Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “White Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources
USGS2010

Use of time series and harmonic constituents of tidal propagation to enhance estimation of coastal aquifer heterogeneity

A synthetic two‐dimensional model of a horizontally and vertically heterogeneous confined coastal aquifer system, based on the Upper Floridan aquifer in south Florida, USA, subjected to constant recharge and a complex tidal signal was used to generate 15‐minute water‐level data at select locations over a 7‐day simulation period. “Observed” water‐level data were generated by adding noise, representative of typical barometric pressure variations and measurement errors, to 15‐minute data from the synthetic model. Permeability was calibrated using a non‐linear gradient‐based parameter inversion approach with preferred‐value Tikhonov regularization and 1) “observed” water‐level data, 2) harmonic constituent data, or 3) a combination of “observed” water‐level and harmonic constituent data. In all cases, high‐frequency data used in the parameter inversion process were able to characterize broad‐scale heterogeneities; the ability to discern fine‐scale heterogeneity was greater when harmonic constituent data were used. These results suggest that the combined use of highly parameterized‐inversion techniques and high frequency time and/or processed‐harmonic constituent water‐level data could be a useful approach to better characterize aquifer heterogeneities in coastal aquifers influenced by ocean tides.

Conference Paper↗
USGS2022

Utilization of genetic data to inform native Brook Trout conservation in North Carolina

As North Carolina’s only native salmonid, Brook Trout Salvelinus fontinalis is a fish of considerable ecological and cultural significance in the state, but anthropogenic alterations to the landscape and introductions of nonnative salmonids have fragmented and reduced its native range. As a result, the North Carolina Wildlife Resources Commission (NCWRC) has enacted numerous efforts to help conserve the species. Annual demographic surveys of self-sustaining Brook Trout populations have been on-going since 1978, which have also included successful efforts to document previously unidentified populations. Beginning in earnest during the 1990s, allozyme testing was used to assess patterns of hatchery introgression, with over 480 collections genotyped at the creatine kinase locus. In 2010, the NCWRC began using microsatellite markers to conduct an extensive survey of Brook Trout genetic diversity and variation. To date, 541 Brook Trout collections representing 11,090 individuals have been genotyped at 12 microsatellite loci. These data have provided insights into evolutionary relationships among populations, spatial patterns of genetic diversity, and the extent of hatchery introgression within populations. Ultimately, increased understanding of genetic diversity and relatedness have been informative for determining that Brook Trout management in North Carolina is likely best enacted at the level of individual populations. Moreover, we have used these data to actively guide stream restoration and population reintroduction activities. Over the last 15 years, NCWRC and its partners have used genetic data to prioritize habitat enhancement activities and guide 17 Brook Trout population reintroduction projects. In the future, we plan to continue expanding the microsatellite genetic baseline while also exploring the utility of phylogenomic analyses to inform Brook Trout conservation activities. Genetic and genomic approaches have great potential to improve the efficacy of conservation actions for Brook Trout in North Carolina and throughout its native range.

North Carolina↗
USGS1983

Faulting of rocks in three-dimensional strain fields I. Failure of rocks in polyaxial, servo-control experiments

The dependence of the number of sets of faults and their orientation on the intermediate strain axis is investigated through polyaxial tests, reported here, and theoretical analysis, reported in an accompanying paper. In the experiments, cubic samples of Berea sandstone, Sierra-White and Westerly granites, and Candoro and Solnhofen limestones were loaded on their three pairs of faces by three independent, mutually perpendicular presses at room temperature. Two of the presses were servo-controlled and applied constant displacement rates throughout the experiment. Most samples display three or four sets of faults in orthorhombic symmetry. These faults form in several yielding events that follow a stage of elastic deformation. In many experiments, the maximum and the intermediate compressive stresses interchange orientations during the yielding events, where the corresponding strains are constant. The final stage of most experiments is characterized by slip along the faults.

Tectonophysics↗
USGS2024

Stratigraphy, paleoflora, and tectonic setting of the Paleogene Sheep Creek volcanic field, central Alaska

In this paper, we provide new information on the stratigraphy and paleoflora of the Sheep Creek volcanic field in the Alaska Range that bolsters our understanding of a key interval in the tectonic, paleoclimate, and paleoenvironmental history of the northern Cordillera. Although the distribution and basic stratigraphy of these rocks have been previously reported, here we document the stratigraphic context of recently dated igneous rocks and paleosols ranging from the Paleocene–Eocene boundary to the early middle Eocene, describe a more complete fossil leaf flora from the succession, and place the Sheep Creek volcanic field in its regional tectonic context of ridge subduction and slab window migration in central Alaska.

Alaska↗
USGS1972

Surficial geology of the Mount Tom quadrangle, Massachusetts

Movement of the last ice sheet in the Mount Tom quadrangle was due south during time of major advance as indicated by striations, drumlins, and indicator stones. Erratics of the Belchertown Tonalite, derived from the northeast portion of the Easthampton quadrangle, have been carried southward a distance of at least 16 miles. The presence of tonalite boulders on the summit of Mount Tom, elevation 1,205 feet, testifies to uplift of erratics through a vertical distance of 1,000 feet. Three tills are recognized on the basis of color, grainsize parameters, and location: (1) a reddish-brown sandy till occurs west of the Holyoke Basalt ridge, (2) a brown silty till lies east of the basalt ridge, and (3) a grayish-brown till-with intermediate grain size occurs in the Easthampton quadrangle and the north-central portion of the Mount Tom quadrangle. The three tills are the same age and are equivalent to the upper till of southern New England. During deglaciation, readvance occurred from the northeast over a minimum distance of 3.5 miles in the southeast portion of the quadrangle. Evidence for readvance consists of (1) till over stratified drift, (2) southwest-oriented till fabrics on south-trending drumlins, (3) west-southwest-trending striations cutting south-trending striations, (4) southwest-oriented glaciotectonic structures, and (5) data from borings. West of the basalt ridge, northward retreat of an active ice margin was punctuated by four stillstands, during which outwash deltas were deposited in proglacial lakes. From oldest to youngest the deposits associated with the four stillstands are named: (1) Paper Mills delta, (2) Barnes delta, (3) Pomeroy Street delta, and (4) White Brook delta. East of the basalt ridge a series of small ice-contact deltas were deposited in high proglacial Lake Hitchcock, which expanded northward with the retreating ice margin. Deposition culminated along the upper east margin of the quadrangle with the formation of a large ice-contact delta named the Holyoke delta. Continued northward retreat of the ice margin both east and west of the basalt ridge permitted water of Lake Hitchcock to extend through the Holyoke Narrows and into the valleys of the Manhan River and Broad Brook in the north-central portion of the Mount Tom quadrangle. Drainage of Lake Hitchcock 10,700 years ago (Flint, 1956) initiated rapid downcutting by streams, as shown by numerous stream terraces along the Connecticut, Westfield, and Manhan Rivers, and along lesser tributaries.

Open-File Report↗
USGS1944

Exploratory water-well drilling in the Houston District, Texas

In the spring and summer of 1939 a program of exploratory drilling wad undertaken in the Houston district, Tx., in conjunction with a general initiation of the water resources of the district. The main purposes of the program were to determine the thickness and character of water-bearing sands down to a maximum depth of 2,000 feet, the chemical character of the water at different depths, and the artesian pressure and to provide additional observation wells for studying fluctuations in artesian pressure and possibilities of intrusion of salt water from the direction of the Gulf. Thirteen deep test wells, 5? inches in diameter and ranging in depth from 360 to 2,000 feet, were put down with a hydraulic rotary drill by the city of Houston. The combined drilling footage of all of the wells amounted to 17,460 feet, and their averse depth was 1,246 feet. All were electrically logged. Samples of cuttings were collected from the drilling mud after every 20 feet of drilling. In 6 of the wells sand samples were obtained by core drilling in beds at selected horizons, about 230 feet being recovered. A total of 15 samples of sand and water were obtained in 8 wells by the drill-stem method. Side-wall sampling was attempted. Six of the test holes were cased with 3? casing (inside diameter) and equipped with screens so that water-level measurements could be made and samples of water collected for chemical analyses , Selected sand samples were analyzed and tested in a field laboratory for mechanical composition, permeability, and porosity. The field and laboratory data were studied with special reference to the significance of the electrical logs. A comparison of the electrical logs of the test wells with the driller's logs shows that, on the whole, they agree remarkably well in fixing the upper and lower limits of the thicker beds of sand and clay, but that the agreement is not so close where the beds are thin. Variable results were obtained from attempts to correlate the second curve of the electrical log with the permeability and mechanical composition of the sand samples obtained by core drilling and drill-stem sampling. In the case of the core samples there was no apparent relationship between any of the three characteristics in well 3, but in well 5 a slight but distinct increase in the resistivity was accompanied by a large increase in permeability. In well 6 the resistivity in nearly every case varied with the permeability and coarseness of the samples. In well 6 the drilling mud was local clay enriched with Aquagel, whereas in wells 3 and 5 only local clay was used; the data obtained, however, are too meager to be used on a basis for even a tentative conclusion as to the effect of artificial mud on the correlations. In the 15 drill-stem sand samples the data show that, in general, the resistivity of sands having fluid content varies with but is not proportional to the permeability, but there seems to be little or no relationship between the coarseness of the sands and either the resistivity or the permeability. Studies of the relationship of the electrical logs to the salinity of the water indicate that increasing chloride is accompanied by decreasing resistivity. They suggest .that changes in the chloride content are accompanied by large changes in resistivity when the water contains less than 100 parts per million of chloride and by relatively small changes when the chloride content is over 100 parts per million. On the whole, the results of the test drilling from Houston tend to show that, although electrical logs give much information that is useful in the development of water wells, for the present at least these logs should be used in conjunction with driller's logs and drill-stem sampling of both sand and water in all the more promising sand horizons. The tests indicate that an average of 600 feet of .water-bearing sands occurs between the surface and a depth of 1,500 feet along the line of test wells we

Water Supply Paper↗
USGS2022

Hyperspectral remote sensing of white mica: A review of imaging and point-based spectrometer studies for mineral resources, with spectrometer design considerations

Over the past ~30 years, hyperspectral remote sensing of chemical variations in white mica have proven to be useful for ore deposit studies in a range of deposit types. To better understand mineral deposits and to guide spectrometer design, this contribution reviews relevant papers from the fields of remote sensing, spectroscopy, and geology that have utilized spectral changes caused by chemical variation in white micas. This contribution reviews spectral studies conducted at the following types of mineral deposits: base metal sulfide, epithermal, porphyry, sedimentary rock hosted gold deposits, orogenic gold, iron oxide copper gold, and unconformity-related uranium. The structure, chemical composition, and spectral features of white micas, in this contribution defined as muscovite, paragonite, celadonite, phengite, illite, and sericite, are given. Reviewed laboratory spectral studies determined that shifts in the position of the white mica 2200 nm combination feature of 1 nm correspond to a change in Al oct content of approximately ±1.05%. Many of the reviewed spectral studies indicated that a shift in the position of the white mica 2200 nm combination feature of 1 nm was geologically significant. A sensitivity analysis of spectrometer characteristics; bandpass, sampling interval, and channel position, is conducted using spectra of 19 white micas with deep absorption features to determine minimum characteristics required to accurately measure a shift in the position of the white mica 2200 nm combination feature. It was determined that a sampling interval < 16.3 nm and bandpass <17.5 nm are needed to achieve a root mean square error (RMSE) of 2 nm, whereas a sampling interval < 8.8 nm and bandpass <9.8 nm are needed to achieve a RMSE of 1 nm. For comparison, commonly used imaging spectrometers HyMap, AVIRIS-Classic, SpecTIR®'s AisaFENIX 1K, and HySpex tm SWIR 384 have 2.1, 1.2, 0.96, and 0.95 nm RMSE in determining the position of the 2200 nm white mica combination feature, respectively. An additional sensitivity analysis is conducted to determine the effect of signal to noise ratio (SNR) on the RMSE of the position of the white mica 2200 nm combination feature, using spectra of 18 white micas with deep absorption features. For a spectrometer with sampling interval and bandpass of 1 nm, we estimate that RMSEs of 1 and 1.5 nm are achievable with spectra having a minimum SNR of approximately 246 and 64, respectively. For a spectrometer with sampling interval and bandpass of 5 nm, we estimate that RMSEs of 1 and 1.5 nm are attainable with spectra having a minimum SNR of approximately 431 and 84, respectively. When using a spectrometer with a sampling interval 8.8 nm and a bandpass of 9.8 nm, a RMSE of 1 is only achievable with convolved, noiseless reference spectra. For the 8.8_9.8 nm spectrometer, spectra with SNR of 250 and 100 result in RMSE of 1.1 and 1.3, respectively. Therefore, fine spectral resolution characteristics achieve RMSEs better than 1 nm for high SNR spectra while spectrometers with coarse spectral resolution have larger RMSE, perform well with noisy data, and are useful for white mica studies if RMSE of 1.1 to 1.5 nm is acceptable.

Remote Sensing of Environment↗
USGS2012

Geophysical data integration and conditional uncertainty analysis on hydraulic conductivity estimation

Integration of various geophysical data is essential to better understand aquifer heterogeneity. However, data integration is challenging because there are different levels of support between primary and secondary data needed to be correlated in various ways. This study proposes a geostatistical method to integrate the hydraulic conductivity measurements and electrical resistivity data to better estimate the hydraulic conductivity (K) distribution. The K measurements are obtained from the pumping tests and represent the primary data (hard data). The borehole electrical resistivity data from electrical logs are regarded as the secondary data (soft data). The electrical resistivity data is used to infer hydraulic conductivity values through the Archie law and Kozeny-Carman equation. A pseudo cross-semivariogram is developed to cope with the resistivity data non-collocation. Uncertainty in the auto-semivariograms and pseudo cross-semivariogram is quantified. The methodology is demonstrated by a real-world case study where the hydraulic conductivity is estimated in the Upper Chicot aquifer of Southwestern Louisiana. The groundwater responses by the cokriging and cosimulation of hydraulic conductivity are compared using analysis of variance (ANOVA). ?? 2007 ASCE.

Conference Paper↗
USGS2004

Seismic history of the Middle America subduction zone along El Salvador, Guatemala, and Chiapas, Mexico: 1526–2000

We present a catalog of subduction zone earthquakes along the Pacific coast from central El Salvador to eastern Chiapas, Mexico, from 1526 to 2000. We estimate that the catalog is complete since 1690 for M S ≥7.4 thrust events and M ≥ 7.4 normal-faulting events within the upper 60 km of the down-going slab. New intensity maps were constructed for the 27 earthquakes since 1690, using mostly primary data sources. By calibrating with recent events we find that the long axis of the (MM) VII intensity contour for such large earthquakes well approximates the length and location of rupture along the subduction zone and can thus be used to estimate the locations and magnitudes of older events. The section from western El Salvador to Chiapas appears to have ruptured completely in a series of four to five earthquakes during each of the periods 1902–1915, 1743–1776, and possibly 1565–1577. Earthquakes of M W 7.75 ± 0.3 have caused major damage along the 200 km long section from San Salvador to Guatemala City every 71 ± 17 yr, apparently since at least 1575. Although the January 2001 El Salvador earthquake caused damage within part of this zone, no major thrust earthquake has occurred there since at least 1915. We find that much of this section has been relatively quiescent for moderate earthquakes shallower that 50 km since at least 1963. The conditional probability that an earthquake of M W 7.75 ± 0.3 will occur at this location in the next 20 yr is estimated at 50% (±30%).

Chiapas↗
USGS1964

Distribution of mercury, silver, tellurium, arsenic, and antimony in the Rowe Canyon area, White Pine County, Nevada

The accompanying geochemical maps are based in part on data published in U.S. Geological Survey Professional Paper 450-E, Article 180 (Brokaw and others, 1963), and in part on new data acquired since the publication of Professional Paper 450-E. The mercury was determined by atomic absorption techniques, as described by Vaughn and McCarthy (1964), the silver by standard emission spectrographic techniques, and the tellurium, arsenic, and antimony by wet chemical methods.

Nevada↗
USGS1941

Geology and ground-water resources of the Lufkin area, Texas

This report covers Angelina County, Texas, of which Lufkin is the county seat, and parts of Nacogdoches and other adjacent counties. The area is underlain by a series of sands, clays, and shales of Eocene age that dip, in general, southward at an angle a little greater than that of the land surface, which also slopes southward, thus creating favorable artesian conditions. The formations cropping out in the area from north to south are the Wilcox group undifferentiated, the Carrizo sand, the Mont Selman formation, consisting of the Reklaw member, the Queen City sand member, and the Weches greensand member, the Sparta sand, the Cook Mountain and Yegua formations, and the Jackson group undifferentiated. Small supplies of potable water may be obtained from shallow wells in the outcrop areas of most of these formations. Only three of the formations appear to be likely to yield large supplies of water to wells, and in these the water is under sufficient artesian pressure in most places to cause wells to flow. The Yegua formation yields large amounts of water to some wells in the vicinity of Lufkin. However, the water is moderately mineralized and is not acceptable for municipal use except after dilution with surface water and treatment to reduce mineralization. Moreover, most of the wells in this formation yield only small quantities of water, which is highly mineralized. The Sparta sand appears to be likely to yield large supplies of water to wells throughout the northern part of Angelina County. The water, however, is moderately to highly mineralized and cannot be used for purposes that require water of good quality. The Carrizo sand promises to yield large quantities of water low in mineralization in northern Angelina County and southern Nacogdoches County. Computations indicate that the present southward flow through the formation is about 2,750,000 gallons a day, but pumping from wells and thus increasing the hydraulic gradient would greatly increase the flow. Considerable amounts of water will also be released from storage in the formation after pumping begins.

Water Supply Paper↗
USGS1990

Origins of water and solutes in and north of the Norris-Mammoth Corridor, Yellowstone National Park

This study was initiated to investigate the impacts of geothermal development in the Corwin Springs Known Geothermal Resources Area (KGRA) on the hydrothermal features of Yellowstone National Park. To determine possible hydrogeochemical connections, we used the diagnostic stable and radioactive isotopes of several elements, and the chemical and gas compositions of thermal and cold waters from the Norris-Mammoth Corridor and areas north of the Park. The investigations were particularly comprehensive in the Mammoth Hot Springs area, Corwin Springs KGRA, and Chico Hot Springs. The geochemical tools used are still subject to uncertainties of 1 - 5%. Preliminary interpretation of the data, especially the ??D and ??18O values of water, 87Sr/86Sr ratios, ??11B values, composition and isotopes of noble gases and several conservative chemical species would indicate that the waters from Mammoth Hot Springs and La Duke Spring area have evolved chemically and isotopically by reactions with different rock types, and are probably not directly connected. These data indicate that a component (<20%) of water in Bear Creek Springs may be derived from the Mammoth system.

Conference Paper↗