SEARCH · Geology Reports
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This CD contains imagery collected by the Advanced Very High Resolution Radiometer (AVHRR) on the NOAA polar-orbiting weather satellites. The AVHRR provides almost daily coverage of a site at a resolution of approximately 1 km. The data types included are sea surface temperature (SST), water reflectance (REF), and a false-color infrared overview (FCI).
A study of the flood hydrology of Lucerne Valley, Calif., was undertaken to develop the 100-year stage for Lucerne Lake. Synthetic-hydrologic techniques were used because no adequate hydrologic or meteorologic data were available for the valley. The 100-year flood stage was estimated to be at an elevation of 2,849.3 feet above mean sea level.
The Needle Mountains district is set in highly fractured Precambrian granitic rocks that have intruded and metamorphosed older Precambrian metasedimentary rocks. The Precambrian rocks are overlain by outliers of Paleozoic strata and intruded by a late Tertiary stock. Past mineral production reportedly was limited to silver and gold ores presumably taken from small fissure veins. Although the economic potential of the district has not been adequately explored, some evidence indicates potential for base metal deposits.
Models of the spatiotemporal evolution of earthquake slip, termed finite-fault models, are a critical component of rapid earthquake and tsunami response, earthquake forecasting, seismic ground-motion estimates, and studies of earthquake kinematics. Here, we detail a newly released finite-fault modeling software, Wavelet Inversion for SliP (WISP), in use at the U.S. Geological Survey’s National Earthquake Information Center (NEIC) and available to the public. WISP version 1.1.0 allows inversion of teleseismic body and surface waves, as well as local strong-motion, static and dynamic Global Navigation Satellite System, and satellite imagery (e.g., Interferometric Synthetic Aperture Radar) observations on single or multiple planar fault segments. The software is used in NEIC rapid response of earthquakes M w ≥ 7, generally resulting in a published model within the first few hours after the event origin time. The rupture location and dimensions are then used as inputs to downstream products to estimate earthquake shaking, predict loss, and model the likelihood of secondary hazards, namely landslides and liquefaction. WISP is also used in research studies to evaluate the characteristics of complex ruptures including multifault ruptures and earthquake doublets, among others. The WISP version 1.1.0 software release is composed of Python-wrapped FORTRAN code to accomplish the inversion procedure. A simple command line interface facilitates ease of use even for those with only a cursory knowledge of Python scripting. WISP version 1.1.0 includes a Jupyter Notebook tutorial demonstrating use of the software for modeling the 2015 M w 8.3 Illapel, Chile, earthquake. In parallel with the tutorial, we demonstrate the typical usage of the WISP software using the M w 8.3 Illapel earthquake example here.
The distribution functions for statistics that may be used to assess the significance of differences between sample means, standard deviations, coefficients of skewness, and coefficients of variation are obtained by Monte Carlo experiments. The distributions are expressed as functions of sample size, cross correlation, and skewness. In general, the distributions are more sensitive to cross correlation than to skewness. As sample size increases, however, the distributions tend to become more sensitive to skewness.
This report provides an overview of the U.S. Geological Survey National Map Corps —Federal Emergency Management Agency and Oak Ridge National Laboratory pilot project in St. James Parish, Louisiana, that began in February 2024 and ended at the end of March 2024. The project used the power of The National Map Corps’ volunteer community to improve building classifications in the original Federal Emergency Management Agency’s U.S.A. Structures dataset. The report highlights the project’s completion and details the work and results achieved through a collaborative effort to enhance geospatial data quality and utility.
With the exception of values from two holes drilled within 2 km of Mickey Hot Springs, 17 new heat-flow values in southeastern Oregon are within or somewhat below the range one would normally expect in non-anomalous parts of the North American Cordillera. This is not surprising for a region in which most igneous rocks on the surface are 5 m.y. old or more. There is a suggestion of a thermal anomaly associated with the very young (late Pleistocene or Holocene) Diamond Craters lava field, and the thermal regime on both sides of Steens Mountain seems to be controlled, to some degree, by lateral and vertical movement of water.
The 2018 eruption of Kīlauea volcano in its Lower East Rift Zone began with the discharge of evolved high-Ti basalt as weak lava fountains and short, slow-moving lava flows. The lavas were quickly geochemically recognized as being derived from magmas stored within the rift zone and remobilized by a new intrusion, a sequence that is common at Kīlauea. This initial phase of the 2018 eruption, referred to as phase 1a, lasted for 6 days and was followed by extrusion of mixed magma after a 3-day pause. Even though remobilization of older rift zone magmas is common within Kīlauea’s rift zones, it is difficult to determine which past intrusion(s) may have initially emplaced those stored magmas. This difficulty stems from the tendency for Kīlauea magmas to follow very similar differentiation paths without significant variations in major, minor, or even trace element chemistry. We investigate possible magma sources for the lavas erupted during phase 1a of the 2018 eruption using whole-rock, mineral, and glass major and trace element compositions from historical East Rift Zone eruptions with adjacent fissures. We consider two primary hypotheses for the phase 1a source: magmas associated with the 1955 Lower East Rift Zone eruption or the nine eruptions in the Middle and Upper East Rift Zone during the 1960s. Our results suggest that magma associated with the earliest phases of Kīlauea’s 1955 eruption was the most likely source of the 2018 phase 1a remobilized magma. We determine volatile saturation pressures from melt inclusion chemistry and find similar storage depths for the 2018 phase 1a and early 1955 magmas. The phase 1a and early 1955 lavas are nearly indistinguishable in all of the compositional criteria considered, implying that the leftover 1955 magma body barely cooled and differentiated in the 63 years between eruptions (cooling rates of ~0.1 °C/year). This study sheds light on the potential for protracted storage of eruptible magmas in rift zones at Kīlauea, and highlights some of the challenges and solutions to identifying genetic relationships between magmas at Kīlauea.
A trench across the Dumfries fault of the Stafford fault zone near Stafford, Virginia (see Mixon and Newell, 1976) exposed a high-angle reverse fault juxtaposing Paleozoic Quantico Slate and Cretaceous Potomac Group rocks. A system of subsidiary reverse faults and small scale normal faults disrupt the Coastal Plain strata adjacent to the main fault. Cross-cutting relations and stratigraphic details indicate that the subsidiary faults in the Cretaceous rocks document a history of episodic deformation, in part active during accumulation of the Coastal Plain strata. Slickensides and stereo net analysis of theorientation of subsidiary reverse faults, normal faults, and bedding indicate that, through time, faulting consistently included right lateral separation.
Electronic particle counting and pipette size-analysis techniques are compared for their relative effectiveness in large-scale routine mud analysis. Optimum laboratory procedures for conducting electronic analyses with a Model TA Coulter Counter are presented. Comparative electronic and pipette analyses conducted on the same samples resulted in equivalent precision for both techniques. Results of electronic analyses consistently showed size distributions significantly coarser than those obtained by pipette analyses. The laboratory efficiency of the relatively rapid electronic technique is far superior to that of the pipette technique, although more extensive precautionary measures are required to maintain a high level of analytical accuracy and precision. The quality of electronic analyses largely depends upon the effectiveness of standardized operational procedures established within the laboratory.
Groundwater-quality trend assessments identify aquifers that are responding to changes in pesticide use and the compounds that may pose a threat to water availability. The U.S. Geological Survey has been monitoring pesticide concentrations in groundwater for 25 principal aquifers across the conterminous United States since 1993. The groundwater well locations represent a range of soils, climate, and landforms. The wells are used to monitor groundwater underlying selected agricultural and urban settings and groundwater used for domestic supply. This study examined changes in relative concentrations, defined here as the percentage of wells with pesticide concentrations exceeding a human health benchmark (HHB). HHBs used in this report are legally enforceable drinking-water standards and nonenforceable drinking water levels. Relative pesticide concentration increases may lead to decreased water availability, as restrictions may be put in place for groundwater used as a drinking-water source. This study focused on concentration changes in 22 pesticides that were included in laboratory analysis from 1993 to 2023. The analysis and interpretation of these pesticide concentrations in groundwater have been separated into approximate decadal intervals (decade 1 (1993–2001), decade 2 (2002–12), and decade 3 (2013–22). For one pesticide, 1,2-dibromo-3-chloropropane (DBCP), concentration data were also collected in decade 4 (2023–onward). Atrazine, deethylatrazine, alachlor, prometon, and simazine were 5 pesticides detected at moderate concentrations (greater than 10 percent of the HHB but less than or equal to the HHB). The percentage of wells that had groundwater pesticide concentrations in the moderate concentration category decreased from 7 percent in decade 1 to 2 percent in decade 3. The agricultural networks had the highest percentages of wells with moderate concentrations, and these percentages decreased from 13 percent in decade 1 to 4 percent in decade 3. Moderate concentrations in the urban networks decreased between decades 1 and 2 from 4 percent to 0 percent. No moderate concentrations occurred in the urban networks in decade 3. The percentage of wells with moderate concentrations in the domestic supply networks (1 percent) was the lowest of all the network types and did not change across the three decades. Moderate atrazine or deethylatrazine concentrations occurred across all three decades in aggregated ecoregions representing similar soils, climate, and landforms in the Semiarid West, Midcontinent, and Northeastern United States. Moderate concentrations of prometon, alachlor, and simazine also occurred in the Midcontinent, Arid West, Northeast, South Atlantic Gulf, and Semiarid West regions, but the moderate concentrations did not persist across all three decades. DBCP was the only pesticide that exceeded its respective HHB, and the exceedances occurred across all four decades. In this report, the DBCP analysis was limited to one well network in the Central Valley, California. Agricultural use of DBCP was suspended in 1977. Forty-five years after being banned, DBCP concentrations were greater than the maximum contaminant level of 2 micrograms per liter (μg/L), but the number of exceedances decreased from 50 percent to 15 percent of the samples between 1993 and 2023. This assessment of decadal groundwater pesticide concentrations provides a characterization of changes in water availability because of pesticide contamination in areas where groundwater is used as a drinking-water source. The results highlight the importance of continued long-term monitoring and assessment of groundwater pesticides to identify locations and specific compounds that may pose a potential risk to human health.
This report documents a previously unmapped fault, informally referred to herein as the North Meadow Creek fault, on the east flank of the Tobacco Mountains of southwestern Montana. This fault has an apparently long and complex history, including Quaternary offset of an older alluvial terrace, offset of a debris flow of presumed Pleistocene age, offset of rhyolite lava flows of presumed Tertiary age from their presumed source several kilometers east, on the opposite side of the fault, and offset and possible rotation of blocks of Archean gneiss on northeast side of the fault. The western part of the fault is covered by glacial moraines of two apparent ages, both Pleistocene.
We present a simple method to estimate the risk of experiencing strong shaking from aftershocks during entry into earthquake-damaged buildings. We compute wait times until the probability of strong ground shaking from aftershocks reaches a predefined risk threshold; for example, a 0.4 percent probability of experiencing Modified Mercalli Intensity 7 or greater shaking during the planned building entry. We also develop a relation between aftershock probability and the probability of strong shaking, so that users can reference the U.S. Geological Survey aftershock forecast during an ongoing aftershock sequence to determine if the risk threshold has been met. We apply our method to active continental regions (for example, the Western United States), stable continental regions (for example, the Central and Eastern United States), and subduction zones (for example, Cascadia or Alaska).
Thirty-seven samples of rocks, saprolite, laterite, gossan, and slag were collected in the Yemen Arab Republic during June-July 1975 when field work was conducted to refine an interpretation of the regional geology made from LANDSAT-1 images by M. J. Grolier. These samples we reanalyzed in the laboratories of the U. S. Geological Survey, and the results were interpreted for use in programs of economic development as a guide for the evaluation of mineral resources in the Yemen Arab Republic. The work was undertaken as part of the program of the U. S. Agency for International Development with the cooperation of the Mineral and Petroleum Authority, Ministry of Economy, Yemen Arab Republic.
The fission-track technique has been applied to uranium analysis of natural waters using a single drop of water. Samples may be collected in the field by evaporating a drop of water on a detector, and samples may then be analyzed by returning the detector to the laboratory. A sample collecting kit has been assembled, which facilitates the designed sampling method. Some unique advantages of this technique are picogram sensitivity (10 -12 g) for uranium on single drops of water, maintenance of sample integrity during transport and storage, and the ability to discern whether the uranium is in solution or in the suspended material. Counting the tracks is the most time-consuming part of the analysis, but it can be reduced by using automatic counting systems. The analytical error is generally ± 10 percent over the entire range of concentrations.
The Ma'millah gold mine is about 90 km southeast of At Ta'if at lat 21°03'N., long 41°18'E., in southwestern Saudi Arabia. The deposit, which was worked extensively by ancient miners, consists of several veins and massive lenses of quartz along a regional fault. The extensive ancient mine workings, large size of some quartz outcrops, and significant gold content of several samples indicated that subsurface exploration was warranted. Accordingly, two holes were drilled into the deposit during the interval December 1972 to February 1973. The drill findings were disappointing; the grade of vein material was found to be too low to be of economic interest and the quartz bodies were found to pinch out both along strike and downdip. The drilling program therefore was terminated. The deposit is not worth further exploration
Tungsten appears on the 2018 and 2022 U.S. Geological Survey critical mineral lists in part because of a very high global production concentration in China, which produces almost 83 percent of the world’s mined tungsten. Using known parameters and values from other tungsten mining operations, we created hypothetical scenarios in which three tungsten deposits in Uzbekistan are considered for development. Our results show that all three deposits are likely to be economically viable to develop under 2024 market conditions. If the three studied tungsten deposits were put into production, Uzbekistan could become the third-leading tungsten-producing country in the world and increase world output of tungsten by 2.7 percent. Putting these tungsten deposits in Uzbekistan into production could slightly reduce the tungsten global market concentration, therefore reducing the supply disruption potential for tungsten.
This circular presents a strategic outlook for the U.S. Geological Survey (USGS) Albuquerque Seismological Laboratory (ASL) for the next 10 years (2026–36). The ASL is a USGS field office in the Geological Hazards Science Center that operates portions of the Advanced National Seismic System and the Global Seismographic Network and focuses on fundamental research for instrumentation testing and data quality. The strategic outlook is categorized into two types of tasks: “Foundational Tasks” and “Aspirational Tasks.” Foundational Tasks are those that maintain the laboratory’s basic operations and services, including regional and global seismic monitoring, improving data quality, and providing instrument testing and support. A suite of Aspirational Tasks is also articulated; these can be considered priority targets of ASL that could improve ASL’s seismic monitoring capabilities and mission. Such tasks include improvements to remote stations, testing capabilities of nonseismic geophysical instruments, detection threshold monitoring, rapid aftershock deployments, and expanding seismic monitoring networks. This report was written with input from the USGS Geological Hazards Science Center, the USGS Earthquake Hazards Program (EHP), and colleagues with an interest in the work done by the ASL. Although the details of these tasks may change, this document can provide guidance on the overarching tasks at the ASL from 2026 to 2036 and an overview of the various components of the ASL and how they fit into the EHP and the Global Seismographic Network Program.