Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Agricultural, Biological and Environmental Statistics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,689 records · Page 61Linked to original sources
USGS2026

A targeted approach for mapping groundwater discharge to surface water and fish thermal refuge in four Lake Ontario tributaries

The duration, magnitude, and frequency of heatwaves are predicted to increase in the coming decades, a combination that can reduce the survival of many fish species. Across the world, there is broad interest in identifying thermal refuge for heat-intolerant fish species and exploring opportunities to enhance or protect these areas. Because deeper groundwater maintains a relatively constant temperature, groundwater-influenced areas along streams can provide cool-water refuge for fish during periods of extreme heat. A targeted approach was developed for identifying existing cold-water zones and areas of substantial groundwater discharge in four high priority Lake Ontario tributaries. Our approach included: (1) predicting where groundwater discharge is most likely with a simple geospatial model and (2) using model predictions to select field sites for intensive high-resolution study, including ground-based mapping of groundwater features (springs, seeps, tributaries) as well as drone-based optical and thermal infrared surveys. Results from field sites were used to both verify model performance and map different types and aerial extents of thermal anomalies. Geospatial modelling successfully predicted regions of widespread groundwater upwelling, later verified and mapped by field and drone surveys. Comparison of model and field survey results further highlighted specific geospatial layers, such as soil/bedrock types and topographic wetness index, as being particularly useful for predicting groundwater influence on streams in the study area. In addition, a comparison of geospatial model results with a model of fish abundances along the studied streams showed significant positive correlations for many heat-intolerant fish species over a wide geographic area. The approach developed in this study can be applied to other watersheds to highlight areas of probable groundwater discharge and could be used by fishery and water resource managers to support cold-water fish habitat management decision-making and resource conservation.

New York↗
USGS2024

Case definitions for wildlife diseases

Welcome to the first manual of “Case Definitions for Wildlife Diseases,” a “living” electronic publication. The plan is to add and update this manual’s case definitions periodically as warranted; thus, this manual will never be completed, and readers should download the latest versions of specific chapters (that is, definitions) when available. Constructive suggestions from readers are welcome and will help guide adjustments as this project progresses. The purpose of this manual is to provide case definitions for selected diseases of importance to wildlife in Canada and the United States. Case definitions provide standard sets of criteria for classifying the degree of certainty of a particular diagnosis and help improve surveillance data quality and comparability. Better data and standardization allow for improved data sharing, which increases geographic and species surveillance coverage and permits more robust analyses. The definitions included in this manual have been developed by veterinary pathologists, epidemiologists, and wildlife biologists primarily from the U.S. Geological Survey National Wildlife Health Center (NWHC) and Canadian Wildlife Health Cooperative (CWHC). Pathologists from each organization reviewed and finalized the definitions. Each case definition has been peer reviewed by two scientific experts before publication. This manual begins with the case definition template. This generic template includes four sections: “Individual, Place, and Time Criteria for Diagnosis and Testing,” “Field Criteria for Diagnosis,” “Laboratory Criteria for Diagnosis,” and “Epidemiological Linkage Criteria for Diagnosis” and can be used to guide development of new case definitions. Information in each section is then combined to provide an overall case classification. Disease diagnoses are classified as “Confirmed,” “Presumptive,” or “Suspected;” and evidence of a pathogen or toxin is classified as “Exposed” or “Present/Detected.” Each subsequent chapter is then a case definition for a specific disease of wildlife, and infectious and non-infectious diseases are included.

Techniques and Methods↗
USGS2025

Flood-inundation maps for 14.8 miles of Little and Big Papillion Creeks in Omaha, Nebraska, 2023

Digital flood-inundation map libraries for two reaches that constitute 14.8 miles of Little and Big Papillion Creeks in Omaha, Nebraska, were created by the U.S. Geological Survey (USGS) in cooperation with the Papio-Missouri River Natural Resource District. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Program website at https://www.usgs.gov/mission-areas/water-resources/science/flood-inundation-mapping-fim-program , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at Little Papillion Creek at Irvington, Nebr. (USGS station 06610750), Little Papillion Creek at Ak-Sar-Ben at Omaha, Nebr. (USGS station 06610765), and Big Papillion Creek at Q Street at Omaha, Nebr. (USGS station 06610770) streamgages. Near-real-time stages at these streamgages may be obtained from the USGS National Water Information System database at https://doi.org/10.5066/F7P55KJN or from the National Weather Service Advanced Hydrologic Prediction Service at https://water.weather.gov/ahps/ . Flood profiles were computed for two different reaches that constitute 14.8 miles of stream length in the study area by using hydraulic models. The models were calibrated by adjusting roughness coefficients to best represent the current (2022) stage-streamflow relation at the streamgages within the study reach. The hydraulic models were then used to compute water-surface profiles at 1-foot stage intervals for selected stage ranges to represent various flooding scenarios at the streamgages in each reach. The simulated water-surface profiles then were combined with a digital elevation model using a geographic information system, which had a 10-foot grid spacing to delineate the flooding extents and water depths for each stage. The availability of these flood-inundation maps, along with information regarding current stage from the USGS streamgages, can provide emergency management personnel and residents with information that is critical for flood response activities and post flood recovery efforts.

Nebraska↗
USGS2024

Introduction to recommended capabilities and instrumentation for volcano monitoring in the United States

Introduction The National Volcano Early Warning System (NVEWS) was authorized and partially funded by the U.S. Government in 2019. In response, the U.S. Geological Survey (USGS) Volcano Hazards Program asked its scientists to reflect on and summarize their views of best practices for volcano monitoring. The goal was to review and update the recommendations of a previous report (Moran and others, 2008) and to provide a more detailed analysis of capabilities and instrumentation for monitoring networks for U.S. volcanoes. This Scientific Investigations Report and its chapters reflect those USGS scientists’ views and summaries and will serve as a guide for future network upgrades funded through NVEWS. Given the well-documented hazards posed by volcanoes to population centers and aviation (for example, Blong, 1984; Scott, 1989; Neal and others, 1997, 2019; Guffanti and others, 2010; Shroder and Papale, 2014; Prata and Rose, 2015; Palmer, 2020), volcano monitoring is critical for ensuring public safety and for mitigating the impacts of volcanic activity. Accurate and timely forecasts are facilitated by well-designed monitoring networks that are in place long enough to allow for background behavior to be recognized and understood. Because precursory signals may be limited and unrest may progress rapidly to an eruption, our goal is to deploy monitoring systems that enable detection of the reactivation of dormant volcanoes as early as possible, allowing for public safety and risk mitigation. NVEWS planning is also informed by the results of Ewert and others (2005, 2018), whereby 161 U.S. volcanoes are currently categorized and ranked commensurate with their relative threat. In each chapter, author(s) considered the need for some redundancy of instrumentation and telemetry, given the likelihood of occasional equipment failure, particularly in extreme and remote environments. Establishing digital telemetry networks requires advanced planning, sighting, radio-shot testing, and, inevitably, troubleshooting in the field. This is harder to achieve rapidly during a crisis; thus, an important goal for monitoring U.S. volcanoes is to establish digital telemetry backbones with redundancy and extra capacity to absorb additional instruments should a volcano begin to exhibit signs of unrest (fig. A1). The National Telecommunications and Information Administration (NTIA) imposed new regulations in the United States, eliminating the use of older analog radios for many purposes, which had been one previous means for redundant data delivery. However, the resulting conversion from analog to digital systems usefully enables stations to accommodate new and multivariate real-time data streams (for example, Global Navigation Satellite System [GNSS] receivers, infrasound arrays, gas spectrometers, visible and infrared cameras, and broadband seismometers). We note that other USGS and broader national and international hazard programs can leverage NVEWS instrumentation plans. Examples of this include the following: Improved seismic coverage of volcanoes will increase the capability of the USGS Earthquake Hazards Program to detect and locate earthquakes, estimate ground shaking, and provide timely early warnings through the ShakeAlert Earthquake Early Warning System (Given and others, 2018). The National Oceanic and Atmospheric Administration’s Tsunami Program will benefit from additional seismic stations, particularly within the sparsely instrumented Aleutian Islands, Northern Mariana Islands, and American Samoa. Infrasound stations can detect signals from landslides, debris flows and lahars, floods, and weather events, providing benefits to the National Weather Service and the USGS Landslide Hazards Program.

Scientific Investigations Report↗
USGS2024

Substrate Enhancement Pilot Project—Monitoring summary and evaluation, Kootenai River, Idaho, 2012–22

To assess changes in substrate conditions and the efficacy of artificially placed substrates at select sites on the Kootenai River near Bonners Ferry, Idaho, the U.S. Geological Survey, in cooperation with the Kootenai Tribe of Idaho, completed repeat bathymetric, velocimetric, and underwater videography surveys. Collectively, three project sites throughout the Kootenai River make up the Substrate Enhancement Pilot Project (SEPP), an effort intended to improve spawning and egg incubation viability at locations identified to be aquatic habitat limited for the endangered Kootenai River white sturgeon (Acipenser transmontanus). Following the placement of coarse substrates at each site, bathymetric, velocimetric, and underwater videography data were collected from 2012 to 2022 to assess the role of deposition and erosion on maintaining suitable white sturgeon spawning and incubation substrates. Minimal erosion and deposition occurred at all Substrate Enhancement Pilot Project sites, according to interannual and intra-annual net volumetric changes between bathymetric surveys. Depending on the timing of bathymetric surveys relative to the annual peak streamflow conditions, isolated locations of deposition or erosion were observed at each site and the potential for deposition or erosion was supported by measured mean depth-averaged velocities. This study concluded that variability of deposition and scour were common at each site throughout the monitoring period and may be attributed to fluctuations in streamflow. Repeat bathymetric, underwater videography, and velocity mapping surveys were used to verify the interstitial spaces and surfaces of substrates at each SEPP site remained free of fine sediments for intervals longer than a year but were susceptible to deposition between high streamflow events.

Idaho↗
USGS2024

Potentially toxic elements in wild Agassiz’s desert tortoises: Tissue concentrations and association with disease

Background: Desert tortoise ( Gopherus agassizii ) populations have continued to decline due to infectious and other diseases, predation, and habitat alteration. The potential contribution of minerals and heavy metals to tortoise health and susceptibility to disease remains uncertain. Objective: The objective of this study was to evaluate the results of elemental analysis of trace minerals and macrominerals in scute keratin, kidney, and liver tissue from ill and dying desert tortoises salvaged for necropsy between 1993 and 2000. Methods: Salvaged tortoises were categorized by age (adult, juvenile), geographic location, and primary disease based on necropsy findings. A subset of tortoises that were injured or killed by vehicular trauma or predation but with no notable pathologic abnormalities were used as controls. A panel of 21 trace minerals and 6 macrominerals was analyzed in scute keratin, kidney, and liver tissue samples by inductively-coupled plasma spectrometry and atomic absorption spectrophotometry. Results: Necropsies were done on 46 tortoises, including 9 juveniles salvaged from 5 regions in the Colorado and Mojave deserts of California. Primary diseases were cutaneous dyskeratosis (n=9), infection/ inflammation (n=8), malnutrition (n=7), mycoplasmosis (n=5), and urolithiasis (n=3); 14 tortoises were classified as controls. Concentrations of elements differed significantly by tissue, age, desert region, and disease (P < 0.05). Tortoises with cutaneous dyskeratosis had significantly higher Se concentrations, primarily in keratin and liver, than tortoises with other diseases (P < 0.001). Juveniles were more likely than adults to have high Pb, Sn, and Zn levels (P < 0.05). All tortoises had detectable levels of more than one potentially toxic heavy metal, including As, Cd, Cr, Hg, Ni, Pb, Sn and V. Conclusions: Potentially toxic elements are frequently found in tissue from tortoises in desert regions of California, with significantly higher concentrations in diseased tortoises. Metal exposure from soils, mining, historic and ongoing military activities, and other human activities could increase susceptibility to disease in desert tortoises.

California↗
USGS2024

Geophysical modeling of a possible blind geothermal system near Battle Mountain, NV

The northeastern portion of the Reese River basin in north-central Nevada is the focus of detailed geophysical and geological studies as part of the INGENIOUS project, which aims to identify new, commercially viable hidden geothermal systems in the Great Basin region of the western U.S. This location, herein referred to as Argenta Rise, occupies a broad (~15km wide) left-step between major range-front fault systems along the northwestern edge of the Shoshone Range and Argenta Rim, with numerous ENE-striking intra-basin faults presumably accommodating sinistral-normal oblique slip across the step-over. Four discrete regions have been identified within the study area that have favorable structural settings for hosting a blind hydrothermal system. However, with no definitive or extensive surface manifestations of an active hydrothermal system (e.g., geysers, steam vents, sinter, etc.), detailed geophysical studies are necessary to resolve subsurface geology and structure, and identify zones of enhanced structural complexity that may promote hydrothermal fluid flow. Hence, we collected high-resolution gravity, MT, and rock property data (density, magnetic susceptibility), and analyzed the recently acquired GeoDAWN aeromagnetic data to characterize potential geothermal resources in this region. Using the new geophysical datasets, we jointly modeled gravity and magnetic data along a series of intersecting 2D profiles that integrated information from recent, local-scale fault mapping. Rock property measurements performed on outcrops and hand samples throughout the study area constrained the models. The MT data were used to construct a 3D resistivity model that highlights the location of inferred alteration and fluids in the subsurface. Combined MT and potential field results reveal which structures may be most important for controlling hydrothermal fluid migration, as well as which geologic units may host hydrothermal fluids. Our gravity derived depth to basement surface coincides well with the base of shallow conductive anomalies, suggesting hydrothermal fluids may be confined to basin fill sediments and volcanics. This work supports our development of 3D geophysical and geologic models that are focused along the western flank of the northern Shoshone Range and aids the process of selecting sites for temperature gradient drilling.

Nevada↗
USGS2025

James Buttle review: The characteristics of baseflow resilience across diverse ecohydrological terrains

The dynamic storage of aquifers is the portion of groundwater that can potentially drain to any given point along a stream to create baseflow. Baseflow typically occurs year-round in perennial streams, though the characteristics and stability of dynamic storage are often most important to instream processes during extended dry periods (without precipitation and snowmelt) when runoff and quickflows are minimised. The term ‘baseflow resilience’ is defined for this review as the tendency of baseflow in streams to maintain a consistent volume and water quality year to year while under stress from climate variability and extremes, along with anthropogenic stressors such as water withdrawals, land use change, and water quality degradation. ‘Baseflow resilience’ has, in part, a user-defined meaning spanning water supply and water quality variables of primary interest. Watershed characteristics that directly impact resilience can often produce non-intuitive feedbacks that enhance some attributes of baseflow while simultaneously impairing others. For example, permeable stream corridor geology creates strong stream-groundwater hydrologic connectivity, yet fast groundwater drainage via preferential high-permeability flowpaths can lead to streamflow not being sustained during extended dry periods. Also, shallow groundwater sources are generally more immediately vulnerable to extreme events, warming, salinization, transpiration, and precipitation drought, compared to deeper groundwater. Yet baseflow drought in streams influenced by deeper groundwater can lag precipitation drought by years, and contaminant legacies may propagate through deep groundwater flowpaths to receiving waters for decades to centuries. Finally, irrigation withdrawals can intercept groundwater that would have drained to streams, and the application of irrigation may leach contaminants from the soil zone by unnaturally raising water tables, yet irrigation return flows can sustain baseflow and groundwater-dependent habitats in semiarid areas. This review covers the concept of hydrologic resilience in the context of stream baseflow processes and summarises the common hydrogeological controls on, and multiscale stressors of, dynamic groundwater storage. Further, we present several quantitative metrics to assess a range of water supply to water quality baseflow characteristics using both broadly available and boutique data types, a subset of which are demonstrated using data from the Delaware River Basin, USA.

Delaware River Basin↗
USGS2024

The 17 January 1994 Northridge, California, earthquake: A retrospective analysis

The 17 January 1994 Northridge, California, earthquake was a watershed event, with far-reaching societal and scientific impacts. The earthquake, which occurred in the early days of both broadband seismic networks and the Internet, spurred advances in seismic monitoring, real-time systems, and development of data products. Motivated by the 30th anniversary of the earthquake, we present a brief retrospective of the earthquake and its impact, and reconsider both ground motions and the aftershock distribution using modern tools and best-available data. With improvements in instrumentation and analysis methodology, recent earthquakes continue to reveal increasing complexity of ground motions, fault systems, and earthquake ruptures. Even in the absence of data from state-of-the art instrumentation, a retrospective consideration of ground motion data from the Northridge earthquake reveals complexities beyond what could be characterized (and modeled) thirty years ago. Aftershock relocations for both the 1971 Sylmar and 1994 Northridge earthquakes also reveal an updated view of fault complexity. Our study does provide a cautionary tale regarding legacy data sets and research results that are not easily accessible, which can result in discrepancies between catalog data and products from best-available science. We also briefly describe outreach products produced as part of the anniversary commemoration.

California↗
USGS2026

Ground motions from finite faults with unknown geometry

Earthquake emergency response and loss modeling require accurate models of ground‐motion intensity metrics (IMs), such as those produced by ShakeMap. In the critical minutes and hours after an earthquake, however, knowledge of the earthquake source geometry limits the accuracy of these models, especially in areas where seismic instrumentation is insufficient to constrain the shaking intensity pattern. Previous attempts to overcome this limitation have centered on computing the mean distance metrics from a suite of assumed source geometries. That approach is inadequate with modern ground‐motion models (GMMs) because they typically include terms for the hanging wall effect, depth to top of rupture, and other nonlinear terms. Such approaches also propagate the distance uncertainty through the GMMs and may not properly allocate the additional uncertainty into the between‐ and within‐event components. Here we present Finite‐Fault SIMulation with Mixed Effects Regression (FFSIMMER), a method to address these limitations by computing IM distributions from a suite of rupture realizations that fully accounts for all geometry‐related GMM terms and allows for the separation of the between‐ and within‐event components of the total uncertainty. The accuracy of this method is limited by the available constraints on the source parameters. To address this, FFSIMMER can incorporate constraints based on knowledge of the source, such as the approximate strike and dip based on knowledge of the plate tectonics and focal mechanism of the earthquake. We demonstrate the improvement in accuracy that can be achieved with the 2025 M 7.7 Mandalay, Burma (Myanmar), earthquake by incorporating constraints on the range of plausible source parameters.

Bulletin of the Seismological Society of America↗
USGS2025

Phase 1 technical implementation plan for the expansion of the ShakeAlert earthquake early warning system to Alaska

Executive Summary The conference report accompanying the fiscal year (FY) 2022 Consolidated Appropriations Act (Public Law 117–103) for the U.S. Department of the Interior and related agencies directed the U.S. Geological Survey (USGS) to “work with the State of Alaska to develop an implementation plan to be completed within two years in order to put ShakeAlert/Earthquake Early Warning in Alaska” (p. 29). Congress included $1 million in the FY 2022 appropriation to conduct this effort. The USGS Earthquake Hazards Program, along with partner organizations, has developed the ShakeAlert earthquake early warning (EEW) system for the West Coast, which currently operates in California, Oregon, and Washington. The purpose of the system and its alert delivery partners is to reduce the impact of earthquakes and save lives and property by delivering ShakeAlert-powered alerts that are transmitted to the public via mass notification technologies, and by providing more detailed data streams to institutional users and commercial service providers to trigger automated, user-specific, protective actions. ShakeAlert was designed in such a way that it could be expanded to other U.S. regions with high earthquake risk, after the build-out of seismic and geodetic networks to support ShakeAlert in a specified region is completed and the necessary funding is secured for long-term operation and maintenance. When an earthquake occurs, seismic waves radiate from the rupturing fault like waves on a pond. It is these waves that people feel as earthquake shaking and that can cause damage to structures. Using networks of ground-motion sensors and sophisticated computer algorithms, ShakeAlert can detect an earthquake seconds after it begins, calculate its location and magnitude, and estimate the resulting intensity of shaking. Early warnings of impending shaking are then sent to people and systems that may experience damaging shaking, allowing them to take appropriate protective actions. Depending on the user’s distance from the earthquake, alerts may be delivered before, during, or after the arrival of strong shaking. There will almost always be a region near the earthquake epicenter where alerts arrive after damaging shaking has begun. The ShakeAlert system updates its ground-motion estimates as an earthquake grows larger. In response to the FY 2022 congressional direction, the USGS worked with the State of Alaska to devise this implementation plan for ShakeAlert expansion to Alaska. The USGS engaged with the Alaska Division of Homeland Security and Emergency Management (DHS&EM) and the Alaska Division of Geological and Geophysical Surveys (DGGS). A cooperative agreement was awarded to the Alaska Earthquake Center (AEC) at the University of Alaska Fairbanks (UAF) for their contributions to the plan and their work coordinating with other networks in Alaska. The USGS engaged with the Alaska Seismic Hazards Safety Commission (ASHSC) throughout the process. The USGS also held a series of Alaska stakeholder engagements. The process of developing the implementation plan was facilitated by contracted staff from Corner Alliance, which is a government consulting firm. This implementation plan describes the details and estimates the costs for a Phase 1 expansion of the ShakeAlert system to Alaska. A geographically limited Phase 1 goal was chosen that covers the highest risk and most populated areas of Alaska. The areas proposed encompass the State’s main population centers and 90 percent of the State’s population. This Phase 1 design is considered very challenging and ambitious from the viewpoint of network operators. The lessons learned if this plan is implemented could be used to consider subsequent phases to expand EEW beyond Phase 1 in Alaska in the future. ShakeAlert is built on the foundation of the sensor networks and data processing infrastructure of the USGS-led Advanced National Seismic System (ANSS). This implementation plan calls for a total of 450 high-quality, real-time EEW-capable ANSS seismic stations in Alaska: 270 new stations, 160 upgraded stations, and 20 existing stations. These seismic station numbers are based on a station spacing of 10 kilometers (km) in urban areas, 20 km in seismic source areas that endanger population centers, and 40 km in other areas. The associated costs also include support for some EEW-capable global navigation satellite system (GNSS) stations, with a focus on improving warnings for large subduction zone earthquakes. For effective EEW, ShakeAlert requires low-latency, high-availability, robust telemetry links to deliver continuous, real-time data from field stations to the data centers. The Alaska data processing hardware infrastructure would follow the general design for fail-safe operation that is used for the ShakeAlert system on the West Coast. The ShakeAlert architecture uses two independent layers: the production layer for earthquake processing and the alert layer to make alerting decisions and serve alerts to users. This implementation plan includes two geographically separated data centers in Alaska, each with two fully independent production and alert layers using the same system design developed for the West Coast. As of March 2024, the ShakeAlert system is at version 3.0.1, with more advanced versions in the development and testing pipeline. ShakeAlert originally used two algorithms to determine the location and magnitude of earthquakes using seismic data. A third algorithm that can calculate very large magnitudes of very large earthquakes with geodetic data was added in March 2024. ShakeAlert publishes several data and alert products to meet the needs of different users. All messages include the location of the earthquake, either as a point or a line, and its magnitude. Ground-shaking estimates are published in two forms, as ground-motion contours and a map grid. Providing adequate warning time for strong shaking (the “target threshold”) requires sending alerts at a threshold lower than that strong shaking level (the “alert threshold”). The thresholds for public alerting in Alaska would be a joint USGS and State decision. To have the greatest benefit, ShakeAlert-powered alerts would be delivered to institutional users and individuals by all practical pathways. The USGS alert layer can support thousands of institutional users and alert redistributors, but the USGS does not have the mission nor the infrastructure and expertise to perform mass notifications to the public or implement automatic actions for end users of the alerts. To meet this need, ShakeAlert recruits private sector “technology enablers” that have the necessary expertise to develop end-user implementations using EEW alerts with the goal of stimulating an EEW industry. Earthquake early warning alerts are useless if people do not know how to respond to them. Although the alert messages include instructions about what to do (drop, cover, and hold on), alerts are more effective if people have been trained in advance. Messages about ShakeAlert’s capabilities, limitations, and benefits could be integrated with existing earthquake education programs, including State-run programs. Therefore, ShakeAlert would coordinate with both public and private partners and stakeholders through various partnerships and agreements to accomplish consistent and ongoing public earthquake hazard education. The estimated capital cost of completing the computing infrastructure and sensor networks for the Phase 1 ShakeAlert expansion to Alaska is approximately $66 million in 2024 dollars. The annual operation and maintenance cost of the completed system is estimated to be $12 million per year in 2024 dollars when fully built out.

Alaska↗
USGS2025

REDPy: A Python tool for automated repeating earthquake detection and visualization

Detecting and cataloging seismic events are among the most fundamental tasks in seismology. Many standardized tools for these tasks exist, including the open‐source package repeating earthquake detector in Python (REDPy). REDPy generates an organized catalog of seismic events from continuous waveform data, in which events are automatically separated into groups (“families”) by their waveform similarity through cross‐correlation. REDPy also automatically generates various outputs that allow a user to visualize important trends in the catalog, which may be used in real time or in retrospective analyses to allow rapid identification of interesting features. The code was designed for near‐real‐time volcano monitoring but is applicable across a broad range of use cases in seismology and seismoacoustics. In this article, the utility and performance of REDPy are demonstrated on two highly seismogenic volcanic eruption sequences: the onset of the dome‐building eruption of Mount St. Helens, Washington, from 2004 to 2005, and the entirety of the summit caldera collapse sequence of Kīlauea, Hawai‘i, in 2018. This article is meant to be a companion to the documentation of the code; in addition to detailing the basic required inputs, script functionality, and resulting outputs, the reasonings behind several important design decisions are also discussed.

Seismological Research Letters↗
USGS2025

A glimpse into the future of tectonic tremor monitoring

Tectonic tremor is a weak, long-duration seismic signal often observed in subduction zones and on some other plate-bounding faults. Because of tremor's characteristically low amplitude (and low signal-to-noise) and lack of clear phase arrivals, detecting and locating tremor usually requires techniques distinct from those applied to typical earthquakes. Major advances in detection and understanding of tremor have derived in the past from a powerful combination of new data and new analysis techniques. In a recent study, Sagae et al. (2025, https://doi.org/10.1029/2025jb031348 ) exploit that combination again, developing a new machine-learning based workflow and applying it to the S-net cabled seismic network in the Japan trench offshore northern Honshu. Their approach, although complex, succeeds in detecting several times more tremor activity than earlier studies, resulting in new insights and providing a blueprint for similar approaches that could be applied elsewhere. As real-time earthquake monitoring adopts similar tools, it may present an opportunity to bring tremor monitoring into operational workflows. In turn, this could solidify tremor monitoring as a component of future operational earthquake forecasting.

JGR Solid Earth↗
USGS2025

Framework for assessing intranational risk of critical mineral sectors: Case study of India

Recent geopolitical actions regarding the supply of critical minerals have highlighted both the threats posed by countries dominating a critical mineral supply chain, and the potential mitigations served by alternative supplier countries. However, no systematic quantification exists for the intranational factors that determine such threats or mitigations. This study outlines a methodological framework for quantifying the intranational risk profile of critical mineral sectors and compares them with the sector's international potential for leverage. The four intranational factors of concentration, synchronization, private sector involvement, and regulatory obstacles were analyzed across multiple scales in order to determine an intranational risk score that quantifies the resilience or fragility of the critical mineral sector in question. Network analysis was also separately conducted to identify the most important entities operating across all critical mineral sectors. Finally, this study assessed the critical mineral sector's global share of reserves and production to determine an international risk score that quantifies the country's critical mineral sector's leverage potential. A case study of India showed that two critical mineral sectors with high leverage potential, chromite and barite, were respectively intranationally resilient and fragile. Of the remaining sectors with minimal leverage, five sectors such as aluminum were intranationally resilient and may serve as viable mitigation options for future critical mineral supply. Three sectors such as titanium were intranationally fragile, but recent regulatory developments may both decrease intranational risk and increase international risk, potentially making them major critical mineral sectors in the future.

Resources Policy↗
USGS2024

(Re)discovering the seismicity of Antarctica: A new seismic catalog for the southernmost continent

We apply a machine learning (ML) earthquake detection technique on over 21 yr of seismic data from on‐continent temporary and long‐term networks to obtain the most complete catalog of seismicity in Antarctica to date. The new catalog contains 60,006 seismic events within the Antarctic continent for 1 January 2000–1 January 2021, with estimated moment magnitudes (⁠Mw ⁠) between −1.0 and 4.5. Most detected seismicity occurs near Ross Island, large ice shelves, ice streams, ice‐covered volcanoes, or in distinct and isolated areas within the continental interior. The event locations and waveform characteristics indicate volcanic, tectonic, and cryospheric sources. The catalog shows that Antarctica is more seismically active than prior catalogs would indicate, examples include new tectonic events in East Antarctica, seismic events near and around the vicinity of David Glacier, and many thousands of events in the Mount Erebus region. This catalog provides a resource for more specific studies using other detection and analysis methods such as template matching or transfer learning to further discriminate source types and investigate diverse seismogenic processes across the continent.

Seismological Research Letters↗
USGS2025

Structural analysis of brittle-plastic shear zones in the Sangre de Cristo Range, southern Colorado USA: Superposition of Rio Grande rift extension on Laramide contraction

The Sangre de Cristo Range in southern Colorado exposes some of the deepest Cenozoic structural levels in the Rocky Mountain region, including mylonitic shear zones associated with both the Laramide orogeny and Rio Grande rift. We investigated the relation between Laramide contraction and Rio Grande rift extension with detailed geologic mapping, kinematic analysis, and geochronometry in a 50 km 2 area centered on the Independence Mine shear zone (IMSZ). The 15−100-m-thick IMSZ is one of several shallowly to moderately (∼45° ± 20°) W-SW−dipping brittle-plastic shear zones along the western flank of the range. These shear zones display microstructural evidence of initiation as top-NE contractional mylonite zones, consistent with regional Laramide kinematics, which have been pervasively overprinted by shear fabrics indicating top-SW extensional reactivation. Both top-NE and top-SW shear fabrics involve cataclasis and quartz dislocation creep, although top-SW shear is more commonly localized along phyllosilicate-lined shear bands. Shear zones are hosted predominately within Proterozoic gneiss, and contain abundant chlorite and white mica derived from alteration of hornblende and feldspar, which indicates that weakening driven by fluid reactions played an important role in localizing strain. Extensional overprinting appears to be most pervasive along more steeply dipping portions of shear zones and where secondary phyllosilicates form an interconnected weak phase, which suggests that reactivation was primarily controlled by geometry and rheological contrasts inherited from contraction. One top-SW shear zone adjacent to the IMSZ cuts a late Oligocene gabbro stock, and monazite grains synkinematic with top-SW shear in the IMSZ yielded late Oligocene to Early Miocene U-Th-Pb dates that correspond with initiation of the Rio Grande rift. Reactivation of weak reverse faults may represent an important structural control during initial extension in the middle crust, prior to slip along the high-angle Sangre de Cristo normal fault system.

Colorado↗
USGS2026

A geographic dataset of rocky reefs habitat areas of particular concern for the United States West Coast

The United States National Marine Fisheries Service determines “essential fish habitat (EFH)” for federally managed species in coordination with regional fishery management councils, considers adverse effects to those habitats, and provides information to further habitat conservation and enhancement. Identifying discrete subsets of EFH as “habitat areas of particular concern (HAPC)” can help focus conservation, management, and research efforts. In 2006, the Pacific Fishery Management Council designated rocky reefs along the United States (U.S.) West Coast as HAPCs for groundfishes because of their ecological significance, sensitivity to human impacts, and relative rarity. To better understand where rocky reefs occur, we (1) located rocky reef areas that were not included in the 2006 rocky reef dataset, and (2) incorporated best available data into a refined geographic dataset that enables visualization. Our update shows that rocky reefs are distributed throughout the U.S. West Coast continental margin, are patchier than previously known, and comprise 8% of the extent of all data inputs. This updated dataset will inform resource management decisions in coastal and marine environments.

California, Oregon, Washington↗
USGS2026

The potential impact of three-dimensional distributed slip models derived from real-time GNSS data on the performance of the ShakeAlert earthquake early warning system for slab interface earthquakes

The ShakeAlert® earthquake early warning (EEW) system is designed to warn users of imminent strong ground motion with sufficient time to take protective actions. ShakeAlert currently uses three algorithms to characterize the earthquake source. One estimates the location and magnitude using the first few seconds of the P wave and, while fast, tends to underestimate magnitude for M w 7.0+ earthquakes. A second estimates the location, orientation, length, and corresponding magnitude of a line source using observed peak ground acceleration and contributes primarily to M w 5.5+ earthquakes. The third infers earthquake magnitude from peak ground displacement measured using Global Navigation Satellite System (GNSS) data and offers nonsaturating magnitudes for M w 7.0+ earthquakes. Other EEW algorithms exist that infer temporally evolving spatially variable slip on a 3D fault surface from real‐time GNSS data, information that might enable more accurate and timely alerts in the event of large‐magnitude subduction interface earthquakes. Here, we evaluate the potential contribution of one such algorithm, BEFORES ( Minson et al. , 2014 ), to improve ShakeAlert performance through a simulated real‐time implementation of Bayesian evidence‐based fault orientation and real‐time earthquake slip (BEFORES) and other ShakeAlert algorithms using data for eight M w 7.6+ earthquakes. The test results demonstrate that BEFORES can produce well‐constrained and accurate magnitude estimates as soon as or sooner than other EEW algorithms, in turn enabling it to increase the amount of warning time users receive in many cases. However, with a modified Mercalli intensity (MMI) threshold of 3.5, which is commonly used for issuing alerts, BEFORES would tend to alert large geographic regions that did not feel strong shaking (MMI 6+). This effect can be mitigated using a higher alert threshold of MMI 4.5 without negative impact on the amount of warning time obtainable with BEFORES.

Bulletin of the Seismological Society of America↗