Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Resources and Energy”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources
USGS2020

A two-stage step-wise framework for fast optimization of well placement in coalbed methane reservoirs

Coalbed methane (CBM) has emerged as a clean energy resource in the global energy mix, especially in countries such as Australia, China, India and the USA. The economical and successful development of CBM requires a thorough evaluation and optimization of well placement prior to field-scale exploitation. This paper presents a two-stage, step-wise optimization framework to obtain the optimal placement of wells for large-scale development of CBM reservoirs. In the first stage, an optimal uniform well pattern is obtained by optimizing well pattern description parameters with the particle swarm optimization (PSO) algorithm. Subsequently, the location and status (active/inactive) of each well are perturbed and optimized within the patterns through the integration of the generalized pattern search (GPS) algorithm and a quality map (QM) representing the production potential. This framework was tested in a synthetic anthracite CBM reservoir in the Qinshui basin (with high gas content and low permeability) and a real field high volatile bituminous reservoir in the Illinois basin (with low gas content and high permeability). The results show that: (i) significant variations in the net present value (NPV) exist with respect to different uniform well patterns (even for cases where the total number of wells are identical), the optima of which can be efficiently determined by the PSO within 100 numerical simulation runs; (ii) the optimization of well perturbations by the GPS results in a more noticeable improvement in NPVs for the synthetic (12.3%) than for the real field model (4.6%); (iii) for the low permeable synthetic model with narrow optimal well spacings (320 m × 200 m), the contribution of the optimization of well perturbation to the NPV increment is heavily dependent on the uniform well placement solution; (iv) for the high permeable real field model with large optimal well spacings (1300 m × 1300 m), the initial uniform well placement has a very minor effect on the subsequent well perturbation solutions in terms of NPV; (v) the proposed framework significantly outperforms the conventional well-by-well concatenation procedure in terms of computational efficiency, robustness and optimal criteria set for production potential.

International Journal of Coal Geology↗
USGS2021

New geochemical tools for investigating resource and energy functions at deep-sea cold seeps using amino-acid δ15N in chemosymbiotic mussels (Bathymodiolus childressi)

In order to reconstruct the ecosystem structure of chemosynthetic environments in the fossil record, geochemical proxies must be developed. Here, we present a suite of novel compound-specific isotope parameters for tracing chemosynthetic production with a focus on understanding nitrogen dynamics in deep-sea cold seep environments. We examined the chemosymbiotic bivalve Bathymodiolus childressi from three geographically distinct seep sites on the NE Atlantic Margin and compared isotope data to non-chemosynthetic littoral mussels to test whether water depth, seep activity, and/or mussel bed size are linked to differences in chemosynthetic production. The bulk isotope analysis of carbon (δ 13 C) and nitrogen (δ 15 N), and δ 15 N values of individual amino acids (δ 15 N AA ) in both gill and muscle tissues, as well as δ 15 N AA- derived parameters including trophic level (TL), baseline δ 15 N value (δ 15 N Phe ), and a microbial resynthesis index (Σ V ), were used to investigate specific geochemical signatures of chemosynthesis. Our results show that δ 15 N AA values provide a number of new proxies for relative reliance on chemosynthesis, including TL, ∑V, and both δ 15 N values and molar percentages (Gly/Glu mol% index) of specific AA. Together, these parameters suggested that relative chemoautotrophy is linked to both degree of venting from seeps and mussel bed size. Finally, we tested a Bayesian mixing model using diagnostic AA δ 15 N values, showing that percent contribution of chemoautotrophic versus heterotrophic production to seep mussel nutrition can be directly estimated from δ 15 N AA values. Our results demonstrate that δ 15 N AA analysis can provide a new set of geochemical tools to better understand mixotrophic ecosystem function and energetics, and suggest extension to the study of ancient chemosynthetic environments in the fossil record.

Geobiology↗
USGS2018

Flight response to spatial and temporal correlates informs risk from wind turbines to the California Condor

Wind power is a fast-growing energy resource, but wind turbines can kill volant wildlife, and the flight behavior of obligate soaring birds can place them at risk of collision with these structures. We analyzed altitudinal data from GPS telemetry of critically endangered California Condors ( Gymnogyps californianus ) to assess the circumstances under which their flight behavior may place them at risk from collision with wind turbines. Condor flight behavior was strongly influenced by topography and land cover, and birds flew at lower altitudes and closer to the rotor-swept zone of wind turbines when over ridgelines and steep slopes and over forested and grassland cover types. Condor flight behavior was temporally predictable, and birds flew lower and closer to the rotor-swept zone during early morning and evening hours and during the winter months, when thermal updrafts were weakest. Although condors only occasionally flew at altitudes that placed them in the rotor-swept zone of turbines, they regularly flew near or within wind resource areas preferred by energy developers. Practitioners aiming to mitigate collision risk to this and other soaring bird species of conservation concern can consider the manner in which flight behavior varies temporally and in response to areas of high topographic relief and proximity to nocturnal roosting sites. By contrast, collision risk to large soaring birds from turbines should be relatively lower over flatter and less rugged areas and in habitat used during daytime soaring.

California↗
USGS2007

Regional Fluid Flow and Basin Modeling in Northern Alaska

The foothills of the Brooks Range contain an enormous accumulation of zinc (Zn) in the form of zinc sulfide and barium (Ba) in the form of barite in Carboniferous shale, chert, and mudstone. Most of the resources and reserves of Zn occur in the Red Dog deposit and others in the Red Dog district; these resources and reserves surpass those of most deposits worldwide in terms of size and grade. In addition to zinc and lead sulfides (which contain silver, Ag) and barite, correlative strata host phosphate deposits. Furthermore, prolific hydrocarbon source rocks of Carboniferous and Triassic to Early Jurassic age generated considerable amounts of petroleum that may have contributed to the world-class petroleum resources of the North Slope. Deposits of Zn-Pb-Ag or barite as large as those in the Brooks Range are very rare on a global basis and, accordingly, multiple coincident favorable factors must be invoked to explain their origins. To improve our understanding of these factors and to contribute to more effective assessments of resources in sedimentary basins of northern Alaska and throughout the world, the Mineral Resources Program and the Energy Resources Program of the U.S. Geological Survey (USGS) initiated a project that was aimed at understanding the petroleum maturation and mineralization history of parts of the Brooks Range that were previously poorly characterized. The project, titled “Regional Fluid Flow and Basin Modeling in Northern Alaska,” was undertaken in collaboration with industry, academia, and other government agencies. This Circular contains papers that describe the results of the recently completed project. The studies that are highlighted in these papers have led to a better understanding of the following: The complex sedimentary facies relationships and depositional settings and the geochemistry of the sedimentary rocks that host the deposits (sections 2 and 3). The factors responsible for formation of the barite and zinc deposits (sections 4 and 5). The geochemical indicators or exploration tools that might be used to locate other large deposits of similar character in the Red Dog district and elsewhere (section 6). The isotopic compositions of barite and sulfide deposits (sections 7 and 8) The distribution and nature of phosphate and metalliferous oil shale localities (sections 9 and 10). The architecture, kinematics, and timing of the complex thrust systems that disrupted and redistributed the Carboniferous and younger rocks; these studies are necessary in order to make a realistic palinspastic reconstruction of the basin (sections 11 and 12). The nature and extent of the petroleum system sourced from Mississippian rocks (section 13).

Circular↗
USGS2026

Colocating artificial intelligence data centers with energy infrastructure on Federal public lands—A science synthesis and spatial analysis to inform decision making

Executive Summary Artificial intelligence (AI) is rapidly transforming industries and economies, creating an urgent need to strategically plan for the energy and infrastructure required to support increasing AI use. U.S. Federal agencies and bureaus have been directed to explore ways to accelerate permitting, development, and deployment of energy resources and AI technologies, including encouraging the colocation of energy infrastructure and data centers. To inform these initiatives, this report synthesizes relevant scientific information and presents a spatial analysis of existing energy infrastructure and data centers on or near U.S. Federal public lands managed by the Bureau of Land Management (BLM). The purpose of this science synthesis and spatial analysis is to provide the BLM with foundational information for considering potential colocation of data centers with energy infrastructure on Federal public lands to support evidence-based decisions. Additionally, this report provides insight into current (2025) and potential future energy demands by providing projections of a range of potential future environmental conditions relevant to maintaining industry-recommended cooling temperature standards necessary for efficient data center operations. As a part of this effort, a rapid response literature review was conducted of the best available science on the topic of data center development and energy infrastructure in July–August 2025, supplemented by additional resources recommended by U.S. Federal agency and bureau subject matter experts (hereafter experts; including the U.S. Department of Energy National Laboratory of the Rockies) and peer reviewers. To better understand current conditions relevant to AI data center development, a spatial analysis was conducted across Alaska and 11 States in the Western United States, Arizona, California, Colorado, Idaho, Montana, Nevada, New Mexico, Oregon, Utah, Washington, and Wyoming, all of which contain extensive BLM-managed surface lands (hereafter referred to as “BLM lands”) that could be considered for the colocation of energy infrastructure and AI data centers. This effort identified BLM lands within 10 miles of existing transmission lines, consistent with methods used in previous BLM programmatic environmental impact statements. This report describes the types of data centers operating within the United States, which vary in ownership, size, technology, and proximity to end users. This report then outlines the primary considerations of data center development, including reliable energy supply, natural resources (such as water availability to support cooling requirements), and relevant policy and regulatory considerations. Energy supply considerations are pivotal for data center operation. Between 2014 and 2018, data centers in the United States accounted for nearly 2 percent of the Nation’s total electricity consumption, and data center energy consumption is projected to increase from 2 to 6.7–12 percent of total U.S. electricity use by 2028. These energy requirements necessitate careful consideration of energy supply when considering potentially suitable locations for data center development. Experts anticipate that an increase in renewable energy generation will likely support most potential future power demand needs, including for data centers, followed by increases in natural gas, nuclear, and geothermal energy production. Additional capacity in the form of battery storage will likely not generate electricity, but may improve the reliability and flexibility of supply, helping to ensure that growing data center loads can be met. However, the U.S. Department of Energy estimates that the United States will need, on average, 57 percent more energy transmission infrastructure by 2035 to account for the growing power demand introduced by development such as data centers. Cooling server equipment in data centers requires large amounts of electricity and water, and this demand can be exacerbated by hot and humid conditions. Energy efficient water-based cooling technologies may reduce electricity consumption onsite but require more water consumption. This additional water demand has the potential to increase water stress and competition with other users. As such, developing data centers will likely need a thorough assessment of current and potential future water availability, as well as consideration of how water demand may change across other sectors. Data center development involves policy and regulatory considerations, as projects must undergo environmental review and authorization processes that can take 18–24 months. Coordinating these environmental reviews and authorizations with other energy development projects, such as building new transmission lines, may cause additional delays. Recent efforts by the U.S. Department of Energy and U.S. Department of the Interior aim to expedite environmental reviews and authorizations and improve coordination across agencies. The spatial analysis identified 771 existing AI data centers and more than 3,300 power plants. The spatial analysis found that 6 percent of AI data centers and 22 percent of power plants in the Western United States were on or within 1 mile of BLM lands, and California had the largest number of facilities. Most existing AI data centers were near high-voltage transmission lines and close to power plants, supporting efficient energy delivery. More than 90,000,000 acres of BLM lands were within 10 miles of existing high-voltage transmission lines, representing 38 percent of BLM lands in the study area. Available transmission infrastructure and the overlap with BLM lands varied by State, and Alaska had limited overlap compared to the rest of the Western United States. To operate most efficiently, data center temperatures must be at or below 80.6 degrees Fahrenheit. This analysis of future temperature and precipitation projections indicated increasing cooling demands for data centers, particularly in Arizona, California, and Nevada, where rising temperatures are expected to increase energy and operational costs while potentially stressing current regional electrical grid infrastructure. This report highlights relevant energy supply, natural resources, and regulatory considerations for data center development on BLM lands. This report does not provide a comprehensive ecological, regulatory, land suitability, or permitting analysis. The factors described here are contextual considerations only and are not intended to identify, rank, quantify, or recommend optimal areas for data center colocation. This spatial analysis focused solely on energy considerations relevant to data centers and did not consider water availability, critical habitats, BLM National Conservation Lands, areas of cultural or historical significance, and other sensitive resources. These topics are recognized as critical but were not within the scope of this science synthesis and spatial analysis.

Scientific Investigations Report↗
USGS2016

Developing integrated methods to address complex resource and environmental issues

Introduction This circular provides an overview of selected activities that were conducted within the U.S. Geological Survey (USGS) Integrated Methods Development Project, an interdisciplinary project designed to develop new tools and conduct innovative research requiring integration of geologic, geophysical, geochemical, and remote-sensing expertise. The project was supported by the USGS Mineral Resources Program, and its products and acquired capabilities have broad applications to missions throughout the USGS and beyond. In addressing challenges associated with understanding the location, quantity, and quality of mineral resources, and in investigating the potential environmental consequences of resource development, a number of field and laboratory capabilities and interpretative methodologies evolved from the project that have applications to traditional resource studies as well as to studies related to ecosystem health, human health, disaster and hazard assessment, and planetary science. New or improved tools and research findings developed within the project have been applied to other projects and activities. Specifically, geophysical equipment and techniques have been applied to a variety of traditional and nontraditional mineral- and energy-resource studies, military applications, environmental investigations, and applied research activities that involve climate change, mapping techniques, and monitoring capabilities. Diverse applied geochemistry activities provide a process-level understanding of the mobility, chemical speciation, and bioavailability of elements, particularly metals and metalloids, in a variety of environmental settings. Imaging spectroscopy capabilities maintained and developed within the project have been applied to traditional resource studies as well as to studies related to ecosystem health, human health, disaster assessment, and planetary science. Brief descriptions of capabilities and laboratory facilities and summaries of some applications of project products and research findings are included in this circular. The work helped support the USGS mission to “provide reliable scientific information to describe and understand the Earth; minimize loss of life and property from natural disasters; manage water, biological, energy, and mineral resources; and enhance and protect our quality of life.” Activities within the project include the following: Spanned scales from microscopic to planetary; Demonstrated broad applications across disciplines; Included life-cycle studies of mineral resources; Incorporated specialized areas of expertise in applied geochemistry including mineralogy, hydrogeology, analytical chemistry, aqueous geochemistry, biogeochemistry, microbiology, aquatic toxicology, and public health; and Incorporated specialized areas of expertise in geophysics including magnetics, gravity, radiometrics, electromagnetics, seismic, ground-penetrating radar, borehole radar, and imaging spectroscopy. This circular consists of eight sections that contain summaries of various activities under the project. The eight sections are listed below: Laboratory Facilities and Capabilities, which includes brief descriptions of the various types of laboratories and capabilities used for the project; Method and Software Development, which includes summaries of remote-sensing, geophysical, and mineralogical methods developed or enhanced by the project; Instrument Development, which includes descriptions of geophysical instruments developed under the project; Minerals, Energy, and Climate, which includes summaries of research that applies to mineral or energy resources, environmental processes and monitoring, and carbon sequestration by earth materials; Element Cycling, Toxicity, and Health, which includes summaries of several process-oriented geochemical and biogeochemical studies and health-related research activities; Hydrogeology and Water Quality, which includes descriptions of innovative geophysical, remote-sensing, and geochemical research pertaining to hydrogeology and water-quality applications; Hazards and Disaster Assessment, which includes summaries of research and method development that were applied to natural hazards, human-caused hazards, and disaster assessments; and Databases and Framework Studies, which includes descriptions of fundamental applications of geophysical studies and of the importance of archived data.

Circular↗
USGS2011

The development of an EDSS: Lessons learned and implications for DSS research

The Solar and Wind Energy Resource Assessment (SWERA) project is focused on providing renewable energy (RE) planning resources to the public. Examples include wind, solar, and hydro assessments. SWERA DSS consists of three major components. First, SWERA 'Product Archive' provides for a discovery DSS upon which users can find and access renewable energy data and supporting models. Second, the 'Renewable Resource EXplorer' (RREX) component serves as a web-based, GIS analysis tool for viewing RE resource data available through the SWERA Product Archive. Third, the SWERA web service provides computational access to the data available in the SWERA spatial database through a location based query, and is also utilized in the RREX component. We provide a discussion of various design decisions used in the construction of this EDSS, followed by project experiences and implications for EDSS and broader DSS research.

Conference Paper↗
USGS1981

Appraisal of Hydrologic Information Needed in Anticipation of Lignite Mining in Lauderdale County, Tennessee

Lignite in western Tennessee occurs as lenses or beds at various stratigraphic horizons in the Coastal Plain sediments of Late Cretaceous and Tertiary age. The occurrence of this lignite has been known for many decades, but not until the energy crisis was it considered an important energy resource. In recent years, several energy companies have conducted extensive exploration programs in western Tennessee, and tremendous reserves of lignite have been found. From available information, Lauderdale County was selected as one of the counties where strip-mining of lignite will most likely occur. Lignite in this county occurs in the Jackson and Cockfield Formations, undivided, of Tertiary age. The hydrology of the county is known only from regional studies and the collection of some site-specific data. Therefore, in anticipation of the future mining of lignite, a plan is needed for obtaining hydrologic and geologic information to adequately define the hydrologic system before mining begins and to monitor the effects of strip-mining once it is begun. For this planning effort, available hydrologic, geologic, land use, and associated data were located and compiled; a summary description of the surface and shallow subsurface hydrologic system was prepared: the need for additional baseline hydrologic information was outlined; and plans to monitor the effects of strip-mining were proposed. This planning approach, although limited to a county area, has transferability to other Coastal Plain areas under consideration for strip-mining of lignite.

Water-Resources Investigations Report↗
USGS2018

Groundwater chemistry and water-level elevations in bedrock aquifers of the Piceance and Yellow Creek watersheds, Rio Blanco County, Colorado, 2013–16

The Piceance and Yellow Creek watersheds in Rio Blanco County, Colorado, are known to contain important energy resources (oil shale and natural gas) and mineral resources (nahcolite). The primary sources of fresh groundwater in the Piceance and Yellow Creek watersheds are bedrock aquifers in the Uinta and Green River Formations. The aquifers are divided into an upper and lower aquifer separated by a regionally extensive semiconfining layer. These aquifers provide water to streams and springs in the watersheds and are an important resource to people living and working in the area. Development of energy and mineral resources has the potential to affect the quality of groundwater in several ways. The Bureau of Land Management and the U.S. Geological Survey began groundwater monitoring in 2010 to characterize the groundwater quality and water-level elevations of shallow bedrock aquifers in the Piceance and Yellow Creek watersheds. The purpose of this report is to present ground-water chemistry and water-level elevations collected during 2013–16. Comparisons are made to data that were collected from the bedrock aquifers from 2010 to 2012 to identify the potential for changes in water quality and water-level elevations. Appreciable changes in water-level elevations and hydraulic gradient were observed in early April 2015 in two wells completed in the upper and lower aquifers. The hydraulic gradient between the two wells was consistently downward from the upper aquifer to the lower aquifer during 2010–15; however, in early April 2015, the gradient changed from downward to upward between the two aquifers. Overall, water-level elevations declined by about 14 and 11 feet in the upper and lower aquifers, respectively, from 2013 to 2016. Previously published data estimated groundwater ages at 1,200 years old in the upper aquifer and 9,600 years old in the lower aquifer. These groundwater ages indicate that ground-water was recharged over thousands of years. With such long periods of time for aquifer recharge, declines in water-level elevation over short time steps (a few months) have important implications for sustainable management of this resource. Solution mining activities or drilling for oil and natural gas in the area could be related to the changes observed in water-level elevations in these wells; however, further investigation would be needed to evaluate causation. Changes in major-ion chemistry were evaluated in the bedrock aquifer using time series plots of select major-ion data from 2010 to 2016. Major-ion chemistry was variable for a single well from 2010 to 2016 where alkalinity and sulfate were the most variable constituents. One possible explanation for the observed changes in major-ion chemistry may be that the sample depth for that well no longer represents the most appreciable flow in the borehole. On a larger scale, potential changes in flow within the borehole may indicate changes in the regional flow system. Methane and volatile organic compound concentrations were evaluated using a similar approach to that of major ions and had similar findings. Methane concentrations in wells sampled from 2010 to 2016 were generally constant. The only exception was observed at a single well where the range of methane concentrations was from 57.4 (2010) to 4.02 milligrams per liter (2013). This is the same well where changes in water-level elevation, hydraulic gradient, and major-ion chemistry were observed, providing multiple lines of evidence to indicate change in the bedrock aquifers. Sampling of a well located in an area with little energy development but where faults or fractures could provide a path for the migration of fluids indicate mixing of groundwater between the upper and lower aquifers.

Colorado↗
USGS1984

Index for reports released through the Department of Energy, DOE National Uranium Resource Evaluation Program, and Atomic Energy Commission

The U.S. Government's National Uranium Resource Evaluation (NURE) Program commenced in 1974 and was last comprehensively reported on in An Assessment Report on Uranium in the United States of America , GJO-111(80), dated October 1980. During the seven years of the NURE Program, an unprecedented quantity of geoscience information was gathered throughout the conterminous United States and Alaska. The resulting data bases in geology, geophysics, and geochemistry are substantial and can be applied to the search for many mineral resource commodities other than uranium. This paper describes briefly what data are available, where the data are located, and how they can be obtained by the public. These data fall into seven major categories: Geologic Quadrangle Maps, Radiometric Data from Aerial Surveys, Magnetic Data from Aerial Surveys, Geochemical Data from Waters and Sediments, Radiometric Data from Borehole Logging, Mineralogic Data from Rock Sample Analysis, Evaluation Data for Resource Estimates. Nearly all the NURE data were acquired, are organized, and can be accessed by National Topographic Map Series (NTMS) 1:250,000-scale quadrangle. Figures 1 and 2 show the distribution of these quadrangles throughout the lower 48 states and Alaska, respectively. Listed below are the 20 repositories scattered across the country where the U.S. Department of Energy (DOE) has placed most of the information on open-file.

Report↗
USGS2006

Chapter 4: The GIS Project for the Geologic Assessment of Undiscovered Oil and Gas in the Upper Cretaceous Navarro and Taylor Groups, Western Gulf Province, Texas

A geographic information system (GIS) focusing on the Upper Cretaceous Navarro and Taylor Groups in the Gulf Coast region was developed as a visual-analysis tool for the U.S. Geological Survey's 2003 assessment of undiscovered, technically recoverable oil and natural gas resources in the Western Gulf Province. The Central Energy Resources Team of the U.S. Geological Survey has also developed an Internet Map Service to deliver the GIS data to the general public. This mapping tool utilizes information from a database about the oil and natural gas endowment of the United States - including physical locations of geologic and geographic data - and converts the data into visual layers. Portrayal and analysis of geologic features on an interactive map provide an excellent tool for understanding domestic oil and gas resources for strategic planning, formulating economic and energy policies, evaluating lands under the purview of the Federal Government, and developing sound environmental policies. Assessment results can be viewed and analyzed or downloaded from the internet web site.

Data Series↗
USGS2024

Model predictions of global geologic hydrogen resources

Geologic hydrogen could be a low-carbon primary energy resource; however, the magnitude of Earth’s subsurface endowment has not yet been assessed. Knowledge of the occurrence and behavior of natural hydrogen on Earth has been combined with information from geologic analogs to construct a mass balance model to predict the resource potential. Given the associated uncertainty, stochastic model results predict a wide range of values for the potential in-place hydrogen resource [10 3 to 10 10 million metric tons (Mt)] with the most probable value of ~5.6 × 10 6 Mt. Although most of this hydrogen is likely to be impractical to recover, a small fraction (e.g., 1 × 10 5 Mt) would supply the projected hydrogen needed to reach net-zero carbon emissions for ~200 years. This amount of hydrogen contains more energy (~1.4 × 10 16 MJ) than all proven natural gas reserves on Earth (~8.4 × 10 15 MJ). Study results demonstrate that further research into understanding the potential for geologic hydrogen resources is merited.

Science Advances↗
USGS2006

Metallogeny of the Great Basin: Crustal evolution, fluid flow, and ore deposits

The Great Basin physiographic province in the Western United States contains a diverse assortment of world-class ore deposits. It currently (2006) is the world’s second leading producer of gold, contains large silver and base metal (Cu, Zn, Pb, Mo, W) deposits, a variety of other important metallic (Fe, Ni, Be, REE’s, Hg, PGE) and industrial mineral (diatomite, barite, perlite, kaolinite, gallium) resources, as well as petroleum and geothermal energy resources. Ore deposits are most numerous and largest in size in linear mineral belts with complex geology. U.S. Geological Survey (USGS) scientists are in the final year of a research project initiated in the fall of 2001 to increase understanding of relations between crustal evolution, fluid flow, and ore deposits in the Great Basin. Because of its substantial past and current mineral production, this region has been the focus of numerous investigations over the past century and is the site of ongoing research by industry, academia, and state agencies. A variety of geoinformatic tools was used to organize, reinterpret, and display, in space and time, the large amounts of geologic, geophysical, geochemical, and hydrologic information deemed pertinent to this problem. This information, in combination with concentrated research on (1) critical aspects of the geologic history, (2) an area in northern Nevada that encompasses the major mineral belts, and (3) important mining districts and deposits, is producing new insights about the interplay between key tectonic events, hydrothermal fluid flow, and ore genesis in mineral belts. The results suggest that the Archean to Holocene history of the Great Basin was punctuated by several tectonic events that caused fluids of different origins (sea water, basinal brine, meteoric water, metamorphic water, magmatic water) to move through the crust. Basement faults reactivated during these events localized deformation, sedimentation, magmatism, and hydrothermal fluid flow in overlying rocks to form mineral belts that contain ore deposits of different types and ages that are locally superimposed (demonstrating inheritance). Fluid flow in these systems also was influenced by the distribution of permeable lithologies and paleotopographic highs and lows. Hydrothermal fluids evolved from their initial chemistries towards compositions that reflect the ƒ O 2 and ƒ S 2 buffering capacity of, and the ligands and metals present in, the rocks (±older mineralization) through which they moved. In northern Nevada, where gold deposits are relatively common, carbonaceous, pyritic strata buffered fluids of diverse origins to H 2 S-rich compositions so they could transport gold repeatedly over Paleozoic-Cenozoic time (convergent evolution). Ore formed where metal-laden fluids encountered effective physicochemical traps. Maps of Neogene basin fill and erosion surfaces identify areas where preexisting ore deposits have been progressively exposed or concealed. Comparisons with analogous terrains and deposit types in other parts of the world provide global context. The initial findings and some of the databases, geologic maps, sections, reconstructions, hydrogeologic models, topical syntheses, regional overviews, short courses, field guides, and deposit comparisons produced by project staff and associated managers, contractors, and collaborators have been presented in numerous abstracts, symposia, USGS publications, and professional journals over the last 5 years (see the extensive bibliography). Notable among these was the 2005 Geological Society of Nevada symposium in Reno, Nevada, and the 2005 Geological Society of America annual meeting in Salt Lake City, Utah, where project results were presented to audiences from around the nation and world. The final results of the project will be submitted for publication in 2007 to appropriate USGS and professional journals. A special issue of GEOSPHERE, scheduled for publication in 2007, will be devoted to the results of this project and related work. This special issue will reach an international audience and be available worldwide on the internet. Much of the research for this project has concentrated on areas that will receive the focused attention of the mining industry in the future. As such, the data and interpretations generated by this project have direct use for land-use managers in Federal, State, and local agencies. Improved hydrogeologic models developed by this project will considerably enhance ongoing and future water resource investigations in the region. The increased understanding of when, where, and how hydrothermal systems produce significant economic deposits has direct uses for mineral exploration and for future USGS mineral resource assessments in the Great Basin and other parts of the world.

Great Basin↗
USGS2016

Overview with methods and procedures of the U.S. Geological Survey mineral-resource assessment of the Sagebrush Focal Areas of Idaho, Montana, Nevada, Oregon, Utah, and Wyoming: Chapter A in Mineral resources of the Sagebrush Focal Areas of Idaho, Montana, Nevada, Oregon, Utah, and Wyoming

This report, chapter A of Scientific Investigations Report 2016–5089, provides an overview of the U.S. Geological Survey (USGS) Sagebrush Mineral-Resource Assessment (SaMiRA). The report also describes the methods, procedures, and voluminous fundamental reference information used throughout the assessment. Data from several major publicly available databases and other published sources were used to develop an understanding of the locatable, leaseable, and salable mineral resources of this vast area. This report describes the geologic, mineral-occurrence, geochemical, geophysical, remote-sensing, and Bureau of Land Management mineral-case-status data used for the assessment, along with the methods for evaluating locatable mineral-resource potential. The report also discusses energy-resource data (oil and gas, coal, and geothermal) used in the assessment. Appendixes include summary descriptive mineral-deposit models that provide the criteria necessary to assess for the pertinent locatable minerals and market-demand commodity profiles for locatable mineral commodities relevant to the project. Datasets used in the assessment are available as USGS data releases.

Idaho, Montana, Nevada, Oregon, Utah, Wyoming↗
USGS2022

The potential of wave energy conversion to mitigate coastal erosion from hurricanes

Wave energy conversion technologies have recently attracted more attention as part of global efforts to replace fossil fuels with renewable energy resources. While ocean waves can provide renewable energy, they can also be destructive to coastal areas that are often densely populated and vulnerable to coastal erosion. There have been a variety of efforts to mitigate the impacts of wave- and storm-induced erosion; however, they are either temporary solutions or approaches that are not able to adapt to a changing climate. This study explores a green and sustainable approach to mitigating coastal erosion from hurricanes through wave energy conversion. A barrier island, Dauphin Island, off the coast of Alabama, is used as a test case. The potential use of wave energy converter farms to mitigate erosion due to hurricane storm surges while simultaneously generating renewable energy is explored through simulations that are forced with storm data using the XBeach model. It is shown that wave farms can impact coastal morphodynamics and have the potential to reduce dune and beach erosion, predominantly in the western portion of the island. The capacity of wave farms to influence coastal morphodynamics varies with the storm intensity.

Alabama↗
USGS2015

Effects of Hydrocarbon Extraction on Landscapes of the Appalachian Basin

An important and sometimes overlooked aspect of contemporary natural gas exploration, development, and delivery activities is the geographic profile and spatial footprint that these activities have on the land surface. The function of many ecosystems and the goods and services they provide, in large part, are the result of their natural spatial arrangement on the landscape. Shale-gas development can create alterations to the pattern of land use and land cover, and represents a specific form of land use and land cover change that can substantially impact critical aspects of the spatial pattern, form, and function of landscape interactions, including many biological responses. The need for energy resources has created numerous economic opportunities for hydrocarbon extraction in the Appalachian basin. The development of alternative energy natural gas resources from deep-shale drilling techniques, along with conventional natural gas extraction methods, has created a flurry of wells, roads, pipelines, and related infrastructure across many parts of the region. An unintended and sometimes overlooked consequence of these activities is their effect on the structure and function of the landscape and ecosystems. The collective effect of over 100,000 hydrocarbon extraction permits for oil, coal bed methane, Marcellus and Utica Shale natural gas wells, and other types of hydrocarbon gases and their associated infrastructure has saturated much of the landscape and disturbed the natural environment in the Appalachian basin. The disturbance created by the sheer magnitude of the development of these collective wells and infrastructure directly affects how the landscape and ecosystems function and how they provide ecological goods and services.

New York, Ohio, Pennsylvania, Virginia, West Virgi↗
USGS2000

Geohydrology of the shallow aquifers in the Greeley-Nunn area, Colorado

Urban areas commonly rely on ground water for at least part of the municipal water supply, and as population increases, urban areas expand and require larger volumes of water. However, the expansion of an urban area can reduce ground-water availability. This may occur through processes of depletion (withdrawal of most of the available ground water), degradation (chemicals used in the urban area seep into the ground and contaminate the ground water), and preemption (cost or restrictions on pumping ground water from under extensively urbanized areas may be prohibitive). Thus, a vital natural resource needed to support the growth of an urban area and its infrastructure can become less available because of growth itself. The diminished availability of natural resources caused by expansion of urban areas is not unique to water resources. For example, large volumes of aggregate (sand and gravel) are used in concrete and asphalt to build and maintain the infrastructure (buildings, roads, airports, and so forth) of an urban area. Yet, mining of aggregate commonly is preempted by urban expansion; for example, it cannot be mined from under a subdivision. Energy resources such as coal, oil, and natural gas likewise are critical to the growth and vitality of an urban area but may become less available as an urban area expands and preempts mining and drilling. In 1996, the U.S. Geological Survey began work on a national initiative designed to provide information on the availability of those natural resources (water, minerals, energy, and biota) that are critical to maintaining the Nation's infrastructure or that may become less available because of urban expansion. The initiative began with a 3-year demonstration project to develop procedures for assessing resources and methods for interpreting and publishing information in digital and traditional paper formats. The Front Range urban corridor of Colorado was chosen as the demonstration area (fig. 1), and the project was titled the Front Range Infrastructure Resources Project (FRIRP). This report and those of Robson (1996), Robson and others (1998), and Robson and others (2000a, 2000b, 2000c) are the results of FRIRP water-resources investigations; reports pertaining to geology, minerals, energy, biota, and cartography of the FRIRP are published separately. The water resources studies of the FRIRP were undertaken in cooperation with the Colorado Department of Natural Resources, Division of Water Resources. and the Colorado Water Conservation Board.

Hydrologic Atlas↗