Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Environmental Health”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61Linked to original sources

Water Quality of Combined Sewer Overflows, Stormwater, and Streams, Omaha, Nebraska, 2006-07

The U.S. Geological Survey, in cooperation with the City of Omaha, investigated the water quality of combined sewer overflows, stormwater, and streams in the Omaha, Nebraska, area by collecting and analyzing 1,175 water samples from August 2006 through October 2007. The study area included the drainage area of Papillion Creek at Capeheart Road near Bellevue, Nebraska, which encompasses the tributary drainages of the Big and Little Papillion Creeks and Cole Creek, along with the Missouri River reach that is adjacent to Omaha. Of the 101 constituents analyzed during the study, 100 were detected in at least 1 sample during the study. Spatial and seasonal comparisons were completed for environmental samples. Measured concentrations in stream samples were compared to water-quality criteria for pollutants of concern. Finally, the mass loads of water-quality constituents in the combined sewer overflow discharges, stormwater outfalls, and streams were computed and compared. The results of the study indicate that combined sewer overflow and stormwater discharges are affecting the water quality of the streams in the Omaha area. At the Papillion Creek Basin sites, Escherichia coli densities were greater than 126 units per 100 milliliters in 99 percent of the samples (212 of 213 samples analyzed for Escherichia coli) collected during the recreational-use season from May through September (in 2006 and 2007). Escherichia coli densities in 76 percent of Missouri River samples (39 of 51 samples) were greater than 126 units per 100 milliliters in samples collected from May through September (in 2006 and 2007). None of the constituents with human health criteria for consumption of water, fish, and other aquatic organisms were detected at levels greater than the criteria in any of the samples collected during this study. Total phosphorus concentrations in water samples collected in the Papillion Creek Basin were in excess of the U.S. Environmental Protection Agency's proposed criterion in all but four stream samples (266 of 270). Similarly, only 2 of 84 Missouri River samples had total phosphorus concentrations less than the proposed criterion. The proposed total nitrogen criterion for the Corn Belt and Northern Great Plains ecoregion was surpassed in 80 percent of the water samples collected from the stream sites. Samples with total nitrogen concentrations greater than the proposed criterion were most common at Papillion Creek and Big Papillion Creek sites, where the proposed criterion was surpassed in 90 and 96 percent of the samples collected, respectively. Elevated concentrations of total nitrogen were less common at the Missouri River sites, with 33 percent of the samples analyzed having concentrations that surpassed the proposed nutrient criterion for total nitrogen. The three constituents with measured concentrations greater than their respective health-based screening levels were nickel, zinc, and dichlorvos. Differences in water quality during the beginning, middle, and end of the combined sewer overflow discharge and the stream hydrograph rise, peak, and recession were investigated. Concentrations from the ending part of the combined sewer overflow hydrograph were significantly different than those from the beginning and middle parts for 3 and 11 constituents, respectively. No constituents were significantly different between the beginning and middle parts of the combined sewer overflow discharge hydrograph. For the stream site upstream from combined sewer overflow outfalls on Cole Creek, the constituents with geometric mean values for the hydrograph rise that were at least twice those for the values of the peak and recession were specific conductance, magnesium, nitrite, N,N-diethyl-meta-toluamide (DEET), methyl salicylate, p-cresol, and Escherichia coli. Similarly, the constituents where the hydrograph peak was at least twice that for the rise and recession at the upstream Cole Creek site were total suspended solids, silver, an

Scientific Investigations Report↗

Field screening of water quality, bottom sediment, and biota associated with irrigation drainage in the Yuma Valley, Arizona, 1995

Because of concerns expressed by the U.S. Congress and the environmental community, the Department of the Interior began a program in late 1985 to identify the nature and extent of water-quality problems induced by irrigation that might exist in the western States. Surface water, bottom sediment, and biota were collected from March through September 1995 along the lower Colorado River and in agricultural drains at nine sites in the Yuma Valley, Arizona, and analyzed for selected inorganic and organic constituents. Analyses of water, bottom sediment, and biota were completed to determine if irrigation return flow has caused, or has the potential to cause, harmful effects on human health, fish, and wildlife in the study area. Concentrations of dissolved solids in surface-water samples collected in March generally did not vary substantially from surface-water samples collected in June. Concentrations of dissolved solids ranged from 712 to 3,000 milligrams per liter and exceeded the U.S. Environmental Protection Agency secondary maximum contaminant level of 500 milligrams per liter for drinking water. Concentrations of chloride in 9 of 18 water samples and concentrations of sulfate in 16 of 18 water samples exceeded the U.S. Environmental Protection Agency secondary maximum contaminant level of 250 milligrams per liter for drinking water. Calcium and sodium were the dominant cations, and chloride and sulfate were the dominant anions. The maximum selenium concentration of 8 micrograms per liter exceeded the U.S. Environmental Protection Agency aquatic-life chronic criterion of 5 micrograms per liter. Concentrations of lead in 7 of 18 water samples and concentrations of mercury in 4 of 18 water samples exceeded the aquatic-life cronic criteria of 3.2 and 0.012 micrograms per liter, respectively. Concentrations of antimony, beryllium, cadmium, and silver in the water samples were below analytical reporting limits. Arsenic was detected in 3 of 9 bottom-sediment samples, and concentrations ranged from 11 to 16 micrograms per gram. Concentrations ofaluminum, beryllium, boron, copper, lead, and zinc were highest in samples from Main Drain at southerly international boundary near San Luis, Arizona. Selenium was detected in all bottom-sediment samples, and concentrations ranged from 0.1 to 0.7 micrograms per gram. Concentrations of cadmium, europium, homium, mercury, molybdenum, silver, tantalum, tin, and uranium were below analytical reporting limits in the bottom-sediment samples. Concentrations of trace elements in bottom-sediment samples were within the ranges found in a study of soils of the western United States and did not indicate a significant accumulation of these constituents. p,p'Dichlorodiphenyldichloroethylene (commonly referred to as p,-p'-DDE) was detected in one bottom-sediment sample at a concentration of 1.4 micrograms per gram. No other organochlorine compounds were detected in the bottom-sediment samples. DDE was present in all fish and bird samples. Almost one-half of the fish samples contained DDE residues that were two times higher than the mean calculated for a national study in 1984-85. Twenty-tree percent of the fish contained more than three times the national mean. Fish from downstream parts of the Main Drain had the highest concentrations of DDE. Although concentrations of DDE in fish and in bird carcasses and eggs were above background levels, residues generally were below thresholds associated with chronic poisoning and reproductive problems in figh and wildlife. Concentrations of 18 trace elements were detected in cattail (Typha sp.) roots, freshwater clam (Corbicula fluminea), fish, and bird samples. Selenium in most fish and in livers of red-winged (Agelaius phoeniceus) and yellow-headed (Xanthocephalus xanthocephalus) blackbirds was above background concentrations but below toxic concentrations. In contrast, selenium was present in a killdeer (Charadrium vociferus) liver sample at potentially toxic con

Water-Resources Investigations Report↗

Introduced species: A significant component of human-caused global change

Biological invasions are a widespread and significant component of human-caused global environmental change. The extent of invasions of oceanic islands, and their consequences for native biological diversity, have long been recognized. However, invasions of continental regions also are substantial. For example, more than 2,000 species of alien plants are established in the continental United States. These invasions represent a human-caused breakdown of the regional distinctiveness of Earth's flora and fauna—a substantial global change in and of itself. Moreover, there are well- documented examples of invading species that degrade human health and wealth, alter the structure and functioning of otherwise undisturbed ecosystems, and/or threaten native biological diversity. Invasions also interact synergistically with other components of global change. notably land use change. People and institutions working to understand, prevent, and control invasions are carrying out some of the most important—and potentially most effective—work on global environmental change.

New Zealand Journal of Ecology↗

Science implementation of Forecast Mekong for food and environmental security

Forecast Mekong is a significant international thrust under the Delta Research and Global Observation Network (DRAGON) of the U.S. Geological Survey (USGS) and was launched in 2009 by the U.S. Department of State and the Foreign Ministers of Cambodia, Laos, Thailand, and Vietnam under U.S. Department of State Secretary Hillary R. Clinton's Lower Mekong Initiative to enhance U.S. engagement with countries of the Lower Mekong River Basin in the areas of environment, health, education, and infrastructure. Since 2009, the USGS has worked closely with the U.S. Department of State; personnel from Cambodia, Laos, Thailand, and Vietnam; nongovernmental organizations; and academia to collect and use research and data from the Lower Mekong River Basin to provide hands-on results that will help decisionmakers in future planning and design for restoration, conservation, and management efforts in the Lower Mekong River Basin. In 2012 Forecast Mekong is highlighting the increasing cooperation between the United States and Lower Mekong River Basin countries in the areas of food and environmental security. Under the DRAGON, Forecast Mekong continues work in interactive data integration, modeling, and visualization system by initiating three-dimensional bathymetry and river flow data along with a pilot study of fish distribution, population, and migratory patterns in the Lower Mekong River Basin. When fully developed by the USGS, in partnership with local governments and universities throughout the Mekong River region, Forecast Mekong will provide valuable planning tools to visualize the consequences of climate change and river management.

Phnom Penh↗

Benefits of the fire mitigation ecosystem service in the Great Dismal Swamp National Wildlife Refuge, Virginia, USA

The Great Dismal Swamp (GDS) National Wildlife Refuge delivers multiple ecosystem services, including air quality and human health via fire mitigation. Our analysis estimates benefits of this service through its potential to reduce catastrophic wildfire related impacts on the health of nearby human populations. We used a combination of high-frequency satellite data, ground sensors, and air quality indices to determine periods of public exposure to dense emissions from a wildfire within the GDS. We examined emergency department (ED) visitation in seven Virginia counties during these periods, applied measures of cumulative Relative Risk to derive the effects of wildfire smoke exposure on ED visitation rates, and estimated economic losses using regional Cost of Illness values established within the US Environmental Protection Agency BenMAP framework. Our results estimated the value of one avoided catastrophic wildfire in the refuge to be \$3.69 million (2015 USD), or \$306 per hectare of burn. Reducing the frequency or severity of extensive, deep burning peatland wildfire events has additional benefits not included in this estimate, including avoided costs related to fire suppression during a burn, carbon dioxide emissions, impacts to wildlife, and negative outcomes associated with recreation and regional tourism. We suggest the societal value of the public health benefits alone provides a significant incentive for refuge mangers to implement strategies that will reduce the severity of catastrophic wildfires.

North Carolina, Virginia↗

Occurrence and distribution of pesticides in surface waters of the Hood River basin, Oregon, 1999-2009

The U.S. Geological Survey analyzed pesticide and trace-element concentration data from the Hood River basin collected by the Oregon Department of Environmental Quality (ODEQ) from 1999 through 2009 to determine the distribution and concentrations of pesticides in the basin's surface waters. Instream concentrations were compared to (1) national and State water-quality standards established to protect aquatic organisms and (2) concentrations that cause sublethal or lethal effects in order to assess their potential to adversely affect the health of salmonids and their prey organisms. Three salmonid species native to the basin are listed as "threatened" under the U.S. Endangered Species Act: bull trout, steelhead, and Chinook salmon. A subset of 16 sites was sampled every year by the ODEQ for pesticides, with sample collection targeted to months of peak pesticide use in orchards (March-June and September). Ten pesticides and four pesticide degradation products were analyzed from 1999 through 2008; 100 were analyzed in 2009. Nineteen pesticides were detected: 11 insecticides, 6 herbicides, and 2 fungicides. Two of four insecticide degradation products were detected. All five detected organophosphate insecticides and the one detected organochlorine insecticide were present at concentrations exceeding water-quality standards, sublethal effects thresholds, or acute toxicity values in one or more samples. The frequency of organophosphate detection in the basin decreased during the period of record; however, changes in sampling schedule and laboratory reporting limits hindered clear analysis of detection frequency trends. Detected herbicide and fungicide concentrations were less than water-quality standards, sublethal effects thresholds, or acute toxicity values. Simazine, the most frequently detected pesticide, was the only herbicide detected at concentrations within an order of magnitude (factor of 10) of concentrations that impact salmonid olfaction. Some detected pesticides are of concern, not for their toxicity alone, but for their ability to potentiate the harmful impacts of other pesticides, particularly organophosphates, on salmonids or their prey. Many samples contained mixtures of pesticides, but the effects to salmonids of relevant mixtures at environmentally realistic concentrations for the basin are unknown. Trace-element concentration data, although limited, indicate that eight trace elements are also of concern for their potential to harm salmonid health. The dataset is limited with regard to the spatial and seasonal distribution of pesticides and trace elements in all salmonid-bearing streams, the presence of particle-bound pesticides, and the presence of several unmonitored pesticides known to be used in the basin.

Oregon↗

Mercury recycling in the United States in 2000

Reclamation and recycling of mercury from used mercury- containing products and treatment of byproduct mercury from gold mining is vital to the continued, though declining, use of this metal. Mercury is reclaimed from mercury-containing waste by treatment in multistep high-temperature retorts-the mercury is volatized and then condensed for purification and sale. Some mercury-containing waste, however, may be landfilled, and landfilled material represents loss of a recyclable resource and a threat to the environment. Related issues include mercury disposal and waste management, toxicity and human health, and regulation of mercury releases in the environment. End-users of mercury-containing products may face fines and prosecution if these products are improperly recycled or not recycled. Local and State environmental regulations require adherence to the Resource Conservation and Recovery Act and the Comprehensive Environmental Response, Compensation, and Liability Act to regulate generation, treatment, and disposal of mercury-containing products. In the United States, several large companies and a number of smaller companies collect these products from a variety of sources and then reclaim and recycle the mercury. Because mercury has not been mined as a principal product in the United States since 1992, mercury reclamation from fabricated products has become the main source of mercury. Principal product mercury and byproduct mercury from mining operations are considered to be primary materials. Mercury may also be obtained as a byproduct from domestic or foreign gold-processing operations. In the early 1990s, U.S. manufacturers used an annual average that ranged from 500 to 600 metric tons of recycled and imported mercury for fabrication of automobile convenience switches, dental amalgam, fluorescent lamps, medical uses and thermometers, and thermostats. The amount now used for fabrication is estimated to be 200 metric tons per year or less. Much of the data on mercury is estimated because it is a low-volume commodity and its production, use, and disposal is difficult to track. The prices and volumes of each category of mercury-containing material may change dramatically from year to year. For example, the average price of mercury was approximately $150 per flask from 2000 until 2003 and then rose sharply to $650 per flask in fall 2004 and approximately $850 per flask in spring 2005. Since 1927, the common unit for measuring and pricing mercury has been the flask in order to conform to the system used at Almaden, Spain (Meyers, 1951). One flask weighs 34.5 kilograms, and 29 flasks of mercury are contained in a metric ton. In the United States, the chlorine-caustic soda industry, which is the leading end-user of elemental mercury, recycles most of its mercury in-plant as home scrap. Annual purchases of replacement mercury by the chlorine-caustic soda industry indicate that some mercury may be lost through evaporation to the environment, put into a landfill as industrial waste, or trapped within pipes in the plant. Impending closure of domestic and foreign mercury-cell chlorine-caustic soda plants and the shift to nonmercury technology for chlorine-caustic soda production could ultimately result in a significant volume of elemental mercury for recycling, sale, or storage. Globally, mercury is widely used in artisanal, or small-scale, gold mining. Most of that mercury is lost to the environment and is not recycled. The recycling rate for mercury was not available owing to insufficient data in 2000, and the efficiency of mercury recycling was estimated to be 62 percent.

Circular↗

Great Lakes restoration success through science: U.S. Geological Survey accomplishments 2010 through 2013

The Great Lakes (Superior, Michigan, Huron, Erie, and Ontario) are the largest group of freshwater lakes on Earth and serve as an important source of drinking water, transportation, power, and recreational opportunities for the United States and Canada. They also support an abundant commercial and recreational fishery, are crucial for agriculture, and are essential to the economic vitality of the region. The Great Lakes support a wealth of biological diversity, including over 200 globally rare plants and animals and more than 40 species that are found nowhere else in the world. However, more than a century of environmental degradation has taken a substantial toll on the Great Lakes. To stimulate and promote the goal of a healthy Great Lakes region, President Obama and Congress created the Great Lakes Restoration Initiative (GLRI) in 2009. The GLRI is an interagency collaboration that seeks to address the most significant environmental problems in the Great Lakes ecosystem. The GLRI is composed of five focus areas that address these issues: Cleaning up toxic substances and Areas of Concern, Preventing and controlling invasive species, Promoting nearshore health, Protecting and restoring habitat and wildlife, Tracking progress and working with partners. As of August 2013, the GLRI had funded more than 1,500 projects and programs of the highest priority to meet immediate cleanup, restoration, and protection needs. These projects use scientific analyses as the basis for identifying the restoration needs and priorities for the GLRI. Results from the science, monitoring, and other on-the-ground actions by the U.S. Geological Survey (USGS) provide the scientific information needed to help guide the Great Lakes restoration efforts. This document highlights a selection of USGS projects for each of the five focus areas through 2013, demonstrating the importance of science for restoration success. Additional information for these and other USGS projects that are important for Great Lakes restoration is available at http://cida.usgs.gov/glri/glri-catalog/ .

Great Lakes↗

Mercury recycling in the United States in 2000

Reclamation and recycling of mercury from used mercury- containing products and treatment of byproduct mercury from gold mining is vital to the continued, though declining, use of this metal. Mercury is reclaimed from mercury-containing waste by treatment in multistep high-temperature retorts-the mercury is volatized and then condensed for purification and sale. Some mercury-containing waste, however, may be landfilled, and landfilled material represents loss of a recyclable resource and a threat to the environment. Related issues include mercury disposal and waste management, toxicity and human health, and regulation of mercury releases in the environment. End-users of mercury-containing products may face fines and prosecution if these products are improperly recycled or not recycled. Local and State environmental regulations require adherence to the Resource Conservation and Recovery Act and the Comprehensive Environmental Response, Compensation, and Liability Act to regulate generation, treatment, and disposal of mercury-containing products. In the United States, several large companies and a number of smaller companies collect these products from a variety of sources and then reclaim and recycle the mercury. Because mercury has not been mined as a principal product in the United States since 1992, mercury reclamation from fabricated products has become the main source of mercury. Principal product mercury and byproduct mercury from mining operations are considered to be primary materials. Mercury may also be obtained as a byproduct from domestic or foreign gold-processing operations. In the early 1990s, U.S. manufacturers used an annual average that ranged from 500 to 600 metric tons of recycled and imported mercury for fabrication of automobile convenience switches, dental amalgam, fluorescent lamps, medical uses and thermometers, and thermostats. The amount now used for fabrication is estimated to be 200 metric tons per year or less. Much of the data on mercury is estimated because it is a low-volume commodity and its production, use, and disposal is difficult to track. The prices and volumes of each category of mercury-containing material may change dramatically from year to year. For example, the average price of mercury was approximately $150 per flask from 2000 until 2003 and then rose sharply to $650 per flask in fall 2004 and approximately $850 per flask in spring 2005. Since 1927, the common unit for measuring and pricing mercury has been the flask in order to conform to the system used at Almaden, Spain (Meyers, 1951). One flask weighs 34.5 kilograms, and 29 flasks of mercury are contained in a metric ton. In the United States, the chlorine-caustic soda industry, which is the leading end-user of elemental mercury, recycles most of its mercury in-plant as home scrap. Annual purchases of replacement mercury by the chlorine-caustic soda industry indicate that some mercury may be lost through evaporation to the environment, put into a landfill as industrial waste, or trapped within pipes in the plant. Impending closure of domestic and foreign mercury-cell chlorine-caustic soda plants and the shift to nonmercury technology for chlorine-caustic soda production could ultimately result in a significant volume of elemental mercury for recycling, sale, or storage. Globally, mercury is widely used in artisanal, or small-scale, gold mining. Most of that mercury is lost to the environment and is not recycled. The recycling rate for mercury was not available owing to insufficient data in 2000, and the efficiency of mercury recycling was estimated to be 62 percent.

Open-File Report↗

Geologic map of Big Bend National Park, Texas

The purpose of this map is to provide the National Park Service and the public with an updated digital geologic map of Big Bend National Park (BBNP). The geologic map report of Maxwell and others (1967) provides a fully comprehensive account of the important volcanic, structural, geomorphological, and paleontological features that define BBNP. However, the map is on a geographically distorted planimetric base and lacks topography, which has caused difficulty in conducting GIS-based data analyses and georeferencing the many geologic features investigated and depicted on the map. In addition, the map is outdated, excluding significant data from numerous studies that have been carried out since its publication more than 40 years ago. This report includes a modern digital geologic map that can be utilized with standard GIS applications to aid BBNP researchers in geologic data analysis, natural resource and ecosystem management, monitoring, assessment, inventory activities, and educational and recreational uses. The digital map incorporates new data, many revisions, and greater detail than the original map. Although some geologic issues remain unresolved for BBNP, the updated map serves as a foundation for addressing those issues. Funding for the Big Bend National Park geologic map was provided by the United States Geological Survey (USGS) National Cooperative Geologic Mapping Program and the National Park Service. The Big Bend mapping project was administered by staff in the USGS Geology and Environmental Change Science Center, Denver, Colo. Members of the USGS Mineral and Environmental Resources Science Center completed investigations in parallel with the geologic mapping project. Results of these investigations addressed some significant current issues in BBNP and the U.S.-Mexico border region, including contaminants and human health, ecosystems, and water resources. Funding for the high-resolution aeromagnetic survey in BBNP, and associated data analyses and interpretation, was from the USGS Crustal Geophysics and Geochemistry Science Center. Mapping contributed from university professors and students was mostly funded by independent sources, including academic institutions, private industry, and other agencies.

Texas↗

Arsenic hazards to humans, plants, and animals from gold mining

Arsenic sources to the biosphere associated with gold mining include waste soil and rocks, residual water from ore concentrations, roasting of some types of gold-containing ores to remove sulfur and sulfur oxides, and bacterially-enhanced leaching. Arsenic concentrations near gold mining operations were elevated in abiotic materials and biota: maximum total arsenic concentrations measured were 560 μg /L in surface waters, 5.16 mg/L in sediment pore waters, 5.6 mg/kg dry weight (DW) in bird liver, 27 mg/kg DW in terrestrial grasses, 50 mg/kg DW in soils, 79 mg/kg DW in aquatic plants, 103 mg/kg DW in bird diets, 225 mg/kg DW in soft parts of bivalve molluscs, 324 mg/L in mine drainage waters, 625 mg/kg DW in aquatic insects, 7700 mg/kg DW in sediments, and 21,000 mg/kg DW in tailings. Single oral doses of arsenicals that were fatal to 50% of tested species ranged from 17 to 48 mg/kg body weight (BW) in birds and from 2.5 to 33 mg/kg BW in mammals. Susceptible species of mammals were adversely affected at chronic doses of 1 to 10 mg As/kg BW, or 50 mg As/kg diet. Sensitive aquatic species were damaged at water concentrations of 19 to 48 μg As/L, 120 mg As/kg diet, or tissue residues (in the case of freshwater fish) >1.3 mg/kg fresh weight. Adverse effects to crops and vegetation were recorded at 3 to 28 mg of water-soluble As/L (equivalent to about 25 to 85 mg total As/kg soil) and at atmospheric concentrations >3.9 μg As/m3. Gold miners had a number of arsenic-associated health problems including excess mortality from cancer of the lung, stomach, and respiratory tract. Miners and schoolchildren in the vicinity of gold mining activities had elevated urine arsenic of 25.7 μg/L (range 2.2-106.0 μg/L ). Of the total population at this location, 20% showed elevated urine arsenic concentrations associated with future adverse health effects; arsenic-contaminated drinking water is the probable causative factor of elevated arsenic in urine. Proposed arsenic criteria to protect human health and natural resources are listed and discussed. Many of these proposed criteria do not adequately protect sensitive species.

Archives of Environmental Contamination and Toxico↗

Chlorinated byproducts of neonicotinoids and their metabolites: An unrecognized human exposure potential?

We recently reported the initial discovery of neonicotinoid pesticides in drinking water and their potential for transformation through chlorination and alkaline hydrolysis during water treatment. The objectives of this research were: (1) to determine if neonicotinoid metabolites are relevant to drinking water exposure and (2) to identify the products formed from chlorination of neonicotinoids and their metabolites. Desnitro-imidacloprid and imidacloprid-urea, two known metabolites of imidacloprid, are documented for the first time in drinking water. Desnitro-imidacloprid was present above the lower level of detection (0.03 ng/L) in 67% of samples (six of nine) from drinking water systems but detectable in all samples (up to 0.6 ng/L). Although concentrations of desnitro-imidacloprid were lower than concentrations of the parent neonicotinoids, desnitro-imidacloprid exhibits significantly greater mammalian toxicity than imidacloprid. Using LC-HR-ToF-MS/MS analysis of results from laboratory experiments, we propose structures for novel transformation products resulting from the chlorination of clothianidin, imidacloprid, desnitro-imidacloprid, imidacloprid-urea, and hydrolysis products of thiamethoxam. Formation of chlorinated neonicotinoid byproducts occurs at time scales relevant to water treatment and/or distribution for the imidacloprid metabolites ( t 1/2 values from 2.4 min to 1.0 h) and thiamethoxam hydrolysis products (4.8 h). Neonicotinoid metabolites in finished drinking water and potential formation of novel disinfection byproducts during treatment and/or distribution are relevant to evaluating the exposure and potential impacts of neonicotinoids on human health.

Environmental Science & Technology Letters↗

Effects of mercury deposition and coniferous forests on the mercury contamination of fish in the south central United States

Mercury (Hg) is a toxic metal that is found in aquatic food webs and is hazardous to human and wildlife health. We examined the relationship between Hg deposition, land coverage by coniferous and deciduous forests, and average Hg concentrations in largemouth bass (Micropterus salmoides)-equivalent fish (LMBE) in 14 ecoregions located within all or part of six states in the South Central U.S. In 11 ecoregions, the average Hg concentrations in 35.6-cm total length LMBE were above 300 ng/g, the threshold concentration of Hg recommended by the U.S. Environmental Protection Agency for the issuance of fish consumption advisories. Percent land coverage by coniferous forests within ecoregions had a significant linear relationship with average Hg concentrations in LMBE while percent land coverage by deciduous forests did not. Eighty percent of the variance in average Hg concentrations in LMBE between ecoregions could be accounted for by estimated Hg deposition after adjusting for the effects of coniferous forests. Here we show for the first time that fish from ecoregions with high atmospheric Hg pollution and coniferous forest coverage pose a significant hazard to human health. Our study suggests that models that use Hg deposition to predict Hg concentrations in fish could be improved by including the effects of coniferous forests on Hg deposition.

Arkansas;Louisiana;Mississippi;Oklahoma;Tennessee;↗

Pollution and wildlife health

Pollution is a pervasive and growing threat to wildlife health. This chapter discusses two broad groups of pollution, those whose abatement could have immediate beneficial effects including light, air, and noise pollution, and those that will take relatively longer to address due to their environmental persistence or their continuing discharge. Whilst we are very good at detecting the presence of pollutants in tissues or the environment, making a convincing link between the presence of these compounds and mortality events in the field or population effects will remain a challenge for the foreseeable future. Creative new approaches are also being considered to mitigate the effects of pollution on wildlife and ecosystems. Depending on the source of pollution, the beneficial outcomes of mitigation measures, if properly implemented, could have immediate effects. Given the plethora of potential adverse pollution effects, frameworks to prioritize which threats are most likely to cause adverse effects and develop means to address or manage them are an imperative. In the interim, focusing on preserving existing habitats and reducing our footprint by adjusting human activities to minimize the release of pollutants into the environment will go a long way toward promoting healthy wildlife and ecosystems.

Book chapter↗

Applications of fluorescence spectroscopy for predicting percent wastewater in an urban stream

Dissolved organic carbon (DOC) is a significant organic carbon reservoir in many ecosystems, and its characteristics and sources determine many aspects of ecosystem health and water quality. Fluorescence spectroscopy methods can quantify and characterize the subset of the DOC pool that can absorb and re-emit electromagnetic energy as fluorescence and thus provide a rapid technique for environmental monitoring of DOC in lakes and rivers. Using high resolution fluorescence techniques, we characterized DOC in the Tualatin River watershed near Portland, Oregon, and identified fluorescence parameters associated with effluent from two wastewater treatment plants and samples from sites within and outside the urban region. Using a variety of statistical approaches, we developed and validated a multivariate linear regression model to predict the amount of wastewater in the river as a function of the relative abundance of specific fluorescence excitation/emission pairs. The model was tested with independent data and predicts the percentage of wastewater in a sample within 80% confidence. Model results can be used to develop in situ instrumentation, inform monitoring programs, and develop additional water quality indicators for aquatic systems.

Oregon↗

New York Water-Use Program and data, 2000

The U.S. Geological Survey (USGS) has been publishing estimates of water use every five years since 1950 in the Estimated use of water in the United States circular series. In 1978, the Congress expanded the water-use activities of the USGS by establishing the National Water-Use Information Program (NWUIP). The water-use program in New York is part of the NWUIP and is based on a cooperative agreement between the USGS and the New York State Department of Environmental Conservation (NYSDEC). Together, the NYSDEC and USGS collect, compile, and store water-use data to provide a data base that is useful for water-resources management. The New York State Department of Health (NYSDOH) collects a wide variety of data elements relating to public-water supplies such as the name and location of the suppliers and the amount of water withdrawn. This valuable information is provided to the water-use program. The information summarized in this fact sheet has been published in U.S. Geological Survey Circular 1268, Estimated use of water in the United States in 2000 which can be accessed at http://water.usgs.gov/watuse . The 2000 data (by county) as well as previous years data can also be found at that site. Water withdrawal refers to the removal of water from the ground or its diversion from a surface-water source for use. Withdrawals of fresh and saline surface water and fresh ground water during 2000 were included in this study. The categories considered in this data compilation are public-water supply; deliveries to domestic from public-water suppliers and domestic self-supplied; industrial; thermoelectric-power generation; and irrigation. Saline withdrawals were included for the categories of industrial, mining, and thermoelectric-power generation. Saline water is a significant percentage of total withdrawals for the category of thermoelectric-power generation. The categories of withdrawal for which data were compiled for the 2000 calendar year do not include some of the categories that were addressed in 1995 and published in USGS Circular 1200, Estimated use of water in the United States in 1995. For the 2000 compilation, emphasis was placed on ensuring the quality of data that were collected, rather than attempting to address all categories and data elements on a national scale. Categories that were included in 1995 but not in 2000 are commercial; livestock; mining; the non-withdrawal categories of hydroelectric-power generation, wastewater treatment and public-water supply deliveries to commercial and industrial users. Any comparison made between 1995 and 2000 data need to be made with these category differences in mind. In 1995, the categories of commercial, livestock, and mining were about 280 Mgal/d (million gallons per day) of freshwater and 2.7 percent of total freshwater withdrawals. In addition, the report, New York water-use program and data, 1995, U. S. Geological Survey Fact Sheet 014-02, concentrated on freshwater and did not include saline-surface water withdrawals in the figures. Any comparison between the 1995 and 2000 figures need to be made with this in mind. In 2000, about 12,100 Mgal/d (million gallons per day) of fresh surface and ground water and saline surface water were withdrawn from New York's rivers, streams, lakes, estuaries, bays, and aquifers for the categories addressed. Freshwater withdrawals comprised about 7,080 Mgal/d of this total. With a total population of 18,980,000 people in New York State, the total freshwater withdrawals represent an average of more than 370 gal/d (gallons per day) per capita. The amounts of fresh surface water, ground water, saline surface water, and total amounts of water withdrawn by categories of water use in New York during 2000 are shown. Many of New York's large population centers have developed along major rivers and lakes; as a result, more than 87 percent of the freshwater withdrawals in 2000 were from surface-water bodies (6,190 Mgal/d). More than 65 percent of fresh surface-water withdrawals were for thermoelectric-power generation, and about 32 percent were by public-water suppliers. Of the 890 Mgal/d of ground water withdrawn in 2000 statewide, 65 percent was withdrawn by public-water suppliers, and about 16 percent each by industrial and domestic users. More freshwater is withdrawn by thermoelectric plants than for any other water-use category. Of the freshwater withdrawals within New York, about 57 percent were made by fossil-fuel and nuclear powerplants; about 36 percent were for public-water supply; about 4.2 percent was by industrial users, 2.0 percent by domestic users, and about 0.5 percent was for irrigation. Total withdrawals, total surface-water and fresh ground-water withdrawals, in New York are plotted, by county. The categories of public-water supply and thermoelectric power account for the withdrawals that exceed 100 Mgal/d per county. The counties that have public-water supply withdrawals that exceed 100 Mgal/d are: Delaware (453 Mgal/d), Ulster, Nassau, Erie, Sullivan, Westchester, Suffolk, Putnam, and Schoharie (115 Mgal/d). These large withdrawals are from surface water except in Nassau and Suffolk Counties on Long Island, where groundwater is the sole source of freshwater. Delaware, Putnam, Schoharie, Sullivan, Ulster, and Westchester Counties, in the southeastern part of the State, provide surface water to the aqueducts that supply drinking water to New York City. In 2000, the average amount of water delivered to New York City from these counties averaged 1,260 Mgal/d. Erie County, in western New York, had withdrawals totaling 176 Mgal/d of fresh surface water for public-water supply. More freshwater and more total water is withdrawn for the generation of thermoelectric power than for any other water-use category. All of the withdrawals are of surface water. Seven counties have total thermoelectric withdrawals that exceed 500 Mgal/d: Queens (1,690 Mgal/d), Westchester, Oswego, Suffolk, Erie, Orange, and Rockland (560 Mgal/d). The counties of Oswego, Erie, and Orange withdrew only fresh surface water for thermoelectric plants. Their sources of water were Lake Ontario (Oswego County), Niagara River (Erie County), and the Hudson River (Orange County). Queens, Westchester, Suffolk, and Rockland withdraw only saline surface water for the production of thermoelectric power. The sources of saline surface water for the thermoelectric plants in the counties of Queens, Westchester, Suffolk, and Rockland are the estuaries of the Hudson River and East River and bays of the Atlantic Ocean (Long Island Sound and the eastern shore of Jamaica Bay). New York ranked eighth in the United States in 2000 in total withdrawals (fresh and saline water); the States that exceeded New York in total withdrawals are those that have large populations (such as California and Texas) and (or) use large quantities of water for irrigation (such as Florida and Idaho). Of the categories considered for the 2000 compilation, New York did not have nationally significant withdrawals for either irrigation or industrial water use. New York ranked third after California and Texas in withdrawals of freshwater for public supply, in the withdrawal of fresh surface water for public-water supply, in total population, and in number of people served by public-water supplies. New York ranked sixth in total withdrawals for the generation of thermoelectric power and total surface-water withdrawals. Finally, New York ranked fourth in withdrawals of ground water for public supply.

Open-File Report↗

Ground-Water Quality in the Genesee River Basin, New York, 2005-2006

Water samples were collected from 7 community water system wells and 15 private domestic wells throughout the Genesee River Basin in New York State (downstream from the Pennsylvania border) from October 2005 through March 2006 and analyzed to characterize the chemical quality of ground water in the basin. The wells were selected to represent areas of greatest ground-water use and to provide a representative sampling from the 2,439 square-mile basin area in New York. Samples were analyzed for five physical properties and 226 constituents that included nutrients, major inorganic ions, trace elements, radionuclides, pesticides, volatile organic compounds, and bacteria. The results show that ground water used for drinking water is generally of good quality in the Genesee River Basin, although concentrations of seven constituents exceeded drinking water standards. The cations that were detected in the highest concentrations were calcium, magnesium, and sodium; the anions that were detected in the greatest concentrations were bicarbonate, chloride, and sulfate. The predominant nutrient was nitrate, and nitrate concentrations were greater in samples from sand and gravel aquifers than in samples from bedrock aquifers. The trace elements barium, boron, cobalt, copper, and nickel were detected in every sample; the highest concentrations were barium, boron, chromium, iron, manganese, strontium, and lithium. Fourteen pesticides including seven pesticide degradates were detected in water from 12 of the 22 wells, but none of the concentrations exceeded Maximum Contaminant Levels (MCLs). Eight volatile organic compounds (VOCs) were detected in six samples, but none of the concentrations exceeded MCLs. Seven chemical analytes and three types of bacteria were present in concentrations that exceeded Federal and New York State water-quality standards, which are typically identical. Sulfate concentrations exceeded the U.S. Environmental Protection Agency (USEPA) Secondary Maximum Contaminant Level (SMCL) of 250 milligrams per liter (mg/L) in three samples; the chloride SMCL (250 mg/L) was exceeded in one sample. Sodium concentrations exceeded the USEPA Drinking Water Health Advisory of 60 mg/L in five samples. The SMCL for iron (300 ug/L) was exceeded in 11 filtered samples; the USEPA SMCL for manganese (50 ug/L) was exceeded in 10 filtered samples, and the New York State MCL (300 ug/L) was exceeded in 1 filtered sample. The MCL for aluminum (200 ug/L) was exceeded in 1 sample, and the MCL for arsenic (10 ug/L) was exceeded in 1 sample. Radon-222 exceeded the proposed USEPA MCL of 300 picocuries per liter in 16 samples. Any detection of total coliform or fecal coliform bacteria is considered a violation of New York State health regulations; in this study, total coliform was detected in eight samples; fecal coliform was detected in two samples, and Escherichia coli was detected in one sample.

Open-File Report↗

Analysis of groundwater response to tidal fluctuations, Operable Unit 2, Area 8, Naval Base Kitsap, Keyport, Washington

Operable Unit 2, Area 8, at Naval Base Kitsap, Keyport is the site of a former chrome-plating facility that released metals (primarily chromium and cadmium), chlorinated volatile organic compounds, and petroleum compounds into the local environment. To ensure long-term protectiveness, as stipulated in the Fourth Five-Year Review for the site, Naval Facilities Engineering Command Northwest collaborated with the U.S. Environmental Protection Agency, the Washington State Department of Ecology, and the Suquamish Tribe, to collect data to monitor the contamination left in place and to ensure the site does not pose a risk to human health or the environment. To support these efforts, refined information was needed on the interaction of fresh groundwater with seawater in response to the up-to 13-ft tidal fluctuations at this nearshore site adjacent to Port Orchard Bay. The information was analyzed to meet the primary objective of this investigation, which was to determine the optimal time during the semi-diurnal and the neap-spring tidal cycles to sample groundwater for freshwater contaminants in Area 8 monitoring wells. Groundwater levels and specific conductance in five monitoring wells, along with marine water-levels (tidal levels) in Port Orchard Bay, were monitored every 15 minutes during a 3-week duration to determine how nearshore groundwater responds to tidal forcing. Time series data were collected from October 24, 2017, to November 16, 2017, a period that included neap and spring tides. Vertical profiles of specific conductance were also measured once in the screened interval of each well prior to instrument deployment to determine if a freshwater/saltwater interface was present in the well during that particular time. The vertical profiles of specific conductance were measured only one time during an ebbing tide at approximately the top, middle, and bottom of the saturated thickness within the screened interval of each well. The landward-most well, MW8-8, was completely freshwater, while one of the most seaward wells, MW8-9, was completely saline. A distinct saltwater interface was measured in the three other shallow wells (MW8-11, MW8-12, and MW8-14), with the topmost groundwater occurring fresh underlain by higher conductivity water. Lag times between minimum spring-tide level and minimum groundwater levels in wells ranged from about 2 to 4.5 hours in the less-than 20-ft deep wells screened across the water table, and was about 7 hours for the single 48-ft deep well screened below the water table. Those lag times were surprisingly long considering the wells are all located within 200-ft of the shoreline and the local geology is largely coarse-grained glacial outwash deposits. Various manmade subsurface features, such as slurry walls and backfilled excavations, likely influence and confuse the connectivity between seawater and groundwater. The specific-conductance time-series data showed clear evidence of substantial saltwater intrusion into the screened intervals of most shallow wells. Unexpectedly, the intrusion was associated with the neap part of the tidal cycle around November 13–16, when relatively low barometric pressure and high southerly winds led to the highest high and low tides measured during the monitoring period. The data consistently indicated that the groundwater had the lowest specific conductance (was least mixed with seawater) during the prior neap tides around October 30, the same period when the shallow groundwater levels were lowest. Although the specific conductance response is somewhat different between wells, the data do suggest that it is the heights of the actual high-high and low-low tides, regardless of whether or not they occur during the neap or spring part of the cycle, that allows seawater intrusion into the nearshore aquifer at Area 8. With all the data taken into consideration, the optimal time for sampling the shallow monitoring wells at Area 8 would be centered on a 2–5-hour period following the predicted low-low tide during neap tide, with due consideration of local atmospheric pressure and wind conditions that have the potential to generate tides that can be substantially higher than those predicted from lunar-solar tidal forces. The optimal time for sampling the deeper monitoring wells at Area 8 would be during the 6–8-hour period following a predicted low-low tide, also during the neap tide part of the tidal cycle. The specific time window to sample each well following a low tide can be found in table 5. Those periods are when groundwater in the wells is most fresh and least diluted by seawater intrusion. In addition to timing, consideration should be given to collecting undisturbed samples from the top of the screened interval (or top of the water table if below the top of the interval) to best characterize contaminant concentrations in freshwater. A downhole conductivity probe could be used to identify the saltwater interface, above which would be the ideal depth for sampling.

Washington↗