Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Ground Water”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60Linked to original sources
USGS2005

Simulation of ground-water flow in the basin-fill aquifer of the Tularosa Basin, south-central New Mexico, predevelopment through 2040

The hydrology of the basin-fill aquifer in the Tularosa Basin was evaluated through construction and calibration of steady-state and transient three-dimensional ground-water-flow simulations. Simulations were made using the U.S. Geological Survey finite-difference modular ground-water-flow computer software MODFLOW-96. The transient simulation covered 1948-2040. Both steady-state and transient simulations were calibrated by matching simulation output to available ground-water-level measurements. The root-mean-square error of the steady-state calibration in the well-calibrated area of the ground-water-flow simulation was 6.3 meters, and root-mean-square errors of individual transient-calibration points ranged from 0.8 to 17.0 meters. The areal distribution of water-level measurements used in the steady-state and transient calibrations restricts the well-calibrated area of the model to the eastern side of the Tularosa Basin. Water levels in the La Luz Creek subbasin area were underestimated by both the steady-state and transient models, suggesting that the hydrology of this area is not well represented in the model. About 143,000 cubic meters per day of recharge is estimated to enter the basin-fill aquifer from subbasins that rim the Tularosa Basin. The estimated recharge is about 4-5 percent of total precipitation in most subbasins. Approximately 88 percent of total recharge left the basin-fill aquifer as evapotranspiration under predevelopment conditions. Water levels were simulated for 1948, 1995, and 2040 under scenarios of zero and maximum return flows. Estimated return flows from municipalities were calculated on the basis of data in the Tularosa Basin Regional Water Plan for 2000-2040. Agricultural return flows were estimated primarily on the basis of ground-water-withdrawal, ground-water-depletion, surface-water-withdrawal, and surface-water-depletion data for the Tularosa Basin. The ground-water-flow simulation was sensitive to the return-flow scenario in the agricultural area near Tularosa and decreasingly sensitive to the south. Declines in simulated water levels near Tularosa between 1948 and 1995 were as large as 30 meters under the zero return-flow scenario and 15 meters under the maximum return-flow scenario. Declines in simulated water levels between 1995 and 2040 were as large as 25 meters under the zero return-flow scenario and 15 meters under the maximum return-flow scenario. Comparison of water levels measured near Tularosa in 1991 and water levels simulated under the maximum return-flow scenario for 1991 suggests that declines in simulated water levels near Tularosa may be overestimated under the zero return-flow scenario. Declines in simulated water levels near the City of Alamogordo well field between 1948 and 1995 were as large as 15 meters under the zero return-flow scenario and 10 meters under the maximum return-flow scenario. Simulated declines in water levels between 1995 and 2040 were nearly 15 meters under both return-flow scenarios assuming that all projected increases in withdrawal came from existing City of Alamogordo public-supply wells and all withdrawal from the wells came from the basin-fill aquifer. Declines in simulated water levels near the Holloman Air Force Base well fields between 1948 and 1995 and between 1995 and 2040 were less than 5 meters under both the zero and maximum return-flow scenarios. In 1995 under the zero return-flow scenario, an estimated 56,000 cubic meters of water per day was removed from aquifer storage. Of the approximately 199,000 cubic meters of water per day that left the aquifer under 1995 conditions, 40 percent left the basin-fill aquifer as ground-water withdrawal, 51 percent as evapotranspiration, 7 percent by interbasin ground-water flow into the Hueco Bolson, and 2 percent by flow into creeks and springs. Generalized directions of ground-water flow were simulated for 1948, 1995, and 2040 for much of the eastern part of the Tularosa Basin. Localized

Scientific Investigations Report↗
USGS1958

Preliminary report on ground water in the Bonanza Lake area, Power and Blaine counties, Idaho

The investigation in the Bonanza Lake area of northwestern Power and southeastern Blaine Counties was made to determine the direction of ground-water movement and to ascertain the relation of the regional ground-water body to the Snake River. The surface of the area is nearly flat to gently rolling, and slopes to the west. Lake Channel, an abandoned channel of the Snake River, and a few volcanic cones modify the gentle relief. The climate is semiarid, the annual precipitation ranging from 10 to 15 inches. Most of the area is uncultivated and covered with sagebrush, the predominate vegetation. A significant amount of the area is dry farmed; about 500 to 650 acres is irrigated with ground water pumped from wells or from ponds in Lake Channel. The Bonanza area and vicinity are underlin by windblown deposits of Recent age (not shown on the geologic map); alluvium with admixed windblown material and black basalt, both also of Recent age; undifferentiated Snake River basalt, of Pliocene to Recent age; the American Falls lake beds and Cedar Butte basalt, or Pleistocene age; of the Raft Lake beds and Massacre volcanic and associated rocks, of Pliocene(?) age. The alluvium contains ground water at shallow depth, but because of its limited areal extent it is not an important aquifer, The Snake River basalt is the most important aquifer in the area and yields water to irrigation, domestic, and stock wells. Several springs discharge from the basalt into Lake Walcott. The Cedar Butte basalt is a major aquifer supplying water to a number of stock and domestic wells and to Bonanza Lake. Ground water moves southward and southwestward through the area from the Aberseen-Springfield tract on the northeast and possibly from the downstream end of American Falls Reservoir. Part of the ground water is discharged to the Snake River and Lake Walcott and part moves westward out of the area of the main ground-water body. The amount of ground water can not be determined from the data bow available. Data from dam-site borings and wells suggest the possibility that a part of the ground water in the area may be perched above the regional water table.

Idaho↗
USGS1964

Ground water in Fountain and Jimmy Camp Valleys, El Paso County, Colorado

The part of Fountain Valley considered in this report extends from Colorado Springs to the Pueblo County line. It is 23 miles long and has an area of 26 square miles. The part of Jimmy Camp Valley discussed is 11 miles long and has an area of 9 square miles. The topography is characterized by level flood plains and alluvial terraces that parallel the valley and by rather steep hills along the valley sides. The climate is semiarid, average annual precipitation being about 13 inches. Farming and stock raising are the principal occupations in the valleys; however, some of the agricultural land near Colorado Springs is being used for housing developments. The Pierre Shale and alluvium underlie most of the area, and mesa gravel caps the shale hills adjacent to Fountain Valley. The alluvium yields water to domestic, stock, irrigation, and public-supply wells and is capable of yielding large quantities of water for intermittent periods. Several springs issue along the sides of the valley at the contact of the mesa gravel and the underlying Pierre Shale. The water table ranges in depth from less than 10 feet along the bottom lands to about 80 feet along the sides of the valleys; the saturated thickness ranges from less than a foot to about 50 feet. The ground-water reservoir in Fountain Valley is recharged by precipitation that falls within the area, by percolation from Fountain Creek, which originates in the Pikes Peak, Monument Valley, and Rampart Range areas, and by seepage from irrigation water. This reservoir contains about 70,000 acre-feet of ground water in storage. The ground-water reservoir in Jimmy Camp Valley is recharged from precipitation that falls within the area, by percolation from Jimmy Camp Creek during periods of streamflow, and by seepage from irrigation water. The Jimmy Camp ground-water reservoir contains about 25,000 acre-feet of water in storage. Ground water is discharged from the area by movement to the south, by evaporation and transpiration in areas of shallow water table, by seepage into Fountain and Jimmy Camp Creeks, and through wells. About 3 to 4 mgd (million gallons per day) of ground water moves through the Fountain Valley alluvium at a velocity of about 15 feet per day. About 1 mgd of ground water moves through the Jimmy Camp Valley alluvium at a velocity of about 6 feet per day. Most of the wells in the area are drilled, but a few are dug. Many large-diameter wells are used for irrigation and public supply: one of the wells

Colorado↗
USGS1991

Simulation of effects of ground-water development on water-levels in glacial-drift aquifers in the Brooten-Belgrade area, west-central Minnesota

Ground-water flow in the confined- and unconfined-drift aquifers in the Brooten-Belgrade area of west-central Minnesota was simulated with a three-dimensional finite-difference ground-water-flow model. Model results indicate that about 96 percent of the total inflow to the modeled area is from precipitation. Discounting evapotranspiration, 63 percent of the total outflow is ground-water discharge to the East Branch Chippewa and North Fork Crow Rivers, and 34 percent is ground-water pumpage. The model was used to simulate the steady-state effects of below-normal precipitation (drought) and hypothetical increases in ground-water development. Model results indicate that reduced recharge and increased pumping during a hypothetical 3-year extended drought would lower regional water levels from 2 to 5 feet in each aquifer and as much as 20 feet in the lowermost aquifer zone; ground-water discharge to the East Branch Chippewa and North Fork Crow Rivers would be reduced by 38 percent. The addition of 10 to 20 hypothetical wells in confined aquifers, pumping 123 to 246 million gallons per year, would result in regional water-level declines of 0.1 to 0.5 feet. Simulated water-level declines in wells completed in the lower part of the system would be as much as 5.0 feet as a result of pumping 246 million gallons per year from 20 hypothetical wells. Water-level declines in overlying and underlying aquifers would range from 0.4 to 2.8 feet. Ground-water discharge to the East Branch Chippewa and North Fork Crow Rivers would be unaffected by the pumpage.

Minnesota↗
USGS2004

Simulation of ground-water flow in the Cedar River alluvial aquifer flow system, Cedar Rapids, Iowa

The Cedar River alluvial aquifer is the primary source of municipal water in the Cedar Rapids, Iowa, area. Since 1992, the U.S. Geological Survey, in cooperation with the City of Cedar Rapids, has investigated the hydrogeology and water quality of the Cedar River alluvial aquifer. This report describes a detailed analysis of the ground-water flow system in the alluvial aquifer, particularly near well field areas. The ground-water flow system in the Cedar Rapids area consists of two main components, the unconsolidated Quaternary deposits and the underlying carbonate bedrock that has a variable fracture density. Quaternary deposits consist of eolian sand, loess, alluvium, and glacial till. Devonian and Silurian bedrock aquifers overlie the Maquoketa Shale (Formation) of Ordovician age, a regional confining unit. Ground-water and surface-water data were collected during the study to better define the hydrogeology of the Cedar River alluvial aquifer and Devonian and Silurian aquifers. Stream stage and discharge, ground-water levels, and estimates of aquifer hydraulic properties were used to develop a conceptual ground-water flow model and to construct and calibrate a model of the flow system. This model was used to quantify the movement of water between the various components of the aluvial aquifer flow system and provide an improved understanding of the hydrology of the alluvial aquifer. Ground-water flow was simulated for the Cedar River alluvial aquifer and the Devonian and Silurian aquifers using the three-dimensional finite-difference ground-water flow model MODFLOW. The model was discretized into 223 rows and 354 columns of cells. Areal cell sizes range from about 50 feet on a side near the Cedar River and the Cedar Rapids municipal wells to 1,500 feet on a side near the model boundaries and farthest away from the Cedar Rapids municipal well fields. The model is separated into five layers to account for the various hydrogeologic units in the model area. Model results indicate that the primary sources of inflow to the modeled area are infiltration from the Cedar River (53.0 percent) and regional flow in the glacial and bedrock materials (34.1 percent). The primary sources of outflow from the modeled area are discharge to the Cedar River (45.4 percent) and pumpage (44.8 percent). Current steady-state pumping rates have increased the flow of water from the Cedar River to the alluvial aquifer by 43.8 cubic feet per second. Steady-state and transient hypothetical pumpage scenarios were used to show the relation between changes in pumpage and changes in infiltration of water from the Cedar River. Results indicate that more than 99 percent of the water discharging from municipal wells infiltrates from the Cedar River, that the time required for induced river recharge to equilibrate with municipal pumpage may be 150 days or more, and that ground-water availability in the Cedar Rapids area will not be significantly affected by doubling current pumpage as long as there is sufficient flow in the Cedar River to provide recharge.

Iowa↗
USGS2007

Ground-water age and quality in the High Plains Aquifer near Seward, Nebraska, 2003-04

The U.S. Geological Survey, in cooperation with the City of Seward, Nebraska, conducted a study of ground-water age and quality to improve understanding of: (1) traveltimes from recharge areas to public-supply wells, (2) the effects of geochemical reactions in the aquifer on water quality, and (3) how water quality has changed historically in response to land-use practices. Samples were collected from four supply wells in the Seward west well field and from nine monitoring wells along two approximate ground-water flow paths leading to the well field. Concentrations of three different chlorofluorocarbons (CFC-12, CFC-11, and CFC-113), sulfur hexafluoride (SF 6 ), and ratios of tritium ( 3 H) to helium-3 ( 3 He) isotope derived from radioactive decay of 3H were used to determine the apparent recharge age of ground-water samples. Age interpretations were based primarily on 3 H/ 3 He and CFC-12 data. Estimates of apparent ground-water age from tracer data were complicated by mixing of water of different ages in 10 of the 13 ground-water samples collected. Apparent recharge dates of unmixed ground-water samples or mean recharge dates of young fractions of mixed water in samples collected from monitoring wells ranged from 1985 to 2002. For monitoring-well samples containing mixed water, the fraction of the sample composed of young water ranged from 26 to 77 percent of the sample. Apparent mean recharge dates of young fractions in samples collected from four supply wells in the Seward west well field ranged from about 1980 to 1990. Estimated fractions of the samples composed of young water ranged from 39 to 54 percent. It is implicit in the mixing calculations that the remainder of the sample that is not young water is composed of water that is more than 60 years old and contains no detectable quantities of modern atmospheric tracers. Estimated fractions of the mixed samples composed of "old" water ranged from 23 to 74 percent. Although alternative mixing models can be used to interpret the results, the mean age and mixing fractions from the primary mixing models used were fairly similar. Relations of ground-water age and nitrate concentrations to depth were not consistent across the study area. In some well nests, more young water and nitrate were present near the bottom than in the middle of the aquifer. These results probably reflect pumping from irrigation and supply wells, which are screened primarily in the lower part of the aquifer, and draw younger water downward in the aquifer. Substantial mixing probably occurs because the aquifer is relatively thin (50 feet) and has a relatively high density of wells (about five pumping wells per square mile). The most reliable estimate of horizontal traveltimes based on differences in ground-water ages between a shallow monitoring well at the upgradient end of the northwest well transect and the deep well at the downgradient end of the well transect was 9 years to travel a distance of about 2 miles. The general similarity of ages at similar depths between different well nests is consistent with the fact that horizontal flow in the aquifer is relatively rapid. Concentrations of nitrate (as nitrogen) in untreated ground-water samples from supply wells in the well field were larger than the U.S. Environmental Protection Agency Maximum Contaminant Level for drinking water of 10 mg/L (milligrams per liter), ranging from 11.3 to 13.5 mg/L. It is unlikely that nitrate concentrations in the aquifer near the Seward west well field are decreased by denitrification in the aquifer due to oxic geochemical conditions that preclude this reaction. Nitrate concentrations coupled with water recharge dates were compared to historical estimated fertilizer application in an attempt to reconstruct historical trends in ground-water nitrate concentrations and their relation to land-use practices. Nitrate concentrations in young-water fractions, after adjustment for mixing, may be decreasing over apparent recharge dates of 1980 to 2002, corresponding to a period of generally decreasing nitrogen fertilizer applications.

Nebraska↗
USGS2003

Estimated ground-water discharge by evapotranspiration from Death Valley, California, 1997-2001

The U.S. Geological Survey, in cooperation with the National Park Service and Inyo County, Calif., collected field data from 1997 through 2001 to accurately estimate the amount of annual ground-water discharge by evapotranspiration (ET) from the floor of Death Valley, California. Multispectral satellite-imagery and National Wetlands Inventory data are used to delineate evaporative ground-water discharge areas on the Death Valley floor. These areas are divided into five general units where ground-water discharge from ET is considered to be significant. Based upon similarities in soil type, soil moisture, vegetation type, and vegetation density; the ET units are salt-encrusted playa (21,287 acres), bare-soil playa (75,922 acres), low-density vegetation (6,625 acres), moderate-density vegetation (5,019 acres), and high-density vegetation (1,522 acres). Annual ET was computed for ET units with micrometeorological data which were continuously measured at six instrumented sites. Total ET was determined at sites that were chosen for their soil- and vegetated-surface conditions, which include salt-encrusted playa (extensive salt encrustation) 0.17 feet per year, bare-soil playa (silt and salt encrustation) 0.21 feet per year, pickleweed (pickleweed plants, low-density vegetation) 0.60 feet per year, Eagle Borax (arrowweed plants and salt grass, moderate-density vegetation) 1.99 feet per year, Mesquite Flat (mesquite trees, high-density vegetation) 2.86 feet per year, and Mesquite Flat mixed grasses (mixed meadow grasses, high-density vegetation) 3.90 feet per year. Precipitation, flooding, and ground-water discharge satisfy ET demand in Death Valley. Ground-water discharge is estimated by deducting local precipitation and flooding from cumulative ET estimates. Discharge rates from ET units were not estimated directly because the range of vegetation units far exceeded the five specific vegetation units that were measured. The rate of annual ground-water discharge by ET for each ET unit was determined by fitting the annual ground-water ET for each site with the variability in vegetation density in each ET unit. The ET rate representing the midpoint of each ET unit was used as the representative value. The rate of annual ground-water ET for the playa sites did not require scaling in this manner. Annual ground-water discharge by ET was determined for all five ET units: salt-encrusted playa (0.13 foot), bare-soil playa (0.15 foot), low-density vegetation (1.0 foot), moderate-density vegetation (2.0 feet), and high-density vegetation (3.0 feet), and an area of vegetation or bare soil not contributing to ground-water discharge unclassified (0.0 foot). The total ground-water discharge from ET for the Death Valley floor is about 35,000 acre-feet and was computed by summing the products of the area of each ET unit multiplied by a corresponding ET rate for each unit.

Water-Resources Investigations Report↗
USGS2007

Availability of Ground-Water Data for Idaho, Water Year 2006

Introduction The Water Resources Division of the U.S. Geological Survey, in cooperation with Federal, State, and local water agencies, collects a large amount of data each year pertaining to the ground-water resources of Idaho. These data constitute a valuable database for developing an improved understanding of the water resources of the State. Beginning with the 1985 water year and continuing through 2005, data were published in a report series entitled, 'Water Resources Data for Idaho, Ground-Water Data.' Prior to the introduction of that series, historical ground-water information was published in U.S. Geological Survey Water-Supply Papers. In 2006, the ground-water data reporting requirement was discontinued. However, data continue to be available in our databases. This fact sheet serves as an index to ground-water data for 2006.

Fact Sheet↗
USGS1995

Areal distribution of selected trace elements, salinity, and major ions in shallow ground water, Tulare Basin, Southern San Joaquin Valley, California

The distribution of salinity and selected trace elements in shallow ground water in the Tulare Basin, California, was assessed to evaluate potential problems related to disposal in evaporation ponds of irrigation drain water containing elevated concentrations of selenium and other trace elements. The constituents of primary concern were selenium, arsenic, and salinity; uranium, boron, and molybdenum also were evaluated. Samples from 117 shallow wells were analyzed, and the results for samples from 110 of the wells were interpreted in relation to surficial geology, sediment depositional environment, soil characteristics, and hydrologic processes to determine the geochemical and hydrologic factors affecting the distribution of these constituents in ground water. In general, shallow ground water in areas where concentrations of salinity and most trace elements are elevated is influenced primarily by sediments derived from marine sedimentary rocks originating in the Coast Range, San Emigdio Mountains, and Tehachapi Mountains, and probably by unusual exposures of similar marine formations in the Sierra Nevada. Ground water in areas where concentrations of salinity and trace elements are significantly lower generally is influenced by igneous and metamorphic rocks exposed in the Sierra Nevada. In addition to sources of sediments, evaporation of shallow ground water, as indicated by isotopic enrichment of oxygen-18 and deuterium, increases salinity and concentrations of conservative trace elements such as selenium (under oxidizing conditions) and boron. Redox conditions affect the oxidation state of all trace elements of concern, except boron, and were found to be a major influence on trace-element solubility. Under oxidized conditions, selenate predominates and behaves conservatively, and arsenate predominates and is affected by sorption reactions that can limit arsenic solubility. Under reduced conditions, selenium is reduced to insoluble elemental selenium and arsenite predominates and generally is more soluble than arsenate. Elevated concentrations of uranium in shallow ground water probably are associated with uranium deposits in Kern County and other parts of the basin where oxidized conditions cause the more soluble uranyl species to predominate. Boron was correlated with salinity and behaved conservatively, whereas adsorption and precipitation of molybdenum minerals probably limited molybdenum solubility. Interrelations among constituents were examined with principal component analysis. The first two principal components explained 50.7 percent of the variance in the data. The first principal component was related to salinity, and the second principal component was related to redox conditions, reflecting two of the major influences on shallow groundwater quality found in this study.

California↗
USGS2005

Pushpoint sampling for defining spatial and temporal variations in contaminant concentrations in sediment pore water near the ground-water/surface-water interface

During four periods from April 2002 to June 2003, pore-water samples were taken from river sediment within a gaining reach (Mill Pond) of the Sudbury River in Ashland, Massachusetts, with a temporary pushpoint sampler to determine whether this device is an effective tool for measuring small-scale spatial variations in concentrations of volatile organic compounds and selected field parameters (specific conductance and dissolved oxygen concentration). The pore waters sampled were within a subsurface plume of volatile organic compounds extending from the nearby Nyanza Chemical Waste Dump Superfund site to the river. Samples were collected from depths of 10, 30, and 60 centimeters below the sediment surface along two 10-meter-long, parallel transects extending into the river. Twenty-five volatile organic compounds were detected at concentrations ranging from less than 1 microgram per liter to hundreds of micrograms per liter (for example, 1,2-dichlorobenzene, 490 micrograms per liter; cis-1,2-dichloroethene, 290 micrograms per liter). The most frequently detected compounds were either chlorobenzenes or chlorinated ethenes. Many of the compounds were detected only infrequently. Quality-control sampling indicated a low incidence of trace concentrations of contaminants. Additional samples collected with passive-water-diffusion-bag samplers yielded results comparable to those collected with the pushpoint sampler and to samples collected in previous studies at the site. The results demonstrate that the pushpoint sampler can yield distinct samples from sites in close proximity; in this case, sampling sites were 1 meter apart horizontally and 20 or 30 centimeters apart vertically. Moreover, the pushpoint sampler was able to draw pore water when inserted to depths as shallow as 10 centimeters below the sediment surface without entraining surface water. The simplicity of collecting numerous samples in a short time period (routinely, 20 to 30 per day) validates the use of a pushpoint sampler as a highly effective tool for mapping the extent of contaminated subsurface plumes, determining their constituents and loadings, and performing technical studies that may be relevant to bioremediation and other activities.

Massachusetts↗
USGS1985

Effects of climate, vegetation, and soils on consumptive water use and ground-water recharge to the Central Midwest Regional aquifer system, mid-continent United States

The Central Midwest aquifer system, in parts of Arkansas, Colorado, Kansas, Missouri, Nebraska, New Mexico, South Dakota, and Texas, is a region of great hydrologic diversity. This study examines the relationships between climate, vegetation, and soil that affect consumptive water use and recharge to the groundwater system. Computations of potential recharge and consumptive water use were restricted to those areas where the aquifers under consideration were the immediate underlying system. The principal method of analysis utilized a soil moisture computer model. This model requires four types of input: (1) hydrologic properties of the soils, (2) vegetation types, (3) monthly precipitation, and (4) computed monthly potential evapotranspiration (PET) values. The climatic factors that affect consumptive water use and recharge were extensively mapped for the study area. Nearly all the pertinent climatic elements confirmed the extreme diversity of the region. PET and those factors affecting it--solar radiation, temperature, and humidity--showed large regional differences; mean annual PET ranged from 36 to 70 inches in the study area. The seasonal climatic patterns indicate significant regional differences in those factors affecting seasonal consumptive water use and recharge. In the southern and western parts of the study area, consumptive water use occurred nearly the entire year; whereas, in northern parts it occurred primarily during the warm season (April through September). Results of the soil-moisture program, which added the effects of vegetation and the hydrologic characteristics of the soil to computed PET values, confirmed the significant regional differences in consumptive water use or actual evapotranspiration (AET) and potential groundwater recharge. Under two different vegetative conditions--the 1978 conditions and pre-agricultural conditions consisting of only grassland and woodland--overall differences in recharge were minimal. Mean annual recharge under both conditions averaged slightly more than 4.5 inches for the entire study area, but ranged from less than 0.10 inches in eastern Colorado to slightly more than 15 inches in Arkansas.

Arkansas, Colorado, Kansas, Missouri, Nebraska, Ne↗