Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Environmental Science and Technology - Water”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,666 records · Page 61Linked to original sources
USGS2025

High-pass corner frequency selection and review tool for use in ground-motion processing

Raw seismological waveform data contain noise from the instrument’s surroundings and the instrument itself that can dominate recordings at low and high frequencies. To use these data in ground‐motion modeling, the effects of noise on the signals must be reduced and the signals’ usable frequency range identified. We present automated procedures to efficiently reduce low‐frequency noise that are implemented in the software package gmprocess. These procedures check for, and as needed remove, low‐frequency artifacts in the displacement record using polynomial fits, which can be used in combination with existing signal‐to‐noise ratio (SNR)‐based corner‐frequency selection procedures. The automated selections are then efficiently verified and refined using a graphical user interface (GUI) that plots relevant ground‐motion time series and spectra and tracks modifications to signal processing parameters. We demonstrate these procedures using recordings from the 2020 M 5.1 Sparta, North Carolina, and the 2013 M 4.7 southern Ontario earthquakes. Data processed with the SNR‐only and polynomial criteria for these events contain displacement artifacts in 37% and 23% of processed traces, respectively. Records with remaining artifacts are corrected manually using the GUI. These processing steps illustrate the workflow for efficient data processing with quality control.

Seismological Research Letters↗
USGS2024

Subduction zone geometry modulates the megathrust earthquake cycle: Magnitude, recurrence, and variability

Megathrust geometric properties exhibit some of the strongest correlations with maximum earthquake magnitude in global surveys of large subduction zone earthquakes, but the mechanisms through which fault geometry influences subduction earthquake cycle dynamics remain unresolved. Here, we develop 39 models of sequences of earthquakes and aseismic slip (SEAS) on variably-dipping planar and variably-curved nonplanar megathrusts using the volumetric, high-order accurate code tandem to account for fault curvature. We vary the dip, downdip curvature and width of the seismogenic zone to examine how slab geometry mechanically influences megathrust seismic cycles, including the size, variability, and interevent timing of earthquakes. Dip and curvature control characteristic slip styles primarily through their influence on seismogenic zone width: wider seismogenic zones allow shallowly-dipping megathrusts to host larger earthquakes than steeply-dipping ones. Under elevated pore pressure and less strongly velocity-weakening friction, all modeled fault geometries host uniform periodic ruptures. In contrast, shallowly-dipping and sharply-curved megathrusts host multi-period supercycles of slow-to-fast, small-to-large slip events under higher effective stresses and more strongly velocity-weakening friction. We discuss how subduction zones' maximum earthquake magnitudes may be primarily controlled by the dip and dimensions of the seismogenic zone, while second-order effects from structurally-derived mechanical heterogeneity modulate the recurrence frequency and timing of these events. Our results suggest that enhanced co- and interseismic strength and stress variability along the megathrust, such as induced near areas of high or heterogeneous fault curvature, limits how frequently large ruptures occur and may explain curved faults' tendency to host more frequent, smaller earthquakes than flat faults.

Journal of Geophysical Research: Solid Earth↗
USGS2025

Measurement of in situ-produced cosmogenic nuclides in fine-grained quartz from shale

In situ -produced 10 Be in quartz is widely used to constrain exposure ages and denudation rates, traditionally measured in sand-sized grains. Here we report a new method for isolating fine-grained quartz from shale and demonstrate its reliability for grain sizes down to single microns. Sequential dissolution tests and analyses of grain size separates show that meteoric 10 Be is eliminated and that recoil losses during cosmogenic nuclide production are balanced by implantation from other mineral grains. High-temperature combustion leads to diffusion of meteoric 10 Be into fine-grained quartz and must be used with caution.

Nuclear Instruments and Methods in Physics Researc↗
USGS2024

Geophysical characterization of an alkaline‑carbonatite complex using gravity and magnetic methods at Magnet Cove, Arkansas, USA

The Magnet Cove alkaline‑carbonatite complex (MCC), located in the Ouachita Mountains of south-central Arkansas in the United States, hosts an extensive variety of rare rock types and critical mineral resources with physical properties (density and magnetization) that contrast significantly with the sedimentary rocks into which they have intruded. Newly acquired ground-based gravity and magnetic data were used to develop two-dimensional and three-dimensional geophysical models of the Cretaceous-aged Magnet Cove intrusive complex. The models reveal that the MCC: (1) widens out at middle crustal depths to as much 22 km across, and may reach a depth of 20 km; (2) has a total volume (exposed and subsurface) that may be over 800 km 3 ; (3) is likely connected at depth to other intrusions in the Arkansas alkaline province; and (4) has a geometry that is aligned with pre-existing structures such as the Reelfoot rift and the Ouachita orogenic belt, some of which were likely structurally controlled by the Precambrian crystalline basement and the continent-ocean transition zone buried beneath the Ouachita orogen. For the first time, the magnetic models of the MCC account for the presence of strong remanent magnetization. This results in a geophysical workflow necessary to accurately interpret magnetic anomalies over the much larger Arkansas alkaline province, its geologic and structural framework, and critical mineral potential.

Arkansas↗
USGS2025

Using peak geometry and shifts in the x-ray spectrum of carbon from electron probe microanalysis to determine thermal maturity of organic matter

During the burial of mudstones, the associated organic matter undergoes gradual thermal maturation, a key process that can influence the reactivity of organic matter during catagenesis, the formation of hydrocarbon deposits and the chemical weathering of mudstones. Conventional methods for assessing the thermal maturity of organic matter often fail to reflect the geochemical heterogeneity between individual organic phases in mudstone samples. Here, we report an alternative, non-destructive, surficial and micro-scale (analytical spot size of ~ 300 nm with about 4 μm diffusion depth for micrometre-size organic grains) method to evaluate the thermal maturity of organic matter in mudstones using the carbon K α X-ray spectrum measured by field emission-electron probe microanalyser (FE-EPMA). Using this method, we observed correlations between parameter values derived from FE-EPMA spectra, including the peak position, the peak area and the intra-sample heterogeneity of these measurements, and independently measured vitrinite/solid bitumen reflectance for a suite of mudstones, representing different age, geological context and burial depth. With the increased values in peak area and position, we identified an increase in the carbon mass fraction of organic matter and the mean nominal oxidation state of carbon approaching zero. These trends, which are consistent with aromatisation and graphitisation, provide the rationale for using FE-EPMA to estimate the thermal maturity of organic matter. To explore some of these trends in more detail, we employed time-of-flight secondary ionisation mass spectrometry, X-ray photoelectron spectroscopy and optical reflectance measurements on a subset of samples.

Geostandards and Geoanalytical Research↗
USGS2026

Earthquake-hazard exposure of residents with potential access and functional needs in the United States

Earthquake response plans and earthquake early warning (EEW) systems designed for general populations may not consider potential access and functional needs (AFN) of individuals with physical, sensory, cognitive, or social limitations. Previous efforts to map the distribution of these populations have focused on social-vulnerability indices that ignore or oversimply these limitations. The descriptive and exploratory analysis summarized in this United States (U.S.) case study addresses this gap by identifying and integrating spatially explicit data for AFN-related residential populations, earthquake hazards, and county and county equivalents for the conterminous U.S., Alaska, Puerto Rico, and Hawaii. We focus on 13 AFN-related attributes that relate to an individual's ability to access information contained in an EEW alert, to understand and process earthquake information or observed ground shaking, and to take self-protective actions based on this information and physical cues of an earthquake. Depending on the demographic attribute, there are millions to tens of millions of U.S. residents with AFN-related attributes in areas considered to have varying likelihoods (2%, 10%, and 50%) of exceedance of a damaging earthquake in the next 50 years. Although these amounts represent low percentages at the national level, the percentage of individuals with AFN-related attributes in many counties and county equivalents substantially exceeds national percentages. No one county, county equivalent, U.S. state, or U.S. territory has the highest percentage of individuals in all AFN-related attributes; therefore, future efforts to increase individual resilience to earthquakes may benefit from understanding the local context of individuals with potential access and functional needs.

International Journal of Disaster Risk Reduction↗
USGS2024

Using geologic mapping to understand temporal and spatial relations of closely clustered to concurrent latest Holocene surface ruptures on two intersecting faults, south-central Mojave Desert, California

The Pinto Mountain Fault Zone (PMFZ) marks a major structural boundary between east-oriented sinistral faults of the eastern Transverse Ranges (to the south) and northwest-oriented dextral faults of the south-central Mojave Desert (to the north). These structural fault systems comprise sinistral and dextral deformational domains of the Eastern California Shear Zone (ECSZ) that intersect one another in the Copper Mountain and Twentynine Palms areas. The U.S. Geological Survey (USGS) is conducting detailed geologic mapping and geochronologic investigations designed to clarify geometric, kinematic, and temporal relations among the two domains, that are focused on the central portion of the left-lateral PMFZ near its intersection with the right-lateral Copper Mountain Fault (CMF) and Mesquite Lake Fault Zone (MLFZ).

California↗
USGS2026

Alternative approaches to dryland reclamation enhance vegetation cover and soil stability at a former uranium mine

Introduction Conventional reclamation methods to recover dryland ecosystems after mineral extraction often have low success. Alternative reclamation techniques may help overcome the many challenges to establishing persistent native vegetation and stable soils. Objectives Compare conventional reclamation approaches that focus primarily on soil stabilization to alternative approaches that may improve native ecosystem restoration at the Kanab North Mine in northern Arizona. Methods In a fully crossed experiment, conventional seed mix (native and non-native species) and seeding methods (drill-seeding) were compared to alternative practices, including a native-only seed mix, connectivity modifiers (ConMods) with hand seeding, and a biocrust inoculation. Restoration metrics like plant establishment, species composition, soil surface cover and stability, biocrust establishment, and near-surface wind-driven sediment were monitored over the first 5 years post-reclamation. Results While all restoration metrics improved with time, compared to traditional methods, ConMods increased total, graminoid, and native plant species cover, and the native-only seed mix increased woody, native, and perennial species cover. Biocrust inoculation increased late-successional biocrust development, but biocrusts only persisted over 5 years in combination with ConMods. Soil stability increased in all treatments, but both ConMods and biocrust inoculation increased stability compared to traditional practices. Conclusion Overall, alternative approaches to reclamation tested here (ConMods, native seed, and biocrust inoculation) were more effective than traditional practices at increasing total plant cover, facilitating biocrust establishment, and promoting soil stability after uranium mine reclamation.

Arizona↗
USGS2025

Nodal seismic deployment on Mauna Loa volcano, Hawaii: Dataset and preliminary insights

Mauna Loa is the largest active volcano on Earth, comprising ∼51% of the Island of Hawai‘i’s landmass and posing significant risks to the island’s communities, infrastructure, and natural environment. Historical eruptions have produced lava flows that have reached the ocean in as little as 3 hr. The timing and location of such lava flows in the past 200 yr underscore how critical determination of the location and geometry of magma storage and structure is for volcanic hazard assessment and eruption forecasting. Now, after nearly 38 yr of volcanic quiescence, Mauna Loa has erupted again. On 27 November 2022, fissures initiated within the summit caldera and then migrated to the northeast rift zone, where they generated a large lava flow that threatened a major highway. To improve our understanding of the geometry of this magma system, we deployed a temporary nodal array on Mauna Loa in the summer of 2024. This increased our seismic coverage sufficiently to image this magmatic system. This nodal array consists of 33 seismometers distributed on and around the volcano and was deployed for over three months to record seismic signals. The primary objective of this project is to resolve the high‐resolution seismic velocity structure and characterize seismic features associated with magma storage and ascent pathways. In this article, we present an overview of the deployment, evaluate the quality of the data, and show example recordings to evaluate the suitability of the data set for future seismic investigations, including earthquake relocation, seismic tomography, and receiver function analysis. Comparisons with nearby permanent broadband and short‐period seismic stations demonstrate that the nodal array recorded high‐quality waveforms, making it a valuable resource for constraining the magmatic system beneath Mauna Loa at multiple scales.

Hawaii↗
USGS2025

Methodology for compilation of previously published contour data showing the altitude of the base of Dakota Sandstone on the Colorado Plateau, Arizona, Colorado, New Mexico, and Utah

Structure contours and other geologic information from numerous published geologic maps were digitized and compiled into a digital dataset showing the configuration of a single stratigraphic datum, the base of the Dakota Sandstone and its equivalents across the Colorado Plateau. The principal maps compiled in digital form are a series of 1:250,000-scale 1 degree (°) × 2° quadrangle maps published by the U.S. Geological Survey, augmented by other geologic maps published at various map scales. The compiled digital dataset contains geologic map polygons of the Dakota Sandstone and regional stratigraphic equivalents, the location of faults and fold axes, structure contour lines that define the altitude of the base of the unit and bedding orientation data computed from the structure contour lines. This report provides the scientific rationale for compilation of these data and describes the compilation methodology for each of the data elements. This report provides an extended description of the data compilation in a companion U.S. Geological Survey digital data release of spatial data and attributes associated with the contoured surface and associated geologic data layers.

Arizona, Colorado, New Mexico, Utah↗
USGS2024

Bathymetric and velocimetric surveys at highway bridges crossing the Missouri River between Kansas City and St. Louis, Missouri, May 19–26, 2021

Bathymetric and velocimetric data were collected by the U.S. Geological Survey, in cooperation with the Missouri Department of Transportation, near nine bridges at eight highway crossings of the Missouri River between Kansas City and St. Louis, Missouri, from May 19 to 26, 2021. A multibeam echosounder mapping system was used to obtain channel-bed elevations for river reaches about 1,640 to 1,840 feet (ft) longitudinally and generally extending laterally across the active channel from bank to bank during low to moderate flood-flow conditions. These surveys provided channel geometry and hydraulic conditions at the time of the surveys and provided characteristics of scour holes that may be useful in developing or verifying predictive guidelines or equations for computing potential scour depth. These data also may be useful to the Missouri Department of Transportation as a low to moderate flood-flow assessment of the bridges for stability and integrity issues with respect to bridge scour during floods. Bathymetric data were collected around every in-channel pier. Scour holes were present at most piers for which bathymetry could be obtained, except those on banks or surrounded by riprap. Occasionally, scour holes were minor and difficult to discern from nearby dunes and ripples. All the bridge sites in this study were previously surveyed and documented in previous studies. Comparisons between bathymetric surfaces from the previous surveys and those of the current (2021) study do not indicate any consistent correlation between channel-bed elevations and streamflow conditions. The average difference between the bathymetric surfaces varied from 1.59 ft higher to 0.95 ft lower in 2021 than 2017, which corresponds to a gain of 100,200 cubic yards and a loss of 55,800 cubic yards, respectively. The average difference between the bathymetric surfaces varied from 2.74 ft higher to 3.05 ft lower in 2021 than 2013, which corresponds to a gain of 111,500 cubic yards and a loss of 169,200 cubic yards, respectively. The average difference between the bathymetric surfaces varied from 4.52 ft higher to 1.38 ft lower in 2021 than 2011, which corresponds to a gain of 221,100 cubic yards and a loss of 90,300 cubic yards, respectively. The most substantial overall net gain was 221,100 cubic yards between 2011 and 2021 at structures L0550 and A4497 at Jefferson City (site 20). The large net gain likely results from a combination of the mitigation of the scour holes near pier 4 of both bridges and the substantially lower flow in 2021 than in 2011. Alternatively, the most substantial overall net loss was 169,200 cubic yards between 2013 and 2021 at structure A6288 at Hermann (site 21), despite comparable streamflows. Pier size, nose shape, and skew to approach flow had a substantial effect on the size of the scour hole observed at a given pier. Larger and deeper scour holes were present at piers with wide or blunt noses caused by exposed footings or caissons. When a pier was skewed to primary approach flow, the scour hole was generally deeper and larger than at a similar pier without skew; furthermore, the shape of the scour hole near skewed piers in this study generally was longer and deeper on the side with impinging flow. At structure A6288 at Hermann (site 21), the scour hole near pier 5 was difficult to discern from nearby dunes and ripples, whereas the upstream edge of the footing was visible at pier 4, which likely contributes to the larger scour hole near that pier; the top of the footing may blunt the horseshoe vortex at pier 5, but the exposed front of the footing may exacerbate the vortex at pier 4.

Missouri↗
USGS2024

Temporal, spatial, and chemical evolution of Quaternary high-silica rhyolites in the Mineral Mountains, Utah

The Mineral Mountains in southwestern Utah are a structurally controlled core complex at the confluence of the Colorado Plateau and the Basin and Range physiographic provinces. Aside from hosting Utah’s largest batholith, the Mineral Mountains host some of the State’s youngest high-silica rhyolites, which have been linked to a magma source that is presently being utilized as an enhanced geothermal system. The high-silica rhyolites take the form of effusive lavas and domes, and explosive products are rare. Previous K-Ar dating of these Pleistocene rhyolites placed eruptions between about 790 and 500 kilo-annum (ka) with contemporaneous basalts erupting in the valley to the east of the Mineral Mountains. Large uncertainties on these ages obscured the tempo of eruptions and thus hindered attempts to constrain the timescales of the petrogenetic processes that produced the rhyolites. In this study, we build on previous studies conducted in the 1970s and 1980s by using new geochronologic and geochemical data to investigate the temporal and spatial evolution of the youngest phase of volcanism in the Mineral Mountains. We identify two major eruptive periods, from approximately 850 to 750 ka and from approximately 590 to 480 ka. The older phase is characterized by the eruption of several basaltic lavas, two obsidian flows, and a series of coalescing porphyritic rhyolite domes. The younger phase included the eruption of six evolved high-silica rhyolite domes and one pyroclastic deposit, followed by the eruption of trachyandesite in the adjacent valley to the east. Whole-rock geochemical data indicate that the rhyolites can be divided into three chemical groups, with more evolved compositions erupting through time. The youngest rhyolites along the range crest have the lowest total iron and TiO 2 concentrations and the highest incompatible element concentrations, indicative of increasing differentiation with time and elevation. Improved precision on the eruption ages indicates a recurrence interval of approximately 20 thousand years. The eruptive flux for both periods of rhyolitic volcanism is about 0.01 cubic kilometers per thousand years, which is less than the magma resurgence flux rates for syn-caldera and post-caldera eruptions of the Valles Caldera and Yellowstone Caldera volcanic systems. Collectively, these geochemical, geochronological, and volumetric data may facilitate a better understanding of heat flux and the longevity of magmatic sources related to geothermal resources in similar small-volume, silicic systems.

Utah↗
USGS2026

Computing flow-field distortion coefficients from well-construction and formation properties

Direct measurements of groundwater velocity made with borehole flowmeters in screened wells must be compensated for the effects of flow-field distortion (also known as borehole acceleration). A theoretical equation developed by Drost et al. (1968) and simple inputs describing hydraulic properties of well construction and geologic formation were programmed into an Excel workbook to facilitate computation by groundwater-flowmeter users. Tables describing the physical and hydraulic properties for well constructions and gravel pack media are provided with an example to facilitate use of the workbook. Groundwater flowlines converge or diverge as they pass from a geologic formation, through a gravel pack and well screen. The extent of flowline convergence or divergence and the value of the flow-field distortion coefficient is related to the relative changes in hydraulic conductivity of the well screen, gravel pack, and geologic formation. Convergence or divergence is accompanied by acceleration or deceleration of groundwater. Direct measurements of groundwater velocity at the center of the monitoring well can be adjusted to provide a more accurate estimate of velocity in the formation by applying a correction for flow-field distortion. Variables required to compute the flow-field distortion coefficient include the hydraulic conductivity of the gravel pack, well screen, and the geologic formation surrounding the well screen; the borehole radius, and the inside radius and outside radius of the well screen.

Groundwater↗
USGS2010

Divisions of geologic time—Major chronostratigraphic and geochronologic units

Effective communication in the geosciences requires consistent uses of stratigraphic nomenclature, especially divisions of geologic time. A geologic time scale is composed of standard stratigraphic divisions based on rock sequences and is calibrated in years. Over the years, the development of new dating methods and the refinement of previous methods have stimulated revisions to geologic time scales. Advances in stratigraphy and geochronology require that any time scale be periodically updated. Therefore, Divisions of Geologic Time, which shows the major chronostratigraphic (position) and geochronologic (time) units, is intended to be a dynamic resource that will be modified to include accepted changes of unit names and boundary age estimates. This fact sheet is a modification of USGS Fact Sheet 2007-3015 by the U.S. Geological Survey Geologic Names Committee.

Fact Sheet↗
USGS2008

Geology and geochemistry of Jurassic plutonic rocks, Baboquivari Mountains, south-central Arizona

Among the plutons of the Jurassic magmatic arc segment in southern Arizona, northern Sonora, and southern California, two distinctive rock types dominate, occurring together in numerous mountain ranges: porphyritic, titanite-bearing hornblende-biotite granodiorite; and biotite leucogranite. These characteristic rocks are particularly well preserved and well exposed around Kitt Peak, in the Baboquivari Mountains, southern Arizona. The Middle to early Late Jurassic Kitt Peak Plutonic Suite (KPPS) comprises three units: Aguirre Peak Quartz Diorite (APQD;<170 Ma, >=165 Ma, U-Pb), chiefly hornblende mesodiorite; Kitt Peak Granodiorite (KPGD; 165 Ma), hornblende-biotite granodiorite and monzogranite; and Pavo Kug Granite (PKG; 159 Ma), equigranular biotite leucogranite. This range also hosts a fourth, regionally unusual, Jurassic plutonic unit: the Baboquivari Peak Perthite Granite, related to post-arc, Late Jurassic crustal extension. Binary variation diagrams, incompatible element patterns, and REE spectra indicate APQD and KPGD are consanguineous. APQD basaltic mesodiorite evidently approximates the parental magma for the APQD–KPGD series. More evolved rocks of this series evidently formed by combinations of fractional crystallization and mixing with or assimilation of crustal material. PKG is less directly related to APQD and KPGD than these two are to one another.

Arizona, Sonora↗
USGS2024

Recent advances in characterizing the crustal stress field and future applications of stress data: Perspectives from North America

The stress field controls patterns of crustal deformation, including which faults are likeliest to cause earthquakes or transmit fluids. Since the 1950s, maps of maximum horizontal stress ( S Hmax ) orientations have advanced dramatically, and the style of faulting (relative principal stress magnitudes) has recently been mapped in some regions as well. This perspectives paper summarizes developments in characterizing stress orientations and (relative) magnitudes, including new seismic and borehole methods, as well as progress in identifying the causes of stress variations. Despite these advances, adding far more spatiotemporal detail would allow geoscientists to address many of today's key challenges regarding natural hazards, energy development, and geodynamics. In particular, it is critically important to characterize stress heterogeneity at multiple scales while also recognizing the coherent variability of the stress field. The second part of the paper considers how more detailed stress datasets could prove essential to addressing some of the grand questions in geoscience, including deciphering the poorly understood feedbacks between crustal dynamics and surface processes, improving earthquake and eruption forecasts, and determining the origins and shared properties of plate boundaries.

Geological Society, London, Special Publications↗
USGS2025

Chemostratigraphy of the Cretaceous Hue Shale in Arctic Alaska: Exploring paleoceanographic controls on trace element enrichment, organic matter accumulation, and source-rock evolution

We document chemostratigraphy in an outcrop of late Albian to early Campanian (∼103–82 Ma) marine source rocks to better understand paleoenvironmental controls on trace element (TE) enrichment and organic matter accumulation in the distal Colville foreland basin of Arctic Alaska and how those drivers are linked to arc volcanism and successions of Cretaceous oceanographic and climatic biogeochemical events. This unique, 113-m-thick section of Cretaceous Hue Shale deposited during a series of previously undocumented Arctic Cretaceous oceanic anoxic events (Lease et al., 2024) is the only known exposure of thermally immature (0.48–0.52% R o , random vitrinite reflectance) Hue Shale in Arctic Alaska. Strata comprise mainly clay-rich mudstone with elevated total organic carbon (TOC) and hydrogen index values reaching 26.3 wt% (mean = 7.5 wt%) and 689 mg hydrocarbon (HC)/g TOC (mean = 385 mg HC/g TOC), respectively. Maceral composition consists predominantly of fluorescent amorphous organic matter, with abundant brightly fluorescent alginite, including Tasmanites , acritarchs, and Leiosphaeridia . Discrete layers of volcanic ash (preserved as bentonite) are present throughout the section and provide quantitative age control based on U–Pb dates. Chemostratigraphic trends are investigated to advance our understanding of local oceanographic conditions and controls on stratigraphic and temporal heterogeneity of Brookian source rocks. Concurrent sedimentary enrichment in Mo, U, V, Pb, and Cu across the Albian–Cenomanian boundary of the exposed basal gamma-ray zone, may reflect anoxic to euxinic benthic redox conditions favoring organic matter accumulation and preservation. Fluctuating degrees of anoxia-euxinia are inferred throughout the overlying Hue Shale succession, reflected by varying patterns of TE enrichment and TE–TOC covariation. Elevated C org /P molar ratios (>250) across most of the section, with several values exceeding 690, signify that enhanced biological productivity is sustained throughout deposition. Enhanced productivity, recorded by both C org /P and excess Ba, also parallels increases in source rock richness (elevated TOC and S 2 values) during the late Albian–early Cenomanian and late Cenomanian – Turonian. Enhanced productivity and variations in oceanic circulation/stratification likely both drove changes in benthic redox conditions that favored organic carbon accumulation and preservation. Increased continental arc volcanism (e.g., Okhotsk–Chukotka volcanic belt) and High Arctic Large Igneous Province magmatic eruptions throughout the Cretaceous, inferred to have influenced nutrient cycling and local aqueous nutrient availability, also have been invoked as potential drivers of organic carbon burial and source-rock development across the sedimentary sequence. Results presented here document the organic-rich and oil-prone source-rock quality of the Hue Shale in the distal part of the Colville foreland basin and bolster the potential for a Cretaceous petroleum system beneath the eastern North Slope.

Alaska↗