SEARCH · Geology Reports

Results for “Zeolites”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources

USGS1960

Core logs from five test holes near Kramer, California

In 1957, five test holes were drilled near Kramer, Calif., in the western Mojave Desert, for the U.S. Geological Survey. The drill sites are in topographic basins where gravimetric and geologic surveys indicated the presence, beneath alluvium, of a thick section of Quaternary and Tertiary sedimentary and volcanic rocks. Two holes, which were deeper tests at sites drilled in 1954, cored only silts, sands, and gravels: Four Corners test hole. 1 was drilled in sec. 20, T. 10 N., R. 6 W., to a depth of 3,500 feet. Four Corners test hole 2, in sec. 5, T. 10 N., R. 8 W., was drilled to 2,328 feet. Three holes which were drilled at new sites north of Kramer Junction, the intersection of U.S. Highways 395 and 466 and locally known as Four Corners, penetrated colemanite-bearing sediments. The location and total depth of these holes, are as follows: Four Corners test hole 3, sec. 18, T. 11 N., R. 6 W., depth 2,568. feet; Four Corners test hole 4, near the north edge of sec. 30, T. 11 N., R. 6 W., 1 depth 3,500 feet; Four Corners test hole 5, near the south edge of sec. 30, depth 1,604 feet. The sections of rocks penetrated in these 3 holes are similar. In each, the colemanite is in fine-grained sediments; these lie below sands and gravels, which are about 600 to 800 feet thick, and are underlain by sandstones and conglomerates. Colemanite is most abundant in the cores from Four Corners test hole 5, particularly in the 76 feet of core recovered between depths of 1,051 and 1,131 feet. Chemical analysis indicates that in this section of core the average content of BaOs is above 14 percent. In addition to colemanite, the cores contain sulfides of arsenic, an unusual iron sulfide, and zeolites. This mineral ,content of the colemanite-bearing sediments north of Kramer Junction (Four Corners), together with the general lithology of the lake beds and the occurrence of the sediments as a tilted section of beds below sands and gravels, supports correlation with the upper or marginal parts of the borate-bearing sediments at the Kramer borate mining district, which have similar features. There is, however, no evidence that any beds are exactly equivalent in age.

Bulletin↗

USGS1990

Mineral Resources of the Black Mountains North and Burns Spring Wilderness Study Areas, Mohave County, Arizona

At the request of the U.S. Bureau of Land Management, approximately 19,300 acres of the Black Mountains North Wilderness Study Area (AZ-020-009) and 23,310 acres of the Burns Spring Wilderness Study Area (AZ-02D-010) were evaluated for mineral resources and mineral resource potential. In this report, the area studied is referred to, collectively or individually, as the 'wilderness study area' or simply 'the study area'; any reference to the Black Mountains North or Burns Spring Wilderness Study Areas refers only to that part of the wilderness study area for which a mineral survey was requested by the U.S. Bureau of Land Management. The study area is located in western Arizona, about 30 mi northwest of Kingman. There are no identified resources in the study area. An area surrounding the Portland mine and including the southern part of the Black Mountains North Wilderness Study Area and the extreme northwestern part of the Burns Spring Wilderness Study Area has high resource potential for gold and moderate resource potential for silver, lead, and mercury. The area surrounding this and including much of the northern part of the Burns Spring Wilderness Study Area has moderate potential for gold, silver, and lead. The northeastern corner of the Black Mountains North Wilderness Study Area has moderate potential for gold and low potential for silver, copper, and molybdenum resources. The central part, including the narrow strip of land just west of the central part, of the Black Mountains North Wilderness Study Area and the southern and extreme eastern parts of the Burns Spring Wilderness Study Area have low resource potential for gold. The central and southern parts of the Black Mountains North Wilderness Study Area and all but the southwestern part of the Burns Spring Wilderness Study Area have moderate resource potential for perlite. Moderate resource potential for zeolites is assigned to a large area around the Portland mine that includes parts of both study areas, to a narrow strip of land just west of the central part of the Black Mountains North Wilderness Study Area, and to all but the southwest corner of the Burns Spring Wilderness Study Area. There is no potential for oil and gas in either study area. Sand and gravel are present in both study areas, but abundant quantities of these resources are available closer to existing markets.

Bulletin↗

USGS2003

Geoenvironmental Investigations of the Humboldt River Basin, Northern Nevada

Northern Nevada is one of the world's foremost regions of gold production. The Humboldt River Basin (HRB) covers 43,500 km2 in northern Nevada (Crompton, 1995), and it is home to approximately 18 active gold and silver mines (Driesner and Coyner, 2001) among at least 55 significant metallic mineral deposits (Long and others, 1998). Many of the gold mines are along the Carlin trend in the east-central portion of the HRB, and together they have produced 50 million ounces of gold from 1962 (when the Carlin mine first opened) through April 2002 (Nevada Mining Association, 2002). Mining is not new to the region, however. Beginning in 1849, mining has taken place in numerous districts that cover 39 percent of the land area in the HRB (Tingley, 1998). In addition to gold and silver, As, Ba, Cu, Fe, Hg, Li, Mn, Mo, Pb, S, Sb, V, W, Zn, and industrial commodities such as barite, limestone, fluorite, sand and gravel, gypsum, gemstones, pumice, zeolites, and building stone, have been extracted from the HRB (McFaul and others, 2000). All papers within this series of investigations can be found as lettered chapters of USGS Bulletin 2210, Geoenvironmental Investigations of the Humboldt River Basin, Northern Nevada. Each chapter is available separately online. The data and software utilized in this product (Chapter F) permit the user to view and analyze the geographic relationships among chemistry of stream sediments and surface waters, geology, and various cartographic base information such as but not limited to cities, county boundaries, and land ownership. Data for this product were compiled and or produced as part of a mineral and environmental assessment of the Humboldt River basin conducted by the U.S. Geological Survey between 1995 - 2000.

Bulletin↗

USGS1992

Mineral resource assessment of the Dillon 1° x 2° quadrangle, Idaho and Montana

The Dillon 1 ° x2° quadrangle in southwestern Montana and east-central Idaho was investigated as part of the U.S. Geological Survey's Conterminous United States Mineral Assessment Program (CUSMAP) to determine its mineral resource potential. An interdisciplinary study was made of geology, geochemistry, geophysics (gravity and aeromagnetics), remote sensing, and mineral deposits. The results of those studies, as well as mineral resource assessment of numerous mineraldeposit types, are published separately as a folio of maps. This report summarizes the studies, provides background information on them, and presents a selected bibliography relevant to the geology and mineral resources of the quadrangle. The quadrangle contains large resources of gold and substantial resources of talc and chlorite, all of which were being mined in the 1980's and early 1990's. Submarginal resources of molybdenum, copper, tungsten, and iron range from moderately large to large. Other commodities that may be present in significant amounts are chromite, lead, zinc, silver, barite, zeolite minerals, and various nonmetallic metamorphic minerals.

Idaho, Montana↗

USGS1984

Geologic and hydrologic characterization and evaluation of the Basin and Range Province relative to the disposal of high-level radioactive waste: Part I, Introduction and guidelines

The U.S. Geological Survey's program for geologic and hydrologic evaluation of physiographic provinces to identify areas potentially suitable for locating repository sites for disposal of high-level nuclear wastes was announced to the Governors of the eight States in the Basin and Range Province on May 5, 1981. Representatives of Arizona, California, Idaho, New Mexico, Nevada, Oregon, Texas, and Utah, were invited to cooperate with the Federal Government in the evaluation process. Each Governor was requested to nominate an Earth scientist to represent the State in a province working group composed of State and U.S. Geological Survey representatives. This report, Part I of a three-part report, provides the background, introduction and scope of the study. This part also includes a discussion of geologic and hydrologic guidelines that will be used in the evaluation process and illustrates geohydrologic environments and the effect of individual factors in providing multiple natural barriers to radionuclide migration. Part II is a reconnaissance characterization of the geologic and hydrologic factors to be used in the initial screening of the Basin and Range Province. Part III will be the initial evaluation of the Province and will identify regions that appear suitable for further study. The plan for study of the Province includes a stepwise screening process by which successively smaller land units are considered in increasing detail. Each step involves characterization of the geology and hydrology and selection of subunits for more intensive characterization. Selection of subunits for further study is by evaluation of geologic and hydrologic conditions following a set of guidelines. By representation on the Province Working Group, the States participate in a consultation and review role in: (1) Establishing geologic and hydrologic guidelines, and (2) characterizing and evaluating the Province. The States also participate in compilation of geologic and hydrologic data used in characterizing the Province. The current (1983) needs for a high-level radioactive waste repository include: (1) Disposal in a mined repository; (2) retrievability of the waste for as much as 50 years; and (3) confidence of isolation of the waste from the accessible environment. Isolation of the waste needs to be assured using geologic and hydrologic conditions that: (1) Minimize risk of inadvertent future intrusions by man; (2) minimize the possibility of disturbance by processes that would expose the waste or increase its mobility; and (3) provide a system of natural barriers to the migration of waste by ground water. The guidelines adopted by the Province Working Group are designed to provide a standard with which these conditions can be compared. The guidelines can be grouped into four principal categories: (1) Potential host media, (2) ground-water conditions, (3) tectonic conditions, and. (4) occurrence of natural resources. Ideally the host medium constitutes the first natural barrier to migration of radionculides. The host medium ideally should be a rock type that prevents or retards dissolution and transport of radionuclides. Rocks in both the saturated and unsaturated zones may have desirable characteristics for host media. Rocks-other than the host-in the ground-water flow path from the repository ideally should be major barriers to radionuclide migration. Confining beds of low permeability might be present to retard the rate of flow between more permeable beds. Additionally, sorption of radionuclides by materials such as clays and zeolites in the flow path can further retard the flow of radionuclides by several orders of magnitude. Tectonic conditions in an area should not present a probable cause for exhumation or increased mobility of radioactive waste. Natural resources are a factor for consideration because of the problem of future human intrusion and exposure to radioactivity in the quest for minerals, oil, gas, water, and geothermal resources. The ultimate evaluation of the suitability of a geohydrologic environment for developing a mined repository needs to assess all geologic and hydrologic characteristics and their interaction in providing confidence that a geohydrologic environment will effectively isolate radionuclides from human access. Several hypothetical settings with typical geohydrologic conditions in the Basin and Range Province are used to illustrate the effect of multiple barriers in the isolation of radionuclides.

Arizona, California, Idaho, Nevada, New Mexico, Or↗

USGS1987

Summary mineral resource appraisal of the Richfield 1° x 2° quadrangle, west-central Utah

The mineral resource potential of the Richfield 1° x 2° quadrangle, Utah, has been appraised using geological, geophysical, geochemical, and remote-sensing techniques. These studies have led to many publications giving basic data and interpretations; of these, a series of 18 maps at 1:250,000 and 1:500,000 scales summarizing aspects of the geology, geophysics, geochemistry, and remote sensing is designated the CUSMAP (Conterminous United States Mineral Appraisal Program) folio. This circular uses the data shown on these maps to appraise the mineral resource potential of the quadrangle. The oldest rocks exposed in the Richfield quadrangle are small patches of Early Proterozoic (1.7 billion years old) gneiss and schist on the west side of the Mineral Mountains. These rocks presumably formed the basement on which many thousands of meters of Late Proterozoic, Paleozoic, and lower Mesozoic sedimentary strata were deposited. These rocks were deformed during the Late Cretaceous Sevier orogeny when Precambrian and Paleozoic strata in the western part of the quadrangle were thrust relatively eastward across Paleozoic and Mesozoic strata in the eastern part of the quadrangle. Late Cretaceous and early Tertiary highlands above the overthrust belt were eroded and much of the debris was deposited in broad basins east of the belt. Volcanism in Oligocene and earliest Miocene time formed an east-northeast-trending belt of calcalkalic volcanoes across the southern half of the quadrangle. In early Miocene time, the composition of the volcanic rocks changed to a bimodal assemblage of mafic rocks and high-silica alkali rhyolite that has been erupted episodically ever since. Syngenetic mineral resources developed during formation of both sedimentary and volcanic rocks. These include limestone and dolomite, silica-rich sandstone, metalliferous black shale, evaporite deposits, zeolite deposits, pumice, cinders and scoria, and evaporitic or diagenetic deposits in playa environments. Most of these deposits need to have markets established, or extraction and fabrication techniques developed, for them to be utilized. Most epigenetic deposits are of volcanogenic-hydrothermal origin. Deposits associated with calc-alkalic igneous activity largely contain Cu, Pb, Zn, Au, and Ag, and occur in a variety of types zoned around core intrusions. Younger deposits are mostly associated with silicic igneous centers belonging to the bimodal mafic-silicic igneous association. Resources associated with this latter group are likely to contain one or more of the elements Mo, W, U, Sn, Be, and F, as well as Pb, Zn, Au, and Ag. Alunite and kaolinite deposits are found at many mineralized centers. Most epigenetically mineralized areas expose only the upper, near-surface parts of the different hydrothermal systems; most of whatever mineral deposits formed in these systems probably still exist at depth, awaiting discovery. Our conclusion is that many mineralized areas have excellent possibilities for the occurrence of mineral resources. Each of the many identified centers of mineralization is discussed briefly in this report and an estimate made of its resource potential.

Utah↗

USGS2014

Lithium: for harnessing renewable energy

Lithium, which has the chemical symbol Li and an atomic number of 3, is the first metal in the periodic table. Lithium has many uses, the most prominent being in batteries for cell phones, laptops, and electric and hybrid vehicles. Worldwide sources of lithium are broken down by ore-deposit type as follows: closed-basin brines, 58%; pegmatites and related granites, 26%; lithium-enriched clays, 7%; oilfield brines, 3%; geothermal brines, 3%; and lithium-enriched zeolites, 3% (2013 statistics). There are over 39 million tons of lithium resources worldwide. Of this resource, the USGS estimates there to be approximately 13 million tons of current economically recoverable lithium reserves. To help predict where future lithium supplies might be located, USGS scientists study how and where identified resources are concentrated in the Earth’s crust, and they use that knowledge to assess the likelihood that undiscovered resources also exist.

Fact Sheet↗

USGS2011

Mineral Commodity Summaries 2011

Each chapter of the 2011 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production and resources. The MCS is the earliest comprehensive source of 2010 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses. For mineral commodities for which there is a Government stockpile, detailed information concerning the stockpile status is included in the two-page synopsis. Mineral Commodity Summaries 2011 contains new chapters on iron oxide pigments, wollastonite, and zeolites. The chapters on mica (natural), scrap and flake and mica (natural), sheet have been combined into a single chapter - mica (natural). Abbreviations and units of measure, and definitions of selected terms used in the report, are in Appendix A and Appendix B, respectively. "Appendix C - Reserves and Resources" has been divided into "Part A - Resource/Reserve Classification for Minerals" and "Part B - Sources of Reserves Data," including some information that was previously in this introduction. A directory of USGS minerals information country specialists and their responsibilities is Appendix D. The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the MCS 2011 are welcomed.

Mineral Commodity Summaries↗

USGS2007

The "Golden Shale": An indicator of coastal stability for Marble Point, McMurdo Sound, over the last four million years

A small sedimentary deposit near Gneiss Point on the western side of McMurdo Sound, previously identified as shale, is described. The deposit is phillipsite, a zeolite that is believed to have formed from the deposition and alteration of volcanic ash in a small ice-marginal saline lake. Other previously recorded occurrences of phillipsite in the dry valleys are believed to be several million years old. A similar age for this deposit is suggested for the Gneiss Point deposit. This is consistent with other weathering and landscape features found in the immediate area, including traces of halloysite in soils. The deposit is very close to sea level but could not have formed if the site had been below sea level, indicating that there has been very little uplift following that which caused the sea to retreat from the Wright Fiord.

Open-File Report↗

USGS2007

Characteristics of Fault Zones in Volcanic Rocks Near Yucca Flat, Nevada Test Site, Nevada

During 2005 and 2006, the USGS conducted geological studies of fault zones at surface outcrops at the Nevada Test Site. The objectives of these studies were to characterize fault geometry, identify the presence of fault splays, and understand the width and internal architecture of fault zones. Geologic investigations were conducted at surface exposures in upland areas adjacent to Yucca Flat, a basin in the northeastern part of the Nevada Test Site; these data serve as control points for the interpretation of the subsurface data collected at Yucca Flat by other USGS scientists. Fault zones in volcanic rocks near Yucca Flat differ in character and width as a result of differences in the degree of welding and alteration of the protolith, and amount of fault offset. Fault-related damage zones tend to scale with fault offset; damage zones associated with large-offset faults (>100 m) are many tens of meters wide, whereas damage zones associated with smaller-offset faults are generally a only a meter or two wide. Zeolitically-altered tuff develops moderate-sized damage zones whereas vitric nonwelded, bedded and airfall tuff have very minor damage zones, often consisting of the fault zone itself as a deformation band, with minor fault effect to the surrounding rock mass. These differences in fault geometry and fault zone architecture in surface analog sites can serve as a guide toward interpretation of high-resolution subsurface geophysical results from Yucca Flat.

Open-File Report↗

USGS2010

Chemical and morphological comparison of erionite from Oregon, North Dakota, and Turkey

Erionite, a fibrous zeolite, occurs in pediment gravel deposits near Killdeer Mountain, North Dakota. Material from these pediment deposits has been excavated for use as roadbed throughout Dunn County, North Dakota. Erionite also occurs in the Cappadocian region of Turkey, where a link between malignant mesothelioma and inhalation of this mineral has been established. The U.S. Environmental Protection Agency (EPA), Region 8, requested that the U.S. Geological Survey (USGS) compare the chemistry and morphology of erionite collected from the Killdeer Mountains to those collected from villages in Turkey and from Rome, Oregon, which has also been linked to disease in animal studies.

Open-File Report↗

USGS2014

Stochastic modeling of a lava-flow aquifer system

This report describes preliminary three-dimensional geostatistical modeling of a lava-flow aquifer system using a multiple-point geostatistical model. The purpose of this study is to provide a proof-of-concept for this modeling approach. An example of the method is demonstrated using a subset of borehole geologic data and aquifer test data from a portion of the Calico Hills Formation, a lava-flow aquifer system that partially underlies Pahute Mesa, Nevada. Groundwater movement in this aquifer system is assumed to be controlled by the spatial distribution of two geologic units—rhyolite lava flows and zeolitized tuffs. The configuration of subsurface lava flows and tuffs is largely unknown because of limited data. The spatial configuration of the lava flows and tuffs is modeled by using a multiple-point geostatistical simulation algorithm that generates a large number of alternative realizations, each honoring the available geologic data and drawn from a geologic conceptual model of the lava-flow aquifer system as represented by a training image. In order to demonstrate how results from the geostatistical model could be analyzed in terms of available hydrologic data, a numerical simulation of part of an aquifer test was applied to the realizations of the geostatistical model.

Nevada↗

USGS1958

Core logs from five holes near Kramer, in the Mojave Desert, California

In 1957, five test holes were drilled near Kramer, California, in =he western Mojave Desert. The drill sites are in topographic basins where gravimetric and geologic surveys indicated the presence, beneath alluvium, of a thick section of Quaternary and Tertiary sedimentary and volcanic rocks. Two holes which were deeper tests at sites drilled in 1954 cored only silts, sands and gravels: Four Corners test hole No. 1 was drilled in sec. 20, T. I0 N., R. 6 W., to a depth of 3,500 feet. Four Corners No. 2, in sec. 5, T. I0 N., R. 8 W., was drilled to 2,328 feet. Three holes which were drilled at new sites north of the intersection of U. S. Highways 395 and 466, locally known as Four Corners, encountered colemanite-bearing sediments. The locations and total depths of these holes are as follows: Four Corners No. 3, sec. T. 11 N., R. 6 W., depth 2,568 feet; Four Corners No. 4, near northern edge of sec. 30, T. ll N., R. 6 W., depth 3,500 feet; Four Corners No. 5, near southern edge of sec. 30, depth 1,604 feet. The sections of rocks encountered in these three holes are similar. In each, the colemanite is in fine-grained sediments that lie below sands and gravels, which are about 600 to 800 feet thick, and are underlain by sandstones and conglomerates. Colemanite is most abundant in the cores from Four Corners to hole No. 5, particularly in the 76 feet of core recovered between depths of 1,051 and 1,131 feet. Chemical analysis shows that in this section of core the average content of B203 is above 14 percent. In addition to colemanite, the cores contain sulfides of arsenic, an unusual iron sulfide, and zeolites. This mineralogy of the colemanite-bearing sediments north of Four Corners, together with the general lake bed lithology and the occurrence as a tilted section of beds below sands and gravels, supports correlation with the upper or marginal parts of the borate-bearin8 sediments at the Kramer borate mining district, which have similar features. There is, however, no evidence that any beds are exactly equivalent in age.

Open-File Report↗

USGS1962

Interim geological investigations in the U12e.04 tunnel, Nevada Test Site, Nye County, Nevada

The Ul2e.04 tunnel is a part of the Ul2e tunnel system, which has been driven southwestward beneath Rainier Mesa in the northern part of the Nevada Test Site. The Ul2e.04 tunnel was driven about S. 15? W. in zeolitic tuff of subunits E and F of Tunnel Bed W near the top of the lower member of the Indian Trail Formation (upper Miocene or lower Pliocene). Dolomite of Paleozoic age lies about 915 feet below the end of the tunnel; vertical cover over the end of the tunnel to the surface of Rainier Mesa is about 1,390 feet. The tuffs in the tunnel strike almost north-south and dip to the west. There are several normal northwest-trending faults with vertical to steep dips and small displacements. The predominant joint set strikes northwest and dips mostly vertically or steeply to the northeast. Petrographically and chemically the tuffs in the U12e.04 tunnel are similar to other tuffs of the Indian Trail Formation from the Nevada Test Site, The tuffs in the tunnel have an average porosity of 38.6 percent, dry bulk density of 1.46 g/cc (grams per cubic centimeter), grain density of 2.38 g/cc, water content of 20.7 percent by weight. Shore hardness of 25.1, and unconfined compressive strength of 4,400 psi (pounds per square inch). Separately, the tuffs from the chamber at the end of the tunnel have an average porosity of 36.8 percent, dry bulk density of 1.51 g/cc, grain density of 2.38 g/cc, water content of 20.0 percent by weight, Shore hardness of 27.2 and unconfined compressive strength of 4,500 psi. An NX-size cored hole was drilled from the surface of Rainier Mesa into the Ul2e.04 chamber.

Open-File Report↗

USGS1964

Chemistry and movement of ground water, Nevada Test Site

Three chemical types of ground water are distinguished at the Nevada Test Site and vicinity. A sodium-potassium water is related to tuff (in part zeolitized) and to alluvium containing detrital tuff. A calcium-magnesium water is related to limestone and dolomite, or to alluvium containing detritus of these rock types. A mixed chemical type, containing about as much sodium and potassium as calcium and magnesium, may result from the addition of one of the first two types of water to the other; to passage of water first through tuff and then through carbonate rock, or vice versa; and to ion-exchange during water travel. Consideration of the distribution of these water types, together with the distribution of sodium in the water and progressive changes in the dissolved solids, suggests that the ground water in the Nevada Test Site probably moves toward the Amargosa Desert, not into Indian Spring Valley and thence southeastward toward Las Vegas. The low dissolved solids content of ground-water reservoirs in alluvium and tuff of the enclosed basins indicates that recharge is local in origin.

Open-File Report↗

USGS1973

An X-ray and optical study of cuttings from the U. S. Bureau of Reclamation Mesa 6-1 drillhole, Imperial County, California

The Mesa 6-1 drillhole penetrates 8,031 feet of sediments. Cuttings are chiefly siltstones, but with varying amounts of sandstones ranging from very fine sand to very coarse sand size. Color changes in the siltstones constitute the only systematic changes of lithology with depth; these are considered to be the result of variations in oxidation-reduction conditions, not the result of depositional factors. Fragments of igneous and metamorphic rocks occur sporadically in trace amounts. A pebble horizon at least 30 feet thick but of questionable lateral extent is the only distinctive sedimentary horizon. Montmorillonite was found in siltstone fragments at and above 1,450 feet, but not in siltstone fragments at or below 1,690 feet. Quartz, calcite, microcline, albite, chlorite, and illite are present in whole-rock diffractograms throughout the hole. Dolomite occurs in most samples to a depth of 4,910 feet, and is present intermittently to a depth of 7,697 feet. Pyrite is present intermittently. No zeolites were found. Black, dominantly amorphous grains of native sulfur, which may easily be confused with asphalt, are abundant at one horizon.

California↗

USGS1976

Textural and mineralogical study of sandstones from the onshore Gulf of Alaska Tertiary Province, southern Alaska

Petrographic examination of 74 outcrop samples of Paleocene through Pliocene age from the onshore Gulf of Alaska Tertiary Province indicates that sandstones of the province characteristically are texturally immature and mineralogically unstable. Diagenetic alteration of framework grains throughout the stratigraphic sequence has produced widespread zeolite cement or phyllosilicate grain coatings and pseudomatrix. Multiple deformation and deep burial of the older Tertiary sequence--the Orca Group, the shale of Haydon Peak, and the Kulthieth and Tokun Formations--caused extensive alteration and grain interpenetration, resulting in low porosity values. Less intense deformation and intermediate depth of burial of the younger Tertiary sequence--the Katalla, Poul Creek, Redwood, and Yakataga Formations--has resulted in a greater range in textural properties. Most sandstone samples in the younger Tertiary sequence are poorly sorted, tightly packed, and have strongly appressed framework grains, but some are less tightly packed and contain less matrix. Soft and mineralogically unstable framework grains have undergone considerable alteration, reducing pore space even in the youngest rocks. Measurements of porosity, permeability, grain density, and sonic velocity of outcrop samples of the younger Tertiary sequence indicate a modest up-section improvement in sandstone reservoir characteristics. Nonetheless porosity and permeability values typically are below 16 percent and 15 millidarcies respectively and grain densities are consistently high, about 2.7 gm/cc. Low permeability and porosity values, and high grain densities and sonic velocities appear to be typical of most outcrop areas throughout the onshore Gulf of Alaska Tertiary Province.

Open-File Report↗

USGS1976

A study of the mineralogy and lithology of cuttings from the U.S. Bureau of Reclamation MESA 6-2 Drillhole, Imperial County, California, including comparisons with MESA 6-1 Drillhole

The Mesa 6-2 drillhole penetrates 6,000 feet of sediments in Imperial County, California. The cuttings material from the upper part of the drillhole is chiefly unconsolidated mud and silt. Soft siltstone fragments occur at about 1,400 feet and increase in amount down to 2,400 feet. Some pebbles are found above 2,400 feet, but the pebble-rich horizons are less distinctive than the pebble zone in the Mesa 6-1 drillhole. Below 2,400 feet, cuttings ape composed of about two-thirds siltstone and one-third sandstones, ranging from very fine to very coarse sand, plus loose Sand grains. Although below 2,400 feet there is no systematic change in color of siltstones, grain size, or cementation with depth, horizons composed predominantly of loose sand are more common at deeper levels. Fragments of igneous and metamorphic rocks are less common than in the Mesa 6-1 drillhole. Quartz, calcite, K-feldspar, plagioclase (albite), illite, and mixed layer clays are identified by X-ray diffractograms of whole-rock samples throughout the hole. Chlorite occurs in all samples from below 2,100 feet, and probably also occurs at shallower depths. In most siltstones, montmorillonite occurs only down to the interval 2,200-2,300 feet, but in the buff siltstone it is found to the bottom of the drillhole. Kaolinite occurs at least down to 4,700 feet. Dolomite is found down to at least 5,970 feet, but is generally absent from horizons composed mostly of loose sand. Pyrite occurs in many samples. No zeolites, ankerite, or amorphous sulfur were detected. Theme is no horizon that may be used fop conclusive correlation with the Mesa 6-1 drillhole.

Open-File Report↗