SEARCH · Geology Reports

Results for “Journal of Structural Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources

USGS1975

Geology of Porcupine Mountains in Carp River and White Pine Quadrangles, Michigan

The Porcupine Mountains are the eroded remnants of the upper limb of an anticline that is faulted along most of its southern, overturned, limb. The exposed rocks include about 5,000 ft (1,525 m) of middle Keweenawan intermediate to mafic lava flows interbedded with subordinate lithic sedimentary rocks and also include about 3,000 ft (915 m) of overlying middle and upper Keweenawan sedimentary rocks. The sediments are derived from lower Keweenawan and older rocks. The structural relief is at least 8,000 ft (2,440 m) between the crest of the Porcupine Mountains anticline and the trough of the Iron River syncline about 5 mi (8 km) to the south. The reverse fault along the southern, overturned, limb of the anticline has a displacement of about 5,000 ft (1,525 m).

Michigan↗

USGS2007

Lithology-derived structure classification from the joint interpretation of magnetotelluric and seismic models

Magnetotelluric and seismic methods provide complementary information about the resistivity and velocity structure of the subsurface on similar scales and resolutions. No global relation, however, exists between these parameters, and correlations are often valid for only a limited target area. Independently derived inverse models from these methods can be combined using a classification approach to map geologic structure. The method employed is based solely on the statistical correlation of physical properties in a joint parameter space and is independent of theoretical or empirical relations linking electrical and seismic parameters. Regions of high correlation (classes) between resistivity and velocity can in turn be mapped back and re-examined in depth section. The spatial distribution of these classes, and the boundaries between them, provide structural information not evident in the individual models. This method is applied to a 10 km long profile crossing the Dead Sea Transform in Jordan. Several prominent classes are identified with specific lithologies in accordance with local geology. An abrupt change in lithology across the fault, together with vertical uplift of the basement suggest the fault is sub-vertical within the upper crust. ?? 2007 The Authors Journal compilation ?? 2007 RAS.

Geophysical Journal International↗

USGS2007

Mississippi embayment aquifer system in Mississippi: Geohydrologic data compilation for flow model simulation

As part of the Gulf Coast Regional Aquifer System Analysis (GC RASA) study, data from 184 geophysical well logs were used to define the geohydrologic framework of the Mississippi embayment aquifer system in Mississippi for flow model simulation. Five major aquifers of Eocene and Paleocene age were defined within this aquifer system in Mississippi. A computer data storage system was established to assimilate the information obtained from the geophysical logs. Computer programs were developed to manipulate the data to construct geologic sections and structure maps. Data from the storage system will be input to a five-layer, three-dimensional, finite-difference digital computer model that is used to simulate the flow dynamics in the five major aquifers of the Mississippi embayment aquifer system.

Mississippi↗

USGS1999

Predicting ground-water movement in large mine spoil areas in the Appalachian Plateau

Spoil created by surface mining can accumulate large quantities of ground-water, which can create geotechnical or regulatory problems, as well as flood active mine pits. A current study at a large (4.1 km2), thick, (up to 90 m) spoil body in eastern Kentucky reveals important factors that control the storage and movement of water. Ground-water recharge occurs along the periphery of the spoil body where surface-water drainage is blocked, as well as from infiltration along the spoil-bedrock contact, recharge from adjacent bedrock, and to a minor extent, through macropores at the spoil's surface. Based on an average saturated thickness of 6.4 m for all spoil wells, and assuming an estimated porosity of 20%, approximately 5.2 x 106 m3 of water is stored within the existing 4.1 km2 of reclaimed spoil. A conceptual model of ground-water flow, based on data from monitoring wells, dye-tracing data, discharge from springs and ponds, hydraulic gradients, chemical data, field reconnaissance, and aerial photographs indicate that three distinct but interconnected saturated zones have been established: one in the spoil's interior, and others in the valley fills that surround the main spoil body at lower elevations. Ground-water movement is sluggish in the spoil's interior, but moves quickly through the valley fills. The conceptual model shows that a prediction of ground-water occurrence, movement, and quality can be made for active or abandoned spoil areas if all or some of the following data are available: structural contour of the base of the lowest coal seam being mined, pre-mining topography, documentation of mining methods employed throughout the mine, overburden characteristics, and aerial photographs of mine progression.Spoil created by surface mining can accumulate large quantities of ground-water, which can create geotechnical or regulatory problems, as well as flood active mine pits. A current study at a large (4.1 km2), thick, (up to 90 m) spoil body in eastern Kentucky reveals important factors that control the storage and movement of water. Ground-water recharge occurs along the periphery of the spoil body where surface-water drainage is blocked, as well as from infiltration along the spoil-bedrock contact, recharge from adjacent bedrock, and to a minor extent, through macropores at the spoil's surface. Based on an average saturated thickness of 6.4 m for all spoil wells, and assuming an estimated porosity of 20%, approximately 5.2 ?? 106 m3 of water is stored within the existing 4.1 km2 of reclaimed spoil. A conceptual model of ground-water flow, based on data from monitoring wells, dye-tracing data, discharge from springs and ponds, hydraulic gradients, chemical data, field reconnaissance, and aerial photographs indicate that three distinct but interconnected saturated zones have been established: one in the spoil's interior, and others in the valley fills that surround the main spoil body at lower elevations. Ground-water movement is sluggish in the spoil's interior, but moves quickly through the valley fills. The conceptual model shows that a prediction of ground-water occurrence, movement, and quality can be made for active or abandoned spoil areas if all or some of the following data are available: structural contour of the base of the lowest coal seam being mined, pre-mining topography, documentation of mining methods employed throughout the mine, overburden characteristics, and aerial photographs of mine progression.

International Journal of Coal Geology↗

USGS1973

The fractionation of humic acids from natural water systems

Humic acids, the most abundant organic components of natural water systems, are complex mixtures of molecular aggregates of different chemical and physical properties. The first step in the study of such a mixture is the fractionation of the mixture. The most common approach with humic acids is to attempt to obtain a molecular weight fractionation by gel-permeation chromatography. However, since the preponderance of evidence indicates that the components of humic acid do not fulfill the basic criteria of uniform shape and chemical structure necessary for obtaining a molecular fractionation on gel-permeation media, molecular weight distributions in humic acids cannot be evaluated by this method. A fractionation dependent upon chemical structure can be obtained by the manipulation of elution conditions on a gel-permeation column. This procedure provides a beginning in the isolation and identification of discrete components of humic acids.

Journal of Research of the U.S. Geological Survey↗

USGS1977

Middle Tertiary plutonism in the Santa Catalina and Tortolita mountains, Arizona

Recent reconnaissance geologic mapping in the Santa Catalina and Tortolita Mountains of southeastern Arizona, supplemented by new and published potassium-argon and fission-track ages, suggests that a large composite batholith of middle Tertiary (about 25 million years) age crops out extensively in both mountains. More than two-thirds of the batholith and contiguous wallrocks is gneissic, the gneissosity comprising strong cataclasis and mylonitization, penetrative planar and linear structures, and crystallization of muscovite and biotite in the foliation planes. New radiometric ages indicate that the deformation followed the crystallization of the batholith so closely that the K-Ar dating method cannot distinguish a difference, whereas previously published ages from the gneisses indicate a short time between the two events.

Arizona↗

USGS2007

High-pressure amphibolite facies dynamic metamorphism and the Mesozoic tectonic evolution of an ancient continental margin, east- central Alaska

Ductilely deformed amphibolite facies tectonites comprise two adjacent terranes in east-central Alaska: the northern, structurally higher Taylor Mountain terrane and the southern, structurally lower Lake George subterrane of the Yukon-Tanana terrane. The pressure, temperature, kinematic and age data are interpreted to indicate that the metamorphism of the Taylor Mountain terrane and Lake George subterrane took place during different phases of a latest Palaeozoic through early Mesozoic shortening episode resulting from closure of an ocean basin now represented by klippen of the Seventymile-Slide Mountain terrane. High- to intermediate-pressure metamorphism of the Taylor Mountain terrane took place within a SW-dipping (present-day coordinates) subduction system. High- to intermediate-pressure metamorphism of the Lake George subterrane and the structural contact zone occurred during NW-directed overthrusting of the Taylor Mountain, Seventymile-Slide Mountain and Nisutlin terranes, and imbrication of the continental margin in Jurassic time. -from Authors

Alaska↗

USGS2014

Executive summary

Fossil fuels from the Appalachian basin region have been major contributors to the Nation’s energy needs over much of the last three centuries. Early records indicate that Appalachian coal was first mined in the middle 1700s (Virginia and Pennsylvania) and was used sparingly to fuel colonial settlements and, later, a fledgling industrial-based economy along the eastern seaboard of the United States (de Witt and Milici, 1989). In 2011, central Appalachian basin coal production accounted for approximately 77 percent of all U.S. metallurgical (or coking) coal and 29 percent of total U.S. production (U.S. Energy Information Administration, 2013). Following initial discoveries and commercial use in western New York (1821) and Ohio and West Virginia (mid-1830s), the Appalachian petroleum (oil and gas) industry began in earnest in 1859 with the discovery of oil at the Drake well in northwestern Pennsylvania. Between 1860 and 1989, the Appalachian basin produced more than 2.5 billion barrels of oil (BBO) and more than 30 trillion cubic feet of gas (TCFG) from more than 500,000 wells (de Witt and Milici, 1989). Although both oil and gas continue to be produced in the Appalachian basin, most new wells in the region are drilled in shale reservoirs to produce natural gas. Appalachian coal and petroleum resources are still available in sufficient quantities to contribute significantly to the Nation’s energy needs. For example, the U.S. Energy Information Administration (2010) estimated that there are 6,484 million short tons of recoverable coal reserves in the Appalachian basin. Similarly, about 14.7 billion barrels of oil equivalent (BBOE) (1.2 BBO+81 TCFG [or 13.5 BBOE]) of recoverable Appalachian basin oil and gas remain available of an estimated ultimate endowment of approximately 25.5 billion BBOE (cumulative production + reserves + estimated recoverable undiscovered resources) (this volume, chap. C.1). U.S. Geological Survey (USGS) Professional Paper 1708 is a modern, indepth collection of reports, cross sections, and maps that describe the geology of the Appalachian basin and its fossil fuel resources. Several of the chapters have been published in outside journals or as other USGS publications. Although this volume is not a comprehensive regional treatment of all notable geologic and fossil fuel localities in the Appalachian basin, the selected study areas and topics presented in the chapters cover large segments of the basin and a wide range of stratigraphic intervals. As the title implies, this volume addresses topics that refer to the locations of coal and petroleum accumulations, the stratigraphic and structural framework, and the geochemical characteristics of the coal beds and petroleum in the basin, as well as the results and documentation of recent USGS assessments of coal, oil, and gas resources in the basin. Many of the maps and accompanying data supporting the reports in this volume are available as downloadable geographic information system (GIS) data files (such as selected coal beds, selected oil and gas fields, locations of oil and gas wells, coal production, coal chemistry, total petroleum system (TPS) boundaries, and bedrock geology). Log ASCII Standard (LAS) files for geophysical (gamma ray) wireline well logs also are included. This publication supplements and updates older USGS regional studies of Appalachian basin coal and petroleum resources such as those by Arndt and others (1968) and the numerous contributors to USGS Miscellaneous Map Series I−917 (for example, Harris and others, 1978), respectively. USGS Professional Paper 1708 is intended primarily for geoscientists in academia, industry, and government who are interested in Appalachian basin geology and its coal and petroleum resources. Other users, however, may find the wide variety of topics, papers, and digital images of value for landuse and policy planning issues. Among the anticipated benefits of the report are improvements in (1) resource assessment estimates and methodology, (2) exploration strategies, (3) basin models, and (4) energy use policies.

Appalachian Basin↗

USGS1985

Vp/Vs ratios in the Yellowstone National Park region, Wyoming

In this paper we study the variation of Vp/Vs and Poisson's ratio (??) in the Yellowstone National Park region, using earthquakes which were well recorded by a local seismic network. We find that the average Vp/Vs value within the geothermally active Yellowstone caldera is about 7% lower than in the area outside the caldera. Within the caldera itself there may be a further 2-7% reduction of Vp/Vs in the hydrothermally active Norris Geyser Basin, the Upper and Lower Geyser Basins, and the Yellowstone Lake and Mud Volcano regions. After considering various possible causes for Vp/Vs changes, such as geologic and structural differences, thermal effects, partial melting, and hydrothermal activity, we conclude that the most plausible explanation for the observed Vp/Vs reduction is the presence of hot-water at temperatures and pore-pressures near the water steam transition in the caldera geothermal reservoirs. ?? 1985.

Journal of Volcanology and Geothermal Research↗

USGS1990

A geochemical sampling technique for use in areas of active alpine glaciation: an application from the central Alaska Range

In mountainous regions containing extensive glacier systems there is a lack of suitable material for conventional geochemical sampling. As a result, in most geochemical sampling programs a few stream-sediment samples collected at, or near, the terminus of valley glaciers are used to evaluate the mineral potential of the glaciated area. We have developed and tested a technique which utilizes the medial moraines of valley glaciers for systematic geochemical exploration of the glacial catchment area. Moraine sampling provides geochemical information that is site-specific in that geochemical anomalies can be traced directly up-ice to bedrock sources. Traverses were made across the Trident and Susitna glaciers in the central Alaska Range where fine-grained (clay to sand size) samples were collected from each medial moraine. These samples were prepared and chemically analyzed to determine the concentration of specific elements. Fifty pebbles were collected at each moraine for archival purposes and for subsequent lithologic identification. Additionally, fifty cobbles and fifty boulders were examined and described at each sample site to determine the nature and abundance of lithologies present in the catchment area, the extent and nature of visible mineralization, the presence and intensity of hydrothermal alteration and the existence of veins, dikes and other minor structural features. Results from the central Alaska Range have delineated four distinct multi-element anomalies which are a response to potential mineralization up-ice from the medial moraine traverse. By integrating the lithologic, mineralogical and geochemical data the probable geological setting of the geochemical anomalies is determined.

Journal of Geochemical Exploration↗

USGS2012

Intrusion of horizontal dikes: tectonic significance of Middle Proterozoic diabase sheets widespread in the upper crust of the southwestern United States

Initially horizontal sheet intrusions of Middle Proterozoic diabase are abundant in a region 650 by 300 km across in Arizona and California. The diabase forms discordant sheets in basement granite and gneiss and sills in overlying shelf sedimentary sequences. Massive granite is the most common basement host for the sheets, probably because it fractured more easily than foliated hosts during sheet emplacement. Steep feeder dikes are rare compared to the sheets. The diabase in many places is exposed in fault blocks that were tilted during Tertiary tectonic extension. Structure sections restored from the map patterns of upended blocks show that the sheets were intruded at levels throughout the upper crust, to depths of at least 13 km. Sheet intrusion implies a vertical orientation of the least compressive stress, so I conclude that the crust was under tectonic compression or in an isotropic state of stress at the time of diabase intrusion about 1.1 Ga. Magma overpressures, water encountered by rising magma, vertical changes in the crustal stress regime, and flotation of low-density granite all may be important factors for sheet intrusion. The stress conditions suggested by the presence of the sheets argue against an extensional tectonic regime earlier proposed for the diabase event. The diabase province contrasts structurally with similar-age provinces of basaltic magmatism elsewhere in North America that show evidence of tectonic extension, such as the midcontinent rift. The consistent orientations of the sheets commonly allow them to be used as structural markers for postdiabase deformation of basement blocks. Sheet intrusions in the geologic record may be seriously underreported. Their recognition is important for the interpretation of seismic reflection profiles of continental crust. Sheets in Arizona may be responsible for the Bagdad reflection sequence, which extends to depths of at least 15 km.

Journal of Geophysical Research↗

USGS2007

A three-dimensional geophysical model of the crust in the Barents Sea region: Model construction and basement characterization

BARENTS50, a new 3-D geophysical model of the crust in the Barents Sea Region has been developed by the University of Oslo, NORSAR and the U.S. Geological Survey. The target region comprises northern Norway and Finland, parts of the Kola Peninsula and the East European lowlands. Novaya Zemlya, the Kara Sea and Franz-Josef Land terminate the region to the east, while the Norwegian-Greenland Sea marks the western boundary. In total, 680 1-D seismic velocity profiles were compiled, mostly by sampling 2-D seismic velocity transects, from seismic refraction profiles. Seismic reflection data in the western Barents Sea were further used for density modelling and subsequent density-to-velocity conversion. Velocities from these profiles were binned into two sedimentary and three crystalline crustal layers. The first step of the compilation comprised the layer-wise interpolation of the velocities and thicknesses. Within the different geological provinces of the study region, linear relationships between the thickness of the sedimentary rocks and the thickness of the remaining crystalline crust are observed. We therefore, used the separately compiled (area-wide) sediment thickness data to adjust the total crystalline crustal thickness according to the total sedimentary thickness where no constraints from 1-D velocity profiles existed. The BARENTS50 model is based on an equidistant hexagonal grid with a node spacing of 50 km. The P -wave velocity model was used for gravity modelling to obtain 3-D density structure. A better fit to the observed gravity was achieved using a grid search algorithm which focussed on the density contrast of the sediment-basement interface. An improvement compared to older geophysical models is the high resolution of 50 km. Velocity transects through the 3-D model illustrate geological features of the European Arctic. The possible petrology of the crystalline basement in western and eastern Barents Sea is discussed on the basis of the observed seismic velocity structure. The BARENTS50 model is available at http://www.norsar.no/seismology/barents3d/ .

Geophysical Journal International↗

USGS1977

Cauldron subsidence of Oligocene age at Mount Lewis, Shoshone Range, Nevada: A reasonable interpretation

James Gilluly has rejected the interpretation of Wrucke and Silberman (U.S. Geol. Survey Prof. Paper 876, 1975) that a thrust fault and tear fault mapped by Gilluly and Gates (U.S. Geol. Survey Prof. Paper 465, 1965) as structures bounding the upper plate of the Roberts Mountains thrust at Mount Lewis are parts of a ring fracture around an area that underwent volcanic collapse. In his discussion (this volume) of our paper, Gilluly fails to consider important questions that we presented in support of the subsidence hypothesis. Instead of answering these critical questions, Gilluly merely recapitulates the interpretations that he and Gates gave in Professional Paper 465. We presented new information, including a map of one critical area along the cauldron boundary where, among other significant differences in geologic interpretation, we found the ring fault where previously no steep fault was shown. Gilluly believes that the paucity of dikes along the ring fracture at Mount Lewis is highly anomalous for cauldrons. However, the amount of dike rock is comparable to that in known cauldrons (some cauldrons have none) and is what might be expected at high levels in subsidence structures that have undergone relatively little resurgent igneous activity after collapse. Gilluly concludes that in formulating our interpretation of volcanic collapse, we have ignored much evidence that he and Gates have presented on thrust faulting; in the Shoshone Range. On the contrary, we have considered their ideas and have reinterpreted them using new evidence that strongly supports the concept of cauldron subsidence at Mount Lewis.

Nevada↗

USGS2018

Annotated bibliography of scientific research on greater sage-grouse published since January 2015

The greater sage-grouse ( Centrocercus urophasianus ; hereafter GRSG) has been a focus of scientific investigation and management action for the past two decades. The 2015 U.S. Fish and Wildlife Service listing determination of “not warranted” was in part due to a large-scale collaborative effort to develop strategies to conserve GRSG populations and their habitat and to reduce threats to both. New scientific information augments existing knowledge and can help inform updates or modifications to existing plans for managing GRSG and sagebrush ecosystems. However, the sheer number of scientific publications can be a challenge for managers tasked with evaluating and determining the need for potential updates to existing planning documents. To assist in this process, the U.S. Geological Survey (USGS) has reviewed and summarized the scientific literature published since January 1, 2015. To identify articles and reports published about GRSG, we first conducted a structured search of three reference databases (Web of Science, Scopus, and Google Scholar) using the search term “greater sage-grouse.” We refined the initial list of products by (1) removing duplicates, (2) excluding products that were not published as research or scientific review articles in peer-reviewed journals or as formal government technical reports, and (3) retaining only those products for which GRSG or their habitat was a research focus. We summarized the contents of each product by using a consistent structure (background, objectives, methods, location, findings, and implications) and assessed the content of each product relevant to a list of 31 management topics. These topics include GRSG biology and habitat characteristics along with potential management actions, land uses, and environmental factors related to GRSG management and conservation. We also noted which articles/reports created new geospatial data. The final search was conducted on January 6, 2018, and application of our criteria resulted in the inclusion of 169 published products (2 of these products were published corrections to journal articles). The management topics most commonly addressed were GRSG behavior or demographics and GRSG habitat selection or habitat characteristics at broad or site scales. Few products addressed captive breeding, recreation, wild horses and burros, and range management structures (including fences). We include in this annotated bibliography the full citation, product summary, and management topics addressed by each product. The online version of this bibliography ( https://apps.usgs.gov/gsgbib/index.php ) is searchable by topic and location and includes links to the original publications. A substantial body of literature has been compiled based on research explicitly related to the conservation, management, monitoring, and assessment of GRSG. These studies may inform planning and management actions that seek to balance conservation, economic, and social objectives and manage diverse resource uses and values across the western United States. The review process for this product included requesting input on each summary from one or more authors of the original peer-reviewed article or report and a formal review of the entire document by three independent reviewers and, subsequently, the USGS Bureau Approving Official. This process is consistent with USGS Fundamental Science Practices.

Open-File Report↗

USGS2020

Quantifying model structural uncertainty using airborne electromagnetic data

The ability to quantify structural uncertainty in geological models that incorporate geophysical data is affected by two primary sources of uncertainty: geophysical parameter uncertainty and uncertainty in the relationship between geophysical parameters and geological properties of interest. Here, we introduce an open-source, trans-dimensional Bayesian Markov chain Monte Carlo (McMC) algorithm GeoBIPy—Geophysical Bayesian Inference in Python—for robust uncertainty analysis of time-domain or frequency-domain airborne electromagnetic (AEM) data. The McMC algorithm provides a robust assessment of geophysical parameter uncertainty using a trans-dimensional approach that lets the AEM data inform the level of model complexity necessary by allowing the number of model layers itself to be an unknown parameter. Additional components of the Bayesian algorithm allow the user to solve for parameters such as data errors or corrections to the measured instrument height above ground. Probability distributions for a user-specified number of lithologic classes are developed through posterior clustering of McMC-derived resistivity models. Estimates of geological model structural uncertainty are thus obtained through the joint probability of geophysical parameter uncertainty and the uncertainty in the definition of each class. Examples of the implementation of this algorithm are presented for both time-domain and frequency-domain AEM data acquired in Nebraska, USA.

Nebraska↗

USGS1976

Geology of the massifs at the Apollo 17 landing site

The Apollo 17 spacecraft landed in a narrow valley that embays mountainous terrain near the southeastern edge of Mare Serenitatis. Two overlapping basin structures underlie Mare Serenitatis: a larger one to the south and a smaller one to the north. The massifs and sculptured hills in the Taurus-Littrow area and the mountains and knobby terrain in the outer Rook ring (third ring) of the Orientale basin are similar in morphology ; the Apollo 17 site lies approximately on the third ring of the southern Serenitatis basin structure. Assuming the third ring represents the approximate rim of the transient cavity of the southern Serenitatis structure, we suggest that ejecta many kilometres thick was deposited in the Taurus-Littrow area by the southern Serenitatis impact. This ejecta is visible in the massifs in the Apollo 17 landing site as discontinuous, irregular lenses of variable lithology. The southern Serenitatis target rocks were predominantly breccias that were invaded by impact-generated melt and redeposited during the southern Serenitatis event.

Journal of Research of the U.S. Geological Survey↗

USGS2024

Characterization of the structural–stratigraphic and reservoir controls on the occurrence of gas hydrates in the Eileen Gas Hydrate Trend, Alaska North Slope

One of the most studied permafrost-associated gas hydrate accumulations in Arctic Alaska is the Eileen Gas Hydrate Trend. This study provides a detailed re-examination of the Eileen Gas Hydrate Trend with a focus on the gas hydrate accumulation in the western part of the Prudhoe Bay Unit. This integrated analysis of downhole well log data and published geophysical data has provided new insight on structural, stratigraphic, and reservoir controls on the occurrence of gas hydrates in the Eileen Gas Hydrate Trend. This study revealed the relatively complex nature of the gas hydrate occurrences in the Eileen Gas Hydrate Trend, with gas hydrates present in a series of coarsening upward, laterally pervasive, mostly fine-grained sand beds exhibiting high gas hydrate saturations. Most of the gas hydrate-bearing reservoirs in the Eileen Gas Hydrate Trend are laterally segmented into distinct northwest- to southeast-trending fault blocks, occur in a combination of structural–stratigraphic traps, and are only partially hydrate filled with distinct down-dip water contacts. These findings suggest that the traditional parts of a petroleum system (i.e., reservoir, gas source, gas migration, and geologic timing of the system formation) also control the occurrence of gas hydrates in the Eileen Gas Hydrate Trend.

Alaska↗

USGS1974

Distribution and occurrence of rare earths in the thorium veins on Hall Mountain, Idaho

Rare earths, although equal to or more abundant than thorium in many thorium veins, are much less abundant than thorium in the veins on Hall Mountain, Idaho. Total rare-earth content of these veins ranges from 0.00111 to 0.197 percent in 12 samples from 10 veins; the thoria (ThO 2 ) content, from 0.011 to 5.84 percent. The rare-earth oxide to thoria ratios range from 0.0019 to 3.22. Only two samples contained more rare earths than thorium, and these two samples came from veins related to a fault near the base of a thick sill; the others came from veins near the top of the same sill. The relative amounts of the individual lanthanides are remarkably similar in the Hall Mountain veins, although cerium, gadolinium, or dysprosium are the most abundant in different samples. These veins differ in lanthanide distribution both from the Earth's crust and from the thorium veins of the Lemhi Pass district, Idaho and Montana, in that they contain chiefly yttrium-group rare earths. Most of the rare earths occur in thorite, whose atomic structure will accommodate wide-ranging proportions of the rare earths. Cenosite, one of the few minerals with a high content of the yttrium group of rare earths, was found in one vein.

Idaho↗