Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Mining Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources
USGS1951

Antimony ore in the Fairbanks district, Alaska

Antimony-bearing ores in the Fairbanks district, Alaska, are found principally in two areas, the extremities of which are at points 10 miles west and 23 miles northeast of Fairbanks; and one of two minor areas lies along this same trend 30 miles farther to the northeast. These areas are probably only local manifestations of mineralization that affected a much broader area and formed antimony-bearing deposits in neighboring districts, the closest of which is 50 miles away. The ores were exposed largely as a result of lode gold mining, but at two periods in the past, high prices for antimony ore warranted an independent production and about 2500 tons of stibnite ore was shipped. The sulfide deposits occupy the same fractures along which a gold-quartz mineralization of greater economic importance occurred; and both are probably genetically related to igneous rocks which intrude the schistose country rock. The sulfide is in part contemporaneous with some late-stage quartz in which it occurs as disseminated crystals; and in part the latest filling in the mineralized zones where it forms kidney-shaped masses of essentially solid sulfide. One extremely long mass must have contained nearly 100 tons of ore, but the average of the larger kidneys is closer to several tons. Much of the ore is stibnite, with quartz as a minor impurity, and assays show the tenor to vary from 40 to 65 percent antimony. Sulphantimonites are less abundant but likewise occur as disseminated crystals and as kidney-shaped bodies. Antimony oxides appear on the weathered surface and along fractures within the sulfide ore. Deposits containing either stibnite or sulphantimonite are known at more than 50 localities, but only eighteen have produced ore and the bulk of this came from the mines. The geology of the deposit, and the nature, extent, and period of the workings are covered in the detailed descriptions of individual occurrences. Several geologic and economic factors, which greatly affect prospecting and mining for stibnite ore in the area, are outlined. The principal available ore and reserves are considered to be ores earlier mined but never shipped, ore minable from near-surface deposits, and ores recoverable as a by-product of future gold mining. The outlook for stibnite production in the district is very uncertain. Apparently the greater portion of stibnite ore has already been recovered and present operations will strip the two principal areas of the district. This conclusion is based on the scanty discoveries since the last war and the fact that the areas are so pock-marked with prospects that there is little likelihood that any other large near-surface bodies remain to be discovered. Future prospecting would essentially be limited to attempts to seek the continuation of lodes previously having high yields of stibnite.

Open-File Report↗
USGS1967

Locations and descriptions of lode mines and prospects in the Fairbanks district, Alaska

This report has been compiled from data gathered in the field in September and October, 1966, and from a detailed survey of the various geologic and mining reports on the Fairbanks lode mining district. A number of people who are familiar with mining in this district have provided some additional information, and their help is gratefully acknowledged. The map (fig. 1) and table 1 give an essentially complete coverage of the locations and pertinent geologic data for all lode mines and prospects in this district. Analyses of 101 samples, collected on a reconnaissance basis from dump material and exposures that are available around some of the mines and prospects and from several igneous rock bodies that are closely related to the lode deposits, are given in table 2. The analyses provide data for a preliminary evaluation of the geochemical characteristics of the deposits and the rocks to which they are presumably genetically related, and may be helpful background information for future detailed geologic studies and exploration. The metal contents that are shown in table 2 have not been incorporated in table 1.

Alaska↗
USGS2011

The U.S. Geological Survey's gravity program in California

Since the 1963 gravity symposium, the U.S. Geological Survey has entered into a cooperative program with the California Division of Mines and Geology, the Army Map Service, and several universities for the purpose of completing a 5-mgal Bouguer gravity map of the entire State of California at a scale of 1:250,000 by 1970. The areal division of responsibility within the program is shown on a map of California by Chapman (p. 542). It is evident from a plot of existing stations that considerably more data are required in the eastern Mojave Desert located in the southeastern corner of the state, and in the Sierra Nevada north of Lake Tahoe. Additional fill-in work is needed in nearly all parts of the state. The data requirements vary for a 5-mgal contour map depending on the local complexity of the gravity field; but in general, we are obtaining gravity stations at an interval of about 3 km along roads, trails, and rivers, and 5 to 8 km between these access routes by cross-country jeep, horseback, or helicopter if necessary. About 6000 new stations were obtained in California by the Geological Survey during 1968 and we expect to obtain about 3000 more in 1969.

California↗
USGS2009

Mineral-resource assessment of northern Nye County, Nevada— A progress report

The U.S. Geological Survey (USGS), University of Nevada, Las Vegas (UNLV), and Nevada Bureau of Mines and Geology (NBMG), which is a part of the University of Nevada, Reno (UNR), have completed the first year of data collection and analysis in preparation for a new mineral- and energy-resource assessment of northern Nye County, Nevada. This report provides information about work completed before October 1, 2009. Existing data are being compiled, including geology, geochemistry, geophysics, and mineral-deposit information. Field studies are underway, which are primarily designed to address issues raised during the review of existing information. In addition, new geochemical studies are in progress, including reanalyzing existing stream-sediment samples with modern methods, and analyzing metalliferous black shales.

Nevada↗
USGS2012

Summary of the diamond resource potential and production capacity assessment of Guinea

In May of 2000, a meeting was convened in Kimberley, South Africa, by representatives of the diamond industry and leaders of African governments to develop a certification process intended to assure that export shipments of rough diamonds were free of conflict concerns. Outcomes of the meeting were formally supported later in December of 2000 by the United Nations in a resolution adopted by the General Assembly. By 2002, the Kimberley Process Certification Scheme (KPCS) was ratified and signed by diamond-producing and diamond-importing countries. As of August 2012, the Kimberley Process (KP) had 51 participants representing 77 countries. With the passing of the AD, the Plenary agreed that further efforts should be made to assess Guinea's diamond production capacity. In support of this objective, the U.S. Geological Survey (USGS) partnered with the Kimberley Process Working Group of Diamond Experts (WGDE) and Guinea's Ministry of Mines and Geology (MMG) to conduct a field campaign in Guinea from April 24 through May 2, 2010. The field team was composed of Mark Van Bockstael of the WGDE, Peter Chirico of the USGS, and several geologists from the MMG. The team visited diamond mining sites in western Guinea's Kindia, Forècariah, Coyah, and Tèlimèlè Prefectures, in which the Guinean government identified newly discovered deposits mined by artisans. Several mining sites within the Kissidougou Prefecture in southeastern Guinea were also visited as part of this study. Geologic and geomorphic information on the diamond deposits was collected at each site. The fieldwork conducted during this trip served as a means of acquiring critical data needed to conduct a full assessment of diamond resources and production capacity.

Fact Sheet↗
USGS1990

Synthetic seismogram analysis of locally-recorded mine tremors

The fitting of synthetic seismograms to locally-recorded, broad-band, wide dynamic range seismic data is a very effective means of determining both seismic source parameters and focal mechanisms of mine tremors. Using data from a single three-component surface station, in conjunction with a seismic location network, a comprehensive description of the seismic source process can be obtained by the trial and error calculation of synthetic seismograms, for a point source in a homogeneous half-space, until the ground motion observed at the surface is matched. This methodology was applied to two tremors located in the Vaal Reefs Gold Mine, near Klerksdorp, South Africa, and was used to relate these events to the geological and mining situation in the environs of each hypocenter.

Klerksdorp↗
USGS2014

Salinity of the lower Savannah River in relation to stream‐flow and tidal action

In order to obtain information needed in planning for industrial development along the Savannah River and in the city of Savannah, Georgia, a study of the salinity of the Savannah River was undertaken by the Geological Survey, United States Department of the Interior, in cooperation with the Georgia Division of Mines, Mining, and Geology. The Works Progress Administration of Georgia and the city of Savannah also cooperated in the study. The Savannah River lies on the boundary between the States of Georgia and South Carolina. The River proper from the mouth to the junction of the Tugaloo and Senaca rivers is 314 miles in length. The area of its watershed is about 10,579 square miles, of which 9,850 square miles are above the stream‐flow gaging‐station near Clyo, Georgia. The River is tidal for about 50 miles above its mouth. The average streamflow for the Savannah River near Clyo, Georgia, was 10,410 and 10,820 second‐feet, respectively, for the years ending September 30, 1938 and 1939. The city of Savannah, Georgia, located on the Savannah River 17 miles above its mouth, is an important seaport and industrial center. The lower Savannah River near the city of Savannah is shown in Figure 1.

Georgia, South Carolina↗
USGS1952

Compilation of data on the uranium and equivalent uranium content of samples analyzed by U.S. Geological Survey during a program of sampling mine, mill, and smelter products

In 1942 the Geological Survey began to collect, in response to a request made by the War Production Board, samples of mine, mill, and smelter products. About 1,400 such samples were collected and analyzed spectrographically for about 20 elements that were of strategic importance, in order to determine whether any of the products analyzed might be possible sources of some of the needed elements. When attention was directed to radioactive elements in 1943, most of the samples were scanned for radioactivity. Part of the work was done on behalf of the Division of Raw Materials of the Atomic Energy Commission. The sources, mine mill, smelter, or prospect, from which these samples were collected, the kind of material sampled, i.e. ores, concentrates, middlings, tailings, flue dusts, and so forth, and the radioactivity of the samples are listed in this report. Samples of the materials collected in the course of the Geological Survey’s investigations for uranium are excluded, but about 500 such samples were analyzed spectrographically for some or all of the same 20 elements sought in the samples that are the subject of this report. Most of the samples were tested only for their radioactivity, but a few were analyzed chemically for uranium. The radioactivity of many of the samples tested in the early screening was determined only qualitatively. Several samples were tested at one time, and if the count obtained did not exceed a predetermined minimum above background, the samples were not tested individually. If the count was more than this minimum, the samples were tested individually to identify the radioactive sample or samples and to obtain a quantitative value for the radioactivity. In general, the rough screening served as a basis for separating samples in which the radioactivity amount to less than 0.003 percent equivalent uranium from those in which it exceeded that amount. Some aspects of various phases of the investigation of radioactivity in these samples have been reported in various other reports, as follows.

Trace Elements Investigations↗
USGS2013

The influence of geomorphology on the role of women at artisanal and small-scale mine sites

The geologic and geomorphic expressions of a mineral deposit determine its location, size, and accessibility, characteristics which in turn greatly influence the success of artisans mining the deposit. Despite this critical information, which can be garnered through studying the surficial physical expression of a deposit, the geologic and geomorphic sciences have been largely overlooked in artisanal mining-related research. This study demonstrates that a correlation exists between the roles of female miners at artisanal diamond and gold mining sites in western and central Africa and the physical expression of the deposits. Typically, women perform ore processing and ancillary roles at mine sites. On occasion, however, women participate in the extraction process itself. Women were found to participate in the extraction of ore only when a deposit had a thin overburden layer, thus rendering the mineralized ore more accessible. When deposits required a significant degree of manual labour to access the ore due to thick overburden layers, women were typically relegated to other roles. The identification of this link encourages the establishment of an alternative research avenue in which the physical and social sciences merge to better inform policymakers, so that the most appropriate artisanal mining assistance programs can be developed and implemented.

Natural Resources Forum↗
USGS1964

Geology applied to study of coal mine bumps and mining methods at Sunnyside, Utah

Coal mine bumps are a serious hazard to life and property in the mines of east-central Utah. Research into geologic factors associated with these bumps indicates that the bumps are spatially and genetically related to structural and stratigraphic features. Some bumps are directly related to stress accumulation along faults, either from natural causes or as a result of mining. Frictional properties of bedding planes between coal and roof rock, and between some rock units within the roof, directly affect the deformation of coal ribs, and hence the incidence of bumps. These frictional properties are related to the lithology of the roof rocks as well as to the sedimentary structures within the rocks. Commonly a sequence consisting of 1- 3 ft of carbonaceous siltstone, about 2- 3 ft of rider coal, and several feet of massive siltstone or sandstone overlies the main seam. The sequence causes difficult roof conditions in the mines, difficult mining conditions, and directly or indirectly many bumps.

Utah↗
USGS2006

U.S. Geological Survey and Afghanistan Ministry of Mines and Industry cooperative assessment of Afghanistan's undiscovered oil and gas

Results of the U.S. Geological Survey and Afghanistan Ministry of Mines and Industry cooperative assessment of undiscovered petroleum resources of northern Afghanistan were first released through this presentation on March 14, 2006, at the Afghan Embassy in Washington, D.C. On March 15 the results were presented in Kabul, Afghanistan. The purpose of the assessment and release of the results is to provide energy data required to implement the rebuilding and development of Afghanistan's energy infrastructure. This presentation includes a summary of the goals, process, methodology, results, and accomplishments of the assessment. It provides context for Fact Sheet 2006-3031, a summary of assessment results provided in the presentations.

Open-File Report↗
USGS2000

Synthetic Precipitation Leaching Procedure (SPLP) leachate chemistry data for solid mine-waste composite samples from southwestern New Mexico, and Leadville, Colorado

This report details chemistry data derived from leaching of mine-waste composite samples using a modification of E.P.A. Method 1312, Synthetic Precipitation Leaching Procedure (SPLP). In 1998, members of the U.S. Geological Survey Mine Waste Characterization Project collected four mine-waste composite samples from mining districts in southwestern New Mexico (CAR and PET) and near Leadville, Colorado (TUC and MII). Resulting leachate pH values for the four composites ranged from 5.45 to 8.84 and ranked in the following order: CAR < TUC < MII < PET. Specific conductivity values ranged from 85 uS/cm to 847 uS/cm in the following order: PET < MII < CAR < TUC. Geochemical data generated from this investigation reveal that leachate from the CAR composite contains the highest concentrations of Pb, Zn, Ni, Mn, Cu, Cd, and Al

Open-File Report↗
USGS2000

Discrepancy between earthquake rates implied by historic earthquakes and a consensus geologic source model for California

We examine the difference between expected earthquake rates inferred from the historical earthquake catalog and the geologic data that was used to develop the consensus seismic source characterization for the state of California [California Department of Conservation, Division of Mines and Geology (CDMG) and U.S. Geological Survey (USGS) Petersen et al., 1996; Frankel et al., 1996]. On average the historic earthquake catalog and the seismic source model both indicate about one M 6 or greater earthquake per year in the state of California. However, the overall earthquake rates of earthquakes with magnitudes (M) between 6 and 7 in this seismic source model are higher, by at least a factor of 2, than the mean historic earthquake rates for both southern and northern California. The earthquake rate discrepancy results from a seismic source model that includes earthquakes with characteristic (maximum) magnitudes that are primarily between M 6.4 and 7.1. Many of these faults are interpreted to accommodate high strain rates from geologic and geodetic data but have not ruptured in large earthquakes during historic time. Our sensitivity study indicates that the rate differences between magnitudes 6 and 7 can be reduced by adjusting the magnitude-frequency distribution of the source model to reflect more characteristic behavior, by decreasing the moment rate available for seismogenic slip along faults, by increasing the maximum magnitude of the earthquake on a fault, or by decreasing the maximum magnitude of the background seismicity. However, no single parameter can be adjusted, consistent with scientific consensus, to eliminate the earthquake rate discrepancy. Applying a combination of these parametric adjustments yields an alternative earthquake source model that is more compatible with the historic data. The 475-year return period hazard for peak ground and 1-sec spectral acceleration resulting from this alternative source model differs from the hazard resulting from the standard CDMG-USGS model by less than 10% across most of California but is higher (generally about 10% to 30%) within 20 km from some faults.

Bulletin of the Seismological Society of America↗
USGS2000

Update and revisions for Open-File Report 98-624, synthetic precipitation leaching procedure (SPLP) leachate chemistry data for solid mine-waste composite samples from the Silverton and Leadville districts in Colorado

This report supersedes, revises, and updates information and data previously released in Open-File Report 98-624 (Montour and others, 1998). Data for this report were derived from leaching of mine-waste composite samples using a modification of E.P. A. Method 1312, Synthetic Precipitation Leaching Procedure (SPLP). In 1997, members of the U.S. Geological Survey Mine Waste Characterization Project collected four mine-waste composite samples from mining districts near Silverton, Colorado (MAY and YUK), and near Leadville, Colorado (VEN and SUN). This report presents analytical results from these sites.

Open-File Report↗