Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Marine Structures”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources
USGS2016

Detrital zircon geochronology of pre- and syncollisional strata, Acadian orogen, Maine Appalachians

The Central Maine Basin is the largest expanse of deep-marine, Upper Ordovician to Devonian metasedimentary rocks in the New England Appalachians, and is a key to the tectonics of the Acadian Orogeny. Detrital zircon ages are reported from two groups of strata: (1) the Quimby, Rangeley, Perry Mountain and Smalls Falls Formations, which were derived from inboard, northwesterly sources and are supposedly older; and (2) the Madrid, Carrabassett and Littleton Formations, which were derived from outboard, easterly sources and are supposedly younger. Deep-water deposition prevailed throughout, with the provenance shift inferred to mark the onset of foredeep deposition and orogeny. The detrital zircon age distribution of a composite of the inboard-derived units shows maxima at 988 and 429 Ma; a composite from the outboard-derived units shows maxima at 1324, 1141, 957, 628, and 437 Ma. The inboard-derived units have a greater proportion of zircons between 450 and 400 Ma. Three samples from the inboard-derived group have youngest age maxima that are significantly younger than the nominal depositional ages. The outboard-derived group does not share this problem. These results are consistent with the hypothesised provenance shift, but they signal potential problems with the established stratigraphy, structure, and (or) regional mapping. Shallow-marine deposits of the Silurian to Devonian Ripogenus Formation, from northwest of the Central Maine Basin, yielded detrital zircons featuring a single age maximum at 441 Ma. These zircons were likely derived from a nearby magmatic arc now concealed by younger strata. Detrital zircons from the Tarratine Formation, part of the Acadian foreland-basin succession in this strike belt, shows age maxima at 1615, 980 and 429 Ma. These results are consistent with three episodes of zircon recycling beginning with the deposition of inboard-derived strata of the Central Maine Basin, which were shed from post-Taconic highlands located to the northwest. Next, southeasterly parts of this succession were deformed in the Acadian orogeny, shedding detritus towards the northwest into what remained of the basin. Finally, by Pragian time, all strata in the Central Maine Basin had been deformed and detritus from this new source accumulated as the Tarratine Formation in a new incarnation of the foreland basin. Silurian-Devonian strata from the Central Maine Basin have similar detrital zircon age distributions to coeval rocks from the Arctic Alaska and Farewell terranes of Alaska and the Northwestern terrane of Svalbard. We suggest that these strata were derived from different segments of the 6500-km-long Appalachian-Caledonide orogen.

Maine, New Hampshire↗
USGS2011

Recent faulting in western Nevada revealed by multi-scale seismic reflection

The main goal of this study is to compare different reflection methods used to image subsurface structure within different physical environments in western Nevada. With all the methods employed, the primary goal is fault imaging for structural information toward geothermal exploration and seismic hazard estimation. We use seismic CHIRP (a swept-frequency marine acquisition system), weight drop (an accelerated hammer source), and two different vibroseis systems to characterize fault structure. We focused our efforts in the Reno metropolitan area and the area within and surrounding Pyramid Lake in northern Nevada. These different methods have provided valuable constraints on the fault geometry and activity, as well as associated fluid movement. These are critical in evaluating the potential for large earthquakes in these areas, and geothermal exploration possibilities near these structures.

Nevada↗
USGS1987

Formation of scalloped cross-bedding without unsteady flows

Scalloped cross-bedding --compound cross-bedding with internal bounding surfaces that cyclically scoop into the previously deposited foresets and into the sediment below the set--is a common and distinctive structure in eolian, fluvial, tidal, and nearshore-marine sands. Scalloped cross-bedding in shallow-marine deposits previously has been interpreted to be produced by cyclic flows, such as neap-spring tidal flows, which are known to cause cyclic fluctuations in the depth of scour in the troughs of migrating bedforms, but scalloped cross-bedding also originates by a process that does not require fluctuating flow: migration of small bedforms across the lee slopes or along the troughs of larger bedforms. Intersections of the troughs of the two sets of bedforms form topographically low scour pits, and cyclic passage of these scour pits through the outcrop plane--the plane that later becomes an outcrop surface--causes the lower-set boundary to rise and fall. Scalloped cross-bedding formed by fluctuating flow superficially resembles that formed by superimposed or intersecting bedforms, but, as illustrated in three-dimensional computer plots, the two kinds of structures commonly can be distinguished by directional properties of the bedding. Scallops deposited by alongslope-migrating, superimposed bedforms have cross-bed and bounding-surface dip patterns that lack bilateral symmetry and have cross-bed dips that are asymmetrically distributed relative to bounding-surface dips. Scallops with dip patterns that are bilaterally symmetrical and with cross-bed dips that are symmetrically distributed relative to the bounding-surface dips can be produced either by fluctuating flow or by downslope or upslope migration of superimposed bedforms. An example of nearshore-marine scalloped cross-bedding of Pleistocene age was examined in detail in a coastal terrace of Monterey Bay, California. The three-dimensional structure and directional properties of the bedding suggest that the deposit was produced by a series of small bedforms migrating offshore, down a rip channel that was bounded on one side by a migrating oblique bar.

Journal of Sedimentary Petrology↗
USGS2022

High-resolution marine seismic imaging of the Seattle fault zone: Near surface insights into fault zone geometry, Quaternary deformation, and long-term evolution

The Seattle fault zone (SFZ) is a north‐directed thrust fault system that underlies the greater Seattle metropolitan area. Evidence of past land level changes, landslides, liquefaction, and a local tsunami indicate that this 70‐km‐long fault system can host up to M 7–7.5 earthquakes. Both the geometry and earthquake recurrence of the SFZ are debated and surveys of the shallow subsurface have not yet been incorporated into deeper crustal‐scale structural interpretations, especially where the SFZ cuts across marine portions of the Puget Lowland. Here we use a new high‐resolution marine seismic reflection dataset to image fault‐related deformation in Quaternary sediments and Tertiary bedrock throughout Puget Sound and Lake Washington. We use this perspective of shallow geology as a link between existing crustal‐scale geophysical insights into fault geometry at depth and paleoseismological observations of faulting at the surface and propose a refined structural model for the SFZ. We interpret that our new seismic reflection data in the Rich Passage area of Puget Sound images evidence of an inactive, south‐dipping strand of the SFZ, which is overprinted by Quaternary folding and slip along north‐dipping backthrusts within the hanging wall of a blind, south‐dipping fault located 6 km farther north. To explain these results, we propose that the SFZ is a normal sequence fault propagation fold that has stepped northward through time, and we show the plausibility of this model through trishear forward modeling. Growth strata and faulting imaged in Quaternary sediments in Lake Washington and Rich Passage are consistent with the spatial distribution of folding and backthrusting that occurred during an M 7–7.5 earthquake in A.D. 900–930, corroborating existing evidence that the SFZ has been active throughout the Quaternary.

Bulletin of the Seismological Society of America↗
USGS1966

Eclogitic pyroxenes, ordered with P2 symmetry

X-ray diffraction crystal-structure analysis of omphacite from eclogite, Tiburon Peninsula, Marin County, California, shows that this clinopyroxene has P 2 symmetry with a nearly ordered distribution of the multiple cation content defined by its approximate formula: (Na 0.5 Ca 0.5 ) (Mg 0.4 Fe 2 + 0.1 Al 0.4 Fe 3 + 0.1 )Si 2 O 6 . Na+ and Ca 2+ tend to assume alternate locations in the structure, and (Mg,Fe 2+ ) octahedra alternate with Al 3+ or (Al,F 3+ ) octahedra in chains along c .

California↗
USGS2018

Restricted access Giant kelp, Macrocystis pyrifera, increases faunal diversity through physical engineering

Foundation species define the ecosystems they live in, but ecologists have often characterized dominant plants as foundational without supporting evidence. Giant kelp has long been considered a marine foundation species due to its complex structure and high productivity; however, there is little quantitative evidence to evaluate this. Here, we apply structural equation modelling to a 15-year time series of reef community data to evaluate how giant kelp affects the reef community. Although species richness was positively associated with giant kelp biomass, most direct paths did not involve giant kelp. Instead, the foundational qualities of giant kelp were driven mostly by indirect effects attributed to its dominant physical structure and associated engineering influence on the ecosystem, rather than by its use as food by invertebrates and fishes. Giant kelp structure has indirect effects because it shades out understorey algae that compete with sessile invertebrates. When released from competition, sessile species in turn increase the diversity of mobile predators. Sea urchin grazing effects could have been misinterpreted as kelp effects, because sea urchins can overgraze giant kelp, understorey algae and sessile invertebrates alike. Our results confirm the high diversity and biomass associated with kelp forests, but highlight how species interactions and habitat attributes can be misconstrued as direct consequences of a foundation species like giant kelp.

Proceedings of the Royal Society B↗
USGS2018

The role of fish in a globally changing food system

Applied research and adaptive management techniques can assist with the necessary evolution of sustainable food systems to include a stronger emphasis on fish and other aquatic organisms. Fish provide key macro‐ and micronutrients and protein, are low in saturated fat, and have been linked to a wide array of health benefits for the developing fetus, infants, and adults. Diet quality is not only important for reducing nutrient deficiency, but is now regarded as essential for preventing chronic diseases such as obesity, type 2 diabetes, hypertension, coronary artery disease, and cancers. Small‐scale aquaculture also contributes to poverty alleviation and promotes food and nutrition security in less developed parts of the world. Climate change and climate variability influence aquatic ecosystems and fish populations. Ocean acidification is most commonly cited as being detrimental to marine invertebrates and algae that build carbonate structures.

Book chapter↗
USGS2023

Climate change and pulse migration: Intermittent Chugach Inuit occupation of glacial fiords on the Kenai Coast, Alaska

For millennia, Inuit peoples of the Arctic and Subarctic have been challenged by the impacts of climate change on the abundance of key subsistence species. Responses to climate-induced declines in animal populations included switching to alternative food sources and/or migrating to regions of greater availability. We examine these dynamics for the Chugach Inuit (Sugpiat) people of southern coastal Alaska by synthesizing a large body of evidence from archeological sites, including radiocarbon dates and archaeofaunal assemblages, and by applying contemporary knowledge of glaciomarine ecosystems, spatial patterns of resource richness, and ocean-climate induced regime shifts in the Gulf of Alaska. We hypothesize that Chugach groups migrated from Cook Inlet and Prince William Sound to the Kenai Peninsula during periods of low sea surface temperatures (SSTs) to harvest harbor seals, which were seasonally aggregated near tidewater glaciers during pupping season, as well as piscivorous seabirds, Pacific cod, and other species that thrive under cool ocean conditions. During warming phases, the Chugach returned to Cook Inlet and Prince William Sound to fish for salmon and other species that abound during higher SSTs. Drivers of this coupled human-natural system of repeated (pulse) migration include the Pacific Decadal Oscillation (PDO), the dominant pattern of sea surface temperatures in the North Pacific that has been shown to generate step-like regime shifts in the marine food web; and coastal glaciers that structure the functioning of fiord ecosystems and support high levels of biological productivity. The culturally-constructed Chugach niche in the glaciomarine habitat of the Gulf of Alaska was based on intergenerationally transmitted ecological knowledge that enabled a resilient, mobile response to climate and resource variation.

Alaska↗
USGS1987

Lower Paleozoic carbonate rocks of the Baird Mountains quadrangle, western Brooks Range, Alaska

Lower Paleozoic carbonate rocks in the Baird Mountains quadrangle form a relatively thin, chiefly shallow-water succession that has been thrust-faulted and metamorphosed to blueschist and greenschist facies. Although this succession was thought to be mostly Devonian until recently, a large part of it is in fact pre-Silurian in age. Middle and Upper Cambrian rocks - the first confirmed in the western Brooks Range - occur in the northeastern quarter of the quadrangle, south of Mt. Angayukaqsraq. These rocks consist of massive marble that grades upward into thin-bedded metalimestone/dolostone couplets and contain pelagiellid mollusks, acrotretid brachiopods, and agnostids. Sedimentologic features and the Pefagiellas indicate a shallow-water depositional environment. Overlying these Cambrian rocks is a thin sequence of Lower arid Middle Ordovician metalimestone and phyllite containing graptolites and cool-water, mid-shelf to basinal conodonts. Upper Ordovician rocks in the Mt. Angayukaqsraq area are bioturbated to laminated dolostone containing conodonts of warm-, shallow-water biofacies. In the Omar and Squirrel Rivers area to the west, the Lower Ordovician carbonate rocks are thicker and quite different in lithofacies and biofacies. These rocks are mainly dolostone with locally well-developed fenestral fabric and evaporite molds, and bioturbated to laminated orange- and gray-weathering dolomitic marble and metalimestone. Conodonts and sedimentary structures indicate deposition in restricted to normal marine, shallow to very shallow water platform environments. Exposures of Upper Silurian rocks occur near Mi. Angayukaqsraq and on the middle fork of the Squirrel River, and consist mostly of thinly laminated dolomitic mudstones. Conodonts in these rocks indicate deposition in a somewhat restricted, shallow-water environment. Devonian carbonate rocks are widely distributed in the western Baird Mountains quadrangle; at least two distinct sequences have been identified. In the Omar and Squirrel Rivers area, Lower and Middle Devonian dolostone, metalimestone and marble are locally cherty and rich in megafossils. To the north, in the Nakolik River area, Middle and Upper Devonian marble and metalimestone are interlayered with planar- to cross-laminated quartz-carbonate metasandstone and phyllite. Baird Mountains carbonate rocks show some striking similarities in biofacies and lithofacies to lower Paleozoic carbonate rocks of the Seward Peninsula to the southwest and the central Brooks Range to the east.

Alaska↗
USGS2011

A new geological framework for south-central Madagascar, and its relevance to the "out-of-Africa" hypothesis

The Precambrian shield of south-central Madagascar, excluding the Vohibory region, consists of three geologic domains, from north to south: Antananarivo, Ikalamavony-Itremo, and Anosyen-Androyen. The northern Antananarivo domain represents the Neoarchean sector of the Greater Dharwar Craton amalgamated at 2.52-2.48. Ga. The Greater Dharwar Craton is overlain by several groups of Meso- to Neoproterozoic supracrustal rocks (Ambatolampy, Manampotsy, Ampasary, Sahantaha, and Maha Groups) each with a common and diagnostic signature of Paleoproterozoic detrital zircons (2.2-1.8. Ga). The central domain (Ikalamavony-Itremo) consists of two distinct parts. The Itremo Sub-domain, in the east, is a structurally intercalated sequence of Neoarchean gneiss and shallow marine metasedimentary rocks of Paleo-Mesoproterozoic age (Itremo Group), the latter with Paleoproterozoic detrital zircons ranging in age between 2.2 and 1.8. Ga. The Ikalamavony Sub-domain, to the west, contains abundant volcano-clastic metasediments and lesser quartzite (Ikalamavony Group), formed between 1.03. Ga and 0.98. Ga, and intruded by igneous rocks (Dabolava Suite) of Stenian-Tonian age. Structurally intercalated with these are sheets of Neoarchean gneiss (~2.5. Ga) and Neoproterozoic metaclastic rocks (Molo Group). Like the Itremo Group, quartzite of the Ikalamavony Group has detrital zircons of Paleoproterozoic age (2.1-1.8. Ga). The southern domain of Anosyen-Androyen consists of a newly recognized suite of Paleoproterozoic igneous rocks (2.0-1.8. Ga), and stratified supracrustal rocks also having Paleoproterozoic detrital zircons (2.3-1.8. Ga). The contact between the Anosyen-Androyen and Ikalamavony-Itremo domains, formerly known as the Ranotsara-Bongolava shear zone, is a tightly folded and highly flattened boundary that was ductilely deformed in Ediacaran time. It is roughly equivalent to the Palghat-Cauvery shear zone in south India, and it defines approximately the boundary between the Archean Greater Dharwar Craton (to the north) and the Paleoproterozoic terrane of Anosyen-Androyen (to the south).

Precambrian Research↗
USGS1994

Deep structure beneath Lake Ontario: Crustal-scale Grenville subdivisions

Lake Ontario marine seismic data reveal major Grenville crustal subdivisions beneath central and southern Lake Ontario separated by interpreted shear zones that extend to the lower crust. A shear zone bounded transition between the Elzevir and Frontenac terranes exposed north of Lake Ontario is linked to a seismically defined shear zone beneath central Lake Ontario by prominent aeromagnetic and gravity anomalies, easterly dipping wide-angle reflections, and fractures in Paleozoic strata. We suggest the central Lake Ontario zone represents crustal-scale deformation along an Elzevir–Frontenac boundary zone that extends from outcrop to the south shore of Lake Ontario.Seismic images from Lake Ontario and the exposed western Central Metasedimentary Belt are dominated by crustal-scale shear zones and reflection geometries featuring arcuate reflections truncated at their bases by apparent east-dipping linear reflections. The images show that zones analogous to the interpreted Grenville Front Tectonic Zone are also present within the Central Metasedimentary Belt and support models of northwest-directed crustal shortening for Grenvillian deep crustal deformation beneath most of southeastern Ontario.A Precambrian basement high, the Iroquoian high, is defined by a thinning of generally horizontal Paleozoic strata over a crestal area above the basement shear zone beneath central Lake Ontario. The Iroquoian high helps explain the peninsular extension into Lake Ontario forming Prince Edward County, the occurrence of Precambrian inlier outcrops in Prince Edward County, and Paleozoic fractures forming the Clarendon–Linden structure in New York.

Lake Ontario↗
USGS1979

Quaternary crustal deformation along a major branch of the San Andreas fault in central California

Deformed marine terraces and alluvial deposits record Quaternary crustal deformation along segments of a major, seismically active branch of the San Andreas fault which extends 190 km SSE roughly parallel to the California coastline from Bolinas Lagoon to the Point Sur area. Most of this complex fault zone lies offshore (mapped by others using acoustical techniques), but a 4-km segment (Seal Cove fault) near Half Moon Bay and a 26-km segment (San Gregorio fault) between San Gregorio and Point Ano Nuevo lie onshore. At Half Moon Bay, right-lateral slip and N—S horizontal compression are expressed by a broad, synclinal warp in the first (lowest: 125 ka?) and second marine terraces on the NE side of the Seal Cove fault. This structure plunges to the west at an oblique angle into the fault plane. Linear, joint0controlled stream courses draining the coastal uplands are deflected toward the topographic depression along the synclinal axis where they emerge from the hills to cross the lowest terrace. Streams crossing the downwarped part of this terrace adjacent to Half Moon Bay are depositing alluvial fans, whereas streams crossing the uplifted southern limb of the syncline southwest of the bay are deeply incised. Minimum crustal shortening across this syncline parallel to the fault is 0.7% over the past 125 ka, based on deformation of the shoreline angle of the first terrace. Between San Gregorio and Point Ano Nuevo the entire fault zone is 2.5–3.0 km wide and has three primary traces or zones of faulting consisting of numerous en-echelon and anastomozing secondary fault traces. Lateral discontinuities and variable deformation of well-preserved marine terrace sequences help define major structural blocks and document differential motions in this area and south to Santa Cruz. Vertical displacement occurs on all of the fault traces, but is small compared to horizontal displacement. Some blocks within the fault zone are intensely faulted and steeply tilted. One major block 0.8 km wide east of Point Ano Nuevo is downdropped as much as 20 m between two primary traces to form a graben presently filling with Holocene deposits. Where exposed in the sea cliff, these deposits are folded into a vertical attitude adjacent to the fault plane forming the south-west margin of the graben. Near Point Ano Nuevo sedimentary deposits and fault rubble beneath a secondary high-angle reverse fault record three and possibly six distinct offset events in the past 125 ka. The three primary fault traces offset in a right-lateral sense the shoreline angles of the two lowest terraces east of Point Ano Nuevo. The rates of displacement on the three traces are similar. The average rate of horizontal offset across the entire zone is between 0.63 and 1.30 cm/yr, based on an amino-acid age estimate of 125 ka for the first terrace, and a reasonable guess of 200–400 ka for the second terrace. Rates of this magnitude make up a significant part of the deficit between long-term relative plate motions (estimated by others to be about 6 cm/yr) and present displacement rates along other parts of the San Andreas fault system (about 3.2 cm/yr). Northwestward tilt and convergence of six marine terraces northeast of Ano Nuevo (southwest side of the fault zone) indicate continuous gentle warping associated with right-lateral displacement since early or middle Pleistocene time. Minimum local crustal shortening of this block parallel to the fault is 0.2% based on tilt of the highest terrace. Five major, evenly spaced terraces southeast of Ano Nuevo on the southwest flank of Mt. Ben Lomond (northeast side of the fault zone) rise to an elevation of 240 m, indicating relatively constant uplift (about 0.19 m/ka and southwestward tilt since Early or Middle Pleistocene time (Bradley and Griggs, 1976).

California↗
USGS1983

Structure maps and seismic stratigraphy of the Yakataga segment of the continental margin, northern Gulf of Alaska

Multichannel seismic-reflection data show the late Cenozoic structure, seismic stratigraphy, and geologic history of the Yakataga segment of the continental margin, between Icy Bay and Kayak Island, northern Gulf of Alaska. The structure of the Yakataga segment consists of broad folds and associated thrust faults beneath the continental shelf and slope, trending generally northeast in the eastern part of the s~gment to east-west in the western part. Anticlines are generally asymmetric and doubly plunging and are commonly bounded on the seaward side by high-angle thrust faults. The degree of deformation is less intense than is observed in adjacent onshore areas. The age of deformation decreases seaward and the deformation shows an overall southeastward migration with time. Structures of similar age define three structural zones; structural growth was roughly contemporaneous in each structural zone, although the local growth pattern is complex in detail. Deformation within each structural zone was followed by subsidence and burial by rapidly deposited marine sediment. Deformation appears to have been continuous during the late Cenozoic, rather than a series of discrete events, because subsidence of a particular structural zone is accompanied by initiation of growth on a younger, more seaward zone. Varying degrees of reactivation of the older structures within recent time have resulted in renewed uplift of these structures. Average sedimentation, uplift, and subsidence rates are all extremely high, and generally range from about 1 to 2 m/1,000 yr; these rates can locally be much higher. The average strike of structures in the Yakataga segment indicates northwest-southeastward compression and is consistent with the current convergence direction between the Pacific and North America plates. Observed shortening within the segment is much less than required by the late Cenozoic convergence rate (about 6 cm/yr), and the major deformation is taken up elsewhere, primarily onshore. Thus, the deformation of the Yakataga segment is caused by minor shortening of the continental margin between Cross Sound and Kayak Island, which together comprise the Yakutat block, as the margin moves northwestward with the Pacific plate and collides with the North America plate.

Alaska↗
USGS2002

Sea otter population structure and ecology in Alaska

Sea otters are the only fully marine otter. They share a common ancestry with the Old World land otters, but their route of dispersal to the New World is uncertain. The historic range of the species is along the northern Pacific Ocean rim, between central Baja California and the islands of northern Japan. Because they forage almost exclusively on bottom-dwelling marine invertebrates such as clams, snails, crabs, and sea urchins, they predominantly occur near shore. Their offshore distribution is limited by their diving ability; although they are capable of diving to more than 100 meters deep, most of their feeding takes place between the shoreline and depths of 40 meters. They are social animals, generally resting in protected bays or kelp forests in groups, commonly referred to as rafts. Because they are gregarious, possess a fine fur, and occur primarily near shore, they have been exploited by humans for as long as they have co-occupied coastal marine communities. During the late Pleistocene, glacial advances and retreats in the northern latitudes likely influenced genetic exchange within the sea otter’s northern range. When the glaciers were at their maximum, ice sheets extended over large coastal areas, isolating sea otter populations and causing local extinctions. During periods of glacial retreat, sea otters likely recolonized the newly available habitats, allowing exchange of individuals and gene flow between populations. Beginning in about 1750, sea otter populations underwent dramatic declines as a direct result of commercial harvest for their furs. Explorations by Vitus Bering led to the discovery of abundant sea otter populations in the Aleutian Islands. The early harvest, conducted by Russians with enslaved Aleut hunters, began in the eastern Aleutians. Eventually the harvest became multinational and contributed significantly to the exploration and settlement of the North Pacific coastline by Europeans. There were two distinct periods of harvest—one reaching its peak about 1800 and averaging about 15,000 per year and a second about 1870, averaging about 4,000 per year. The causes for this harvest pattern are unknown, but it may represent two distinct periods of overexploitation separated by a brief period of population recovery. By 1890 the species had been eliminated throughout most of its range, persisting in small numbers at 13 isolated locations in California, Alaska, and Russia. The number of sea otters that survived the fur trade is unknown, but available data suggest that some remnant populations may have been as small as a few dozen individuals. In 1911, sea otters were afforded protection under the International Fur Seal Treaty, and populations apparently responded by gradually increasing in abundance. The rates of population recovery varied among locations, averaging 9% annually and ranging from 6 to 13%. The population at Amchitka Island in the central Aleutians had the highest growth rate among those surviving, apparently reaching carrying capacity by about 1950. Efforts to aid the recovery of the species into the vast unoccupied habitats between California and Prince William Sound began in 1965. Sea otters from Amchitka and Prince William Sound were translocated to Oregon, Washington, British Columbia, and several locations in southeastern Alaska. With the exception of Oregon, these translocations have resulted in the establishment of successful colonies. Population growth rates of translocated sea otters have been significantly greater than among remnant populations, averaging 21% and ranging from 18 to 24%. We don’t know why the growth rates of the remnant and translocated populations are so different, but it may be partly because of the abundant food and space available at the translocated sites. The varying patterns of sea otter population decline and recovery provide a unique and powerful tool for studying the effects of historic reductions on populations, as well as how populations respond to varying environmental conditions. During the past decade, using molecular genetics, researchers have been trying to understand how sea otter populations might differ throughout the North Pacific and what effects population reductions and recovery have had on population genetics. Also, as a result of the varying degree of recovery among isolated populations, we have the opportunity to contrast life history attributes (such as condition, reproduction, and survival) among populations throughout their range. These contrasts may be useful in developing methods to assess the status of populations where traditional methods of surveying abundance are difficult and expensive.

Alaska↗
USGS1963

Geology of the Anlauf and Drain Quadrangles, Douglas and Lane Counties, Oregon

The Anlauf and Drain quadrangles, Oregon, lie about 20 miles south of the city of Eugene, in Douglas and Lane Counties. They constitute an area of about 435 square miles that includes parts of both the Cascade Range and Coast Range physiographic provinces. A sequence of lower Tertiary sedimentary and volcanic rocks with a maximum thickness of about 20,000 feet is exposed in the area. The oldest part of this sequence is the Umpqua formation of early Eocene age consisting of a lower member of vesicular and amygdaloidal olivine basalt flows, a middle member of water-laid vitric and lapilli crystal tuff, and an upper member of interbedded fissile siltstone and basaltic sandstone which contains a 300-foot tongue of massive to thick-bedded basaltic sandstone near its top. These rocks are predominantly of marine origin, although the general absence of pillow structures which are common in basaltic lavas of equivalent age elsewhere in the Coast Ranges suggests that some of the flows were poured out subaerially. The overlying tuff member, however, contains Foraminifera and in places has a lime content slightly in excess of 10 percent. Mollusca and Foraminifera indicate that the Umpqua formation is of early Eocene age and is a correlative of the Capay formation of California. The Tyee formation of middle Eocene age overlies the Umpqua formation and consists of more than 5,000 feet of rhythmically deposited sandstone and siltstone in beds 2 to 30 feet thick. The basal part of each bed consists of medium- to coarse-grained sandstone that grades upward into fine-grained sand- stone and siltstone. The principal constituents of the sandstone are quartz, partly a1tered feldspar, mica, clay, and fragments of basalt, fine-grained argillaceous rocks, and mica schist. Other detrital minerals include epidote, garnet, blue-green hornblende, tourmaline, and zoisite. The depositional environment of the Tyee formation is poorly known, although the rhythmic-graded bedding suggests turbidity currents. About 500 feet of sandstone and siltstone assigned to the Spencer formation of late Eocene age unconformably overlies the Tyee formation. The Spencer formation, better exposed in the east-central part of the Coast Ranges, contains marine fossils but also has thin impure coal beds, indicative of strand-line accumulation. The sandstone in the Spencer formation is very similar to that in the Tyee formation, from which it was probably derived. The Fisher formation contains about 5,500 feet of nonmarine pyroclastic and volcanic rocks that are related to the volcanic rock sequences of the western Cascade Range. The formation is characterized by a wide variety of rock types, including conglomerate, tuffaceous sandstone and siltstone, vitric and crystal tuff, waterlaid and mudflow breccia, and andesitic lava flows. These rocks gen- erally occur in lenticular beds that have little stratigraphic significance. The rocks apparently accumulated on a plain slightly above sea level that was subjected alternately to fiooding by running water and to desiccation. Fossil leaves from the lowermost part of the Fisher formation are of late Eocene age; the upper part of the formation is of early, and possibly niiddle, Oligocene age. A few exposures of olivine basalt were mapped in the extreme northern part of the Anlauf quadrangle. The flows, more extensively exposed to the north, overlie the Fisher formation, and, therefore, are tentatively considered to be post-Oligocene in age. All these stratigraphic units, but principally the Fisher formation, are cut by dikes, sills, and stocklike bodies of 'porphyritic basalt, diabase, and norite. Contemporaneously with the emplacement of most of these rocks, in late Miocene (?) time, hydrothermal solutions locailly altered the sedimentary and extrusive igneous racks and deposited cinnabar and other sulfide minerals, carbonates, and silica. Three parallel nartheastward-trending

Bulletin↗
USGS1993

Landslides triggered by the storm of November 3-5, 1985, Wills Mountain Anticline, West Virginia and Virginia

More than 3,000 landslides were triggered by heavy rainfall in the central Appalachian Mountains of West Virginia and Virginia, November 3-5, 1985. These landslides provided the opportunity to study spatial controls on landslides, magnitude and frequency of triggering events, and the effects of landslides on flood-induced geomorphic change. The study area consists of parts of the Wills Mountain anticline, a major NE-trending structure in the central Appalachians, and a portion of the adjacent Appalachian Plateau. Across the anticline and adjacent plateau, bedrock lithologies vary markedly and include pure marine limestone, marine shale, deltaic mudstone/sandstone sequences, and orthoquartzites. Because of the geologic structure, bedrock lithology varies little along strike. The spatial distribution of landslides triggered by the storm was controlled primarily by rainfall, bedrock lithology, surficial lithology, land cover, and slope morphology. The triggering rainfall was of moderate intensity and long duration. Two-day storm totals varied from 170 mm to more than 240 mm in the study area. Most landslides occurred at the northeast end of the study area, where 48-h rainfall totals were in excess of 200 mm. Different rainfall thresholds are apparent for triggering landslides on different bedrock lithologies. The highest density of landslides occurred in shallow colluvium and residuum of the Reedsville Shale (Ordovician), followed by regolith of the Greenbriar and Mauch Chunk Groups (Mississippian). Most of the landslides in these fine-grained regoliths were shallow slides and slumps, many of which transformed to mudflows and delivered sediment directly to streams; a smaller number of debris avalanches were triggered high on quartzite ridges. Instability of colluvium and residuum derived from the Reedsville Shale, compared with regolith from four other fine-grained bedrock lithologies, is attributable to its low strength combined with moderate infiltration rates that allowed soil moisture to accumulate under the moderate intensities of the rainfall. Slopes covered by coarse, cobbly debris flow and alluvial deposits, mostly of Pleistocene age, were very stable due to their low slope angles and high frictional strength. For a particular bedrock lithology, the spatial distribution of landslides appears controlled by interdependent influences of slope morphology and land cover. On the Reedsville Shale, most landslides occurred on north- to northeast-facing slopes, which might have had higher antecedent levels of soil moisture; these slopes have also been preferentially cleared because they produce better pasture forage for livestock. A secondary concentration of landslides on south- to southwest-facing slopes cannot be explained by conventional soil-moisture models. Landslide density was 100--200 percent higher on cleared land than on forested land. On pastured land, most landslides occurred on laterally planar slopes, but on forested land, most landslides occurred in slope positions that were laterally concave (hillslope hollows). Compared with other documented Appalachian storms that have triggered landslides, the November 1985 storm had lower rainfall intensities over longer durations. Comparison with these other storms suggests that the anomalously high degree of slope instability in 1985 is due to the long duration of low-intensity rainfall on fine-grained regolith derived from shale; the triggering rainfall can be approximated by the 48-h storm total. Landslide density in Reedsville Shale regolith is linearly related to the varying 48-h rainfall along the anticline. These data define a probabilistic model that estimates return intervals of 43 to 300 yr for landslide densities ranging from 1 to 70 landslides/km 2 . Analysis of flood-induced geomorphic changes in 79 small drainage basins that received 210-240 mm of rainfall showed a clear local association between landslides and channel erosion or deposition adjacent to where the landslides delivered sediment to the stream. When channel change was quantified using an index evaluated at each basin mouth, most of the channel change was attributable to the influence of basin morphology on flood discharge. Landslide density in the basins was of secondary, although measurable, importance in explaining flood-induced channel changes at the basin scale.

Virginia↗
USGS2024

Artificial structure selection by economically important reef fishes at North Carolina artificial reefs

Artificial reefs can play an important role in marine fisheries management by supplementing or enhancing natural habitats. Despite their increased use in recent years, the choice of structures used at artificial reefs remains largely haphazard due to the lack of information on reef structure performance. Few studies have examined the use of different artificial reef structures by individual fish. From 2021-2022, we acoustically tagged 72 black sea bass ( Centropristis striata ), 34 gag ( Mycteroperca mircrolepis ), 27 greater amberjack ( Seriola dumerili ), nine almaco jack ( S. rivoliana ), and eight red snapper ( Lutjanus campechanus ) on four artificial reef complexes near Cape Lookout, North Carolina, U.S. Available artificial reef structures consisted of materials of various sizes and heights made of concrete and metal. We tracked tagged fish using a fine-scale positioning system for ~100 days. Black sea bass exhibited high site fidelity to the artificial structure where we caught them, rarely moving away from that structure. The limited movement resulted in low transition probabilities; we conclude that black sea bass do not select for particular artificial structures. Gag and red snapper moved greater distances away from artificial structures and routinely moved between them. Greater amberjack and almaco jack moved the most within the complexes displaying circling behavior around individual structures and were the only species that regularly moved off the artificial reef complexes. Greater amberjack movements away from artificial sites were most commonly directed to surrounding shipwrecks. Whereas gag, red snapper, almaco jack, and greater amberjack used all available structures, they consistently selected for high relief structures, such as vessels, more than other structures. These results will be useful to managers charged with decisions on what types of structures to place at artificial reef complexes to supplement or enhance habitat for economically important fishes.

North Carolina↗
USGS2006

Relationships between reef fish communities and remotely sensed rugosity measurements in Biscayne National Park, Florida, USA

The realization that coral reef ecosystem management must occur across multiple spatial scales and habitat types has led scientists and resource managers to seek variables that are easily measured over large areas and correlate well with reef resources. Here we investigate the utility of new technology in airborne laser surveying (NASA Experimental Advanced Airborne Research Lidar (EAARL)) in assessing topographical complexity (rugosity) to predict reef fish community structure on shallow (<10 m deep) patch reefs. Marine portions of Biscayne National Park, Florida, USA, were surveyed remotely using the EAARL, and reef fish populations were visually surveyed on 10 patch reefs at independent, randomly selected stations ( n = 10–13 per reef). Rugosity at each station was assessed in situ by divers using the traditional chain-transect method (10-m scale), and remotely using the EAARL submarine topography data at multiple spatial scales (2, 5, and 10 m). The rugosity and biological datasets were analyzed together to elucidate the predictive power of EAARL rugosity in describing the variance in reef fish community variables and to assess the correlation between chain-transect and EAARL rugosity. EAARL rugosity was not well correlated with chain-transect rugosity, or with species richness of fishes (although statistically significant, the amount of variance explained by the model was very low). Variance in reef fish community attributes was better explained in reef-by-reef variability than by physical variables. However, once the reef-by-reef variability was taken into account in a two-way analysis of variance, the importance of rugosity could be seen on individual reefs. Fish species richness and abundance were statistically higher at high rugosity stations compared to medium and low rugosity stations, as predicted by prior ecological research. The EAARL shows promise as an important mapping tool for reef resource managers as they strive to inventory and protect coral reef resources.

Florida↗