Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “New Zealand Journal of Geology and Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,690 records · Page 6Linked to original sources
USGS2025

Unveiling coseismic deformation from differenced legacy aerial photography and modern lidar topography: The 1983 M6.9 Borah Peak earthquake, Idaho, USA

The 1983 M6.9 Borah Peak, Idaho, earthquake is one of the largest historical normal fault earthquakes in the western United States. We quantified meter-scale vertical change along the 35 km-long rupture using topographic differencing of 1966 aerial imagery and 2019 lidar-derived data. The initial differencing results are largely obscured by horizontal and vertical georeferencing errors and flight-line stripes. Our error corrections are designed to be insensitive to the coseismic deformation and reduced error by 50%. We calculated vertical separation and resolved a maximum of 2.02 ± 0.46 m at Doublespring Pass. Our vertical separation measurements are generally consistent with those from prior studies using field data and post-earthquake topographic data. However, the differencing measurements are a few decimeters lower than these prior measurements, indicating that differencing can isolate historical from prehistoric earthquake deformation. Our study demonstrates that revisiting historical earthquakes can provide new insights into the magnitude and patterns of coseismic deformation.

Idaho↗
USGS2025

Drone-based radiometric surveys provide high-resolution mine waste characterization

Airborne radiometric surveys use passive geophysical techniques to characterize geochemical variations at or near earth’s surface. These methods have been used for a variety of mapping applications, including mineral resource evaluation. However, detailed characterization of smaller geologic targets, including mine waste features, requires flying at lower altitudes and with tighter line spacing than is feasible with traditional aircraft. Here, a small uncrewed aircraft system (sUAS) equipped with a radiometric sensor was used to acquire high-resolution gamma-spectrometry over small mine waste features and a low-grade stockpile in southwestern New Mexico. The sUAS radiometric system mapped local variability within each survey area and revealed ~2–10 m wide zones where radioelements K, Th, and U may be elevated 2–10× the surrounding material. Additionally, the sUAS radiometric data revealed radioelement variability across survey sites, which correlated reasonably well with variability seen in geochemical samples at each survey site, even though samples collected from individual sites showed high local variability. The sUAS data characterized local heterogeneity within mine waste and other small geologic targets at scales of a few meters to tens of meters, which is not possible with traditional crewed aircraft, and with continuity of coverage that is not possible with ground surveys, thus filling a key gap in geophysical survey spatial resolution.

New Mexico↗
USGS2023

Overview of the Cenozoic geology of the northern Harrat Rahat volcanic field, Kingdom of Saudi Arabia

The Harrat Rahat volcanic field, located in the west-central part of the Kingdom of Saudi Arabia, is one of the larger Cenozoic harrats among the more than 17 harrats situated upon the Arabia Plate. The map plate contained herein shows, at a scale of 1:100,000, the mapped volcanic geology of northern Harrat Rahat, which consists of the northernmost one-fifth of Harrat Rahat. Northern Harrat Rahat has an area of about 3,340 square kilometers (km 2 ), of which 2,567 km 2 is covered by Harrat Rahat volcanic rocks and deposits, and it encompasses more than 900 exposed vents (that is, craters, cryptodomes, maars, and scoria cones), 289 of which are isolated by younger volcanic deposits and have not been correlated with the 234 volcanic rock units distinguished by geologic mapping. Northern Harrat Rahat is of special interest owing to its proximity to the city of Al Madinah al Munawwarah, which sits within, and is continuing to expand southward over, the north end of the volcanic field. Al Madinah is home to an expanding population, currently at more than 2 million residents, together with the intermittent addition of approximately 3 million pilgrims during Hajj and Umrah (religious visitations). The center of Al Madinah is less than 8 km from lava flows of the only confirmed historically documented eruption, which occurred in 1256 C.E. (654 A.H.). Earlier prehistoric lava flows also encroached into the area of the present-day city limits, as demonstrated by volcanic rocks exposed widely throughout the city in roadcuts, parks, and excavations for new buildings, although no evidence has been found of any other than the 1256 C.E. lava having reached that area during times of human habitation. Geologic mapping was undertaken by the U.S. Geological Survey in collaboration with the Saudi Geological Survey. The features of primary interest within the map area are scoria cones, lava flows, lava domes, craters, and pyroclastic deposits from the Quaternary, which have compositions of basalt, hawaiite, mugearite, benmoreite, and trachyte. The geologic mapping was published by Downs and others (2019) on a single sheet at 1:75,000 scale and two detailed sheets at 1:25,000 scale, accompanied by detailed explanations of the geology. This report presents the geology on a single sheet at 1:100,000 scale and provides condensed geologic explanations for the convenience of readers of this volume. Some minor errors of nomenclature and lava source regions that do not change fundamental interpretations have been corrected herein.

Professional Paper↗
USGS2026

Bedrock geologic map of the Eagle Lake quadrangle, Essex County, New York

The bedrock geology of the 7.5-minute Eagle Lake quadrangle, Essex County, New York, consists of deformed and metamorphosed Mesoproterozoic gneisses of the Adirondack Highlands unconformably overlain by weakly deformed lower Paleozoic sedimentary rocks of the Champlain Valley. The Mesoproterozoic rocks occur on the eastern edge of the Adirondack Highlands and represent an extension of the Grenville Province of Laurentia. Granulite facies Mesoproterozoic paragneiss, marble, and amphibolite hosted the emplacement of an anorthosite-mangerite-charnockite-granite (AMCG) suite, now exposed mostly as orthogneiss, at approximately 1.18–1.15 giga-annum (Ga, billion years before present). The earliest of four phases of deformation (D1) predated AMCG magmatism and is characterized by gneissosity, rarely preserved F1 isoclinal folds, and migmatite in the paragneiss host rocks. A sample of hornblende quartz syenite from the AMCG suite, collected from an abandoned railroad cut on Old Furnace Road, yielded a U-Pb zircon age of 1,149±10 million years before present. D2 deformation produced a composite penetrative gneissosity, migmatite, and isoclinal F2 folds. Towards the end of D2, felsic magmatism (including the regionally extensive Lyon Mountain Granite Gneiss, abbreviated “LMG”) spread by penetrative migration as semiconcordant alkali feldspar granite sheets subparallel to S2 into the previously deformed lithologies. The LMG crystallized at approximately 1.15 to 1.14 Ga and displays synkinematic F2 folds thus constraining the time of D2 deformation. Exhumation of the Marcy anorthosite began during D3 along a mylonitic extensional detachment, as a type of core complex. Protracted D3 produced F3 folds exhibited in regional domes and basins, such as the Hammondville antiform, reactivation of the S2 foliation, partial melting, metamorphism, metasomatism, iron ore remobilization, and intrusion of magnetite-bearing pegmatite both as layer-parallel sills and crosscutting dikes. D4 created NE- and NW-trending boudinage, local high-grade ductile shear zones, and crosscutting granitic pegmatite dikes. Kilometer (km)-scale lineaments readily observed in lidar data are Ediacaran mafic dikes and Phanerozoic brittle faults. Lower Paleozoic rocks are part of the Early Cambrian to Late Ordovician great American carbonate bank on the ancient margin of Laurentia. The Potsdam Sandstone preserves the Cambrian stratigraphy in outliers above the Great Unconformity. The Paleozoic rocks are weakly folded and block faulted. Parts of the quadrangle are covered by undifferentiated glacial deposits, but much of the quadrangle contains only a variably thick, veneer of unmapped glacial till over significant areas of exposed bedrock. The map also shows waste rock piles and locations of historical mining operations. This study was undertaken to improve our understanding of the bedrock geology in the Adirondack Highlands, establish a modern framework for 1:24,000-scale bedrock geologic mapping in the Adirondack Mountains, and provide a modern context for historical mines. This Scientific Investigations Map of the Eagle Lake 7.5-minute quadrangle consists of a map sheet, an explanatory pamphlet, and a geographic information system database that includes bedrock geologic units, faults, outcrops, and structural geologic information. The map sheet includes a bedrock geologic map, a correlation of map units, a description of map units, an explanation of map symbols, and two cross sections. The explanatory pamphlet includes a discussion of the geology.

New York↗
USGS2026

Discrete element investigation of the influence of shallow soil density on the manifestations of strike-slip surface fault rupture

This study investigates the influence of soil relative density on strike-slip surface fault rupture manifestations using three-dimensional numerical simulations performed with the discrete element method (DEM). The simulations capture the formation of distinctive fault strands within complex flower structures using tens of millions of grains. The tendency for dense soils to localize shear manifests as multiple localized shear bands within wide zones of deformation in strike-slip fault rupture, whereas diffuse shear deformation develops within narrow zones in loose soils. The spatial extents of soil deformation are consistent between simulations having similar relative densities but with different quantities of grains. However, individual shears are more distinguishable in assemblages of finer grains than in assemblages of coarser grains. The simulations show the progressive development of new shears within the bounds of previously developed shears. Shear activity transitions inward as fault activity diminishes along the outermost shears and continues along newly developed shears until a vertically dipping throughgoing shear structure develops that accommodates most of the fault displacement thereon. The throughgoing fault develops at smaller fault displacements in looser soils because the first shear rupture propagates closer to the vertical direction and does not undergo as much inward translation of shear activity, as is observed in denser soils. In all simulations, ground surface uplift develops between nonintersecting active shears, and ground surface subsidence tends to develop where new shears intersect previous shears. The surface traces in these simulations are shown to be consistent with analog models and case histories of surface fault rupture occurring in different shallow subsurface materials. Although computationally costly, these modeling results are valuable for providing a strong numerical supplement to traditional analog models used to represent the mechanics of strike-slip zones in soil, and they provide quantifiable stresses and large-strain deformations throughout the model domain.

Journal of Geotechnical and Geoenvironmental Engin↗
USGS2024

Will there be water? Climate change, housing needs, and future water demand in California

Climate change in California is expected to alter future water availability, impacting water supplies needed to support future housing growth and agriculture demand. In groundwater-dependent regions like California's Central Coast, new land-use related water demand and decreasing recharge is already stressing depleted groundwater basins. We developed a spatially explicit state-and-transition simulation model that integrates climate, land-use change, water demand, and groundwater gain-loss to examine the impact of future climate and land use change on groundwater balance and water demand in five counties along the Central Coast from 2010 to 2060. The model incorporated downscaled groundwater recharge projections based on a Warm/Wet and a Hot/Dry climate future from a spatially explicit hydrological process-based model. Two urbanization projections from a parcel-based, regional urban growth model representing 1) recent historical and 2) state-mandated housing growth projections were used as alternative spatial targets for future urban growth. Agricultural projections were based on recent historical trends from remote sensing data. Annual projected changes in groundwater balance were calculated as the difference between land-use related water demand, based on historical estimates, and climate-driven recharge plus agriculture return flows. Results indicate that future changes in climate-driven groundwater recharge, coupled with cumulative increases in agricultural water demand, result in overall declines in future groundwater balance, with a Hot/Dry future resulting in cumulative groundwater decline in all but Santa Cruz County. Cumulative declines by 2060 are especially prominent in San Luis Obispo (−2.9 to −5.1 Bm 3 ) and Monterey counties (−6.5 to −8.7 Bm 3 ), despite limited changes in agricultural water demand over the model period. These two counties show declining groundwater reserves in a Warm/Wet future as well, while San Benito and Santa Barbara County barely reach equilibrium. These results suggest future groundwater supplies may not be able to keep pace with regional demand and declining climate-driven recharge, resulting in a potential reduction in water security in the region. However, our county-scale projections showed new housing and associated water demand does not conflict with California's groundwater sustainability goals. Rather, future climate coupled with increasing agricultural groundwater demand may reduce water security in some counties, potentially limiting available groundwater supplies for new housing.

California↗
USGS2024

Groundwater-Surface water interactions research: Past trends and future directions

Interactions between groundwater and surface water sustain groundwater-dependent ecosystems and regulate river temperature and biogeochemical cycles, amongst many other processes. These interactions occur in freshwater environments including rivers, springs, lakes, and wetlands, and in coastal environments via tidal pumping, submarine groundwater discharge, and seawater intrusion. Here, we explore groundwater-surface water interactions research using bibliometric analyses of titles, abstracts, and keywords from 20,275 journal papers published between 1970 and 2023 extracted from Scopus. Analyses show that research into groundwater-surface water interactions is highly multi-disciplinary, with growing contributions from the social and biological sciences. The number of groundwater-surface water interactions papers is rapidly increasing with over 1200 papers published per year since 2020. Drawing on our data-driven approach and expert knowledge, we synthesise current research trends and identify critical future research directions. Despite the thousands of papers on groundwater-surface water interactions, important processes are still difficult to quantify or predict at meaningful spatial scales to inform water-resources management. We see benefits in future groundwater-surface water interactions research focusing on: (1) using new technologies including internet-of-things-based sensors, uncrewed vehicles, and remote-sensing approaches for data collection to inform groundwater-surface water interactions at large scales, (2) seeking approaches to upscale site-specific findings to better inform management, and (3) continuing the movement towards multi-disciplinary investigations to better inform the understanding of groundwater-surface water interactions and processes that will enable better management outcomes.

Journal of Hydrology↗
USGS2024

Diel temperature signals track seasonal shifts in localized groundwater contributions to headwater streamflow generation at network scale

Groundwater contributions to streamflow sustain aquatic ecosystem resilience; streams without significant groundwater inputs often have well-coupled air and water temperatures that degrade cold-water habitat during warm low flow periods. Widespread uncertainty in stream-groundwater connectivity across space and time has created disparate predictions of energy and nutrient fluxes across headwater networks, hindering predictions of cold-water habitat resilience under climate change scenarios. Recently, annual paired air and water temperature signals have been harnessed to indicate stream water thermal sensitivity and the dominance of deep versus shallow groundwater influence, although the utility of diel air–water temperature signal metrics for hydrologic inference has remained unexplored. Here we analyzed two consecutive years of locally paired, air–water temperature data from 47 headwater stream sites in the Catskill Mountains, New York, USA, and discovered characteristic seasonal patterns in diel temperature signal sinusoid metrics (amplitude ratio, phase lag, and mean ratio) driven by shifts in streamflow generation mechanisms and stream network position. Hydrologic interpretations of observed patterns were supported by stream heat budget model scenarios and additional analysis of paired air–water temperature data from two streams in Shenandoah National Park, Virginia, USA, with well characterized stream-groundwater connectivity. We found that within smaller tributaries, streamflow generation transitions from runoff to groundwater dominance were driven by hillslope drying during seasonal periods of lower precipitation. This was evidenced by significant correlations (p < 0.01) between daily water:air temperature signal amplitudes (non-linear decreases of ∼ 50 %) and derived base-flow index at 22 of the 28 sites, indicating enhanced local groundwater influence on streamflow promotes decoupling of diel air–water temperature signals. Additionally, ratios between daily water:air temperature signal means were lower in tributaries (∼0.68) when compared to main-stem (∼0.8) sites, increasing linearly throughout the observational period. In conceptual stream heat budget models, groundwater inflow had minimal effects on daily phase lags (∼0.2 hr), but increases in fractional groundwater discharge (0–50 %) depressed daily amplitude (∼20 % to 50 %) and mean ratios (∼15 %), supporting the sensitivity of daily metrics to interpreted changes in seasonal groundwater contributions to streamflow. During observational periods (i.e., April through October 2021 and 2022), significant differences (p < 0.01) between tributary and main-stem air–water metrics occurred when base-flow contributions were highest (∼0.93 vs. ∼ 0.68), as sites lower in the network had daily temperature metrics dominated by stream channel thermal inertia, rather than local groundwater connectivity, showing enhanced air–water diel signal coupling during warmer, drier periods. Divergent air temperature coupling across the network was interpreted as being driven by distance from local groundwater source zones, additional lateral groundwater inflows do not contribute a meaningful fraction to channel discharge lower in the network. Given the growing footprint of stream temperature observations, diel air–water temperature signals can provide distributed metrics sensitive to upstream groundwater discharge. Consequently, these metrics can support ongoing efforts by resource managers and researchers seeking to forecast the resilience of cold-water habitat to climate warming and changing precipitation regimes in mountain headwater streams.

New York, Virginia↗
USGS2024

Hydrogeologic framework and extent of saltwater intrusion in Kings, Queens, and Nassau Counties, Long Island, New York

In 2016, the U.S. Geological Survey began a multiyear cooperative study with the New York State Department of Environmental Conservation to evaluate the sustainability of Long Island’s sole-source aquifer system through hydrogeologic mapping, compilation of groundwater chloride concentrations, and groundwater flow modeling. In the initial phase of the islandwide study, the hydrogeologic framework and extent of saltwater intrusion in aquifers in Kings, Queens, and Nassau Counties on western Long Island, N.Y., were investigated. The aquifer system underlying western Long Island has been under stress from pumping of public, irrigation (golf course), and industrial supply wells. Saltwater intrusion has occurred from surrounding embayments (East River, Long Island Sound, Jamaica Bay, and the Atlantic Ocean) due to pumping. Eighteen boreholes were drilled and cores taken during 2019–21 to collect hydrogeologic, geochemical, and geophysical data to delineate the complex subsurface hydrogeology and extent of saltwater intrusion within the study area. Evaluation of the new cores, reexamination of legacy core descriptions, and analysis of borehole geophysical logs was used to refine the previously published hydrogeologic framework of Pleistocene and Cretaceous unconsolidated sediments in the area, including delineation of a previously undefined hydrogeologic unit between the Magothy aquifer and the Raritan confining unit, herein named the “upper Raritan aquifer.” The upper Raritan aquifer was first recognized in southeastern Nassau County from an analysis of about 50 closely spaced boreholes with high-resolution core descriptions and gamma-ray (gamma) logs. Further analysis of borehole logs across the study area indicated that the upper Raritan aquifer was also present in Kings and Queens Counties. Nuclear magnetic resonance (NMR) logging was used for the first time on Long Island to provide estimates of the hydraulic properties of the major aquifer and confining units. Unlike other geophysical logs that record responses to the rock matrix and fluid properties and are strongly dependent on mineralogy, NMR logs record responses to the presence of hydrogen protons in the formation fluid to determine water fraction and pore-size distribution. NMR log analysis provided estimates of the clay-bound, capillary-bound, and mobile water fractions and hydraulic conductivity of aquifers and confining units penetrated by five wells in Nassau County. Pumpage for public-supply and industrial wells on Long Island began in the 1870s with small, localized suppliers of populated areas in Kings and Queens Counties. By 1904–16, pumpage for public water supply in Kings County averaged 21 million gallons per day, and averaged 37 million gallons per day in Queens County, mostly from the upper glacial aquifer. Saltwater intrusion was reported as early as the beginning of the 20th century and included the upper glacial-Jameco-Magothy and Lloyd-North Shore aquifer systems. By 1936, pumping in central Kings County created a major cone of depression in the water table extending to the south shore of much of Kings County and into southwestern Queens County. Saltwater intrusion has caused the shutdown of public-supply wells in Kings, Queens, and Nassau Counties. A large saltwater intrusion wedge in the Lloyd aquifer was indicated in southern Queens County in the early part of the 20th century, and the saltwater interface may have been onshore predevelopment. Most of Kings and Queens Counties are intruded with saltwater in both the upper glacial-Jameco-Magothy and Lloyd-North Shore aquifers systems. Saltwater increased during the 20th century and continues to increase to the present (2023) in the Lloyd-North Shore aquifer system in Great Neck and Manhasset Neck in northern Nassau County. A major wedge of saltwater intrusion in the upper glacial-Jameco-Magothy aquifer in southwestern Nassau County appears to be increasing.

New York↗
USGS2025

Global patterns of coseismic landslide runout mobility differ from aseismic landslide trends

Coseismic landslides significantly contribute to human and economic losses during and immediately following earthquakes, yet very little data on the runout of such landslides exist. While well-established behavior of aseismic (e.g., hydrologically triggered) landslide runout mobility suggests strong correlation between landslide size and mobility, limited studies of coseismic landslide runout find conflicting mobility trends. We present a global dataset of runout lengths produced from a new automated method for estimating landslide runout, developed and validated using 1726 manually mapped landslides from five unique earthquakes. We then apply the automated runout tool to 23 global earthquake-induced landslide inventories, producing a compiled database of 73,665 measured and estimated runout lengths of coseismic landslides to assess mobility trends. We find a significant divergence between well-established aseismic mobility trends and that of coseismic landslides, with far greater scatter and more complex mobility patterns in earthquake-triggered landslides. As a function of landslide size, we observe global coseismic landslide mobility patterns are bilinear, becoming increasingly less mobile with increasing size above some threshold. This discordance between aseismic and coseismic landslide mobility may be a function of landslide type, kinematics, hydrology, and or setting that systematically differ between triggering mechanisms and should be explored in more depth to develop predictive models of these unique runout patterns. These results suggest hazard and risk models for coseismic landslides may significantly under-predict or over-predict impacts, depending on the size of triggered landslides.

Engineering Geology↗
USGS2025

Evidence for nonlocal sediment transport on hillslopes from fault scarp morphology

Hillslope sediment transport processes such as bioturbation, rainsplash, and granular mechanics occur across the entire planet. Yet, it remains uncertain how these small-scale processes act together to shape landscapes. Longstanding hillslope diffusion theory posits that hillslope processes are spatially limited, whereas new concepts of nonlocal sediment transport argue otherwise. However, each theory produces subtly different, but distinct, predictions for the evolution of fault scarps. We use the topographic change of fault scarps to demonstrate that hillslope processes produce nonlocal sediment transport. Analysis of a global compilation of 340 dated single-earthquake scarp profiles reveals a statistically significant ( p < 0.05 ) relationship between scarp age and scarp asymmetry, here defined as the ratio of imaginary to real components of the Fourier transform of absolute slope. Numerical simulations show that nonlocal models predict this relationship, whereas hillslope diffusion models do not. To further investigate this result, we examined the depositional geometry of a well-exposed colluvial wedge along the Wasatch fault in central Utah, United States. Our quantitative comparison between the exposure and numerical simulations reveals better agreement with the nonlocal model. Nonlocal sediment transport theory appears to best capture the physics of how hillslope processes shape fault scarps, yet hillslope diffusion provides a useful approximation in many cases. As the processes that act on fault scarps are nearly identical to those acting on hillslopes, our results provide evidence supporting nonlocality as a generalized model of hillslope sediment transport.

Utah↗
USGS2000

Storm impact scale for barrier islands

A new scale is proposed that categorizes impacts to natural barrier islands resulting from tropical and extra-tropical storms. The proposed scale is fundamentally different than existing storm-related scales in that the coupling between forcing processes and the geometry of the coast is explicitly included. Four regimes, representing different levels of impact, are defined. Within each regime, patterns and relative magnitudes of net erosion and accretion are argued to be unique. The borders between regimes represent thresholds defining where processes and magnitudes of impacts change dramatically. Impact level 1 is the 'swash' regime describing a storm where runup is confined to the foreshore. The foreshore typically erodes during the storm and recovers following the storm; hence, there is no net change. Impact level 2 is the 'collision' regime describing a storm where the wave runup exceeds the threshold of the base of the foredune ridge. Swash impacts the dune forcing net erosion. Impact level 3 is the 'overwash' regime describing a storm where wave runup overtops the berm or, if present, the foredune ridge. The associated net landward sand transport contributes to net migration of the barrier landward. Impact level 4 is the 'inundation' regime describing a storm where the storm surge is sufficient to completely and continuously submerge the barrier island. Sand undergoes net landward transport over the barrier island; limited evidence suggests the quantities and distance of transport are much greater than what occurs during the 'overwash' regime.

Journal of Coastal Research↗
USGS2025

Solution-collapse breccia pipe uranium deposits of the southern Colorado Plateau, northwestern Arizona, USA

Some of the highest-grade uranium deposits in the United States occur in breccia pipes that formed by solution and collapse of sedimentary strata, which occur in the southern portion of the Colorado Plateau in northwestern Arizona. The host breccia pipes are up to 1200 m in vertical extent, average about 90 m in diameter, and can cross-cut strata from their base in the Mississippian Redwall Limestone to as stratigraphically high on some plateaus as the Triassic Chinle Formation. These uranium-base metal deposits are up to 600 m thick and formed within the breccia pipes where they transect the Permian Coconino Sandstone, Hermit Formation, and the Esplanade Sandstone. Of the hundreds of breccia pipes identified across this region, only a small percentage are known to contain mineralization. The main uranium ore mineral is uraninite that is intergrown with at least 20 base-metal sulfide minerals, which contribute Fe, Cu, Co, As, Pb, Zn, Ni, and Ag to the deposits. This study considered regional stratigraphy, sulfur isotope systematics, mineralogy, in situ dating, and compilation and analysis of previous work on the deposits. A comprehensive deposit model has not been published for these deposits. This analysis identified new additions to update the deposit model for these unusual, possibly unique deposits. Proposed modifications to the model include: (1) the source, mechanisms, timing of the base-metal sulfide mineral assemblages, and (2) the source, mechanism, and timing of the uranium mineralization. Sulfide and uranium deposition are shown to be separate mineralization events. The study proposes the possible role of gypsum as a source of sulfur for the sulfide minerals in the deposits. Groundwaters carrying uranium encountered the preexisting sulfides in breccia pipes, reducing the uranyl ions, and precipitating U oxide (as uraninite). Analysis of the regional stratigraphy recognized that numerous beds of gypsum are in the strata that lie only tens of meters above the breccia pipe deposits. In the breccia pipe region, if these stratigraphic units (Toroweap and Kaibab Formations) do not contain gypsum layers then the underlying pipes are not mineralized; where these Permian gypsum layers do occur, breccia pipes can host mineralization. This new understanding should be useful in identifying the prospective region for mineralized pipes.

Arizona↗
USGS2026

Assessing future hydrologic extremes using an integrated hydrology and river operations model in the Russian River watershed

Study region The Russian River watershed, situated in coastal, northern California, experiences hydrologic extremes, including periodic droughts and flooding. Water managers are working to maintain sustainable water supplies and environmental flows, while mitigating flood risks. Study focus This paper introduces an integrated hydrology and river operations model for the Russian River watershed. This model is distinct from models in previous studies because it represents surface-groundwater interactions and uses climate forcings to estimate dynamic water use demands that are superimposed onto both reservoir operations and water supply constraints. The model was used to examine three historical (1990–2015) and eight future (2016–2099) water use and climate change scenarios. New hydrological insights for the region The direct connection between streams and aquifers facilitated both annual aquifer replenishment by high winter streamflows and streamflow depletion by groundwater wells (19 % of pumped groundwater in alluvial aquifers from stream leakage) during critical low flow periods. Simulated streamflow changes included 59 % longer and 54 % more severe streamflow droughts, 26 % lower seasonal low streamflows, and up to 125 % higher peak streamflows, averaged over future climate and water use scenarios, suggesting increased future flood and water availability risks. Results showed the importance of reservoir operations for mitigating the impacts of increased hydroclimatic volatility, despite a decrease in reservoir reliability at Lake Mendocino, suggesting that reservoir management may be used to decrease future risks.

California↗
USGS2025

Review: The hydrogeology of critical mineral resources relevant to the energy transition

Attaining the goals of the international treaty on climate change (the Paris Agreement) will greatly increase the demand for the critical minerals required to implement clean-energy technologies. This poses both challenges and opportunities to the hydrogeologic community from several perspectives. Here, important insights that the hydrogeological sciences have to offer for mineral exploration, mineral production, and addressing environmental issues related to mining and mine decommissioning are summarized. This study focuses on copper, cobalt, lithium, and rare earths to represent the broad spectrum of critical minerals and illustrate their relevance by referring to projected demands and production rates. The current understanding of the hydrogeologic processes that form major deposits of these minerals are then summarized. Ore is defined as the naturally occurring material from which minerals of economic value can be extracted, where most ore deposits are the products of complex hydrogeologic couplings between fluid flow, heat transport, solute transport, chemical reactions, and mechanical deformation. Exploration models for the discovery of deeper, hidden deposits are potentially informed by hydrogeologic theory and hydrogeochemical processes. Hydrogeologic understanding and methods are also essential to production and recovery. Longstanding challenges are mine dewatering and (conversely) mine water supply, as well as mineral-extraction practices such as spoil heap leaching and in situ mining. New challenges arise from element extraction from subsurface brines. Finally, the quantity of water use and potential environmental impacts of mining on water quality are at the core of ‘social license’: the approval and acceptance of society to mining activities.

Hydrogeology Journal↗
USGS2026

Geochemical disequilibrium at the brittle-ductile transition

We investigate the microtextural, microchemical, and isotopic effects of late-stage ductile deformation in quartzite mylonites and kyanite–muscovite–quartz veins from the Raft River shear zone (Utah). Quartz microstructures record pervasive disequilibrium, expressed by unannealed features including undulatory extinction, deformation lamellae, and poorly defined fabrics, typical of waning deformation in shear zones. Microchemical disequilibrium is best preserved in kyanite quartzites, where CL-zoned kyanite records repeated fractures, overgrowth, and mineral precipitation, and in muscovite from muscovite-poor quartzite mylonites that shows minor-element zoning consistent with syn-deformational overgrowth on detrital cores. In contrast, muscovite from muscovite-rich kyanite quartzites exhibits minimal chemical zoning. These microchemical variations correlate with 40 Ar/ 39 Ar age systematics. Chemically zoned muscovite preserves variable single-step ages, including ∼150 Ma ages, reflecting retention of detrital cores. In contrast, syndeformational muscovite consistently yields Miocene ages, indicating recrystallization and new growth below argon closure temperatures that reset inherited isotopic signatures. Similar trends are observed in quartzite mylonites, where increasing quartz recrystallization and stronger crystallographic preferred orientations occur toward deeper structural levels. Together, these observations indicate increasing retrograde deformation and recrystallization with depth in the Raft River shear zone and demonstrate that strain-driven recrystallization exerts a first-order control on muscovite ages. We suggest that apparent thermochronologic gradients in retrograde shear zones may reflect recrystallization gradients rather than temperature gradients. Where cooling limits the thermal driving force for recrystallization, isotopic relics are preserved, and local deformation and fluid availability control re-equilibration. Consequently, isotopic disequilibrium—particularly in the 40 Ar/ 39 Ar system—may be the rule rather than the exception of retrograde tectonic environments.

Idaho, Utah↗
USGS2025

Using subducting plate motion to constrain Cascadia slab geometry and interface strength

Subduction zones are home to multiple geohazards driven by the evolution of the regional tectonics, including earthquakes, volcanic eruptions and landslides. Past evolution builds the present-day structure of the margin, while the present-day configuration of the system determines the state-of-stress in which individual hazardous events manifest. Regional simulations of subduction zones provide a tool to synthesize the tectonic history of a region and investigate how geologic features lead to variations in the state of stress across the subduction system. However, it is challenging to design regional models that provide a force-balance that is consistent with the large-scale motion of surrounding tectonic plates while also not over-constraining the solution. Here, we present new models for the Cascadia subduction zone that meet these criteria and demonstrate how the motion of the subducting Juan de Fuca plate can be used to determine the along-strike variations in the viscous (long-term) coupling across the plate boundary. All successful models require lower viscous coupling in the northern section of the trench compared to the central and southern sections. However, due to uncertainties in the geometry of the Cascadia slab, we find that there is a trade-off between along-strike variation in viscous coupling and slab shape. Better constraints on the slab shape, and/or use of other observations are needed to resolve this trade-off. The approach presented here provides a framework for further exploring how geologic features in the overriding plate and the properties of the plate boundary region affect the state-of-stress across this and other subduction zones.

Cascadia subduction zone↗
USGS2025

Applying U-Th disequilbrium for dating siliceous sinters

Continental hydrothermal systems are critical avenues for the crustal transport of heat and mass captured for geothermal energy and mineral exploration. Thus, understanding their temporal evolution and longevity is important for resource characterization. Deposits of microlaminated siliceous sinter, common surface expressions of high temperature reservoirs (> 170 °C), have the potential to trace hydrothermal histories. Geothermal reservoirs are often located within uranium-bearing silicic volcanic rock where subsurface fluid-rock interactions extract U into hydrothermal fluids. U incorporated in the surface sinter deposit has the potential to provide a U— Th disequilibrium dating option. We focus on samples from El Tatio geyser field in the Altiplano of northern Chile, the largest geothermal system in the Andes. Our resulting 230 Th/U ages, along with the water and deposit elemental compositions, suggest concentrations of U and Th vary predictably along the sinter apron. While distal facies containing the highest U concentrations (> 50 μg/g) are least affected by detrital Th corrections, they can display suspected open-system behavior. In contrast, more medial facies, where bacterial mats and other porous textures are co mmonly concentrated, have only trace amounts of U (< 0.1 μg/g), which leads to unreliable or geologically improbable dates. Proximal facies tend to date most consistently. By comparing existing 14 C ages with 230 Th/U results, 230 Th/U ages tend to be younger than the 14 C ages, supporting the presence of a 14 C-dead carbon influence. New data confirm that the onset of geothermal activity at El Tatio goes back to the late Pleistocene.

Altiplano, El Tatio geyser field↗