerals to the United States and other countries that manufacture goods imported to the United States. These resources are of fundamental relevance to national and international economic and security policy in our globalized world economy. Performing mineral and environmental assessments requires that predictions be made of the likelihood of undiscovered deposits. The predictions are based on geologic and geoenvironmental models that are constructed for the diverse types of mineral deposits from detailed descriptions of actual deposits and detailed understanding of the processes that formed them. Over the past three decades the understanding of ore-forming processes has benefited greatly from the integration of laboratory-based geochemical tools with field observations and other data sources. Under the aegis of the Evolution of Ore Deposits and Technology Transfer Project (referred to hereinafter as the Project), a 5-year effort that terminated in 2008, the Mineral Resources Program provided state-of-the-art analytical capabilities to support applications of several related geochemical tools to ore-deposit-related studies. The analytical capabilities and scientific approaches developed within the Project have wide applicability within Earth-system science. For this reason the Project Laboratories represent a valuable catalyst for interdisciplinary collaborations of the type that should be formed in the coming years for the United States to meet its natural-resources and natural-science needs. This circular presents an overview of the Project. Descriptions of the Project laboratories are given first including descriptions of the types of chemical or isotopic analyses that are made and the utility of the measurements. This is followed by summaries of select measurements that were carried out by the Project scientists. The studies are grouped by science direction. Virtually all of them were collaborations with USGS colleagues or with scientists from other governmental agencies, academia, or the private sector.

Circular↗
USGS2007

Landscape geochemistry near mineralized areas of eastern Alaska: Chapter H in Recent U.S. Geological Survey studies in the Tintina Gold Province, Alaska, United States, and Yukon, Canada--results of a 5-year project

The Pogo lode gold deposit was discovered in eastern Alaska in the early 1990s and provided the opportunity to study elemental distribution and mobility in the natural environment prior to mine development. Studying mineralized systems prior to mining allows us to compare the natural biogeochemical signature in mineralized versus nonmineralized areas. The resultant data and interpretation also provide a baseline for evaluating what, if any, changes in elemental distribution result from development. This report investigates the chemistry of stream water, streambed sediment, and soil in the context of regional bedrock geology. The major-ion chemistry of the waters reflects a rock-dominated aqueous system, and the waters are classified as Ca 2+ and Mg 2+ - HCO 3 - to Ca 2+ and Mg 2+ - SO 4 -2 waters. Creeks draining the gneissic lithologies tend to be more sulfate dominated than those draining the intrusive units. Sulfate also dominated creeks draining mineralized areas; however, the underlying paragneiss unit could be contributing substantially to the sulfate concentration, and the sulfate concentration in these creeks may reflect a complex baltholith-paragneiss boundary rather than mineralization. Arsenic concentrations in bed sediments were elevated in mineralized areas relative to nonmineralized areas. Elevated concentrations of nickel, chromium, iron, manganese, and cobalt appear to reflect the presence of ultramafic rocks in the drainage. In general, aqueous metal concentrations were below the State of Alaska’s Aquatic Life Criteria and Drinking Water Standards, with the exception of arsenic in stream water, which ranged in concentration from less than 1 to 14 micrograms per liter (&mu;g/L) and exceeded the drinking water standard at one site. The arsenic and antimony concentration in the A, B, and C soil horizons ranged from 3 to 410 milligrams per kilogram (mg/kg), 6.1 to 440 mg/kg, and 2 to 300 mg/kg, respectively, for arsenic and 0.4 to 24 mg/kg, 0.6 to 25 mg/kg, and 0.2 to 16 mg/kg, respectively, for antimony. The arsenic and antimony concentrations in stream waters correlate well with the concentrations in soils. However, significantly less arsenic and antimony was extracted from C horizon soils in water leaching experiments, indicating that the arsenic and antimony in the C horizon is present in a less available form than in the A or B horizons. Arsenic and antimony uptake by grayleaf willow (Salix glauca L.) appears minimal, with arsenic concentrations ranging from less than 0.01 to 0.14 mg/kg and antimony concentrations ranging from less than 0.003 to 0.23 mg/kg in willow leaves. In general, the highest concentrations of both arsenic and antimony in water and soils were found near mineralized areas. Elevated arsenic concentrations were also found in bed sediments from mineralized areas. In these sample matrices, the presence of arsenic and (or) antimony was a good indicator of contact with mineralized rock units.

Alaska;Yukon↗
USGS1995

Geologic and societal factors affecting the international oceanic transport of aggregate

Crushed stone and sand and gravel are the two main sources of natural aggregate, and together comprise approximately half the volume and tonnage of mined material in the United States. Natural aggregate is a bulky, heavy material without special or unique properties, and it is commonly used near its source of production to minimize haulage cost. However, remoteness is no longer an absolute disqualifier for the production of aggregate. Today interstate aggregate routinely is shipped hundreds of kilometers by rail and barge. In addition, during 1992, the United States imported 1,317,000 metric tons of aggregate from Canada and 1,531,000 metric tons from Mexico. A number of ports on the Atlantic Coast and Gulf Coast of the United States receive imports of crushed stone from foreign sources for transport to various parts of the eastern United States. These areas either lack adequate supplies of aggregate or are augmenting their supplies because they have difficulties meeting current demand. These difficulties may include poor stone quality, environmental permitting problems, or transportation. Certain societal and geologic conditions of New York City and Philadelphia along the Atlantic Coast, and Tampa and New Orleans along the Gulf Coast, are discussed to demonstrate the different combinations of issues that contribute to the economic viability of importing crushed stone. ?? 1995 Oxford University Press.

Nonrenewable Resources↗
USGS1997

Detection of underground voids in Ohio by use of geophysical methods

Geophysical methods are generally classified as electrical, potential field, and seismic methods. Each method type relies on contrasts of physical properties in the subsurface. Forward models based on the physical properties of air- and water-filled voids within common geologic materials indicate that several geophysical methods are technically feasible for detection of subsurface voids in Ohio, but ease of use and interpretation varies widely between the methods. Ground-penetrating radar is the most rapid and cost-effective method for collection of subsurface data in areas associated with voids under roadways. Electrical resistivity, gravity, or seismic reflection methods have applications for direct delineation of voids, but data-collection and analytical procedures are more time consuming. Electrical resistivity, electromagnetic, or magnetic methods may be useful in locating areas where conductive material, such as rail lines, are present in abandoned underground coal mines. Other electrical methods include spontaneous potential and very low frequency (VLF); these latter two methods are considered unlikely candidates for locating underground voids in Ohio. Results of ground-penetrating radar surveys at three highway sites indicate that subsurface penetration varies widely with geologic material type and amount of cultural interference. Two highway sites were chosen over abandoned underground coal mines in eastern Ohio. A third site in western Ohio was chosen in an area known to be underlain by naturally occurring voids in lime stone. Ground-penetrating radar surveys at Interstate 470, in Belmont County, Ohio, indicate subsurface penetration of less than 15 feet over a mined coal seam that was known to vary in depth from 0 to 40 feet. Although no direct observations of voids were made, anomalous areas that may be related to collapse structures above voids were indicated. Cultural interference dominated the radar records at Interstate 70, Guernsey County, Ohio, where coal was mined under the site at a depth of about 50 feet. Interference from overhead powerlines, the field vehicle, and guardrails complicated an interpretation of the radar records where the depth of penetration was estimated to be less than 5 feet. Along State Route 33, in Logan County, Ohio, bedding planes and structures possibly associated with dissolution of limestone were profiled with ground-penetrating radar. Depth of penetration was estimated to be greater than 50 feet.

Water-Resources Investigations Report↗
USGS2016

Recent trends in the nonfuel minerals industry of Iran

Summary In response to the recent removal of international sanctions on Iran, including the lifting of &ldquo;secondary&rdquo; sanctions by the United States on investment into and trade with Iran, the U.S. Geological Survey National Minerals Information Center compiled and analyzed available information on the current state of Iran&rsquo;s nonfuel minerals industry. This Circular features a new map and table that identify existing mines and mineral-processing facilities and provide information on location, ownership, and capacity for metals and industrial minerals whose output levels may substantially change in the near future. Additionally, the report covers Iran&rsquo;s mineral resources and reserves, official mineral production targets for 2025, and current output and share of global mineral production. Recent trends and developments in individual mineral commodities are discussed, including mineral exploration and partnerships with foreign investors. The U.S. Geological Survey estimated that Iran held globally significant reserves of feldspar (2d largest in the world), barite (5th largest), gypsum (5th largest), fluorspar (8th largest), and iron ore (10th largest). The Government of Iran claimed to also have significant reserves of chromium, copper, gold, manganese, phosphate rock, and zinc. In 2014, Iran was the second-leading producer of gypsum and the sixth-leading producer of barite, with 6.1 percent and 3.6 percent of world output, respectively. Iran was also the world&rsquo;s 7th-leading producer of cement, feldspar, and fluorspar; 8th-leading producer of bentonite; 9th-leading producer of molybdenum; 11th-leading producer of iron ore; and 14th-leading producer of crude steel. The Government of Iran plans to quadruple the output of aluminum, copper cathode, direct-reduced iron, and iron ore pellets; triple that of crude steel and gold; and double that of cement, pig iron, and zinc by 2025. It also plans to double the contribution of mining and to quadruple that of mineral processing to the national economy in the next decade. In order to achieve these major goals, the construction and expansion of several mines and mineral facilities are planned or under development. Whether Iran&rsquo;s annual mineral production increases as rapidly as envisioned by the Government will depend largely on the amount of foreign investment into the minerals industry; integration of modern technology into mineral facilities; and availability of energy to aluminum, copper, and steel plants at competitive prices to international investors.

Circular↗
USGS1993

The Hatu gold anomaly, Xinjiang-Uygur Autonomous Region, China - testing the hypothesis of aeolian transport of gold

In 1987, a cooperative project between the U.S. Geological Survey and the Institute of Geophysical and Geochemical Exploration was initiated to evaluate the origin of the Hatu gold anomaly. The anomaly is located in the Hatu mining district in the northwest corner of Xinjiang-Uygur Autonomous Region in northwest China. The climate is semiarid to arid and wind erosion predominates. A regional soil survey of the Hatu district, based on samples collected on a 200 by 500 m grid and composited prior to chemical analysis to a density of one sample per square km, delineated a series of south-southeast-trending Au anomalies. Anomalous Au values range from 5 ppb to more than 700 ppb. The Hatu anomaly, the most prominent of these anomalies, is more than 30 km long and about 5 km wide. The mining town of Hatu and the economic gold deposits of Qiqu 1 and Qiqu 2 are at the northern end of this anomaly. The axis of the Hatu anomaly cuts across mapped structure and stratigraphy in the district, but is parallel to the prevailing wind direction. This observation led to the hypothesis that the Hatu anomaly is the result of acolian dispersion of gold from the vicinity of Qiqu 1 and Qiqu 2. The alternative interpretation, that the anomalies reflected additional primary gold occurrences, was not consistent with existing information on the known occurrences and the geology.

Journal of Geochemical Exploration↗
USGS1985

Effects of surface coal mining and reclamation on ground water in small watersheds in the Allegheny Plateau, Ohio

The hydrologic effects of surface coal mining in unlimited areas is difficult to predict, partly because of a lack of adequate data collected before and after mining and reclamation. In order to help provide data to assess the effects of surface mining on the hydrology of small basins in the coal fields of the eastern United States, the U.S. Bureau of Mines sponsored a comprehensive hydrologic study at three sites in the Ohio part of the Eastern Coal Province. These sites are within the unqlaciated part of the Allegheny Plateau, and are representative of similar coal-producing areas in Kentucky, West Virginia, and Pennsylvania. The U.S. Geological Survey was responsible for the ground-water phase of the study. The aquifer system at each watershed consisted of two localized perched aquifers (top and middle) above a deeper, more regional aquifer. The premining top aquifer was destroyed by mining in each case, and was replaced by spoils during reclamation. The spoils formed new top aquifers that were slowly becoming resaturated at the end of the study period. Water levels in the aquifers were about the same after reclamation as before mining, although levels rose in a few places. It appears that the underclay at the base of the new top aquifers at all three sites prevents significant downward leakage from the top aquifers to lower except in places where the layer may have been damaged during mining. Water in the top aquifers is a calcium sulfate type, whereas calcium bicarbonate type water predominated before mining. The median specific conductance of water in the new top aquifers was about 5 times greater than that of the original top aquifers in two of the watersheds, and 1 1/2 times the level of the original top aquifers in the third. Concentrations of dissolved sulfate, iron, and manganese in the top aquifers before mining generally did not exceed U.S. and Ohio Environmental Protection Agency drinking-water limits, but generally exceeded these limits after reclamation. Water-quality changes in the middle aquifers were minor by comparison. Water levels and water quality in the deeper, regional aquifers were unaffected by mining.

Water-Resources Investigations Report↗
USGS1953

Geology of carnotite-bearing sandstone in the Uravan and Gateway districts, Montrose and Mesa counties, Colorado, and Grand County, Utah

Most of the caraotite deposits in the Uravan and Gateway mining districts ate in the persistent upper sandstone stratum of the Salt Wash sandstone member of the Morrison formation, Areas In which this stratum is predominantly lenticular have been delimited from areas in which this stratum is predominantly nonlenticularar. Ground most favorable for carnotite deposits is in areas of lenticular sandstone where the stratum is underlain by green-gray altered mudstone. Ore is localized in scour-and-fill bedded sandstones within favorable areas of lenticular sandstone. Regional control of the movement of ore-bearing solutions in the persistent ore-bearing sandstone stratum is indicated by; 1. A concave arcuate belt of partly altered mudstone transitional between areas of unaltered mudstone to the west and areas of altered mudstone to the east; 2. An increase in size, grade, and number of ore deposits from areas of partly altered to altered mudstone.

Colorado;Utah↗
USGS2011

A geologic and anthropogenic journey from the Precambrian to the new energy economy through the San Juan volcanic field

The San Juan volcanic field comprises 25,000 km 2 of intermediate composition mid-Tertiary volcanic rocks and dacitic to rhyolitic calderas including the San Juan&ndash;Uncompahgre and La Garita caldera-forming super-volcanoes. The region is famous for the geological, ecological, hydrological, archeological, and climatological diversity. These characteristics supported ancestral Puebloan populations. The area is also important for its mineral wealth that once fueled local economic vitality. Today, mitigating and/or investigating the impacts of mining and establishing the region as a climate base station are the focuses of ongoing research. Studies include advanced water treatment, the acid neutralizing capacity (ANC) of propylitic bedrock for use in mine-lands cleanup, and the use of soil amendments including biochar from beetle-kill pines. Biochar aids soil productivity and revegetation by incorporation into soils to improve moisture retention, reduce erosion, and support the natural terrestrial carbon sequestration (NTS) potential of volcanic soils to help offset atmospheric CO 2 emissions. This field trip will examine the volcano-tectonic and cultural history of the San Juan volcanic field as well as its geologic structures, economic mineral deposits and impacts, recent mitigation measures, and associated climate research. Field trip stops will include a visit to (1) the Summitville Superfund site to explore quartz alunite-Au mineralization, and associated alteration and new water-quality mitigation strategies; (2) the historic Creede epithermal-polymetallic&ndash;vein district with remarkably preserved resurgent calderas, keystone-graben, and moat sediments; (3) the historic mining town of Silverton located in the nested San Juan&ndash;Silverton caldera complex that exhibits base-metal Au-Ag mineralization; and (4) the site of ANC and NTS studies. En route back to Denver, we will traverse Grand Mesa, a high NTS area with Neogene basalt-derived soils and will enjoy a soak in the geothermal waters of the Aspen anomaly at Glenwood Springs.

Colorado↗