Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Facies”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60Linked to original sources
USGS1984

Characterization and geochemistry of Devonian oil shale North Alabama - South Central Tennessee

Based on the physical and chemical data obtained to date, the Devonian oil shale rock of north Alabama and south-central Tennessee appears to offer an attractive potential for future resource development. The shale rock appears to have formed in a restrictive marine environment which provided opportunity for the accumulation of marine organic matter to form sufficient kerogen. The shale contains approximately 18% to 22% organic matter which is primarily kerogen. The kerogen has a relatively high H:C ratio indicative of an alginite and/or exinite source (Type 1 and Type II kerogen) and a high proportion of alkane and saturated ring hydrocarbons. However, a few samples have low H:C ratio values and are interpreted to have been formed in a shallow water oxidizing environment. Also, there is a possibility that these low H:C values may represent mixtures of terrestrial and marine organic material suggesting lateral facies changes of the rock from marine to near shore depositional environments. Trace metal values for both the whole rock and the shale oil fraction indicate a generally high V:Ni ratio, also indicative of a marine environment. Other trace metal values are in good agreement with data from other Devonian shales. Throughout the north Alabama and south-central Tennessee study area, the average oil yield from the shale is 13.9 gallon per ton. The highest oil yield values were obtained from the middle and upper parts of the shale sequence. Based on the crude oil composition diagram (11), the Alabama-Tennessee shale oil is classified as a aromatic-intermediate oil Estimated reserves of inplace shale oil resources in the principal study area, under less than 200 feet of overburden, exceeds 12.5 billion barrels.

Conference Paper↗
USGS1986

Paleontology and deposition of the Phosphoria Formation.

The Phosphoria Formation and related rocks were deposited in an interior sag basin developed in the Cordilleran miogeocline of western North America. Deposition can be characterized as a fringing bank complex on a carbonate ramp. Conodont-brachiopod biostratigraphy provides a sufficient relative time framework for correlation of the many units. These age correlations and the distribution of fossils, plus the biofacies of conodonts and brachiopods in particular, indicate that phosphate deposition was a cool-water, deeper ramp facies that transgressed over the carbonate bank twice, representing the Meade Peak and Retort Phosphatic Shale Members of the Phosphoria Formation. Conodont data that substantiate the above are presented, and a new genus and species, Sweetina triticum, is described. -Authors

Contributions to Geology - University of Wyoming, ↗
USGS1986

CHARACTERIZATION OF SANDSTONE RESERVOIRS FOR ENHANCED OIL RECOVERY: THE PERMIAN UPPER MINNELUSA FORMATION, POWDER RIVER BASIN, WYOMING.

Upper Minnelusa sandstones form a complex group of reservoirs because of variations in regional setting, sedimentology, and diagenetic alteration. Structural lineaments separate the reservoirs into northern and southern zones. Production in the north is from a single pay sand, and in the south from multi-pay sands due to differential erosion on top of the Upper Minnelusa. The intercalation of eolian dune, interdune, and sabkha sandstones with marine sandstones, carbonates, and anhydrites results in significant reservoir heterogeneity. Diagenetic alterations further enhance heterogeneity, because the degree of cementation and dissolution is partly facies-related.

Conference Paper↗
USGS1990

Patrick Draw field, Wyoming - 1 seismic expression of subtle strat trap in Upper Cretaceous Almond

The east flank of the Rock Springs uplift and the adjacent Wamsutter arch contain several large hydrocarbon accumulations. Among these accumulations are Patrick Draw field, which produces oil and gas from a stratigraphic trap in the Upper Cretaceous Almond formation, and Table Rock field, a faulted anticlinal trap that produces gas from multiple Tertiary, Mesozoic, and Paleozoic reservoirs. The principal petroleum reservoir in Patrick Draw field is a sandstone at the top of the Almond formation. This sandstone attains a maximum thickness of 35ft and piches out westward into relatively impervious silt-stone and shale that constitute the trapping facies. The objective of this investigation is to determine whether or not the stratigraphic trap at Patrick Draw can be detected on a 12 fold, common depth point seismic profile acquired by Forest Oil Corp. and its partners. The seismic line is 18.5 miles long and crosses Patrick Draw and Table Rock fields.

Wyoming↗
USGS1990

Characterization of carbon in sediment-hosted disseminated gold deposits, north central Nevada

The gray, dark gray and black colors of the sediments and the presence of pyrite in the Carlin, Jerritt Canyon, Horse Canyon, Betze, and Gold Acres sediment-hosted disseminated gold (SHDG) deposits indicate that these rocks are not oxidized with respect to carbon and iron sulfide. The organic matter in the host rocks of SHDG deposits in north-central Nevada is cryptocrystalline graphite with dimensions of 30 to 70 A (0.003 to 0.007 ??) that was formed at temperatures of 250 to 300??C. These results indicate that north-central Nevada was subjected to pumpellyite-actinolite to lowermost greenschist facies conditions prior to mineralization. The hydrothermal fluids that produced the gold deposits had little, if any, effect on the thermal maturity and crystallinity of the cryptocrystalline graphite produced by the earlier thermal event.

Conference Paper↗
USGS1994

Integrated geology and preliminary cross section along the north ramp of the Exploratory Studies Facility, Yucca Mountain

The Exploratory Studies Facility is a major part of the site characterization activities at Yucca Mountain, Nevada, and the north ramp is the first phase of construction. The N61W trending north ramp will transect the Bow Ridge and Drill Hole Wash faults and numerous minor faults, and traverses two thick welded tuffs and several nonwelded tuff units. A preliminary cross section along the north ramp was created by integration of geologic map relations, lithostratigraphic data from core collected from boreholes, and surface and borehole geophysical data. The Bow Ridge fault is a west-dipping normal fault with about 410 feet of dip-slip separation. East-dipping strata in the hanging wall adjacent to the fault is contrary to early structural interpretations. West of the Bow Ridge fault the ramp might traverse about 220??65 feet of nonlithified tuffaceous material. Geometry of the Drill Hole Wash fault is not known, but is modeled in part as two strands that juxtapose different thicknesses and facies of formations with a complex sense of movement.

Conference Paper↗
USGS1993

Development of 3-D lithostratigraphic and confidence models at Yucca Mountain, Nevada

Computerized three-dimensional geologic models of potential high-level nuclear waste repositories such as Yucca Moutain, Nevada, are important for visualizing the complex interplay of (1) thickness and facies variations in lithostratigraphic units and (2) the disruption of these units by faults. The concept of a 'model of confidence' in the lithostratigraphic model is introduced to show where data are located versus regions where interpolations are included. Models of confidence can be based on (1) expert judgment, (2) geostatistical analysis, or (3) a simplified combination of these two methods. Linking of lithostratigraphic models and models of confidence provide guidelines for future characterization and modeling activities, as well as for design and construction of the Exploratory Studies Facility.

Conference Paper↗
USGS1996

Remote mineralogic and lithologic mapping of the Ice River alkaline complex, British Columbia, Canada, using AVIRIS data

The Ice River Alkaline Complex is a late Paleozoic intrusion of mafic alkaline rocks, syenite, and carbonatite exposed in southeastern British Columbia, Canada. The complex intrudes Cambrian and Ordovician shales, slates, and limestones of the Chancellor and Ottertail Formations and the McKay Group. We examined the alkaline complex and adjacent country rocks using Airborne Visible-Infrared Imaging Spectrometer (AVIRIS) data. The data were first calibrated to relative reflectance and then used to spectrally map mineralogies in the study area by using a linear spectral unmixing program. This technique models each pixel spectrum in an AVIRIS image as a linear combination of unique endmember spectra. We selected endmember spectra from well-exposed and spectrally distinct mineralogic units, vegetation, and snow. Four of the endmembers reflect mineralogic variations within the McKay group in the study area, and may represent lateral and vertical variations of sedimentary or metamorphic facies. Otherwise, the resultant spatial distribution of endmembers shows generally close agreement with the published geologic map, although, in several places, our image-map is more accurate than the published map.

Photogrammetric Engineering and Remote Sensing↗
USGS1996

Mn-rich ilmenite from the Sullivan Pb-Zn-Ag deposit, British Columbia

Electron-microprobe analyses of 76 ilmenite grains from 13 locations in the footwall, hanging wall, and ore zone of the Sullivan Pb-Zn-Ag deposit, Kimberley, British Columbia, and from regionally developed tourmalinite of the Middle Proterozoic Aldridge Formation show two different modes that reflect two stages of formation. The first stage of ilmenite formation occurred as a result of greenschist-facies regional metamorphism, which also produced the associated Mn-rich garnet. Ilmenite from this stage forms inclusions within garnet and has a relatively low Mn content (<5.5 wt% MnO), owing to the preferential partitioning of Mn into the garnet. A second metamorphic or hydrothermal event resulted in the formation of ilmenite-bearing veinlets (+ chlorite + quartz + sulfides) that cut garnet and associated biotite. This latter type of ilmenite has a higher Mn content (up to 16.7 wt% MnO) that reflects remobilization of Mn within the local environment. Both types of Mn-rich ilmenite are considered to be derived from Mn originally concentrated in pools of dense brine that formed during synsedimentary, submarine-exhalative mineralization.

Canadian Mineralogist↗
USGS1998

Petrofacies Analysis - A Petrophysical Tool for Geologic/Engineering Reservoir Characterization

Petrofacies analysis is defined as the characterization and classification of pore types and fluid saturations as revealed by petrophysical measurements of a reservoir. The word "petrofacies" makes an explicit link between petroleum engineers' concerns with pore characteristics as arbiters of production performance and the facies paradigm of geologists as a methodology for genetic understanding and prediction. In petrofacies analysis, the porosity and resistivity axes of the classical Pickett plot are used to map water saturation, bulk volume water, and estimated permeability, as well as capillary pressure information where it is available. When data points are connected in order of depth within a reservoir, the characteristic patterns reflect reservoir rock character and its interplay with the hydrocarbon column. A third variable can be presented at each point on the crossplot by assigning a color scale that is based on other well logs, often gamma ray or photoelectric effect, or other derived variables. Contrasts between reservoir pore types and fluid saturations are reflected in changing patterns on the crossplot and can help discriminate and characterize reservoir heterogeneity. Many hundreds of analyses of well logs facilitated by spreadsheet and object-oriented programming have provided the means to distinguish patterns typical of certain complex pore types (size and connectedness) for sandstones and carbonate reservoirs, occurrences of irreducible water saturation, and presence of transition zones. The result has been an improved means to evaluate potential production, such as bypassed pay behind pipe and in old exploration wells, or to assess zonation and continuity of the reservoir. Petrofacies analysis in this study was applied to distinguishing flow units and including discriminating pore type as an assessment of reservoir conformance and continuity. The analysis is facilitated through the use of colorimage cross sections depicting depositional sequences, natural gamma ray, porosity, and permeability. Also, cluster analysis was applied to discriminate petrophysically similar reservoir rock.

AAPG Memoir↗
USGS1998

The ichnogenus Curvolithus revisited

The ichnogenus Curvolithus Fritsch, 1908, originally described from the Ordovician of the Prague Basin, typically comprises ribbonlike or tonguelike, flattened, endostratal traces with three rounded lobes on the upper surface. However, considerable confusion persists regarding the ichnotaxonomic status and diagnostic features of its ichnospecies. The type specimens of this ichnotaxon, overlooked in most subsequent reports, are redescribed herein. Curvolithus multiplex Fritsch, 1908, the type species, is retained for specimens with a trilobate upper surface and a quadralobate lower surface, in contrast to the criteria adopted by subsequent authors. The other ichnospecies originally proposed from the type locality, C. gregarius Fritsch, 1908, actually consists of a series of grouped parallel scratch marks forming ridges and should be removed from Curvolithus. Subsequently, four ichnospecies were defined: C.? davidis Webby 1970; C. annulatus Badve and Ghare 1978; C. aequus Walter et al. 1989; and C. manitouensis Maples and Suttner 1990. Curvolithus? davidis shows the typical trilobation of Curvolithus apparently in its lower surface, but the morphology of the upper surface is uncertain. Accordingly, it does not warrant ichnospecific assessment, and is regarded as a nomen dubium. The nature of the annulations on the trilobate upper surface of C. annulatus is unclear, and this ichnospecies is also best considered as a nomen dubium. Curvolithus aequus has a bilobate lower surface and probably represents washed out specimens of Didymaulichnus. Finally, C. manitouensis comprises specimens with a smooth, trilobate upper surface and a smooth, quadralobate lower surface, and is best regarded as a junior synonym of C. multiplex. Curvolithus multiplex has been used incorrectly for Curvolithus with a trilobate upper surface and a trilobate to unilobate lower surface. The new ichnospecies, Curvolithus simplex, is proposed herein for such traces. Curvolithus is interpreted as a locomotion trace (Repichnia) of endostratal carnivores, possibly gastropods, flatworms, or nemerteans. Curvolithus is a component of the Cruziana ichnofacies in shallow-marine facies, either of normal salinity or slightly brackish, in the latter case typically associated with fan deltas.

Journal of Paleontology↗
USGS2000

Stage boundary recognition in the Eastern Americas realm based on rugose corals

Most Devonian stages contain characteristic coral assemblages but these tend to be geographically and facies limited and may or may not be useful for recognising stage boundaries. Within eastern North America, corals contribute to the recognition of two boundaries: the base of the Lochkovian (Silurian-Devonian boundary) and the base of the Eifelian (Lower-Middle Devonian Series boundary).

CFS Courier Forschungsinstitut Senckenberg↗
USGS2003

The chrono- and lithostratigraphic significance of the type section of the Middendorf Formation, Chesterfield County, South Carolina

The name Middendorf Formation has been widely used in the Coastal Plain of South Carolina, eastern Georgia, and southern North Carolina since 1904, despite conflicting interpretations of the age and stratigraphic relations of the unit at its type locality. Between 1995 and 1998, the U.S. Geological Survey, in cooperation with the South Carolina Department of Natural Resources, drilled three continuously cored holes to the south and to the east of the type section of the Middendorf Formation, which is located in Chesterfield County, South Carolina. In addition, two outcrops to the northeast of the type section were sampled for biostratigraphic control. The litho- and biostratigraphic relations of the units in these cores and outcrops provide significant insights into the age of the Middendorf Formation at its type locality, and how this age impacts regional correlations of the formation. A projection of formational contacts and thicknesses from downdip areas into the type locality of the Middendorf Formation indicates that the type section is most likely a facies of either the uppermost Bladen Formation (of the Black Creek Group), or the uppermost Bladen and the lowermost part of the Peedee Formations. This report documents the evidence that support this interpretation. The implication of this interpretation is that the name "Middendorf" has been applied to a variety of units throughout the southeastern United States, all of which display a similar lithology, but differ significantly in stratigraphic position and age. For these reasons, we recommend that the name Middendorf be restricted for use with strata that occur only in the vicinity of the type locality, and use of the name "Middendorf" for units elsewhere in the Coastal Plain be reconsidered.

Southeastern Geology↗
USGS2004

Petrography and character of the bedrock surface beneath western Cape Cod, Massachusetts

Cores collected during recent drilling in western Cape Cod, Massachusetts provide insight into the topography and petrology of the underlying bedrock. 62 drill sites spread over a ???140 km2 study area produced cores of granitoids (31), orthogneisses (20), basalts/diabases (4), amphibolites (3), felsic mylonites (2), and dolomitic rock (2). Granitoid cores range in composition from granite to tonalite to quartz diorite, but are dominated by single-mica granites. Alteration is common in nearly all cores examined in this study, and is evidenced by the secondary growth of chlorite and epidote. The granitoids resemble rocks of the Dedham and Fall River terranes (Wones and Goldsmith 1991). Gneisses from the study area generally contain the mineral assemblage hornblende+plagioclase+quartz+biotite+epidote??chlorite?? sphene??K-feldspar??sericite+oxides. Based on mineral assemblages, we estimate peak metamorphic grade to be of lower amphibolite facies. X-ray powder diffraction of unmetamorphosed dolomitic cores shows presence of layered silicates (clays), plagioclase, and possible magnesite. Contours of the bedrock surface show locally irregular topography suggesting erosion by glacial scour. The distribution of lithologies suggests a possible continuation of the New Bedford gneissic terrane that outcrops 25 km to the west. Dolomitic rocks may represent a lithified fault gouge material at the eastern edge of the gneissic zone. Basalts/diabases are interpreted to be post-metamorphic dikes of Late Paleozoic age, or possibly associated with Mesozoic rifting.

Massachussets↗
USGS2004

Sequence stratigraphy of the Kingak Shale (Jurassic-Lower Cretaceous), National Petroleum Reserve in Alaska

Beaufortian strata (Jurassic-Lower Cretaceous) in the National Petroleum Reserve in Alaska (NPRA) are a focus of exploration since the 1994 discovery of the nearby Alpine oil field (>400 MMBO). These strata include the Kingak Shale, a succession of depositional sequences influenced by rift opening of the Arctic Ocean Basin. Interpretation of sequence stratigraphy and depositional facies from a regional two-dimensional seismic grid and well data allows the definition of four sequence sets that each displays unique stratal geometries and thickness trends across NPRA. A Lower to Middle Jurassic sequence set includes numerous transgressive-regressive sequences that collectively built a clastic shelf in north-central NPRA. Along the south-facing, lobate shelf margin, condensed shales in transgressive systems tracts downlap and coalesce into a basinal condensed section that is likely an important hydrocarbon source rock. An Oxfordian-Kimmeridgian sequence set, deposited during pulses of uplift on the Barrow arch, includes multiple transgressive-regressive sequences that locally contain well-winnowed, shoreface sandstones at the base of transgressive systems tracts. These shoreface sandstones and overlying shales, deposited during maximum flooding, form stratigraphic traps that are the main objective of exploration in the Alpine play in NPRA. A Valanginian sequence set includes at least two transgressive-regressive sequences that display relatively distal characteristics, suggesting high relative sea level. An important exception is the presence of a basal transgressive systems tract that locally contains shoreface sandstones of reservoir quality. A Hauterivian sequence set includes two transgressive-regressive sequences that constitute a shelf-margin wedge developed as the result of tectonic uplift along the Barrow arch during rift opening of the Arctic Ocean Basin. This sequence set displays stratal geometries suggesting incision and synsedimentary collapse of the shelf margin.

Alaska↗
USGS2008

Geology of the Carnegie museum dinosaur quarry site of Diplodocus carnegii, Sheep Creek, Wyoming

The holotype of Diplodocus carnegii Hatcher, 1901, consists of a partial skeleton (CM 84) that was recovered, along with a second partial skeleton of the same species (CM 94), from the upper 10 m of the Talking Rock facies of the Brushy Basin Member of the Morrison Formation exposed along Bone Quarry Draw, a tributary of Sheep Creek in Albany County, Wyoming. A composite measured section of the stratigraphic interval exposed adjacent to the quarry indicates that the Brushy Basin Member in this area is a stacked succession of lithofacies consisting of hackly, greenish gray, calcareous mudstone and greenish brown, dense, fine-grained limestone. The more erosion resistant limestone layers can be traced over many hundreds of meters. Thus, these strata do not appear to represent a highly localized deposit such as a stream channel, oxbow lake, or backwater pond. The Sheep Creek succession is interpreted as representing a clastic-dominated lake where high turbidity and sediment influx produced deposition of calcareous mudstone. During drier periods the lake's turbidity decreased and limestone and dolomite precipitation replaced mud deposition. Microkarsting at the top of some limestone/ dolomite layers suggests subaerial deposition may have prevailed during these dry episodes. The quarry of D. carnegii was excavated within the top strata of one of the numerous intervals of hackly, greenish gray, calcareous mudstone that represent an ephemeral freshwater lake. The quarry strata are directly overlain by 0.3 m of dolomite-capped limestone that was deposited shortly after interment of D. carnegii in the lake mudstones. The close vertical proximity of the overlying limestone to the skeleton's stratigraphic: level suggests that the animal's carcass may have been buried beneath the drying lake deposits during a period of decreased rainfall.

Annals of Carnegie Museum↗
USGS2011

Pore morphology effect in microlog for porosity prediction in a mature field

In an matured field, developed during the 1950s, no porosity logs were available from sources other than invaded zone resistivity Rxo . The microresistivity porosity is calibrated with the core porosity to yield an accurate estimate of the porosity. However, the procedure of calibrating the porosity with Rxo for a linear regression model may not be predictive without an understanding of the pore types in the reservoir interval. A thorough investigation of the pore types, based on the lithofacies description obtained from the core analysis, and its role in obtaining a good estimate of porosity is demonstrated in the Ogallah field. Therefore, the objective of this paper is to separate the porosity-microlog data into pore-type based zones with characteristic cementation exponents (m) in this multi-petrotype reservoir with a complex mixture of Arbuckle dolomite and sandstone rock. The value of m is critical in making estimates of water saturation. "Rule of thumb" values of cementation might lead to errors in water saturation on either the optimistic or the pessimistic side. The rock types in the Ogallah contain interparticle/intercrystalline, vugs and fractures distributed through the rock-facies, which influence the values of cementation factor. We use the modern typed well to shed light on the Archie's equation parameter values. Rock fabric numbers and flow zone indices have been identified for classification of dolomite and sandstone, respectively. The analysis brings out characteristic cementation factors for distinct pore types in the Arbuckle rock. The porosity predictions The analysis results also compliment the petrofacies delineation using LDA in this complicated rock layout as a quality control of the statistical application. The comparison between the predicted and core porosities shows a significant improvement over using a single m value for carbonates and sandstones which will lead to improved description of a matured field. Copyright 2011, Society of Petroleum Engineers.

Conference Paper↗
USGS2008

Hierarchy of sedimentary discontinuity surfaces and condensed beds from the middle Paleozoic of eastern North America: Implications for cratonic sequence stratigraphy

Sedimentological analyses of middle Paleozoic epeiric sea successions in North America suggest a hierarchy of discontinuity surfaces and condensed beds of increasing complexity. Simple firmgrounds and hardgrounds, which are comparatively ephemeral features, form the base of the hierarchy. Composite hardgrounds, reworked concretions, authigenic mineral crusts and monomictic intraformational conglomerates indicate more complex histories. Polymictic intraformational conglomerates, ironstones and phosphorites form the most complex discontinuity surfaces and condensed beds. Complexity of discontinuities is closely linked to depositional environments duration of sediment starvation and degree of reworking which in turn show a relationship to stratigraphic cyclicity. A model of cratonic sequence stratigraphy is generated by combining data on the complexity and lateral distribution of discontinuities in the context of facies successions. Lowstand, early transgressive and late transgressive systems tracts are representative of sea-level rise. Early and late transgressive systems tracts are separated by the maximum starvation surface (typically a polymictic intraformational conglomerate or condensed phosphorite), deposited during the peak rate of sea-level rise. Conversely the maximum flooding surface, representing the highest stand of sea level, is marked by little to no break in sedimentation. The highstand and falling stage systems tracts are deposited during relative sea-level fall. They are separated by the forced-regression surface, a thin discontinuity surface or condensed bed developed during the most rapid rate of sea-level fall. The lowest stand of sea level is marked by the sequence boundary. In subaerially exposed areas it is occasionally modified as a rockground or composite hardground.

Conference Paper↗